Amazonka.DirectConnect.Lens

Operations

AcceptDirectConnectGatewayAssociationProposal

acceptDirectConnectGatewayAssociationProposal_overrideAllowedPrefixesToDirectConnectGateway :: Lens' AcceptDirectConnectGatewayAssociationProposal (Maybe [RouteFilterPrefix])

Overrides the Amazon VPC prefixes advertised to the Direct Connect gateway.

For information about how to set the prefixes, see Allowed Prefixes in the Direct Connect User Guide.

acceptDirectConnectGatewayAssociationProposal_directConnectGatewayId :: Lens' AcceptDirectConnectGatewayAssociationProposal Text

The ID of the Direct Connect gateway.

acceptDirectConnectGatewayAssociationProposal_proposalId :: Lens' AcceptDirectConnectGatewayAssociationProposal Text

The ID of the request proposal.

acceptDirectConnectGatewayAssociationProposal_associatedGatewayOwnerAccount :: Lens' AcceptDirectConnectGatewayAssociationProposal Text

The ID of the Amazon Web Services account that owns the virtual private gateway or transit gateway.

acceptDirectConnectGatewayAssociationProposalResponse_directConnectGatewayAssociation :: Lens' AcceptDirectConnectGatewayAssociationProposalResponse (Maybe DirectConnectGatewayAssociation)

Undocumented member.

acceptDirectConnectGatewayAssociationProposalResponse_httpStatus :: Lens' AcceptDirectConnectGatewayAssociationProposalResponse Int

The response's http status code.

AllocateHostedConnection

allocateHostedConnection_tags :: Lens' AllocateHostedConnection (Maybe (NonEmpty Tag))

The tags associated with the connection.

allocateHostedConnection_connectionId :: Lens' AllocateHostedConnection Text

The ID of the interconnect or LAG.

allocateHostedConnection_ownerAccount :: Lens' AllocateHostedConnection Text

The ID of the Amazon Web Services account ID of the customer for the connection.

allocateHostedConnection_bandwidth :: Lens' AllocateHostedConnection Text

The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note that only those Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.

allocateHostedConnection_connectionName :: Lens' AllocateHostedConnection Text

The name of the hosted connection.

allocateHostedConnection_vlan :: Lens' AllocateHostedConnection Int

The dedicated VLAN provisioned to the hosted connection.

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

AllocatePrivateVirtualInterface

allocatePrivateVirtualInterface_connectionId :: Lens' AllocatePrivateVirtualInterface Text

The ID of the connection on which the private virtual interface is provisioned.

allocatePrivateVirtualInterface_ownerAccount :: Lens' AllocatePrivateVirtualInterface Text

The ID of the Amazon Web Services account that owns the virtual private interface.

allocatePrivateVirtualInterface_newPrivateVirtualInterfaceAllocation :: Lens' AllocatePrivateVirtualInterface NewPrivateVirtualInterfaceAllocation

Information about the private virtual interface.

virtualInterface_addressFamily :: Lens' VirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

virtualInterface_amazonAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

virtualInterface_amazonSideAsn :: Lens' VirtualInterface (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

virtualInterface_asn :: Lens' VirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

virtualInterface_authKey :: Lens' VirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

virtualInterface_awsDeviceV2 :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

virtualInterface_awsLogicalDeviceId :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

virtualInterface_bgpPeers :: Lens' VirtualInterface (Maybe [BGPPeer])

The BGP peers configured on this virtual interface.

virtualInterface_connectionId :: Lens' VirtualInterface (Maybe Text)

The ID of the connection.

virtualInterface_customerAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

virtualInterface_customerRouterConfig :: Lens' VirtualInterface (Maybe Text)

The customer router configuration.

virtualInterface_directConnectGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

virtualInterface_jumboFrameCapable :: Lens' VirtualInterface (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

virtualInterface_location :: Lens' VirtualInterface (Maybe Text)

The location of the connection.

virtualInterface_mtu :: Lens' VirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

virtualInterface_ownerAccount :: Lens' VirtualInterface (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

virtualInterface_region :: Lens' VirtualInterface (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

virtualInterface_routeFilterPrefixes :: Lens' VirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

virtualInterface_siteLinkEnabled :: Lens' VirtualInterface (Maybe Bool)

Indicates whether SiteLink is enabled.

virtualInterface_tags :: Lens' VirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the virtual interface.

virtualInterface_virtualGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

virtualInterface_virtualInterfaceId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual interface.

virtualInterface_virtualInterfaceName :: Lens' VirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

virtualInterface_virtualInterfaceState :: Lens' VirtualInterface (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

virtualInterface_virtualInterfaceType :: Lens' VirtualInterface (Maybe Text)

The type of virtual interface. The possible values are private and public.

virtualInterface_vlan :: Lens' VirtualInterface (Maybe Int)

The ID of the VLAN.

AllocatePublicVirtualInterface

allocatePublicVirtualInterface_connectionId :: Lens' AllocatePublicVirtualInterface Text

The ID of the connection on which the public virtual interface is provisioned.

allocatePublicVirtualInterface_ownerAccount :: Lens' AllocatePublicVirtualInterface Text

The ID of the Amazon Web Services account that owns the public virtual interface.

allocatePublicVirtualInterface_newPublicVirtualInterfaceAllocation :: Lens' AllocatePublicVirtualInterface NewPublicVirtualInterfaceAllocation

Information about the public virtual interface.

virtualInterface_addressFamily :: Lens' VirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

virtualInterface_amazonAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

virtualInterface_amazonSideAsn :: Lens' VirtualInterface (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

virtualInterface_asn :: Lens' VirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

virtualInterface_authKey :: Lens' VirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

virtualInterface_awsDeviceV2 :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

virtualInterface_awsLogicalDeviceId :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

virtualInterface_bgpPeers :: Lens' VirtualInterface (Maybe [BGPPeer])

The BGP peers configured on this virtual interface.

virtualInterface_connectionId :: Lens' VirtualInterface (Maybe Text)

The ID of the connection.

virtualInterface_customerAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

virtualInterface_customerRouterConfig :: Lens' VirtualInterface (Maybe Text)

The customer router configuration.

virtualInterface_directConnectGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

virtualInterface_jumboFrameCapable :: Lens' VirtualInterface (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

virtualInterface_location :: Lens' VirtualInterface (Maybe Text)

The location of the connection.

virtualInterface_mtu :: Lens' VirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

virtualInterface_ownerAccount :: Lens' VirtualInterface (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

virtualInterface_region :: Lens' VirtualInterface (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

virtualInterface_routeFilterPrefixes :: Lens' VirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

virtualInterface_siteLinkEnabled :: Lens' VirtualInterface (Maybe Bool)

Indicates whether SiteLink is enabled.

virtualInterface_tags :: Lens' VirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the virtual interface.

virtualInterface_virtualGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

virtualInterface_virtualInterfaceId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual interface.

virtualInterface_virtualInterfaceName :: Lens' VirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

virtualInterface_virtualInterfaceState :: Lens' VirtualInterface (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

virtualInterface_virtualInterfaceType :: Lens' VirtualInterface (Maybe Text)

The type of virtual interface. The possible values are private and public.

virtualInterface_vlan :: Lens' VirtualInterface (Maybe Int)

The ID of the VLAN.

AllocateTransitVirtualInterface

allocateTransitVirtualInterface_connectionId :: Lens' AllocateTransitVirtualInterface Text

The ID of the connection on which the transit virtual interface is provisioned.

allocateTransitVirtualInterface_ownerAccount :: Lens' AllocateTransitVirtualInterface Text

The ID of the Amazon Web Services account that owns the transit virtual interface.

allocateTransitVirtualInterface_newTransitVirtualInterfaceAllocation :: Lens' AllocateTransitVirtualInterface NewTransitVirtualInterfaceAllocation

Information about the transit virtual interface.

allocateTransitVirtualInterfaceResponse_virtualInterface :: Lens' AllocateTransitVirtualInterfaceResponse (Maybe VirtualInterface)

Undocumented member.

allocateTransitVirtualInterfaceResponse_httpStatus :: Lens' AllocateTransitVirtualInterfaceResponse Int

The response's http status code.

AssociateConnectionWithLag

associateConnectionWithLag_connectionId :: Lens' AssociateConnectionWithLag Text

The ID of the connection.

associateConnectionWithLag_lagId :: Lens' AssociateConnectionWithLag Text

The ID of the LAG with which to associate the connection.

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

AssociateHostedConnection

associateHostedConnection_connectionId :: Lens' AssociateHostedConnection Text

The ID of the hosted connection.

associateHostedConnection_parentConnectionId :: Lens' AssociateHostedConnection Text

The ID of the interconnect or the LAG.

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

AssociateMacSecKey

associateMacSecKey_cak :: Lens' AssociateMacSecKey (Maybe Text)

The MAC Security (MACsec) CAK to associate with the dedicated connection.

You can create the CKN/CAK pair using an industry standard tool.

The valid values are 64 hexadecimal characters (0-9, A-E).

If you use this request parameter, you must use the ckn request parameter and not use the secretARN request parameter.

associateMacSecKey_ckn :: Lens' AssociateMacSecKey (Maybe Text)

The MAC Security (MACsec) CKN to associate with the dedicated connection.

You can create the CKN/CAK pair using an industry standard tool.

The valid values are 64 hexadecimal characters (0-9, A-E).

If you use this request parameter, you must use the cak request parameter and not use the secretARN request parameter.

associateMacSecKey_secretARN :: Lens' AssociateMacSecKey (Maybe Text)

The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key to associate with the dedicated connection.

You can use DescribeConnections or DescribeLags to retrieve the MAC Security (MACsec) secret key.

If you use this request parameter, you do not use the ckn and cak request parameters.

associateMacSecKey_connectionId :: Lens' AssociateMacSecKey Text

The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).

You can use DescribeConnections or DescribeLags to retrieve connection ID.

associateMacSecKeyResponse_connectionId :: Lens' AssociateMacSecKeyResponse (Maybe Text)

The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).

associateMacSecKeyResponse_macSecKeys :: Lens' AssociateMacSecKeyResponse (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the dedicated connection.

associateMacSecKeyResponse_httpStatus :: Lens' AssociateMacSecKeyResponse Int

The response's http status code.

AssociateVirtualInterface

associateVirtualInterface_virtualInterfaceId :: Lens' AssociateVirtualInterface Text

The ID of the virtual interface.

associateVirtualInterface_connectionId :: Lens' AssociateVirtualInterface Text

The ID of the LAG or connection.

virtualInterface_addressFamily :: Lens' VirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

virtualInterface_amazonAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

virtualInterface_amazonSideAsn :: Lens' VirtualInterface (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

virtualInterface_asn :: Lens' VirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

virtualInterface_authKey :: Lens' VirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

virtualInterface_awsDeviceV2 :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

virtualInterface_awsLogicalDeviceId :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

virtualInterface_bgpPeers :: Lens' VirtualInterface (Maybe [BGPPeer])

The BGP peers configured on this virtual interface.

virtualInterface_connectionId :: Lens' VirtualInterface (Maybe Text)

The ID of the connection.

virtualInterface_customerAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

virtualInterface_customerRouterConfig :: Lens' VirtualInterface (Maybe Text)

The customer router configuration.

virtualInterface_directConnectGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

virtualInterface_jumboFrameCapable :: Lens' VirtualInterface (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

virtualInterface_location :: Lens' VirtualInterface (Maybe Text)

The location of the connection.

virtualInterface_mtu :: Lens' VirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

virtualInterface_ownerAccount :: Lens' VirtualInterface (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

virtualInterface_region :: Lens' VirtualInterface (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

virtualInterface_routeFilterPrefixes :: Lens' VirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

virtualInterface_siteLinkEnabled :: Lens' VirtualInterface (Maybe Bool)

Indicates whether SiteLink is enabled.

virtualInterface_tags :: Lens' VirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the virtual interface.

virtualInterface_virtualGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

virtualInterface_virtualInterfaceId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual interface.

virtualInterface_virtualInterfaceName :: Lens' VirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

virtualInterface_virtualInterfaceState :: Lens' VirtualInterface (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

virtualInterface_virtualInterfaceType :: Lens' VirtualInterface (Maybe Text)

The type of virtual interface. The possible values are private and public.

virtualInterface_vlan :: Lens' VirtualInterface (Maybe Int)

The ID of the VLAN.

