Copilot.Arduino.Library.Serial.XBee

XBee serial library for arduino-copilot.

This module is designed to be imported qualified as XBee

Documentation

newtype Baud

Constructors

Baud Int

Instances

Eq Baud

Defined in Copilot.Arduino.Library.Serial.Device

Methods

(==) :: Baud -> Baud -> Bool

(/=) :: Baud -> Baud -> Bool

Show Baud

Defined in Copilot.Arduino.Library.Serial.Device

Methods

showsPrec :: Int -> Baud -> ShowS

show :: Baud -> String

showList :: [Baud] -> ShowS

configure

Arguments

:: (IsDigitalIOPin rx, IsDigitalIOPin tx)

=> Pin rx

pin on which to receive serial data

-> Pin tx

pin on which to send serial data

-> Baud

-> Sketch ()

Configure the XBee device.

This must be included in your sketch if it uses XBee.

XBee.configure pin2 pin3 (XBee.Baud 9600)

device :: SerialDevice

Use this to communicate with the XBee, both input and output.

To output to the XBee, simply connect this to a [FormatOutput] that describes the serial output. Note that you can only do this once in a Sketch.

main = arduino $ do
   XBee.configure pin2 pin3 (XBee.Baud 9600)
	b <- input pin4
	XBee.device =:
		[ Serial.str "pin4:"
		, Serial.show b
		, Serial.char '\n'
		]

To input from the XBee, use this with input.

userinput <- input XBee.device

The resulting `Behavior Int8` will be updated on each iteration of the sketch. When there is no new serial input available, it will contain noInput.

char :: Char -> FormatOutput

Use this to output a Char.

str :: OutputString t => t -> FormatOutput

Use this to output a String or FlashString

newtype FlashString

Normally a String will be copied into ram before it is output. A FlashString will be output directly from flash memory.

Using this with str will reduce the amount of memory used by your program, but will likely slightly increase the size of the program.

Constructors

FlashString String

Instances

OutputString FlashString

Defined in Copilot.Arduino.Library.Serial.Device

Methods

str :: FlashString -> FormatOutput

show :: forall t. (ShowCType t, Typed t) => Stream t -> FormatOutput

Use this to show the current value of a Stream.

Numbers will be formatted in decimal. Bool is displayed as 0 and 1.

showFormatted :: forall t f. (ShowCType t, Typed t, FormatableType t f) => Stream t -> f -> FormatOutput

Show the current value of a Stream with control over the formatting.

When used with a Float, provide the number of decimal places to show.

Serial.showFormatted (constant (1.234 :: Float)) 2 -- "1.23"

When used with any Integral type, provide the Base to display it in

Serial.showFormatted (constant (78 :: Int8)) Serial.HEX -- "4E"

byte :: Stream Int8 -> FormatOutput

Write a byte to the serial port.

noInput :: Int8

Value that is read from serial port when there is no input available.

data SerialDevice

Instances

Input SerialDevice Int8

Defined in Copilot.Arduino.Library.Serial.Device

Methods

input' :: SerialDevice -> [Int8] -> Sketch (Behavior Int8)

Output SerialDevice [FormatOutput]

Defined in Copilot.Arduino.Library.Serial.Device

Methods

(=:) :: SerialDevice -> [FormatOutput] -> Sketch ()

Output SerialDevice (Event () [FormatOutput])

Defined in Copilot.Arduino.Library.Serial.Device

Methods

(=:) :: SerialDevice -> Event () [FormatOutput] -> Sketch ()

data FormatOutput

Instances

Output SerialDevice [FormatOutput]

Defined in Copilot.Arduino.Library.Serial.Device

Methods

(=:) :: SerialDevice -> [FormatOutput] -> Sketch ()

Output SerialDevice (Event () [FormatOutput])

Defined in Copilot.Arduino.Library.Serial.Device

Methods

(=:) :: SerialDevice -> Event () [FormatOutput] -> Sketch ()

IsBehavior [FormatOutput]

Defined in Copilot.Arduino.Library.Serial.Device

Methods

(@:) :: [FormatOutput] -> Behavior Bool -> BehaviorToEvent [FormatOutput]

type BehaviorToEvent [FormatOutput]

Defined in Copilot.Arduino.Library.Serial.Device

type BehaviorToEvent [FormatOutput] = Event () [FormatOutput]

class OutputString t

Minimal complete definition

str

Instances

OutputString String

Defined in Copilot.Arduino.Library.Serial.Device

Methods

str :: String -> FormatOutput

OutputString FlashString

Defined in Copilot.Arduino.Library.Serial.Device

Methods

str :: FlashString -> FormatOutput

class FormatableType t f

Minimal complete definition

formatter

Instances

FormatableType Float Int

Defined in Copilot.Arduino.Library.Serial.Device

Methods

formatter :: Proxy Float -> Int -> String

Integral t => FormatableType (t :: Type) Base

Defined in Copilot.Arduino.Library.Serial.Device

Methods

formatter :: Proxy t -> Base -> String

data Base

Constructors

BIN

OCT

DEC

HEX

Instances

Show Base

Defined in Copilot.Arduino.Library.Serial.Device

Methods

showsPrec :: Int -> Base -> ShowS

show :: Base -> String

showList :: [Base] -> ShowS

Integral t => FormatableType (t :: Type) Base

Defined in Copilot.Arduino.Library.Serial.Device

Methods

formatter :: Proxy t -> Base -> String