Network.AWS.Firehose.UpdateDestination

Updates the specified destination of the specified delivery stream.

Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes.

Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination.

If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the destination configuration that already exists on the delivery stream. If any of the parameters are not specified in the call, the existing values are retained. For example, in the Amazon S3 destination, if EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is maintained on the destination.

If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.

Kinesis Data Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting merges. This is a required field, and the service updates the configuration only if the existing configuration has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be retrieved using DescribeDeliveryStream . Use the new version ID to set CurrentDeliveryStreamVersionId in the next call.

Creating a Request

updateDestination

Arguments

:: Text

udDeliveryStreamName

-> Text

udCurrentDeliveryStreamVersionId

-> Text

udDestinationId

-> UpdateDestination

Creates a value of UpdateDestination with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• udSplunkDestinationUpdate - Describes an update for a destination in Splunk.
• udS3DestinationUpdate - [Deprecated] Describes an update for a destination in Amazon S3.
• udRedshiftDestinationUpdate - Describes an update for a destination in Amazon Redshift.
• udElasticsearchDestinationUpdate - Describes an update for a destination in Amazon ES.
• udExtendedS3DestinationUpdate - Describes an update for a destination in Amazon S3.
• udDeliveryStreamName - The name of the delivery stream.
• udCurrentDeliveryStreamVersionId - Obtain this value from the VersionId result of DeliveryStreamDescription . This value is required, and helps the service perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the VersionId value is updated. The service then performs a merge of the old configuration with the new configuration.
• udDestinationId - The ID of the destination.

data UpdateDestination

See: updateDestination smart constructor.

Instances

Eq UpdateDestination

Methods

(==) :: UpdateDestination -> UpdateDestination -> Bool

(/=) :: UpdateDestination -> UpdateDestination -> Bool

Data UpdateDestination

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> UpdateDestination -> c UpdateDestination

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c UpdateDestination

toConstr :: UpdateDestination -> Constr

dataTypeOf :: UpdateDestination -> DataType

dataCast1 :: Typeable (* -> *) t => (forall d. Data d => c (t d)) -> Maybe (c UpdateDestination)

dataCast2 :: Typeable (* -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c UpdateDestination)

gmapT :: (forall b. Data b => b -> b) -> UpdateDestination -> UpdateDestination

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestination -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestination -> r

gmapQ :: (forall d. Data d => d -> u) -> UpdateDestination -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> UpdateDestination -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> UpdateDestination -> m UpdateDestination

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestination -> m UpdateDestination

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestination -> m UpdateDestination

Show UpdateDestination

Methods

showsPrec :: Int -> UpdateDestination -> ShowS

show :: UpdateDestination -> String

showList :: [UpdateDestination] -> ShowS

Generic UpdateDestination

Associated Types

type Rep UpdateDestination :: * -> *

Methods

from :: UpdateDestination -> Rep UpdateDestination x

to :: Rep UpdateDestination x -> UpdateDestination

Hashable UpdateDestination

Methods

hashWithSalt :: Int -> UpdateDestination -> Int

hash :: UpdateDestination -> Int

ToJSON UpdateDestination

Methods

toJSON :: UpdateDestination -> Value

toEncoding :: UpdateDestination -> Encoding

toJSONList :: [UpdateDestination] -> Value

toEncodingList :: [UpdateDestination] -> Encoding

NFData UpdateDestination

Methods

rnf :: UpdateDestination -> ()

AWSRequest UpdateDestination

Associated Types

type Rs UpdateDestination :: *

Methods

request :: UpdateDestination -> Request UpdateDestination

response :: (MonadResource m, MonadThrow m) => Logger -> Service -> Proxy * UpdateDestination -> ClientResponse -> m (Response UpdateDestination)

ToHeaders UpdateDestination

Methods

toHeaders :: UpdateDestination -> [Header]

ToPath UpdateDestination

Methods

toPath :: UpdateDestination -> ByteString

ToQuery UpdateDestination

Methods

toQuery :: UpdateDestination -> QueryString

type Rep UpdateDestination

type Rep UpdateDestination = D1 * (MetaData "UpdateDestination" "Network.AWS.Firehose.UpdateDestination" "amazonka-kinesis-firehose-1.6.0-LQ2fZHJK53J4iOaqJbzMJD" False) (C1 * (MetaCons "UpdateDestination'" PrefixI True) ((:*:) * ((:*:) * ((:*:) * (S1 * (MetaSel (Just Symbol "_udSplunkDestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe SplunkDestinationUpdate))) (S1 * (MetaSel (Just Symbol "_udS3DestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe S3DestinationUpdate)))) ((:*:) * (S1 * (MetaSel (Just Symbol "_udRedshiftDestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe RedshiftDestinationUpdate))) (S1 * (MetaSel (Just Symbol "_udElasticsearchDestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe ElasticsearchDestinationUpdate))))) ((:*:) * ((:*:) * (S1 * (MetaSel (Just Symbol "_udExtendedS3DestinationUpdate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Maybe ExtendedS3DestinationUpdate))) (S1 * (MetaSel (Just Symbol "_udDeliveryStreamName") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * Text))) ((:*:) * (S1 * (MetaSel (Just Symbol "_udCurrentDeliveryStreamVersionId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * Text)) (S1 * (MetaSel (Just Symbol "_udDestinationId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * Text))))))

type Rs UpdateDestination

type Rs UpdateDestination = UpdateDestinationResponse

Request Lenses

udSplunkDestinationUpdate :: Lens' UpdateDestination (Maybe SplunkDestinationUpdate)