ConfirmConnection

confirmConnection_connectionId :: Lens' ConfirmConnection Text

The ID of the hosted connection.

confirmConnectionResponse_connectionState :: Lens' ConfirmConnectionResponse (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

confirmConnectionResponse_httpStatus :: Lens' ConfirmConnectionResponse Int

The response's http status code.

ConfirmCustomerAgreement

confirmCustomerAgreement_agreementName :: Lens' ConfirmCustomerAgreement (Maybe Text)

The name of the customer agreement.

confirmCustomerAgreementResponse_status :: Lens' ConfirmCustomerAgreementResponse (Maybe Text)

The status of the customer agreement when the connection was created. This will be either signed or unsigned.

confirmCustomerAgreementResponse_httpStatus :: Lens' ConfirmCustomerAgreementResponse Int

The response's http status code.

ConfirmPrivateVirtualInterface

confirmPrivateVirtualInterface_directConnectGatewayId :: Lens' ConfirmPrivateVirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

confirmPrivateVirtualInterface_virtualGatewayId :: Lens' ConfirmPrivateVirtualInterface (Maybe Text)

The ID of the virtual private gateway.

confirmPrivateVirtualInterface_virtualInterfaceId :: Lens' ConfirmPrivateVirtualInterface Text

The ID of the virtual interface.

confirmPrivateVirtualInterfaceResponse_virtualInterfaceState :: Lens' ConfirmPrivateVirtualInterfaceResponse (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

confirmPrivateVirtualInterfaceResponse_httpStatus :: Lens' ConfirmPrivateVirtualInterfaceResponse Int

The response's http status code.

ConfirmPublicVirtualInterface

confirmPublicVirtualInterface_virtualInterfaceId :: Lens' ConfirmPublicVirtualInterface Text

The ID of the virtual interface.

confirmPublicVirtualInterfaceResponse_virtualInterfaceState :: Lens' ConfirmPublicVirtualInterfaceResponse (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

confirmPublicVirtualInterfaceResponse_httpStatus :: Lens' ConfirmPublicVirtualInterfaceResponse Int

The response's http status code.

ConfirmTransitVirtualInterface

confirmTransitVirtualInterface_virtualInterfaceId :: Lens' ConfirmTransitVirtualInterface Text

The ID of the virtual interface.

confirmTransitVirtualInterface_directConnectGatewayId :: Lens' ConfirmTransitVirtualInterface Text

The ID of the Direct Connect gateway.

confirmTransitVirtualInterfaceResponse_virtualInterfaceState :: Lens' ConfirmTransitVirtualInterfaceResponse (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

confirmTransitVirtualInterfaceResponse_httpStatus :: Lens' ConfirmTransitVirtualInterfaceResponse Int

The response's http status code.

CreateBGPPeer

createBGPPeer_newBGPPeer :: Lens' CreateBGPPeer (Maybe NewBGPPeer)

Information about the BGP peer.

createBGPPeer_virtualInterfaceId :: Lens' CreateBGPPeer (Maybe Text)

The ID of the virtual interface.

createBGPPeerResponse_virtualInterface :: Lens' CreateBGPPeerResponse (Maybe VirtualInterface)

The virtual interface.

createBGPPeerResponse_httpStatus :: Lens' CreateBGPPeerResponse Int

The response's http status code.

CreateConnection

createConnection_lagId :: Lens' CreateConnection (Maybe Text)

The ID of the LAG.

createConnection_providerName :: Lens' CreateConnection (Maybe Text)

The name of the service provider associated with the requested connection.

createConnection_requestMACSec :: Lens' CreateConnection (Maybe Bool)

Indicates whether you want the connection to support MAC Security (MACsec).

MAC Security (MACsec) is only available on dedicated connections. For information about MAC Security (MACsec) prerequisties, see MACsec prerequisties in the Direct Connect User Guide.

createConnection_tags :: Lens' CreateConnection (Maybe (NonEmpty Tag))

The tags to associate with the lag.

createConnection_location :: Lens' CreateConnection Text

The location of the connection.

createConnection_bandwidth :: Lens' CreateConnection Text

The bandwidth of the connection.

createConnection_connectionName :: Lens' CreateConnection Text

The name of the connection.

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

CreateDirectConnectGateway

createDirectConnectGateway_amazonSideAsn :: Lens' CreateDirectConnectGateway (Maybe Integer)

The autonomous system number (ASN) for Border Gateway Protocol (BGP) to be configured on the Amazon side of the connection. The ASN must be in the private range of 64,512 to 65,534 or 4,200,000,000 to 4,294,967,294. The default is 64512.

createDirectConnectGateway_directConnectGatewayName :: Lens' CreateDirectConnectGateway Text

The name of the Direct Connect gateway.

createDirectConnectGatewayResponse_directConnectGateway :: Lens' CreateDirectConnectGatewayResponse (Maybe DirectConnectGateway)

The Direct Connect gateway.

createDirectConnectGatewayResponse_httpStatus :: Lens' CreateDirectConnectGatewayResponse Int

The response's http status code.

CreateDirectConnectGatewayAssociation

createDirectConnectGatewayAssociation_addAllowedPrefixesToDirectConnectGateway :: Lens' CreateDirectConnectGatewayAssociation (Maybe [RouteFilterPrefix])

The Amazon VPC prefixes to advertise to the Direct Connect gateway

This parameter is required when you create an association to a transit gateway.

For information about how to set the prefixes, see Allowed Prefixes in the Direct Connect User Guide.

createDirectConnectGatewayAssociation_gatewayId :: Lens' CreateDirectConnectGatewayAssociation (Maybe Text)

The ID of the virtual private gateway or transit gateway.

createDirectConnectGatewayAssociation_virtualGatewayId :: Lens' CreateDirectConnectGatewayAssociation (Maybe Text)

The ID of the virtual private gateway.

createDirectConnectGatewayAssociation_directConnectGatewayId :: Lens' CreateDirectConnectGatewayAssociation Text

The ID of the Direct Connect gateway.

createDirectConnectGatewayAssociationResponse_directConnectGatewayAssociation :: Lens' CreateDirectConnectGatewayAssociationResponse (Maybe DirectConnectGatewayAssociation)

The association to be created.

createDirectConnectGatewayAssociationResponse_httpStatus :: Lens' CreateDirectConnectGatewayAssociationResponse Int

The response's http status code.

CreateDirectConnectGatewayAssociationProposal

createDirectConnectGatewayAssociationProposal_addAllowedPrefixesToDirectConnectGateway :: Lens' CreateDirectConnectGatewayAssociationProposal (Maybe [RouteFilterPrefix])

The Amazon VPC prefixes to advertise to the Direct Connect gateway.

createDirectConnectGatewayAssociationProposal_removeAllowedPrefixesToDirectConnectGateway :: Lens' CreateDirectConnectGatewayAssociationProposal (Maybe [RouteFilterPrefix])

The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.

createDirectConnectGatewayAssociationProposal_directConnectGatewayId :: Lens' CreateDirectConnectGatewayAssociationProposal Text

The ID of the Direct Connect gateway.

createDirectConnectGatewayAssociationProposal_directConnectGatewayOwnerAccount :: Lens' CreateDirectConnectGatewayAssociationProposal Text

The ID of the Amazon Web Services account that owns the Direct Connect gateway.

createDirectConnectGatewayAssociationProposal_gatewayId :: Lens' CreateDirectConnectGatewayAssociationProposal Text

The ID of the virtual private gateway or transit gateway.

createDirectConnectGatewayAssociationProposalResponse_directConnectGatewayAssociationProposal :: Lens' CreateDirectConnectGatewayAssociationProposalResponse (Maybe DirectConnectGatewayAssociationProposal)

Information about the Direct Connect gateway proposal.

createDirectConnectGatewayAssociationProposalResponse_httpStatus :: Lens' CreateDirectConnectGatewayAssociationProposalResponse Int

The response's http status code.

CreateInterconnect

createInterconnect_lagId :: Lens' CreateInterconnect (Maybe Text)

The ID of the LAG.

createInterconnect_providerName :: Lens' CreateInterconnect (Maybe Text)

The name of the service provider associated with the interconnect.

createInterconnect_tags :: Lens' CreateInterconnect (Maybe (NonEmpty Tag))

The tags to associate with the interconnect.

createInterconnect_interconnectName :: Lens' CreateInterconnect Text

The name of the interconnect.

createInterconnect_bandwidth :: Lens' CreateInterconnect Text

The port bandwidth, in Gbps. The possible values are 1 and 10.

createInterconnect_location :: Lens' CreateInterconnect Text

The location of the interconnect.

interconnect_awsDevice :: Lens' Interconnect (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

interconnect_awsDeviceV2 :: Lens' Interconnect (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

interconnect_awsLogicalDeviceId :: Lens' Interconnect (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

interconnect_bandwidth :: Lens' Interconnect (Maybe Text)

The bandwidth of the connection.

interconnect_hasLogicalRedundancy :: Lens' Interconnect (Maybe HasLogicalRedundancy)

Indicates whether the interconnect supports a secondary BGP in the same address family (IPv4/IPv6).

interconnect_interconnectId :: Lens' Interconnect (Maybe Text)

The ID of the interconnect.

interconnect_interconnectName :: Lens' Interconnect (Maybe Text)

The name of the interconnect.

interconnect_interconnectState :: Lens' Interconnect (Maybe InterconnectState)

The state of the interconnect. The following are the possible values:

• requested: The initial state of an interconnect. The interconnect stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The interconnect is approved, and is being initialized.
• available: The network link is up, and the interconnect is ready for use.
• down: The network link is down.
• deleting: The interconnect is being deleted.
• deleted: The interconnect is deleted.
• unknown: The state of the interconnect is not available.

interconnect_jumboFrameCapable :: Lens' Interconnect (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

interconnect_lagId :: Lens' Interconnect (Maybe Text)

The ID of the LAG.

interconnect_loaIssueTime :: Lens' Interconnect (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

interconnect_location :: Lens' Interconnect (Maybe Text)

The location of the connection.

interconnect_providerName :: Lens' Interconnect (Maybe Text)

The name of the service provider associated with the interconnect.

interconnect_region :: Lens' Interconnect (Maybe Text)

The Amazon Web Services Region where the connection is located.

interconnect_tags :: Lens' Interconnect (Maybe (NonEmpty Tag))

The tags associated with the interconnect.

