{-# LANGUAGE GeneralizedNewtypeDeriving #-}

{-|

This version differs from the simple one in adding associated freeze
control signals (\'clocks\') to stateful entities to be able to pause
entire subnetworks without having to write all the low-level logic
explicitly.  The clocks are fixed to signals upon their creation, and
the 'withClock' function can be used to specify the common clock for
the signals created in a given generator.

A clock signal affects 'delay' elements the following way: if the
clock signal is true, the delay works as usual, otherwise it remembers
its current output and throws away its current input.  If we consider
signals to be functions of time (natural numbers), the behaviour of
delay can be described by the following function:

> delay x0 s (t_start,clk) t_sample
>   | t_start == t_sample = x0
>   | t_start < t_sample  = if clk t_sample
>                             then s (t_sample-1)
>                             else delay x0 s t_start s_clock (t_sample-1)
>   | otherwise           = error "stream doesn't exist yet"

A simple example to create counters operating at different rates using
the same generator:

> divisibleBy n x = x `mod` n == 0
>
> counter = stateful 0 (+1)
>
> drift = do
>   time <- counter
>   c1 <- withClock (divisibleBy 2 <$> time) counter
>   c2 <- withClock (divisibleBy 3 <$> time) counter
>   return ((,) <$> c1 <*> c2)

Note that if you want to slow down the drift system defined above, the
naive approach might lead to surprising results:

> slowDrift = do
>   time <- counter
>   withClock (divisibleBy 2 <$> time) drift

The problem is that the clocks are also slowed down, and their spikes
double in length.  This may or may not be what you want.  To overcome
this problem, we can define a clock oblivious edge detector to be used
within the definition of @drift@:

> edge = withClock (pure True) . transfer False (\b b' -> b && not b')
>
> drift = do
>   time <- counter
>   t2 <- edge (divisibleBy 2 <$> time)
>   t3 <- edge (divisibleBy 3 <$> time)
>   c1 <- withClock t2 counter
>   c2 <- withClock t3 counter
>   return ((,) <$> c1 <*> c2)

This works because the 'withClock' function overrides any clock
imposed on the generator from outside.

-}

module FRP.Elerea.Clocked
    (
    -- * The signal abstraction
      Signal
    , SignalGen
    -- * Embedding into I/O
    , start
    , external
    , externalMulti
    -- * Basic building blocks
    , delay
    , snapshot
    , generator
    , memo
    , until
    , withClock
    , global
    -- * Derived combinators
    , stateful
    , transfer
    , transfer2
    , transfer3
    , transfer4
    -- * Signals with side effects
    -- $effectful
    , execute
    , effectful
    , effectful1
    , effectful2
    , effectful3
    , effectful4
    ) where

import Control.Applicative
import Control.Concurrent.MVar
import Control.Monad
import Control.Monad.Fix
import Data.IORef
import Data.Maybe
import Prelude hiding (until)
import System.Mem.Weak

-- | A signal represents a value changing over time.  It can be
-- thought of as a function of type @Nat -> a@, where the argument is
-- the sampling time, and the 'Monad' instance agrees with the
-- intuition (bind corresponds to extracting the current sample).
-- Signals and the values they carry are denoted the following way in
-- the documentation:
--
-- > s = <<s0 s1 s2 ...>>
--
-- This says that @s@ is a signal that reads @s0@ during the first
-- sampling, @s1@ during the second and so on.  You can also think of
-- @s@ as the following function:
--
-- > s t_sample = [s0,s1,s2,...] !! t_sample
--
-- Signals are constrained to be sampled sequentially, there is no
-- random access.  The only way to observe their output is through
-- 'start'.
newtype Signal a = S (IO a) deriving (Functor, Applicative, Monad)

-- | A pair of actions to update a signal in two phases: internal
-- update without changing the output, finalisation (throwing away
-- previous state).
type UpdateAction = (IO (), IO ())

-- | A pointer to an update pair.
data Update = USig (Weak UpdateAction)  -- ^ ordinary signal
            | UClk UpdateAction         -- ^ clocked subnetwork superstep

-- | A dynamic set of actions to update a network without breaking
-- consistency.
type UpdatePool = [Update]

