Quickstart ========== Lets assume we have created a project directory and already have a Haskell module or two. Every project needs a name, we'll call this example "proglet". .. highlight:: console :: $ cd proglet/ $ ls Proglet.hs It is assumed that (apart from external dependencies) all the files that make up a package live under a common project root directory. This simple example has all the project files in one directory, but most packages will use one or more subdirectories. To turn this into a Cabal package we need two extra files in the project's root directory: - ``proglet.cabal``: containing package metadata and build information. - ``Setup.hs``: usually containing a few standardized lines of code, but can be customized if necessary. We can create both files manually or we can use ``cabal init`` to create them for us. Using "cabal init" ------------------ The ``cabal init`` command is interactive. It asks us a number of questions starting with the package name and version. :: $ cabal init Package name [default "proglet"]? Package version [default "0.1"]? ... It also asks questions about various other bits of package metadata. For a package that you never intend to distribute to others, these fields can be left blank. One of the important questions is whether the package contains a library or an executable. Libraries are collections of Haskell modules that can be re-used by other Haskell libraries and programs, while executables are standalone programs. :: What does the package build: 1) Library 2) Executable Your choice? For the moment these are the only choices. For more complex packages (e.g. a library and multiple executables or test suites) the ``.cabal`` file can be edited afterwards. Finally, ``cabal init`` creates the initial ``proglet.cabal`` and ``Setup.hs`` files, and depending on your choice of license, a ``LICENSE`` file as well. :: Generating LICENSE... Generating Setup.hs... Generating proglet.cabal... You may want to edit the .cabal file and add a Description field. As this stage the ``proglet.cabal`` is not quite complete and before you are able to build the package you will need to edit the file and add some build information about the library or executable. Editing the .cabal file ----------------------- .. highlight:: cabal Load up the ``.cabal`` file in a text editor. The first part of the ``.cabal`` file has the package metadata and towards the end of the file you will find the :pkg-section:`executable` or :pkg-section:`library` section. You will see that the fields that have yet to be filled in are commented out. Cabal files use "``--``" Haskell-style comment syntax. (Note that comments are only allowed on lines on their own. Trailing comments on other lines are not allowed because they could be confused with program options.) If you selected earlier to create a library package then your ``.cabal`` file will have a section that looks like this: :: library exposed-modules: Proglet -- other-modules: -- build-depends: Alternatively, if you selected an executable then there will be a section like: :: executable proglet -- main-is: -- other-modules: -- build-depends: The build information fields listed (but commented out) are just the few most important and common fields. There are many others that are covered later in this chapter. Most of the build information fields are the same between libraries and executables. The difference is that libraries have a number of "exposed" modules that make up the public interface of the library, while executables have a file containing a ``Main`` module. The name of a library always matches the name of the package, so it is not specified in the library section. Executables often follow the name of the package too, but this is not required and the name is given explicitly. Modules included in the package ------------------------------- For a library, ``cabal init`` looks in the project directory for files that look like Haskell modules and adds all the modules to the :pkg-field:`library:exposed-modules` field. For modules that do not form part of your package's public interface, you can move those modules to the :pkg-field:`other-modules` field. Either way, all modules in the library need to be listed. For an executable, ``cabal init`` does not try to guess which file contains your program's ``Main`` module. You will need to fill in the :pkg-field:`executable:main-is` field with the file name of your program's ``Main`` module (including ``.hs`` or ``.lhs`` extension). Other modules included in the executable should be listed in the :pkg-field:`other-modules` field. Modules imported from other packages ------------------------------------ While your library or executable may include a number of modules, it almost certainly also imports a number of external modules from the standard libraries or other pre-packaged libraries. (These other libraries are of course just Cabal packages that contain a library.) You have to list all of the library packages that your library or executable imports modules from. Or to put it another way: you have to list all the other packages that your package depends on. For example, suppose the example ``Proglet`` module imports the module ``Data.Map``. The ``Data.Map`` module comes from the ``containers`` package, so we must list it: :: library exposed-modules: Proglet other-modules: build-depends: containers, base == 4.* In addition, almost every package also depends on the ``base`` library package because it exports the standard ``Prelude`` module plus other basic modules like ``Data.List``. You will notice that we have listed ``base == 4.*``. This gives a constraint on the version of the base package that our package will work with. The most common kinds of constraints are: - ``pkgname >= n`` - ``pkgname >= n && < m`` - ``pkgname == n.*`` The last is just shorthand, for example ``base == 4.*`` means exactly the same thing as ``base >= 4 && < 5``. Building the package -------------------- For simple packages that's it! We can now try configuring and building the package: .. code-block:: console $ cabal configure $ cabal build Assuming those two steps worked then you can also install the package: .. code-block:: console $ cabal install For libraries this makes them available for use in GHCi or to be used by other packages. For executables it installs the program so that you can run it (though you may first need to adjust your system's ``$PATH``). Next steps ---------- What we have covered so far should be enough for very simple packages that you use on your own system. The next few sections cover more details needed for more complex packages and details needed for distributing packages to other people. The previous chapter covers building and installing packages -- your own packages or ones developed by other people. Package concepts ================ Before diving into the details of writing packages it helps to understand a bit about packages in the Haskell world and the particular approach that Cabal takes. The point of packages --------------------- Packages are a mechanism for organising and distributing code. Packages are particularly suited for "programming in the large", that is building big systems by using and re-using code written by different people at different times. People organise code into packages based on functionality and dependencies. Social factors are also important: most packages have a single author, or a relatively small team of authors. Packages are also used for distribution: the idea is that a package can be created in one place and be moved to a different computer and be usable in that different environment. There are a surprising number of details that have to be got right for this to work, and a good package system helps to simply this process and make it reliable. Packages come in two main flavours: libraries of reusable code, and complete programs. Libraries present a code interface, an API, while programs can be run directly. In the Haskell world, library packages expose a set of Haskell modules as their public interface. Cabal packages can contain a library or executables or both. Some programming languages have packages as a builtin language concept. For example in Java, a package provides a local namespace for types and other definitions. In the Haskell world, packages are not a part of the language itself. Haskell programs consist of a number of modules, and packages just provide a way to partition the modules into sets of related functionality. Thus the choice of module names in Haskell is still important, even when using packages. Package names and versions -------------------------- All packages have a name, e.g. "HUnit". Package names are assumed to be unique. Cabal package names may contain letters, numbers and hyphens, but not spaces and may also not contain a hyphened section consisting of only numbers. The namespace for Cabal packages is flat, not hierarchical. Packages also have a version, e.g "1.1". This matches the typical way in which packages are developed. Strictly speaking, each version of a package is independent, but usually they are very similar. Cabal package versions follow the conventional numeric style, consisting of a sequence of digits such as "1.0.1" or "2.0". There are a range of common conventions for "versioning" packages, that is giving some meaning to the version number in terms of changes in the package. Section [TODO] has some tips on package versioning. The combination of package name and version is called the *package ID* and is written with a hyphen to separate the name and version, e.g. "HUnit-1.1". For Cabal packages, the combination of the package name and version *uniquely* identifies each package. Or to put it another way: two packages with the same name and version are considered to *be* the same. Strictly speaking, the package ID only identifies each Cabal *source* package; the same Cabal source package can be configured and built in different ways. There is a separate installed package ID that uniquely identifies each installed package instance. Most of the time however, users need not be aware of this detail. Kinds of package: Cabal vs GHC vs system ---------------------------------------- It can be slightly confusing at first because there are various different notions of package floating around. Fortunately the details are not very complicated. Cabal packages Cabal packages are really source packages. That is they contain Haskell (and sometimes C) source code. Cabal packages can be compiled to produce GHC packages. They can also be translated into operating system packages. GHC packages This is GHC's view on packages. GHC only cares about library packages, not executables. Library packages have to be registered with GHC for them to be available in GHCi or to be used when compiling other programs or packages. The low-level tool ``ghc-pkg`` is used to register GHC packages and to get information on what packages are currently registered. You never need to make GHC packages manually. When you build and install a Cabal package containing a library then it gets registered with GHC automatically. Haskell implementations other than GHC have essentially the same concept of registered packages. For the most part, Cabal hides the slight differences. Operating system packages On operating systems like Linux and Mac OS X, the system has a specific notion of a package and there are tools for installing and managing packages. The Cabal package format is designed to allow Cabal packages to be translated, mostly-automatically, into operating system packages. They are usually translated 1:1, that is a single Cabal package becomes a single system package. It is also possible to make Windows installers from Cabal packages, though this is typically done for a program together with all of its library dependencies, rather than packaging each library separately. Unit of distribution -------------------- The Cabal package is the unit of distribution. What this means is that each Cabal package can be distributed on its own in source or binary form. Of course there may dependencies between packages, but there is usually a degree of flexibility in which versions of packages can work together so distributing them independently makes sense. It is perhaps easiest to see what being "the unit of distribution" means by contrast to an alternative approach. Many projects are made up of several interdependent packages and during development these might all be kept under one common directory tree and be built