-- |
-- Module     : Simulation.Aivika.Internal.Process
-- Copyright  : Copyright (c) 2009-2014, David Sorokin <david.sorokin@gmail.com>
-- License    : BSD3
-- Maintainer : David Sorokin <david.sorokin@gmail.com>
-- Stability  : experimental
-- Tested with: GHC 7.8.3
--
-- A value in the 'Process' monad represents a discontinuous process that 
-- can suspend in any simulation time point and then resume later in the same 
-- or another time point. 
-- 
-- The process of this type can involve the 'Event', 'Dynamics' and 'Simulation'
-- computations. Moreover, a value in the @Process@ monad can be run within
-- the @Event@ computation.
--
-- A value of the 'ProcessId' type is just an identifier of such a process.
--
module Simulation.Aivika.Internal.Process
       (-- * Process Monad
        ProcessId,
        Process(..),
        ProcessLift(..),
        invokeProcess,
        -- * Running Process
        runProcess,
        runProcessUsingId,
        runProcessInStartTime,
        runProcessInStartTimeUsingId,
        runProcessInStopTime,
        runProcessInStopTimeUsingId,
        -- * Spawning Processes
        spawnProcess,
        spawnProcessUsingId,
        -- * Enqueuing Process
        enqueueProcess,
        enqueueProcessUsingId,
        -- * Creating Process Identifier
        newProcessId,
        processId,
        processUsingId,
        -- * Holding, Interrupting, Passivating and Canceling Process
        holdProcess,
        interruptProcess,
        processInterrupted,
        passivateProcess,
        processPassive,
        reactivateProcess,
        cancelProcessWithId,
        cancelProcess,
        processCancelled,
        processCancelling,
        whenCancellingProcess,
        -- * Awaiting Signal
        processAwait,
        -- * Yield of Process
        processYield,
        -- * Process Timeout
        timeoutProcess,
        timeoutProcessUsingId,
        -- * Parallelizing Processes
        processParallel,
        processParallelUsingIds,
        processParallel_,
        processParallelUsingIds_,
        -- * Exception Handling
        catchProcess,
        finallyProcess,
        throwProcess,
        -- * Utilities
        zipProcessParallel,
        zip3ProcessParallel,
        unzipProcess,
        -- * Memoizing Process
        memoProcess,
        -- * Never Ending Process
        neverProcess) where

import Data.Maybe
import Data.IORef

import Control.Exception
import Control.Monad
import Control.Monad.Trans
import Control.Applicative

import Simulation.Aivika.Internal.Specs
import Simulation.Aivika.Internal.Parameter
import Simulation.Aivika.Internal.Simulation
import Simulation.Aivika.Internal.Dynamics
import Simulation.Aivika.Internal.Event
import Simulation.Aivika.Internal.Cont
import Simulation.Aivika.Internal.Signal

-- | Represents a process identifier.
data ProcessId = 
  ProcessId { processStarted :: IORef Bool,
              processReactCont     :: IORef (Maybe (ContParams ())), 
              processCancelSource  :: ContCancellationSource,
              processInterruptRef  :: IORef Bool, 
              processInterruptCont :: IORef (Maybe (ContParams ())), 
              processInterruptVersion :: IORef Int }

-- | Specifies a discontinuous process that can suspend at any time
-- and then resume later.
newtype Process a = Process (ProcessId -> Cont a)

-- | A type class to lift the 'Process' computation to other computations.
class ProcessLift m where
  
  -- | Lift the specified 'Process' computation to another computation.
  liftProcess :: Process a -> m a

instance ProcessLift Process where
  liftProcess = id

-- | Invoke the process computation.
invokeProcess :: ProcessId -> Process a -> Cont a
{-# INLINE invokeProcess #-}
invokeProcess pid (Process m) = m pid

-- | Hold the process for the specified time period.
holdProcess :: Double -> Process ()
holdProcess dt =
  Process $ \pid ->
  Cont $ \c ->
  Event $ \p ->
  do let x = processInterruptCont pid
     writeIORef x $ Just c
     writeIORef (processInterruptRef pid) False
     v <- readIORef (processInterruptVersion pid)
     invokeEvent p $
       enqueueEvent (pointTime p + dt) $
       Event $ \p ->
       do v' <- readIORef (processInterruptVersion pid)
          when (v == v') $ 
            do writeIORef x Nothing
               invokeEvent p $ resumeCont c ()

