{-# LANGUAGE DeriveDataTypeable #-} {-# LANGUAGE DeriveGeneric #-} {-# LANGUAGE OverloadedStrings #-} {-# LANGUAGE RecordWildCards #-} {-# LANGUAGE TypeFamilies #-} {-# OPTIONS_GHC -fno-warn-unused-imports #-} {-# OPTIONS_GHC -fno-warn-unused-binds #-} {-# OPTIONS_GHC -fno-warn-unused-matches #-} -- Derived from AWS service descriptions, licensed under Apache 2.0. -- | -- Module : Network.AWS.DynamoDB.Scan -- Copyright : (c) 2013-2016 Brendan Hay -- License : Mozilla Public License, v. 2.0. -- Maintainer : Brendan Hay -- Stability : auto-generated -- Portability : non-portable (GHC extensions) -- -- The /Scan/ operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a /ScanFilter/ operation. -- -- If the total number of scanned items exceeds the maximum data set size limit of 1 MB, the scan stops and results are returned to the user as a /LastEvaluatedKey/ value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria. -- -- By default, /Scan/ operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel /Scan/ operation by providing the /Segment/ and /TotalSegments/ parameters. For more information, see in the /Amazon DynamoDB Developer Guide/. -- -- By default, /Scan/ uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the /ConsistentRead/ parameter to /true/. -- -- This operation returns paginated results. module Network.AWS.DynamoDB.Scan ( -- * Creating a Request scan , Scan -- * Request Lenses , sProjectionExpression , sScanFilter , sAttributesToGet , sTotalSegments , sExpressionAttributeNames , sFilterExpression , sConsistentRead , sExpressionAttributeValues , sReturnConsumedCapacity , sLimit , sSelect , sSegment , sConditionalOperator , sExclusiveStartKey , sIndexName , sTableName -- * Destructuring the Response , scanResponse , ScanResponse -- * Response Lenses , srsLastEvaluatedKey , srsCount , srsScannedCount , srsItems , srsConsumedCapacity , srsResponseStatus ) where import Network.AWS.DynamoDB.Types import Network.AWS.DynamoDB.Types.Product import Network.AWS.Lens import Network.AWS.Pager import Network.AWS.Prelude import Network.AWS.Request import Network.AWS.Response -- | Represents the input of a /Scan/ operation. -- -- /See:/ 'scan' smart constructor. data Scan = Scan' { _sProjectionExpression :: !(Maybe Text) , _sScanFilter :: !(Maybe (Map Text Condition)) , _sAttributesToGet :: !(Maybe (List1 Text)) , _sTotalSegments :: !(Maybe Nat) , _sExpressionAttributeNames :: !(Maybe (Map Text Text)) , _sFilterExpression :: !(Maybe Text) , _sConsistentRead :: !(Maybe Bool) , _sExpressionAttributeValues :: !(Maybe (Map Text AttributeValue)) , _sReturnConsumedCapacity :: !(Maybe ReturnConsumedCapacity) , _sLimit :: !(Maybe Nat) , _sSelect :: !(Maybe Select) , _sSegment :: !(Maybe Nat) , _sConditionalOperator :: !(Maybe ConditionalOperator) , _sExclusiveStartKey :: !(Maybe (Map Text AttributeValue)) , _sIndexName :: !(Maybe Text) , _sTableName :: !Text } deriving (Eq,Read,Show,Data,Typeable,Generic) -- | Creates a value of 'Scan' with the minimum fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- * 'sProjectionExpression' -- -- * 'sScanFilter' -- -- * 'sAttributesToGet' -- -- * 'sTotalSegments' -- -- * 'sExpressionAttributeNames' -- -- * 'sFilterExpression' -- -- * 'sConsistentRead' -- -- * 'sExpressionAttributeValues' -- -- * 'sReturnConsumedCapacity' -- -- * 'sLimit' -- -- * 'sSelect' -- -- * 'sSegment' -- -- * 'sConditionalOperator' -- -- * 'sExclusiveStartKey' -- -- * 'sIndexName' -- -- * 'sTableName' scan :: Text -- ^ 'sTableName' -> Scan scan pTableName_ = Scan' { _sProjectionExpression = Nothing , _sScanFilter = Nothing , _sAttributesToGet = Nothing , _sTotalSegments = Nothing , _sExpressionAttributeNames = Nothing , _sFilterExpression = Nothing , _sConsistentRead = Nothing , _sExpressionAttributeValues = Nothing , _sReturnConsumedCapacity = Nothing , _sLimit = Nothing , _sSelect = Nothing , _sSegment = Nothing , _sConditionalOperator = Nothing , _sExclusiveStartKey = Nothing , _sIndexName = Nothing , _sTableName = pTableName_ } -- | A string that identifies one or more attributes to retrieve from the specified table or index. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas. -- -- If no attribute names are specified, then all attributes will be returned. If any of the requested attributes are not found, they will not appear in the result. -- -- For more information, see in the /Amazon DynamoDB Developer Guide/. -- -- /ProjectionExpression/ replaces the legacy /AttributesToGet/ parameter. sProjectionExpression :: Lens' Scan (Maybe Text) sProjectionExpression = lens _sProjectionExpression (\ s a -> s{_sProjectionExpression = a}); -- | This is a legacy parameter, for backward compatibility. New applications should use /FilterExpression/ instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a /ValidationException/ exception. -- -- A condition that evaluates the scan results and returns only the desired values. -- -- This parameter does not support attributes of type List or Map. -- -- If you specify more than one condition in the /ScanFilter/ map, then by default all of the conditions must evaluate to true. In other words, the conditions are ANDed together. (You can use the /ConditionalOperator/ parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to true, rather than all of them.) -- -- Each /ScanFilter/ element consists of an attribute name to compare, along with the following: -- -- - /AttributeValueList/ - One or more values to evaluate against the supplied attribute. The number of values in the list depends on the operator specified in /ComparisonOperator/ . -- -- For type Number, value comparisons are numeric. -- -- String value comparisons for greater than, equals, or less than are based on ASCII character code values. For example, 'a' is greater than 'A', and 'a' is greater than 'B'. For a list of code values, see . -- -- For Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values. -- -- For information on specifying data types in JSON, see in the /Amazon DynamoDB Developer Guide/. -- -- - /ComparisonOperator/ - A comparator for evaluating attributes. For example, equals, greater than, less than, etc. -- -- The following comparison operators are available: -- -- 'EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN' -- -- For complete descriptions of all comparison operators, see . -- sScanFilter :: Lens' Scan (HashMap Text Condition) sScanFilter = lens _sScanFilter (\ s a -> s{_sScanFilter = a}) . _Default . _Map; -- | This is a legacy parameter, for backward compatibility. New applications should use /ProjectionExpression/ instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a /ValidationException/ exception. -- -- This parameter allows you to retrieve attributes of type List or Map; however, it cannot retrieve individual elements within a List or a Map. -- -- The names of one or more attributes to retrieve. If no attribute names are provided, then all attributes will be returned. If any of the requested attributes are not found, they will not appear in the result. -- -- Note that /AttributesToGet/ has no effect on provisioned throughput consumption. DynamoDB determines capacity units consumed based on item size, not on the amount of data that is returned to an application. sAttributesToGet :: Lens' Scan (Maybe (NonEmpty Text)) sAttributesToGet = lens _sAttributesToGet (\ s a -> s{_sAttributesToGet = a}) . mapping _List1; -- | For a parallel /Scan/ request, /TotalSegments/ represents the total number of segments into which the /Scan/ operation will be divided. The value of /TotalSegments/ corresponds to the number of application workers that will perform the parallel scan. For example, if you want to use four application threads to scan a table or an index, specify a /TotalSegments/ value of 4. -- -- The value for /TotalSegments/ must be greater than or equal to 1, and less than or equal to 1000000. If you specify a /TotalSegments/ value of 1, the /Scan/ operation will be sequential rather than parallel. -- -- If you specify /TotalSegments/, you must also specify /Segment/. sTotalSegments :: Lens' Scan (Maybe Natural) sTotalSegments = lens _sTotalSegments (\ s a -> s{_sTotalSegments = a}) . mapping _Nat; -- | One or more substitution tokens for attribute names in an expression. The following are some use cases for using /ExpressionAttributeNames/: -- -- - To access an attribute whose name conflicts with a DynamoDB reserved word. -- -- - To create a placeholder for repeating occurrences of an attribute name