and tested together. When it comes to distribution however, rather than distributing them all together in a single tarball, it is required that they each be distributed independently in their own tarballs. Cabal's approach is to say that if you can specify a dependency on a package then that package should be able to be distributed independently. Or to put it the other way round, if you want to distribute it as a single unit, then it should be a single package. Explicit dependencies and automatic package management ------------------------------------------------------ Cabal takes the approach that all packages dependencies are specified explicitly and specified in a declarative way. The point is to enable automatic package management. This means tools like ``cabal`` can resolve dependencies and install a package plus all of its dependencies automatically. Alternatively, it is possible to mechanically (or mostly mechanically) translate Cabal packages into system packages and let the system package manager install dependencies automatically. It is important to track dependencies accurately so that packages can reliably be moved from one system to another system and still be able to build it there. Cabal is therefore relatively strict about specifying dependencies. For example Cabal's default build system will not even let code build if it tries to import a module from a package that isn't listed in the ``.cabal`` file, even if that package is actually installed. This helps to ensure that there are no "untracked dependencies" that could cause the code to fail to build on some other system. The explicit dependency approach is in contrast to the traditional "./configure" approach where instead of specifying dependencies declaratively, the ``./configure`` script checks if the dependencies are present on the system. Some manual work is required to transform a ``./configure`` based package into a Linux distribution package (or similar). This conversion work is usually done by people other than the package author(s). The practical effect of this is that only the most popular packages will benefit from automatic package management. Instead, Cabal forces the original author to specify the dependencies but the advantage is that every package can benefit from automatic package management. The "./configure" approach tends to encourage packages that adapt themselves to the environment in which they are built, for example by disabling optional features so that they can continue to work when a particular dependency is not available. This approach makes sense in a world where installing additional dependencies is a tiresome manual process and so minimising dependencies is important. The automatic package management view is that packages should just declare what they need and the package manager will take responsibility for ensuring that all the dependencies are installed. Sometimes of course optional features and optional dependencies do make sense. Cabal packages can have optional features and varying dependencies. These conditional dependencies are still specified in a declarative way however and remain compatible with automatic package management. The need to remain compatible with automatic package management means that Cabal's conditional dependencies system is a bit less flexible than with the "./configure" approach. Portability ----------- One of the purposes of Cabal is to make it easier to build packages on different platforms (operating systems and CPU architectures), with different compiler versions and indeed even with different Haskell implementations. (Yes, there are Haskell implementations other than GHC!) Cabal provides abstractions of features present in different Haskell implementations and wherever possible it is best to take advantage of these to increase portability. Where necessary however it is possible to use specific features of specific implementations. For example a package author can list in the package's ``.cabal`` what language extensions the code uses. This allows Cabal to figure out if the language extension is supported by the Haskell implementation that the user picks. Additionally, certain language extensions such as Template Haskell require special handling from the build system and by listing the extension it provides the build system with enough information to do the right thing. Another similar example is linking with foreign libraries. Rather than specifying GHC flags directly, the package author can list the libraries that are needed and the build system will take care of using the right flags for the compiler. Additionally this makes it easier for tools to discover what system C libraries a package needs, which is useful for tracking dependencies on system libraries (e.g. when translating into Linux distribution packages). In fact both of these examples fall into the category of explicitly specifying dependencies. Not all dependencies are other Cabal packages. Foreign libraries are clearly another kind of dependency. It's also possible to think of language extensions as dependencies: the package depends on a Haskell implementation that supports all those extensions. Where compiler-specific options are needed however, there is an "escape hatch" available. The developer can specify implementation-specific options and more generally there is a configuration mechanism to customise many aspects of how a package is built depending on the Haskell implementation, the operating system, computer architecture and user-specified configuration flags. Developing packages =================== The Cabal package is the unit of distribution. When installed, its purpose is to make available: - One or more Haskell programs. - At most one library, exposing a number of Haskell modules. However having both a library and executables in a package does not work very well; if the executables depend on the library, they must explicitly list all the modules they directly or indirectly import from that library. Fortunately, starting with Cabal 1.8.0.4, executables can also declare the package that they are in as a dependency, and Cabal will treat them as if they were in another package that depended on the library. Internally, the package may consist of much more than a bunch of Haskell modules: it may also have C source code and header files, source code meant for preprocessing, documentation, test cases, auxiliary tools etc. A package is identified by a globally-unique *package name*, which consists of one or more alphanumeric words separated by hyphens. To avoid ambiguity, each of these words should contain at least one letter. Chaos will result if two distinct packages with the same name are installed on the same system. A particular version of the package is distinguished by a *version number*, consisting of a sequence of one or more integers separated by dots. These can be combined to form a single text string called the *package ID*, using a hyphen to separate the name from the version, e.g. "``HUnit-1.1``". .. Note:: Packages are not part of the Haskell language; they simply populate the hierarchical space of module names. In GHC 6.6 and later a program may contain multiple modules with the same name if they come from separate packages; in all other current Haskell systems packages may not overlap in the modules they provide, including hidden modules. Creating a package ------------------ Suppose you have a directory hierarchy containing the source files that make up your package. You will need to add two more files to the root directory of the package: :file:`{package}.cabal` a Unicode UTF-8 text file containing a package description. For details of the syntax of this file, see the section on `package descriptions`_. :file:`Setup.hs` a single-module Haskell program to perform various setup tasks (with the interface described in the section on :ref:`installing-packages`). This module should import only modules that will be present in all Haskell implementations, including modules of the Cabal library. The content of this file is determined by the :pkg-field:`build-type` setting in the ``.cabal`` file. In most cases it will be trivial, calling on the Cabal library to do most of the work. Once you have these, you can create a source bundle of this directory for distribution. Building of the package is discussed in the section on :ref:`installing-packages`. One of the purposes of Cabal is to make it easier to build a package with different Haskell implementations. So it provides abstractions of features present in different Haskell implementations and wherever possible it is best to take advantage of these to increase portability. Where necessary however it is possible to use specific features of specific implementations. For example one of the pieces of information a package author can put in the package's ``.cabal`` file is what language extensions the code uses. This is far preferable to specifying flags for a specific compiler as it allows Cabal to pick the right flags for the Haskell implementation that the user picks. It also allows Cabal to figure out if the language extension is even supported by the Haskell implementation that the user picks. Where compiler-specific options are needed however, there is an "escape hatch" available. The developer can specify implementation-specific options and more generally there is a configuration mechanism to customise many aspects of how a package is built depending on the Haskell implementation, the Operating system, computer architecture and user-specified configuration flags. :: name: Foo version: 1.0 library build-depends: base exposed-modules: Foo extensions: ForeignFunctionInterface ghc-options: -Wall if os(windows) build-depends: Win32 Example: A package containing a simple library ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The HUnit package contains a file ``HUnit.cabal`` containing: :: name: HUnit version: 1.1.1 synopsis: A unit testing framework for Haskell homepage: http://hunit.sourceforge.net/ category: Testing author: Dean Herington license: BSD3 license-file: LICENSE cabal-version: >= 1.10 build-type: Simple library build-depends: base >= 2 && < 4 exposed-modules: Test.HUnit.Base, Test.HUnit.Lang, Test.HUnit.Terminal, Test.HUnit.Text, Test.HUnit default-extensions: CPP and the following ``Setup.hs``: .. code-block:: haskell import Distribution.Simple main = defaultMain Example: A package containing executable programs ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: name: TestPackage version: 0.0 synopsis: Small package with two programs author: Angela Author license: BSD3 build-type: Simple cabal-version: >= 1.2 executable program1 build-depends: HUnit main-is: Main.hs hs-source-dirs: prog1 executable program2 main-is: Main.hs build-depends: HUnit hs-source-dirs: prog2 other-modules: Utils with ``Setup.hs`` the same as above. Example: A package containing a library and executable programs ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: name: TestPackage version: 0.0 synopsis: Package with library and two programs license: BSD3 author: Angela Author build-type: Simple cabal-version: >= 1.2 library build-depends: HUnit exposed-modules: A, B, C executable program1 main-is: Main.hs hs-source-dirs: prog1 other-modules: A, B executable program2 main-is: Main.hs hs-source-dirs: prog2 other-modules: A, C, Utils with ``Setup.hs`` the same as above. Note that any library modules required (directly or indirectly) by an executable must be listed again. The trivial setup script used in these examples uses the *simple build infrastructure* provided by the Cabal library (see `Distribution.Simple <../release/cabal-latest/doc/API/Cabal/Distribution-Simple.html>`__). The simplicity lies in its interface rather that its implementation. It automatically handles preprocessing with standard preprocessors, and builds packages for all the Haskell implementations. The simple build infrastructure can also handle packages where building is governed by system-dependent parameters, if you specify a little more (see the section on `system-dependent parameters`_). A few packages require `more elaborate solutions `_. Package descriptions -------------------- The package description file must have a name ending in "``.cabal``". It must be a Unicode text file encoded using valid UTF-8. There must be exactly one such file in the directory. The first part of the name is usually the package name, and some of the tools that operate on Cabal packages require this. In the package description file, lines whose first non-whitespace characters are "``--``" are treated as comments and ignored. This file should contain of a number global property descriptions and several sections. - The `package properties`_ describe the package as a whole, such as name, license, author, etc. - Optionally, a number of *configuration flags* can be declared. These can be used to enable or disable certain features of a package. (see the section on `configurations`_). - The (optional) library section specifies the `library`_ properties and relevant `build information`_. - Following is an arbitrary number of executable sections which describe an executable program and relevant `build information`_. Each section consists of a number of property descriptions in the form of field/value pairs, with a syntax roughly like mail message headers. - Case is not significant in field names, but is significant in field values. - To continue a field value, indent the next line relative to the field name. - Field names may be indented, but all field values in the same section must use the same indentation. - Tabs are *not* allowed as indentation characters due to a missing standard interpretation of tab width. - To get a blank line in a field value, use an indented "``.