This is hledger-lib/doc/hledger_journal.5.info, produced by makeinfo version 4.8 from stdin.  File: hledger_journal.5.info, Node: Top, Up: (dir) hledger_journal(5) hledger 1.1 ****************************** hledger's usual data source is a plain text file containing journal entries in hledger journal format. This file represents a standard accounting general journal. I use file names ending in `.journal', but that's not required. The journal file contains a number of transaction entries, each describing a transfer of money (or any commodity) between two or more named accounts, in a simple format readable by both hledger and humans. hledger's journal format is a compatible subset, mostly, of ledger's journal format, so hledger can work with compatible ledger journal files as well. It's safe, and encouraged, to run both hledger and ledger on the same journal file, eg to validate the results you're getting. You can use hledger without learning any more about this file; just use the add or web commands to create and update it. Many users, though, also edit the journal file directly with a text editor, perhaps assisted by the helper modes for emacs or vim. Here's an example: ; A sample journal file. This is a comment. 2008/01/01 income ; <- transaction's first line starts in column 0, contains date and description assets:bank:checking $1 ; <- posting lines start with whitespace, each contains an account name income:salary $-1 ; followed by at least two spaces and an amount 2008/06/01 gift assets:bank:checking $1 ; <- at least two postings in a transaction income:gifts $-1 ; <- their amounts must balance to 0 2008/06/02 save assets:bank:saving $1 assets:bank:checking ; <- one amount may be omitted; here $-1 is inferred 2008/06/03 eat & shop ; <- description can be anything expenses:food $1 expenses:supplies $1 ; <- this transaction debits two expense accounts assets:cash ; <- $-2 inferred 2008/12/31 * pay off ; <- an optional * or ! after the date means "cleared" (or anything you want) liabilities:debts $1 assets:bank:checking * Menu: * FILE FORMAT:: * EDITOR SUPPORT::  File: hledger_journal.5.info, Node: FILE FORMAT, Next: EDITOR SUPPORT, Prev: Top, Up: Top 1 FILE FORMAT ************* * Menu: * Transactions:: * Dates:: * Account names:: * Amounts:: * Virtual Postings:: * Balance Assertions:: * Balance Assignments:: * Prices:: * Comments:: * Tags:: * Directives::  File: hledger_journal.5.info, Node: Transactions, Next: Dates, Up: FILE FORMAT 1.1 Transactions ================ Transactions are represented by journal entries. Each begins with a simple date in column 0, followed by three optional fields with spaces between them: * a status flag, which can be empty or `!' or `*' (meaning "uncleared", "pending" and "cleared", or whatever you want) * a transaction code (eg a check number), * and/or a description then some number of postings, of some amount to some account. Each posting is on its own line, consisting of: * indentation of one or more spaces (or tabs) * optionally, a `!' or `*' status flag followed by a space * an account name, optionally containing single spaces * optionally, two or more spaces or tabs followed by an amount Usually there are two or more postings, though one or none is also possible. The posting amounts within a transaction must always balance, ie add up to 0. Optionally one amount can be left blank, in which case it will be inferred.  File: hledger_journal.5.info, Node: Dates, Next: Account names, Prev: Transactions, Up: FILE FORMAT 1.2 Dates ========= * Menu: * Simple dates:: * Secondary dates:: * Posting dates::  File: hledger_journal.5.info, Node: Simple dates, Next: Secondary dates, Up: Dates 1.2.1 Simple dates ------------------ Within a journal file, transaction dates use Y/M/D (or Y-M-D or Y.M.D) Leading zeros are optional. The year may be omitted, in which case it will be inferred from the context - the current transaction, the default year set with a default year directive, or the current date when the command is run. Some examples: `2010/01/31', `1/31', `2010-01-31', `2010.1.31'.  