in an expression. -- -- - To prevent special characters in an attribute name from being misinterpreted in an expression. -- -- Use the __#__ character in an expression to dereference an attribute name. For example, consider the following attribute name: -- -- - 'Percentile' -- -- The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see in the /Amazon DynamoDB Developer Guide/). To work around this, you could specify the following for /ExpressionAttributeNames/: -- -- - '{\"#P\":\"Percentile\"}' -- -- You could then use this substitution in an expression, as in this example: -- -- - '#P = :val' -- -- Tokens that begin with the __:__ character are /expression attribute values/, which are placeholders for the actual value at runtime. -- -- For more information on expression attribute names, see in the /Amazon DynamoDB Developer Guide/. sExpressionAttributeNames :: Lens' Scan (HashMap Text Text) sExpressionAttributeNames = lens _sExpressionAttributeNames (\ s a -> s{_sExpressionAttributeNames = a}) . _Default . _Map; -- | A string that contains conditions that DynamoDB applies after the /Scan/ operation, but before the data is returned to you. Items that do not satisfy the /FilterExpression/ criteria are not returned. -- -- A /FilterExpression/ is applied after the items have already been read; the process of filtering does not consume any additional read capacity units. -- -- For more information, see in the /Amazon DynamoDB Developer Guide/. -- -- /FilterExpression/ replaces the legacy /ScanFilter/ and /ConditionalOperator/ parameters. sFilterExpression :: Lens' Scan (Maybe Text) sFilterExpression = lens _sFilterExpression (\ s a -> s{_sFilterExpression = a}); -- | A Boolean value that determines the read consistency model during the scan: -- -- - If /ConsistentRead/ is 'false', then the data returned from /Scan/ might not contain the results from other recently completed write operations (PutItem, UpdateItem or DeleteItem). -- -- - If /ConsistentRead/ is 'true', then all of the write operations that completed before the /Scan/ began are guaranteed to be contained in the /Scan/ response. -- -- The default setting for /ConsistentRead/ is 'false'. -- -- The /ConsistentRead/ parameter is not supported on global secondary indexes. If you scan a global secondary index with /ConsistentRead/ set to true, you will receive a /ValidationException/. sConsistentRead :: Lens' Scan (Maybe Bool) sConsistentRead = lens _sConsistentRead (\ s a -> s{_sConsistentRead = a}); -- | One or more values that can be substituted in an expression. -- -- Use the __:__ (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the /ProductStatus/ attribute was one of the following: -- -- 'Available | Backordered | Discontinued' -- -- You would first need to specify /ExpressionAttributeValues/ as follows: -- -- '{ \":avail\":{\"S\":\"Available\"}, \":back\":{\"S\":\"Backordered\"}, \":disc\":{\"S\":\"Discontinued\"} }' -- -- You could then use these values in an expression, such as this: -- -- 'ProductStatus IN (:avail, :back, :disc)' -- -- For more information on expression attribute values, see in the /Amazon DynamoDB Developer Guide/. sExpressionAttributeValues :: Lens' Scan (HashMap Text AttributeValue) sExpressionAttributeValues = lens _sExpressionAttributeValues (\ s a -> s{_sExpressionAttributeValues = a}) . _Default . _Map; -- | Undocumented member. sReturnConsumedCapacity :: Lens' Scan (Maybe ReturnConsumedCapacity) sReturnConsumedCapacity = lens _sReturnConsumedCapacity (\ s a -> s{_sReturnConsumedCapacity = a}); -- | The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, and a key in /LastEvaluatedKey/ to apply in a subsequent operation, so that you can pick up where you left off. Also, if the processed data set size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in /LastEvaluatedKey/ to apply in a subsequent operation to continue the operation. For more information, see in the /Amazon DynamoDB Developer Guide/. sLimit :: Lens' Scan (Maybe Natural) sLimit = lens _sLimit (\ s a -> s{_sLimit = a}) . mapping _Nat; -- | The attributes to be returned in the result. You can retrieve all item attributes, specific item attributes, or the count of matching items. -- -- - 'ALL_ATTRIBUTES' - Returns all of