easytest-0.2.1: Simple, expressive testing library

Copyright(c) Joel Burget 2018
LicenseMIT
Maintainerjoelburget@gmail.com
Stabilityprovisional
Safe HaskellNone
LanguageHaskell98

EasyTest

Contents

Description

EasyTest is a simple testing toolkit, meant to replace most uses of QuickCheck, SmallCheck, HUnit, and frameworks like Tasty, etc. Here's an example usage:

module Main where

import EasyTest
import Control.Applicative
import Control.Monad

suite :: Test ()
suite = tests
  [ scope "addition.ex1" $ expect (1 + 1 == 2)
  , scope "addition.ex2" $ expect (2 + 3 == 5)
  , scope "list.reversal" . fork $ do
      -- generate lists from size 0 to 10, of Ints in (0,43)
      -- shorthand: listsOf [0..10] (int' 0 43)
      ns <- [0..10] `forM` \n -> replicateM n (int' 0 43)
      ns `forM_` \ns -> expect (reverse (reverse ns) == ns)
  -- equivalent to `scope "addition.ex3"`
  , scope "addition" . scope "ex3" $ expect (3 + 3 == 6)
  , scope "always passes" $ do
      note "I'm running this test, even though it always passes!"
      ok -- like `pure ()`, but records a success result
  , scope "failing test" $ crash "oh noes!!" ]

-- NB: `run suite` would run all tests, but we only run
-- tests whose scopes are prefixed by "addition"
main = runOnly "addition" suite

This generates the output:

Randomness seed for this run is 5104092164859451056
Raw test output to follow ...
------------------------------------------------------------
OK addition.ex1
OK addition.ex2
OK addition.ex3
------------------------------------------------------------
✅  3 tests passed, no failures! 👍 🎉

The idea here is to write tests with ordinary Haskell code, with control flow explicit and under programmer control. Tests are values of type Test a, and Test forms a monad with access to:

  • repeatable randomness (the random and random' functions for random and bounded random values, or handy specialized int, int', double, double', etc)
  • I/O (via liftIO or EasyTest.io, which is an alias for liftIO)
  • failure (via crash, which yields a stack trace, or fail, which does not)
  • logging (via note, noteScoped, or note')
  • hierarchically-named subcomputations which can be switched on and off (in the above code, notice that only the tests scoped under "addition" are run, and we could do run instead of runOnly if we wanted to run the whole suite)
  • parallelism (note the fork which runs that subtree of the test suite in a parallel thread).
  • conjunction of tests via MonadPlus (the | operation runs both tests, even if the first test fails, and the tests function used above is just msum).
  • Using any or all of these capabilities, you assemble Test values into a "test suite" (just another Test value) using ordinary Haskell code, not framework magic. Notice that to generate a list of random values, we just replicateM and forM as usual. If this gets tedious... we can factor this logic out into helper functions! For instance:
listOf :: Int -> Test a -> Test [a]
listOf = replicateM

listsOf :: [Int] -> Test a -> Test [[a]]
listsOf sizes gen = sizes `forM` \n -> listOf n gen

ex :: Test ()
ex = do
  ns <- listsOf [0..100] int
  ns `forM_` \ns -> expect (reverse (reverse ns) == ns)
This library is opinionated and might not be for everyone. If you're curious about any of the design decisions made, see my rationale for writing it.

User guide

The simplest tests are ok, crash, and expect:

-- Record a success
ok :: Test ()

-- Record a failure
crash :: String -> Test a

-- Record a success if True, otherwise record a failure
expect :: Bool -> Test ()

NB: fail is equivalent to crash, but doesn't provide a stack trace on failure.

We can lift I/O into Test using io (or liftIO, but I always forget where to import that from):

io :: IO a -> Test a

Test is also a Monad. Note that return and pure do not record a result. Use ok, expect, or crash for that purpose.

We often want to label tests so we can see when they succeed or fail. For that we use scope:

-- | Label a test. Can be nested. A `'.'` is placed between nested
-- scopes, so `scope "foo" . scope "bar"` is equivalent to `scope "foo.bar"`
scope :: String -> Test a -> Test a

Here's an example usage, putting all these primitives together:

module Main where

import EasyTest (ok, scope, crash, expect, run)

suite :: Test ()
suite = do
  ok
  scope "test-crash" $ crash "oh noes!"
  expect (1 + 1 == 2)

main = run suite

This example is sequencing the ok, crash, and expect monadically, so the test halts at the first failure. The output is:

Randomness seed for this run is 1830293182471192517
Raw test output to follow ...
------------------------------------------------------------
test-crash FAILURE oh noes! CallStack (from HasCallStack):
  crash, called at /Users/pchiusano/code/easytest/tests/Suite.hs:10:24 in main:Main
OK
FAILED test-crash
------------------------------------------------------------


  1 passed
  1 FAILED (failed scopes below)
    "test-crash"

  To rerun with same random seed:

    EasyTest.rerun 1830293182471192517
    EasyTest.rerunOnly 1830293182471192517 "test-crash"


------------------------------------------------------------
❌

In the output (which is streamed to the console), we get a stack trace pointing to the line where crash was called (..tests/Suite.hs:10:24), information about failing tests, and instructions for rerunning the tests with an identical random seed (in this case, there's no randomness, so rerun would work fine, but if our test generated random data, we might want to rerun with the exact same random numbers).