File: hledger_journal.5.info, Node: Secondary dates, Next: Posting dates, Prev: Simple dates, Up: Dates 1.2.2 Secondary dates --------------------- Real-life transactions sometimes involve more than one date - eg the date you write a cheque, and the date it clears in your bank. When you want to model this, eg for more accurate balances, you can specify individual posting dates, which I recommend. Or, you can use the secondary dates (aka auxiliary/effective dates) feature, supported for compatibility with Ledger. A secondary date can be written after the primary date, separated by an equals sign. The primary date, on the left, is used by default; the secondary date, on the right, is used when the `--date2' flag is specified (`--aux-date' or `--effective' also work). The meaning of secondary dates is up to you, but it's best to follow a consistent rule. Eg write the bank's clearing date as primary, and when needed, the date the transaction was initiated as secondary. Here's an example. Note that a secondary date will use the year of the primary date if unspecified. 2010/2/23=2/19 movie ticket expenses:cinema $10 assets:checking $ hledger register checking 2010/02/23 movie ticket assets:checking $-10 $-10 $ hledger register checking --date2 2010/02/19 movie ticket assets:checking $-10 $-10 Secondary dates require some effort; you must use them consistently in your journal entries and remember whether to use or not use the `--date2' flag for your reports. They are included in hledger for Ledger compatibility, but posting dates are a more powerful and less confusing alternative.  File: hledger_journal.5.info, Node: Posting dates, Prev: Secondary dates, Up: Dates 1.2.3 Posting dates ------------------- You can give individual postings a different date from their parent transaction, by adding a posting comment containing a tag (see below) like `date:DATE'. This is probably the best way to control posting dates precisely. Eg in this example the expense should appear in May reports, and the deduction from checking should be reported on 6/1 for easy bank reconciliation: 2015/5/30 expenses:food $10 ; food purchased on saturday 5/30 assets:checking ; bank cleared it on monday, date:6/1 $ hledger -f t.j register food 2015/05/30 expenses:food $10 $10 $ hledger -f t.j register checking 2015/06/01 assets:checking $-10 $-10 DATE should be a simple date; if the year is not specified it will use the year of the transaction's date. You can set the secondary date similarly, with `date2:DATE2'. The `date:' or `date2:' tags must have a valid simple date value if they are present, eg a `date:' tag with no value is not allowed. Ledger's earlier, more compact bracketed date syntax is also supported: `[DATE]', `[DATE=DATE2]' or `[=DATE2]'. hledger will attempt to parse any square-bracketed sequence of the `0123456789/-.=' characters in this way. With this syntax, DATE infers its year from the transaction and DATE2 infers its year from DATE.  File: hledger_journal.5.info, Node: Account names, Next: Amounts, Prev: Dates, Up: FILE FORMAT 1.3 Account names ================= Account names typically have several parts separated by a full colon, from which hledger derives a hierarchical chart of accounts. They can be anything you like, but in finance there are traditionally five top-level accounts: `assets', `liabilities', `income', `expenses', and `equity'. Account names may contain single spaces, eg: `assets:accounts receivable'. Because of this, they must always be followed by *two or more spaces* (or newline). Account names can be aliased.  File: hledger_journal.5.info, Node: Amounts, Next: Virtual Postings, Prev: Account names, Up: FILE FORMAT 1.4 Amounts =========== After the account name, there is usually an amount. Important: between account name and amount, there must be *two or more spaces*. Amounts consist of a number and (usually) a currency symbol or commodity name. Some examples: `2.00001' `$1' `4000 AAPL' `3 "green apples"' `-$1,000,000.00' `INR 9,99,99,999.00' `EUR -2.000.000,00' As you can see, the amount format is somewhat flexible: * amounts are a number (the "quantity") and optionally a currency symbol/commodity name (the "commodity"). * the commodity is a symbol, word, or phrase, on the left or right, with or without a separating space. If the commodity contains numbers, spaces or non-word punctuation it must be enclosed in double quotes. * negative amounts with a commodity on the left can have the minus sign before or after it * digit groups (thousands, or any other grouping) can be separated by commas (in which case period is used for decimal point) or periods (in which case comma is used for decimal point) You can use any of these variations when recording data, but when hledger displays amounts, it will choose a consistent format for each commodity. (Except for price amounts, which are always formatted as written). The display format is chosen as follows: * if there is a commodity directive specifying the format, that is used * otherwise the format is inferred from the first posting amount in that commodity in the journal, and the precision (number of decimal places) will be the maximum from all posting amounts in that commmodity * or if there are no such amounts in the journal, a default format is used (like `$1000.00'). Price amounts and amounts in D directives usually don't affect amount format inference, but in some situations they can do so indirectly. (Eg when D's default commodity is applied to a commodity-less amount, or when an amountless posting is balanced using a price's commodity, or when -V is used.) If you find this causing problems, set the desired format with a commodity directive.  