``" The syntax of the value depends on the field. Field types include: *token*, *filename*, *directory* Either a sequence of one or more non-space non-comma characters, or a quoted string in Haskell 98 lexical syntax. The latter can be used for escaping whitespace, for example: ``ghc-options: -Wall "-with-rtsopts=-T -I1"``. Unless otherwise stated, relative filenames and directories are interpreted from the package root directory. *freeform*, *URL*, *address* An arbitrary, uninterpreted string. *identifier* A letter followed by zero or more alphanumerics or underscores. *compiler* A compiler flavor (one of: ``GHC``, ``JHC``, ``UHC`` or ``LHC``) followed by a version range. For example, ``GHC ==6.10.3``, or ``LHC >=0.6 && <0.8``. Modules and preprocessors ^^^^^^^^^^^^^^^^^^^^^^^^^ Haskell module names listed in the :pkg-field:`library:exposed-modules` and :pkg-field:`library:other-modules` fields may correspond to Haskell source files, i.e. with names ending in "``.hs``" or "``.lhs``", or to inputs for various Haskell preprocessors. The simple build infrastructure understands the extensions: - ``.gc`` (:hackage-pkg:`greencard`) - ``.chs`` (:hackage-pkg:`c2hs`) - ``.hsc`` (:hackage-pkg:`hsc2hs`) - ``.y`` and ``.ly`` (happy_) - ``.x`` (alex_) - ``.cpphs`` (cpphs_) When building, Cabal will automatically run the appropriate preprocessor and compile the Haskell module it produces. For the ``c2hs`` and ``hsc2hs`` preprocessors, Cabal will also automatically add, compile and link any C sources generated by the preprocessor (produced by ``hsc2hs``'s ``#def`` feature or ``c2hs``'s auto-generated wrapper functions). Some fields take lists of values, which are optionally separated by commas, except for the :pkg-field:`build-depends` field, where the commas are mandatory. Some fields are marked as required. All others are optional, and unless otherwise specified have empty default values. Package properties ^^^^^^^^^^^^^^^^^^ These fields may occur in the first top-level properties section and describe the package as a whole: .. pkg-field:: name: package-name (required) The unique name of the package, without the version number. .. pkg-field:: version: numbers (required) The package version number, usually consisting of a sequence of natural numbers separated by dots. .. pkg-field:: cabal-version: >= x.y The version of the Cabal specification that this package description uses. The Cabal specification does slowly evolve, introducing new features and occasionally changing the meaning of existing features. By specifying which version of the spec you are using it enables programs which process the package description to know what syntax to expect and what each part means. For historical reasons this is always expressed using *>=* version range syntax. No other kinds of version range make sense, in particular upper bounds do not make sense. In future this field will specify just a version number, rather than a version range. The version number you specify will affect both compatibility and behaviour. Most tools (including the Cabal library and cabal program) understand a range of versions of the Cabal specification. Older tools will of course only work with older versions of the Cabal specification. Most of the time, tools that are too old will recognise this fact and produce a suitable error message. As for behaviour, new versions of the Cabal spec can change the meaning of existing syntax. This means if you want to take advantage of the new meaning or behaviour then you must specify the newer Cabal version. Tools are expected to use the meaning and behaviour appropriate to the version given in the package description. In particular, the syntax of package descriptions changed significantly with Cabal version 1.2 and the :pkg-field:`cabal-version` field is now required. Files written in the old syntax are still recognized, so if you require compatibility with very old Cabal versions then you may write your package description file using the old syntax. Please consult the user's guide of an older Cabal version for a description of that syntax. .. pkg-field:: build-type: identifier :default: ``Custom`` The type of build used by this package. Build types are the constructors of the `BuildType <../release/cabal-latest/doc/API/Cabal/Distribution-PackageDescription.html#t:BuildType>`__ type, defaulting to ``Custom``. If the build type is anything other than ``Custom``, then the ``Setup.hs`` file *must* be exactly the standardized content discussed below. This is because in these cases, ``cabal`` will ignore the ``Setup.hs`` file completely, whereas other methods of package management, such as ``runhaskell Setup.hs [CMD]``, still rely on the ``Setup.hs`` file. For build type ``Simple``, the contents of ``Setup.hs`` must be: .. code-block:: haskell import Distribution.Simple main = defaultMain For build type ``Configure`` (see the section on `system-dependent parameters`_ below), the contents of ``Setup.hs`` must be: .. code-block:: haskell import Distribution.Simple main = defaultMainWithHooks autoconfUserHooks For build type ``Make`` (see the section on `more complex packages`_ below), the contents of ``Setup.hs`` must be: .. code-block:: haskell import Distribution.Make main = defaultMain For build type ``Custom``, the file ``Setup.hs`` can be customized, and will be used both by ``cabal`` and other tools. For most packages, the build type ``Simple`` is sufficient. .. pkg-field:: license: identifier :default: ``AllRightsReserved`` The type of license under which this package is distributed. License names are the constants of the `License <../release/cabal-latest/doc/API/Cabal/Distribution-License.html#t:License>`__ type. .. pkg-field:: license-file: filename .. pkg-field:: license-files: filename list The name of a file(s) containing the precise copyright license for this package. The license file(s) will be installed with the package. If you have multiple license files then use the :pkg-field:`license-files` field instead of (or in addition to) the :pkg-field:`license-file` field. .. pkg-field:: copyright: freeform The content of a copyright notice, typically the name of the holder of the copyright on the package and the year(s) from which copyright is claimed. For example:: copyright: (c) 2006-2007 Joe Bloggs .. pkg-field:: author: freeform The original author of the package. Remember that ``.cabal`` files are Unicode, using the UTF-8 encoding. .. pkg-field:: maintainer: address The current maintainer or maintainers of the package. This is an e-mail address to which users should send bug reports, feature requests and patches. .. pkg-field:: stability: freeform The stability level of the package, e.g. ``alpha``, ``experimental``, ``provisional``, ``stable``. .. pkg-field:: homepage: URL The package homepage. .. pkg-field:: bug-reports: URL The URL where users should direct bug reports. This would normally be either: - A ``mailto:`` URL, e.g. for a person or a mailing list. - An ``http:`` (or ``https:``) URL for an online bug tracking system. For example Cabal itself uses a web-based bug tracking system :: bug-reports: https://github.com/haskell/cabal/issues .. pkg-field:: package-url: URL The location of a source bundle for the package. The distribution should be a Cabal package. .. pkg-field:: synopsis: freeform A very short description of the package, for use in a table of packages. This is your headline, so keep it short (one line) but as informative as possible. Save space by not including the package name or saying it's written in Haskell. .. pkg-field:: description: freeform Description of the package. This may be several paragraphs, and should be aimed at a Haskell programmer who has never heard of your package before. For library packages, this field is used as prologue text by :ref:`setup-haddock` and thus may contain the same markup as Haddock_ documentation comments. .. pkg-field:: category: freeform A classification category for future use by the package catalogue Hackage_. These categories have not yet been specified, but the upper levels of the module hierarchy make a good start. .. pkg-field:: tested-with: compiler list A list of compilers and versions against which the package has been tested (or at least built). .. pkg-field:: data-files: filename list A list of files to be installed for run-time use by the package. This is useful for packages that use a large amount of static data, such as tables of values or code templates. Cabal provides a way to `find these files at run-time `_. A limited form of ``*`` wildcards in file names, for example ``data-files: images/*.png`` matches all the ``.png`` files in the ``images`` directory. The limitation is that ``*`` wildcards are only allowed in place of the file name, not in the directory name or file extension. In particular, wildcards do not include directories contents recursively. Furthermore, if a wildcard is used it must be used with an extension, so ``data-files: data/*`` is not allowed. When matching a wildcard plus extension, a file's full extension must match exactly, so ``*.gz`` matches ``foo.gz`` but not ``foo.tar.gz``. A wildcard that does not match any files is an error. The reason for providing only a very limited form of wildcard is to concisely express the common case of a large number of related files of the same file type without making it too easy to accidentally include unwanted files. .. pkg-field:: data-dir: directory The directory where Cabal looks for data files to install, relative to the source directory. By default, Cabal will look in the source directory itself. .. pkg-field:: extra-source-files: filename list A list of additional files to be included in source distributions built with :ref:`setup-sdist`. As with :pkg-field:`data-files` it can use a limited form of ``*`` wildcards in file names. .. pkg-field:: extra-doc-files: filename list A list of additional files to be included in source distributions, and also copied to the html directory when Haddock documentation is generated. As with :pkg-field:`data-files` it can use a limited form of ``*`` wildcards in file names. .. pkg-field:: extra-tmp-files: filename list A list of additional files or directories to be removed by :ref:`setup-clean`. These would typically be additional files created by additional hooks, such as the scheme described in the section on `system-dependent parameters`_ Library ^^^^^^^ .. pkg-section:: library :synopsis: Library build information. Build information for libraries. There can be only one library in a package, and it's name is the same as package name set by global :pkg-field:`name` field. The library section should contain the following fields: .. pkg-field:: exposed-modules: identifier list :required: if this package contains a library A list of modules added by this package. .. pkg-field:: exposed: boolean :default: ``True`` Some Haskell compilers (notably GHC) support the notion of packages being "exposed" or "hidden" which means the modules they provide can be easily imported without always having to specify which package they come from. However this only works effectively if the modules provided by all exposed packages do not overlap (otherwise a module import would be ambiguous). Almost all new libraries use hierarchical module names that do not clash, so