Network.AWS.ElasticTranscoder

AWS Elastic Transcoder Service

The AWS Elastic Transcoder Service.

Service Configuration

elasticTranscoder :: Service

API version 2012-09-25 of the Amazon Elastic Transcoder SDK configuration.

Errors

Error matchers are designed for use with the functions provided by Control.Exception.Lens. This allows catching (and rethrowing) service specific errors returned by ElasticTranscoder.

IncompatibleVersionException

_IncompatibleVersionException :: AsError a => Getting (First ServiceError) a ServiceError

Prism for IncompatibleVersionException' errors.

ValidationException

_ValidationException :: AsError a => Getting (First ServiceError) a ServiceError

One or more required parameter values were not provided in the request.

AccessDeniedException

_AccessDeniedException :: AsError a => Getting (First ServiceError) a ServiceError

General authentication failure. The request was not signed correctly.

InternalServiceException

_InternalServiceException :: AsError a => Getting (First ServiceError) a ServiceError

Elastic Transcoder encountered an unexpected exception while trying to fulfill the request.

ResourceNotFoundException

_ResourceNotFoundException :: AsError a => Getting (First ServiceError) a ServiceError

The requested resource does not exist or is not available. For example, the pipeline to which you're trying to add a job doesn't exist or is still being created.

LimitExceededException

_LimitExceededException :: AsError a => Getting (First ServiceError) a ServiceError

Too many operations for a given AWS account. For example, the number of pipelines exceeds the maximum allowed.

ResourceInUseException

_ResourceInUseException :: AsError a => Getting (First ServiceError) a ServiceError

The resource you are attempting to change is in use. For example, you are attempting to delete a pipeline that is currently in use.

Waiters

Waiters poll by repeatedly sending a request until some remote success condition configured by the Wait specification is fulfilled. The Wait specification determines how many attempts should be made, in addition to delay and retry strategies.

JobComplete

jobComplete :: Wait ReadJob

Polls ReadJob every 30 seconds until a successful state is reached. An error is returned after 120 failed checks.

Operations

Some AWS operations return results that are incomplete and require subsequent requests in order to obtain the entire result set. The process of sending subsequent requests to continue where a previous request left off is called pagination. For example, the ListObjects operation of Amazon S3 returns up to 1000 objects at a time, and you must send subsequent requests with the appropriate Marker in order to retrieve the next page of results.

Operations that have an AWSPager instance can transparently perform subsequent requests, correctly setting Markers and other request facets to iterate through the entire result set of a truncated API operation. Operations which support this have an additional note in the documentation.

Many operations have the ability to filter results on the server side. See the individual operation parameters for details.

DeletePreset

module Network.AWS.ElasticTranscoder.DeletePreset

UpdatePipelineStatus

module Network.AWS.ElasticTranscoder.UpdatePipelineStatus

ListJobsByPipeline (Paginated)

module Network.AWS.ElasticTranscoder.ListJobsByPipeline

UpdatePipeline

module Network.AWS.ElasticTranscoder.UpdatePipeline

DeletePipeline

module Network.AWS.ElasticTranscoder.DeletePipeline

CreateJob

module Network.AWS.ElasticTranscoder.CreateJob

ListPipelines (Paginated)

module Network.AWS.ElasticTranscoder.ListPipelines

CreatePreset

module Network.AWS.ElasticTranscoder.CreatePreset

ListPresets (Paginated)

module Network.AWS.ElasticTranscoder.ListPresets

ReadPreset

module Network.AWS.ElasticTranscoder.ReadPreset

ReadJob

module Network.AWS.ElasticTranscoder.ReadJob

UpdatePipelineNotifications

module Network.AWS.ElasticTranscoder.UpdatePipelineNotifications

ReadPipeline

module Network.AWS.ElasticTranscoder.ReadPipeline

CreatePipeline

module Network.AWS.ElasticTranscoder.CreatePipeline

ListJobsByStatus (Paginated)

module Network.AWS.ElasticTranscoder.ListJobsByStatus

CancelJob

module Network.AWS.ElasticTranscoder.CancelJob

Types

Artwork

data Artwork

The file to be used as album art. There can be multiple artworks associated with an audio file, to a maximum of 20.

To remove artwork or leave the artwork empty, you can either set Artwork to null, or set the Merge Policy to Replace and use an empty Artwork array.

To pass through existing artwork unchanged, set the Merge Policy to Prepend, Append, or Fallback, and use an empty Artwork array.

See: artwork smart constructor.

Instances

Eq Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Artwork -> Artwork -> Bool

(/=) :: Artwork -> Artwork -> Bool

Data Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Artwork -> c Artwork

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Artwork

toConstr :: Artwork -> Constr

dataTypeOf :: Artwork -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Artwork)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Artwork)

gmapT :: (forall b. Data b => b -> b) -> Artwork -> Artwork

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Artwork -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Artwork -> r

gmapQ :: (forall d. Data d => d -> u) -> Artwork -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Artwork -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Artwork -> m Artwork

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Artwork -> m Artwork

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Artwork -> m Artwork

Read Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Artwork

readList :: ReadS [Artwork]

readPrec :: ReadPrec Artwork

readListPrec :: ReadPrec [Artwork]

Show Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Artwork -> ShowS

show :: Artwork -> String

showList :: [Artwork] -> ShowS

Generic Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Artwork :: Type -> Type

Methods

from :: Artwork -> Rep Artwork x

to :: Rep Artwork x -> Artwork

Hashable Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Artwork -> Int

hash :: Artwork -> Int

ToJSON Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: Artwork -> Value

toEncoding :: Artwork -> Encoding

toJSONList :: [Artwork] -> Value

toEncodingList :: [Artwork] -> Encoding

FromJSON Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Artwork

parseJSONList :: Value -> Parser [Artwork]

NFData Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Artwork -> ()

type Rep Artwork

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Artwork = D1 (MetaData "Artwork" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "Artwork'" PrefixI True) ((S1 (MetaSel (Just "_aSizingPolicy") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_aAlbumArtFormat") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_aMaxHeight") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 (MetaSel (Just "_aInputKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_aPaddingPolicy") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_aEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption)) :*: S1 (MetaSel (Just "_aMaxWidth") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))))

artwork :: Artwork

Creates a value of Artwork with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• aSizingPolicy - Specify one of the following values to control scaling of the output album art: * Fit: Elastic Transcoder scales the output art so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value. * Fill: Elastic Transcoder scales the output art so it matches the value that you specified in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder centers the output art and then crops it in the dimension (if any) that exceeds the maximum value. * Stretch: Elastic Transcoder stretches the output art to match the values that you specified for MaxWidth and MaxHeight . If the relative proportions of the input art and the output art are different, the output art will be distorted. * Keep: Elastic Transcoder does not scale the output art. If either dimension of the input art exceeds the values that you specified for MaxWidth and MaxHeight , Elastic Transcoder crops the output art. * ShrinkToFit: Elastic Transcoder scales the output art down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the art up. * ShrinkToFill Elastic Transcoder scales the output art down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale the art up.
• aAlbumArtFormat - The format of album art, if any. Valid formats are .jpg and .png .
• aMaxHeight - The maximum height of the output album art in pixels. If you specify auto , Elastic Transcoder uses 600 as the default value. If you specify a numeric value, enter an even integer between 32 and 3072, inclusive.
• aInputKey - The name of the file to be used as album art. To determine which Amazon S3 bucket contains the specified file, Elastic Transcoder checks the pipeline specified by PipelineId ; the InputBucket object in that pipeline identifies the bucket. If the file name includes a prefix, for example, cooking/pie.jpg , include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.
• aPaddingPolicy - When you set PaddingPolicy to Pad , Elastic Transcoder may add white bars to the top and bottom and/or left and right sides of the output album art to make the total size of the output art match the values that you specified for MaxWidth and MaxHeight .
• aEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your artwork.
• aMaxWidth - The maximum width of the output album art in pixels. If you specify auto , Elastic Transcoder uses 600 as the default value. If you specify a numeric value, enter an even integer between 32 and 4096, inclusive.

aSizingPolicy :: Lens' Artwork (Maybe Text)

Specify one of the following values to control scaling of the output album art: * Fit: Elastic Transcoder scales the output art so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value. * Fill: Elastic Transcoder scales the output art so it matches the value that you specified in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder centers the output art and then crops it in the dimension (if any) that exceeds the maximum value. * Stretch: Elastic Transcoder stretches the output art to match the values that you specified for MaxWidth and MaxHeight . If the relative proportions of the input art and the output art are different, the output art will be distorted. * Keep: Elastic Transcoder does not scale the output art. If either dimension of the input art exceeds the values that you specified for MaxWidth and MaxHeight , Elastic Transcoder crops the output art. * ShrinkToFit: Elastic Transcoder scales the output art down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the art up. * ShrinkToFill Elastic Transcoder scales the output art down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale the art up.

aAlbumArtFormat :: Lens' Artwork (Maybe Text)

The format of album art, if any. Valid formats are .jpg and .png .

aMaxHeight :: Lens' Artwork (Maybe Text)

The maximum height of the output album art in pixels. If you specify auto , Elastic Transcoder uses 600 as the default value. If you specify a numeric value, enter an even integer between 32 and 3072, inclusive.

aInputKey :: Lens' Artwork (Maybe Text)

The name of the file to be used as album art. To determine which Amazon S3 bucket contains the specified file, Elastic Transcoder checks the pipeline specified by PipelineId ; the InputBucket object in that pipeline identifies the bucket. If the file name includes a prefix, for example, cooking/pie.jpg , include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.

aPaddingPolicy :: Lens' Artwork (Maybe Text)

When you set PaddingPolicy to Pad , Elastic Transcoder may add white bars to the top and bottom and/or left and right sides of the output album art to make the total size of the output art match the values that you specified for MaxWidth and MaxHeight .

aEncryption :: Lens' Artwork (Maybe Encryption)

The encryption settings, if any, that you want Elastic Transcoder to apply to your artwork.

aMaxWidth :: Lens' Artwork (Maybe Text)

The maximum width of the output album art in pixels. If you specify auto , Elastic Transcoder uses 600 as the default value. If you specify a numeric value, enter an even integer between 32 and 4096, inclusive.

AudioCodecOptions

data AudioCodecOptions

Options associated with your audio codec.

See: audioCodecOptions smart constructor.

Instances

Eq AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: AudioCodecOptions -> AudioCodecOptions -> Bool

(/=) :: AudioCodecOptions -> AudioCodecOptions -> Bool

Data AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> AudioCodecOptions -> c AudioCodecOptions

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c AudioCodecOptions

toConstr :: AudioCodecOptions -> Constr

dataTypeOf :: AudioCodecOptions -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c AudioCodecOptions)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c AudioCodecOptions)

gmapT :: (forall b. Data b => b -> b) -> AudioCodecOptions -> AudioCodecOptions

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> AudioCodecOptions -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> AudioCodecOptions -> r

gmapQ :: (forall d. Data d => d -> u) -> AudioCodecOptions -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> AudioCodecOptions -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> AudioCodecOptions -> m AudioCodecOptions

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> AudioCodecOptions -> m AudioCodecOptions

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> AudioCodecOptions -> m AudioCodecOptions

Read AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS AudioCodecOptions

readList :: ReadS [AudioCodecOptions]

readPrec :: ReadPrec AudioCodecOptions

readListPrec :: ReadPrec [AudioCodecOptions]

Show AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> AudioCodecOptions -> ShowS

show :: AudioCodecOptions -> String

showList :: [AudioCodecOptions] -> ShowS

Generic AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep AudioCodecOptions :: Type -> Type

Methods

from :: AudioCodecOptions -> Rep AudioCodecOptions x

to :: Rep AudioCodecOptions x -> AudioCodecOptions

Hashable AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> AudioCodecOptions -> Int

hash :: AudioCodecOptions -> Int

ToJSON AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: AudioCodecOptions -> Value

toEncoding :: AudioCodecOptions -> Encoding

toJSONList :: [AudioCodecOptions] -> Value

toEncodingList :: [AudioCodecOptions] -> Encoding

FromJSON AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser AudioCodecOptions

parseJSONList :: Value -> Parser [AudioCodecOptions]

NFData AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: AudioCodecOptions -> ()

type Rep AudioCodecOptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep AudioCodecOptions = D1 (MetaData "AudioCodecOptions" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "AudioCodecOptions'" PrefixI True) ((S1 (MetaSel (Just "_acoSigned") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_acoBitDepth") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_acoProfile") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_acoBitOrder") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))))

audioCodecOptions :: AudioCodecOptions

Creates a value of AudioCodecOptions with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• acoSigned - You can only choose whether an audio sample is signed when you specify pcm for the value of Audio:Codec. Whether audio samples are represented with negative and positive numbers (signed) or only positive numbers (unsigned). The supported value is Signed .
• acoBitDepth - You can only choose an audio bit depth when you specify flac or pcm for the value of Audio:Codec. The bit depth of a sample is how many bits of information are included in the audio samples. The higher the bit depth, the better the audio, but the larger the file. Valid values are 16 and 24 . The most common bit depth is 24 .
• acoProfile - You can only choose an audio profile when you specify AAC for the value of Audio:Codec. Specify the AAC profile for the output file. Elastic Transcoder supports the following profiles: * auto : If you specify auto , Elastic Transcoder selects the profile based on the bit rate selected for the output file. * AAC-LC : The most common AAC profile. Use for bit rates larger than 64 kbps. * HE-AAC : Not supported on some older players and devices. Use for bit rates between 40 and 80 kbps. * HE-AACv2 : Not supported on some players and devices. Use for bit rates less than 48 kbps. All outputs in a Smooth playlist must have the same value for Profile .
• acoBitOrder - You can only choose an audio bit order when you specify pcm for the value of Audio:Codec. The order the bits of a PCM sample are stored in. The supported value is LittleEndian .

acoSigned :: Lens' AudioCodecOptions (Maybe Text)

You can only choose whether an audio sample is signed when you specify pcm for the value of Audio:Codec. Whether audio samples are represented with negative and positive numbers (signed) or only positive numbers (unsigned). The supported value is Signed .

acoBitDepth :: Lens' AudioCodecOptions (Maybe Text)

You can only choose an audio bit depth when you specify flac or pcm for the value of Audio:Codec. The bit depth of a sample is how many bits of information are included in the audio samples. The higher the bit depth, the better the audio, but the larger the file. Valid values are 16 and 24 . The most common bit depth is 24 .

acoProfile :: Lens' AudioCodecOptions (Maybe Text)

You can only choose an audio profile when you specify AAC for the value of Audio:Codec. Specify the AAC profile for the output file. Elastic Transcoder supports the following profiles: * auto : If you specify auto , Elastic Transcoder selects the profile based on the bit rate selected for the output file. * AAC-LC : The most common AAC profile. Use for bit rates larger than 64 kbps. * HE-AAC : Not supported on some older players and devices. Use for bit rates between 40 and 80 kbps. * HE-AACv2 : Not supported on some players and devices. Use for bit rates less than 48 kbps. All outputs in a Smooth playlist must have the same value for Profile .

acoBitOrder :: Lens' AudioCodecOptions (Maybe Text)

You can only choose an audio bit order when you specify pcm for the value of Audio:Codec. The order the bits of a PCM sample are stored in. The supported value is LittleEndian .