File: hledger_journal.5.info, Node: Virtual Postings, Next: Balance Assertions, Prev: Amounts, Up: FILE FORMAT 1.5 Virtual Postings ==================== When you parenthesise the account name in a posting, we call that a _virtual posting_, which means: * it is ignored when checking that the transaction is balanced * it is excluded from reports when the `--real/-R' flag is used, or the `real:1' query. You could use this, eg, to set an account's opening balance without needing to use the `equity:opening balances' account: 1/1 special unbalanced posting to set initial balance (assets:checking) $1000 When the account name is bracketed, we call it a _balanced virtual posting_. This is like an ordinary virtual posting except the balanced virtual postings in a transaction must balance to 0, like the real postings (but separately from them). Balanced virtual postings are also excluded by `--real/-R' or `real:1'. 1/1 buy food with cash, and update some budget-tracking subaccounts elsewhere expenses:food $10 assets:cash $-10 [assets:checking:available] $10 [assets:checking:budget:food] $-10 Virtual postings have some legitimate uses, but those are few. You can usually find an equivalent journal entry using real postings, which is more correct and provides better error checking.  File: hledger_journal.5.info, Node: Balance Assertions, Next: Balance Assignments, Prev: Virtual Postings, Up: FILE FORMAT 1.6 Balance Assertions ====================== hledger supports Ledger-style balance assertions in journal files. These look like `=EXPECTEDBALANCE' following a posting's amount. Eg in this example we assert the expected dollar balance in accounts a and b after each posting: 2013/1/1 a $1 =$1 b =$-1 2013/1/2 a $1 =$2 b $-1 =$-2 After reading a journal file, hledger will check all balance assertions and report an error if any of them fail. Balance assertions can protect you from, eg, inadvertently disrupting reconciled balances while cleaning up old entries. You can disable them temporarily with the `--ignore-assertions' flag, which can be useful for troubleshooting or for reading Ledger files. * Menu: * Assertions and ordering:: * Assertions and commodities:: * Assertions and subaccounts:: * Assertions and virtual postings::  File: hledger_journal.5.info, Node: Assertions and ordering, Next: Assertions and commodities, Up: Balance Assertions 1.6.1 Assertions and ordering ----------------------------- hledger sorts an account's postings and assertions first by date and then (for postings on the same day) by parse order. Note this is different from Ledger, which sorts assertions only by parse order. (Also, Ledger assertions do not see the accumulated effect of repeated postings to the same account within a transaction.) So, hledger balance assertions keep working if you reorder differently-dated transactions within the journal. But if you reorder same-dated transactions or postings, assertions might break and require updating. This order dependence does bring an advantage: precise control over the order of postings and assertions within a day, so you can assert intra-day balances. With included files, things are a little more complicated. Including preserves the ordering of postings and assertions. If you have multiple postings to an account on the same day, split across different files, and you also want to assert the account's balance on the same day, you'll have to put the assertion in the right file.  File: hledger_journal.5.info, Node: Assertions and commodities, Next: Assertions and subaccounts, Prev: Assertions and ordering, Up: Balance Assertions 1.6.2 Assertions and commodities -------------------------------- The asserted balance must be a simple single-commodity amount, and in fact the assertion checks only this commodity's balance within the (possibly multi-commodity) account balance. We could call this a partial balance assertion. This is compatible with Ledger, and makes it possible to make assertions about accounts containing multiple commodities. To assert each commodity's balance in such a multi-commodity account, you can add multiple postings (with amount 0 if necessary). But note that no matter how many assertions you add, you can't be sure the account does not contain some unexpected commodity. (We'll add support for this kind of total balance assertion if there's demand.)  