This is hledger.1.info, produced by makeinfo version 6.0 from stdin.  File: hledger.1.info, Node: Top, Next: EXAMPLES, Up: (dir) hledger(1) hledger 1.2 ********************** This is hledger's command-line interface (there are also curses and web interfaces). Its basic function is to read a plain text file describing financial transactions (in accounting terms, a general journal) and print useful reports on standard output, or export them as CSV. hledger can also read some other file formats such as CSV files, translating them to journal format. Additionally, hledger lists other hledger-* executables found in the user's $PATH and can invoke them as subcommands. hledger reads data from one or more files in hledger journal, timeclock, timedot, or CSV format specified with '-f', or '$LEDGER_FILE', or '$HOME/.hledger.journal' (on windows, perhaps 'C:/Users/USER/.hledger.journal'). If using '$LEDGER_FILE', note this must be a real environment variable, not a shell variable. You can specify standard input with '-f-'. Transactions are dated movements of money between two (or more) named accounts, and are recorded with journal entries like this: 2015/10/16 bought food expenses:food $10 assets:cash For more about this format, see hledger_journal(5). Most users use a text editor to edit the journal, usually with an editor mode such as ledger-mode for added convenience. hledger's interactive add command is another way to record new transactions. hledger never changes existing transactions. To get started, you can either save some entries like the above in '~/.hledger.journal', or run 'hledger add' and follow the prompts. Then try some commands like 'hledger print' or 'hledger balance'. Run 'hledger' with no arguments for a list of commands. * Menu: * EXAMPLES:: * OPTIONS:: * QUERIES:: * COMMANDS:: * ADD-ON COMMANDS::  File: hledger.1.info, Node: EXAMPLES, Next: OPTIONS, Prev: Top, Up: Top 1 EXAMPLES ********** Two simple transactions in hledger journal format: 2015/9/30 gift received assets:cash $20 income:gifts 2015/10/16 farmers market expenses:food $10 assets:cash Some basic reports: $ hledger print 2015/09/30 gift received assets:cash $20 income:gifts $-20 2015/10/16 farmers market expenses:food $10 assets:cash $-10 $ hledger accounts --tree assets cash expenses food income gifts $ hledger balance $10 assets:cash $10 expenses:food $-20 income:gifts -------------------- 0 $ hledger register cash 2015/09/30 gift received assets:cash $20 $20 2015/10/16 farmers market assets:cash $-10 $10 More commands: $ hledger # show available commands $ hledger add # add more transactions to the journal file $ hledger balance # all accounts with aggregated balances $ hledger balance --help # show detailed help for balance command $ hledger balance --depth 1 # only top-level accounts $ hledger register # show account postings, with running total $ hledger reg income # show postings to/from income accounts $ hledger reg 'assets:some bank:checking' # show postings to/from this checking account $ hledger print desc:shop # show transactions with shop in the description $ hledger activity -W # show transaction counts per week as a bar chart  File: hledger.1.info, Node: OPTIONS, Next: QUERIES, Prev: EXAMPLES, Up: Top 2 OPTIONS ********* * Menu: * General options:: * Command options:: * Command arguments:: * Special characters:: * Input files:: * Smart dates:: * Report start & end date:: * Report intervals:: * Period expressions:: * Depth limiting:: * Pivoting:: * Regular expressions::  File: hledger.1.info, Node: General options, Next: Command options, Up: OPTIONS 2.1 General options =================== To see general usage help, including general options which are supported by most hledger commands, run 'hledger -h'. (Note -h and -help are different, like git.) General help options: '-h' show general usage (or after COMMAND, command usage) '--help' show this program's manual as plain text (or after an add-on COMMAND, the add-on's manual) '--man' show this program's manual with man '--info' show this program's manual with info '--version' show version '--debug[=N]' show debug output (levels 1-9, default: 1) General input options: '-f FILE --file=FILE' use a different input file. For stdin, use - (default: '$LEDGER_FILE' or '$HOME/.hledger.journal') '--rules-file=RULESFILE' Conversion rules file to use when reading CSV (default: FILE.rules) '--alias=OLD=NEW' rename accounts named OLD to NEW '--anon' anonymize accounts and payees '--pivot TAGNAME' use some other field/tag for account names '-I --ignore-assertions' ignore any failing balance assertions General reporting options: '-b --begin=DATE' include postings/txns on or after this date '-e --end=DATE' include postings/txns before