AudioParameters

data AudioParameters

Parameters required for transcoding audio.

See: audioParameters smart constructor.

Instances

Eq AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: AudioParameters -> AudioParameters -> Bool

(/=) :: AudioParameters -> AudioParameters -> Bool

Data AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> AudioParameters -> c AudioParameters

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c AudioParameters

toConstr :: AudioParameters -> Constr

dataTypeOf :: AudioParameters -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c AudioParameters)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c AudioParameters)

gmapT :: (forall b. Data b => b -> b) -> AudioParameters -> AudioParameters

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> AudioParameters -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> AudioParameters -> r

gmapQ :: (forall d. Data d => d -> u) -> AudioParameters -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> AudioParameters -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> AudioParameters -> m AudioParameters

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> AudioParameters -> m AudioParameters

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> AudioParameters -> m AudioParameters

Read AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS AudioParameters

readList :: ReadS [AudioParameters]

readPrec :: ReadPrec AudioParameters

readListPrec :: ReadPrec [AudioParameters]

Show AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> AudioParameters -> ShowS

show :: AudioParameters -> String

showList :: [AudioParameters] -> ShowS

Generic AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep AudioParameters :: Type -> Type

Methods

from :: AudioParameters -> Rep AudioParameters x

to :: Rep AudioParameters x -> AudioParameters

Hashable AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> AudioParameters -> Int

hash :: AudioParameters -> Int

ToJSON AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: AudioParameters -> Value

toEncoding :: AudioParameters -> Encoding

toJSONList :: [AudioParameters] -> Value

toEncodingList :: [AudioParameters] -> Encoding

FromJSON AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser AudioParameters

parseJSONList :: Value -> Parser [AudioParameters]

NFData AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: AudioParameters -> ()

type Rep AudioParameters

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep AudioParameters = D1 (MetaData "AudioParameters" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "AudioParameters'" PrefixI True) ((S1 (MetaSel (Just "_apChannels") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_apCodec") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_apAudioPackingMode") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 (MetaSel (Just "_apSampleRate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_apBitRate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_apCodecOptions") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe AudioCodecOptions))))))

audioParameters :: AudioParameters

Creates a value of AudioParameters with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• apChannels - The number of audio channels in the output file. The following values are valid: auto , 0 , 1 , 2 One channel carries the information played by a single speaker. For example, a stereo track with two channels sends one channel to the left speaker, and the other channel to the right speaker. The output channels are organized into tracks. If you want Elastic Transcoder to automatically detect the number of audio channels in the input file and use that value for the output file, select auto . The output of a specific channel value and inputs are as follows: * auto channel specified, with any input: Pass through up to eight input channels. * 0 channels specified, with any input: Audio omitted from the output. * 1 channel specified, with at least one input channel: Mono sound. * 2 channels specified, with any input: Two identical mono channels or stereo. For more information about tracks, see Audio:AudioPackingMode. For more information about how Elastic Transcoder organizes channels and tracks, see Audio:AudioPackingMode .
• apCodec - The audio codec for the output file. Valid values include aac , flac , mp2 , mp3 , pcm , and vorbis .
• apAudioPackingMode - The method of organizing audio channels and tracks. Use Audio:Channels to specify the number of channels in your output, and Audio:AudioPackingMode to specify the number of tracks and their relation to the channels. If you do not specify an Audio:AudioPackingMode , Elastic Transcoder uses SingleTrack . The following values are valid: SingleTrack , OneChannelPerTrack , and OneChannelPerTrackWithMosTo8Tracks When you specify SingleTrack , Elastic Transcoder creates a single track for your output. The track can have up to eight channels. Use SingleTrack for all non-mxf containers. The outputs of SingleTrack for a specific channel value and inputs are as follows: * 0 channels with any input: Audio omitted from the output * 1, 2, or auto channels with no audio input: Audio omitted from the output * 1 channel with any input with audio: One track with one channel, downmixed if necessary * 2 channels with one track with one channel: One track with two identical channels * 2 or auto channels with two tracks with one channel each: One track with two channels * 2 or auto channels with one track with two channels: One track with two channels * 2 channels with one track with multiple channels: One track with two channels * auto channels with one track with one channel: One track with one channel * auto channels with one track with multiple channels: One track with multiple channels When you specify OneChannelPerTrack , Elastic Transcoder creates a new track for every channel in your output. Your output can have up to eight single-channel tracks. The outputs of OneChannelPerTrack for a specific channel value and inputs are as follows: * 0 channels with any input: Audio omitted from the output * 1, 2, or auto channels with no audio input: Audio omitted from the output * 1 channel with any input with audio: One track with one channel, downmixed if necessary * 2 channels with one track with one channel: Two tracks with one identical channel each * 2 or auto channels with two tracks with one channel each: Two tracks with one channel each * 2 or auto channels with one track with two channels: Two tracks with one channel each * 2 channels with one track with multiple channels: Two tracks with one channel each * auto channels with one track with one channel: One track with one channel * auto channels with one track with multiple channels: Up to eight tracks with one channel each When you specify OneChannelPerTrackWithMosTo8Tracks , Elastic Transcoder creates eight single-channel tracks for your output. All tracks that do not contain audio data from an input channel are MOS, or Mit Out Sound, tracks. The outputs of OneChannelPerTrackWithMosTo8Tracks for a specific channel value and inputs are as follows: * 0 channels with any input: Audio omitted from the output * 1, 2, or auto channels with no audio input: Audio omitted from the output * 1 channel with any input with audio: One track with one channel, downmixed if necessary, plus six MOS tracks * 2 channels with one track with one channel: Two tracks with one identical channel each, plus six MOS tracks * 2 or auto channels with two tracks with one channel each: Two tracks with one channel each, plus six MOS tracks * 2 or auto channels with one track with two channels: Two tracks with one channel each, plus six MOS tracks * 2 channels with one track with multiple channels: Two tracks with one channel each, plus six MOS tracks * auto channels with one track with one channel: One track with one channel, plus seven MOS tracks * auto channels with one track with multiple channels: Up to eight tracks with one channel each, plus MOS tracks until there are eight tracks in all
• apSampleRate - The sample rate of the audio stream in the output file, in Hertz. Valid values include: auto , 22050 , 32000 , 44100 , 48000 , 96000 If you specify auto , Elastic Transcoder automatically detects the sample rate.
• apBitRate - The bit rate of the audio stream in the output file, in kilobits/second. Enter an integer between 64 and 320, inclusive.
• apCodecOptions - If you specified AAC for Audio:Codec , this is the AAC compression profile to use. Valid values include: auto , AAC-LC , HE-AAC , HE-AACv2 If you specify auto , Elastic Transcoder chooses a profile based on the bit rate of the output file.

apChannels :: Lens' AudioParameters (Maybe Text)

The number of audio channels in the output file. The following values are valid: auto , 0 , 1 , 2 One channel carries the information played by a single speaker. For example, a stereo track with two channels sends one channel to the left speaker, and the other channel to the right speaker. The output channels are organized into tracks. If you want Elastic Transcoder to automatically detect the number of audio channels in the input file and use that value for the output file, select auto . The output of a specific channel value and inputs are as follows: * auto channel specified, with any input: Pass through up to eight input channels. * 0 channels specified, with any input: Audio omitted from the output. * 1 channel specified, with at least one input channel: Mono sound. * 2 channels specified, with any input: Two identical mono channels or stereo. For more information about tracks, see Audio:AudioPackingMode. For more information about how Elastic Transcoder organizes channels and tracks, see Audio:AudioPackingMode .

apCodec :: Lens' AudioParameters (Maybe Text)

The audio codec for the output file. Valid values include aac , flac , mp2 , mp3 , pcm , and vorbis .

apAudioPackingMode :: Lens' AudioParameters (Maybe Text)

The method of organizing audio channels and tracks. Use Audio:Channels to specify the number of channels in your output, and Audio:AudioPackingMode to specify the number of tracks and their relation to the channels. If you do not specify an Audio:AudioPackingMode , Elastic Transcoder uses SingleTrack . The following values are valid: SingleTrack , OneChannelPerTrack , and OneChannelPerTrackWithMosTo8Tracks When you specify SingleTrack , Elastic Transcoder creates a single track for your output. The track can have up to eight channels. Use SingleTrack for all non-mxf containers. The outputs of SingleTrack for a specific channel value and inputs are as follows: * 0 channels with any input: Audio omitted from the output * 1, 2, or auto channels with no audio input: Audio omitted from the output * 1 channel with any input with audio: One track with one channel, downmixed if necessary * 2 channels with one track with one channel: One track with two identical channels * 2 or auto channels with two tracks with one channel each: One track with two channels * 2 or auto channels with one track with two channels: One track with two channels * 2 channels with one track with multiple channels: One track with two channels * auto channels with one track with one channel: One track with one channel * auto channels with one track with multiple channels: One track with multiple channels When you specify OneChannelPerTrack , Elastic Transcoder creates a new track for every channel in your output. Your output can have up to eight single-channel tracks. The outputs of OneChannelPerTrack for a specific channel value and inputs are as follows: * 0 channels with any input: Audio omitted from the output * 1, 2, or auto channels with no audio input: Audio omitted from the output * 1 channel with any input with audio: One track with one channel, downmixed if necessary * 2 channels with one track with one channel: Two tracks with one identical channel each * 2 or auto channels with two tracks with one channel each: Two tracks with one channel each * 2 or auto channels with one track with two channels: Two tracks with one channel each * 2 channels with one track with multiple channels: Two tracks with one channel each * auto channels with one track with one channel: One track with one channel * auto channels with one track with multiple channels: Up to eight tracks with one channel each When you specify OneChannelPerTrackWithMosTo8Tracks , Elastic Transcoder creates eight single-channel tracks for your output. All tracks that do not contain audio data from an input channel are MOS, or Mit Out Sound, tracks. The outputs of OneChannelPerTrackWithMosTo8Tracks for a specific channel value and inputs are as follows: * 0 channels with any input: Audio omitted from the output * 1, 2, or auto channels with no audio input: Audio omitted from the output * 1 channel with any input with audio: One track with one channel, downmixed if necessary, plus six MOS tracks * 2 channels with one track with one channel: Two tracks with one identical channel each, plus six MOS tracks * 2 or auto channels with two tracks with one channel each: Two tracks with one channel each, plus six MOS tracks * 2 or auto channels with one track with two channels: Two tracks with one channel each, plus six MOS tracks * 2 channels with one track with multiple channels: Two tracks with one channel each, plus six MOS tracks * auto channels with one track with one channel: One track with one channel, plus seven MOS tracks * auto channels with one track with multiple channels: Up to eight tracks with one channel each, plus MOS tracks until there are eight tracks in all

apSampleRate :: Lens' AudioParameters (Maybe Text)

The sample rate of the audio stream in the output file, in Hertz. Valid values include: auto , 22050 , 32000 , 44100 , 48000 , 96000 If you specify auto , Elastic Transcoder automatically detects the sample rate.

apBitRate :: Lens' AudioParameters (Maybe Text)

The bit rate of the audio stream in the output file, in kilobits/second. Enter an integer between 64 and 320, inclusive.

apCodecOptions :: Lens' AudioParameters (Maybe AudioCodecOptions)

If you specified AAC for Audio:Codec , this is the AAC compression profile to use. Valid values include: auto , AAC-LC , HE-AAC , HE-AACv2 If you specify auto , Elastic Transcoder chooses a profile based on the bit rate of the output file.

CaptionFormat

data CaptionFormat

The file format of the output captions. If you leave this value blank, Elastic Transcoder returns an error.

See: captionFormat smart constructor.