-- | A signal generator is the only source of stateful signals.  It
-- can be thought of as a function of type @Nat -> a@, where the
-- result is an arbitrary data structure that can potentially contain
-- new signals, and the argument is the creation time of these new
-- signals.  It exposes the 'MonadFix' interface, which makes it
-- possible to define signals in terms of each other.  Unlike the
-- simple variant, the denotation of signal generators differs from
-- that of signals.  We will use the following notation for
-- generators:
--
-- > g = <|g0 g1 g2 ...|>
--
-- Just like signals, generators behave as functions of time, but they
-- can also refer to the clock signal:
--
-- > g t_start s_clock = [g0,g1,g2,...] !! t_start
--
-- The conceptual difference between the two notions is that signals
-- are passed a sampling time, while generators expect a start time
-- that will be the creation time of all the freshly generated
-- signals in the resulting structure.
newtype SignalGen a = SG { unSG :: IORef UpdatePool -> IORef UpdatePool -> IO a }

-- | The phases every signal goes through during a superstep.
data Phase a = Ready a | Updated a a

instance Functor SignalGen where
    fmap = liftM

instance Applicative SignalGen where
    pure = return
    (<*>) = ap

instance Monad SignalGen where
    return x = SG $ \_ _ -> return x
    SG g >>= f = SG $ \p1 p2 -> g p1 p2 >>= \x -> unSG (f x) p1 p2

instance MonadFix SignalGen where
    mfix f = SG $ \p1 p2 -> mfix $ \x -> unSG (f x) p1 p2

getUpdate :: Update -> IO (Maybe (Update, UpdateAction))
getUpdate upd@(USig ptr) = (fmap.fmap) ((,) upd) (deRefWeak ptr)
getUpdate upd@(UClk ua) = return (Just (upd,ua))

-- | Embedding a signal into an 'IO' environment.  Repeated calls to
-- the computation returned cause the whole network to be updated, and
-- the current sample of the top-level signal is produced as a
-- result. This is the only way to extract a signal generator outside
-- the network, and it is equivalent to passing zero to the function
-- representing the generator.  The clock associated with the
-- top-level signal ticks at every sampling point.  In general:
--
-- > replicateM n =<< start <|<<x0 x1 x2 x3 ...>> ...|> == take n [x0,x1,x2,x3,...]
--
-- Example:
--
-- > do
-- >     smp <- start (stateful 3 (+2))
-- >     res <- replicateM 5 smp
-- >     print res
--
-- Output:
--
-- > [3,5,7,9,11]
start :: SignalGen (Signal a) -- ^ the generator of the top-level signal
      -> IO (IO a)            -- ^ the computation to sample the signal
start (SG gen) = do
    pool <- newIORef []
    S sample <- gen pool pool
    return $ do
        res <- sample
        superstep pool
        return res

-- | Performing the two-phase superstep.
superstep :: IORef UpdatePool -> IO ()
superstep pool = loop id []
  where
    loop getPtrs final = do
      (ptrs,acts) <- unzip.catMaybes <$> (mapM getUpdate =<< readIORef pool)
      case acts of
          [] -> do
              sequence_ final
              writeIORef pool (getPtrs [])
          _  -> do
              writeIORef pool []
              mapM_ fst acts
              loop ((ptrs++) . getPtrs) (mapM_ snd acts : final)

-- | Auxiliary function used by all the primitives that create a
-- mutable variable.
addSignal :: (a -> IO a)      -- ^ sampling function
          -> (a -> IO ())     -- ^ aging function
          -> IORef (Phase a)  -- ^ the mutable variable behind the signal
          -> IORef UpdatePool -- ^ the pool of update actions
          -> IO (Signal a)    -- ^ the signal created
addSignal sample update ref pool = do
    let upd = readIORef ref >>= \v -> case v of
            Ready x -> update x
            _       -> return ()

        fin = readIORef ref >>= \v -> case v of
            Updated x _ -> writeIORef ref $! Ready x
            _           -> error "Signal not updated!"

        sig = S $ readIORef ref >>= \v -> case v of
            Ready x     -> sample x
            Updated _ x -> return x
        {-# NOINLINE sig #-}
        -- NOINLINE to prevent sig from getting inlined into the
        -- argument position of mkWeak.