it is very uncommon to have to use this field. However it may be necessary to set ``exposed: False`` for some old libraries that use a flat module namespace or where it is known that the exposed modules would clash with other common modules. .. pkg-field:: reexported-modules: exportlist Supported only in GHC 7.10 and later. A list of modules to *reexport* from this package. The syntax of this field is ``orig-pkg:Name as NewName`` to reexport module ``Name`` from ``orig-pkg`` with the new name ``NewName``. We also support abbreviated versions of the syntax: if you omit ``as NewName``, we'll reexport without renaming; if you omit ``orig-pkg``, then we will automatically figure out which package to reexport from, if it's unambiguous. Reexported modules are useful for compatibility shims when a package has been split into multiple packages, and they have the useful property that if a package provides a module, and another package reexports it under the same name, these are not considered a conflict (as would be the case with a stub module.) They can also be used to resolve name conflicts. The library section may also contain build information fields (see the section on `build information`_). Cabal 2.0 and later support "internal libraries", which are extra named libraries (as opposed to the usual unnamed library section). For example, suppose that your test suite needs access to some internal modules in your library, which you do not otherwise want to export. You could put these modules in an internal library, which the main library and the test suite :pkg-field:`build-depends` upon. Then your Cabal file might look something like this: :: name: foo version: 1.0 license: BSD3 cabal-version: >= 1.23 build-type: Simple library foo-internal exposed-modules: Foo.Internal build-depends: base library exposed-modules: Foo.Public build-depends: foo-internal, base test-suite test-foo type: exitcode-stdio-1.0 main-is: test-foo.hs build-depends: foo-internal, base Internal libraries are also useful for packages that define multiple executables, but do not define a publically accessible library. Internal libraries are only visible internally in the package (so they can only be added to the :pkg-field:`build-depends` of same-package libraries, executables, test suites, etc.) Internal libraries locally shadow any packages which have the same name (so don't name an internal library with the same name as an external dependency.) Opening an interpreter session ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ While developing a package, it is often useful to make its code available inside an interpreter session. This can be done with the ``repl`` command: .. code-block:: console $ cabal repl The name comes from the acronym `REPL `__, which stands for "read-eval-print-loop". By default ``cabal repl`` loads the first component in a package. If the package contains several named components, the name can be given as an argument to ``repl``. The name can be also optionally prefixed with the component's type for disambiguation purposes. Example: .. code-block:: console $ cabal repl foo $ cabal repl exe:foo $ cabal repl test:bar $ cabal repl bench:baz Freezing dependency versions """""""""""""""""""""""""""" If a package is built in several different environments, such as a development environment, a staging environment and a production environment, it may be necessary or desirable to ensure that the same dependency versions are selected in each environment. This can be done with the ``freeze`` command: .. code-block:: console $ cabal freeze The command writes the selected version for all dependencies to the ``cabal.config`` file. All environments which share this file will use the dependency versions specified in it. Generating dependency version bounds """""""""""""""""""""""""""""""""""" Cabal also has the ability to suggest dependency version bounds that conform to `Package Versioning Policy`_, which is a recommended versioning system for publicly released Cabal packages. This is done by running the ``gen-bounds`` command: .. code-block:: console $ cabal gen-bounds For example, given the following dependencies specified in :pkg-field:`build-depends`: :: build-depends: foo == 0.5.2 bar == 1.1 ``gen-bounds`` will suggest changing them to the following: :: build-depends: foo >= 0.5.2 && < 0.6 bar >= 1.1 && < 1.2 Listing outdated dependency version bounds """""""""""""""""""""""""""""""""""""""""" Manually updating dependency version bounds in a ``.cabal`` file or a freeze file can be tedious, especially when there's a lot of dependencies. The ``cabal outdated`` command is designed to help with that. It will print a list of packages for which there is a new version on Hackage that is outside the version bound specified in the ``build-depends`` field. The ``outdated`` command can also be configured to act on the freeze file (both old- and new-style) and ignore major (or all) version bumps on Hackage for a subset of dependencies. The following flags are supported by the ``outdated`` command: ``--freeze-file`` Read dependency version bounds from the freeze file (``cabal.config``) instead of the package description file (``$PACKAGENAME.cabal``). ``--new-freeze-file`` Read dependency version bounds from the new-style freeze file (``cabal.project.freeze``) instead of the package description file. ``--simple-output`` Print only the names of outdated dependencies, one per line. ``--exit-code`` Exit with a non-zero exit code when there are outdated dependencies. ``-q, --quiet`` Don't print any output. Implies ``-v0`` and ``--exit-code``. ``--ignore`` *PACKAGENAMES* Don't warn about outdated dependency version bounds for the packages in this list. ``--minor`` *[PACKAGENAMES]* Ignore major version bumps for these packages. E.g. if there's a version 2.0 of a package ``pkg`` on Hackage and the freeze file specifies the constraint ``pkg == 1.9``, ``cabal outdated --freeze --minor=pkg`` will only consider the ``pkg`` outdated when there's a version of ``pkg`` on Hackage satisfying ``pkg > 1.9 && < 2.0``. ``--minor`` can also be used without arguments, in that case major version bumps are ignored for all packages. Examples: .. code-block:: console $ cd /some/package $ cabal outdated Outdated dependencies: haskell-src-exts <1.17 (latest: 1.19.1) language-javascript <0.6 (latest: 0.6.0.9) unix ==2.7.2.0 (latest: 2.7.2.1) $ cabal outdated --simple-output haskell-src-exts language-javascript unix $ cabal outdated --ignore=haskell-src-exts Outdated dependencies: language-javascript <0.6 (latest: 0.6.0.9) unix ==2.7.2.0 (latest: 2.7.2.1) $ cabal outdated --ignore=haskell-src-exts,language-javascript,unix All dependencies are up to date. $ cabal outdated --ignore=haskell-src-exts,language-javascript,unix -q $ echo $? 0 $ cd /some/other/package $ cabal outdated --freeze-file Outdated dependencies: HTTP ==4000.3.3 (latest: 4000.3.4) HUnit ==1.3.1.1 (latest: 1.5.0.0) $ cabal outdated --freeze-file --ignore=HTTP --minor=HUnit Outdated dependencies: HUnit ==1.3.1.1 (latest: 1.3.1.2) Executables ^^^^^^^^^^^ .. pkg-section:: executable name :synopsis: Exectuable build info section. Executable sections (if present) describe executable programs contained in the package and must have an argument after the section label, which defines the name of the executable. This is a freeform argument but may not contain spaces. The executable may be described using the following fields, as well as build information fields (see the section on `build information`_). .. pkg-field:: main-is: filename (required) The name of the ``.hs`` or ``.lhs`` file containing the ``Main`` module. Note that it is the ``.hs`` filename that must be listed, even if that file is generated using a preprocessor. The source file must be relative to one of the directories listed in :pkg-field:`hs-source-dirs`. .. pkg-field:: scope: token Whether the executable is ``public`` (default) or ``private``, i.e. meant to be run by other programs rather than the user. Private executables are installed into `$libexecdir/$libexecsubdir`. Running executables """"""""""""""""""" You can have Cabal build and run your executables by using the ``run`` command: .. code-block:: console $ cabal run EXECUTABLE [-- EXECUTABLE_FLAGS] This command will configure, build and run the executable ``EXECUTABLE``. The double dash separator is required to distinguish executable flags from ``run``'s own flags. If there is only one executable defined in the whole package, the executable's name can be omitted. See the output of ``cabal help run`` for a list of options you can pass to ``cabal run``. Test suites ^^^^^^^^^^^ .. pkg-section:: test name :synopsis: Test suit build information. Test suite sections (if present) describe package test suites and must have an argument after the section label, which defines the name of the test suite. This is a freeform argument, but may not contain spaces. It should be unique among the names of the package's other test suites, the package's executables, and the package itself. Using test suite sections requires at least Cabal version 1.9.2. The test suite may be described using the following fields, as well as build information fields (see the section on `build information`_). .. pkg-field:: type: interface (required) The interface type and version of the test suite. Cabal supports two test suite interfaces, called ``exitcode-stdio-1.0`` and ``detailed-0.9``. Each of these types may require or disallow other fields as described below. Test suites using the ``exitcode-stdio-1.0`` interface are executables that indicate test failure with a non-zero exit code when run; they may provide human-readable log information through the standard output and error channels. The ``exitcode-stdio-1.0`` type requires the ``main-is`` field. .. pkg-field:: main-is: filename :synopsis: Module containing tests main function. :required: ``exitcode-stdio-1.0`` :disallowed: ``detailed-0.9`` The name of the ``.hs`` or ``.lhs`` file containing the ``Main`` module. Note that it is the ``.hs`` filename that must be listed, even if that file is generated using a preprocessor. The source file must be relative to one of the directories listed in :pkg-field:`hs-source-dirs`. This field is analogous to the ``main-is`` field of an executable section. Test suites using the ``detailed-0.9`` interface are modules exporting the symbol ``tests :: IO [Test]``. The ``Test`` type is exported by the module ``Distribution.TestSuite`` provided by Cabal. For more details, see the example below. The ``detailed-0.9`` interface allows Cabal and other test agents to inspect a test suite's results case by case, producing detailed human- and machine-readable log files. The ``detailed-0.9`` interface requires the :pkg-field:`test-module` field. .. pkg-field:: test-module: identifier :required: ``detailed-0.9`` :disallowed: ``exitcode-stdio-1.0`` The module exporting the ``tests`` symbol. Example: Package using ``exitcode-stdio-1.0`` interface """"""""""""""""""""""""""""""""""""""""""""""""""""""" The example package description and executable source file below demonstrate the use of the ``exitcode-stdio-1.0`` interface. .. code-block:: cabal :caption: foo.cabal Name: foo Version: 1.0 License: BSD3 Cabal-Version: >= 1.9.2 Build-Type: Simple Test-Suite test-foo type: exitcode-stdio-1.0 main-is: test-foo.hs build-depends: base .. code-block:: haskell :caption: test-foo.hs module Main where import System.Exit (exitFailure) main = do putStrLn "This test always fails!" exitFailure Example: Package using ``detailed-0.9`` interface """"""""""""""""""""""""""""""""""""""""""""""""" The example package description and test module source file below demonstrate the use of the ``detailed-0.9`` interface. The test module also develops a simple implementation of the interface set by ``Distribution.TestSuite``, but in actual usage the implementation would be provided by the library that provides the testing facility. .. code-block:: cabal :caption: bar.cabal Name: bar Version: 1.0 License: BSD3 Cabal-Version: >= 1.9.2 Build-Type: Simple Test-Suite test-bar type: detailed-0.9 test-module: Bar build-depends: base, Cabal >= 1.9.2 .. code-block:: haskell :caption: Bar.hs module Bar ( tests ) where import Distribution.TestSuite tests :: IO [Test] tests = return [ Test succeeds, Test fails ] where succeeds = TestInstance { run = return $ Finished Pass , name = "succeeds" , tags = [] , options = [] , setOption = \_ _ -> Right succeeds } fails = TestInstance { run = return $ Finished $ Fail "Always fails!" , name = "fails" , tags = [] , options = [] , setOption = \_ _ -> Right fails } Running test suites """"""""""""""""""" You can have Cabal run your test suites using its built-in test runner: :: $ cabal configure --enable-tests $ cabal build $ cabal test See the output of ``cabal help test`` for a list of options you can pass to ``cabal test``. Benchmarks ^^^^^^^^^^ .. pkg-section:: benchmark name :since: 1.9.2 :synopsis: Benchmark build information. Benchmark sections (if present) describe benchmarks contained in the package and must have an argument after the section label, which defines the name of the benchmark. This is a freeform argument, but may not contain spaces. It should be unique among the names of the package's other benchmarks, the package's test suites, the package's executables, and the package itself. Using benchmark sections requires at least Cabal version 1.9.2. The benchmark may be described using the following fields, as well as build information fields (see the section on `build information`_). .. pkg-field:: type: interface (required) The interface type and version of the benchmark. At the moment Cabal only support one benchmark interface, called ``exitcode-stdio-1.0``. Benchmarks using the ``exitcode-stdio-1.0`` interface are executables that indicate failure to run the benchmark with a non-zero exit code when run; they may provide human-readable information through the standard output and error channels. .. pkg-field:: main-is: filename :required: ``exitcode-stdio-1.0`` The name of the ``.hs`` or ``.lhs`` file containing the ``Main`` module. Note that it is the ``.hs`` filename that must be listed, even if that file is generated using a preprocessor. The source file must be relative to one of the directories listed in :pkg-field:`hs-source-dirs`. This field is analogous to the ``main-is`` field of an executable section. Example: Package using ``exitcode-stdio-1.0`` interface """"""""""""""""""""""""""""""""""""""""""""""""""""""" The example package description and executable source file below demonstrate the use of the ``exitcode-stdio-1.0`` interface. .. code-block:: cabal :caption: foo.cabal :name: foo-bench.cabal Name: foo Version: 1.0 License: BSD3 Cabal-Version: >= 1.9.2 Build-Type: Simple Benchmark bench-foo type: exitcode-stdio-1.0 main-is: bench-foo.hs build-depends: base, time .. code-block:: haskell :caption: bench-foo.hs {-# LANGUAGE BangPatterns #-} module Main where import Data.Time.Clock fib 0 = 1 fib 1 = 1 fib n = fib (n-1) + fib (n-2) main = do start <- getCurrentTime let !r = fib 20 end <- getCurrentTime putStrLn $ "fib 20 took " ++ show (diffUTCTime end start) Running benchmarks """""""""""""""""" You can have Cabal run your benchmark using its built-in benchmark runner: :: $ cabal configure --enable-benchmarks $ cabal build $ cabal bench See the output of ``cabal help bench`` for a list of options you can pass to ``cabal bench``. Foreign libraries ^^^^^^^^^^^^^^^^^ Foreign libraries are system libraries intended to be linked against programs written in C or other "foreign" languages. They come in two primary flavours: dynamic libraries (``.so`` files on Linux, ``.dylib`` files on OSX, ``.dll`` files on Windows, etc.) are linked against executables when the executable is run (or even lazily during execution), while static libraries (``.a`` files on Linux/OSX, ``.lib`` files on Windows) get linked against the executable at compile time. Foreign libraries only work with GHC 7.8 and later. A typical stanza for a foreign library looks like :: foreign-library myforeignlib type: native-shared lib-version-info: 6:3:2 if os(Windows) options: standalone mod-def-file: MyForeignLib.def other-modules: MyForeignLib.SomeModule MyForeignLib.SomeOtherModule build-depends: base >=4.7 && <4.9 hs-source-dirs: src c-sources: csrc/MyForeignLibWrapper.c default-language: Haskell2010 .. pkg-field:: type: foreign library type Cabal recognizes ``native-static`` and ``native-shared`` here, although we currently only support building `native-shared` libraries. .. pkg-field:: options: foreign library option list Options for building the foreign library, typically specific to the specified type of foreign library. Currently we only support ``standalone`` here. A standalone dynamic library is one that does not have any dependencies on other (Haskell) shared libraries; without the ``standalone`` option the generated library would have dependencies on the Haskell runtime library (``libHSrts``), the base library (``libHSbase``), etc. Currently, ``standalone`` *must* be used on Windows and *must not* be used on any other platform. .. pkg-field:: mod-def-file: filename This option can only be used when creating dynamic Windows libraries (that is, when using ``native-shared`` and the ``os`` is ``Windows``). If used, it must be a path to a _module definition file_. The details of module definition files are beyond the scope of this document; see the `GHC `_ manual for some details and some further pointers. .. pkg-field:: lib-version-info: current:revision:age This field is currently only used on Linux. This field specifies a Libtool-style version-info field that sets an appropriate ABI version for the foreign library. Note that the three numbers specified in this field do not directly specify the actual ABI version: ``6:3:2`` results in library version ``4.2.3``. With this field set, the SONAME of the library is set, and symlinks are installed. How you should bump this field on an ABI change depends on the breakage you introduce: - Programs using the previous version may use the new version as drop-in replacement, and programs using the new version can also work with the previous one. In other words, no recompiling nor relinking is needed. In this case, bump ``revision`` only, don't touch current nor age. - Programs using the previous version may use the new version as drop-in replacement, but programs using the new version may use APIs not present in the previous one. In other words, a program linking against the new version may fail with "unresolved symbols" if linking against the old version at runtime: set revision to 0, bump current and age. - Programs may need to be changed, recompiled, and relinked in order to use the new version. Bump current, set revision and age to 0. Also refer to the Libtool documentation on the version-info field. .. pkg-field:: lib-version-linux: version This field is only used on Linux. Specifies the library ABI version directly for foreign libraries built on Linux: so specifying ``4.2.3`` causes a library ``libfoo.so.4.2.3`` to be built with SONAME ``libfoo.so.4``, and appropriate symlinks ``libfoo.so.4`` and ``libfoo.so`` to be installed. Note that typically foreign libraries should export a way to initialize and shutdown the Haskell runtime. In the example above, this is done by the ``csrc/MyForeignLibWrapper.c`` file, which might look something like .. code-block:: c #include #include "HsFFI.h" HsBool myForeignLibInit(void){ int argc = 2; char *argv[] = { "+RTS", "-A32m", NULL }; char **pargv = argv; // Initialize Haskell runtime hs_init(&argc, &pargv); // do any other initialization here and // return false if there was a problem return HS_BOOL_TRUE; } void myForeignLibExit(void){ hs_exit(); } With modern ghc regular libraries are installed in directories that contain package keys. This isn't usually a problem because the package gets registered in ghc's package DB and so we can figure out what the location of the library is. Foreign libraries however don't get registered, which means that we'd have to have a way of finding out where a platform library got installed (other than by searching the ``lib/`` directory). Instead, we install foreign libraries in ``~/.cabal/lib``, much like we install executables in ``~/.cabal/bin``. Build information ^^^^^^^^^^^^^^^^^ .. pkg-section:: None The following fields may be optionally present in a library, executable, test suite or benchmark section, and give information for the building of the corresponding library or executable. See also the sections on `system-dependent parameters`_ and `configurations`_ for a way to supply system-dependent values for these fields. .. pkg-field:: build-depends: package list A list of packages needed to build this one. Each package can be annotated with a version constraint. Version constraints use the operators ``==, >=, >, <, <=`` and a version number. Multiple constraints can be combined using ``&&`` or ``||``. If no version constraint is specified, any version is assumed to be acceptable. For example: :: library build-depends: base >= 2, foo >= 1.2.3 && < 1.3, bar Dependencies like ``foo >= 1.2.3 && < 1.3`` turn out to be very common because it is recommended practise for package versions to correspond to API versions (see PVP_). Since Cabal 1.6, there is a special wildcard syntax to help with such ranges :: build-depends: foo ==1.2.* It is only syntactic sugar. It is exactly equivalent to ``foo >= 1.2 && < 1.3``. Starting with Cabal 2.0, there's a new syntactic sugar to support PVP_-style major upper bounds conveniently, and is inspired by similiar syntactic sugar found in other language ecosystems where it's often called the "Caret" operator: :: build-depends: foo ^>= 1.2.3.4, bar ^>= 1 The declaration above is exactly equivalent to :: build-depends: foo >= 1.2.3.4 && < 1.3, bar >= 1 && < 1.1 .. Note:: Prior to Cabal 1.8, ``build-depends`` specified in each section were global to all sections. This was unintentional, but some packages were written to depend on it, so if you need your :pkg-field:`build-depends` to be local to each section, you must specify at least ``Cabal-Version: >= 1.8`` in your ``.cabal`` file. .. Note:: Cabal 1.20 experimentally supported module thinning and renaming in ``build-depends``; however, this support has since been removed and should not be used. .. pkg-field:: other-modules: identifier list A list of modules used by the component but not exposed to users. For a library component, these would be hidden modules of the library. For an executable, these would be auxiliary modules to be linked with the file named in the ``main-is`` field. .. Note:: Every module in the package *must* be listed in one of :pkg-field:`other-modules`, :pkg-field:`library:exposed-modules` or :pkg-field:`executable:main-is` fields. .. pkg-field:: hs-source-dirs: directory list :default: ``.`` Root directories for the module hierarchy. For backwards compatibility, the old variant ``hs-source-dir`` is also recognized. .. pkg-field:: default-extensions: identifier list A list of Haskell extensions used by every module. These determine corresponding compiler options enabled for all files. Extension names are the constructors of the `Extension <../release/cabal-latest/doc/API/Cabal/Language-Haskell-Extension.html#t:Extension>`__ type. For example, ``CPP`` specifies that Haskell source files are to be preprocessed with a C preprocessor. .. pkg-field:: other-extensions: identifier list A list of Haskell extensions used by some (but not necessarily all) modules. From GHC version 6.6 onward, these may be specified by placing a ``LANGUAGE`` pragma in the source files affected e.g. .. code-block:: haskell {-# LANGUAGE CPP, MultiParamTypeClasses #-} In Cabal-1.24 the dependency solver will use this and :pkg-field:`default-extensions` information. Cabal prior to 1.24 will abort compilation if the current compiler doesn't provide the extensions. If you use some extensions conditionally, using CPP or conditional module lists, it is good to replicate the condition in :pkg-field:`other-extensions` declarations: :: other-extensions: CPP if impl(ghc >= 7.5) other-extensions: PolyKinds You could also omit the conditionally used extensions, as they are for information only, but it is recommended to replicate them in :pkg-field:`other-extensions` declarations. .. pkg-field:: extensions: identifier list :deprecated: Deprecated in favor of :pkg-field:`default-extensions`. .. pkg-field:: build-tool-depends: package:executable list A list of Haskell programs needed to build this component. Each is specified by the package containing the executable and the name of the executable itself, separated by a colon, and optionally followed by a version bound. It is fine for the package to be the current one, in which case this is termed an *internal*, rather than *external* executable dependency. External dependencies can (and should) contain a version bound like conventional :pkg-field:`build-depends` dependencies. Internal deps should not contain a