Network.AWS.Route53.CreateQueryLoggingConfig

Creates a configuration for DNS query logging. After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group.

DNS query logs contain information about the queries that Amazon Route 53 receives for a specified public hosted zone, such as the following:

• Amazon Route 53 edge location that responded to the DNS query
• Domain or subdomain that was requested
• DNS record type, such as A or AAAA
• DNS response code, such as NoError or ServFail
• Log Group and Resource Policy * Before you create a query logging configuration, perform the following operations.
• Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following:
• You must create the log group in the us-east-1 region.
• You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for.
• When you create log groups for query logging, we recommend that you use a consistent prefix, for example:

awsroute53/hosted zone name

In the next step, you'll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Amazon Route 53 hosted zones. There's a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging.

• Create a CloudWatch Logs resource policy, and give it the permissions that Amazon Route 53 needs to create log streams and to to send query logs to log streams. For the value of Resource , specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with * , for example:

arn:aws:logs:us-east-1:123412341234:log-group:awsroute53/*

• Log Streams and Edge Locations * When Amazon Route 53 finishes creating the configuration for DNS query logging, it does the following:
• Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Amazon Route 53 responds to for that edge location.
• Begins to send query logs to the applicable log stream.

The name of each log stream is in the following format:

hosted zone ID /edge location code

The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations, see "The Amazon Route 53 Global Network" on the Amazon Route 53 Product Details page.

• Queries That Are Logged * Query logs contain only the queries that DNS resolvers forward to Amazon Route 53. If a DNS resolver has already cached the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue to return the cached response. It doesn't forward another query to Amazon Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see Routing Internet Traffic to Your Website or Web Application in the Amazon Route 53 Developer Guide .
• Log File Format * For a list of the values in each query log and the format of each value, see Logging DNS Queries in the Amazon Route 53 Developer Guide .
• Pricing * For information about charges for query logs, see Amazon CloudWatch Pricing .
• How to Stop Logging * If you want Amazon Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see DeleteQueryLoggingConfig .

Creating a Request

createQueryLoggingConfig

Arguments

:: ResourceId

cqlcHostedZoneId

-> Text

cqlcCloudWatchLogsLogGroupARN

-> CreateQueryLoggingConfig

Creates a value of CreateQueryLoggingConfig with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cqlcHostedZoneId - The ID of the hosted zone that you want to log queries for. You can log queries only for public hosted zones.
• cqlcCloudWatchLogsLogGroupARN - The Amazon Resource Name (ARN) for the log group that you want to Amazon Route 53 to send query logs to. This is the format of the ARN: arn:aws:logs:region :account-id :log-group:log_group_name To get the ARN for a log group, you can use the CloudWatch console, the DescribeLogGroups API action, the describe-log-groups command, or the applicable command in one of the AWS SDKs.

data CreateQueryLoggingConfig

See: createQueryLoggingConfig smart constructor.

Instances

Eq CreateQueryLoggingConfig

Methods

(==) :: CreateQueryLoggingConfig -> CreateQueryLoggingConfig -> Bool

(/=) :: CreateQueryLoggingConfig -> CreateQueryLoggingConfig -> Bool

Data CreateQueryLoggingConfig

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CreateQueryLoggingConfig -> c CreateQueryLoggingConfig

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CreateQueryLoggingConfig

toConstr :: CreateQueryLoggingConfig -> Constr

dataTypeOf :: CreateQueryLoggingConfig -> DataType

dataCast1 :: Typeable (* -> *) t => (forall d. Data d => c (t d)) -> Maybe (c CreateQueryLoggingConfig)

dataCast2 :: Typeable (* -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CreateQueryLoggingConfig)

gmapT :: (forall b. Data b => b -> b) -> CreateQueryLoggingConfig -> CreateQueryLoggingConfig

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CreateQueryLoggingConfig -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CreateQueryLoggingConfig -> r

gmapQ :: (forall d. Data d => d -> u) -> CreateQueryLoggingConfig -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CreateQueryLoggingConfig -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CreateQueryLoggingConfig -> m CreateQueryLoggingConfig

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateQueryLoggingConfig -> m CreateQueryLoggingConfig