The last line of the output always indicates success or failure of the overall suite... and information about any failing tests is immediately above that. You should NEVER have to scroll through a bunch of test output just to find out which tests actually failed! Also, the streaming output always has OK or FAILED as the leftmost text for ease of scanning.

If you try running a test suite that has no results recorded (like if you have a typo in a call to runOnly, or you forget to use ok or expect to record a test result), you'll see a warning like this:

😶  hmm ... no test results recorded
Tip: use `ok`, `expect`, or `crash` to record results
Tip: if running via `runOnly` or `rerunOnly`, check for typos

The various run functions (run, runOnly, rerun, and rerunOnly) all exit the process with a nonzero status in the event of a failure, so they can be used for continuous integration or test running tools that key off the process exit code to determine whether the suite succeeded or failed. For instance, here's the relevant portion of a typical cabal file:

-- Preferred way to run EasyTest-based test suite
executable runtests
  main-is:        NameOfYourTestSuite.hs
  ghc-options:    -w -threaded -rtsopts -with-rtsopts=-N -v0
  hs-source-dirs: tests
  other-modules:
  build-depends:
    base,
    easytest

-- I really have no idea why you'd ever use this, unless you
-- really feel the need to run your tests via cabal's "test runner"
-- which "conveniently" hides all output unless you pass it some
-- random flag I never remember
test-suite tests
  type:           exitcode-stdio-1.0
  main-is:        NameOfYourTestSuite.hs
  ghc-options:    -w -threaded -rtsopts -with-rtsopts=-N -v0
  hs-source-dirs: tests
  other-modules:
  build-depends:
    base,
    easytest

For tests that are logically separate, we usually combine them into a suite using tests (which is just msum), as in:

suite = tests
  [ scope "ex1" $ expect (1 + 1 == 2)
  , scope "ex2" $ expect (2 + 2 == 4) ]

-- equivalently
suite =
  (scope "ex1" $ expect (1 + 1 == 2)) <|>
  (scope "ex2" $ expect (2 + 2 == 4))

Importantly, each branch of a <|> or tests gets its own copy of the randomness source, so even when branches of the test suite are switched on or off, the randomness received by a branch is the same. This is important for being able to quickly iterate on a test failure!

Sometimes, tests take a while to run and we want to make use of parallelism. For that, use EasyTest.fork or fork':

-- | Run a test in a separate thread, not blocking for its result.
fork :: Test a -> Test ()

-- | Run a test in a separate thread, not blocking for its result, but
-- return a future which can be used to block on the result.
fork' :: Test a -> Test (Test a)

Note: There's no "framework global" parallelism configuration setting.

We often want to generate random data for testing purposes:

reverseTest :: Test ()
reverseTest = scope "list reversal" $ do
  nums <- listsOf [0..100] (int' 0 99)
  nums forM_ nums -> expect (reverse (reverse nums) == nums)

Tip: generate your test cases in order of increasing size. If you get a failure, your test case is closer to "minimal".

The above code generates lists of sizes 0 through 100, consisting of Int values in the range 0 through 99. int' :: Int -> Int -> Test Int, and there are analogous functions for Double, Word, etc. The most general functions are:

random :: Random a => Test a
random' :: Random a => a -> a -> Test a

The functions int, char, bool, double, etc are just specialized aliases for random, and int', char', etc are just aliases for random'. The aliases are sometimes useful in situations where use of the generic random or random' would require type annotations.

If our list reversal test failed, we might use runOnly "list reversal" or rerunOnly <randomseed> "list reversal" to rerun just that subtree of the test suite, and we might add some additional diagnostics to see what was going on:

reverseTest :: Test ()
reverseTest = scope "list reversal" $ do
  nums <- listsOf [0..100] (int' 0 99)
  nums forM_ nums -> do
    note $ "nums: " ++ show nums
    let r = reverse (reverse nums)
    note $ "reverse (reverse nums): " ++ show r
    expect (r == nums)

The idea is that these sorts of detailed diagnostics are added lazily (and temporarily) to find and fix failing tests. You can also add diagnostics via io (putStrLn "blah"), but if you have tests running in parallel this can sometimes get confusing.

That's it! Just use ordinary monadic code to generate any testing data and to run your tests.

Synopsis

Tests

data Test a Source #

Tests are values of type Test a, and Test forms a monad with access to:

  • repeatable randomness (the random and random' functions for random and bounded random values, or handy specialized int, int', double, double', etc)
  • I/O (via liftIO or io, which is an alias for liftIO)
  • failure (via crash, which yields a stack trace, or fail, which does not)
  • logging (via note, noteScoped, or note')
  • hierarchically-named subcomputations (under scope) which can be switched on and off via runOnly
  • parallelism (via fork)
  • conjunction of tests via MonadPlus (the <|> operation runs both tests, even if the first test fails, and the tests function used above is just msum).