this date '-D --daily' multiperiod/multicolumn report by day '-W --weekly' multiperiod/multicolumn report by week '-M --monthly' multiperiod/multicolumn report by month '-Q --quarterly' multiperiod/multicolumn report by quarter '-Y --yearly' multiperiod/multicolumn report by year '-p --period=PERIODEXP' set start date, end date, and/or reporting interval all at once (overrides the flags above) '--date2' show, and match with -b/-e/-p/date:, secondary dates instead '-C --cleared' include only cleared postings/txns '--pending' include only pending postings/txns '-U --uncleared' include only uncleared (and pending) postings/txns '-R --real' include only non-virtual postings '--depth=N' hide accounts/postings deeper than N '-E --empty' show items with zero amount, normally hidden '-B --cost' convert amounts to their cost at transaction time (using the transaction price, if any) '-V --value' convert amounts to their market value on the report end date (using the most recent applicable market price, if any) Note when multiple similar reporting options are provided, the last one takes precedence. Eg '-p feb -p mar' is equivalent to '-p mar'. Some of these can also be written as queries.  File: hledger.1.info, Node: Command options, Next: Command arguments, Prev: General options, Up: OPTIONS 2.2 Command options =================== To see options for a particular command, including command-specific options, run: 'hledger COMMAND -h'. Command-specific options must be written after the command name, eg: 'hledger print -x'. Additionally, if the command is an addon, you may need to put its options after a double-hyphen, eg: 'hledger ui -- --watch'. Or, you can run the addon executable directly: 'hledger-ui --watch'.  File: hledger.1.info, Node: Command arguments, Next: Special characters, Prev: Command options, Up: OPTIONS 2.3 Command arguments ===================== Most hledger commands accept arguments after the command name, which are often a query, filtering the data in some way.  File: hledger.1.info, Node: Special characters, Next: Input files, Prev: Command arguments, Up: OPTIONS 2.4 Special characters ====================== Option and argument values which contain problematic characters should be escaped with double quotes, backslashes, or (best) single quotes. Problematic characters means spaces, and also characters which are significant to your command shell, such as less-than/greater-than. Eg: 'hledger register -p 'last year' "accounts receivable (receivable|payable)" amt:\>100'. Characters which are significant both to the shell and in regular expressions sometimes need to be double-escaped. These include parentheses, the pipe symbol and the dollar sign. Eg, to match the dollar symbol, bash users should do: 'hledger balance cur:'\$'' or 'hledger balance cur:\\$'. There's more.. options and arguments get de-escaped when hledger is passing them to an addon executable. In this case you might need _triple_-escaping. Eg: 'hledger ui cur:'\\$'' or 'hledger ui cur:\\\\$'. If in doubt, keep things simple: * run add-on executables directly * write options after the command * enclose problematic args in single quotes * if needed, also add a backslash to escape regexp metacharacters If you're really stumped, add '--debug=2' to troubleshoot.  File: hledger.1.info, Node: Input files, Next: Smart dates, Prev: Special characters, Up: OPTIONS 2.5 Input files =============== hledger reads transactions from a data file (and the add command writes to it). By default this file is '$HOME/.hledger.journal' (or on Windows, something like 'C:/Users/USER/.hledger.journal'). You can override this with the '$LEDGER_FILE' environment variable: $ setenv LEDGER_FILE ~/finance/2016.journal $ hledger stats or with the '-f/--file' option: $ hledger -f /some/file stats The file name '-' (hyphen) means standard input: $ cat some.journal | hledger -f- Usually the data file is in hledger's journal format, but it can also be one of several other formats, listed below. hledger detects the format automatically based on the file extension, or if that is not recognised, by trying each built-in "reader" in turn: Reader: Reads: Used for file extensions: --------------------------------------------------------------------------- 'journal' hledger's journal format, also '.journal' '.j' some Ledger journals '.hledger' '.ledger' 'timeclock' timeclock files (precise time '.timeclock' logging) 'timedot' timedot files (approximate time '.timedot' logging) 'csv' comma-separated values (data '.csv' interchange) If needed (eg to ensure correct error messages when a file has the "wrong" extension), you can force a specific reader/format by prepending it to the file path with a colon. Examples: $ hledger -f csv:/some/csv-file.dat stats $ echo 'i 2009/13/1 08:00:00' | hledger print -ftimeclock:- You can also specify multiple '-f' options, to read multiple files as one big journal. There are some limitations with this: * directives in one file will not affect the other files * balance assertions will not see any account balances from previous files If you need those, either use the include directive, or concatenate the files, eg: 'cat a.journal b.journal | hledger -f- CMD'.  