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateQueryLoggingConfig -> m CreateQueryLoggingConfig

Read CreateQueryLoggingConfig

Methods

readsPrec :: Int -> ReadS CreateQueryLoggingConfig

readList :: ReadS [CreateQueryLoggingConfig]

readPrec :: ReadPrec CreateQueryLoggingConfig

readListPrec :: ReadPrec [CreateQueryLoggingConfig]

Show CreateQueryLoggingConfig

Methods

showsPrec :: Int -> CreateQueryLoggingConfig -> ShowS

show :: CreateQueryLoggingConfig -> String

showList :: [CreateQueryLoggingConfig] -> ShowS

Generic CreateQueryLoggingConfig

Associated Types

type Rep CreateQueryLoggingConfig :: * -> *

Methods

from :: CreateQueryLoggingConfig -> Rep CreateQueryLoggingConfig x

to :: Rep CreateQueryLoggingConfig x -> CreateQueryLoggingConfig

Hashable CreateQueryLoggingConfig

Methods

hashWithSalt :: Int -> CreateQueryLoggingConfig -> Int

hash :: CreateQueryLoggingConfig -> Int

NFData CreateQueryLoggingConfig

Methods

rnf :: CreateQueryLoggingConfig -> ()

AWSRequest CreateQueryLoggingConfig

Associated Types

type Rs CreateQueryLoggingConfig :: *

Methods

request :: CreateQueryLoggingConfig -> Request CreateQueryLoggingConfig

response :: MonadResource m => Logger -> Service -> Proxy * CreateQueryLoggingConfig -> ClientResponse -> m (Response CreateQueryLoggingConfig)

ToElement CreateQueryLoggingConfig

Methods

toElement :: CreateQueryLoggingConfig -> Element

ToXML CreateQueryLoggingConfig

Methods

toXML :: CreateQueryLoggingConfig -> XML

ToQuery CreateQueryLoggingConfig

Methods

toQuery :: CreateQueryLoggingConfig -> QueryString

ToPath CreateQueryLoggingConfig

Methods

toPath :: CreateQueryLoggingConfig -> ByteString

ToHeaders CreateQueryLoggingConfig

Methods

toHeaders :: CreateQueryLoggingConfig -> [Header]

type Rep CreateQueryLoggingConfig

type Rep CreateQueryLoggingConfig = D1 (MetaData "CreateQueryLoggingConfig" "Network.AWS.Route53.CreateQueryLoggingConfig" "amazonka-route53-1.5.0-A9em4xt2RK07uc01kiXLe0" False) (C1 (MetaCons "CreateQueryLoggingConfig'" PrefixI True) ((:*:) (S1 (MetaSel (Just Symbol "_cqlcHostedZoneId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 ResourceId)) (S1 (MetaSel (Just Symbol "_cqlcCloudWatchLogsLogGroupARN") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Text))))

type Rs CreateQueryLoggingConfig

type Rs CreateQueryLoggingConfig = CreateQueryLoggingConfigResponse

Request Lenses

cqlcHostedZoneId :: Lens' CreateQueryLoggingConfig ResourceId

The ID of the hosted zone that you want to log queries for. You can log queries only for public hosted zones.

cqlcCloudWatchLogsLogGroupARN :: Lens' CreateQueryLoggingConfig Text

The Amazon Resource Name (ARN) for the log group that you want to Amazon Route 53 to send query logs to. This is the format of the ARN: arn:aws:logs:region :account-id :log-group:log_group_name To get the ARN for a log group, you can use the CloudWatch console, the DescribeLogGroups API action, the describe-log-groups command, or the applicable command in one of the AWS SDKs.

Destructuring the Response

createQueryLoggingConfigResponse

Arguments

:: Int

cqlcrsResponseStatus

-> QueryLoggingConfig

cqlcrsQueryLoggingConfig

-> Text

cqlcrsLocation

-> CreateQueryLoggingConfigResponse

Creates a value of CreateQueryLoggingConfigResponse with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cqlcrsResponseStatus - -- | The response status code.
• cqlcrsQueryLoggingConfig - A complex type that contains the ID for a query logging configuration, the ID of the hosted zone that you want to log queries for, and the ARN for the log group that you want Amazon Route 53 to send query logs to.
• cqlcrsLocation - The unique URL representing the new query logging configuration.

data CreateQueryLoggingConfigResponse

See: createQueryLoggingConfigResponse smart constructor.