Instances

Eq CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: CaptionFormat -> CaptionFormat -> Bool

(/=) :: CaptionFormat -> CaptionFormat -> Bool

Data CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CaptionFormat -> c CaptionFormat

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CaptionFormat

toConstr :: CaptionFormat -> Constr

dataTypeOf :: CaptionFormat -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c CaptionFormat)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CaptionFormat)

gmapT :: (forall b. Data b => b -> b) -> CaptionFormat -> CaptionFormat

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CaptionFormat -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CaptionFormat -> r

gmapQ :: (forall d. Data d => d -> u) -> CaptionFormat -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CaptionFormat -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CaptionFormat -> m CaptionFormat

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CaptionFormat -> m CaptionFormat

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CaptionFormat -> m CaptionFormat

Read CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS CaptionFormat

readList :: ReadS [CaptionFormat]

readPrec :: ReadPrec CaptionFormat

readListPrec :: ReadPrec [CaptionFormat]

Show CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> CaptionFormat -> ShowS

show :: CaptionFormat -> String

showList :: [CaptionFormat] -> ShowS

Generic CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep CaptionFormat :: Type -> Type

Methods

from :: CaptionFormat -> Rep CaptionFormat x

to :: Rep CaptionFormat x -> CaptionFormat

Hashable CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> CaptionFormat -> Int

hash :: CaptionFormat -> Int

ToJSON CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: CaptionFormat -> Value

toEncoding :: CaptionFormat -> Encoding

toJSONList :: [CaptionFormat] -> Value

toEncodingList :: [CaptionFormat] -> Encoding

FromJSON CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser CaptionFormat

parseJSONList :: Value -> Parser [CaptionFormat]

NFData CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: CaptionFormat -> ()

type Rep CaptionFormat

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep CaptionFormat = D1 (MetaData "CaptionFormat" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "CaptionFormat'" PrefixI True) (S1 (MetaSel (Just "_cfPattern") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_cfFormat") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_cfEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption)))))

captionFormat :: CaptionFormat

Creates a value of CaptionFormat with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cfPattern - The prefix for caption filenames, in the form description -{language} , where: * description is a description of the video. * {language} is a literal value that Elastic Transcoder replaces with the two- or three-letter code for the language of the caption in the output file names. If you don't include {language} in the file name pattern, Elastic Transcoder automatically appends "{language} " to the value that you specify for the description. In addition, Elastic Transcoder automatically appends the count to the end of the segment files. For example, suppose you're transcoding into srt format. When you enter "Sydney-{language}-sunrise", and the language of the captions is English (en), the name of the first caption file is be Sydney-en-sunrise00000.srt.
• cfFormat - The format you specify determines whether Elastic Transcoder generates an embedded or sidecar caption for this output. * Valid Embedded Caption Formats: * for FLAC : None * For MP3 : None * For MP4 : mov-text * For MPEG-TS : None * For ogg : None * For webm : None * Valid Sidecar Caption Formats: Elastic Transcoder supports dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. * For FMP4 : dfxp * Non-FMP4 outputs : All sidecar types fmp4 captions have an extension of .ismt
• cfEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your caption formats.

cfPattern :: Lens' CaptionFormat (Maybe Text)

The prefix for caption filenames, in the form description -{language} , where: * description is a description of the video. * {language} is a literal value that Elastic Transcoder replaces with the two- or three-letter code for the language of the caption in the output file names. If you don't include {language} in the file name pattern, Elastic Transcoder automatically appends "{language} " to the value that you specify for the description. In addition, Elastic Transcoder automatically appends the count to the end of the segment files. For example, suppose you're transcoding into srt format. When you enter "Sydney-{language}-sunrise", and the language of the captions is English (en), the name of the first caption file is be Sydney-en-sunrise00000.srt.

cfFormat :: Lens' CaptionFormat (Maybe Text)

The format you specify determines whether Elastic Transcoder generates an embedded or sidecar caption for this output. * Valid Embedded Caption Formats: * for FLAC : None * For MP3 : None * For MP4 : mov-text * For MPEG-TS : None * For ogg : None * For webm : None * Valid Sidecar Caption Formats: Elastic Transcoder supports dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. * For FMP4 : dfxp * Non-FMP4 outputs : All sidecar types fmp4 captions have an extension of .ismt

cfEncryption :: Lens' CaptionFormat (Maybe Encryption)

The encryption settings, if any, that you want Elastic Transcoder to apply to your caption formats.

CaptionSource

data CaptionSource

A source file for the input sidecar captions used during the transcoding process.

See: captionSource smart constructor.

Instances

Eq CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: CaptionSource -> CaptionSource -> Bool

(/=) :: CaptionSource -> CaptionSource -> Bool

Data CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CaptionSource -> c CaptionSource

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CaptionSource

toConstr :: CaptionSource -> Constr

dataTypeOf :: CaptionSource -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c CaptionSource)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CaptionSource)

gmapT :: (forall b. Data b => b -> b) -> CaptionSource -> CaptionSource

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CaptionSource -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CaptionSource -> r

gmapQ :: (forall d. Data d => d -> u) -> CaptionSource -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CaptionSource -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CaptionSource -> m CaptionSource

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CaptionSource -> m CaptionSource

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CaptionSource -> m CaptionSource

Read CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS CaptionSource

readList :: ReadS [CaptionSource]

readPrec :: ReadPrec CaptionSource

readListPrec :: ReadPrec [CaptionSource]

Show CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> CaptionSource -> ShowS

show :: CaptionSource -> String

showList :: [CaptionSource] -> ShowS

Generic CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep CaptionSource :: Type -> Type

Methods

from :: CaptionSource -> Rep CaptionSource x

to :: Rep CaptionSource x -> CaptionSource

Hashable CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> CaptionSource -> Int

hash :: CaptionSource -> Int

ToJSON CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: CaptionSource -> Value

toEncoding :: CaptionSource -> Encoding

toJSONList :: [CaptionSource] -> Value

toEncodingList :: [CaptionSource] -> Encoding

FromJSON CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser CaptionSource

parseJSONList :: Value -> Parser [CaptionSource]

NFData CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: CaptionSource -> ()

type Rep CaptionSource

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep CaptionSource = D1 (MetaData "CaptionSource" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "CaptionSource'" PrefixI True) ((S1 (MetaSel (Just "_csTimeOffset") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_csEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption))) :*: (S1 (MetaSel (Just "_csKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_csLanguage") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_csLabel") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))))

captionSource :: CaptionSource

Creates a value of CaptionSource with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• csTimeOffset - For clip generation or captions that do not start at the same time as the associated video file, the TimeOffset tells Elastic Transcoder how much of the video to encode before including captions. Specify the TimeOffset in the form [+-]SS.sss or [+-]HH:mm:SS.ss.
• csEncryption - The encryption settings, if any, that Elastic Transcoder needs to decyrpt your caption sources, or that you want Elastic Transcoder to apply to your caption sources.
• csKey - The name of the sidecar caption file that you want Elastic Transcoder to include in the output file.
• csLanguage - A string that specifies the language of the caption. If you specified multiple inputs with captions, the caption language must match in order to be included in the output. Specify this as one of: * 2-character ISO 639-1 code * 3-character ISO 639-2 code For more information on ISO language codes and language names, see the List of ISO 639-1 codes.
• csLabel - The label of the caption shown in the player when choosing a language. We recommend that you put the caption language name here, in the language of the captions.

csTimeOffset :: Lens' CaptionSource (Maybe Text)

For clip generation or captions that do not start at the same time as the associated video file, the TimeOffset tells Elastic Transcoder how much of the video to encode before including captions. Specify the TimeOffset in the form [+-]SS.sss or [+-]HH:mm:SS.ss.

csEncryption :: Lens' CaptionSource (Maybe Encryption)

The encryption settings, if any, that Elastic Transcoder needs to decyrpt your caption sources, or that you want Elastic Transcoder to apply to your caption sources.

csKey :: Lens' CaptionSource (Maybe Text)

The name of the sidecar caption file that you want Elastic Transcoder to include in the output file.

csLanguage :: Lens' CaptionSource (Maybe Text)

A string that specifies the language of the caption. If you specified multiple inputs with captions, the caption language must match in order to be included in the output. Specify this as one of: * 2-character ISO 639-1 code * 3-character ISO 639-2 code For more information on ISO language codes and language names, see the List of ISO 639-1 codes.

csLabel :: Lens' CaptionSource (Maybe Text)

The label of the caption shown in the player when choosing a language. We recommend that you put the caption language name here, in the language of the captions.

Captions

data Captions

The captions to be created, if any.

See: captions smart constructor.

Instances

Eq Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Captions -> Captions -> Bool

(/=) :: Captions -> Captions -> Bool

Data Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Captions -> c Captions

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Captions

toConstr :: Captions -> Constr

dataTypeOf :: Captions -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Captions)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Captions)

gmapT :: (forall b. Data b => b -> b) -> Captions -> Captions

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Captions -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Captions -> r

gmapQ :: (forall d. Data d => d -> u) -> Captions -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Captions -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Captions -> m Captions

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Captions -> m Captions

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Captions -> m Captions

Read Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Captions

readList :: ReadS [Captions]

readPrec :: ReadPrec Captions

readListPrec :: ReadPrec [Captions]

Show Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Captions -> ShowS

show :: Captions -> String

showList :: [Captions] -> ShowS

Generic Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Captions :: Type -> Type

Methods

from :: Captions -> Rep Captions x

to :: Rep Captions x -> Captions

Hashable Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Captions -> Int

hash :: Captions -> Int

ToJSON Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: Captions -> Value

toEncoding :: Captions -> Encoding

toJSONList :: [Captions] -> Value

toEncodingList :: [Captions] -> Encoding

FromJSON Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Captions

parseJSONList :: Value -> Parser [Captions]

NFData Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Captions -> ()

type Rep Captions

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Captions = D1 (MetaData "Captions" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "Captions'" PrefixI True) (S1 (MetaSel (Just "_cMergePolicy") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_cCaptionSources") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [CaptionSource])) :*: S1 (MetaSel (Just "_cCaptionFormats") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [CaptionFormat])))))

captions :: Captions

Creates a value of Captions with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cMergePolicy - A policy that determines how Elastic Transcoder handles the existence of multiple captions. * MergeOverride: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the sidecar captions and ignores the embedded captions for that language. * MergeRetain: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the embedded captions and ignores the sidecar captions for that language. If CaptionSources is empty, Elastic Transcoder omits all sidecar captions from the output files. * Override: Elastic Transcoder transcodes only the sidecar captions that you specify in CaptionSources . MergePolicy cannot be null.
• cCaptionSources - Source files for the input sidecar captions used during the transcoding process. To omit all sidecar captions, leave CaptionSources blank.
• cCaptionFormats - The array of file formats for the output captions. If you leave this value blank, Elastic Transcoder returns an error.

cMergePolicy :: Lens' Captions (Maybe Text)

A policy that determines how Elastic Transcoder handles the existence of multiple captions. * MergeOverride: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the sidecar captions and ignores the embedded captions for that language. * MergeRetain: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the embedded captions and ignores the sidecar captions for that language. If CaptionSources is empty, Elastic Transcoder omits all sidecar captions from the output files. * Override: Elastic Transcoder transcodes only the sidecar captions that you specify in CaptionSources . MergePolicy cannot be null.

cCaptionSources :: Lens' Captions [CaptionSource]

Source files for the input sidecar captions used during the transcoding process. To omit all sidecar captions, leave CaptionSources blank.

cCaptionFormats :: Lens' Captions [CaptionFormat]

The array of file formats for the output captions. If you leave this value blank, Elastic Transcoder returns an error.

Clip

data Clip

Settings for one clip in a composition. All jobs in a playlist must have the same clip settings.

See: clip smart constructor.

Instances

Eq Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Clip -> Clip -> Bool

(/=) :: Clip -> Clip -> Bool

Data Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Clip -> c Clip

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Clip

toConstr :: Clip -> Constr

dataTypeOf :: Clip -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Clip)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Clip)

gmapT :: (forall b. Data b => b -> b) -> Clip -> Clip

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Clip -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Clip -> r

gmapQ :: (forall d. Data d => d -> u) -> Clip -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Clip -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Clip -> m Clip

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Clip -> m Clip

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Clip -> m Clip

Read Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Clip

readList :: ReadS [Clip]

readPrec :: ReadPrec Clip

readListPrec :: ReadPrec [Clip]

Show Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Clip -> ShowS

show :: Clip -> String

showList :: [Clip] -> ShowS

Generic Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Clip :: Type -> Type

Methods

from :: Clip -> Rep Clip x

to :: Rep Clip x -> Clip

Hashable Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Clip -> Int

hash :: Clip -> Int

ToJSON Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: Clip -> Value

toEncoding :: Clip -> Encoding

toJSONList :: [Clip] -> Value

toEncodingList :: [Clip] -> Encoding

FromJSON Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Clip

parseJSONList :: Value -> Parser [Clip]

NFData Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Clip -> ()

type Rep Clip

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Clip = D1 (MetaData "Clip" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" True) (C1 (MetaCons "Clip'" PrefixI True) (S1 (MetaSel (Just "_cTimeSpan") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 (Maybe TimeSpan))))

clip :: Clip

Creates a value of Clip with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cTimeSpan - Settings that determine when a clip begins and how long it lasts.

cTimeSpan :: Lens' Clip (Maybe TimeSpan)

Settings that determine when a clip begins and how long it lasts.

CreateJobOutput

data CreateJobOutput

The CreateJobOutput structure.

See: createJobOutput smart constructor.

Instances

Eq CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: CreateJobOutput -> CreateJobOutput -> Bool

(/=) :: CreateJobOutput -> CreateJobOutput -> Bool

Data CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CreateJobOutput -> c CreateJobOutput

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CreateJobOutput

toConstr :: CreateJobOutput -> Constr

dataTypeOf :: CreateJobOutput -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c CreateJobOutput)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CreateJobOutput)

gmapT :: (forall b. Data b => b -> b) -> CreateJobOutput -> CreateJobOutput

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CreateJobOutput -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CreateJobOutput -> r

gmapQ :: (forall d. Data d => d -> u) -> CreateJobOutput -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CreateJobOutput -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CreateJobOutput -> m CreateJobOutput

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateJobOutput -> m CreateJobOutput

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateJobOutput -> m CreateJobOutput

Read CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS CreateJobOutput

readList :: ReadS [CreateJobOutput]

readPrec :: ReadPrec CreateJobOutput

readListPrec :: ReadPrec [CreateJobOutput]

Show CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> CreateJobOutput -> ShowS

show :: CreateJobOutput -> String

showList :: [CreateJobOutput] -> ShowS

Generic CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep CreateJobOutput :: Type -> Type

Methods

from :: CreateJobOutput -> Rep CreateJobOutput x

to :: Rep CreateJobOutput x -> CreateJobOutput

Hashable CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> CreateJobOutput -> Int

hash :: CreateJobOutput -> Int

ToJSON CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: CreateJobOutput -> Value

toEncoding :: CreateJobOutput -> Encoding

toJSONList :: [CreateJobOutput] -> Value

toEncodingList :: [CreateJobOutput] -> Encoding

NFData CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: CreateJobOutput -> ()

type Rep CreateJobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep CreateJobOutput = D1 (MetaData "CreateJobOutput" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "CreateJobOutput'" PrefixI True) (((S1 (MetaSel (Just "_cjoThumbnailPattern") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_cjoCaptions") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Captions))) :*: (S1 (MetaSel (Just "_cjoPresetId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_cjoComposition") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [Clip])) :*: S1 (MetaSel (Just "_cjoAlbumArt") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe JobAlbumArt))))) :*: ((S1 (MetaSel (Just "_cjoWatermarks") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [JobWatermark])) :*: (S1 (MetaSel (Just "_cjoEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption)) :*: S1 (MetaSel (Just "_cjoKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 (MetaSel (Just "_cjoSegmentDuration") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_cjoThumbnailEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption)) :*: S1 (MetaSel (Just "_cjoRotate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))))))

createJobOutput :: CreateJobOutput

Creates a value of CreateJobOutput with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cjoThumbnailPattern - Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files. If you don't want Elastic Transcoder to create thumbnails, specify "". If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence: * {count} (Required) : If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count} , Elastic Transcoder adds a five-digit sequence number (beginning with 00001 ) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file. Important: If you specify a literal value and/or {resolution} but you omit {count} , Elastic Transcoder returns a validation error and does not create the job. * Literal values (Optional) : You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count} . * {resolution} (Optional) : If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object. When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput . Elastic Transcoder also appends the applicable file name extension.
• cjoCaptions - You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: * Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. * Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc , srt , and webvtt . If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain , and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.
• cjoPresetId - The Id of the preset to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding.
• cjoComposition - You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.
• cjoAlbumArt - Information about the album art that you want Elastic Transcoder to add to the file during transcoding. You can specify up to twenty album artworks for each output. Settings for each artwork must be defined in the job for the current output.
• cjoWatermarks - Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset for the current output.
• cjoEncryption - You can specify encryption settings for any output files that you want to use for a transcoding job. This includes the output file and any watermarks, thumbnails, album art, or captions that you want to use. You must specify encryption settings for each file individually.
• cjoKey - The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID. If a file with the specified name already exists in the output bucket, the job fails.
• cjoSegmentDuration - Important: (Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration , though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration , the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist.
• cjoThumbnailEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
• cjoRotate - The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values: auto , 0 , 90 , 180 , 270 . The value auto generally works only if the file that you're transcoding contains rotation metadata.