the item attributes. -- -- - 'COUNT' - Returns the number of matching items, rather than the matching items themselves. -- -- - 'SPECIFIC_ATTRIBUTES' - Returns only the attributes listed in /AttributesToGet/. This return value is equivalent to specifying /AttributesToGet/ without specifying any value for /Select/. -- -- If neither /Select/ nor /AttributesToGet/ are specified, DynamoDB defaults to 'ALL_ATTRIBUTES'. You cannot use both /AttributesToGet/ and /Select/ together in a single request, unless the value for /Select/ is 'SPECIFIC_ATTRIBUTES'. (This usage is equivalent to specifying /AttributesToGet/ without any value for /Select/.) sSelect :: Lens' Scan (Maybe Select) sSelect = lens _sSelect (\ s a -> s{_sSelect = a}); -- | For a parallel /Scan/ request, /Segment/ identifies an individual segment to be scanned by an application worker. -- -- Segment IDs are zero-based, so the first segment is always 0. For example, if you want to use four application threads to scan a table or an index, then the first thread specifies a /Segment/ value of 0, the second thread specifies 1, and so on. -- -- The value of /LastEvaluatedKey/ returned from a parallel /Scan/ request must be used as /ExclusiveStartKey/ with the same segment ID in a subsequent /Scan/ operation. -- -- The value for /Segment/ must be greater than or equal to 0, and less than the value provided for /TotalSegments/. -- -- If you provide /Segment/, you must also provide /TotalSegments/. sSegment :: Lens' Scan (Maybe Natural) sSegment = lens _sSegment (\ s a -> s{_sSegment = a}) . mapping _Nat; -- | This is a legacy parameter, for backward compatibility. New applications should use /FilterExpression/ instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a /ValidationException/ exception. -- -- A logical operator to apply to the conditions in a /ScanFilter/ map: -- -- - 'AND' - If all of the conditions evaluate to true, then the entire map evaluates to true. -- -- - 'OR' - If at least one of the conditions evaluate to true, then the entire map evaluates to true. -- -- If you omit /ConditionalOperator/, then 'AND' is the default. -- -- The operation will succeed only if the entire map evaluates to true. -- -- This parameter does not support attributes of type List or Map. sConditionalOperator :: Lens' Scan (Maybe ConditionalOperator) sConditionalOperator = lens _sConditionalOperator (\ s a -> s{_sConditionalOperator = a}); -- | The primary key of the first item that this operation will evaluate. Use the value that was returned for /LastEvaluatedKey/ in the previous operation. -- -- The data type for /ExclusiveStartKey/ must be String, Number or Binary. No set data types are allowed. -- -- In a parallel scan, a /Scan/ request that includes /ExclusiveStartKey/ must specify the same segment whose previous /Scan/ returned the corresponding value of /LastEvaluatedKey/. sExclusiveStartKey :: Lens' Scan (HashMap Text AttributeValue) sExclusiveStartKey = lens _sExclusiveStartKey (\ s a -> s{_sExclusiveStartKey = a}) . _Default . _Map; -- | The name of a secondary index to scan. This index can be any local secondary index or global secondary index. Note that if you use the 'IndexName' parameter, you must also provide 'TableName'. sIndexName :: Lens' Scan (Maybe Text) sIndexName = lens _sIndexName (\ s a -> s{_sIndexName = a}); -- | The name of the table containing the requested items; or, if you provide 'IndexName', the name of the table to which that index belongs. sTableName :: Lens' Scan Text sTableName = lens _sTableName (\ s a -> s{_sTableName = a}); instance AWSPager Scan where page rq rs | stop (rs ^. srsLastEvaluatedKey) = Nothing | stop (rs ^. srsItems) = Nothing | stop (rs ^. srsCount) = Nothing | stop (rs ^. srsScannedCount) = Nothing | otherwise = Just $ rq & sExclusiveStartKey .~ rs ^. srsLastEvaluatedKey instance AWSRequest Scan where type Rs Scan = ScanResponse request = postJSON dynamoDB response = receiveJSON (\ s h x -> ScanResponse' <$> (x .?> "LastEvaluatedKey" .!@ mempty) <*> (x .?> "Count") <*> (x .?> "ScannedCount") <*> (x .?> "Items" .!@ mempty) <*> (x .?