File: hledger_journal.5.info, Node: Assertions and subaccounts, Next: Assertions and virtual postings, Prev: Assertions and commodities, Up: Balance Assertions 1.6.3 Assertions and subaccounts -------------------------------- Balance assertions do not count the balance from subaccounts; they check the posted account's exclusive balance. For example: 1/1 checking:fund 1 = 1 ; post to this subaccount, its balance is now 1 checking 1 = 1 ; post to the parent account, its exclusive balance is now 1 equity The balance report's flat mode shows these exclusive balances more clearly: $ hledger bal checking --flat 1 checking 1 checking:fund -------------------- 2  File: hledger_journal.5.info, Node: Assertions and virtual postings, Prev: Assertions and subaccounts, Up: Balance Assertions 1.6.4 Assertions and virtual postings ------------------------------------- Balance assertions are checked against all postings, both real and virtual. They are not affected by the `--real/-R' flag or `real:' query.  File: hledger_journal.5.info, Node: Balance Assignments, Next: Prices, Prev: Balance Assertions, Up: FILE FORMAT 1.7 Balance Assignments ======================= Ledger-style balance assignments are also supported. These are like balance assertions, but with no posting amount on the left side of the equals sign; instead it is calculated automatically so as to satisfy the assertion. This can be a convenience during data entry, eg when setting opening balances: ; starting a new journal, set asset account balances 2016/1/1 opening balances assets:checking = $409.32 assets:savings = $735.24 assets:cash = $42 equity:opening balances or when adjusting a balance to reality: ; no cash left; update balance, record any untracked spending as a generic expense 2016/1/15 assets:cash = $0 expenses:misc The calculated amount depends on the account's balance in the commodity at that point (which depends on the previously-dated postings of the commodity to that account since the last balance assertion or assignment). Note that using balance assignments makes your journal a little less explicit; to know the exact amount posted, you have to run hledger or do the calculations yourself, instead of just reading it.  File: hledger_journal.5.info, Node: Prices, Next: Comments, Prev: Balance Assignments, Up: FILE FORMAT 1.8 Prices ========== * Menu: * Transaction prices:: * Market prices::  File: hledger_journal.5.info, Node: Transaction prices, Next: Market prices, Up: Prices 1.8.1 Transaction prices ------------------------ Within a transaction posting, you can record an amount's price in another commodity. This can be used to document the cost (for a purchase), or selling price (for a sale), or the exchange rate that was used, for this transaction. These transaction prices are fixed, and do not change over time. Amounts with transaction prices can be displayed in the transaction price's commodity, by using the `--cost/-B' flag supported by most hledger commands (mnemonic: "cost Basis"). There are several ways to record a transaction price: 1. Write the unit price (aka exchange rate), as `@ UNITPRICE' after the amount: 2009/1/1 assets:foreign currency €100 @ $1.35 ; one hundred euros at $1.35 each assets:cash 2. Or write the total price, as `@@ TOTALPRICE' after the amount: 2009/1/1 assets:foreign currency €100 @@ $135 ; one hundred euros at $135 for the lot assets:cash 3. Or let hledger infer the price so as to balance the transaction. To permit this, you must fully specify all posting amounts, and their sum must have a non-zero amount in exactly two commodities: 2009/1/1 assets:foreign currency €100 ; one hundred euros assets:cash $-135 ; exchanged for $135 With any of the above examples we get: $ hledger print -B 2009/01/01 assets:foreign currency $135.00 assets:cash $-135.00 Example use for transaction prices: recording the effective conversion rate of purchases made in a foreign currency.  