CreateLag

createLag_childConnectionTags :: Lens' CreateLag (Maybe (NonEmpty Tag))

The tags to associate with the automtically created LAGs.

createLag_connectionId :: Lens' CreateLag (Maybe Text)

The ID of an existing dedicated connection to migrate to the LAG.

createLag_providerName :: Lens' CreateLag (Maybe Text)

The name of the service provider associated with the LAG.

createLag_requestMACSec :: Lens' CreateLag (Maybe Bool)

Indicates whether the connection will support MAC Security (MACsec).

All connections in the LAG must be capable of supporting MAC Security (MACsec). For information about MAC Security (MACsec) prerequisties, see MACsec prerequisties in the Direct Connect User Guide.

createLag_tags :: Lens' CreateLag (Maybe (NonEmpty Tag))

The tags to associate with the LAG.

createLag_numberOfConnections :: Lens' CreateLag Int

The number of physical dedicated connections initially provisioned and bundled by the LAG.

createLag_location :: Lens' CreateLag Text

The location for the LAG.

createLag_connectionsBandwidth :: Lens' CreateLag Text

The bandwidth of the individual physical dedicated connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.

createLag_lagName :: Lens' CreateLag Text

The name of the LAG.

lag_allowsHostedConnections :: Lens' Lag (Maybe Bool)

Indicates whether the LAG can host other connections.

lag_awsDevice :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsDeviceV2 :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsLogicalDeviceId :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

lag_connections :: Lens' Lag (Maybe [Connection])

The connections bundled by the LAG.

lag_connectionsBandwidth :: Lens' Lag (Maybe Text)

The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.

lag_encryptionMode :: Lens' Lag (Maybe Text)

The LAG MAC Security (MACsec) encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

lag_hasLogicalRedundancy :: Lens' Lag (Maybe HasLogicalRedundancy)

Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).

lag_jumboFrameCapable :: Lens' Lag (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

lag_lagId :: Lens' Lag (Maybe Text)

The ID of the LAG.

lag_lagName :: Lens' Lag (Maybe Text)

The name of the LAG.

lag_lagState :: Lens' Lag (Maybe LagState)

The state of the LAG. The following are the possible values:

• requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
• pending: The LAG has been approved and is being initialized.
• available: The network link is established and the LAG is ready for use.
• down: The network link is down.
• deleting: The LAG is being deleted.
• deleted: The LAG is deleted.
• unknown: The state of the LAG is not available.

lag_location :: Lens' Lag (Maybe Text)

The location of the LAG.

lag_macSecCapable :: Lens' Lag (Maybe Bool)

Indicates whether the LAG supports MAC Security (MACsec).

lag_macSecKeys :: Lens' Lag (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the LAG.

lag_minimumLinks :: Lens' Lag (Maybe Int)

The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.

lag_numberOfConnections :: Lens' Lag (Maybe Int)

The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.

lag_ownerAccount :: Lens' Lag (Maybe Text)

The ID of the Amazon Web Services account that owns the LAG.

lag_providerName :: Lens' Lag (Maybe Text)

The name of the service provider associated with the LAG.

lag_region :: Lens' Lag (Maybe Text)

The Amazon Web Services Region where the connection is located.

lag_tags :: Lens' Lag (Maybe (NonEmpty Tag))

The tags associated with the LAG.

CreatePrivateVirtualInterface

createPrivateVirtualInterface_connectionId :: Lens' CreatePrivateVirtualInterface Text

The ID of the connection.

createPrivateVirtualInterface_newPrivateVirtualInterface :: Lens' CreatePrivateVirtualInterface NewPrivateVirtualInterface

Information about the private virtual interface.

virtualInterface_addressFamily :: Lens' VirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

virtualInterface_amazonAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

virtualInterface_amazonSideAsn :: Lens' VirtualInterface (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

virtualInterface_asn :: Lens' VirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

virtualInterface_authKey :: Lens' VirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

virtualInterface_awsDeviceV2 :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

virtualInterface_awsLogicalDeviceId :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

virtualInterface_bgpPeers :: Lens' VirtualInterface (Maybe [BGPPeer])

The BGP peers configured on this virtual interface.

virtualInterface_connectionId :: Lens' VirtualInterface (Maybe Text)

The ID of the connection.

virtualInterface_customerAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

virtualInterface_customerRouterConfig :: Lens' VirtualInterface (Maybe Text)

The customer router configuration.

virtualInterface_directConnectGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

virtualInterface_jumboFrameCapable :: Lens' VirtualInterface (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

virtualInterface_location :: Lens' VirtualInterface (Maybe Text)

The location of the connection.

virtualInterface_mtu :: Lens' VirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

virtualInterface_ownerAccount :: Lens' VirtualInterface (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

virtualInterface_region :: Lens' VirtualInterface (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

virtualInterface_routeFilterPrefixes :: Lens' VirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

virtualInterface_siteLinkEnabled :: Lens' VirtualInterface (Maybe Bool)

Indicates whether SiteLink is enabled.

virtualInterface_tags :: Lens' VirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the virtual interface.

virtualInterface_virtualGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

virtualInterface_virtualInterfaceId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual interface.

virtualInterface_virtualInterfaceName :: Lens' VirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

virtualInterface_virtualInterfaceState :: Lens' VirtualInterface (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

virtualInterface_virtualInterfaceType :: Lens' VirtualInterface (Maybe Text)

The type of virtual interface. The possible values are private and public.

virtualInterface_vlan :: Lens' VirtualInterface (Maybe Int)

The ID of the VLAN.

CreatePublicVirtualInterface

createPublicVirtualInterface_connectionId :: Lens' CreatePublicVirtualInterface Text

The ID of the connection.

createPublicVirtualInterface_newPublicVirtualInterface :: Lens' CreatePublicVirtualInterface NewPublicVirtualInterface

Information about the public virtual interface.

virtualInterface_addressFamily :: Lens' VirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

virtualInterface_amazonAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

virtualInterface_amazonSideAsn :: Lens' VirtualInterface (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

virtualInterface_asn :: Lens' VirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

virtualInterface_authKey :: Lens' VirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

virtualInterface_awsDeviceV2 :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

virtualInterface_awsLogicalDeviceId :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

virtualInterface_bgpPeers :: Lens' VirtualInterface (Maybe [BGPPeer])

The BGP peers configured on this virtual interface.

virtualInterface_connectionId :: Lens' VirtualInterface (Maybe Text)

The ID of the connection.

virtualInterface_customerAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

virtualInterface_customerRouterConfig :: Lens' VirtualInterface (Maybe Text)

The customer router configuration.

virtualInterface_directConnectGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

virtualInterface_jumboFrameCapable :: Lens' VirtualInterface (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

virtualInterface_location :: Lens' VirtualInterface (Maybe Text)

The location of the connection.

virtualInterface_mtu :: Lens' VirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

virtualInterface_ownerAccount :: Lens' VirtualInterface (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

virtualInterface_region :: Lens' VirtualInterface (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

virtualInterface_routeFilterPrefixes :: Lens' VirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

virtualInterface_siteLinkEnabled :: Lens' VirtualInterface (Maybe Bool)

Indicates whether SiteLink is enabled.

virtualInterface_tags :: Lens' VirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the virtual interface.

virtualInterface_virtualGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

virtualInterface_virtualInterfaceId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual interface.

virtualInterface_virtualInterfaceName :: Lens' VirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

virtualInterface_virtualInterfaceState :: Lens' VirtualInterface (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

virtualInterface_virtualInterfaceType :: Lens' VirtualInterface (Maybe Text)

The type of virtual interface. The possible values are private and public.

virtualInterface_vlan :: Lens' VirtualInterface (Maybe Int)

The ID of the VLAN.

CreateTransitVirtualInterface

createTransitVirtualInterface_connectionId :: Lens' CreateTransitVirtualInterface Text

The ID of the connection.

createTransitVirtualInterface_newTransitVirtualInterface :: Lens' CreateTransitVirtualInterface NewTransitVirtualInterface

Information about the transit virtual interface.

createTransitVirtualInterfaceResponse_virtualInterface :: Lens' CreateTransitVirtualInterfaceResponse (Maybe VirtualInterface)

Undocumented member.

createTransitVirtualInterfaceResponse_httpStatus :: Lens' CreateTransitVirtualInterfaceResponse Int

The response's http status code.

DeleteBGPPeer

deleteBGPPeer_asn :: Lens' DeleteBGPPeer (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

deleteBGPPeer_bgpPeerId :: Lens' DeleteBGPPeer (Maybe Text)

The ID of the BGP peer.

deleteBGPPeer_customerAddress :: Lens' DeleteBGPPeer (Maybe Text)

The IP address assigned to the customer interface.

deleteBGPPeer_virtualInterfaceId :: Lens' DeleteBGPPeer (Maybe Text)

The ID of the virtual interface.

deleteBGPPeerResponse_virtualInterface :: Lens' DeleteBGPPeerResponse (Maybe VirtualInterface)

The virtual interface.

deleteBGPPeerResponse_httpStatus :: Lens' DeleteBGPPeerResponse Int

The response's http status code.

DeleteConnection

deleteConnection_connectionId :: Lens' DeleteConnection Text

The ID of the connection.

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

DeleteDirectConnectGateway

deleteDirectConnectGateway_directConnectGatewayId :: Lens' DeleteDirectConnectGateway Text

The ID of the Direct Connect gateway.

deleteDirectConnectGatewayResponse_directConnectGateway :: Lens' DeleteDirectConnectGatewayResponse (Maybe DirectConnectGateway)

The Direct Connect gateway.

deleteDirectConnectGatewayResponse_httpStatus :: Lens' DeleteDirectConnectGatewayResponse Int

The response's http status code.

DeleteDirectConnectGatewayAssociation

deleteDirectConnectGatewayAssociation_associationId :: Lens' DeleteDirectConnectGatewayAssociation (Maybe Text)

The ID of the Direct Connect gateway association.

deleteDirectConnectGatewayAssociation_directConnectGatewayId :: Lens' DeleteDirectConnectGatewayAssociation (Maybe Text)

The ID of the Direct Connect gateway.

deleteDirectConnectGatewayAssociation_virtualGatewayId :: Lens' DeleteDirectConnectGatewayAssociation (Maybe Text)

The ID of the virtual private gateway.

deleteDirectConnectGatewayAssociationResponse_directConnectGatewayAssociation :: Lens' DeleteDirectConnectGatewayAssociationResponse (Maybe DirectConnectGatewayAssociation)

Information about the deleted association.

deleteDirectConnectGatewayAssociationResponse_httpStatus :: Lens' DeleteDirectConnectGatewayAssociationResponse Int

The response's http status code.

DeleteDirectConnectGatewayAssociationProposal

deleteDirectConnectGatewayAssociationProposal_proposalId :: Lens' DeleteDirectConnectGatewayAssociationProposal Text

The ID of the proposal.

deleteDirectConnectGatewayAssociationProposalResponse_directConnectGatewayAssociationProposal :: Lens' DeleteDirectConnectGatewayAssociationProposalResponse (Maybe DirectConnectGatewayAssociationProposal)

The ID of the associated gateway.

deleteDirectConnectGatewayAssociationProposalResponse_httpStatus :: Lens' DeleteDirectConnectGatewayAssociationProposalResponse Int

The response's http status code.