    updateActions <- mkWeak sig (upd,fin) Nothing
    modifyIORef pool (USig updateActions:)
    return sig

-- | The 'delay' combinator is the elementary building block for
-- adding state to the signal network by constructing delayed versions
-- of a signal that emit a given value at creation time and the
-- previous output of the signal afterwards.
--
-- The clock signal associated to the generator affects 'delay'
-- elements the following way: if the clock signal is true, the delay
-- works as usual, otherwise it remembers its current output and
-- throws away its current input.  If we consider signals to be
-- functions of time (natural numbers), the behaviour of delay can be
-- described by the following function:
--
-- > delay x0 s t_start s_clock t_sample
-- >   | t_start == t_sample = x0
-- >   | t_start < t_sample  = if s_clock t_sample
-- >                             then s (t_sample-1)
-- >                             else delay x0 s t_start s_clock (t_sample-1)
-- >   | otherwise           = error "stream doesn't exist yet"
--
-- The way signal generators are extracted by 'generator' ensures that
-- the error can never happen.
--
-- Example (requires the @DoRec@ extension):
--
-- > do
-- >     smp <- start $ do
-- >         rec let fib'' = liftA2 (+) fib' fib
-- >             fib' <- delay 1 fib''
-- >             fib <- delay 1 fib'
-- >         return fib
-- >     res <- replicateM 7 smp
-- >     print res
--
-- Output:
--
-- > [1,1,2,3,5,8,13]
delay :: a                    -- ^ initial output at creation time
      -> Signal a             -- ^ the signal to delay
      -> SignalGen (Signal a) -- ^ the delayed signal
delay x0 (S s) = SG $ \_gpool pool -> do
    ref <- newIORef (Ready x0)

    let update x = s >>= \x' -> x' `seq` writeIORef ref (Updated x' x)

    addSignal return update ref pool

-- | A formal conversion from signals to signal generators, which
-- effectively allows for retrieving the current value of a previously
-- created signal within a generator.  This includes both signals
-- defined in an external scope as well as those created earlier in
-- the same generator.  It can be modelled by the following function:
--
-- > snapshot s t_start s_clock = s t_start
snapshot :: Signal a -> SignalGen a
snapshot (S s) = SG $ \_ _ -> s

-- | Auxiliary function.
memoise :: IORef (Phase a) -> a -> IO a
memoise ref x = writeIORef ref (Updated undefined x) >> return x

-- | A reactive signal that takes the value to output from a signal
-- generator carried by its input with the sampling time provided as
-- the start time for the generated structure.  It is possible to
-- create new signals in the monad, which is the key to defining
-- dynamic data-flow networks.
--
-- > generator << <|x00 x01 x02 ...|>
-- >              <|x10 x11 x12 ...|>
-- >              <|x20 x21 x22 ...|>
-- >              ...
-- >           >> = <| <<x00 x11 x22 ...>>
-- >                   <<x00 x11 x22 ...>>
-- >                   <<x00 x11 x22 ...>>
-- >                   ...
-- >                |>
--
-- It can be thought of as the following function:
--
-- > generator g t_start s_clock t_sample = g t_sample s_clock t_sample
--
-- It has to live in the 'SignalGen' monad, because it needs to
-- maintain an internal state to be able to cache the current sample
-- for efficiency reasons. However, this state is not carried between
-- samples, therefore start time doesn't matter and can be ignored.
-- Also, even though it does not make use of the clock itself, part of
-- its job is to distribute it among the newly generated signals.
--
-- Refer to the longer example at the bottom of "FRP.Elerea.Simple" to
-- see how it can be used.
generator :: Signal (SignalGen a) -- ^ the signal of generators to run
          -> SignalGen (Signal a) -- ^ the signal of generated structures
generator (S s) = SG $ \gpool pool -> do
    ref <- newIORef (Ready undefined)