File: hledger_journal.5.info, Node: Market prices, Prev: Transaction prices, Up: Prices 1.8.2 Market prices ------------------- Market prices are not tied to a particular transaction; they represent historical exchange rates between two commodities. (Ledger calls them historical prices.) For example, the prices published by a stock exchange or the foreign exchange market. Some commands (balance, currently) can use this information to show the market value of things at a given date. To record market prices, use P directives in the main journal or in an included file. Their format is: P DATE COMMODITYBEINGPRICED UNITPRICE DATE is a simple date as usual. COMMODITYBEINGPRICED is the symbol of the commodity being priced (just the symbol, no quantity). UNITPRICE is an ordinary amount (symbol and quantity) in a second commodity, specifying the unit price or conversion rate for the first commodity in terms of the second, on the given date. For example, the following directives say that one euro was worth 1.35 US dollars during 2009, and $1.40 from 2010 onward: P 2009/1/1 € $1.35 P 2010/1/1 € $1.40  File: hledger_journal.5.info, Node: Comments, Next: Tags, Prev: Prices, Up: FILE FORMAT 1.9 Comments ============ Lines in the journal beginning with a semicolon (`;') or hash (`#') or asterisk (`*') are comments, and will be ignored. (Asterisk comments make it easy to treat your journal like an org-mode outline in emacs.) Also, anything between `comment' and `end comment' directives is a (multi-line) comment. If there is no `end comment', the comment extends to the end of the file. You can attach comments to a transaction by writing them after the description and/or indented on the following lines (before the postings). Similarly, you can attach comments to an individual posting by writing them after the amount and/or indented on the following lines. Some examples: # a journal comment ; also a journal comment comment This is a multiline comment, which continues until a line where the "end comment" string appears on its own. end comment 2012/5/14 something ; a transaction comment ; the transaction comment, continued posting1 1 ; a comment for posting 1 posting2 ; a comment for posting 2 ; another comment line for posting 2 ; a journal comment (because not indented)  File: hledger_journal.5.info, Node: Tags, Next: Directives, Prev: Comments, Up: FILE FORMAT 1.10 Tags ========= A _tag_ is a word followed by a full colon inside a transaction or posting comment. You can write multiple tags, comma separated. Eg: `; a comment containing sometag:, anothertag:'. You can search for tags with the `tag:' query. A tag can also have a value, which is any text between the colon and the next comma or newline, excluding leading/trailing whitespace. (So hledger tag values can not contain commas or newlines). Tags in a transaction comment affect the transaction and all of its postings, while tags in a posting comment affect only that posting. For example, the following transaction has three tags (A, TAG2, third-tag) and the posting has four (A, TAG2, third-tag, posting-tag): 1/1 a transaction ; A:, TAG2: ; third-tag: a third transaction tag, this time with a value (a) $1 ; posting-tag: Tags are like Ledger's metadata feature, except hledger's tag values are simple strings.  File: hledger_journal.5.info, Node: Directives, Prev: Tags, Up: FILE FORMAT 1.11 Directives =============== * Menu: * Account aliases:: * account directive:: * apply account directive:: * Multi-line comments:: * commodity directive:: * Default commodity:: * Default year:: * Including other files::  File: hledger_journal.5.info, Node: Account aliases, Next: account directive, Up: Directives 1.11.1 Account aliases ---------------------- You can define aliases which rewrite your account names (after reading the journal, before generating reports). hledger's account aliases can be useful for: * expanding shorthand account names to their full form, allowing easier data entry and a less verbose journal * adapting old journals to your current chart of accounts * experimenting with new account organisations, like a new hierarchy or combining two accounts into one * customising reports See also How to use account aliases. * Menu: * Basic aliases:: * Regex aliases:: * Multiple aliases:: * end aliases::  File: hledger_journal.5.info, Node: Basic aliases, Next: Regex aliases, Up: Account aliases 1.11.1.1 Basic aliases ...................... To set an account alias, use the `alias' directive in your journal file. This affects all subsequent journal entries in the current file or its included files. The spaces around the = are optional: alias OLD = NEW Or, you can use the `--alias 'OLD=NEW'' option on the command line. This affects all entries. It's useful for trying out aliases