DeleteInterconnect

deleteInterconnect_interconnectId :: Lens' DeleteInterconnect Text

The ID of the interconnect.

deleteInterconnectResponse_interconnectState :: Lens' DeleteInterconnectResponse (Maybe InterconnectState)

The state of the interconnect. The following are the possible values:

• requested: The initial state of an interconnect. The interconnect stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The interconnect is approved, and is being initialized.
• available: The network link is up, and the interconnect is ready for use.
• down: The network link is down.
• deleting: The interconnect is being deleted.
• deleted: The interconnect is deleted.
• unknown: The state of the interconnect is not available.

deleteInterconnectResponse_httpStatus :: Lens' DeleteInterconnectResponse Int

The response's http status code.

DeleteLag

deleteLag_lagId :: Lens' DeleteLag Text

The ID of the LAG.

lag_allowsHostedConnections :: Lens' Lag (Maybe Bool)

Indicates whether the LAG can host other connections.

lag_awsDevice :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsDeviceV2 :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsLogicalDeviceId :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

lag_connections :: Lens' Lag (Maybe [Connection])

The connections bundled by the LAG.

lag_connectionsBandwidth :: Lens' Lag (Maybe Text)

The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.

lag_encryptionMode :: Lens' Lag (Maybe Text)

The LAG MAC Security (MACsec) encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

lag_hasLogicalRedundancy :: Lens' Lag (Maybe HasLogicalRedundancy)

Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).

lag_jumboFrameCapable :: Lens' Lag (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

lag_lagId :: Lens' Lag (Maybe Text)

The ID of the LAG.

lag_lagName :: Lens' Lag (Maybe Text)

The name of the LAG.

lag_lagState :: Lens' Lag (Maybe LagState)

The state of the LAG. The following are the possible values:

• requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
• pending: The LAG has been approved and is being initialized.
• available: The network link is established and the LAG is ready for use.
• down: The network link is down.
• deleting: The LAG is being deleted.
• deleted: The LAG is deleted.
• unknown: The state of the LAG is not available.

lag_location :: Lens' Lag (Maybe Text)

The location of the LAG.

lag_macSecCapable :: Lens' Lag (Maybe Bool)

Indicates whether the LAG supports MAC Security (MACsec).

lag_macSecKeys :: Lens' Lag (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the LAG.

lag_minimumLinks :: Lens' Lag (Maybe Int)

The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.

lag_numberOfConnections :: Lens' Lag (Maybe Int)

The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.

lag_ownerAccount :: Lens' Lag (Maybe Text)

The ID of the Amazon Web Services account that owns the LAG.

lag_providerName :: Lens' Lag (Maybe Text)

The name of the service provider associated with the LAG.

lag_region :: Lens' Lag (Maybe Text)

The Amazon Web Services Region where the connection is located.

lag_tags :: Lens' Lag (Maybe (NonEmpty Tag))

The tags associated with the LAG.

DeleteVirtualInterface

deleteVirtualInterface_virtualInterfaceId :: Lens' DeleteVirtualInterface Text

The ID of the virtual interface.

deleteVirtualInterfaceResponse_virtualInterfaceState :: Lens' DeleteVirtualInterfaceResponse (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

deleteVirtualInterfaceResponse_httpStatus :: Lens' DeleteVirtualInterfaceResponse Int

The response's http status code.

DescribeConnections

describeConnections_connectionId :: Lens' DescribeConnections (Maybe Text)

The ID of the connection.

connections_connections :: Lens' Connections (Maybe [Connection])

The connections.

DescribeCustomerMetadata

describeCustomerMetadataResponse_agreements :: Lens' DescribeCustomerMetadataResponse (Maybe [CustomerAgreement])

The list of customer agreements.

describeCustomerMetadataResponse_nniPartnerType :: Lens' DescribeCustomerMetadataResponse (Maybe NniPartnerType)

The type of network-to-network interface (NNI) partner. The partner type will be one of the following:

• V1: This partner can only allocate 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps subgigabit connections.
• V2: This partner can only allocate 1GB, 2GB, 5GB, or 10GB hosted connections.
• nonPartner: The customer is not a partner.

describeCustomerMetadataResponse_httpStatus :: Lens' DescribeCustomerMetadataResponse Int

The response's http status code.

DescribeDirectConnectGatewayAssociationProposals

describeDirectConnectGatewayAssociationProposals_associatedGatewayId :: Lens' DescribeDirectConnectGatewayAssociationProposals (Maybe Text)

The ID of the associated gateway.

describeDirectConnectGatewayAssociationProposals_directConnectGatewayId :: Lens' DescribeDirectConnectGatewayAssociationProposals (Maybe Text)

The ID of the Direct Connect gateway.

describeDirectConnectGatewayAssociationProposals_maxResults :: Lens' DescribeDirectConnectGatewayAssociationProposals (Maybe Int)

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

If MaxResults is given a value larger than 100, only 100 results are returned.

describeDirectConnectGatewayAssociationProposals_nextToken :: Lens' DescribeDirectConnectGatewayAssociationProposals (Maybe Text)

The token for the next page of results.

describeDirectConnectGatewayAssociationProposals_proposalId :: Lens' DescribeDirectConnectGatewayAssociationProposals (Maybe Text)

The ID of the proposal.

describeDirectConnectGatewayAssociationProposalsResponse_directConnectGatewayAssociationProposals :: Lens' DescribeDirectConnectGatewayAssociationProposalsResponse (Maybe [DirectConnectGatewayAssociationProposal])

Describes the Direct Connect gateway association proposals.

describeDirectConnectGatewayAssociationProposalsResponse_nextToken :: Lens' DescribeDirectConnectGatewayAssociationProposalsResponse (Maybe Text)

The token to use to retrieve the next page of results. This value is null when there are no more results to return.

describeDirectConnectGatewayAssociationProposalsResponse_httpStatus :: Lens' DescribeDirectConnectGatewayAssociationProposalsResponse Int

The response's http status code.

DescribeDirectConnectGatewayAssociations

describeDirectConnectGatewayAssociations_associatedGatewayId :: Lens' DescribeDirectConnectGatewayAssociations (Maybe Text)

The ID of the associated gateway.

describeDirectConnectGatewayAssociations_associationId :: Lens' DescribeDirectConnectGatewayAssociations (Maybe Text)

The ID of the Direct Connect gateway association.

describeDirectConnectGatewayAssociations_directConnectGatewayId :: Lens' DescribeDirectConnectGatewayAssociations (Maybe Text)

The ID of the Direct Connect gateway.

describeDirectConnectGatewayAssociations_maxResults :: Lens' DescribeDirectConnectGatewayAssociations (Maybe Int)

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

If MaxResults is given a value larger than 100, only 100 results are returned.

describeDirectConnectGatewayAssociations_nextToken :: Lens' DescribeDirectConnectGatewayAssociations (Maybe Text)

The token provided in the previous call to retrieve the next page.

describeDirectConnectGatewayAssociations_virtualGatewayId :: Lens' DescribeDirectConnectGatewayAssociations (Maybe Text)

The ID of the virtual private gateway or transit gateway.

describeDirectConnectGatewayAssociationsResponse_directConnectGatewayAssociations :: Lens' DescribeDirectConnectGatewayAssociationsResponse (Maybe [DirectConnectGatewayAssociation])

Information about the associations.

describeDirectConnectGatewayAssociationsResponse_nextToken :: Lens' DescribeDirectConnectGatewayAssociationsResponse (Maybe Text)

The token to retrieve the next page.

describeDirectConnectGatewayAssociationsResponse_httpStatus :: Lens' DescribeDirectConnectGatewayAssociationsResponse Int

The response's http status code.

DescribeDirectConnectGatewayAttachments

describeDirectConnectGatewayAttachments_directConnectGatewayId :: Lens' DescribeDirectConnectGatewayAttachments (Maybe Text)

The ID of the Direct Connect gateway.

describeDirectConnectGatewayAttachments_maxResults :: Lens' DescribeDirectConnectGatewayAttachments (Maybe Int)

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

If MaxResults is given a value larger than 100, only 100 results are returned.

describeDirectConnectGatewayAttachments_nextToken :: Lens' DescribeDirectConnectGatewayAttachments (Maybe Text)

The token provided in the previous call to retrieve the next page.

describeDirectConnectGatewayAttachments_virtualInterfaceId :: Lens' DescribeDirectConnectGatewayAttachments (Maybe Text)

The ID of the virtual interface.

describeDirectConnectGatewayAttachmentsResponse_directConnectGatewayAttachments :: Lens' DescribeDirectConnectGatewayAttachmentsResponse (Maybe [DirectConnectGatewayAttachment])

The attachments.

describeDirectConnectGatewayAttachmentsResponse_nextToken :: Lens' DescribeDirectConnectGatewayAttachmentsResponse (Maybe Text)

The token to retrieve the next page.

describeDirectConnectGatewayAttachmentsResponse_httpStatus :: Lens' DescribeDirectConnectGatewayAttachmentsResponse Int

The response's http status code.

DescribeDirectConnectGateways

describeDirectConnectGateways_directConnectGatewayId :: Lens' DescribeDirectConnectGateways (Maybe Text)

The ID of the Direct Connect gateway.

describeDirectConnectGateways_maxResults :: Lens' DescribeDirectConnectGateways (Maybe Int)

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

If MaxResults is given a value larger than 100, only 100 results are returned.

describeDirectConnectGateways_nextToken :: Lens' DescribeDirectConnectGateways (Maybe Text)

The token provided in the previous call to retrieve the next page.

describeDirectConnectGatewaysResponse_directConnectGateways :: Lens' DescribeDirectConnectGatewaysResponse (Maybe [DirectConnectGateway])

The Direct Connect gateways.

describeDirectConnectGatewaysResponse_nextToken :: Lens' DescribeDirectConnectGatewaysResponse (Maybe Text)

The token to retrieve the next page.

describeDirectConnectGatewaysResponse_httpStatus :: Lens' DescribeDirectConnectGatewaysResponse Int

The response's http status code.

DescribeHostedConnections

describeHostedConnections_connectionId :: Lens' DescribeHostedConnections Text

The ID of the interconnect or LAG.

connections_connections :: Lens' Connections (Maybe [Connection])

The connections.

DescribeInterconnects

describeInterconnects_interconnectId :: Lens' DescribeInterconnects (Maybe Text)

The ID of the interconnect.

describeInterconnectsResponse_interconnects :: Lens' DescribeInterconnectsResponse (Maybe [Interconnect])

The interconnects.

describeInterconnectsResponse_httpStatus :: Lens' DescribeInterconnectsResponse Int

The response's http status code.

DescribeLags

describeLags_lagId :: Lens' DescribeLags (Maybe Text)

The ID of the LAG.

describeLagsResponse_lags :: Lens' DescribeLagsResponse (Maybe [Lag])

The LAGs.

describeLagsResponse_httpStatus :: Lens' DescribeLagsResponse Int

The response's http status code.

DescribeLoa

describeLoa_loaContentType :: Lens' DescribeLoa (Maybe LoaContentType)

The standard media type for the LOA-CFA document. The only supported value is application/pdf.

describeLoa_providerName :: Lens' DescribeLoa (Maybe Text)

The name of the service provider who establishes connectivity on your behalf. If you specify this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.

describeLoa_connectionId :: Lens' DescribeLoa Text

The ID of a connection, LAG, or interconnect.

describeLoaResponse_loaContent :: Lens' DescribeLoaResponse (Maybe ByteString)

The binary contents of the LOA-CFA document.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

describeLoaResponse_loaContentType :: Lens' DescribeLoaResponse (Maybe LoaContentType)

The standard media type for the LOA-CFA document. The only supported value is application/pdf.

describeLoaResponse_httpStatus :: Lens' DescribeLoaResponse Int

The response's http status code.