File: hledger.1.info, Node: Smart dates, Next: Report start & end date, Prev: Input files, Up: OPTIONS 2.6 Smart dates =============== hledger's user interfaces accept a flexible "smart date" syntax (unlike dates in the journal file). Smart dates allow some english words, can be relative to today's date, and can have less-significant date parts omitted (defaulting to 1). Examples: '2009/1/1', '2009/01/01', '2009-1-1', '2009.1.1' simple dates, several separators allowed '2009/1', '2009' same as above - a missing day or month defaults to 1 '1/1', 'january', 'jan', 'this year' relative dates, meaning january 1 of the current year 'next year' january 1 of next year 'this month' the 1st of the current month 'this week' the most recent monday 'last week' the monday of the week before this one 'lastweek' spaces are optional 'today', 'yesterday', 'tomorrow'  File: hledger.1.info, Node: Report start & end date, Next: Report intervals, Prev: Smart dates, Up: OPTIONS 2.7 Report start & end date =========================== Most hledger reports show the full span of time represented by the journal data, by default. So, the effective report start and end dates will be the earliest and latest transaction or posting dates found in the journal. Often you will want to see a shorter time span, such as the current month. You can specify a start and/or end date using '-b/--begin', '-e/--end', '-p/--period' or a 'date:' query (described below). All of these accept the smart date syntax. One important thing to be aware of when specifying end dates: as in Ledger, end dates are exclusive, so you need to write the date _after_ the last day you want to include. Examples: '-b 2016/3/17' begin on St. Patrick's day 2016 '-e 12/1' end at the start of december 1st of the current year (11/30 will be the last date included) '-b thismonth' all transactions on or after the 1st of the current month '-p thismonth' all transactions in the current month 'date:2016/3/17-' the above written as queries instead 'date:-12/1' 'date:thismonth-' 'date:thismonth'  File: hledger.1.info, Node: Report intervals, Next: Period expressions, Prev: Report start & end date, Up: OPTIONS 2.8 Report intervals ==================== A report interval can be specified so that commands like register, balance and activity will divide their reports into multiple subperiods. The basic intervals can be selected with one of '-D/--daily', '-W/--weekly', '-M/--monthly', '-Q/--quarterly', or '-Y/--yearly'. More complex intervals may be specified with a period expression. Report intervals can not be specified with a query, currently.  File: hledger.1.info, Node: Period expressions, Next: Depth limiting, Prev: Report intervals, Up: OPTIONS 2.9 Period expressions ====================== The '-p/--period' option accepts period expressions, a shorthand way of expressing a start date, end date, and/or report interval all at once. Here's a basic period expression specifying the first quarter of 2009. Note, hledger always treats start dates as inclusive and end dates as exclusive: '-p "from 2009/1/1 to 2009/4/1"' Keywords like "from" and "to" are optional, and so are the spaces, as long as you don't run two dates together. "to" can also be written as "-". These are equivalent to the above: '-p "2009/1/1 2009/4/1"' '-p2009/1/1to2009/4/1' '-p2009/1/1-2009/4/1' Dates are smart dates, so if the current year is 2009, the above can also be written as: '-p "1/1 4/1"' '-p "january-apr"' '-p "this year to 4/1"' If you specify only one date, the missing start or end date will be the earliest or latest transaction in your journal: '-p "from 2009/1/1"' everything after january 1, 2009 '-p "from 2009/1"' the same '-p "from 2009"' the same '-p "to 2009"' everything before january 1, 2009 A single date with no "from" or "to" defines both the start and end date like so: '-p "2009"' the year 2009; equivalent to "2009/1/1 to 2010/1/1" '-p "2009/1"' the month of jan; equivalent to "2009/1/1 to 2009/2/1" '-p "2009/1/1"' just that day; equivalent to "2009/1/1 to 2009/1/2" The argument of '-p' can also begin with, or be, a report interval expression. The basic report intervals are 'daily', 'weekly', 'monthly', 'quarterly', or 'yearly', which have the same effect as the '-D','-W','-M','-Q', or '-Y' flags. Between report interval and start/end dates (if any), the word 'in' is optional. Examples: '-p "weekly from 2009/1/1 to 2009/4/1"' '-p "monthly in 2008"' '-p "quarterly"' The following more complex report intervals are also supported: 'biweekly', 'bimonthly', 'every N days|weeks|months|quarters|years', 'every Nth day [of month]', 'every Nth day of week'. Examples: '-p "bimonthly from 2008"' '-p "every 2 weeks"' '-p "every 5 days from 1/3"' Show historical balances at end of 15th each month (N is exclusive end date): 'hledger balance -H -p "every 16th day"' Group postings from start of wednesday to end of next tuesday (N is start date and exclusive end date): 'hledger register checking -p "every 3rd day of week"'  File: hledger.1.info, Node: Depth limiting, Next: Pivoting, Prev: Period expressions, Up: OPTIONS 2.10 Depth limiting =================== With the '--depth N' option, commands like account, balance and register will show only the uppermost accounts in the account tree, down to level N. Use this when you want a summary with less detail.  File: hledger.1.info, Node: Pivoting, Next: Regular expressions, Prev: Depth limiting, Up: OPTIONS 2.11 Pivoting ============= Normally hledger sums amounts, and organizes them in a hierarchy, based on account name. The '--pivot TAGNAME' option causes it to sum and organize hierarchy based on some other field instead. TAGNAME is the full, case-insensitive name of a tag you have defined, or one of the built-in implicit tags (like 'code' or 'payee'). As with account names, when tag values have 'multiple:colon-separated:parts' hledger will build hierarchy, displayed in tree-mode reports, summarisable with a depth limit, and so on. '--pivot' is a general option affecting all reports; you can think of hledger transforming the journal before any other processing, replacing every posting's account name with the value of the specified tag on that posting, inheriting it from the transaction or using a blank value if it's not present. An example: 2016/02/16 Member Fee Payment assets:bank account 2 EUR income:member fees -2 EUR ; member: John Doe Normal balance report showing account names: $ hledger balance 2 EUR assets:bank account -2 EUR income:member fees -------------------- 0 Pivoted balance report, using member: tag values instead: $ hledger balance --pivot member 2 EUR -2 EUR John Doe -------------------- 0 One way to show only amounts with a member: value (using a query, described below): $ hledger balance --pivot member tag:member=. -2 EUR John Doe -------------------- -2 EUR Another way (the acct: query matches against the pivoted "account name"): $ hledger balance --pivot member acct:. -2 EUR John Doe -------------------- -2 EUR  File: hledger.1.info, Node: Regular expressions, Prev: Pivoting, Up: OPTIONS 2.12 Regular expressions ======================== hledger uses regular expressions in a number of places: * query terms, on the command line and in the hledger-web search form: 'REGEX', 'desc:REGEX', 'cur:REGEX', 'tag:...=REGEX' * CSV rules conditional blocks: 'if REGEX ...' * account alias directives and options: 'alias /REGEX/ = REPLACEMENT', '--alias /REGEX/=REPLACEMENT' hledger's regular expressions come from the regex-tdfa library. In general they: * are case insensitive * are infix matching (do not need to match the entire thing being matched) * are POSIX extended regular expressions * also support GNU word boundaries (\<, \>, \b, \B) * and parenthesised capturing groups and numeric backreferences in replacement strings * do not support mode modifiers like (?s) Some things to note: * In the 'alias' directive and '--alias' option, regular expressions must be enclosed in forward slashes ('/REGEX/'). Elsewhere in hledger, these are not required. * In queries, to match a regular expression metacharacter like '$' as a literal character, prepend a backslash. Eg to search for amounts with the dollar sign in hledger-web, write 'cur:\$'. * On the command line, some metacharacters like '$' have a special meaning to the shell and so must be escaped at least once more. See Special characters.  