cjoThumbnailPattern :: Lens' CreateJobOutput (Maybe Text)

Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files. If you don't want Elastic Transcoder to create thumbnails, specify "". If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence: * {count} (Required) : If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count} , Elastic Transcoder adds a five-digit sequence number (beginning with 00001 ) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file. Important: If you specify a literal value and/or {resolution} but you omit {count} , Elastic Transcoder returns a validation error and does not create the job. * Literal values (Optional) : You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count} . * {resolution} (Optional) : If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object. When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput . Elastic Transcoder also appends the applicable file name extension.

cjoCaptions :: Lens' CreateJobOutput (Maybe Captions)

You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: * Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. * Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc , srt , and webvtt . If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain , and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.

cjoPresetId :: Lens' CreateJobOutput (Maybe Text)

The Id of the preset to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding.

cjoComposition :: Lens' CreateJobOutput [Clip]

You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.

cjoAlbumArt :: Lens' CreateJobOutput (Maybe JobAlbumArt)

Information about the album art that you want Elastic Transcoder to add to the file during transcoding. You can specify up to twenty album artworks for each output. Settings for each artwork must be defined in the job for the current output.

cjoWatermarks :: Lens' CreateJobOutput [JobWatermark]

Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset for the current output.

cjoEncryption :: Lens' CreateJobOutput (Maybe Encryption)

You can specify encryption settings for any output files that you want to use for a transcoding job. This includes the output file and any watermarks, thumbnails, album art, or captions that you want to use. You must specify encryption settings for each file individually.

cjoKey :: Lens' CreateJobOutput (Maybe Text)

The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID. If a file with the specified name already exists in the output bucket, the job fails.

cjoSegmentDuration :: Lens' CreateJobOutput (Maybe Text)

Important: (Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration , though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration , the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist.

cjoThumbnailEncryption :: Lens' CreateJobOutput (Maybe Encryption)

The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.

cjoRotate :: Lens' CreateJobOutput (Maybe Text)

The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values: auto , 0 , 90 , 180 , 270 . The value auto generally works only if the file that you're transcoding contains rotation metadata.

CreateJobPlaylist

data CreateJobPlaylist

Information about the master playlist.

See: createJobPlaylist smart constructor.

Instances

Eq CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: CreateJobPlaylist -> CreateJobPlaylist -> Bool

(/=) :: CreateJobPlaylist -> CreateJobPlaylist -> Bool

Data CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CreateJobPlaylist -> c CreateJobPlaylist

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CreateJobPlaylist

toConstr :: CreateJobPlaylist -> Constr

dataTypeOf :: CreateJobPlaylist -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c CreateJobPlaylist)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CreateJobPlaylist)

gmapT :: (forall b. Data b => b -> b) -> CreateJobPlaylist -> CreateJobPlaylist

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CreateJobPlaylist -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CreateJobPlaylist -> r

gmapQ :: (forall d. Data d => d -> u) -> CreateJobPlaylist -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CreateJobPlaylist -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CreateJobPlaylist -> m CreateJobPlaylist

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateJobPlaylist -> m CreateJobPlaylist

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateJobPlaylist -> m CreateJobPlaylist

Read CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS CreateJobPlaylist

readList :: ReadS [CreateJobPlaylist]

readPrec :: ReadPrec CreateJobPlaylist

readListPrec :: ReadPrec [CreateJobPlaylist]

Show CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> CreateJobPlaylist -> ShowS

show :: CreateJobPlaylist -> String

showList :: [CreateJobPlaylist] -> ShowS

Generic CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep CreateJobPlaylist :: Type -> Type

Methods

from :: CreateJobPlaylist -> Rep CreateJobPlaylist x

to :: Rep CreateJobPlaylist x -> CreateJobPlaylist

Hashable CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> CreateJobPlaylist -> Int

hash :: CreateJobPlaylist -> Int

ToJSON CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: CreateJobPlaylist -> Value

toEncoding :: CreateJobPlaylist -> Encoding

toJSONList :: [CreateJobPlaylist] -> Value

toEncodingList :: [CreateJobPlaylist] -> Encoding

NFData CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: CreateJobPlaylist -> ()

type Rep CreateJobPlaylist

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep CreateJobPlaylist = D1 (MetaData "CreateJobPlaylist" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "CreateJobPlaylist'" PrefixI True) ((S1 (MetaSel (Just "_cjpPlayReadyDrm") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe PlayReadyDrm)) :*: S1 (MetaSel (Just "_cjpFormat") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_cjpOutputKeys") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [Text])) :*: (S1 (MetaSel (Just "_cjpName") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_cjpHlsContentProtection") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe HlsContentProtection))))))

createJobPlaylist :: CreateJobPlaylist

Creates a value of CreateJobPlaylist with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cjpPlayReadyDrm - The DRM settings, if any, that you want Elastic Transcoder to apply to the output files associated with this playlist.
• cjpFormat - The format of the output playlist. Valid formats include HLSv3 , HLSv4 , and Smooth .
• cjpOutputKeys - For each output in this job that you want to include in a master playlist, the value of the Outputs:Key object. * If your output is not HLS or does not have a segment duration set, the name of the output file is a concatenation of OutputKeyPrefix and Outputs:Key : OutputKeyPrefixOutputs:Key * If your output is HLSv3 and has a segment duration set, or is not included in a playlist, Elastic Transcoder creates an output playlist file with a file extension of .m3u8 , and a series of .ts files that include a five-digit sequential counter beginning with 00000: OutputKeyPrefixOutputs:Key .m3u8 OutputKeyPrefixOutputs:Key 00000.ts * If your output is HLSv4 , has a segment duration set, and is included in an HLSv4 playlist, Elastic Transcoder creates an output playlist file with a file extension of _v4.m3u8 . If the output is video, Elastic Transcoder also creates an output file with an extension of _iframe.m3u8 : OutputKeyPrefixOutputs:Key _v4.m3u8 OutputKeyPrefixOutputs:Key _iframe.m3u8 OutputKeyPrefixOutputs:Key .ts Elastic Transcoder automatically appends the relevant file extension to the file name. If you include a file extension in Output Key, the file name will have two extensions. If you include more than one output in a playlist, any segment duration settings, clip settings, or caption settings must be the same for all outputs in the playlist. For Smooth playlists, the Audio:Profile , Video:Profile , and Video:FrameRate to Video:KeyframesMaxDist ratio must be the same for all outputs.
• cjpName - The name that you want Elastic Transcoder to assign to the master playlist, for example, nyc-vacation.m3u8. If the name includes a / character, the section of the name before the last / must be identical for all Name objects. If you create more than one master playlist, the values of all Name objects must be unique.
• cjpHlsContentProtection - The HLS content protection settings, if any, that you want Elastic Transcoder to apply to the output files associated with this playlist.

cjpPlayReadyDrm :: Lens' CreateJobPlaylist (Maybe PlayReadyDrm)

The DRM settings, if any, that you want Elastic Transcoder to apply to the output files associated with this playlist.

cjpFormat :: Lens' CreateJobPlaylist (Maybe Text)

The format of the output playlist. Valid formats include HLSv3 , HLSv4 , and Smooth .

cjpOutputKeys :: Lens' CreateJobPlaylist [Text]

For each output in this job that you want to include in a master playlist, the value of the Outputs:Key object. * If your output is not HLS or does not have a segment duration set, the name of the output file is a concatenation of OutputKeyPrefix and Outputs:Key : OutputKeyPrefixOutputs:Key * If your output is HLSv3 and has a segment duration set, or is not included in a playlist, Elastic Transcoder creates an output playlist file with a file extension of .m3u8 , and a series of .ts files that include a five-digit sequential counter beginning with 00000: OutputKeyPrefixOutputs:Key .m3u8 OutputKeyPrefixOutputs:Key 00000.ts * If your output is HLSv4 , has a segment duration set, and is included in an HLSv4 playlist, Elastic Transcoder creates an output playlist file with a file extension of _v4.m3u8 . If the output is video, Elastic Transcoder also creates an output file with an extension of _iframe.m3u8 : OutputKeyPrefixOutputs:Key _v4.m3u8 OutputKeyPrefixOutputs:Key _iframe.m3u8 OutputKeyPrefixOutputs:Key .ts Elastic Transcoder automatically appends the relevant file extension to the file name. If you include a file extension in Output Key, the file name will have two extensions. If you include more than one output in a playlist, any segment duration settings, clip settings, or caption settings must be the same for all outputs in the playlist. For Smooth playlists, the Audio:Profile , Video:Profile , and Video:FrameRate to Video:KeyframesMaxDist ratio must be the same for all outputs.

cjpName :: Lens' CreateJobPlaylist (Maybe Text)

The name that you want Elastic Transcoder to assign to the master playlist, for example, nyc-vacation.m3u8. If the name includes a / character, the section of the name before the last / must be identical for all Name objects. If you create more than one master playlist, the values of all Name objects must be unique.

cjpHlsContentProtection :: Lens' CreateJobPlaylist (Maybe HlsContentProtection)

The HLS content protection settings, if any, that you want Elastic Transcoder to apply to the output files associated with this playlist.

DetectedProperties

data DetectedProperties

The detected properties of the input file. Elastic Transcoder identifies these values from the input file.

See: detectedProperties smart constructor.

Instances

Eq DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: DetectedProperties -> DetectedProperties -> Bool

(/=) :: DetectedProperties -> DetectedProperties -> Bool

Data DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> DetectedProperties -> c DetectedProperties

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c DetectedProperties

toConstr :: DetectedProperties -> Constr

dataTypeOf :: DetectedProperties -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c DetectedProperties)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c DetectedProperties)

gmapT :: (forall b. Data b => b -> b) -> DetectedProperties -> DetectedProperties

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> DetectedProperties -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> DetectedProperties -> r

gmapQ :: (forall d. Data d => d -> u) -> DetectedProperties -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> DetectedProperties -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> DetectedProperties -> m DetectedProperties

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> DetectedProperties -> m DetectedProperties

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> DetectedProperties -> m DetectedProperties

Read DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS DetectedProperties

readList :: ReadS [DetectedProperties]

readPrec :: ReadPrec DetectedProperties

readListPrec :: ReadPrec [DetectedProperties]

Show DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> DetectedProperties -> ShowS

show :: DetectedProperties -> String

showList :: [DetectedProperties] -> ShowS

Generic DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep DetectedProperties :: Type -> Type

Methods

from :: DetectedProperties -> Rep DetectedProperties x

to :: Rep DetectedProperties x -> DetectedProperties

Hashable DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> DetectedProperties -> Int

hash :: DetectedProperties -> Int

ToJSON DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: DetectedProperties -> Value

toEncoding :: DetectedProperties -> Encoding

toJSONList :: [DetectedProperties] -> Value

toEncodingList :: [DetectedProperties] -> Encoding

FromJSON DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser DetectedProperties

parseJSONList :: Value -> Parser [DetectedProperties]

NFData DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: DetectedProperties -> ()

type Rep DetectedProperties

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep DetectedProperties = D1 (MetaData "DetectedProperties" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "DetectedProperties'" PrefixI True) ((S1 (MetaSel (Just "_dpHeight") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Int)) :*: S1 (MetaSel (Just "_dpFrameRate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_dpFileSize") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Integer)) :*: (S1 (MetaSel (Just "_dpWidth") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Int)) :*: S1 (MetaSel (Just "_dpDurationMillis") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Integer))))))

detectedProperties :: DetectedProperties

Creates a value of DetectedProperties with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• dpHeight - The detected height of the input file, in pixels.
• dpFrameRate - The detected frame rate of the input file, in frames per second.
• dpFileSize - The detected file size of the input file, in bytes.
• dpWidth - The detected width of the input file, in pixels.
• dpDurationMillis - The detected duration of the input file, in milliseconds.

dpHeight :: Lens' DetectedProperties (Maybe Int)

The detected height of the input file, in pixels.

dpFrameRate :: Lens' DetectedProperties (Maybe Text)

The detected frame rate of the input file, in frames per second.

dpFileSize :: Lens' DetectedProperties (Maybe Integer)

The detected file size of the input file, in bytes.

dpWidth :: Lens' DetectedProperties (Maybe Int)

The detected width of the input file, in pixels.

dpDurationMillis :: Lens' DetectedProperties (Maybe Integer)

The detected duration of the input file, in milliseconds.

Encryption

data Encryption

The encryption settings, if any, that are used for decrypting your input files or encrypting your output files. If your input file is encrypted, you must specify the mode that Elastic Transcoder uses to decrypt your file, otherwise you must specify the mode you want Elastic Transcoder to use to encrypt your output files.

See: encryption smart constructor.