version bound, as they will be always resolved within the same configuration of the package in the build plan. Specifically, version bounds that include the package's version will be warned for being extraneous, and version bounds that exclude the package's version will raise and error for being impossible to follow. Cabal can make sure that specified programs are built and on the ``PATH`` before building the component in question. It will always do so for internal dependencies, and also do so for external dependencies when using Nix-style local builds. :pkg-field:`build-tool-depends` was added in Cabal 2.0, and it will be ignored (with a warning) with old versions of Cabal. See :pkg-field:`build-tools` for more information about backwards compatibility. .. pkg-field:: build-tools: program list :deprecated: Deprecated in favor of :pkg-field:`build-tool-depends`, but `see below for backwards compatibility information. `_ A list of Haskell programs needed to build this component. Each may be followed by an optional version bound. Confusingly, each program in the list either refer to one of three things: 1. Another executables in the same package 2. One of a hard-coded set of packages containing common build tools (possibly extended by a ``Custom`` setup script) 3. A pre-built executable that should already be on the ``PATH`` (Supported only by Cabal 2.0 and later.) These cases are listed in order of priority: an executable in the package will override any of the hard-coded packages with the same name, and a hard-coded package will override any executable on the ``PATH``. In the first two cases, the list entry is desugared into a :pkg-field:`build-tool-depends` entry. In the first case, the entry is desugared into a :pkg-field:`build-tool-depends` entry by prefixing with ``$pkg:``. In the second case, it is desugared by looking up the package and executable name in a hard-coded table. In either case, the optional version bound is passed through unchanged. Refer to the documentation for :pkg-field:`build-tool-depends` to understand the desugared field's meaning, along with restrictions on version bounds. .. _buildtoolsbc: Although this field is deprecated in favor of :pkg-field:`build-tool-depends`, there are some situations where you may prefer to use :pkg-field:`build-tool` in cases (1) and (2), as it is supported by more versions of Cabal. In case (3), :pkg-field:`build-tool-depends` is better for backwards-compatibility, as it will be ignored by old versions of Cabal; if you add the executable to :pkg-field:`build-tools`, a setup script built against old Cabal will choke. If an old version of Cabal is used, an end-user will have to manually arrange for the requested executable to be in your ``PATH``. .. pkg-field:: buildable: boolean :default: ``True`` Is the component buildable? Like some of the other fields below, this field is more useful with the slightly more elaborate form of the simple build infrastructure described in the section on `system-dependent parameters`_. .. pkg-field:: ghc-options: token list Additional options for GHC. You can often achieve the same effect using the :pkg-field:`extensions` field, which is preferred. Options required only by one module may be specified by placing an ``OPTIONS_GHC`` pragma in the source file affected. As with many other fields, whitespace can be escaped by using Haskell string syntax. Example: ``ghc-options: -Wcompat "-with-rtsopts=-T -I1" -Wall``. .. pkg-field:: ghc-prof-options: token list Additional options for GHC when the package is built with profiling enabled. Note that as of Cabal-1.24, the default profiling detail level defaults to ``exported-functions`` for libraries and ``toplevel-functions`` for executables. For GHC these correspond to the flags ``-fprof-auto-exported`` and ``-fprof-auto-top``. Prior to Cabal-1.24 the level defaulted to ``none``. These levels can be adjusted by the person building the package with the ``--profiling-detail`` and ``--library-profiling-detail`` flags. It is typically better for the person building the package to pick the profiling detail level rather than for the package author. So unless you have special needs it is probably better not to specify any of the GHC ``-fprof-auto*`` flags here. However if you wish to override the profiling detail level, you can do so using the :pkg-field:`ghc-prof-options` field: use ``-fno-prof-auto`` or one of the other ``-fprof-auto*`` flags. .. pkg-field:: ghc-shared-options: token list Additional options for GHC when the package is built as shared library. The options specified via this field are combined with the ones specified via :pkg-field:`ghc-options`, and are passed to GHC during both the compile and link phases. .. pkg-field:: includes: filename list A list of header files to be included in any compilations via C. This field applies to both header files that are already installed on the system and to those coming with the package to be installed. The former files should be found in absolute paths, while the latter files should be found in paths relative to the top of the source tree or relative to one of the directories listed in :pkg-field:`include-dirs`. These files typically contain function prototypes for foreign imports used by the package. This is in contrast to :pkg-field:`install-includes`, which lists header files that are intended to be exposed to other packages that transitively depend on this library. .. pkg-field:: install-includes: filename list A list of header files from this package to be installed into ``$libdir/includes`` when the package is installed. Files listed in :pkg-field:`install-includes` should be found in relative to the top of the source tree or relative to one of the directories listed in :pkg-field:`include-dirs`. :pkg-field:`install-includes` is typically used to name header files that contain prototypes for foreign imports used in Haskell code in this package, for which the C implementations are also provided with the package. For example, here is a ``.cabal`` file for a hypothetical ``bindings-clib`` package that bundles the C source code for ``clib``:: include-dirs: cbits c-sources: clib.c install-includes: clib.h Now any package that depends (directly or transitively) on the ``bindings-clib`` library can use ``clib.h``. Note that in order for files listed in :pkg-field:`install-includes` to be usable when compiling the package itself, they need to be listed in the :pkg-field:`includes` field as well. .. pkg-field:: include-dirs: directory list A list of directories to search for header files, when preprocessing with ``c2hs``, ``hsc2hs``, ``cpphs`` or the C preprocessor, and also when compiling via C. Directories can be absolute paths (e.g., for system directories) or paths that are relative to the top of the source tree. Cabal looks in these directories when attempting to locate files listed in :pkg-field:`includes` and :pkg-field:`install-includes`. .. pkg-field:: c-sources: filename list A list of C source files to be compiled and linked with the Haskell files. .. pkg-field:: js-sources: filename list A list of JavaScript source files to be linked with the Haskell files (only for JavaScript targets). .. pkg-field:: extra-libraries: token list A list of extra libraries to link with. .. pkg-field:: extra-ghci-libraries: token list A list of extra libraries to be used instead of 'extra-libraries' when the package is loaded with GHCi. .. pkg-field:: extra-lib-dirs: directory list A list of directories to search for libraries. .. pkg-field:: cc-options: token list Command-line arguments to be passed to the C compiler. Since the arguments are compiler-dependent, this field is more useful with the setup described in the section on `system-dependent parameters`_. .. pkg-field:: cpp-options: token list Command-line arguments for pre-processing Haskell code. Applies to haskell source and other pre-processed Haskell source like .hsc .chs. Does not apply to C code, that's what cc-options is for. .. pkg-field:: ld-options: token list Command-line arguments to be passed to the linker. Since the arguments are compiler-dependent, this field is more useful with the setup described in the section on `system-dependent parameters`_. .. pkg-field:: pkgconfig-depends: package list A list of `pkg-config `__ packages, needed to build this package. They can be annotated with versions, e.g. ``gtk+-2.0 >= 2.10, cairo >= 1.0``. If no version constraint is specified, any version is assumed to be acceptable. Cabal uses ``pkg-config`` to find if the packages are available on the system and to find the extra compilation and linker options needed to use the packages. If you need to bind to a C library that supports ``pkg-config`` (use ``pkg-config --list-all`` to find out if it is supported) then it is much preferable to use this field rather than hard code options into the other fields. .. pkg-field:: frameworks: token list On Darwin/MacOS X, a list of frameworks to link to. See Apple's developer documentation for more details on frameworks. This entry is ignored on all other platforms. .. pkg-field:: extra-frameworks-dirs: directory list On Darwin/MacOS X, a list of directories to search for frameworks. This entry is ignored on all other platforms. Configurations ^^^^^^^^^^^^^^ Library and executable sections may include conditional blocks, which test for various system parameters and configuration flags. The flags mechanism is rather generic, but most of the time a flag represents certain feature, that can be switched on or off by the package user. Here is an example package description file using configurations: Example: A package containing a library and executable programs """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" :: Name: Test1 Version: 0.0.1 Cabal-Version: >= 1.2 License: BSD3 Author: Jane Doe Synopsis: Test package to test configurations Category: Example Flag Debug Description: Enable debug support Default: False Flag WebFrontend Description: Include API for web frontend. -- Cabal checks if the configuration is possible, first -- with this flag set to True and if not it tries with False Library Build-Depends: base Exposed-Modules: Testing.Test1 Extensions: CPP if flag(debug) GHC-Options: -DDEBUG if !os(windows) CC-Options: "-DDEBUG" else CC-Options: "-DNDEBUG" if flag(webfrontend) Build-Depends: cgi > 0.42 Other-Modules: Testing.WebStuff Executable test1 Main-is: T1.hs Other-Modules: Testing.Test1 Build-Depends: base if flag(debug) CC-Options: "-DDEBUG" GHC-Options: -DDEBUG Layout """""" Flags, conditionals, library and executable sections use layout to indicate structure. This is very similar to the Haskell layout rule. Entries in a section have to all be indented to the same level which must be more than the section header. Tabs are not allowed to be used for indentation. As an alternative to using layout you can also use explicit braces ``{}``. In this case the indentation of entries in a section does not matter, though different fields within a block must be on different lines. Here is a bit of the above example again, using braces: Example: Using explicit braces rather than indentation for layout """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" :: Name: Test1 Version: 0.0.1 Cabal-Version: >= 1.2 License: BSD3 Author: Jane Doe Synopsis: Test package to test configurations Category: Example Flag Debug { Description: Enable debug support Default: False } Library { Build-Depends: base Exposed-Modules: Testing.Test1 Extensions: CPP if flag(debug) { GHC-Options: -DDEBUG if !os(windows) { CC-Options: "-DDEBUG" } else { CC-Options: "-DNDEBUG" } } } Configuration Flags """"""""""""""""""" .. pkg-section:: flag name :synopsis: Flag declaration. Flag section declares a flag which can be used in `conditional blocks`_. A flag section may contain the following fields: .. pkg-field:: description: freeform The description of this flag. .. pkg-field:: default: boolean :default: ``True`` The default value of this flag. .. note:: This value may be `overridden in several ways `__. The rationale for having flags default to True is that users usually want new features as soon as they are available. Flags representing features that are not (yet) recommended for most users (such as experimental features or debugging support) should therefore explicitly override the default to False. .. pkg-field:: manual: boolean :default: ``False`` By default, Cabal will first try to satisfy dependencies with the default flag value and then, if that is not possible, with the negated value. However, if the flag is manual, then the default value (which can be overridden by commandline flags) will be used. Conditional Blocks ^^^^^^^^^^^^^^^^^^ Conditional blocks may appear anywhere inside a library or executable section. They have to follow rather strict formatting rules. Conditional blocks must always be of the shape :: if condition property-descriptions-or-conditionals or :: if condition property-descriptions-or-conditionals else property-descriptions-or-conditionals Note that the ``if`` and the condition have to be all on the same line. Conditions """""""""" Conditions can be formed using boolean tests and the boolean operators ``||`` (disjunction / logical "or"), ``&&`` (conjunction / logical "and"), or ``!