DescribeLocations

describeLocationsResponse_locations :: Lens' DescribeLocationsResponse (Maybe [Location])

The locations.

describeLocationsResponse_httpStatus :: Lens' DescribeLocationsResponse Int

The response's http status code.

DescribeRouterConfiguration

describeRouterConfiguration_routerTypeIdentifier :: Lens' DescribeRouterConfiguration (Maybe Text)

Identifies the router by a combination of vendor, platform, and software version. For example, CiscoSystemsInc-2900SeriesRouters-IOS124.

describeRouterConfiguration_virtualInterfaceId :: Lens' DescribeRouterConfiguration Text

The ID of the virtual interface.

describeRouterConfigurationResponse_customerRouterConfig :: Lens' DescribeRouterConfigurationResponse (Maybe Text)

The customer router configuration.

describeRouterConfigurationResponse_router :: Lens' DescribeRouterConfigurationResponse (Maybe RouterType)

The details about the router.

describeRouterConfigurationResponse_virtualInterfaceId :: Lens' DescribeRouterConfigurationResponse (Maybe Text)

The ID assigned to the virtual interface.

describeRouterConfigurationResponse_virtualInterfaceName :: Lens' DescribeRouterConfigurationResponse (Maybe Text)

Provides the details about a virtual interface's router.

describeRouterConfigurationResponse_httpStatus :: Lens' DescribeRouterConfigurationResponse Int

The response's http status code.

DescribeTags

describeTags_resourceArns :: Lens' DescribeTags [Text]

The Amazon Resource Names (ARNs) of the resources.

describeTagsResponse_resourceTags :: Lens' DescribeTagsResponse (Maybe [ResourceTag])

Information about the tags.

describeTagsResponse_httpStatus :: Lens' DescribeTagsResponse Int

The response's http status code.

DescribeVirtualGateways

describeVirtualGatewaysResponse_virtualGateways :: Lens' DescribeVirtualGatewaysResponse (Maybe [VirtualGateway])

The virtual private gateways.

describeVirtualGatewaysResponse_httpStatus :: Lens' DescribeVirtualGatewaysResponse Int

The response's http status code.

DescribeVirtualInterfaces

describeVirtualInterfaces_connectionId :: Lens' DescribeVirtualInterfaces (Maybe Text)

The ID of the connection.

describeVirtualInterfaces_virtualInterfaceId :: Lens' DescribeVirtualInterfaces (Maybe Text)

The ID of the virtual interface.

describeVirtualInterfacesResponse_virtualInterfaces :: Lens' DescribeVirtualInterfacesResponse (Maybe [VirtualInterface])

The virtual interfaces

describeVirtualInterfacesResponse_httpStatus :: Lens' DescribeVirtualInterfacesResponse Int

The response's http status code.

DisassociateConnectionFromLag

disassociateConnectionFromLag_connectionId :: Lens' DisassociateConnectionFromLag Text

The ID of the connection.

disassociateConnectionFromLag_lagId :: Lens' DisassociateConnectionFromLag Text

The ID of the LAG.

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

DisassociateMacSecKey

disassociateMacSecKey_connectionId :: Lens' DisassociateMacSecKey Text

The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).

You can use DescribeConnections or DescribeLags to retrieve connection ID.

disassociateMacSecKey_secretARN :: Lens' DisassociateMacSecKey Text

The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.

You can use DescribeConnections to retrieve the ARN of the MAC Security (MACsec) secret key.

disassociateMacSecKeyResponse_connectionId :: Lens' DisassociateMacSecKeyResponse (Maybe Text)

The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).

disassociateMacSecKeyResponse_macSecKeys :: Lens' DisassociateMacSecKeyResponse (Maybe [MacSecKey])

The MAC Security (MACsec) security keys no longer associated with the dedicated connection.

disassociateMacSecKeyResponse_httpStatus :: Lens' DisassociateMacSecKeyResponse Int

The response's http status code.

ListVirtualInterfaceTestHistory

listVirtualInterfaceTestHistory_bgpPeers :: Lens' ListVirtualInterfaceTestHistory (Maybe [Text])

The BGP peers that were placed in the DOWN state during the virtual interface failover test.

listVirtualInterfaceTestHistory_maxResults :: Lens' ListVirtualInterfaceTestHistory (Maybe Int)

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

If MaxResults is given a value larger than 100, only 100 results are returned.

listVirtualInterfaceTestHistory_nextToken :: Lens' ListVirtualInterfaceTestHistory (Maybe Text)

The token for the next page of results.

listVirtualInterfaceTestHistory_status :: Lens' ListVirtualInterfaceTestHistory (Maybe Text)

The status of the virtual interface failover test.

listVirtualInterfaceTestHistory_testId :: Lens' ListVirtualInterfaceTestHistory (Maybe Text)

The ID of the virtual interface failover test.

listVirtualInterfaceTestHistory_virtualInterfaceId :: Lens' ListVirtualInterfaceTestHistory (Maybe Text)

The ID of the virtual interface that was tested.

listVirtualInterfaceTestHistoryResponse_nextToken :: Lens' ListVirtualInterfaceTestHistoryResponse (Maybe Text)

The token to use to retrieve the next page of results. This value is null when there are no more results to return.

listVirtualInterfaceTestHistoryResponse_virtualInterfaceTestHistory :: Lens' ListVirtualInterfaceTestHistoryResponse (Maybe [VirtualInterfaceTestHistory])

The ID of the tested virtual interface.

listVirtualInterfaceTestHistoryResponse_httpStatus :: Lens' ListVirtualInterfaceTestHistoryResponse Int

The response's http status code.

StartBgpFailoverTest

startBgpFailoverTest_bgpPeers :: Lens' StartBgpFailoverTest (Maybe [Text])

The BGP peers to place in the DOWN state.

startBgpFailoverTest_testDurationInMinutes :: Lens' StartBgpFailoverTest (Maybe Int)

The time in minutes that the virtual interface failover test will last.

Maximum value: 180 minutes (3 hours).

Default: 180 minutes (3 hours).

startBgpFailoverTest_virtualInterfaceId :: Lens' StartBgpFailoverTest Text

The ID of the virtual interface you want to test.

startBgpFailoverTestResponse_virtualInterfaceTest :: Lens' StartBgpFailoverTestResponse (Maybe VirtualInterfaceTestHistory)

Information about the virtual interface failover test.

startBgpFailoverTestResponse_httpStatus :: Lens' StartBgpFailoverTestResponse Int

The response's http status code.

StopBgpFailoverTest

stopBgpFailoverTest_virtualInterfaceId :: Lens' StopBgpFailoverTest Text

The ID of the virtual interface you no longer want to test.

stopBgpFailoverTestResponse_virtualInterfaceTest :: Lens' StopBgpFailoverTestResponse (Maybe VirtualInterfaceTestHistory)

Information about the virtual interface failover test.

stopBgpFailoverTestResponse_httpStatus :: Lens' StopBgpFailoverTestResponse Int

The response's http status code.

TagResource

tagResource_resourceArn :: Lens' TagResource Text

The Amazon Resource Name (ARN) of the resource.

tagResource_tags :: Lens' TagResource (NonEmpty Tag)

The tags to add.

tagResourceResponse_httpStatus :: Lens' TagResourceResponse Int

The response's http status code.

UntagResource

untagResource_resourceArn :: Lens' UntagResource Text

The Amazon Resource Name (ARN) of the resource.

untagResource_tagKeys :: Lens' UntagResource [Text]

The tag keys of the tags to remove.

untagResourceResponse_httpStatus :: Lens' UntagResourceResponse Int

The response's http status code.

UpdateConnection

updateConnection_connectionName :: Lens' UpdateConnection (Maybe Text)

The name of the connection.

updateConnection_encryptionMode :: Lens' UpdateConnection (Maybe Text)

The connection MAC Security (MACsec) encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

updateConnection_connectionId :: Lens' UpdateConnection Text

The ID of the dedicated connection.

You can use DescribeConnections to retrieve the connection ID.

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

UpdateDirectConnectGateway

updateDirectConnectGateway_directConnectGatewayId :: Lens' UpdateDirectConnectGateway Text

The ID of the Direct Connect gateway to update.

updateDirectConnectGateway_newDirectConnectGatewayName :: Lens' UpdateDirectConnectGateway Text

The new name for the Direct Connect gateway.

updateDirectConnectGatewayResponse_directConnectGateway :: Lens' UpdateDirectConnectGatewayResponse (Maybe DirectConnectGateway)

Undocumented member.

updateDirectConnectGatewayResponse_httpStatus :: Lens' UpdateDirectConnectGatewayResponse Int

The response's http status code.

UpdateDirectConnectGatewayAssociation

updateDirectConnectGatewayAssociation_addAllowedPrefixesToDirectConnectGateway :: Lens' UpdateDirectConnectGatewayAssociation (Maybe [RouteFilterPrefix])

The Amazon VPC prefixes to advertise to the Direct Connect gateway.

updateDirectConnectGatewayAssociation_associationId :: Lens' UpdateDirectConnectGatewayAssociation (Maybe Text)

The ID of the Direct Connect gateway association.

updateDirectConnectGatewayAssociation_removeAllowedPrefixesToDirectConnectGateway :: Lens' UpdateDirectConnectGatewayAssociation (Maybe [RouteFilterPrefix])

The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.

updateDirectConnectGatewayAssociationResponse_directConnectGatewayAssociation :: Lens' UpdateDirectConnectGatewayAssociationResponse (Maybe DirectConnectGatewayAssociation)

Undocumented member.

updateDirectConnectGatewayAssociationResponse_httpStatus :: Lens' UpdateDirectConnectGatewayAssociationResponse Int

The response's http status code.

UpdateLag

updateLag_encryptionMode :: Lens' UpdateLag (Maybe Text)

The LAG MAC Security (MACsec) encryption mode.

Amazon Web Services applies the value to all connections which are part of the LAG.

updateLag_lagName :: Lens' UpdateLag (Maybe Text)

The name of the LAG.

updateLag_minimumLinks :: Lens' UpdateLag (Maybe Int)

The minimum number of physical connections that must be operational for the LAG itself to be operational.

updateLag_lagId :: Lens' UpdateLag Text

The ID of the LAG.

lag_allowsHostedConnections :: Lens' Lag (Maybe Bool)

Indicates whether the LAG can host other connections.

lag_awsDevice :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsDeviceV2 :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsLogicalDeviceId :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

lag_connections :: Lens' Lag (Maybe [Connection])

The connections bundled by the LAG.

lag_connectionsBandwidth :: Lens' Lag (Maybe Text)

The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.

lag_encryptionMode :: Lens' Lag (Maybe Text)

The LAG MAC Security (MACsec) encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

lag_hasLogicalRedundancy :: Lens' Lag (Maybe HasLogicalRedundancy)

Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).

lag_jumboFrameCapable :: Lens' Lag (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

lag_lagId :: Lens' Lag (Maybe Text)

The ID of the LAG.

lag_lagName :: Lens' Lag (Maybe Text)

The name of the LAG.

lag_lagState :: Lens' Lag (Maybe LagState)

The state of the LAG. The following are the possible values:

• requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
• pending: The LAG has been approved and is being initialized.
• available: The network link is established and the LAG is ready for use.
• down: The network link is down.
• deleting: The LAG is being deleted.
• deleted: The LAG is deleted.
• unknown: The state of the LAG is not available.

lag_location :: Lens' Lag (Maybe Text)

The location of the LAG.

lag_macSecCapable :: Lens' Lag (Maybe Bool)

Indicates whether the LAG supports MAC Security (MACsec).

lag_macSecKeys :: Lens' Lag (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the LAG.

lag_minimumLinks :: Lens' Lag (Maybe Int)

The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.

lag_numberOfConnections :: Lens' Lag (Maybe Int)

The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.

lag_ownerAccount :: Lens' Lag (Maybe Text)

The ID of the Amazon Web Services account that owns the LAG.

lag_providerName :: Lens' Lag (Maybe Text)

The name of the service provider associated with the LAG.

lag_region :: Lens' Lag (Maybe Text)

The Amazon Web Services Region where the connection is located.

lag_tags :: Lens' Lag (Maybe (NonEmpty Tag))

The tags associated with the LAG.