interactively. OLD and NEW are full account names. hledger will replace any occurrence of the old account name with the new one. Subaccounts are also affected. Eg: alias checking = assets:bank:wells fargo:checking # rewrites "checking" to "assets:bank:wells fargo:checking", or "checking:a" to "assets:bank:wells fargo:checking:a"  File: hledger_journal.5.info, Node: Regex aliases, Next: Multiple aliases, Prev: Basic aliases, Up: Account aliases 1.11.1.2 Regex aliases ...................... There is also a more powerful variant that uses a regular expression, indicated by the forward slashes. (This was the default behaviour in hledger 0.24-0.25): alias /REGEX/ = REPLACEMENT or `--alias '/REGEX/=REPLACEMENT''. REGEX is a case-insensitive regular expression. Anywhere it matches inside an account name, the matched part will be replaced by REPLACEMENT. If REGEX contains parenthesised match groups, these can be referenced by the usual numeric backreferences in REPLACEMENT. Note, currently regular expression aliases may cause noticeable slow-downs. (And if you use Ledger on your hledger file, they will be ignored.) Eg: alias /^(.+):bank:([^:]+)(.*)/ = \1:\2 \3 # rewrites "assets:bank:wells fargo:checking" to "assets:wells fargo checking"  File: hledger_journal.5.info, Node: Multiple aliases, Next: end aliases, Prev: Regex aliases, Up: Account aliases 1.11.1.3 Multiple aliases ......................... You can define as many aliases as you like using directives or command-line options. Aliases are recursive - each alias sees the result of applying previous ones. (This is different from Ledger, where aliases are non-recursive by default). Aliases are applied in the following order: 1. alias directives, most recently seen first (recent directives take precedence over earlier ones; directives not yet seen are ignored) 2. alias options, in the order they appear on the command line  File: hledger_journal.5.info, Node: end aliases, Prev: Multiple aliases, Up: Account aliases 1.11.1.4 end aliases .................... You can clear (forget) all currently defined aliases with the `end aliases' directive: end aliases  File: hledger_journal.5.info, Node: account directive, Next: apply account directive, Prev: Account aliases, Up: Directives 1.11.2 account directive ------------------------ The `account' directive predefines account names, as in Ledger and Beancount. This may be useful for your own documentation; hledger doesn't make use of it yet. ; account ACCT ; OPTIONAL COMMENTS/TAGS... account assets:bank:checking a comment acct-no:12345 account expenses:food ; etc.  File: hledger_journal.5.info, Node: apply account directive, Next: Multi-line comments, Prev: account directive, Up: Directives 1.11.3 apply account directive ------------------------------ You can specify a parent account which will be prepended to all accounts within a section of the journal. Use the `apply account' and `end apply account' directives like so: apply account home 2010/1/1 food $10 cash end apply account which is equivalent to: 2010/01/01 home:food $10 home:cash $-10 If `end apply account' is omitted, the effect lasts to the end of the file. Included files are also affected, eg: apply account business include biz.journal end apply account apply account personal include personal.journal Prior to hledger 1.0, legacy `account' and `end' spellings were also supported.  File: hledger_journal.5.info, Node: Multi-line comments, Next: commodity directive, Prev: apply account directive, Up: Directives 1.11.4 Multi-line comments -------------------------- A line containing just `comment' starts a multi-line comment, and a line containing just `end comment' ends it. See comments.  File: hledger_journal.5.info, Node: commodity directive, Next: Default commodity, Prev: Multi-line comments, Up: Directives 1.11.5 commodity directive -------------------------- The `commodity' directive predefines commodities (currently this is just informational), and also it may define the display format for amounts in this commodity (overriding the automatically inferred format). It may be written on a single line, like this: ; commodity EXAMPLEAMOUNT ; display AAAA amounts with the symbol on the right, space-separated, ; using period as decimal point, with four decimal places, and ; separating thousands with comma. commodity 1,000.0000 AAAA or on multiple lines, using the "format" subdirective. In this case the commodity symbol appears twice and should be the same in both places: ; commodity SYMBOL ; format EXAMPLEAMOUNT ; display indian rupees with currency name