Instances

Eq Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Encryption -> Encryption -> Bool

(/=) :: Encryption -> Encryption -> Bool

Data Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Encryption -> c Encryption

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Encryption

toConstr :: Encryption -> Constr

dataTypeOf :: Encryption -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Encryption)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Encryption)

gmapT :: (forall b. Data b => b -> b) -> Encryption -> Encryption

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Encryption -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Encryption -> r

gmapQ :: (forall d. Data d => d -> u) -> Encryption -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Encryption -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Encryption -> m Encryption

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Encryption -> m Encryption

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Encryption -> m Encryption

Read Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Encryption

readList :: ReadS [Encryption]

readPrec :: ReadPrec Encryption

readListPrec :: ReadPrec [Encryption]

Show Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Encryption -> ShowS

show :: Encryption -> String

showList :: [Encryption] -> ShowS

Generic Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Encryption :: Type -> Type

Methods

from :: Encryption -> Rep Encryption x

to :: Rep Encryption x -> Encryption

Hashable Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Encryption -> Int

hash :: Encryption -> Int

ToJSON Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: Encryption -> Value

toEncoding :: Encryption -> Encoding

toJSONList :: [Encryption] -> Value

toEncodingList :: [Encryption] -> Encoding

FromJSON Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Encryption

parseJSONList :: Value -> Parser [Encryption]

NFData Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Encryption -> ()

type Rep Encryption

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Encryption = D1 (MetaData "Encryption" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "Encryption'" PrefixI True) ((S1 (MetaSel (Just "_eMode") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_eKeyMD5") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_eKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_eInitializationVector") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))))

encryption :: Encryption

Creates a value of Encryption with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• eMode - The specific server-side encryption mode that you want Elastic Transcoder to use when decrypting your input files or encrypting your output files. Elastic Transcoder supports the following options: * S3: Amazon S3 creates and manages the keys used for encrypting your files. * S3-AWS-KMS: Amazon S3 calls the Amazon Key Management Service, which creates and manages the keys that are used for encrypting your files. If you specify S3-AWS-KMS and you don't want to use the default key, you must add the AWS-KMS key that you want to use to your pipeline. * AES-CBC-PKCS7: A padded cipher-block mode of operation originally used for HLS files. * AES-CTR: AES Counter Mode. * AES-GCM: AES Galois Counter Mode, a mode of operation that is an authenticated encryption format, meaning that a file, key, or initialization vector that has been tampered with fails the decryption process. For all three AES options, you must provide the following settings, which must be base64-encoded: * Key * Key MD5 * Initialization Vector Important: For the AES modes, your private encryption keys and your unencrypted data are never stored by AWS; therefore, it is important that you safely manage your encryption keys. If you lose them, you won't be able to unencrypt your data.
• eKeyMD5 - The MD5 digest of the key that you used to encrypt your input file, or that you want Elastic Transcoder to use to encrypt your output file. Elastic Transcoder uses the key digest as a checksum to make sure your key was not corrupted in transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.
• eKey - The data encryption key that you want Elastic Transcoder to use to encrypt your output file, or that was used to encrypt your input file. The key must be base64-encoded and it must be one of the following bit lengths before being base64-encoded: 128 , 192 , or 256 . The key must also be encrypted by using the Amazon Key Management Service.
• eInitializationVector - The series of random bits created by a random bit generator, unique for every encryption operation, that you used to encrypt your input files or that you want Elastic Transcoder to use to encrypt your output files. The initialization vector must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

eMode :: Lens' Encryption (Maybe Text)

The specific server-side encryption mode that you want Elastic Transcoder to use when decrypting your input files or encrypting your output files. Elastic Transcoder supports the following options: * S3: Amazon S3 creates and manages the keys used for encrypting your files. * S3-AWS-KMS: Amazon S3 calls the Amazon Key Management Service, which creates and manages the keys that are used for encrypting your files. If you specify S3-AWS-KMS and you don't want to use the default key, you must add the AWS-KMS key that you want to use to your pipeline. * AES-CBC-PKCS7: A padded cipher-block mode of operation originally used for HLS files. * AES-CTR: AES Counter Mode. * AES-GCM: AES Galois Counter Mode, a mode of operation that is an authenticated encryption format, meaning that a file, key, or initialization vector that has been tampered with fails the decryption process. For all three AES options, you must provide the following settings, which must be base64-encoded: * Key * Key MD5 * Initialization Vector Important: For the AES modes, your private encryption keys and your unencrypted data are never stored by AWS; therefore, it is important that you safely manage your encryption keys. If you lose them, you won't be able to unencrypt your data.

eKeyMD5 :: Lens' Encryption (Maybe Text)

The MD5 digest of the key that you used to encrypt your input file, or that you want Elastic Transcoder to use to encrypt your output file. Elastic Transcoder uses the key digest as a checksum to make sure your key was not corrupted in transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

eKey :: Lens' Encryption (Maybe Text)

The data encryption key that you want Elastic Transcoder to use to encrypt your output file, or that was used to encrypt your input file. The key must be base64-encoded and it must be one of the following bit lengths before being base64-encoded: 128 , 192 , or 256 . The key must also be encrypted by using the Amazon Key Management Service.

eInitializationVector :: Lens' Encryption (Maybe Text)

The series of random bits created by a random bit generator, unique for every encryption operation, that you used to encrypt your input files or that you want Elastic Transcoder to use to encrypt your output files. The initialization vector must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

HlsContentProtection

data HlsContentProtection

The HLS content protection settings, if any, that you want Elastic Transcoder to apply to your output files.

See: hlsContentProtection smart constructor.

Instances

Eq HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: HlsContentProtection -> HlsContentProtection -> Bool

(/=) :: HlsContentProtection -> HlsContentProtection -> Bool

Data HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> HlsContentProtection -> c HlsContentProtection

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c HlsContentProtection

toConstr :: HlsContentProtection -> Constr

dataTypeOf :: HlsContentProtection -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c HlsContentProtection)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c HlsContentProtection)

gmapT :: (forall b. Data b => b -> b) -> HlsContentProtection -> HlsContentProtection

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> HlsContentProtection -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> HlsContentProtection -> r

gmapQ :: (forall d. Data d => d -> u) -> HlsContentProtection -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> HlsContentProtection -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> HlsContentProtection -> m HlsContentProtection

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> HlsContentProtection -> m HlsContentProtection

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> HlsContentProtection -> m HlsContentProtection

Read HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS HlsContentProtection

readList :: ReadS [HlsContentProtection]

readPrec :: ReadPrec HlsContentProtection

readListPrec :: ReadPrec [HlsContentProtection]

Show HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> HlsContentProtection -> ShowS

show :: HlsContentProtection -> String

showList :: [HlsContentProtection] -> ShowS

Generic HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep HlsContentProtection :: Type -> Type

Methods

from :: HlsContentProtection -> Rep HlsContentProtection x

to :: Rep HlsContentProtection x -> HlsContentProtection

Hashable HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> HlsContentProtection -> Int

hash :: HlsContentProtection -> Int

ToJSON HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: HlsContentProtection -> Value

toEncoding :: HlsContentProtection -> Encoding

toJSONList :: [HlsContentProtection] -> Value

toEncodingList :: [HlsContentProtection] -> Encoding

FromJSON HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser HlsContentProtection

parseJSONList :: Value -> Parser [HlsContentProtection]

NFData HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: HlsContentProtection -> ()

type Rep HlsContentProtection

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep HlsContentProtection = D1 (MetaData "HlsContentProtection" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "HlsContentProtection'" PrefixI True) ((S1 (MetaSel (Just "_hcpKeyMD5") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_hcpKeyStoragePolicy") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_hcpKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 (MetaSel (Just "_hcpMethod") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_hcpInitializationVector") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_hcpLicenseAcquisitionURL") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))))

hlsContentProtection :: HlsContentProtection

Creates a value of HlsContentProtection with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• hcpKeyMD5 - If Elastic Transcoder is generating your key for you, you must leave this field blank. The MD5 digest of the key that you want Elastic Transcoder to use to encrypt your output file, and that you want Elastic Transcoder to use as a checksum to make sure your key was not corrupted in transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes before being base64- encoded.
• hcpKeyStoragePolicy - Specify whether you want Elastic Transcoder to write your HLS license key to an Amazon S3 bucket. If you choose WithVariantPlaylists , LicenseAcquisitionUrl must be left blank and Elastic Transcoder writes your data key into the same bucket as the associated playlist.
• hcpKey - If you want Elastic Transcoder to generate a key for you, leave this field blank. If you choose to supply your own key, you must encrypt the key by using AWS KMS. The key must be base64-encoded, and it must be one of the following bit lengths before being base64-encoded: 128 , 192 , or 256 .
• hcpMethod - The content protection method for your output. The only valid value is: aes-128 . This value is written into the method attribute of the EXT-X-KEY metadata tag in the output playlist.
• hcpInitializationVector - If Elastic Transcoder is generating your key for you, you must leave this field blank. The series of random bits created by a random bit generator, unique for every encryption operation, that you want Elastic Transcoder to use to encrypt your output files. The initialization vector must be base64-encoded, and it must be exactly 16 bytes before being base64-encoded.
• hcpLicenseAcquisitionURL - The location of the license key required to decrypt your HLS playlist. The URL must be an absolute path, and is referenced in the URI attribute of the EXT-X-KEY metadata tag in the playlist file.

hcpKeyMD5 :: Lens' HlsContentProtection (Maybe Text)

If Elastic Transcoder is generating your key for you, you must leave this field blank. The MD5 digest of the key that you want Elastic Transcoder to use to encrypt your output file, and that you want Elastic Transcoder to use as a checksum to make sure your key was not corrupted in transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes before being base64- encoded.

hcpKeyStoragePolicy :: Lens' HlsContentProtection (Maybe Text)

Specify whether you want Elastic Transcoder to write your HLS license key to an Amazon S3 bucket. If you choose WithVariantPlaylists , LicenseAcquisitionUrl must be left blank and Elastic Transcoder writes your data key into the same bucket as the associated playlist.

hcpKey :: Lens' HlsContentProtection (Maybe Text)

If you want Elastic Transcoder to generate a key for you, leave this field blank. If you choose to supply your own key, you must encrypt the key by using AWS KMS. The key must be base64-encoded, and it must be one of the following bit lengths before being base64-encoded: 128 , 192 , or 256 .

hcpMethod :: Lens' HlsContentProtection (Maybe Text)

The content protection method for your output. The only valid value is: aes-128 . This value is written into the method attribute of the EXT-X-KEY metadata tag in the output playlist.

hcpInitializationVector :: Lens' HlsContentProtection (Maybe Text)

If Elastic Transcoder is generating your key for you, you must leave this field blank. The series of random bits created by a random bit generator, unique for every encryption operation, that you want Elastic Transcoder to use to encrypt your output files. The initialization vector must be base64-encoded, and it must be exactly 16 bytes before being base64-encoded.

hcpLicenseAcquisitionURL :: Lens' HlsContentProtection (Maybe Text)

The location of the license key required to decrypt your HLS playlist. The URL must be an absolute path, and is referenced in the URI attribute of the EXT-X-KEY metadata tag in the playlist file.

InputCaptions

data InputCaptions

The captions to be created, if any.

See: inputCaptions smart constructor.

Instances

Eq InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: InputCaptions -> InputCaptions -> Bool

(/=) :: InputCaptions -> InputCaptions -> Bool

Data InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> InputCaptions -> c InputCaptions

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c InputCaptions

toConstr :: InputCaptions -> Constr

dataTypeOf :: InputCaptions -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c InputCaptions)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c InputCaptions)

gmapT :: (forall b. Data b => b -> b) -> InputCaptions -> InputCaptions

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> InputCaptions -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> InputCaptions -> r

gmapQ :: (forall d. Data d => d -> u) -> InputCaptions -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> InputCaptions -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> InputCaptions -> m InputCaptions

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> InputCaptions -> m InputCaptions

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> InputCaptions -> m InputCaptions

Read InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS InputCaptions

readList :: ReadS [InputCaptions]

readPrec :: ReadPrec InputCaptions

readListPrec :: ReadPrec [InputCaptions]

Show InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> InputCaptions -> ShowS

show :: InputCaptions -> String

showList :: [InputCaptions] -> ShowS

Generic InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep InputCaptions :: Type -> Type

Methods

from :: InputCaptions -> Rep InputCaptions x

to :: Rep InputCaptions x -> InputCaptions

Hashable InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> InputCaptions -> Int

hash :: InputCaptions -> Int

ToJSON InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: InputCaptions -> Value

toEncoding :: InputCaptions -> Encoding

toJSONList :: [InputCaptions] -> Value

toEncodingList :: [InputCaptions] -> Encoding

FromJSON InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser InputCaptions

parseJSONList :: Value -> Parser [InputCaptions]

NFData InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: InputCaptions -> ()

type Rep InputCaptions

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep InputCaptions = D1 (MetaData "InputCaptions" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "InputCaptions'" PrefixI True) (S1 (MetaSel (Just "_icMergePolicy") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_icCaptionSources") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [CaptionSource]))))

inputCaptions :: InputCaptions

Creates a value of InputCaptions with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• icMergePolicy - A policy that determines how Elastic Transcoder handles the existence of multiple captions. * MergeOverride: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the sidecar captions and ignores the embedded captions for that language. * MergeRetain: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the embedded captions and ignores the sidecar captions for that language. If CaptionSources is empty, Elastic Transcoder omits all sidecar captions from the output files. * Override: Elastic Transcoder transcodes only the sidecar captions that you specify in CaptionSources . MergePolicy cannot be null.
• icCaptionSources - Source files for the input sidecar captions used during the transcoding process. To omit all sidecar captions, leave CaptionSources blank.

icMergePolicy :: Lens' InputCaptions (Maybe Text)

A policy that determines how Elastic Transcoder handles the existence of multiple captions. * MergeOverride: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the sidecar captions and ignores the embedded captions for that language. * MergeRetain: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the embedded captions and ignores the sidecar captions for that language. If CaptionSources is empty, Elastic Transcoder omits all sidecar captions from the output files. * Override: Elastic Transcoder transcodes only the sidecar captions that you specify in CaptionSources . MergePolicy cannot be null.

icCaptionSources :: Lens' InputCaptions [CaptionSource]

Source files for the input sidecar captions used during the transcoding process. To omit all sidecar captions, leave CaptionSources blank.

Job'

data Job'

A section of the response body that provides information about the job that is created.

See: job' smart constructor.