UpdateVirtualInterfaceAttributes

updateVirtualInterfaceAttributes_enableSiteLink :: Lens' UpdateVirtualInterfaceAttributes (Maybe Bool)

Indicates whether to enable or disable SiteLink.

updateVirtualInterfaceAttributes_mtu :: Lens' UpdateVirtualInterfaceAttributes (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

updateVirtualInterfaceAttributes_virtualInterfaceName :: Lens' UpdateVirtualInterfaceAttributes (Maybe Text)

The name of the virtual private interface.

updateVirtualInterfaceAttributes_virtualInterfaceId :: Lens' UpdateVirtualInterfaceAttributes Text

The ID of the virtual private interface.

virtualInterface_addressFamily :: Lens' VirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

virtualInterface_amazonAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

virtualInterface_amazonSideAsn :: Lens' VirtualInterface (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

virtualInterface_asn :: Lens' VirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

virtualInterface_authKey :: Lens' VirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

virtualInterface_awsDeviceV2 :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

virtualInterface_awsLogicalDeviceId :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

virtualInterface_bgpPeers :: Lens' VirtualInterface (Maybe [BGPPeer])

The BGP peers configured on this virtual interface.

virtualInterface_connectionId :: Lens' VirtualInterface (Maybe Text)

The ID of the connection.

virtualInterface_customerAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

virtualInterface_customerRouterConfig :: Lens' VirtualInterface (Maybe Text)

The customer router configuration.

virtualInterface_directConnectGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

virtualInterface_jumboFrameCapable :: Lens' VirtualInterface (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

virtualInterface_location :: Lens' VirtualInterface (Maybe Text)

The location of the connection.

virtualInterface_mtu :: Lens' VirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

virtualInterface_ownerAccount :: Lens' VirtualInterface (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

virtualInterface_region :: Lens' VirtualInterface (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

virtualInterface_routeFilterPrefixes :: Lens' VirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

virtualInterface_siteLinkEnabled :: Lens' VirtualInterface (Maybe Bool)

Indicates whether SiteLink is enabled.

virtualInterface_tags :: Lens' VirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the virtual interface.

virtualInterface_virtualGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

virtualInterface_virtualInterfaceId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual interface.

virtualInterface_virtualInterfaceName :: Lens' VirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

virtualInterface_virtualInterfaceState :: Lens' VirtualInterface (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

virtualInterface_virtualInterfaceType :: Lens' VirtualInterface (Maybe Text)

The type of virtual interface. The possible values are private and public.

virtualInterface_vlan :: Lens' VirtualInterface (Maybe Int)

The ID of the VLAN.

Types

AssociatedGateway

associatedGateway_id :: Lens' AssociatedGateway (Maybe Text)

The ID of the associated gateway.

associatedGateway_ownerAccount :: Lens' AssociatedGateway (Maybe Text)

The ID of the Amazon Web Services account that owns the associated virtual private gateway or transit gateway.

associatedGateway_region :: Lens' AssociatedGateway (Maybe Text)

The Region where the associated gateway is located.

associatedGateway_type :: Lens' AssociatedGateway (Maybe GatewayType)

The type of associated gateway.

BGPPeer

bGPPeer_addressFamily :: Lens' BGPPeer (Maybe AddressFamily)

The address family for the BGP peer.

bGPPeer_amazonAddress :: Lens' BGPPeer (Maybe Text)

The IP address assigned to the Amazon interface.

bGPPeer_asn :: Lens' BGPPeer (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

bGPPeer_authKey :: Lens' BGPPeer (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

bGPPeer_awsDeviceV2 :: Lens' BGPPeer (Maybe Text)

The Direct Connect endpoint that terminates the BGP peer.

bGPPeer_awsLogicalDeviceId :: Lens' BGPPeer (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

bGPPeer_bgpPeerId :: Lens' BGPPeer (Maybe Text)

The ID of the BGP peer.

bGPPeer_bgpPeerState :: Lens' BGPPeer (Maybe BGPPeerState)

The state of the BGP peer. The following are the possible values:

• verifying: The BGP peering addresses or ASN require validation before the BGP peer can be created. This state applies only to public virtual interfaces.
• pending: The BGP peer is created, and remains in this state until it is ready to be established.
• available: The BGP peer is ready to be established.
• deleting: The BGP peer is being deleted.
• deleted: The BGP peer is deleted and cannot be established.

bGPPeer_bgpStatus :: Lens' BGPPeer (Maybe BGPStatus)

The status of the BGP peer. The following are the possible values:

• up: The BGP peer is established. This state does not indicate the state of the routing function. Ensure that you are receiving routes over the BGP session.
• down: The BGP peer is down.
• unknown: The BGP peer status is not available.

bGPPeer_customerAddress :: Lens' BGPPeer (Maybe Text)

The IP address assigned to the customer interface.

Connection

connection_awsDevice :: Lens' Connection (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

connection_awsDeviceV2 :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

connection_bandwidth :: Lens' Connection (Maybe Text)

The bandwidth of the connection.

connection_connectionId :: Lens' Connection (Maybe Text)

The ID of the connection.

connection_connectionName :: Lens' Connection (Maybe Text)

The name of the connection.

connection_connectionState :: Lens' Connection (Maybe ConnectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The connection has been approved and is being initialized.
• available: The network link is up and the connection is ready for use.
• down: The network link is down.
• deleting: The connection is being deleted.
• deleted: The connection has been deleted.
• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
• unknown: The state of the connection is not available.

connection_encryptionMode :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

connection_lagId :: Lens' Connection (Maybe Text)

The ID of the LAG.

connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

connection_location :: Lens' Connection (Maybe Text)

The location of the connection.

connection_macSecCapable :: Lens' Connection (Maybe Bool)

Indicates whether the connection supports MAC Security (MACsec).

connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the connection.

connection_ownerAccount :: Lens' Connection (Maybe Text)

The ID of the Amazon Web Services account that owns the connection.

connection_partnerName :: Lens' Connection (Maybe Text)

The name of the Direct Connect service provider associated with the connection.

connection_portEncryptionStatus :: Lens' Connection (Maybe Text)

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

connection_providerName :: Lens' Connection (Maybe Text)

The name of the service provider associated with the connection.

connection_region :: Lens' Connection (Maybe Text)

The Amazon Web Services Region where the connection is located.

connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))

The tags associated with the connection.

connection_vlan :: Lens' Connection (Maybe Int)

The ID of the VLAN.

Connections

connections_connections :: Lens' Connections (Maybe [Connection])

The connections.

CustomerAgreement

customerAgreement_agreementName :: Lens' CustomerAgreement (Maybe Text)

The name of the agreement.

customerAgreement_status :: Lens' CustomerAgreement (Maybe Text)

The status of the customer agreement. This will be either signed or unsigned

DirectConnectGateway

directConnectGateway_amazonSideAsn :: Lens' DirectConnectGateway (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

directConnectGateway_directConnectGatewayId :: Lens' DirectConnectGateway (Maybe Text)

The ID of the Direct Connect gateway.

directConnectGateway_directConnectGatewayName :: Lens' DirectConnectGateway (Maybe Text)

The name of the Direct Connect gateway.

directConnectGateway_directConnectGatewayState :: Lens' DirectConnectGateway (Maybe DirectConnectGatewayState)

The state of the Direct Connect gateway. The following are the possible values:

• pending: The initial state after calling CreateDirectConnectGateway.
• available: The Direct Connect gateway is ready for use.
• deleting: The initial state after calling DeleteDirectConnectGateway.
• deleted: The Direct Connect gateway is deleted and cannot pass traffic.

directConnectGateway_ownerAccount :: Lens' DirectConnectGateway (Maybe Text)

The ID of the Amazon Web Services account that owns the Direct Connect gateway.

directConnectGateway_stateChangeError :: Lens' DirectConnectGateway (Maybe Text)

The error message if the state of an object failed to advance.

DirectConnectGatewayAssociation

directConnectGatewayAssociation_allowedPrefixesToDirectConnectGateway :: Lens' DirectConnectGatewayAssociation (Maybe [RouteFilterPrefix])

The Amazon VPC prefixes to advertise to the Direct Connect gateway.

directConnectGatewayAssociation_associatedGateway :: Lens' DirectConnectGatewayAssociation (Maybe AssociatedGateway)

Information about the associated gateway.

directConnectGatewayAssociation_associationId :: Lens' DirectConnectGatewayAssociation (Maybe Text)

The ID of the Direct Connect gateway association.

directConnectGatewayAssociation_associationState :: Lens' DirectConnectGatewayAssociation (Maybe DirectConnectGatewayAssociationState)

The state of the association. The following are the possible values:

• associating: The initial state after calling CreateDirectConnectGatewayAssociation.
• associated: The Direct Connect gateway and virtual private gateway or transit gateway are successfully associated and ready to pass traffic.
• disassociating: The initial state after calling DeleteDirectConnectGatewayAssociation.
• disassociated: The virtual private gateway or transit gateway is disassociated from the Direct Connect gateway. Traffic flow between the Direct Connect gateway and virtual private gateway or transit gateway is stopped.

directConnectGatewayAssociation_directConnectGatewayId :: Lens' DirectConnectGatewayAssociation (Maybe Text)

The ID of the Direct Connect gateway.

directConnectGatewayAssociation_directConnectGatewayOwnerAccount :: Lens' DirectConnectGatewayAssociation (Maybe Text)

The ID of the Amazon Web Services account that owns the associated gateway.

directConnectGatewayAssociation_stateChangeError :: Lens' DirectConnectGatewayAssociation (Maybe Text)

The error message if the state of an object failed to advance.

directConnectGatewayAssociation_virtualGatewayId :: Lens' DirectConnectGatewayAssociation (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

directConnectGatewayAssociation_virtualGatewayOwnerAccount :: Lens' DirectConnectGatewayAssociation (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual private gateway.

directConnectGatewayAssociation_virtualGatewayRegion :: Lens' DirectConnectGatewayAssociation (Maybe Text)

The Amazon Web Services Region where the virtual private gateway is located.