Describes an update for a destination in Splunk.

udS3DestinationUpdate :: Lens' UpdateDestination (Maybe S3DestinationUpdate)

Deprecated

Describes an update for a destination in Amazon S3.

udRedshiftDestinationUpdate :: Lens' UpdateDestination (Maybe RedshiftDestinationUpdate)

Describes an update for a destination in Amazon Redshift.

udElasticsearchDestinationUpdate :: Lens' UpdateDestination (Maybe ElasticsearchDestinationUpdate)

Describes an update for a destination in Amazon ES.

udExtendedS3DestinationUpdate :: Lens' UpdateDestination (Maybe ExtendedS3DestinationUpdate)

Describes an update for a destination in Amazon S3.

udDeliveryStreamName :: Lens' UpdateDestination Text

The name of the delivery stream.

udCurrentDeliveryStreamVersionId :: Lens' UpdateDestination Text

Obtain this value from the VersionId result of DeliveryStreamDescription . This value is required, and helps the service perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the VersionId value is updated. The service then performs a merge of the old configuration with the new configuration.

udDestinationId :: Lens' UpdateDestination Text

The ID of the destination.

Destructuring the Response

updateDestinationResponse

Arguments

:: Int

udrsResponseStatus

-> UpdateDestinationResponse

Creates a value of UpdateDestinationResponse with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• udrsResponseStatus - -- | The response status code.

data UpdateDestinationResponse

See: updateDestinationResponse smart constructor.

Instances

Eq UpdateDestinationResponse

Methods

(==) :: UpdateDestinationResponse -> UpdateDestinationResponse -> Bool

(/=) :: UpdateDestinationResponse -> UpdateDestinationResponse -> Bool

Data UpdateDestinationResponse

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> UpdateDestinationResponse -> c UpdateDestinationResponse

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c UpdateDestinationResponse

toConstr :: UpdateDestinationResponse -> Constr

dataTypeOf :: UpdateDestinationResponse -> DataType

dataCast1 :: Typeable (* -> *) t => (forall d. Data d => c (t d)) -> Maybe (c UpdateDestinationResponse)

dataCast2 :: Typeable (* -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c UpdateDestinationResponse)

gmapT :: (forall b. Data b => b -> b) -> UpdateDestinationResponse -> UpdateDestinationResponse

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestinationResponse -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> UpdateDestinationResponse -> r

gmapQ :: (forall d. Data d => d -> u) -> UpdateDestinationResponse -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> UpdateDestinationResponse -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> UpdateDestinationResponse -> m UpdateDestinationResponse

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestinationResponse -> m UpdateDestinationResponse

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> UpdateDestinationResponse -> m UpdateDestinationResponse

Read UpdateDestinationResponse

Methods

readsPrec :: Int -> ReadS UpdateDestinationResponse

readList :: ReadS [UpdateDestinationResponse]

readPrec :: ReadPrec UpdateDestinationResponse

readListPrec :: ReadPrec [UpdateDestinationResponse]

Show UpdateDestinationResponse

Methods

showsPrec :: Int -> UpdateDestinationResponse -> ShowS

show :: UpdateDestinationResponse -> String

showList :: [UpdateDestinationResponse] -> ShowS

Generic UpdateDestinationResponse

Associated Types

type Rep UpdateDestinationResponse :: * -> *

Methods

from :: UpdateDestinationResponse -> Rep UpdateDestinationResponse x

to :: Rep UpdateDestinationResponse x -> UpdateDestinationResponse

NFData UpdateDestinationResponse

Methods

rnf :: UpdateDestinationResponse -> ()

type Rep UpdateDestinationResponse

type Rep UpdateDestinationResponse = D1 * (MetaData "UpdateDestinationResponse" "Network.AWS.Firehose.UpdateDestination" "amazonka-kinesis-firehose-1.6.0-LQ2fZHJK53J4iOaqJbzMJD" True) (C1 * (MetaCons "UpdateDestinationResponse'" PrefixI True) (S1 * (MetaSel (Just Symbol "_udrsResponseStatus") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 * Int)))

Response Lenses

udrsResponseStatus :: Lens' UpdateDestinationResponse Int

• - | The response status code.