> "ConsumedCapacity") <*> (pure (fromEnum s))) instance Hashable Scan instance NFData Scan instance ToHeaders Scan where toHeaders = const (mconcat ["X-Amz-Target" =# ("DynamoDB_20120810.Scan" :: ByteString), "Content-Type" =# ("application/x-amz-json-1.0" :: ByteString)]) instance ToJSON Scan where toJSON Scan'{..} = object (catMaybes [("ProjectionExpression" .=) <$> _sProjectionExpression, ("ScanFilter" .=) <$> _sScanFilter, ("AttributesToGet" .=) <$> _sAttributesToGet, ("TotalSegments" .=) <$> _sTotalSegments, ("ExpressionAttributeNames" .=) <$> _sExpressionAttributeNames, ("FilterExpression" .=) <$> _sFilterExpression, ("ConsistentRead" .=) <$> _sConsistentRead, ("ExpressionAttributeValues" .=) <$> _sExpressionAttributeValues, ("ReturnConsumedCapacity" .=) <$> _sReturnConsumedCapacity, ("Limit" .=) <$> _sLimit, ("Select" .=) <$> _sSelect, ("Segment" .=) <$> _sSegment, ("ConditionalOperator" .=) <$> _sConditionalOperator, ("ExclusiveStartKey" .=) <$> _sExclusiveStartKey, ("IndexName" .=) <$> _sIndexName, Just ("TableName" .= _sTableName)]) instance ToPath Scan where toPath = const "/" instance ToQuery Scan where toQuery = const mempty -- | Represents the output of a /Scan/ operation. -- -- /See:/ 'scanResponse' smart constructor. data ScanResponse = ScanResponse' { _srsLastEvaluatedKey :: !(Maybe (Map Text AttributeValue)) , _srsCount :: !(Maybe Int) , _srsScannedCount :: !(Maybe Int) , _srsItems :: !(Maybe [Map Text AttributeValue]) , _srsConsumedCapacity :: !(Maybe ConsumedCapacity) , _srsResponseStatus :: !Int } deriving (Eq,Read,Show,Data,Typeable,Generic) -- | Creates a value of 'ScanResponse' with the minimum fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- * 'srsLastEvaluatedKey' -- -- * 'srsCount' -- -- * 'srsScannedCount' -- -- * 'srsItems' -- -- * 'srsConsumedCapacity' -- -- * 'srsResponseStatus' scanResponse :: Int -- ^ 'srsResponseStatus' -> ScanResponse scanResponse pResponseStatus_ = ScanResponse' { _srsLastEvaluatedKey = Nothing , _srsCount = Nothing , _srsScannedCount = Nothing , _srsItems = Nothing , _srsConsumedCapacity = Nothing , _srsResponseStatus = pResponseStatus_ } -- | The primary key of the item where the operation stopped, inclusive of the previous result set. Use this value to start a new operation, excluding this value in the new request. -- -- If /LastEvaluatedKey/ is empty, then the \"last page\" of results has been processed and there is no more data to be retrieved. -- -- If /LastEvaluatedKey/ is not empty, it does not necessarily mean that there is more data in the result set. The only way to know when you have reached the end of the result set is when /LastEvaluatedKey/ is empty. srsLastEvaluatedKey :: Lens' ScanResponse (HashMap Text AttributeValue) srsLastEvaluatedKey = lens _srsLastEvaluatedKey (\ s a -> s{_srsLastEvaluatedKey = a}) . _Default . _Map; -- | The number of items in the response. -- -- If you set /ScanFilter/ in the request, then /Count/ is the number of items returned after the filter was applied, and /ScannedCount/ is the number of matching items before the filter was applied. -- -- If you did not use a filter in the request, then /Count/ is the same as /ScannedCount/. srsCount :: Lens' ScanResponse (Maybe Int) srsCount = lens _srsCount (\ s a -> s{_srsCount = a}); -- | The number of items evaluated, before any /ScanFilter/ is applied. A high /ScannedCount/ value with few, or no, /Count/ results indicates an inefficient /Scan/ operation. For more information, see in the /Amazon DynamoDB Developer Guide/. -- -- If you did not use a filter in the request, then /ScannedCount/ is the same as /Count/. srsScannedCount :: Lens' ScanResponse (Maybe Int) srsScannedCount = lens _srsScannedCount (\ s a -> s{_srsScannedCount = a}); -- | An array of item attributes that match the scan criteria. Each element in this array consists of an attribute name and the value for that attribute. srsItems :: Lens' ScanResponse [HashMap Text AttributeValue] srsItems = lens _srsItems (\ s a -> s{_srsItems = a}) . _Default . _Coerce; -- | Undocumented member. srsConsumedCapacity :: Lens' ScanResponse (Maybe ConsumedCapacity) srsConsumedCapacity = lens _srsConsumedCapacity (\ s a -> s{_srsConsumedCapacity = a}); -- | The response status code. srsResponseStatus :: Lens' ScanResponse Int srsResponseStatus = lens _srsResponseStatus (\ s a -> s{_srsResponseStatus = a}); instance NFData ScanResponse