Instances

Eq Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Job' -> Job' -> Bool

(/=) :: Job' -> Job' -> Bool

Data Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Job' -> c Job'

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Job'

toConstr :: Job' -> Constr

dataTypeOf :: Job' -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Job')

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Job')

gmapT :: (forall b. Data b => b -> b) -> Job' -> Job'

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Job' -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Job' -> r

gmapQ :: (forall d. Data d => d -> u) -> Job' -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Job' -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Job' -> m Job'

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Job' -> m Job'

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Job' -> m Job'

Read Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Job'

readList :: ReadS [Job']

readPrec :: ReadPrec Job'

readListPrec :: ReadPrec [Job']

Show Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Job' -> ShowS

show :: Job' -> String

showList :: [Job'] -> ShowS

Generic Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Job' :: Type -> Type

Methods

from :: Job' -> Rep Job' x

to :: Rep Job' x -> Job'

Hashable Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Job' -> Int

hash :: Job' -> Int

FromJSON Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Job'

parseJSONList :: Value -> Parser [Job']

NFData Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Job' -> ()

type Rep Job'

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Job' = D1 (MetaData "Job'" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "Job''" PrefixI True) (((S1 (MetaSel (Just "_jStatus") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_jPipelineId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_jARN") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 (MetaSel (Just "_jInputs") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [JobInput])) :*: (S1 (MetaSel (Just "_jInput") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe JobInput)) :*: S1 (MetaSel (Just "_jUserMetadata") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe (Map Text Text)))))) :*: ((S1 (MetaSel (Just "_jOutputs") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [JobOutput])) :*: (S1 (MetaSel (Just "_jOutput") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe JobOutput)) :*: S1 (MetaSel (Just "_jId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 (MetaSel (Just "_jPlaylists") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [Playlist])) :*: (S1 (MetaSel (Just "_jOutputKeyPrefix") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_jTiming") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Timing)))))))

job' :: Job'

Creates a value of Job' with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• jStatus - The status of the job: Submitted , Progressing , Complete , Canceled , or Error .
• jPipelineId - The Id of the pipeline that you want Elastic Transcoder to use for transcoding. The pipeline determines several settings, including the Amazon S3 bucket from which Elastic Transcoder gets the files to transcode and the bucket into which Elastic Transcoder puts the transcoded files.
• jARN - The Amazon Resource Name (ARN) for the job.
• jInputs - Information about the files that you're transcoding. If you specified multiple files for this job, Elastic Transcoder stitches the files together to make one output.
• jInput - A section of the request or response body that provides information about the file that is being transcoded.
• jUserMetadata - User-defined metadata that you want to associate with an Elastic Transcoder job. You specify metadata in key/value pairs, and you can add up to 10 key/value pairs per job. Elastic Transcoder does not guarantee that key/value pairs are returned in the same order in which you specify them. Metadata keys and values must use characters from the following list: * 0-9 * A-Z and a-z * Space * The following symbols: _.:/=+-%@
• jOutputs - Information about the output files. We recommend that you use the Outputs syntax for all jobs, even when you want Elastic Transcoder to transcode a file into only one format. Do not use both the Outputs and Output syntaxes in the same request. You can create a maximum of 30 outputs per job. If you specify more than one output for a job, Elastic Transcoder creates the files for each output in the order in which you specify them in the job.
• jOutput - If you specified one output for a job, information about that output. If you specified multiple outputs for a job, the Output object lists information about the first output. This duplicates the information that is listed for the first output in the Outputs object. Important: Outputs recommended instead. A section of the request or response body that provides information about the transcoded (target) file.
• jId - The identifier that Elastic Transcoder assigned to the job. You use this value to get settings for the job or to delete the job.
• jPlaylists - Important: Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), Playlists contains information about the master playlists that you want Elastic Transcoder to create. The maximum number of master playlists in a job is 30.
• jOutputKeyPrefix - The value, if any, that you want Elastic Transcoder to prepend to the names of all files that this job creates, including output files, thumbnails, and playlists. We recommend that you add a / or some other delimiter to the end of the OutputKeyPrefix .
• jTiming - Details about the timing of a job.

jStatus :: Lens' Job' (Maybe Text)

The status of the job: Submitted , Progressing , Complete , Canceled , or Error .

jPipelineId :: Lens' Job' (Maybe Text)

The Id of the pipeline that you want Elastic Transcoder to use for transcoding. The pipeline determines several settings, including the Amazon S3 bucket from which Elastic Transcoder gets the files to transcode and the bucket into which Elastic Transcoder puts the transcoded files.

jARN :: Lens' Job' (Maybe Text)

The Amazon Resource Name (ARN) for the job.

jInputs :: Lens' Job' [JobInput]

Information about the files that you're transcoding. If you specified multiple files for this job, Elastic Transcoder stitches the files together to make one output.

jInput :: Lens' Job' (Maybe JobInput)

A section of the request or response body that provides information about the file that is being transcoded.

jUserMetadata :: Lens' Job' (HashMap Text Text)

User-defined metadata that you want to associate with an Elastic Transcoder job. You specify metadata in key/value pairs, and you can add up to 10 key/value pairs per job. Elastic Transcoder does not guarantee that key/value pairs are returned in the same order in which you specify them. Metadata keys and values must use characters from the following list: * 0-9 * A-Z and a-z * Space * The following symbols: _.:/=+-%@

jOutputs :: Lens' Job' [JobOutput]

Information about the output files. We recommend that you use the Outputs syntax for all jobs, even when you want Elastic Transcoder to transcode a file into only one format. Do not use both the Outputs and Output syntaxes in the same request. You can create a maximum of 30 outputs per job. If you specify more than one output for a job, Elastic Transcoder creates the files for each output in the order in which you specify them in the job.

jOutput :: Lens' Job' (Maybe JobOutput)

If you specified one output for a job, information about that output. If you specified multiple outputs for a job, the Output object lists information about the first output. This duplicates the information that is listed for the first output in the Outputs object. Important: Outputs recommended instead. A section of the request or response body that provides information about the transcoded (target) file.

jId :: Lens' Job' (Maybe Text)

The identifier that Elastic Transcoder assigned to the job. You use this value to get settings for the job or to delete the job.

jPlaylists :: Lens' Job' [Playlist]

Important: Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), Playlists contains information about the master playlists that you want Elastic Transcoder to create. The maximum number of master playlists in a job is 30.

jOutputKeyPrefix :: Lens' Job' (Maybe Text)

The value, if any, that you want Elastic Transcoder to prepend to the names of all files that this job creates, including output files, thumbnails, and playlists. We recommend that you add a / or some other delimiter to the end of the OutputKeyPrefix .

jTiming :: Lens' Job' (Maybe Timing)

Details about the timing of a job.

JobAlbumArt

data JobAlbumArt

The .jpg or .png file associated with an audio file.

See: jobAlbumArt smart constructor.

Instances

Eq JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: JobAlbumArt -> JobAlbumArt -> Bool

(/=) :: JobAlbumArt -> JobAlbumArt -> Bool

Data JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> JobAlbumArt -> c JobAlbumArt

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c JobAlbumArt

toConstr :: JobAlbumArt -> Constr

dataTypeOf :: JobAlbumArt -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c JobAlbumArt)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c JobAlbumArt)

gmapT :: (forall b. Data b => b -> b) -> JobAlbumArt -> JobAlbumArt

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> JobAlbumArt -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> JobAlbumArt -> r

gmapQ :: (forall d. Data d => d -> u) -> JobAlbumArt -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> JobAlbumArt -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> JobAlbumArt -> m JobAlbumArt

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> JobAlbumArt -> m JobAlbumArt

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> JobAlbumArt -> m JobAlbumArt

Read JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS JobAlbumArt

readList :: ReadS [JobAlbumArt]

readPrec :: ReadPrec JobAlbumArt

readListPrec :: ReadPrec [JobAlbumArt]

Show JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> JobAlbumArt -> ShowS

show :: JobAlbumArt -> String

showList :: [JobAlbumArt] -> ShowS

Generic JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep JobAlbumArt :: Type -> Type

Methods

from :: JobAlbumArt -> Rep JobAlbumArt x

to :: Rep JobAlbumArt x -> JobAlbumArt

Hashable JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> JobAlbumArt -> Int

hash :: JobAlbumArt -> Int

ToJSON JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: JobAlbumArt -> Value

toEncoding :: JobAlbumArt -> Encoding

toJSONList :: [JobAlbumArt] -> Value

toEncodingList :: [JobAlbumArt] -> Encoding

FromJSON JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser JobAlbumArt

parseJSONList :: Value -> Parser [JobAlbumArt]

NFData JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: JobAlbumArt -> ()

type Rep JobAlbumArt

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep JobAlbumArt = D1 (MetaData "JobAlbumArt" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "JobAlbumArt'" PrefixI True) (S1 (MetaSel (Just "_jaaMergePolicy") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_jaaArtwork") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [Artwork]))))

jobAlbumArt :: JobAlbumArt

Creates a value of JobAlbumArt with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• jaaMergePolicy - A policy that determines how Elastic Transcoder handles the existence of multiple album artwork files. * Replace: The specified album art replaces any existing album art. * Prepend: The specified album art is placed in front of any existing album art. * Append: The specified album art is placed after any existing album art. * Fallback: If the original input file contains artwork, Elastic Transcoder uses that artwork for the output. If the original input does not contain artwork, Elastic Transcoder uses the specified album art file.
• jaaArtwork - The file to be used as album art. There can be multiple artworks associated with an audio file, to a maximum of 20. Valid formats are .jpg and .png

jaaMergePolicy :: Lens' JobAlbumArt (Maybe Text)

A policy that determines how Elastic Transcoder handles the existence of multiple album artwork files. * Replace: The specified album art replaces any existing album art. * Prepend: The specified album art is placed in front of any existing album art. * Append: The specified album art is placed after any existing album art. * Fallback: If the original input file contains artwork, Elastic Transcoder uses that artwork for the output. If the original input does not contain artwork, Elastic Transcoder uses the specified album art file.

jaaArtwork :: Lens' JobAlbumArt [Artwork]

The file to be used as album art. There can be multiple artworks associated with an audio file, to a maximum of 20. Valid formats are .jpg and .png

JobInput

data JobInput

Information about the file that you're transcoding.

See: jobInput smart constructor.

Instances

Eq JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: JobInput -> JobInput -> Bool

(/=) :: JobInput -> JobInput -> Bool

Data JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> JobInput -> c JobInput

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c JobInput

toConstr :: JobInput -> Constr

dataTypeOf :: JobInput -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c JobInput)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c JobInput)

gmapT :: (forall b. Data b => b -> b) -> JobInput -> JobInput

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> JobInput -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> JobInput -> r

gmapQ :: (forall d. Data d => d -> u) -> JobInput -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> JobInput -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> JobInput -> m JobInput

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> JobInput -> m JobInput

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> JobInput -> m JobInput

Read JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS JobInput

readList :: ReadS [JobInput]

readPrec :: ReadPrec JobInput

readListPrec :: ReadPrec [JobInput]

Show JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> JobInput -> ShowS

show :: JobInput -> String

showList :: [JobInput] -> ShowS

Generic JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep JobInput :: Type -> Type

Methods

from :: JobInput -> Rep JobInput x

to :: Rep JobInput x -> JobInput

Hashable JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> JobInput -> Int

hash :: JobInput -> Int

ToJSON JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: JobInput -> Value

toEncoding :: JobInput -> Encoding

toJSONList :: [JobInput] -> Value

toEncodingList :: [JobInput] -> Encoding

FromJSON JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser JobInput

parseJSONList :: Value -> Parser [JobInput]

NFData JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: JobInput -> ()

type Rep JobInput

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep JobInput = D1 (MetaData "JobInput" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "JobInput'" PrefixI True) (((S1 (MetaSel (Just "_jiFrameRate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_jiResolution") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_jiAspectRatio") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_jiTimeSpan") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe TimeSpan)) :*: S1 (MetaSel (Just "_jiEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption))))) :*: ((S1 (MetaSel (Just "_jiKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_jiDetectedProperties") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe DetectedProperties))) :*: (S1 (MetaSel (Just "_jiContainer") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_jiInterlaced") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_jiInputCaptions") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe InputCaptions)))))))

jobInput :: JobInput

Creates a value of JobInput with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• jiFrameRate - The frame rate of the input file. If you want Elastic Transcoder to automatically detect the frame rate of the input file, specify auto . If you want to specify the frame rate for the input file, enter one of the following values: 10 , 15 , 23.97 , 24 , 25 , 29.97 , 30 , 60 If you specify a value other than auto , Elastic Transcoder disables automatic detection of the frame rate.
• jiResolution - This value must be auto , which causes Elastic Transcoder to automatically detect the resolution of the input file.
• jiAspectRatio - The aspect ratio of the input file. If you want Elastic Transcoder to automatically detect the aspect ratio of the input file, specify auto . If you want to specify the aspect ratio for the output file, enter one of the following values: 1:1 , 4:3 , 3:2 , 16:9 If you specify a value other than auto , Elastic Transcoder disables automatic detection of the aspect ratio.
• jiTimeSpan - Settings for clipping an input. Each input can have different clip settings.
• jiEncryption - The encryption settings, if any, that are used for decrypting your input files. If your input file is encrypted, you must specify the mode that Elastic Transcoder uses to decrypt your file.
• jiKey - The name of the file to transcode. Elsewhere in the body of the JSON block is the the ID of the pipeline to use for processing the job. The InputBucket object in that pipeline tells Elastic Transcoder which Amazon S3 bucket to get the file from. If the file name includes a prefix, such as cooking/lasagna.mpg , include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.
• jiDetectedProperties - The detected properties of the input file.
• jiContainer - The container type for the input file. If you want Elastic Transcoder to automatically detect the container type of the input file, specify auto . If you want to specify the container type for the input file, enter one of the following values: 3gp , aac , asf , avi , divx , flv , m4a , mkv , mov , mp3 , mp4 , mpeg , mpeg-ps , mpeg-ts , mxf , ogg , vob , wav , webm
• jiInterlaced - Whether the input file is interlaced. If you want Elastic Transcoder to automatically detect whether the input file is interlaced, specify auto . If you want to specify whether the input file is interlaced, enter one of the following values: true , false If you specify a value other than auto , Elastic Transcoder disables automatic detection of interlacing.
• jiInputCaptions - You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: * Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. * Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc , srt , and webvtt . If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain , and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.

jiFrameRate :: Lens' JobInput (Maybe Text)