`` (negation / logical "not"). The unary ``!`` takes highest precedence, ``||`` takes lowest. Precedence levels may be overridden through the use of parentheses. For example, ``os(darwin) && !arch(i386) || os(freebsd)`` is equivalent to ``(os(darwin) && !(arch(i386))) || os(freebsd)``. The following tests are currently supported. :samp:`os({name})` Tests if the current operating system is *name*. The argument is tested against ``System.Info.os`` on the target system. There is unfortunately some disagreement between Haskell implementations about the standard values of ``System.Info.os``. Cabal canonicalises it so that in particular ``os(windows)`` works on all implementations. If the canonicalised os names match, this test evaluates to true, otherwise false. The match is case-insensitive. :samp:`arch({name})` Tests if the current architecture is *name*. The argument is matched against ``System.Info.arch`` on the target system. If the arch names match, this test evaluates to true, otherwise false. The match is case-insensitive. :samp:`impl({compiler})` Tests for the configured Haskell implementation. An optional version constraint may be specified (for example ``impl(ghc >= 6.6.1)``). If the configured implementation is of the right type and matches the version constraint, then this evaluates to true, otherwise false. The match is case-insensitive. Note that including a version constraint in an ``impl`` test causes it to check for two properties: - The current compiler has the specified name, and - The compiler's version satisfied the specified version constraint As a result, ``!impl(ghc >= x.y.z)`` is not entirely equivalent to ``impl(ghc < x.y.z)``. The test ``!impl(ghc >= x.y.z)`` checks that: - The current compiler is not GHC, or - The version of GHC is earlier than version x.y.z. :samp:`flag({name})` Evaluates to the current assignment of the flag of the given name. Flag names are case insensitive. Testing for flags that have not been introduced with a flag section is an error. ``true`` Constant value true. ``false`` Constant value false. Resolution of Conditions and Flags """""""""""""""""""""""""""""""""" If a package descriptions specifies configuration flags the package user can `control these in several ways `__. If the user does not fix the value of a flag, Cabal will try to find a flag assignment in the following way. - For each flag specified, it will assign its default value, evaluate all conditions with this flag assignment, and check if all dependencies can be satisfied. If this check succeeded, the package will be configured with those flag assignments. - If dependencies were missing, the last flag (as by the order in which the flags were introduced in the package description) is tried with its alternative value and so on. This continues until either an assignment is found where all dependencies can be satisfied, or all possible flag assignments have been tried. To put it another way, Cabal does a complete backtracking search to find a satisfiable package configuration. It is only the dependencies specified in the :pkg-field:`build-depends` field in conditional blocks that determine if a particular flag assignment is satisfiable (:pkg-field:`build-tools` are not considered). The order of the declaration and the default value of the flags determines the search order. Flags overridden on the command line fix the assignment of that flag, so no backtracking will be tried for that flag. If no suitable flag assignment could be found, the configuration phase will fail and a list of missing dependencies will be printed. Note that this resolution process is exponential in the worst case (i.e., in the case where dependencies cannot be satisfied). There are some optimizations applied internally, but the overall complexity remains unchanged. Meaning of field values when using conditionals ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ During the configuration phase, a flag assignment is chosen, all conditionals are evaluated, and the package description is combined into a flat package descriptions. If the same field both inside a conditional and outside then they are combined using the following rules. - Boolean fields are combined using conjunction (logical "and"). - List fields are combined by appending the inner items to the outer items, for example :: other-extensions: CPP if impl(ghc) other-extensions: MultiParamTypeClasses when compiled using GHC will be combined to :: other-extensions: CPP, MultiParamTypeClasses Similarly, if two conditional sections appear at the same nesting level, properties specified in the latter will come after properties specified in the former. - All other fields must not be specified in ambiguous ways. For example :: Main-is: Main.hs if flag(useothermain) Main-is: OtherMain.hs will lead to an error. Instead use :: if flag(useothermain) Main-is: OtherMain.hs else Main-is: Main.hs Source Repositories ^^^^^^^^^^^^^^^^^^^ .. pkg-section:: source-repository It is often useful to be able to specify a source revision control repository for a package. Cabal lets you specifying this information in a relatively structured form which enables other tools to interpret and make effective use of the information. For example the information should be sufficient for an automatic tool to checkout the sources. Cabal supports specifying different information for various common source control systems. Obviously not all automated tools will support all source control systems. Cabal supports specifying repositories for different use cases. By declaring which case we mean automated tools can be more useful. There are currently two kinds defined: - The ``head`` kind refers to the latest development branch of the package. This may be used for example to track activity of a project or as an indication to outside developers what sources to get for making new contributions. - The ``this`` kind refers to the branch and tag of a repository that contains the sources for this version or release of a package. For most source control systems this involves specifying a tag, id or hash of some form and perhaps a branch. The purpose is to be able to reconstruct the sources corresponding to a particular package version. This might be used to indicate what sources to get if someone needs to fix a bug in an older branch that is no longer an active head branch. You can specify one kind or the other or both. As an example here are the repositories for the Cabal library. Note that the ``this`` kind of repository specifies a tag. :: source-repository head type: darcs location: http://darcs.haskell.org/cabal/ source-repository this type: darcs location: http://darcs.haskell.org/cabal-branches/cabal-1.6/ tag: 1.6.1 The exact fields are as follows: .. pkg-field:: type: token The name of the source control system used for this repository. The currently recognised types are: - ``darcs`` - ``git`` - ``svn`` - ``cvs`` - ``mercurial`` (or alias ``hg``) - ``bazaar`` (or alias ``bzr``) - ``arch`` - ``monotone`` This field is required. .. pkg-field:: location: URL The location of the repository. The exact form of this field depends on the repository type. For example: - for darcs: ``http://code.haskell.org/foo/`` - for git: ``git://github.com/foo/bar.git`` - for CVS: ``anoncvs@cvs.foo.org:/cvs`` This field is required. .. pkg-field:: module: token CVS requires a named module, as each CVS server can host multiple named repositories. This field is required for the CVS repository type and should not be used otherwise. .. pkg-field:: branch: token Many source control systems support the notion of a branch, as a distinct concept from having repositories in separate locations. For example CVS, SVN and git use branches while for darcs uses different locations for different branches. If you need to specify a branch to identify a your repository then specify it in this field. This field is optional. .. pkg-field:: tag: token A tag identifies a particular state of a source repository. The tag can be used with a ``this`` repository kind to identify the state of a repository corresponding to a particular package version or release. The exact form of the tag depends on the repository type. This field is required for the ``this`` repository kind. .. pkg-field:: subdir: directory Some projects put the sources for multiple packages under a single source repository. This field lets you specify the relative path from the root of the repository to the top directory for the package, i.e. the directory containing the package's ``.cabal`` file. This field is optional. It default to empty which corresponds to the root directory of the repository. Downloading a package's source ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The ``cabal get`` command allows to access a package's source code - either by unpacking a tarball downloaded from Hackage (the default) or by checking out a working copy from the package's source repository. :: $ cabal get [FLAGS] PACKAGES The ``get`` command supports the following options: ``-d --destdir`` *PATH* Where to place the package source, defaults to (a subdirectory of) the current directory. ``-s --source-repository`` *[head\|this\|...]* Fork the package's source repository using the appropriate version control system. The optional argument allows to choose a specific repository kind. ``--index-state`` *[HEAD\|@\|]* Use source package index state as it existed at a previous time. Accepts unix-timestamps (e.g. ``@1474732068``), ISO8601 UTC timestamps (e.g. ``2016-09-24T17:47:48Z``), or ``HEAD`` (default). This determines which package versions are available as well as which ``.cabal`` file revision is selected (unless ``--pristine`` is used). ``--pristine`` Unpack the original pristine tarball, rather than updating the ``.cabal`` file with the latest revision from the package archive. Custom setup scripts -------------------- .. pkg-section:: custom-setup :synopsis: Custom Setup.hs build information. :since: 1.24 The optional :pkg-section:`custom-setup` stanza contains information needed for the compilation of custom ``Setup.hs`` scripts, :: custom-setup setup-depends: base >= 4.5 && < 4.11, Cabal < 1.25 .. pkg-field:: setup-depends: package list :since: 1.24 The dependencies needed to compile ``Setup.hs``. See the :pkg-field:`build-depends` field for a description of the syntax expected by this field. Autogenerated modules --------------------- Modules that are built automatically at setup, created with a custom setup script, must appear on :pkg-field:`other-modules` for the library, executable, test-suite or benchmark stanzas or also on :pkg-field:`library:exposed-modules` for libraries to be used, but are not really on the package when distributed. This makes commands like sdist fail because the file is not found. This special modules must appear again on the :pkg-field:`autogen-modules` field of the stanza that is using it, besides :pkg-field:`other-modules` or :pkg-field:`library:exposed-modules`. With this there is no need to create complex build hooks for this poweruser case. .. pkg-field:: autogen-modules: module list .. TODO: document autogen-modules field Right now :pkg-field:`executable:main-is` modules are not supported on :pkg-field:`autogen-modules`. :: Library default-language: Haskell2010 build-depends: base exposed-modules: MyLibrary MyLibHelperModule other-modules: MyLibModule autogen-modules: MyLibHelperModule Executable Exe default-language: Haskell2010 main-is: Dummy.hs build-depends: base other-modules: MyExeModule MyExeHelperModule autogen-modules: MyExeHelperModule Accessing data files from package code -------------------------------------- The placement on the target system of files listed in the :pkg-field:`data-files` field varies between systems, and in some cases one can even move packages around after installation (see `prefix independence `__). To enable packages to find these files in a portable way, Cabal generates a module called :file:`Paths_{pkgname}` (with any hyphens in *pkgname* replaced by underscores) during building, so that it may be imported by modules of the package. This module defines a function .. code-block:: haskell getDataFileName :: FilePath -> IO FilePath If the argument is a filename listed in the :pkg-field:`data-files` field, the result is the name of the corresponding file on the system on which the program is running. .. Note:: If you decide to import the :file:`Paths_{pkgname}` module then it *must* be listed in the :pkg-field:`other-modules` field just like any other module in your package and on :pkg-field:`autogen-modules` as the file is autogenerated. The :file:`Paths_{pkgname}` module is not platform independent, as any other autogenerated module, so it does not get included in the source tarballs generated by ``sdist``. The :file:`Paths_{pkgname}` module also includes some other useful functions and values, which record the version of the package and some other directories which the package has been configured to be installed into (e.g. data files live in ``getDataDir``): .. code-block:: haskell version :: Version getBinDir :: IO FilePath getLibDir :: IO FilePath getDynLibDir :: IO FilePath getDataDir :: IO FilePath getLibexecDir :: IO FilePath getSysconfDir :: IO FilePath The actual location of all these directories can be individually overridden at runtime using environment variables of the form ``pkg_name_var``, where ``pkg_name`` is the name of the package with all hyphens converted into underscores, and ``var`` is either ``bindir``, ``libdir``, ``dynlibdir``, ``datadir``, ``libexedir`` or ``sysconfdir``. For example, the configured data directory for ``pretty-show`` is controlled with the ``pretty_show_datadir`` environment variable. Accessing the package version ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The aforementioned auto generated :file:`Paths_{pkgname}` module also exports the constant ``version ::`` `Version `__ which is defined as the version of your package as specified in the ``version`` field. System-dependent parameters --------------------------- For some packages, especially those interfacing with C libraries, implementation details and the build procedure depend on the build environment. The ``build-type`` ``Configure`` can be used to handle many such situations. In this case, ``Setup.hs`` should be: .. code-block:: haskell import Distribution.Simple main = defaultMainWithHooks autoconfUserHooks Most packages, however, would probably do better using the ``Simple`` build type and `configurations`_. The :pkg-field:`build-type` ``Configure`` differs from ``Simple`` in two ways: - The package root directory must contain a shell script called ``configure``. The configure step will run the script. This ``configure`` script may be produced by `autoconf `__ or may be hand-written. The ``configure`` script typically discovers information about the system and records it for later steps, e.g. by generating system-dependent header files for inclusion in C source files and preprocessed Haskell source files. (Clearly this won't work for Windows without MSYS or Cygwin: other ideas are needed.) - If the package root directory contains a file called *package*\ ``.buildinfo`` after the configuration step, subsequent steps will read it to obtain additional settings for `build information`_ fields,to be merged with the ones given in the ``.cabal`` file. In particular, this file may be generated by the ``configure`` script mentioned above, allowing these settings to vary depending on the build environment. The build information file should have the following structure: *buildinfo* ``executable:`` *name* *buildinfo* ``executable:`` *name* *buildinfo* ... where each *buildinfo* consists of settings of fields listed in the section on `build information`_. The first one (if present) relates to the library, while each of the others relate to the named executable. (The names must match the package description, but you don't have to have entries for all of them.) Neither of these files is required. If they are absent, this setup script is equivalent to ``defaultMain``. Example: Using autoconf ^^^^^^^^^^^^^^^^^^^^^^^ This example is for people familiar with the `autoconf `__ tools. In the X11 package, the file ``configure.ac`` contains: .. code-block:: shell AC_INIT([Haskell X11 package], [1.1], [libraries@haskell.org], [X11]) # Safety check: Ensure that we are in the correct source directory. AC_CONFIG_SRCDIR([X11.cabal]) # Header file to place defines in AC_CONFIG_HEADERS([include/HsX11Config.h]) # Check for X11 include paths and libraries AC_PATH_XTRA AC_TRY_CPP([#include ],,[no_x=yes]) # Build the package if we found X11 stuff if test "$no_x" = yes then BUILD_PACKAGE_BOOL=False else BUILD_PACKAGE_BOOL=True fi AC_SUBST([BUILD_PACKAGE_BOOL]) AC_CONFIG_FILES([X11.buildinfo]) AC_OUTPUT Then the setup script will run the ``configure`` script, which checks for the presence of the X11 libraries and substitutes for variables in the file ``X11.buildinfo.in``: :: buildable: @BUILD_PACKAGE_BOOL@ cc-options: @X_CFLAGS@ ld-options: @X_LIBS@ This generates a file ``X11.buildinfo`` supplying the parameters needed by later stages: :: buildable: True cc-options: -I/usr/X11R6/include ld-options: -L/usr/X11R6/lib The ``configure`` script also generates a header file ``include/HsX11Config.h`` containing C preprocessor defines recording the results of various tests. This file may be included by C source files and preprocessed Haskell source files in the package. .. Note:: Packages using these features will also need to list additional files such as ``configure``, templates for ``.buildinfo`` files, files named only in ``.buildinfo`` files, header files and so on in the :pkg-field:`extra-source-files` field to ensure that they are included in source distributions. They should also list files and directories generated by ``configure`` in the :pkg-field:`extra-tmp-files` field to ensure that they are removed by ``setup clean``. Quite often the files generated by ``configure`` need to be listed somewhere in the package description (for example, in the :pkg-field:`install-includes` field). However, we usually don't want generated files to be included in the source tarball. The solution is again provided by the ``.buildinfo`` file. In the above example, the following line should be added to ``X11.buildinfo``: :: install-includes: HsX11Config.h In this way, the generated ``HsX11Config.h`` file won't be included in the source tarball in addition to ``HsX11Config.h.in``, but it will be copied to the right location during the install process. Packages that use custom ``Setup.hs`` scripts can update the necessary fields programmatically instead of using the ``.buildinfo`` file. Conditional compilation ----------------------- Sometimes you want to write code that works with more than one version of a dependency. You can specify a range of versions for the dependency in the :pkg-field:`build-depends`, but how do you then write the code that can use different versions of the API? Haskell lets you preprocess your code using the C preprocessor (either the real C preprocessor, or ``cpphs``). To enable this, add ``extensions: CPP`` to your package description. When using CPP, Cabal provides some pre-defined macros to let you test the version of dependent packages; for example, suppose your package works with either version 3 or version 4 of the ``base`` package, you could select the available version in your Haskell modules like this: .. code-block:: cpp #if MIN_VERSION_base(4,0,0) ... code that works with base-4 ... #else ... code that works with base-3 ... #endif In general, Cabal supplies a macro ``MIN_VERSION_``\ *``package``*\ ``_(A,B,C)`` for each package depended on via :pkg-field:`build-depends`. This macro is true if the actual version of the package in use is greater than or equal to ``A.B.C`` (using the conventional ordering on version numbers, which is lexicographic on the sequence, but numeric on each component, so for example 1.2.0 is greater than 1.0.3). Since version 1.20, the ``MIN_TOOL_VERSION_``\ *``tool``* family of macros lets you condition on the version of build tools used to build the program (e.g. ``hsc2hs``). Since version 1.24, the macro ``CURRENT_COMPONENT_ID``, which expands to the string of the component identifier that uniquely identifies this component. Furthermore, if the package is a library, the macro ``CURRENT_PACKAGE_KEY`` records the identifier that was passed to GHC for use in symbols and for type equality. Since version 2.0, the macro ``CURRENT_PACKAGE_VERSION`` expands to the string version number of the current package. Cabal places the definitions of these macros into an automatically-generated header file, which is included when preprocessing Haskell source code by passing options to the C preprocessor. Cabal also allows to detect when the source code is being used for generating documentation. The ``__HADDOCK_VERSION__`` macro is defined only when compiling via Haddock_ instead of a normal Haskell compiler. The value of the ``__HADDOCK_VERSION__`` macro is defined as ``A*1000 + B*10 + C``, where ``A.B.C`` is the Haddock version. This can be useful for working around bugs in Haddock or generating prettier documentation in some special cases. More complex packages --------------------- For packages that don't fit the simple schemes described above, you have a few options: - By using the :pkg-field:`build-type` ``Custom``, you can supply your own ``Setup.hs`` file, and customize the simple build infrastructure using *hooks*. These allow you to perform additional actions before and after each command is run, and also to specify additional preprocessors. A typical ``Setup.hs`` may look like this: .. code-block:: haskell import Distribution.Simple main = defaultMainWithHooks simpleUserHooks { postHaddock = posthaddock } posthaddock args flags desc info = .... See ``UserHooks`` in `Distribution.Simple <../release/cabal-latest/doc/API/Cabal/Distribution-Simple.html>`__ for the details, but note that this interface is experimental, and likely to change in future releases. If you use a custom ``Setup.hs`` file you should strongly consider adding a :pkg-section:`custom-setup` stanza with a :pkg-field:`custom-setup:setup-depends` field to ensure that your setup script does not break with future dependency versions. - You could delegate all the work to ``make``, though this is unlikely to be very portable. Cabal supports this with the :pkg-field:`build-type` ``Make`` and a trivial setup library `Distribution.Make <../release/cabal-latest/doc/API/Cabal/Distribution-Make.html>`__, which simply parses the command line arguments and invokes ``make``. Here ``Setup.hs`` should look like this: .. code-block:: haskell import Distribution.Make main = defaultMain The root directory of the package should contain a ``configure`` script, and, after that has run, a ``Makefile`` with a default target that builds the package, plus targets ``install``, ``register``, ``unregister``, ``clean``, ``dist`` and ``docs``. Some options to commands are passed through as follows: - The ``--with-hc-pkg``, ``--prefix``, ``--bindir``, ``--libdir``, ``--dynlibdir``, ``--datadir``, ``--libexecdir`` and ``--sysconfdir`` options to the ``configure`` command are passed on to the ``configure`` script. In addition the value of the ``--with-compiler`` option is passed in a ``--with-hc`` option and all options specified with ``--configure-option=`` are passed on. - The ``--destdir`` option to the ``copy`` command becomes a setting of a ``destdir`` variable on the invocation of ``make copy``. The supplied ``Makefile`` should provide a ``copy`` target, which will probably look like this: .. code-block:: make copy : $(MAKE) install prefix=$(destdir)/$(prefix) \ bindir=$(destdir)/$(bindir) \ libdir=$(destdir)/$(libdir) \ dynlibdir=$(destdir)/$(dynlibdir) \ datadir=$(destdir)/$(datadir) \ libexecdir=$(destdir)/$(libexecdir) \ sysconfdir=$(destdir)/$(sysconfdir) \ - Finally, with the :pkg-field:`build-type` ``Custom``, you can also write your own setup script from scratch. It must conform to the interface described in the section on `building and installing packages `__, and you may use the Cabal library for all or part of the work. One option is to copy the source of ``Distribution.Simple``, and alter it for your needs. Good luck. .. include:: references.inc