-- | Interrupt a process with the specified identifier if the process
-- is held by computation 'holdProcess'.
interruptProcess :: ProcessId -> Event ()
interruptProcess pid =
  Event $ \p ->
  do let x = processInterruptCont pid
     a <- readIORef x
     case a of
       Nothing -> return ()
       Just c ->
         do writeIORef x Nothing
            writeIORef (processInterruptRef pid) True
            modifyIORef (processInterruptVersion pid) $ (+) 1
            invokeEvent p $ enqueueEvent (pointTime p) $ resumeCont c ()
            
-- | Test whether the process with the specified identifier was interrupted.
processInterrupted :: ProcessId -> Event Bool
processInterrupted pid =
  Event $ \p ->
  readIORef (processInterruptRef pid)

-- | Passivate the process.
passivateProcess :: Process ()
passivateProcess =
  Process $ \pid ->
  Cont $ \c ->
  Event $ \p ->
  do let x = processReactCont pid
     a <- readIORef x
     case a of
       Nothing -> writeIORef x $ Just c
       Just _  -> error "Cannot passivate the process twice: passivateProcess"

-- | Test whether the process with the specified identifier is passivated.
processPassive :: ProcessId -> Event Bool
processPassive pid =
  Event $ \p ->
  do let x = processReactCont pid
     a <- readIORef x
     return $ isJust a

-- | Reactivate a process with the specified identifier.
reactivateProcess :: ProcessId -> Event ()
reactivateProcess pid =
  Event $ \p ->
  do let x = processReactCont pid
     a <- readIORef x
     case a of
       Nothing -> 
         return ()
       Just c ->
         do writeIORef x Nothing
            invokeEvent p $ enqueueEvent (pointTime p) $ resumeCont c ()

-- | Prepare the processes identifier for running.
processIdPrepare :: ProcessId -> Event ()
processIdPrepare pid =
  Event $ \p ->
  do y <- readIORef (processStarted pid)
     if y
       then error $
            "Another process with the specified identifier " ++
            "has been started already: processIdPrepare"
       else writeIORef (processStarted pid) True
     let signal = processCancelling pid
     invokeEvent p $
       handleSignal_ signal $ \_ ->
       do interruptProcess pid
          reactivateProcess pid

-- | Run immediately the process. A new 'ProcessId' identifier will be
-- assigned to the process.
--            
-- To run the process at the specified time, you can use
-- the 'enqueueProcess' function.
runProcess :: Process () -> Event ()
runProcess p =
  do pid <- liftSimulation newProcessId
     runProcessUsingId pid p
             
-- | Run immediately the process with the specified identifier.
-- It will be more efficient than as you would specify the process identifier
-- with help of the 'processUsingId' combinator and then would call 'runProcess'.
--            
-- To run the process at the specified time, you can use
-- the 'enqueueProcessUsingId' function.
runProcessUsingId :: ProcessId -> Process () -> Event ()
runProcessUsingId pid p =
  do processIdPrepare pid
     runCont m cont econt ccont (processCancelSource pid) False
       where cont  = return
             econt = throwEvent
             ccont = return
             m = invokeProcess pid p

-- | Run the process in the start time immediately involving all pending
-- 'CurrentEvents' in the computation too.
runProcessInStartTime :: Process () -> Simulation ()
runProcessInStartTime = runEventInStartTime . runProcess

-- | Run the process in the start time immediately using the specified identifier
-- and involving all pending 'CurrentEvents' in the computation too.
runProcessInStartTimeUsingId :: ProcessId -> Process () -> Simulation ()
runProcessInStartTimeUsingId pid p =
  runEventInStartTime $ runProcessUsingId pid p

-- | Run the process in the final simulation time immediately involving all
-- pending 'CurrentEvents' in the computation too.
runProcessInStopTime :: Process () -> Simulation ()
runProcessInStopTime = runEventInStopTime . runProcess

-- | Run the process in the final simulation time immediately using 
-- the specified identifier and involving all pending 'CurrentEvents'
-- in the computation too.
runProcessInStopTimeUsingId :: ProcessId -> Process () -> Simulation ()
runProcessInStopTimeUsingId pid p =
  runEventInStopTime $ runProcessUsingId pid p

-- | Enqueue the process that will be then started at the specified time
-- from the event queue.
enqueueProcess :: Double -> Process () -> Event ()
enqueueProcess t p =
  enqueueEvent t $ runProcess p