DirectConnectGatewayAssociationProposal

directConnectGatewayAssociationProposal_associatedGateway :: Lens' DirectConnectGatewayAssociationProposal (Maybe AssociatedGateway)

Information about the associated gateway.

directConnectGatewayAssociationProposal_directConnectGatewayId :: Lens' DirectConnectGatewayAssociationProposal (Maybe Text)

The ID of the Direct Connect gateway.

directConnectGatewayAssociationProposal_directConnectGatewayOwnerAccount :: Lens' DirectConnectGatewayAssociationProposal (Maybe Text)

The ID of the Amazon Web Services account that owns the Direct Connect gateway.

directConnectGatewayAssociationProposal_existingAllowedPrefixesToDirectConnectGateway :: Lens' DirectConnectGatewayAssociationProposal (Maybe [RouteFilterPrefix])

The existing Amazon VPC prefixes advertised to the Direct Connect gateway.

directConnectGatewayAssociationProposal_proposalId :: Lens' DirectConnectGatewayAssociationProposal (Maybe Text)

The ID of the association proposal.

directConnectGatewayAssociationProposal_proposalState :: Lens' DirectConnectGatewayAssociationProposal (Maybe DirectConnectGatewayAssociationProposalState)

The state of the proposal. The following are possible values:

• accepted: The proposal has been accepted. The Direct Connect gateway association is available to use in this state.
• deleted: The proposal has been deleted by the owner that made the proposal. The Direct Connect gateway association cannot be used in this state.
• requested: The proposal has been requested. The Direct Connect gateway association cannot be used in this state.

directConnectGatewayAssociationProposal_requestedAllowedPrefixesToDirectConnectGateway :: Lens' DirectConnectGatewayAssociationProposal (Maybe [RouteFilterPrefix])

The Amazon VPC prefixes to advertise to the Direct Connect gateway.

DirectConnectGatewayAttachment

directConnectGatewayAttachment_attachmentState :: Lens' DirectConnectGatewayAttachment (Maybe DirectConnectGatewayAttachmentState)

The state of the attachment. The following are the possible values:

• attaching: The initial state after a virtual interface is created using the Direct Connect gateway.
• attached: The Direct Connect gateway and virtual interface are attached and ready to pass traffic.
• detaching: The initial state after calling DeleteVirtualInterface.
• detached: The virtual interface is detached from the Direct Connect gateway. Traffic flow between the Direct Connect gateway and virtual interface is stopped.

directConnectGatewayAttachment_attachmentType :: Lens' DirectConnectGatewayAttachment (Maybe DirectConnectGatewayAttachmentType)

The type of attachment.

directConnectGatewayAttachment_directConnectGatewayId :: Lens' DirectConnectGatewayAttachment (Maybe Text)

The ID of the Direct Connect gateway.

directConnectGatewayAttachment_stateChangeError :: Lens' DirectConnectGatewayAttachment (Maybe Text)

The error message if the state of an object failed to advance.

directConnectGatewayAttachment_virtualInterfaceId :: Lens' DirectConnectGatewayAttachment (Maybe Text)

The ID of the virtual interface.

directConnectGatewayAttachment_virtualInterfaceOwnerAccount :: Lens' DirectConnectGatewayAttachment (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

directConnectGatewayAttachment_virtualInterfaceRegion :: Lens' DirectConnectGatewayAttachment (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

Interconnect

interconnect_awsDevice :: Lens' Interconnect (Maybe Text)

The Direct Connect endpoint on which the physical connection terminates.

interconnect_awsDeviceV2 :: Lens' Interconnect (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

interconnect_awsLogicalDeviceId :: Lens' Interconnect (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

interconnect_bandwidth :: Lens' Interconnect (Maybe Text)

The bandwidth of the connection.

interconnect_hasLogicalRedundancy :: Lens' Interconnect (Maybe HasLogicalRedundancy)

Indicates whether the interconnect supports a secondary BGP in the same address family (IPv4/IPv6).

interconnect_interconnectId :: Lens' Interconnect (Maybe Text)

The ID of the interconnect.

interconnect_interconnectName :: Lens' Interconnect (Maybe Text)

The name of the interconnect.

interconnect_interconnectState :: Lens' Interconnect (Maybe InterconnectState)

The state of the interconnect. The following are the possible values:

• requested: The initial state of an interconnect. The interconnect stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
• pending: The interconnect is approved, and is being initialized.
• available: The network link is up, and the interconnect is ready for use.
• down: The network link is down.
• deleting: The interconnect is being deleted.
• deleted: The interconnect is deleted.
• unknown: The state of the interconnect is not available.

interconnect_jumboFrameCapable :: Lens' Interconnect (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

interconnect_lagId :: Lens' Interconnect (Maybe Text)

The ID of the LAG.

interconnect_loaIssueTime :: Lens' Interconnect (Maybe UTCTime)

The time of the most recent call to DescribeLoa for this connection.

interconnect_location :: Lens' Interconnect (Maybe Text)

The location of the connection.

interconnect_providerName :: Lens' Interconnect (Maybe Text)

The name of the service provider associated with the interconnect.

interconnect_region :: Lens' Interconnect (Maybe Text)

The Amazon Web Services Region where the connection is located.

interconnect_tags :: Lens' Interconnect (Maybe (NonEmpty Tag))

The tags associated with the interconnect.

Lag

lag_allowsHostedConnections :: Lens' Lag (Maybe Bool)

Indicates whether the LAG can host other connections.

lag_awsDevice :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsDeviceV2 :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that hosts the LAG.

lag_awsLogicalDeviceId :: Lens' Lag (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

lag_connections :: Lens' Lag (Maybe [Connection])

The connections bundled by the LAG.

lag_connectionsBandwidth :: Lens' Lag (Maybe Text)

The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.

lag_encryptionMode :: Lens' Lag (Maybe Text)

The LAG MAC Security (MACsec) encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

lag_hasLogicalRedundancy :: Lens' Lag (Maybe HasLogicalRedundancy)

Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).

lag_jumboFrameCapable :: Lens' Lag (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

lag_lagId :: Lens' Lag (Maybe Text)

The ID of the LAG.

lag_lagName :: Lens' Lag (Maybe Text)

The name of the LAG.

lag_lagState :: Lens' Lag (Maybe LagState)

The state of the LAG. The following are the possible values:

• requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
• pending: The LAG has been approved and is being initialized.
• available: The network link is established and the LAG is ready for use.
• down: The network link is down.
• deleting: The LAG is being deleted.
• deleted: The LAG is deleted.
• unknown: The state of the LAG is not available.

lag_location :: Lens' Lag (Maybe Text)

The location of the LAG.

lag_macSecCapable :: Lens' Lag (Maybe Bool)

Indicates whether the LAG supports MAC Security (MACsec).

lag_macSecKeys :: Lens' Lag (Maybe [MacSecKey])

The MAC Security (MACsec) security keys associated with the LAG.

lag_minimumLinks :: Lens' Lag (Maybe Int)

The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.

lag_numberOfConnections :: Lens' Lag (Maybe Int)

The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.

lag_ownerAccount :: Lens' Lag (Maybe Text)

The ID of the Amazon Web Services account that owns the LAG.

lag_providerName :: Lens' Lag (Maybe Text)

The name of the service provider associated with the LAG.

lag_region :: Lens' Lag (Maybe Text)

The Amazon Web Services Region where the connection is located.

lag_tags :: Lens' Lag (Maybe (NonEmpty Tag))

The tags associated with the LAG.

Location

location_availableMacSecPortSpeeds :: Lens' Location (Maybe [Text])

The available MAC Security (MACsec) port speeds for the location.

location_availablePortSpeeds :: Lens' Location (Maybe [Text])

The available port speeds for the location.

location_availableProviders :: Lens' Location (Maybe [Text])

The name of the service provider for the location.

location_locationCode :: Lens' Location (Maybe Text)

The code for the location.

location_locationName :: Lens' Location (Maybe Text)

The name of the location. This includes the name of the colocation partner and the physical site of the building.

location_region :: Lens' Location (Maybe Text)

The Amazon Web Services Region for the location.

MacSecKey

macSecKey_ckn :: Lens' MacSecKey (Maybe Text)

The Connection Key Name (CKN) for the MAC Security secret key.

macSecKey_secretARN :: Lens' MacSecKey (Maybe Text)

The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.

macSecKey_startOn :: Lens' MacSecKey (Maybe Text)

The date that the MAC Security (MACsec) secret key takes effect. The value is displayed in UTC format.

macSecKey_state :: Lens' MacSecKey (Maybe Text)

The state of the MAC Security (MACsec) secret key.

The possible values are:

• associating: The MAC Security (MACsec) secret key is being validated and not yet associated with the connection or LAG.
• associated: The MAC Security (MACsec) secret key is validated and associated with the connection or LAG.
• disassociating: The MAC Security (MACsec) secret key is being disassociated from the connection or LAG
• disassociated: The MAC Security (MACsec) secret key is no longer associated with the connection or LAG.

NewBGPPeer

newBGPPeer_addressFamily :: Lens' NewBGPPeer (Maybe AddressFamily)

The address family for the BGP peer.

newBGPPeer_amazonAddress :: Lens' NewBGPPeer (Maybe Text)

The IP address assigned to the Amazon interface.

newBGPPeer_asn :: Lens' NewBGPPeer (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

newBGPPeer_authKey :: Lens' NewBGPPeer (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

newBGPPeer_customerAddress :: Lens' NewBGPPeer (Maybe Text)

The IP address assigned to the customer interface.

NewPrivateVirtualInterface

newPrivateVirtualInterface_addressFamily :: Lens' NewPrivateVirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

newPrivateVirtualInterface_amazonAddress :: Lens' NewPrivateVirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

newPrivateVirtualInterface_authKey :: Lens' NewPrivateVirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

newPrivateVirtualInterface_customerAddress :: Lens' NewPrivateVirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

newPrivateVirtualInterface_directConnectGatewayId :: Lens' NewPrivateVirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

newPrivateVirtualInterface_enableSiteLink :: Lens' NewPrivateVirtualInterface (Maybe Bool)

Indicates whether to enable or disable SiteLink.

newPrivateVirtualInterface_mtu :: Lens' NewPrivateVirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

newPrivateVirtualInterface_tags :: Lens' NewPrivateVirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the private virtual interface.

newPrivateVirtualInterface_virtualGatewayId :: Lens' NewPrivateVirtualInterface (Maybe Text)

The ID of the virtual private gateway.

newPrivateVirtualInterface_virtualInterfaceName :: Lens' NewPrivateVirtualInterface Text

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

newPrivateVirtualInterface_vlan :: Lens' NewPrivateVirtualInterface Int

The ID of the VLAN.

newPrivateVirtualInterface_asn :: Lens' NewPrivateVirtualInterface Int

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

NewPrivateVirtualInterfaceAllocation

newPrivateVirtualInterfaceAllocation_addressFamily :: Lens' NewPrivateVirtualInterfaceAllocation (Maybe AddressFamily)

The address family for the BGP peer.

newPrivateVirtualInterfaceAllocation_amazonAddress :: Lens' NewPrivateVirtualInterfaceAllocation (Maybe Text)

The IP address assigned to the Amazon interface.

newPrivateVirtualInterfaceAllocation_authKey :: Lens' NewPrivateVirtualInterfaceAllocation (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

newPrivateVirtualInterfaceAllocation_customerAddress :: Lens' NewPrivateVirtualInterfaceAllocation (Maybe Text)

The IP address assigned to the customer interface.

newPrivateVirtualInterfaceAllocation_mtu :: Lens' NewPrivateVirtualInterfaceAllocation (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

newPrivateVirtualInterfaceAllocation_tags :: Lens' NewPrivateVirtualInterfaceAllocation (Maybe (NonEmpty Tag))

The tags associated with the private virtual interface.

newPrivateVirtualInterfaceAllocation_virtualInterfaceName :: Lens' NewPrivateVirtualInterfaceAllocation Text