File: hledger.1.info, Node: QUERIES, Next: COMMANDS, Prev: OPTIONS, Up: Top 3 QUERIES ********* One of hledger's strengths is being able to quickly report on precise subsets of your data. Most commands accept an optional query expression, written as arguments after the command name, to filter the data by date, account name or other criteria. The syntax is similar to a web search: one or more space-separated search terms, quotes to enclose whitespace, optional prefixes to match specific fields. Multiple search terms are combined as follows: All commands except print: show transactions/postings/accounts which match (or negatively match) * any of the description terms AND * any of the account terms AND * all the other terms. The print command: show transactions which * match any of the description terms AND * have any postings matching any of the positive account terms AND * have no postings matching any of the negative account terms AND * match all the other terms. The following kinds of search terms can be used: *'REGEX'* match account names by this regular expression *'acct:REGEX'* same as above *'amt:N, amt:N, amt:>=N'* match postings with a single-commodity amount that is equal to, less than, or greater than N. (Multi-commodity amounts are not tested, and will always match.) The comparison has two modes: if N is preceded by a + or - sign (or is 0), the two signed numbers are compared. Otherwise, the absolute magnitudes are compared, ignoring sign. *'code:REGEX'* match by transaction code (eg check number) *'cur:REGEX'* match postings or transactions including any amounts whose currency/commodity symbol is fully matched by REGEX. (For a partial match, use '.*REGEX.*'). Note, to match characters which are regex-significant, like the dollar sign ('$'), you need to prepend '\'. And when using the command line you need to add one more level of quoting to hide it from the shell, so eg do: 'hledger print cur:'\$'' or 'hledger print cur:\\$'. *'desc:REGEX'* match transaction descriptions *'date:PERIODEXPR'* match dates within the specified period. PERIODEXPR is a period expression (with no report interval). Examples: 'date:2016', 'date:thismonth', 'date:2000/2/1-2/15', 'date:lastweek-'. If the '--date2' command line flag is present, this matches secondary dates instead. *'date2:PERIODEXPR'* match secondary dates within the specified period. *'depth:N'* match (or display, depending on command) accounts at or above this depth *'real:, real:0'* match real or virtual postings respectively *'status:*, status:!, status:'* match cleared, pending, or uncleared/pending transactions respectively *'tag:REGEX[=REGEX]'* match by tag name, and optionally also by tag value. Note a tag: query is considered to match a transaction if it matches any of the postings. Also remember that postings inherit the tags of their parent transaction. *'not:'* before any of the above negates the match. *'inacct:ACCTNAME'* a special term used automatically when you click an account name in hledger-web, specifying the account register we are currently in (selects the transactions of that account and how to show them, can be filtered further with 'acct' etc). Not supported elsewhere in hledger. Some of these can also be expressed as command-line options (eg 'depth:2' is equivalent to '--depth 2'). Generally you can mix options and query arguments, and the resulting query will be their intersection (perhaps excluding the '-p/--period' option).  File: hledger.1.info, Node: COMMANDS, Next: ADD-ON COMMANDS, Prev: QUERIES, Up: Top 4 COMMANDS ********** hledger provides a number of subcommands; 'hledger' with no arguments shows a list. If you install additional 'hledger-*' packages, or if you put programs or scripts named 'hledger-NAME' in your PATH, these will also be listed as subcommands. Run a subcommand by writing its name as first argument (eg 'hledger incomestatement'). You can also write any unambiguous prefix of a command name ('hledger inc'), or one of the standard short aliases displayed in the command list ('hledger is'). * Menu: * accounts:: * activity:: * add:: * balance:: * balancesheet:: * cashflow:: * help:: * incomestatement:: * info:: * man:: * print:: * register:: * stats:: * test::  File: hledger.1.info, Node: accounts, Next: activity, Up: COMMANDS 4.1 accounts ============ Show account names. '--tree' show short account names, as a tree '--flat' show full account names, as a list (default) '--drop=N' in flat mode: omit N leading account name parts This command lists all account names that are in use (ie, all the accounts which have at least one transaction posting to them). With query arguments, only matched account names are shown. It shows a flat list by default. With '--tree', it uses indentation to show the account hierarchy. In flat mode you can add '--drop N' to omit the first few account name components. Examples: $ hledger accounts --tree assets bank checking saving cash expenses food supplies income gifts salary liabilities debts $ hledger accounts --drop 1 bank:checking bank:saving cash food supplies gifts salary debts $ hledger accounts assets:bank:checking assets:bank:saving assets:cash expenses:food expenses:supplies income:gifts income:salary liabilities:debts  File: hledger.1.info, Node: activity, Next: add, Prev: accounts, Up: COMMANDS 4.2 activity ============ Show an ascii barchart of posting counts per interval. The activity command displays an ascii histogram showing transaction counts by day, week, month or other reporting interval (by day is the default). With query arguments, it counts only matched transactions. $ hledger activity --quarterly 2008-01-01 ** 2008-04-01 ******* 2008-07-01 2008-10-01 **  File: hledger.1.info, Node: add, Next: balance, Prev: activity, Up: COMMANDS 4.3 add ======= Prompt for transactions and add them to the journal. '--no-new-accounts' don't allow creating new accounts; helps prevent typos when entering account names Many hledger users edit their journals directly with a text editor, or generate them from CSV. For more interactive data entry, there is the 'add' command, which prompts interactively on the console for new transactions, and appends them to the journal file (if there are multiple '-f FILE' options, the first file is used.) Existing transactions are not changed. This is the only hledger command that writes to the journal file. To use it, just run 'hledger add' and follow the prompts. You can add as many transactions as you like; when you are finished, enter '.' or press control-d or control-c to exit. Features: * add tries to provide useful defaults, using the most similar recent transaction (by description) as a template. * You can also set the initial defaults with command line arguments. * Readline-style edit keys can be used during data entry. * The tab key will auto-complete whenever possible - accounts, descriptions, dates ('yesterday', 'today', 'tomorrow'). If the input area is empty, it will insert the default value. * If the journal defines a default commodity, it will be added to any bare numbers entered. * A parenthesised transaction code may be entered following a date. * Comments and tags may be entered following a description or amount. * If you make a mistake, enter '<' at any prompt to restart the transaction. * Input prompts are displayed in a different colour when the terminal supports it. Example (see the tutorial for a detailed explanation): $ hledger add Adding transactions to journal file /src/hledger/examples/sample.journal Any command line arguments will be used as defaults. Use tab key to complete, readline keys to edit, enter to accept defaults. An optional (CODE) may follow transaction dates. An optional ; COMMENT may follow descriptions or amounts. If you make a mistake, enter < at any prompt to restart the transaction. To end a transaction, enter . when prompted. To quit, enter . at a date prompt or press control-d or control-c. Date [2015/05/22]: Description: supermarket Account 1: expenses:food Amount 1: $10 Account 2: assets:checking Amount 2 [$-10.0]: Account 3 (or . or enter to finish this transaction): . 2015/05/22 supermarket expenses:food $10 assets:checking $-10.0 Save this transaction to the journal ? [y]: Saved. Starting the next transaction (. or ctrl-D/ctrl-C to quit) Date [2015/05/22]: $  File: hledger.1.info, Node: balance, Next: balancesheet, Prev: add, Up: COMMANDS 4.4 balance =========== Show accounts and their balances. Alias: bal. '--change' show balance change in each period (default) '--cumulative' show balance change accumulated across periods (in multicolumn reports) '-H --historical' show historical ending balance in each period (includes postings before report start date) '--tree' show accounts as a tree; amounts include subaccounts (default in simple reports) '--flat' show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports) '-A --average' show a row average column (in multicolumn mode) '-T --row-total' show a row total column (in multicolumn mode) '-N --no-total' don't show the final total row '--drop=N' omit N leading account name parts (in flat mode) '--no-elide' don't squash boring parent accounts (in tree mode) '--format=LINEFORMAT' in single-column balance reports: use this custom line format '-O FMT --output-format=FMT' select the output format. Supported formats: txt, csv. '-o FILE --output-file=FILE' write output to FILE. A file extension matching one of the above formats selects that format. '--pretty-tables' Use unicode to display prettier tables. The balance command displays accounts and balances. It is hledger's most featureful and most useful command. $ hledger balance $-1 assets $1 bank:saving $-2 cash $2 expenses $1 food $1 supplies $-2 income $-1 gifts $-1 salary $1 liabilities:debts -------------------- 0 More precisely, the balance command shows the _change_ to each account's balance caused by all (matched) postings. In the common case where you do not filter by date and your journal sets the correct opening balances, this is the same as the account's ending balance. By