-- | Enqueue the process that will be then started at the specified time
-- from the event queue.
enqueueProcessUsingId :: Double -> ProcessId -> Process () -> Event ()
enqueueProcessUsingId t pid p =
  enqueueEvent t $ runProcessUsingId pid p

-- | Return the current process identifier.
processId :: Process ProcessId
processId = Process return

-- | Create a new process identifier.
newProcessId :: Simulation ProcessId
newProcessId =
  do x <- liftIO $ newIORef Nothing
     y <- liftIO $ newIORef False
     c <- newContCancellationSource
     i <- liftIO $ newIORef False
     z <- liftIO $ newIORef Nothing
     v <- liftIO $ newIORef 0
     return ProcessId { processStarted = y,
                        processReactCont     = x, 
                        processCancelSource  = c, 
                        processInterruptRef  = i,
                        processInterruptCont = z, 
                        processInterruptVersion = v }

-- | Cancel a process with the specified identifier, interrupting it if needed.
cancelProcessWithId :: ProcessId -> Event ()
cancelProcessWithId pid = contCancellationInitiate (processCancelSource pid)

-- | The process cancels itself.
cancelProcess :: Process a
cancelProcess =
  do pid <- processId
     liftEvent $ cancelProcessWithId pid
     throwProcess $
       (error "The process must be cancelled already: cancelProcess." :: SomeException)

-- | Test whether the process with the specified identifier was cancelled.
processCancelled :: ProcessId -> Event Bool
processCancelled pid = contCancellationInitiated (processCancelSource pid)

-- | Return a signal that notifies about cancelling the process with 
-- the specified identifier.
processCancelling :: ProcessId -> Signal ()
processCancelling pid = contCancellationInitiating (processCancelSource pid)

-- | Register a handler that will be invoked in case of cancelling the current process.
whenCancellingProcess :: Event () -> Process ()
whenCancellingProcess h =
  Process $ \pid ->
  liftEvent $
  handleSignal_ (processCancelling pid) $ \() -> h

instance Eq ProcessId where
  x == y = processReactCont x == processReactCont y    -- for the references are unique

instance Monad Process where
  return  = returnP
  m >>= k = bindP m k

instance Functor Process where
  fmap = liftM

instance Applicative Process where
  pure = return
  (<*>) = ap

instance ParameterLift Process where
  liftParameter = liftPP

instance SimulationLift Process where
  liftSimulation = liftSP
  
instance DynamicsLift Process where
  liftDynamics = liftDP
  
instance EventLift Process where
  liftEvent = liftEP
  
instance MonadIO Process where
  liftIO = liftIOP
  
returnP :: a -> Process a
{-# INLINE returnP #-}
returnP a = Process $ \pid -> return a

bindP :: Process a -> (a -> Process b) -> Process b
{-# INLINE bindP #-}
bindP (Process m) k = 
  Process $ \pid -> 
  do a <- m pid
     let Process m' = k a
     m' pid

liftPP :: Parameter a -> Process a
{-# INLINE liftPP #-}
liftPP m = Process $ \pid -> liftParameter m

liftSP :: Simulation a -> Process a
{-# INLINE liftSP #-}
liftSP m = Process $ \pid -> liftSimulation m

liftDP :: Dynamics a -> Process a
{-# INLINE liftDP #-}
liftDP m = Process $ \pid -> liftDynamics m

liftEP :: Event a -> Process a
{-# INLINE liftEP #-}
liftEP m = Process $ \pid -> liftEvent m

liftIOP :: IO a -> Process a
{-# INLINE liftIOP #-}
liftIOP m = Process $ \pid -> liftIO m

-- | Exception handling within 'Process' computations.
catchProcess :: Exception e => Process a -> (e -> Process a) -> Process a
catchProcess (Process m) h =
  Process $ \pid ->
  catchCont (m pid) $ \e ->
  let Process m' = h e in m' pid
                           
-- | A computation with finalization part.
finallyProcess :: Process a -> Process b -> Process a
finallyProcess (Process m) (Process m') =
  Process $ \pid ->
  finallyCont (m pid) (m' pid)

-- | Throw the exception with the further exception handling.
--
-- By some reason, an exception raised with help of the standard 'throw' function
-- is not handled properly within 'Process' computation, altough it will be still handled 
-- if it will be wrapped in the 'IO' monad. Therefore, you should use specialised
-- functions like the stated one that use the 'throw' function but within the 'IO' computation,
-- which allows already handling the exception.
throwProcess :: Exception e => e -> Process a
throwProcess = liftIO . throw