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

newPrivateVirtualInterfaceAllocation_vlan :: Lens' NewPrivateVirtualInterfaceAllocation Int

The ID of the VLAN.

newPrivateVirtualInterfaceAllocation_asn :: Lens' NewPrivateVirtualInterfaceAllocation Int

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

NewPublicVirtualInterface

newPublicVirtualInterface_addressFamily :: Lens' NewPublicVirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

newPublicVirtualInterface_amazonAddress :: Lens' NewPublicVirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

newPublicVirtualInterface_authKey :: Lens' NewPublicVirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

newPublicVirtualInterface_customerAddress :: Lens' NewPublicVirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

newPublicVirtualInterface_routeFilterPrefixes :: Lens' NewPublicVirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

newPublicVirtualInterface_tags :: Lens' NewPublicVirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the public virtual interface.

newPublicVirtualInterface_virtualInterfaceName :: Lens' NewPublicVirtualInterface Text

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

newPublicVirtualInterface_vlan :: Lens' NewPublicVirtualInterface Int

The ID of the VLAN.

newPublicVirtualInterface_asn :: Lens' NewPublicVirtualInterface Int

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

NewPublicVirtualInterfaceAllocation

newPublicVirtualInterfaceAllocation_addressFamily :: Lens' NewPublicVirtualInterfaceAllocation (Maybe AddressFamily)

The address family for the BGP peer.

newPublicVirtualInterfaceAllocation_amazonAddress :: Lens' NewPublicVirtualInterfaceAllocation (Maybe Text)

The IP address assigned to the Amazon interface.

newPublicVirtualInterfaceAllocation_authKey :: Lens' NewPublicVirtualInterfaceAllocation (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

newPublicVirtualInterfaceAllocation_customerAddress :: Lens' NewPublicVirtualInterfaceAllocation (Maybe Text)

The IP address assigned to the customer interface.

newPublicVirtualInterfaceAllocation_routeFilterPrefixes :: Lens' NewPublicVirtualInterfaceAllocation (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

newPublicVirtualInterfaceAllocation_tags :: Lens' NewPublicVirtualInterfaceAllocation (Maybe (NonEmpty Tag))

The tags associated with the public virtual interface.

newPublicVirtualInterfaceAllocation_virtualInterfaceName :: Lens' NewPublicVirtualInterfaceAllocation Text

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

newPublicVirtualInterfaceAllocation_vlan :: Lens' NewPublicVirtualInterfaceAllocation Int

The ID of the VLAN.

newPublicVirtualInterfaceAllocation_asn :: Lens' NewPublicVirtualInterfaceAllocation Int

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

NewTransitVirtualInterface

newTransitVirtualInterface_addressFamily :: Lens' NewTransitVirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

newTransitVirtualInterface_amazonAddress :: Lens' NewTransitVirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

newTransitVirtualInterface_asn :: Lens' NewTransitVirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

newTransitVirtualInterface_authKey :: Lens' NewTransitVirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

newTransitVirtualInterface_customerAddress :: Lens' NewTransitVirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

newTransitVirtualInterface_directConnectGatewayId :: Lens' NewTransitVirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

newTransitVirtualInterface_enableSiteLink :: Lens' NewTransitVirtualInterface (Maybe Bool)

Indicates whether to enable or disable SiteLink.

newTransitVirtualInterface_mtu :: Lens' NewTransitVirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

newTransitVirtualInterface_tags :: Lens' NewTransitVirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the transitive virtual interface.

newTransitVirtualInterface_virtualInterfaceName :: Lens' NewTransitVirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

newTransitVirtualInterface_vlan :: Lens' NewTransitVirtualInterface (Maybe Int)

The ID of the VLAN.

NewTransitVirtualInterfaceAllocation

newTransitVirtualInterfaceAllocation_addressFamily :: Lens' NewTransitVirtualInterfaceAllocation (Maybe AddressFamily)

The address family for the BGP peer.

newTransitVirtualInterfaceAllocation_amazonAddress :: Lens' NewTransitVirtualInterfaceAllocation (Maybe Text)

The IP address assigned to the Amazon interface.

newTransitVirtualInterfaceAllocation_asn :: Lens' NewTransitVirtualInterfaceAllocation (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

newTransitVirtualInterfaceAllocation_authKey :: Lens' NewTransitVirtualInterfaceAllocation (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

newTransitVirtualInterfaceAllocation_customerAddress :: Lens' NewTransitVirtualInterfaceAllocation (Maybe Text)

The IP address assigned to the customer interface.

newTransitVirtualInterfaceAllocation_mtu :: Lens' NewTransitVirtualInterfaceAllocation (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

newTransitVirtualInterfaceAllocation_tags :: Lens' NewTransitVirtualInterfaceAllocation (Maybe (NonEmpty Tag))

The tags associated with the transitive virtual interface.

newTransitVirtualInterfaceAllocation_virtualInterfaceName :: Lens' NewTransitVirtualInterfaceAllocation (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

newTransitVirtualInterfaceAllocation_vlan :: Lens' NewTransitVirtualInterfaceAllocation (Maybe Int)

The ID of the VLAN.

ResourceTag

resourceTag_resourceArn :: Lens' ResourceTag (Maybe Text)

The Amazon Resource Name (ARN) of the resource.

resourceTag_tags :: Lens' ResourceTag (Maybe (NonEmpty Tag))

The tags.

RouteFilterPrefix

routeFilterPrefix_cidr :: Lens' RouteFilterPrefix (Maybe Text)

The CIDR block for the advertised route. Separate multiple routes using commas. An IPv6 CIDR must use /64 or shorter.

RouterType

routerType_platform :: Lens' RouterType (Maybe Text)

The virtual interface router platform.

routerType_routerTypeIdentifier :: Lens' RouterType (Maybe Text)

Identifies the router by a combination of vendor, platform, and software version. For example, CiscoSystemsInc-2900SeriesRouters-IOS124.

routerType_software :: Lens' RouterType (Maybe Text)

The router software.

routerType_vendor :: Lens' RouterType (Maybe Text)

The vendor for the virtual interface's router.

routerType_xsltTemplateName :: Lens' RouterType (Maybe Text)

The template for the virtual interface's router.

routerType_xsltTemplateNameForMacSec :: Lens' RouterType (Maybe Text)

The MAC Security (MACsec) template for the virtual interface's router.

Tag

tag_value :: Lens' Tag (Maybe Text)

The value.

tag_key :: Lens' Tag Text

The key.

VirtualGateway

virtualGateway_virtualGatewayId :: Lens' VirtualGateway (Maybe Text)

The ID of the virtual private gateway.

virtualGateway_virtualGatewayState :: Lens' VirtualGateway (Maybe Text)

The state of the virtual private gateway. The following are the possible values:

• pending: Initial state after creating the virtual private gateway.
• available: Ready for use by a private virtual interface.
• deleting: Initial state after deleting the virtual private gateway.
• deleted: The virtual private gateway is deleted. The private virtual interface is unable to send traffic over this gateway.

VirtualInterface

virtualInterface_addressFamily :: Lens' VirtualInterface (Maybe AddressFamily)

The address family for the BGP peer.

virtualInterface_amazonAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the Amazon interface.

virtualInterface_amazonSideAsn :: Lens' VirtualInterface (Maybe Integer)

The autonomous system number (ASN) for the Amazon side of the connection.

virtualInterface_asn :: Lens' VirtualInterface (Maybe Int)

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

virtualInterface_authKey :: Lens' VirtualInterface (Maybe Text)

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

virtualInterface_awsDeviceV2 :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the physical connection.

virtualInterface_awsLogicalDeviceId :: Lens' VirtualInterface (Maybe Text)

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

virtualInterface_bgpPeers :: Lens' VirtualInterface (Maybe [BGPPeer])

The BGP peers configured on this virtual interface.

virtualInterface_connectionId :: Lens' VirtualInterface (Maybe Text)

The ID of the connection.

virtualInterface_customerAddress :: Lens' VirtualInterface (Maybe Text)

The IP address assigned to the customer interface.

virtualInterface_customerRouterConfig :: Lens' VirtualInterface (Maybe Text)

The customer router configuration.

virtualInterface_directConnectGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the Direct Connect gateway.

virtualInterface_jumboFrameCapable :: Lens' VirtualInterface (Maybe Bool)

Indicates whether jumbo frames (9001 MTU) are supported.

virtualInterface_location :: Lens' VirtualInterface (Maybe Text)

The location of the connection.

virtualInterface_mtu :: Lens' VirtualInterface (Maybe Int)

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

virtualInterface_ownerAccount :: Lens' VirtualInterface (Maybe Text)

The ID of the Amazon Web Services account that owns the virtual interface.

virtualInterface_region :: Lens' VirtualInterface (Maybe Text)

The Amazon Web Services Region where the virtual interface is located.

virtualInterface_routeFilterPrefixes :: Lens' VirtualInterface (Maybe [RouteFilterPrefix])

The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

virtualInterface_siteLinkEnabled :: Lens' VirtualInterface (Maybe Bool)

Indicates whether SiteLink is enabled.

virtualInterface_tags :: Lens' VirtualInterface (Maybe (NonEmpty Tag))

The tags associated with the virtual interface.

virtualInterface_virtualGatewayId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual private gateway. Applies only to private virtual interfaces.

virtualInterface_virtualInterfaceId :: Lens' VirtualInterface (Maybe Text)

The ID of the virtual interface.

virtualInterface_virtualInterfaceName :: Lens' VirtualInterface (Maybe Text)

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

virtualInterface_virtualInterfaceState :: Lens' VirtualInterface (Maybe VirtualInterfaceState)

The state of the virtual interface. The following are the possible values:

• confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
• verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
• pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
• available: A virtual interface that is able to forward traffic.
• down: A virtual interface that is BGP down.
• deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
• deleted: A virtual interface that cannot forward traffic.
• rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.
• unknown: The state of the virtual interface is not available.

virtualInterface_virtualInterfaceType :: Lens' VirtualInterface (Maybe Text)

The type of virtual interface. The possible values are private and public.

virtualInterface_vlan :: Lens' VirtualInterface (Maybe Int)

The ID of the VLAN.

VirtualInterfaceTestHistory

virtualInterfaceTestHistory_bgpPeers :: Lens' VirtualInterfaceTestHistory (Maybe [Text])

The BGP peers that were put in the DOWN state as part of the virtual interface failover test.

virtualInterfaceTestHistory_endTime :: Lens' VirtualInterfaceTestHistory (Maybe UTCTime)

The time that the virtual interface moves out of the DOWN state.

virtualInterfaceTestHistory_ownerAccount :: Lens' VirtualInterfaceTestHistory (Maybe Text)

The owner ID of the tested virtual interface.

virtualInterfaceTestHistory_startTime :: Lens' VirtualInterfaceTestHistory (Maybe UTCTime)

The time that the virtual interface moves to the DOWN state.

virtualInterfaceTestHistory_status :: Lens' VirtualInterfaceTestHistory (Maybe Text)

The status of the virtual interface failover test.

virtualInterfaceTestHistory_testDurationInMinutes :: Lens' VirtualInterfaceTestHistory (Maybe Int)

The time that the virtual interface failover test ran in minutes.

virtualInterfaceTestHistory_testId :: Lens' VirtualInterfaceTestHistory (Maybe Text)

The ID of the virtual interface failover test.

virtualInterfaceTestHistory_virtualInterfaceId :: Lens' VirtualInterfaceTestHistory (Maybe Text)

The ID of the tested virtual interface.