    let sample = (s >>= \(SG g) -> g gpool pool) >>= memoise ref

    addSignal (const sample) (const (() <$ sample)) ref gpool

-- | Memoising combinator.  It can be used to cache results of
-- applicative combinators in case they are used in several places.
-- Unlike in the simple variant, it is not observationally equivalent
-- to 'return' in the 'SignalGen' monad, because it only samples its
-- input signal when the associated clock ticks.  The @memo@
-- combinator can be modelled by the following function:
--
-- > memo s t_start s_clock t_sample
-- >   | s_clock t_sample = s t_sample
-- >   | otherwise        = memo s t_start s_clock (t_sample-1)
--
-- For instance, if @s = f \<$\> s'@, then @f@ will be recalculated
-- once for each sampling of @s@.  This can be avoided by writing @s
-- \<- memo (f \<$\> s')@ instead.  However, 'memo' incurs a small
-- overhead, therefore it should not be used blindly.
--
-- All the functions defined in this module return memoised signals.
memo :: Signal a             -- ^ the signal to cache
     -> SignalGen (Signal a) -- ^ a signal observationally equivalent to the argument
memo (S s) = SG $ \_gpool pool -> do
    ref <- newIORef (Ready undefined)

    let sample = s >>= memoise ref

    addSignal (const sample) (const (() <$ sample)) ref pool

-- | A signal that is true exactly once: the first time the input
-- signal is true.  Afterwards, it is constantly false, and it holds
-- no reference to the input signal.  Note that 'until' always follows
-- the master clock, i.e. the fastest one, therefore it never creates
-- a long spike of @True@.  For instance (assuming the rest of the
-- input is constantly @False@):
--
-- > until <<False False True True False True ...>> =
-- >     <| <<False False True  False False False False False False False ...>>
-- >        << ---  False True  False False False False False False False ...>>
-- >        << ---   ---  True  False False False False False False False ...>>
-- >        << ---   ---   ---  True  False False False False False False ...>>
-- >        << ---   ---   ---   ---  False True  False False False False ...>>
-- >        << ---   ---   ---   ---   ---  True  False False False False ...>>
-- >        << ---   ---   ---   ---   ---   ---  False False False False ...>>
-- >        ...
-- >     |>
--
-- It is observationally equivalent to the following expression (which
-- would hold onto @s@ forever):
--
-- > until s = global $ do
-- >     step <- transfer False (||) s
-- >     dstep <- delay False step
-- >     memo (liftA2 (/=) step dstep)
--
-- Example:
--
-- > do
-- >     smp <- start $ do
-- >         cnt <- stateful 0 (+1)
-- >         tick <- until ((>=3) <$> cnt)
-- >         return $ liftA2 (,) cnt tick
-- >     res <- replicateM 6 smp
-- >     print res
--
-- Output:
--
-- > [(0,False),(1,False),(2,False),(3,True),(4,False),(5,False)]
until :: Signal Bool             -- ^ the boolean input signal
      -> SignalGen (Signal Bool) -- ^ a one-shot signal true only the first time the input is true
until (S s) = SG $ \gpool _pool -> do
    ref <- newIORef (Ready undefined)

    rsmp <- mfix $ \rs -> newIORef $ do
        x <- s
        writeIORef ref (Updated undefined x)
        when x $ writeIORef rs $ do
            writeIORef ref (Updated undefined False)
            return False
        return x

    let sample = join (readIORef rsmp)

    addSignal (const sample) (const (() <$ sample)) ref gpool

-- | Override the clock used in a generator.  Note that clocks don't
-- interact unless one is used in the definition of the other, i.e. it
-- is possible to provide a fast clock within a generator with a slow
-- associated clock.  It is equivalent to the following function:
--
-- > withClock s g t_start s_clock = g t_start s
--
-- For instance, the following equivalence holds:
--
-- > withClock (pure False) (stateful x f) == pure x
withClock :: Signal Bool -> SignalGen a -> SignalGen a
withClock (S cs) (SG g) = SG $ \gpool _pool -> do
    pool' <- newIORef []
    pref <- newIORef Nothing

    let whenc act = cs >>= flip when act

        upd = readIORef pref >>= \mp -> case mp of
            Nothing -> do
                (ptrs,acts) <- unzip.catMaybes <$> (mapM getUpdate =<< readIORef pool')
                writeIORef pool' ptrs
                writeIORef pref (Just acts)
                mapM_ fst acts
            Just _  -> return ()

        fin = readIORef pref >>= \mp -> case mp of
            Nothing   -> return ()
            Just acts -> do
                writeIORef pref Nothing
                mapM_ snd acts

    modifyIORef gpool (UClk (whenc upd, whenc fin):)
    g gpool pool'