-- | Execute the specified computations in parallel within
-- the current computation and return their results. The cancellation
-- of any of the nested computations affects the current computation.
-- The exception raised in any of the nested computations is propagated
-- to the current computation as well.
--
-- Here word @parallel@ literally means that the computations are
-- actually executed on a single operating system thread but
-- they are processed simultaneously by the event queue.
--
-- New 'ProcessId' identifiers will be assigned to the started processes.
processParallel :: [Process a] -> Process [a]
processParallel xs =
  liftSimulation (processParallelCreateIds xs) >>= processParallelUsingIds 

-- | Like 'processParallel' but allows specifying the process identifiers.
-- It will be more efficient than as you would specify the process identifiers
-- with help of the 'processUsingId' combinator and then would call 'processParallel'.
processParallelUsingIds :: [(ProcessId, Process a)] -> Process [a]
processParallelUsingIds xs =
  Process $ \pid ->
  do liftEvent $ processParallelPrepare xs
     contParallel $
       flip map xs $ \(pid, m) ->
       (invokeProcess pid m, processCancelSource pid)

-- | Like 'processParallel' but ignores the result.
processParallel_ :: [Process a] -> Process ()
processParallel_ xs =
  liftSimulation (processParallelCreateIds xs) >>= processParallelUsingIds_ 

-- | Like 'processParallelUsingIds' but ignores the result.
processParallelUsingIds_ :: [(ProcessId, Process a)] -> Process ()
processParallelUsingIds_ xs =
  Process $ \pid ->
  do liftEvent $ processParallelPrepare xs
     contParallel_ $
       flip map xs $ \(pid, m) ->
       (invokeProcess pid m, processCancelSource pid)

-- | Create the new process identifiers.
processParallelCreateIds :: [Process a] -> Simulation [(ProcessId, Process a)]
processParallelCreateIds xs =
  do pids <- liftSimulation $ forM xs $ const newProcessId
     return $ zip pids xs

-- | Prepare the processes for parallel execution.
processParallelPrepare :: [(ProcessId, Process a)] -> Event ()
processParallelPrepare xs =
  Event $ \p ->
  forM_ xs $ invokeEvent p . processIdPrepare . fst

-- | Allow calling the process with the specified identifier.
-- It creates a nested process when canceling any of two, or raising an
-- @IO@ exception in any of the both, affects the 'Process' computation.
--
-- At the same time, the interruption has no such effect as it requires
-- explicit specifying the 'ProcessId' identifier of the nested process itself,
-- that is the nested process cannot be interrupted using only the parent
-- process identifier.
processUsingId :: ProcessId -> Process a -> Process a
processUsingId pid x =
  Process $ \pid' ->
  do liftEvent $ processIdPrepare pid
     rerunCont (invokeProcess pid x) (processCancelSource pid)

-- | Spawn the child process specifying how the child and parent processes
-- should be cancelled in case of need.
spawnProcess :: ContCancellation -> Process () -> Process ()
spawnProcess cancellation x =
  do pid <- liftSimulation newProcessId
     spawnProcessUsingId cancellation pid x

-- | Spawn the child process specifying how the child and parent processes
-- should be cancelled in case of need.
spawnProcessUsingId :: ContCancellation -> ProcessId -> Process () -> Process ()
spawnProcessUsingId cancellation pid x =
  Process $ \pid' ->
  do liftEvent $ processIdPrepare pid
     spawnCont cancellation (invokeProcess pid x) (processCancelSource pid)

-- | Await the signal.
processAwait :: Signal a -> Process a
processAwait signal =
  Process $ \pid -> contAwait signal

-- | The result of memoization.
data MemoResult a = MemoComputed a
                  | MemoError IOException
                  | MemoCancelled

-- | Memoize the process so that it would always return the same value
-- within the simulation run.
memoProcess :: Process a -> Simulation (Process a)
memoProcess x =
  do started  <- liftIO $ newIORef False
     computed <- newSignalSource
     value    <- liftIO $ newIORef Nothing
     let result =
           do Just x <- liftIO $ readIORef value
              case x of
                MemoComputed a -> return a
                MemoError e    -> throwProcess e
                MemoCancelled  -> cancelProcess
     return $
       do v <- liftIO $ readIORef value
          case v of
            Just _ -> result
            Nothing ->
              do f <- liftIO $ readIORef started
                 case f of
                   True ->
                     do processAwait $ publishSignal computed
                        result
                   False ->
                     do liftIO $ writeIORef started True
                        r <- liftIO $ newIORef MemoCancelled
                        finallyProcess
                          (catchProcess
                           (do a <- x    -- compute only once!
                               liftIO $ writeIORef r (MemoComputed a))
                           (\e ->
                             liftIO $ writeIORef r (MemoError e)))
                          (liftEvent $
                           do liftIO $
                                do x <- readIORef r
                                   writeIORef value (Just x)
                              triggerSignal computed ())
                        result