default, accounts are displayed hierarchically, with subaccounts indented below their parent. "Boring" accounts, which contain a single interesting subaccount and no balance of their own, are elided into the following line for more compact output. (Use '--no-elide' to prevent this.) Each account's balance is the "inclusive" balance - it includes the balances of any subaccounts. Accounts which have zero balance (and no non-zero subaccounts) are omitted. Use '-E/--empty' to show them. A final total is displayed by default; use '-N/--no-total' to suppress it: $ hledger balance -p 2008/6 expenses --no-total $2 expenses $1 food $1 supplies * Menu: * Flat mode:: * Depth limited balance reports:: * Multicolumn balance reports:: * Market value:: * Custom balance output:: * Output destination:: * CSV output::  File: hledger.1.info, Node: Flat mode, Next: Depth limited balance reports, Up: balance 4.4.1 Flat mode --------------- To see a flat list of full account names instead of the default hierarchical display, use '--flat'. In this mode, accounts (unless depth-clipped) show their "exclusive" balance, excluding any subaccount balances. In this mode, you can also use '--drop N' to omit the first few account name components. $ hledger balance -p 2008/6 expenses -N --flat --drop 1 $1 food $1 supplies  File: hledger.1.info, Node: Depth limited balance reports, Next: Multicolumn balance reports, Prev: Flat mode, Up: balance 4.4.2 Depth limited balance reports ----------------------------------- With '--depth N', balance shows accounts only to the specified depth. This is very useful to show a complex charts of accounts in less detail. In flat mode, balances from accounts below the depth limit will be shown as part of a parent account at the depth limit. $ hledger balance -N --depth 1 $-1 assets $2 expenses $-2 income $1 liabilities  File: hledger.1.info, Node: Multicolumn balance reports, Next: Market value, Prev: Depth limited balance reports, Up: balance 4.4.3 Multicolumn balance reports --------------------------------- With a reporting interval, multiple balance columns will be shown, one for each report period. There are three types of multi-column balance report, showing different information: 1. By default: each column shows the sum of postings in that period, ie the account's change of balance in that period. This is useful eg for a monthly income statement: $ hledger balance --quarterly income expenses -E Balance changes in 2008: || 2008q1 2008q2 2008q3 2008q4 ===================++================================= expenses:food || 0 $1 0 0 expenses:supplies || 0 $1 0 0 income:gifts || 0 $-1 0 0 income:salary || $-1 0 0 0 -------------------++--------------------------------- || $-1 $1 0 0 2. With '--cumulative': each column shows the ending balance for that period, accumulating the changes across periods, starting from 0 at the report start date: $ hledger balance --quarterly income expenses -E --cumulative Ending balances (cumulative) in 2008: || 2008/03/31 2008/06/30 2008/09/30 2008/12/31 ===================++================================================= expenses:food || 0 $1 $1 $1 expenses:supplies || 0 $1 $1 $1 income:gifts || 0 $-1 $-1 $-1 income:salary || $-1 $-1 $-1 $-1 -------------------++------------------------------------------------- || $-1 0 0 0 3. With '--historical/-H': each column shows the actual historical ending balance for that period, accumulating the changes across periods, starting from the actual balance at the report start date. This is useful eg for a multi-period balance sheet, and when you are showing only the data after a certain start date: $ hledger balance ^assets ^liabilities --quarterly --historical --begin 2008/4/1 Ending balances (historical) in 2008/04/01-2008/12/31: || 2008/06/30 2008/09/30 2008/12/31 ======================++===================================== assets:bank:checking || $1 $1 0 assets:bank:saving || $1 $1 $1 assets:cash || $-2 $-2 $-2 liabilities:debts || 0 0 $1 ----------------------++------------------------------------- || 0 0 0 Multi-column balance reports display accounts in flat mode by default; to see the hierarchy, use '--tree'. With a reporting interval (like '--quarterly' above), the report start/end dates will be adjusted if necessary so that they encompass the displayed report periods. This is so that the first and last periods will be "full" and comparable to the others. The '-E/--empty' flag does two things in multicolumn balance reports: first, the report will show all columns within the specified report period (without -E, leading and trailing columns with all zeroes are not shown). Second, all accounts which existed at the report start date will be considered, not just the ones