Using any or all of these capabilities, you assemble Test values into a "test suite" (just another Test value) using ordinary Haskell code, not framework magic. Notice that to generate a list of random values, we just replicateM and forM as usual.

Instances
Monad Test Source # 
Instance details

Defined in EasyTest.Internal

Methods

(>>=) :: Test a -> (a -> Test b) -> Test b #

(>>) :: Test a -> Test b -> Test b #

return :: a -> Test a #

fail :: String -> Test a #

Functor Test Source # 
Instance details

Defined in EasyTest.Internal

Methods

fmap :: (a -> b) -> Test a -> Test b #

(<$) :: a -> Test b -> Test a #

Applicative Test Source # 
Instance details

Defined in EasyTest.Internal

Methods

pure :: a -> Test a #

(<*>) :: Test (a -> b) -> Test a -> Test b #

liftA2 :: (a -> b -> c) -> Test a -> Test b -> Test c #

(*>) :: Test a -> Test b -> Test b #

(<*) :: Test a -> Test b -> Test a #

MonadIO Test Source # 
Instance details

Defined in EasyTest.Internal

Methods

liftIO :: IO a -> Test a #

Alternative Test Source # 
Instance details

Defined in EasyTest.Internal

Methods

empty :: Test a #

(<|>) :: Test a -> Test a -> Test a #

some :: Test a -> Test [a] #

many :: Test a -> Test [a] #

MonadPlus Test Source # 
Instance details

Defined in EasyTest.Internal

Methods

mzero :: Test a #

mplus :: Test a -> Test a -> Test a #

MonadReader Env Test Source # 
Instance details

Defined in EasyTest.Internal

Methods

ask :: Test Env #

local :: (Env -> Env) -> Test a -> Test a #

reader :: (Env -> a) -> Test a #

IsString (Test a -> Test a) Source # 
Instance details

Defined in EasyTest.Internal

Methods

fromString :: String -> Test a -> Test a #

expectEq :: (Eq a, Show a, HasCallStack) => a -> a -> Test () Source #

tests :: [Test ()] -> Test () Source #

Run a list of tests

This specializes msum, asum, and sequence_.

using :: IO r -> (r -> IO ()) -> (r -> Test a) -> Test a Source #

A test with a setup and teardown

runOnly :: Text -> Test a -> IO () Source #

Run all tests whose scope starts with the given prefix

rerunOnly :: Int -> Text -> Test a -> IO () Source #

Rerun all tests with the given seed and whose scope starts with the given prefix

run :: Test a -> IO () Source #

Run all tests

rerun :: Int -> Test a -> IO () Source #

Rerun all tests with the given seed

scope :: Text -> Test a -> Test a Source #

Label a test. Can be nested. A "." is placed between nested scopes, so scope "foo" . scope "bar" is equivalent to scope "foo.bar"

note' :: Show s => s -> Test () Source #

Log a showable value

ok :: Test () Source #

Record a successful test at the current scope

skip :: Test () Source #

Explicitly skip this test

fork :: Test a -> Test () Source #

Run a test in a separate thread, not blocking for its result.

fork' :: Test a -> Test (Test a) Source #

Run a test in a separate thread, return a future which can be used to block on its result.

crash :: HasCallStack => Text -> Test a Source #

Record a failure at the current scope

note :: Text -> Test () Source #

Log a message

io :: IO a -> Test a Source #

Convenient alias for liftIO

Generators

random :: forall a. Random a => Test a Source #

Generate a random value

random' :: Random a => a -> a -> Test a Source #

Generate a bounded random value. Inclusive on both sides.

char :: Test Char Source #

Generate a random Char

int :: Test Int Source #

Generate a random Int

double :: Test Double Source #

Generate a random Double

word :: Test Word Source #

Generate a random Word

int' :: Int -> Int -> Test Int Source #

Generate a random Int in the given range Note: int' 0 5 includes both 0 and 5

char' :: Char -> Char -> Test Char Source #

Generate a random Char in the given range Note: char' a z includes both a and z.

double' :: Double -> Double -> Test Double Source #

Generate a random Double in the given range Note: double' 0 1 includes both 0 and 1.

word' :: Word -> Word -> Test Word Source #

Generate a random Double in the given range Note: word' 0 10 includes both 0 and 10.

word8' :: Word8 -> Word8 -> Test Word8 Source #

Generate a random Double in the given range Note: word8' 0 10 includes both 0 and 10.

pick :: [a] -> Test a Source #

Sample uniformly from the given list of possibilities

listOf :: Int -> Test a -> Test [a] Source #

Alias for replicateM

listsOf :: [Int] -> Test a -> Test [[a]] Source #

Generate a list of lists of the given sizes, an alias for sizes `forM` \n -> listOf n gen

pair :: Test a -> Test b -> Test (a, b) Source #

Alias for liftA2 (,).

mapOf :: Ord k => Int -> Test k -> Test v -> Test (Map k v) Source #

Generate a Data.Map k v of the given size.

mapsOf :: Ord k => [Int] -> Test k -> Test v -> Test [Map k v] Source #

Generate a [Data.Map k v] of the given sizes.