Instances

Eq CreateQueryLoggingConfigResponse

Methods

(==) :: CreateQueryLoggingConfigResponse -> CreateQueryLoggingConfigResponse -> Bool

(/=) :: CreateQueryLoggingConfigResponse -> CreateQueryLoggingConfigResponse -> Bool

Data CreateQueryLoggingConfigResponse

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CreateQueryLoggingConfigResponse -> c CreateQueryLoggingConfigResponse

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CreateQueryLoggingConfigResponse

toConstr :: CreateQueryLoggingConfigResponse -> Constr

dataTypeOf :: CreateQueryLoggingConfigResponse -> DataType

dataCast1 :: Typeable (* -> *) t => (forall d. Data d => c (t d)) -> Maybe (c CreateQueryLoggingConfigResponse)

dataCast2 :: Typeable (* -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CreateQueryLoggingConfigResponse)

gmapT :: (forall b. Data b => b -> b) -> CreateQueryLoggingConfigResponse -> CreateQueryLoggingConfigResponse

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CreateQueryLoggingConfigResponse -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CreateQueryLoggingConfigResponse -> r

gmapQ :: (forall d. Data d => d -> u) -> CreateQueryLoggingConfigResponse -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CreateQueryLoggingConfigResponse -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CreateQueryLoggingConfigResponse -> m CreateQueryLoggingConfigResponse

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateQueryLoggingConfigResponse -> m CreateQueryLoggingConfigResponse

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateQueryLoggingConfigResponse -> m CreateQueryLoggingConfigResponse

Read CreateQueryLoggingConfigResponse

Methods

readsPrec :: Int -> ReadS CreateQueryLoggingConfigResponse

readList :: ReadS [CreateQueryLoggingConfigResponse]

readPrec :: ReadPrec CreateQueryLoggingConfigResponse

readListPrec :: ReadPrec [CreateQueryLoggingConfigResponse]

Show CreateQueryLoggingConfigResponse

Methods

showsPrec :: Int -> CreateQueryLoggingConfigResponse -> ShowS

show :: CreateQueryLoggingConfigResponse -> String

showList :: [CreateQueryLoggingConfigResponse] -> ShowS

Generic CreateQueryLoggingConfigResponse

Associated Types

type Rep CreateQueryLoggingConfigResponse :: * -> *

Methods

from :: CreateQueryLoggingConfigResponse -> Rep CreateQueryLoggingConfigResponse x

to :: Rep CreateQueryLoggingConfigResponse x -> CreateQueryLoggingConfigResponse

NFData CreateQueryLoggingConfigResponse

Methods

rnf :: CreateQueryLoggingConfigResponse -> ()

type Rep CreateQueryLoggingConfigResponse

type Rep CreateQueryLoggingConfigResponse = D1 (MetaData "CreateQueryLoggingConfigResponse" "Network.AWS.Route53.CreateQueryLoggingConfig" "amazonka-route53-1.5.0-A9em4xt2RK07uc01kiXLe0" False) (C1 (MetaCons "CreateQueryLoggingConfigResponse'" PrefixI True) ((:*:) (S1 (MetaSel (Just Symbol "_cqlcrsResponseStatus") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Int)) ((:*:) (S1 (MetaSel (Just Symbol "_cqlcrsQueryLoggingConfig") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 QueryLoggingConfig)) (S1 (MetaSel (Just Symbol "_cqlcrsLocation") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Text)))))

Response Lenses

cqlcrsResponseStatus :: Lens' CreateQueryLoggingConfigResponse Int

• - | The response status code.

cqlcrsQueryLoggingConfig :: Lens' CreateQueryLoggingConfigResponse QueryLoggingConfig

A complex type that contains the ID for a query logging configuration, the ID of the hosted zone that you want to log queries for, and the ARN for the log group that you want Amazon Route 53 to send query logs to.

cqlcrsLocation :: Lens' CreateQueryLoggingConfigResponse Text

The unique URL representing the new query logging configuration.