on the left, ; thousands, lakhs and crores comma-separated, ; period as decimal point, and two decimal places. commodity INR format INR 9,99,99,999.00  File: hledger_journal.5.info, Node: Default commodity, Next: Default year, Prev: commodity directive, Up: Directives 1.11.6 Default commodity ------------------------ The D directive sets a default commodity (and display format), to be used for amounts without a commodity symbol (ie, plain numbers). (Note this differs from Ledger's default commodity directive.) The commodity and display format will be applied to all subsequent commodity-less amounts, or until the next D directive. # commodity-less amounts should be treated as dollars # (and displayed with symbol on the left, thousands separators and two decimal places) D $1,000.00 1/1 a 5 # <- commodity-less amount, becomes $1 b  File: hledger_journal.5.info, Node: Default year, Next: Including other files, Prev: Default commodity, Up: Directives 1.11.7 Default year ------------------- You can set a default year to be used for subsequent dates which don't specify a year. This is a line beginning with `Y' followed by the year. Eg: Y2009 ; set default year to 2009 12/15 ; equivalent to 2009/12/15 expenses 1 assets Y2010 ; change default year to 2010 2009/1/30 ; specifies the year, not affected expenses 1 assets 1/31 ; equivalent to 2010/1/31 expenses 1 assets  File: hledger_journal.5.info, Node: Including other files, Prev: Default year, Up: Directives 1.11.8 Including other files ---------------------------- You can pull in the content of additional journal files by writing an include directive, like this: include path/to/file.journal If the path does not begin with a slash, it is relative to the current file. Glob patterns (`*') are not currently supported. The `include' directive can only be used in journal files. It can include journal, timeclock or timedot files, but not CSV files.  File: hledger_journal.5.info, Node: EDITOR SUPPORT, Prev: FILE FORMAT, Up: Top 2 EDITOR SUPPORT **************** Add-on modes exist for various text editors, to make working with journal files easier. They add colour, navigation aids and helpful commands. For hledger users who edit the journal file directly (the majority), using one of these modes is quite recommended. These were written with Ledger in mind, but also work with hledger files: Emacs http://www.ledger-cli.org/3.0/doc/ledger-mode.html Vim https://github.com/ledger/ledger/wiki/Getting-started Sublime Text https://github.com/ledger/ledger/wiki/Using-Sublime-Text Textmate https://github.com/ledger/ledger/wiki/Using-TextMate-2 Text Wrangler https://github.com/ledger/ledger/wiki/Editing-Ledger-files-with-TextWrangler  Tag Table: Node: Top94 Node: FILE FORMAT2284 Ref: #file-format2410 Node: Transactions2593 Ref: #transactions2713 Node: Dates3656 Ref: #dates3784 Node: Simple dates3849 Ref: #simple-dates3977 Node: Secondary dates4341 Ref: #secondary-dates4497 Node: Posting dates6057 Ref: #posting-dates6188 Node: Account names7559 Ref: #account-names7698 Node: Amounts8183 Ref: #amounts8321 Node: Virtual Postings10420 Ref: #virtual-postings10581 Node: Balance Assertions11801 Ref: #balance-assertions11978 Node: Assertions and ordering12800 Ref: #assertions-and-ordering12985 Node: Assertions and commodities14016 Ref: #assertions-and-commodities14242 Node: Assertions and subaccounts14934 Ref: #assertions-and-subaccounts15168 Node: Assertions and virtual postings15690 Ref: #assertions-and-virtual-postings15899 Node: Balance Assignments16040 Ref: #balance-assignments16209 Node: Prices17327 Ref: #prices17460 Node: Transaction prices17511 Ref: #transaction-prices17656 Node: Market prices19236 Ref: #market-prices19371 Node: Comments20371 Ref: #comments20493 Node: Tags21605 Ref: #tags21725 Node: Directives22648 Ref: #directives22763 Node: Account aliases22956 Ref: #account-aliases23102 Node: Basic aliases23704 Ref: #basic-aliases23849 Node: Regex aliases24537 Ref: #regex-aliases24707 Node: Multiple aliases25477 Ref: #multiple-aliases25651 Node: end aliases26147 Ref: #end-aliases26289 Node: account directive26391 Ref: #account-directive26573 Node: apply account directive26869 Ref: #apply-account-directive27067 Node: Multi-line comments27727 Ref: #multi-line-comments27919 Node: commodity directive28046 Ref: #commodity-directive28232 Node: Default commodity29105 Ref: #default-commodity29280 Node: Default year29816 Ref: #default-year29983 Node: Including other files30406 Ref: #including-other-files30565 Node: EDITOR SUPPORT30961 Ref: #editor-support31081  End Tag Table