-- | Equivalent to @withClock (pure True)@, but more efficient.
global :: SignalGen a -> SignalGen a
global (SG g) = SG $ \gpool _ -> g gpool gpool

-- | A signal that can be directly fed through the sink function
-- returned.  This can be used to attach the network to the outer
-- world.  The signal always yields the value last written to the
-- sink.  In other words, if the sink is written less frequently than
-- the network sampled, the output remains the same during several
-- samples.  If values are pushed in the sink more frequently, only
-- the last one before sampling is visible on the output.
--
-- Example:
--
-- > do
-- >     (sig,snk) <- external 4
-- >     smp <- start (return sig)
-- >     r1 <- smp
-- >     r2 <- smp
-- >     snk 7
-- >     r3 <- smp
-- >     snk 9
-- >     snk 2
-- >     r4 <- smp
-- >     print [r1,r2,r3,r4]
--
-- Output:
--
-- > [4,4,7,2]
external :: a                         -- ^ initial value
         -> IO (Signal a, a -> IO ()) -- ^ the signal and an IO function to feed it
external x = do
    ref <- newIORef x
    return (S (readIORef ref), writeIORef ref)

-- | An event-like signal that can be fed through the sink function
-- returned.  The signal carries a list of values fed in since the
-- last sampling (always synchronised to the top-level samplings
-- regardless of any associated clock), i.e. it is constantly @[]@ if
-- the sink is never invoked.  The order of elements is reversed, so
-- the last value passed to the sink is the head of the list.  Note
-- that unlike 'external' this function only returns a generator to be
-- used within the expression constructing the top-level stream, and
-- this generator can only be used once.
--
-- Example:
--
-- > do
-- >     (gen,snk) <- externalMulti
-- >     smp <- start gen
-- >     r1 <- smp
-- >     snk 7
-- >     r2 <- smp
-- >     r3 <- smp
-- >     snk 9
-- >     snk 2
-- >     r4 <- smp
-- >     print [r1,r2,r3,r4]
--
-- Output:
--
-- > [[],[7],[],[2,9]]
externalMulti :: IO (SignalGen (Signal [a]), a -> IO ()) -- ^ a generator for the event signal and the associated sink
externalMulti = do
    var <- newMVar []
    return (SG $ \gpool _pool -> do
                 ref <- newIORef (Ready undefined)
                 let sample = modifyMVar var $ \list -> memoise ref list >> return ([], list)
                 addSignal (const sample) (const (() <$ sample)) ref gpool
           ,\val -> do
                 vals <- takeMVar var
                 putMVar var (val:vals)
           )

-- | A pure stateful signal.  The initial state is the first output,
-- and every subsequent state is derived from the preceding one by
-- applying a pure transformation.  It is affected by the associated
-- clock like 'delay': no transformation is performed in the absence
-- of a tick; see the example at the top.
--
-- Example:
--
-- > do
-- >     smp <- start (stateful "x" ('x':))
-- >     res <- replicateM 5 smp
-- >     print res
--
-- Output:
--
-- > ["x","xx","xxx","xxxx","xxxxx"]
stateful :: a                    -- ^ initial state
         -> (a -> a)             -- ^ state transformation
         -> SignalGen (Signal a)
stateful x0 f = mfix $ \sig -> delay x0 (f <$> sig)

-- | A stateful transfer function.  The current input affects the
-- current output, i.e. the initial state given in the first argument
-- is considered to appear before the first output, and can never be
-- observed, and subsequent states are determined by combining the
-- preceding state with the current output of the input signal using
-- the function supplied.  It is affected by the associated clock like
-- 'delay': no transformation is performed in the absence of a tick;
-- see the example at the top.
--
-- Example:
--
-- > do
-- >     smp <- start $ do
-- >         cnt <- stateful 1 (+1)
-- >         transfer 10 (+) cnt
-- >     res <- replicateM 5 smp
-- >     print res
--
-- Output:
--
-- > [11,13,16,20,25]
transfer :: a                    -- ^ initial internal state
         -> (t -> a -> a)        -- ^ state updater function
         -> Signal t             -- ^ input signal
         -> SignalGen (Signal a)
transfer x0 f s = mfix $ \sig -> do
    sig' <- delay x0 sig
    memo (liftA2 f s sig')