-- | Zip two parallel processes waiting for the both.
zipProcessParallel :: Process a -> Process b -> Process (a, b)
zipProcessParallel x y =
  do [Left a, Right b] <- processParallel [fmap Left x, fmap Right y]
     return (a, b)

-- | Zip three parallel processes waiting for their results.
zip3ProcessParallel :: Process a -> Process b -> Process c -> Process (a, b, c)
zip3ProcessParallel x y z =
  do [Left a,
      Right (Left b),
      Right (Right c)] <-
       processParallel [fmap Left x,
                        fmap (Right . Left) y,
                        fmap (Right . Right) z]
     return (a, b, c)

-- | Unzip the process using memoization so that the both returned
-- processes could be applied independently, although they will refer
-- to the same pair of values.
unzipProcess :: Process (a, b) -> Simulation (Process a, Process b)
unzipProcess xy =
  do xy' <- memoProcess xy
     return (fmap fst xy', fmap snd xy')

-- | Try to run the child process within the specified timeout.
-- If the process will finish successfully within this time interval then
-- the result wrapped in 'Just' will be returned; otherwise, the child process
-- will be cancelled and 'Nothing' will be returned.
--
-- If an exception is raised in the child process then it is propagated to
-- the parent computation as well.
--
-- A cancellation of the child process doesn't lead to cancelling the parent process.
-- Then 'Nothing' is returned within the computation.
timeoutProcess :: Double -> Process a -> Process (Maybe a)
timeoutProcess timeout p =
  do pid <- liftSimulation newProcessId
     timeoutProcessUsingId timeout pid p

-- | Try to run the child process with the given identifier within the specified timeout.
-- If the process will finish successfully within this time interval then
-- the result wrapped in 'Just' will be returned; otherwise, the child process
-- will be cancelled and 'Nothing' will be returned.
--
-- If an exception is raised in the child process then it is propagated to
-- the parent computation as well.
--
-- A cancellation of the child process doesn't lead to cancelling the parent process.
-- Then 'Nothing' is returned within the computation.
timeoutProcessUsingId :: Double -> ProcessId -> Process a -> Process (Maybe a)
timeoutProcessUsingId timeout pid p =
  do s <- liftSimulation newSignalSource
     timeoutPid <- liftSimulation newProcessId
     spawnProcessUsingId CancelChildAfterParent timeoutPid $
       finallyProcess
       (holdProcess timeout)
       (liftEvent $
        cancelProcessWithId pid)
     spawnProcessUsingId CancelChildAfterParent pid $
       do r <- liftIO $ newIORef Nothing
          finallyProcess
            (catchProcess
             (do a <- p
                 liftIO $ writeIORef r $ Just (Right a))
             (\e ->
               liftIO $ writeIORef r $ Just (Left e)))
            (liftEvent $
             do x <- liftIO $ readIORef r
                triggerSignal s x)
     x <- processAwait $ publishSignal s
     case x of
       Nothing -> return Nothing
       Just (Right a) -> return (Just a)
       Just (Left (SomeException e)) -> throwProcess e

-- | Yield to allow other 'Process' and 'Event' computations to run
-- at the current simulation time point.
processYield :: Process ()
processYield =
  Process $ \pid ->
  Cont $ \c ->
  Event $ \p ->
  invokeEvent p $
  enqueueEvent (pointTime p) $
  resumeCont c ()

-- | A computation that never computes the result. It behaves like a black hole for
-- the discontinuous process, although such a process can still be canceled outside
-- (see 'cancelProcessWithId'), but then only its finalization parts (see 'finallyProcess')
-- will be called, usually, to release the resources acquired before.
neverProcess :: Process a
neverProcess =
  Process $ \pid ->
  Cont $ \c ->
  let signal = processCancelling pid
  in handleSignal_ signal $ \_ ->
     resumeCont c $ error "It must never be computed: neverProcess"