The frame rate of the input file. If you want Elastic Transcoder to automatically detect the frame rate of the input file, specify auto . If you want to specify the frame rate for the input file, enter one of the following values: 10 , 15 , 23.97 , 24 , 25 , 29.97 , 30 , 60 If you specify a value other than auto , Elastic Transcoder disables automatic detection of the frame rate.

jiResolution :: Lens' JobInput (Maybe Text)

This value must be auto , which causes Elastic Transcoder to automatically detect the resolution of the input file.

jiAspectRatio :: Lens' JobInput (Maybe Text)

The aspect ratio of the input file. If you want Elastic Transcoder to automatically detect the aspect ratio of the input file, specify auto . If you want to specify the aspect ratio for the output file, enter one of the following values: 1:1 , 4:3 , 3:2 , 16:9 If you specify a value other than auto , Elastic Transcoder disables automatic detection of the aspect ratio.

jiTimeSpan :: Lens' JobInput (Maybe TimeSpan)

Settings for clipping an input. Each input can have different clip settings.

jiEncryption :: Lens' JobInput (Maybe Encryption)

The encryption settings, if any, that are used for decrypting your input files. If your input file is encrypted, you must specify the mode that Elastic Transcoder uses to decrypt your file.

jiKey :: Lens' JobInput (Maybe Text)

The name of the file to transcode. Elsewhere in the body of the JSON block is the the ID of the pipeline to use for processing the job. The InputBucket object in that pipeline tells Elastic Transcoder which Amazon S3 bucket to get the file from. If the file name includes a prefix, such as cooking/lasagna.mpg , include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.

jiDetectedProperties :: Lens' JobInput (Maybe DetectedProperties)

The detected properties of the input file.

jiContainer :: Lens' JobInput (Maybe Text)

The container type for the input file. If you want Elastic Transcoder to automatically detect the container type of the input file, specify auto . If you want to specify the container type for the input file, enter one of the following values: 3gp , aac , asf , avi , divx , flv , m4a , mkv , mov , mp3 , mp4 , mpeg , mpeg-ps , mpeg-ts , mxf , ogg , vob , wav , webm

jiInterlaced :: Lens' JobInput (Maybe Text)

Whether the input file is interlaced. If you want Elastic Transcoder to automatically detect whether the input file is interlaced, specify auto . If you want to specify whether the input file is interlaced, enter one of the following values: true , false If you specify a value other than auto , Elastic Transcoder disables automatic detection of interlacing.

jiInputCaptions :: Lens' JobInput (Maybe InputCaptions)

You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: * Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. * Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc , srt , and webvtt . If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain , and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.

JobOutput

data JobOutput

Important: Outputs recommended instead.

If you specified one output for a job, information about that output. If you specified multiple outputs for a job, the Output object lists information about the first output. This duplicates the information that is listed for the first output in the Outputs object.

See: jobOutput smart constructor.

Instances

Eq JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: JobOutput -> JobOutput -> Bool

(/=) :: JobOutput -> JobOutput -> Bool

Data JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> JobOutput -> c JobOutput

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c JobOutput

toConstr :: JobOutput -> Constr

dataTypeOf :: JobOutput -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c JobOutput)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c JobOutput)

gmapT :: (forall b. Data b => b -> b) -> JobOutput -> JobOutput

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> JobOutput -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> JobOutput -> r

gmapQ :: (forall d. Data d => d -> u) -> JobOutput -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> JobOutput -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> JobOutput -> m JobOutput

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> JobOutput -> m JobOutput

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> JobOutput -> m JobOutput

Read JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS JobOutput

readList :: ReadS [JobOutput]

readPrec :: ReadPrec JobOutput

readListPrec :: ReadPrec [JobOutput]

Show JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> JobOutput -> ShowS

show :: JobOutput -> String

showList :: [JobOutput] -> ShowS

Generic JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep JobOutput :: Type -> Type

Methods

from :: JobOutput -> Rep JobOutput x

to :: Rep JobOutput x -> JobOutput

Hashable JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> JobOutput -> Int

hash :: JobOutput -> Int

FromJSON JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser JobOutput

parseJSONList :: Value -> Parser [JobOutput]

NFData JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: JobOutput -> ()

type Rep JobOutput

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep JobOutput = D1 (MetaData "JobOutput" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "JobOutput'" PrefixI True) ((((S1 (MetaSel (Just "_joAppliedColorSpaceConversion") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_joThumbnailPattern") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_joStatus") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_joHeight") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Int)) :*: S1 (MetaSel (Just "_joFrameRate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 (MetaSel (Just "_joCaptions") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Captions)) :*: S1 (MetaSel (Just "_joPresetId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_joComposition") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [Clip])) :*: (S1 (MetaSel (Just "_joAlbumArt") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe JobAlbumArt)) :*: S1 (MetaSel (Just "_joFileSize") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Integer)))))) :*: (((S1 (MetaSel (Just "_joWatermarks") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [JobWatermark])) :*: S1 (MetaSel (Just "_joWidth") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Int))) :*: (S1 (MetaSel (Just "_joEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption)) :*: (S1 (MetaSel (Just "_joKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_joStatusDetail") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 (MetaSel (Just "_joId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_joSegmentDuration") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_joDurationMillis") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Integer)))) :*: (S1 (MetaSel (Just "_joThumbnailEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption)) :*: (S1 (MetaSel (Just "_joDuration") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Integer)) :*: S1 (MetaSel (Just "_joRotate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))))))

jobOutput :: JobOutput

Creates a value of JobOutput with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• joAppliedColorSpaceConversion - If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter is not be included in the job response.
• joThumbnailPattern - Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files. If you don't want Elastic Transcoder to create thumbnails, specify "". If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence: * {count} (Required) : If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count} , Elastic Transcoder adds a five-digit sequence number (beginning with 00001 ) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file. Important: If you specify a literal value and/or {resolution} but you omit {count} , Elastic Transcoder returns a validation error and does not create the job. * Literal values (Optional) : You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count} . * {resolution} (Optional) : If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object. When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput . Elastic Transcoder also appends the applicable file name extension.
• joStatus - The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status . If you specified more than one output: * Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. * When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. * Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. * When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete . If Outputs:Status for one or more outputs is Error , the terminal status for Job:Status is also Error . The value of Status is one of the following: Submitted , Progressing , Complete , Canceled , or Error .
• joHeight - Height of the output file, in pixels.
• joFrameRate - Frame rate of the output file, in frames per second.
• joCaptions - You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: * Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. * Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc , srt , and webvtt . If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain , and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.
• joPresetId - The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets .
• joComposition - You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.
• joAlbumArt - The album art to be associated with the output file, if any.
• joFileSize - File size of the output file, in bytes.
• joWatermarks - Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add covers the first one, the third one covers the second, and the fourth one covers the third.
• joWidth - Specifies the width of the output file in pixels.
• joEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder writes an unencrypted file to your Amazon S3 bucket.
• joKey - The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
• joStatusDetail - Information that further explains Status .
• joId - A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
• joSegmentDuration - Important: (Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 , MPEG-DASH , and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration , though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration , the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist.
• joDurationMillis - Duration of the output file, in milliseconds.
• joThumbnailEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
• joDuration - Duration of the output file, in seconds.
• joRotate - The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values: auto , 0 , 90 , 180 , 270 The value auto generally works only if the file that you're transcoding contains rotation metadata.

joAppliedColorSpaceConversion :: Lens' JobOutput (Maybe Text)

If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter is not be included in the job response.

joThumbnailPattern :: Lens' JobOutput (Maybe Text)

Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files. If you don't want Elastic Transcoder to create thumbnails, specify "". If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence: * {count} (Required) : If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count} , Elastic Transcoder adds a five-digit sequence number (beginning with 00001 ) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file. Important: If you specify a literal value and/or {resolution} but you omit {count} , Elastic Transcoder returns a validation error and does not create the job. * Literal values (Optional) : You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count} . * {resolution} (Optional) : If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object. When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput . Elastic Transcoder also appends the applicable file name extension.

joStatus :: Lens' JobOutput (Maybe Text)

The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status . If you specified more than one output: * Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. * When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. * Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. * When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete . If Outputs:Status for one or more outputs is Error , the terminal status for Job:Status is also Error . The value of Status is one of the following: Submitted , Progressing , Complete , Canceled , or Error .

joHeight :: Lens' JobOutput (Maybe Int)

Height of the output file, in pixels.

joFrameRate :: Lens' JobOutput (Maybe Text)

Frame rate of the output file, in frames per second.

joCaptions :: Lens' JobOutput (Maybe Captions)

You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: * Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. * Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc , srt , and webvtt . If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain , and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.

joPresetId :: Lens' JobOutput (Maybe Text)

The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets .

joComposition :: Lens' JobOutput [Clip]

You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.

joAlbumArt :: Lens' JobOutput (Maybe JobAlbumArt)

The album art to be associated with the output file, if any.

joFileSize :: Lens' JobOutput (Maybe Integer)

File size of the output file, in bytes.

joWatermarks :: Lens' JobOutput [JobWatermark]

Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add covers the first one, the third one covers the second, and the fourth one covers the third.

joWidth :: Lens' JobOutput (Maybe Int)

Specifies the width of the output file in pixels.

joEncryption :: Lens' JobOutput (Maybe Encryption)

The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder writes an unencrypted file to your Amazon S3 bucket.

joKey :: Lens' JobOutput (Maybe Text)

The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.

joStatusDetail :: Lens' JobOutput (Maybe Text)

Information that further explains Status .

joId :: Lens' JobOutput (Maybe Text)

A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.

joSegmentDuration :: Lens' JobOutput (Maybe Text)

Important: (Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 , MPEG-DASH , and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration , though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration , the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist.

joDurationMillis :: Lens' JobOutput (Maybe Integer)

Duration of the output file, in milliseconds.

joThumbnailEncryption :: Lens' JobOutput (Maybe Encryption)

The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.

joDuration :: Lens' JobOutput (Maybe Integer)

Duration of the output file, in seconds.

joRotate :: Lens' JobOutput (Maybe Text)

The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values: auto , 0 , 90 , 180 , 270 The value auto generally works only if the file that you're transcoding contains rotation metadata.

JobWatermark

data JobWatermark

Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.

See: jobWatermark smart constructor.

Instances

Eq JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: JobWatermark -> JobWatermark -> Bool

(/=) :: JobWatermark -> JobWatermark -> Bool

Data JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> JobWatermark -> c JobWatermark

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c JobWatermark

toConstr :: JobWatermark -> Constr

dataTypeOf :: JobWatermark -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c JobWatermark)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c JobWatermark)

gmapT :: (forall b. Data b => b -> b) -> JobWatermark -> JobWatermark

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> JobWatermark -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> JobWatermark -> r

gmapQ :: (forall d. Data d => d -> u) -> JobWatermark -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> JobWatermark -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> JobWatermark -> m JobWatermark

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> JobWatermark -> m JobWatermark

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> JobWatermark -> m JobWatermark

Read JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS JobWatermark

readList :: ReadS [JobWatermark]

readPrec :: ReadPrec JobWatermark

readListPrec :: ReadPrec [JobWatermark]

Show JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> JobWatermark -> ShowS

show :: JobWatermark -> String

showList :: [JobWatermark] -> ShowS

Generic JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep JobWatermark :: Type -> Type

Methods

from :: JobWatermark -> Rep JobWatermark x

to :: Rep JobWatermark x -> JobWatermark

Hashable JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> JobWatermark -> Int

hash :: JobWatermark -> Int

ToJSON JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: JobWatermark -> Value

toEncoding :: JobWatermark -> Encoding

toJSONList :: [JobWatermark] -> Value

toEncodingList :: [JobWatermark] -> Encoding

FromJSON JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser JobWatermark

parseJSONList :: Value -> Parser [JobWatermark]

NFData JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: JobWatermark -> ()

type Rep JobWatermark

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep JobWatermark = D1 (MetaData "JobWatermark" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "JobWatermark'" PrefixI True) (S1 (MetaSel (Just "_jwPresetWatermarkId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_jwInputKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_jwEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Encryption)))))

jobWatermark :: JobWatermark

Creates a value of JobWatermark with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• jwPresetWatermarkId - The ID of the watermark settings that Elastic Transcoder uses to add watermarks to the video during transcoding. The settings are in the preset specified by Preset for the current output. In that preset, the value of Watermarks Id tells Elastic Transcoder which settings to use.
• jwInputKey - The name of the .png or .jpg file that you want to use for the watermark. To determine which Amazon S3 bucket contains the specified file, Elastic Transcoder checks the pipeline specified by Pipeline ; the Input Bucket object in that pipeline identifies the bucket. If the file name includes a prefix, for example, logos/128x64.png , include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.
• jwEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your watermarks.

jwPresetWatermarkId :: Lens' JobWatermark (Maybe Text)

The ID of the watermark settings that Elastic Transcoder uses to add watermarks to the video during transcoding. The settings are in the preset specified by Preset for the current output. In that preset, the value of Watermarks Id tells Elastic Transcoder which settings to use.

jwInputKey :: Lens' JobWatermark (Maybe Text)

The name of the .png or .jpg file that you want to use for the watermark. To determine which Amazon S3 bucket contains the specified file, Elastic Transcoder checks the pipeline specified by Pipeline ; the Input Bucket object in that pipeline identifies the bucket. If the file name includes a prefix, for example, logos/128x64.png , include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.

jwEncryption :: Lens' JobWatermark (Maybe Encryption)

The encryption settings, if any, that you want Elastic Transcoder to apply to your watermarks.

Notifications

data Notifications

The Amazon Simple Notification Service (Amazon SNS) topic or topics to notify in order to report job status.

Important: To receive notifications, you must also subscribe to the new topic in the Amazon SNS console.

See: notifications smart constructor.