-- | A variation of 'transfer' with two input signals.
transfer2 :: a                     -- ^ initial internal state
          -> (t1 -> t2 -> a -> a)  -- ^ state updater function
          -> Signal t1             -- ^ input signal 1
          -> Signal t2             -- ^ input signal 2
          -> SignalGen (Signal a)
transfer2 x0 f s1 s2 = mfix $ \sig -> do
    sig' <- delay x0 sig
    memo (liftA3 f s1 s2 sig')

-- | A variation of 'transfer' with three input signals.
transfer3 :: a                           -- ^ initial internal state
          -> (t1 -> t2 -> t3 -> a -> a)  -- ^ state updater function
          -> Signal t1                   -- ^ input signal 1
          -> Signal t2                   -- ^ input signal 2
          -> Signal t3                   -- ^ input signal 3
          -> SignalGen (Signal a)
transfer3 x0 f s1 s2 s3 = mfix $ \sig -> do
    sig' <- delay x0 sig
    memo (liftM4 f s1 s2 s3 sig')

-- | A variation of 'transfer' with four input signals.
transfer4 :: a                                 -- ^ initial internal state
          -> (t1 -> t2 -> t3 -> t4 -> a -> a)  -- ^ state updater function
          -> Signal t1                         -- ^ input signal 1
          -> Signal t2                         -- ^ input signal 2
          -> Signal t3                         -- ^ input signal 3
          -> Signal t4                         -- ^ input signal 4
          -> SignalGen (Signal a)
transfer4 x0 f s1 s2 s3 s4 = mfix $ \sig -> do
    sig' <- delay x0 sig
    memo (liftM5 f s1 s2 s3 s4 sig')

{- $effectful

The following combinators are primarily aimed at library implementors
who wish build abstractions to effectful libraries on top of Elerea.

-}

-- | An IO action executed in the 'SignalGen' monad. Can be used as
-- `liftIO`.
execute :: IO a -> SignalGen a
execute act = SG $ \_ _ -> act

-- | A signal that executes a given IO action once at every sampling.
--
-- In essence, this combinator provides cooperative multitasking
-- capabilities, and its primary purpose is to assist library writers
-- in wrapping effectful APIs as conceptually pure signals.  If there
-- are several effectful signals in the system, their order of
-- execution is undefined and should not be relied on.
--
-- Example:
--
-- > do
-- >     smp <- start $ do
-- >         ref <- execute $ newIORef 0
-- >         effectful $ do
-- >             x <- readIORef ref
-- >             putStrLn $ "Count: " ++ show x
-- >             writeIORef ref $! x+1
-- >             return ()
-- >     replicateM_ 5 smp
--
-- Output:
--
-- > Count: 0
-- > Count: 1
-- > Count: 2
-- > Count: 3
-- > Count: 4
--
-- Another example (requires mersenne-random):
--
-- > do
-- >     smp <- start $ effectful $ return randomIO :: IO (IO Double)
-- >     res <- replicateM 5 smp
-- >     print res
--
-- Output:
--
-- > [0.12067753390401374,0.8658877349182655,0.7159264443196786,0.1756941896012891,0.9513646060896676]
effectful :: IO a                 -- ^ the action to be executed repeatedly
          -> SignalGen (Signal a)
effectful act = SG $ \_gpool pool -> do
  ref <- newIORef (Ready undefined)

  let sample = act >>= memoise ref

  addSignal (const sample) (const (() <$ sample)) ref pool

-- | A signal that executes a parametric IO action once at every
-- sampling.  The parameter is supplied by another signal at every
-- sampling step.
effectful1 :: (t -> IO a)          -- ^ the action to be executed repeatedly
           -> Signal t             -- ^ parameter signal
           -> SignalGen (Signal a)
effectful1 act (S s) = SG $ \_gpool pool -> do
  ref <- newIORef (Ready undefined)