Instances

Eq Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Notifications -> Notifications -> Bool

(/=) :: Notifications -> Notifications -> Bool

Data Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Notifications -> c Notifications

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Notifications

toConstr :: Notifications -> Constr

dataTypeOf :: Notifications -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Notifications)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Notifications)

gmapT :: (forall b. Data b => b -> b) -> Notifications -> Notifications

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Notifications -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Notifications -> r

gmapQ :: (forall d. Data d => d -> u) -> Notifications -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Notifications -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Notifications -> m Notifications

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Notifications -> m Notifications

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Notifications -> m Notifications

Read Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Notifications

readList :: ReadS [Notifications]

readPrec :: ReadPrec Notifications

readListPrec :: ReadPrec [Notifications]

Show Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Notifications -> ShowS

show :: Notifications -> String

showList :: [Notifications] -> ShowS

Generic Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Notifications :: Type -> Type

Methods

from :: Notifications -> Rep Notifications x

to :: Rep Notifications x -> Notifications

Hashable Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Notifications -> Int

hash :: Notifications -> Int

ToJSON Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: Notifications -> Value

toEncoding :: Notifications -> Encoding

toJSONList :: [Notifications] -> Value

toEncodingList :: [Notifications] -> Encoding

FromJSON Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Notifications

parseJSONList :: Value -> Parser [Notifications]

NFData Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Notifications -> ()

type Rep Notifications

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Notifications = D1 (MetaData "Notifications" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "Notifications'" PrefixI True) ((S1 (MetaSel (Just "_nError") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_nWarning") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_nProgressing") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_nCompleted") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))))

notifications :: Notifications

Creates a value of Notifications with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• nError - The Amazon SNS topic that you want to notify when Elastic Transcoder encounters an error condition.
• nWarning - The Amazon SNS topic that you want to notify when Elastic Transcoder encounters a warning condition.
• nProgressing - The Amazon Simple Notification Service (Amazon SNS) topic that you want to notify when Elastic Transcoder has started to process the job.
• nCompleted - The Amazon SNS topic that you want to notify when Elastic Transcoder has finished processing the job.

nError :: Lens' Notifications (Maybe Text)

The Amazon SNS topic that you want to notify when Elastic Transcoder encounters an error condition.

nWarning :: Lens' Notifications (Maybe Text)

The Amazon SNS topic that you want to notify when Elastic Transcoder encounters a warning condition.

nProgressing :: Lens' Notifications (Maybe Text)

The Amazon Simple Notification Service (Amazon SNS) topic that you want to notify when Elastic Transcoder has started to process the job.

nCompleted :: Lens' Notifications (Maybe Text)

The Amazon SNS topic that you want to notify when Elastic Transcoder has finished processing the job.

Permission

data Permission

The Permission structure.

See: permission smart constructor.

Instances

Eq Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Permission -> Permission -> Bool

(/=) :: Permission -> Permission -> Bool

Data Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Permission -> c Permission

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Permission

toConstr :: Permission -> Constr

dataTypeOf :: Permission -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Permission)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Permission)

gmapT :: (forall b. Data b => b -> b) -> Permission -> Permission

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Permission -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Permission -> r

gmapQ :: (forall d. Data d => d -> u) -> Permission -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Permission -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Permission -> m Permission

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Permission -> m Permission

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Permission -> m Permission

Read Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Permission

readList :: ReadS [Permission]

readPrec :: ReadPrec Permission

readListPrec :: ReadPrec [Permission]

Show Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Permission -> ShowS

show :: Permission -> String

showList :: [Permission] -> ShowS

Generic Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Permission :: Type -> Type

Methods

from :: Permission -> Rep Permission x

to :: Rep Permission x -> Permission

Hashable Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Permission -> Int

hash :: Permission -> Int

ToJSON Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

toJSON :: Permission -> Value

toEncoding :: Permission -> Encoding

toJSONList :: [Permission] -> Value

toEncodingList :: [Permission] -> Encoding

FromJSON Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Permission

parseJSONList :: Value -> Parser [Permission]

NFData Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Permission -> ()

type Rep Permission

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Permission = D1 (MetaData "Permission" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "Permission'" PrefixI True) (S1 (MetaSel (Just "_pAccess") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [Text])) :*: (S1 (MetaSel (Just "_pGranteeType") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_pGrantee") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))))

permission :: Permission

Creates a value of Permission with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• pAccess - The permission that you want to give to the AWS user that is listed in Grantee. Valid values include: * READ : The grantee can read the thumbnails and metadata for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * READ_ACP : The grantee can read the object ACL for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * WRITE_ACP : The grantee can write the ACL for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * FULL_CONTROL : The grantee has READ, READ_ACP, and WRITE_ACP permissions for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket.
• pGranteeType - The type of value that appears in the Grantee object: * Canonical : Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. Important: A canonical user ID is not the same as an AWS account number. * Email : The registered email address of an AWS account. * Group : One of the following predefined Amazon S3 groups: AllUsers , AuthenticatedUsers , or LogDelivery .
• pGrantee - The AWS user or group that you want to have access to transcoded files and playlists. To identify the user or group, you can specify the canonical user ID for an AWS account, an origin access identity for a CloudFront distribution, the registered email address of an AWS account, or a predefined Amazon S3 group.

pAccess :: Lens' Permission [Text]

The permission that you want to give to the AWS user that is listed in Grantee. Valid values include: * READ : The grantee can read the thumbnails and metadata for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * READ_ACP : The grantee can read the object ACL for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * WRITE_ACP : The grantee can write the ACL for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * FULL_CONTROL : The grantee has READ, READ_ACP, and WRITE_ACP permissions for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket.

pGranteeType :: Lens' Permission (Maybe Text)

The type of value that appears in the Grantee object: * Canonical : Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. Important: A canonical user ID is not the same as an AWS account number. * Email : The registered email address of an AWS account. * Group : One of the following predefined Amazon S3 groups: AllUsers , AuthenticatedUsers , or LogDelivery .

pGrantee :: Lens' Permission (Maybe Text)

The AWS user or group that you want to have access to transcoded files and playlists. To identify the user or group, you can specify the canonical user ID for an AWS account, an origin access identity for a CloudFront distribution, the registered email address of an AWS account, or a predefined Amazon S3 group.

Pipeline

data Pipeline

The pipeline (queue) that is used to manage jobs.

See: pipeline smart constructor.

Instances

Eq Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

(==) :: Pipeline -> Pipeline -> Bool

(/=) :: Pipeline -> Pipeline -> Bool

Data Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Pipeline -> c Pipeline

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c Pipeline

toConstr :: Pipeline -> Constr

dataTypeOf :: Pipeline -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c Pipeline)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c Pipeline)

gmapT :: (forall b. Data b => b -> b) -> Pipeline -> Pipeline

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Pipeline -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Pipeline -> r

gmapQ :: (forall d. Data d => d -> u) -> Pipeline -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> Pipeline -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> Pipeline -> m Pipeline

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Pipeline -> m Pipeline

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Pipeline -> m Pipeline

Read Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

readsPrec :: Int -> ReadS Pipeline

readList :: ReadS [Pipeline]

readPrec :: ReadPrec Pipeline

readListPrec :: ReadPrec [Pipeline]

Show Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

showsPrec :: Int -> Pipeline -> ShowS

show :: Pipeline -> String

showList :: [Pipeline] -> ShowS

Generic Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Associated Types

type Rep Pipeline :: Type -> Type

Methods

from :: Pipeline -> Rep Pipeline x

to :: Rep Pipeline x -> Pipeline

Hashable Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

hashWithSalt :: Int -> Pipeline -> Int

hash :: Pipeline -> Int

FromJSON Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

parseJSON :: Value -> Parser Pipeline

parseJSONList :: Value -> Parser [Pipeline]

NFData Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

Methods

rnf :: Pipeline -> ()

type Rep Pipeline

Defined in Network.AWS.ElasticTranscoder.Types.Product

type Rep Pipeline = D1 (MetaData "Pipeline" "Network.AWS.ElasticTranscoder.Types.Product" "amazonka-elastictranscoder-1.6.1-7rLW7I32F8uHzJtW36ptpK" False) (C1 (MetaCons "Pipeline'" PrefixI True) (((S1 (MetaSel (Just "_pipStatus") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_pipARN") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_pipInputBucket") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_pipContentConfig") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe PipelineOutputConfig)) :*: S1 (MetaSel (Just "_pipOutputBucket") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 (MetaSel (Just "_pipRole") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_pipName") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_pipAWSKMSKeyARN") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 (MetaSel (Just "_pipId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 (MetaSel (Just "_pipNotifications") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Notifications)) :*: S1 (MetaSel (Just "_pipThumbnailConfig") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe PipelineOutputConfig)))))))

pipeline :: Pipeline

Creates a value of Pipeline with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• pipStatus - The current status of the pipeline: * Active : The pipeline is processing jobs. * Paused : The pipeline is not currently processing jobs.
• pipARN - The Amazon Resource Name (ARN) for the pipeline.
• pipInputBucket - The Amazon S3 bucket from which Elastic Transcoder gets media files for transcoding and the graphics files, if any, that you want to use for watermarks.
• pipContentConfig - Information about the Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. Either you specify both ContentConfig and ThumbnailConfig , or you specify OutputBucket . * Bucket : The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. * Permissions : A list of the users and/or predefined Amazon S3 groups you want to have access to transcoded files and playlists, and the type of access that you want them to have. * GranteeType: The type of value that appears in the Grantee object: * Canonical : Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. * Email : The registered email address of an AWS account. * Group : One of the following predefined Amazon S3 groups: AllUsers , AuthenticatedUsers , or LogDelivery . * Grantee : The AWS user or group that you want to have access to transcoded files and playlists. * Access : The permission that you want to give to the AWS user that is listed in Grantee . Valid values include: * READ : The grantee can read the objects and metadata for objects that Elastic Transcoder adds to the Amazon S3 bucket. * READ_ACP : The grantee can read the object ACL for objects that Elastic Transcoder adds to the Amazon S3 bucket. * WRITE_ACP : The grantee can write the ACL for the objects that Elastic Transcoder adds to the Amazon S3 bucket. * FULL_CONTROL : The grantee has READ , READ_ACP , and WRITE_ACP permissions for the objects that Elastic Transcoder adds to the Amazon S3 bucket. * StorageClass : The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the video files and playlists that it stores in your Amazon S3 bucket.
• pipOutputBucket - The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files, thumbnails, and playlists. Either you specify this value, or you specify both ContentConfig and ThumbnailConfig .
• pipRole - The IAM Amazon Resource Name (ARN) for the role that Elastic Transcoder uses to transcode jobs for this pipeline.
• pipName - The name of the pipeline. We recommend that the name be unique within the AWS account, but uniqueness is not enforced. Constraints: Maximum 40 characters
• pipAWSKMSKeyARN - The AWS Key Management Service (AWS KMS) key that you want to use with this pipeline. If you use either S3 or S3-AWS-KMS as your Encryption:Mode , you don't need to provide a key with your job because a default key, known as an AWS-KMS key, is created for you automatically. You need to provide an AWS-KMS key only if you want to use a non-default AWS-KMS key, or if you are using an Encryption:Mode of AES-PKCS7 , AES-CTR , or AES-GCM .
• pipId - The identifier for the pipeline. You use this value to identify the pipeline in which you want to perform a variety of operations, such as creating a job or a preset.
• pipNotifications - The Amazon Simple Notification Service (Amazon SNS) topic that you want to notify to report job status. Important: To receive notifications, you must also subscribe to the new topic in the Amazon SNS console. * Progressing (optional): The Amazon Simple Notification Service (Amazon SNS) topic that you want to notify when Elastic Transcoder has started to process the job. * Completed (optional): The Amazon SNS topic that you want to notify when Elastic Transcoder has finished processing the job. * Warning (optional): The Amazon SNS topic that you want to notify when Elastic Transcoder encounters a warning condition. * Error (optional): The Amazon SNS topic that you want to notify when Elastic Transcoder encounters an error condition.
• pipThumbnailConfig - Information about the Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files. Either you specify both ContentConfig and ThumbnailConfig , or you specify OutputBucket . * Bucket : The Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files. * Permissions : A list of the users andor predefined Amazon S3 groups you want to have access to thumbnail files, and the type of access that you want them to have. * GranteeType: The type of value that appears in the Grantee object: * Canonical : Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. Important:/ A canonical user ID is not the same as an AWS account number. * Email : The registered email address of an AWS account. * Group : One of the following predefined Amazon S3 groups: AllUsers , AuthenticatedUsers , or LogDelivery . * Grantee : The AWS user or group that you want to have access to thumbnail files. * Access: The permission that you want to give to the AWS user that is listed in Grantee. Valid values include: * READ : The grantee can read the thumbnails and metadata for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * READ_ACP : The grantee can read the object ACL for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * WRITE_ACP : The grantee can write the ACL for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * FULL_CONTROL : The grantee has READ, READ_ACP, and WRITE_ACP permissions for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. * StorageClass : The Amazon S3 storage class, Standard or ReducedRedundancy , that you want Elastic Transcoder to assign to the thumbnails that it stores in your Amazon S3 bucket.

pipStatus :: Lens' Pipeline (Maybe Text)

The current status of the pipeline: * Active : The pipeline is processing jobs. * Paused : The pipeline is not currently processing jobs.

pipARN :: Lens' Pipeline (Maybe Text)

The Amazon Resource Name (ARN) for the pipeline.

pipInputBucket :: Lens' Pipeline (Maybe Text)

The Amazon S3 bucket from which Elastic Transcoder gets media files for transcoding and the graphics files, if any, that you want to use for watermarks.

pipContentConfig :: Lens' Pipeline (Maybe PipelineOutputConfig)

Information about the Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. Either you specify both ContentConfig and ThumbnailConfig , or you specify OutputBucket . * Bucket : The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. * Permissions : A list of the users and/or predefined Amazon S3 groups you want to have access to transcoded files and playlists, and the type of access that you want them to have. * GranteeType: The type of value that appears in the Grantee object: * Canonical : Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. * Email : The registered email address of an AWS account. * Group : One of the following predefined Amazon S3 groups: AllUsers , AuthenticatedUsers , or LogDelivery . * Grantee : The AWS user or group that you want to have access to transcoded files and playlists. * Access : The permission that you want to give to the AWS user that is listed in Grantee . Valid values include: * READ : The grantee can read the objects and metadata for objects that Elastic Transcoder adds to the Amazon S3 bucket. * READ_ACP : The grantee can read the object ACL for objects that Elastic Transcoder adds to the Amazon S3 bucket. * WRITE_ACP : The grantee can write the ACL for the objects that Elastic Transcoder adds to the Amazon S3 bucket. * FULL_CONTROL : The grantee has READ , READ_ACP , and WRITE_ACP permissions for the objects that Elastic Transcoder adds to the Amazon S3 bucket. * StorageClass : The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the video files and playlists that it stores in your Amazon S3 bucket.

pipOutputBucket :: Lens' Pipeline (Maybe Text)

The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files, thumbnails, and playlists. Either you specify this value, or you specify both ContentConfig and ThumbnailConfig .

pipRole :: Lens' Pipeline (Maybe Text)