  let sample = s >>= act >>= memoise ref

  addSignal (const sample) (const (() <$ sample)) ref pool

-- | Like 'effectful1', but with two parameter signals.
effectful2 :: (t1 -> t2 -> IO a)   -- ^ the action to be executed repeatedly
           -> Signal t1            -- ^ parameter signal 1
           -> Signal t2            -- ^ parameter signal 2
           -> SignalGen (Signal a)
effectful2 act (S s1) (S s2) = SG $ \_gpool pool -> do
  ref <- newIORef (Ready undefined)

  let sample = join (liftM2 act s1 s2) >>= memoise ref

  addSignal (const sample) (const (() <$ sample)) ref pool

-- | Like 'effectful1', but with three parameter signals.
effectful3 :: (t1 -> t2 -> t3 -> IO a) -- ^ the action to be executed repeatedly
           -> Signal t1                -- ^ parameter signal 1
           -> Signal t2                -- ^ parameter signal 2
           -> Signal t3                -- ^ parameter signal 3
           -> SignalGen (Signal a)
effectful3 act (S s1) (S s2) (S s3) = SG $ \_gpool pool -> do
  ref <- newIORef (Ready undefined)

  let sample = join (liftM3 act s1 s2 s3) >>= memoise ref

  addSignal (const sample) (const (() <$ sample)) ref pool

-- | Like 'effectful1', but with four parameter signals.
effectful4 :: (t1 -> t2 -> t3 -> t4 -> IO a) -- ^ the action to be executed repeatedly
           -> Signal t1                      -- ^ parameter signal 1
           -> Signal t2                      -- ^ parameter signal 2
           -> Signal t3                      -- ^ parameter signal 3
           -> Signal t4                      -- ^ parameter signal 4
           -> SignalGen (Signal a)
effectful4 act (S s1) (S s2) (S s3) (S s4) = SG $ \_gpool pool -> do
  ref <- newIORef (Ready undefined)

  let sample = join (liftM4 act s1 s2 s3 s4) >>= memoise ref

  addSignal (const sample) (const (() <$ sample)) ref pool

instance Show (Signal a) where
    showsPrec _ _ s = "<SIGNAL>" ++ s

instance Eq (Signal a) where
    _ == _ = False

-- | Error message for unimplemented instance functions.
unimp :: String -> a
unimp = error . ("Signal: "++)

instance Ord t => Ord (Signal t) where
    compare = unimp "compare"
    min = liftA2 min
    max = liftA2 max

instance Enum t => Enum (Signal t) where
    succ = fmap succ
    pred = fmap pred
    toEnum = pure . toEnum
    fromEnum = unimp "fromEnum"
    enumFrom = unimp "enumFrom"
    enumFromThen = unimp "enumFromThen"
    enumFromTo = unimp "enumFromTo"
    enumFromThenTo = unimp "enumFromThenTo"

instance Bounded t => Bounded (Signal t) where
    minBound = pure minBound
    maxBound = pure maxBound

instance Num t => Num (Signal t) where
    (+) = liftA2 (+)
    (-) = liftA2 (-)
    (*) = liftA2 (*)
    signum = fmap signum
    abs = fmap abs
    negate = fmap negate
    fromInteger = pure . fromInteger

instance Real t => Real (Signal t) where
    toRational = unimp "toRational"

instance Integral t => Integral (Signal t) where
    quot = liftA2 quot
    rem = liftA2 rem
    div = liftA2 div
    mod = liftA2 mod
    quotRem a b = (fst <$> qrab,snd <$> qrab)
      where qrab = quotRem <$> a <*> b
    divMod a b = (fst <$> dmab,snd <$> dmab)
      where dmab = divMod <$> a <*> b
    toInteger = unimp "toInteger"

instance Fractional t => Fractional (Signal t) where
    (/) = liftA2 (/)
    recip = fmap recip
    fromRational = pure . fromRational

instance Floating t => Floating (Signal t) where
    pi = pure pi
    exp = fmap exp
    sqrt = fmap sqrt
    log = fmap log
    (**) = liftA2 (**)
    logBase = liftA2 logBase
    sin = fmap sin
    tan = fmap tan
    cos = fmap cos
    asin = fmap asin
    atan = fmap atan
    acos = fmap acos
    sinh = fmap sinh
    tanh = fmap tanh
    cosh = fmap cosh
    asinh = fmap asinh
    atanh = fmap atanh
    acosh = fmap acosh