with activity during the report period (use -E to include low-activity accounts which would otherwise would be omitted). The '-T/--row-total' flag adds an additional column showing the total for each row. The '-A/--average' flag adds a column showing the average value in each row. Here's an example of all three: $ hledger balance -Q income expenses --tree -ETA Balance changes in 2008: || 2008q1 2008q2 2008q3 2008q4 Total Average ============++=================================================== expenses || 0 $2 0 0 $2 $1 food || 0 $1 0 0 $1 0 supplies || 0 $1 0 0 $1 0 income || $-1 $-1 0 0 $-2 $-1 gifts || 0 $-1 0 0 $-1 0 salary || $-1 0 0 0 $-1 0 ------------++--------------------------------------------------- || $-1 $1 0 0 0 0 # Average is rounded to the dollar here since all journal amounts are  File: hledger.1.info, Node: Market value, Next: Custom balance output, Prev: Multicolumn balance reports, Up: balance 4.4.4 Market value ------------------ The '-V/--value' flag converts the reported amounts to their market value on the report end date, using the most recent applicable market prices, when known. Specifically, when there is a market price (P directive) for the amount's commodity, dated on or before the report end date (see hledger -> Report start & end date), the amount will be converted to the price's commodity. If multiple applicable prices are defined, the latest-dated one is used (and if dates are equal, the one last parsed). For example: # one euro is worth this many dollars from nov 1 P 2016/11/01 € $1.10 # purchase some euros on nov 3 2016/11/3 assets:euros €100 assets:checking # the euro is worth fewer dollars by dec 21 P 2016/12/21 € $1.03 How many euros do I have ? $ hledger -f t.j bal euros €100 assets:euros What are they worth on nov 3 ? (no report end date specified, defaults to the last date in the journal) $ hledger -f t.j bal euros -V $110.00 assets:euros What are they worth on dec 21 ? $ hledger -f t.j bal euros -V -e 2016/12/21 $103.00 assets:euros Currently, hledger's -V only uses market prices recorded with P directives, not transaction prices (unlike Ledger). Using -B and -V together is allowed.  File: hledger.1.info, Node: Custom balance output, Next: Output destination, Prev: Market value, Up: balance 4.4.5 Custom balance output --------------------------- In simple (non-multi-column) balance reports, you can customise the output with '--format FMT': $ hledger balance --format "%20(account) %12(total)" assets $-1 bank:saving $1 cash $-2 expenses $2 food $1 supplies $1 income $-2 gifts $-1 salary $-1 liabilities:debts $1 --------------------------------- 0 The FMT format string (plus a newline) specifies the formatting applied to each account/balance pair. It may contain any suitable text, with data fields interpolated like so: '%[MIN][.MAX](FIELDNAME)' * MIN pads with spaces to at least this width (optional) * MAX truncates at this width (optional) * FIELDNAME must be enclosed in parentheses, and can be one of: * 'depth_spacer' - a number of spaces equal to the account's depth, or if MIN is specified, MIN * depth spaces. * 'account' - the account's name * 'total' - the account's balance/posted total, right justified Also, FMT can begin with an optional prefix to control how multi-commodity amounts are rendered: * '%_' - render on multiple lines, bottom-aligned (the default) * '%^' - render on multiple lines, top-aligned * '%,' - render on one line, comma-separated There are some quirks. Eg in one-line mode, '%(depth_spacer)' has no effect, instead '%(account)' has indentation built in. Experimentation may be needed to get pleasing results. Some example formats: * '%(total)' - the account's total * '%-20.20(account)' - the account's name, left justified, padded to 20 characters and clipped at 20 characters * '%,%-50(account) %25(total)' - account name padded to 50 characters, total padded to 20 characters, with multiple commodities rendered on one line * '%20(total) %2(depth_spacer)%-(account)' - the default format for the single-column balance report  File: hledger.1.info, Node: Output destination, Next: CSV output, Prev: Custom balance output, Up: balance 4.4.6 Output destination ------------------------ The balance, print, register and stats commands can write their output to a destination other than the console. This is controlled by the '-o/--output-file' option. $ hledger balance -o - # write to stdout (the default) $ hledger balance -o FILE # write to FILE  File: hledger.1.info, Node: CSV output, Prev: Output destination, Up: balance 4.4.7 CSV output ---------------- The balance, print and register commands can write their output as CSV. This is useful for exporting data to other applications, eg to make charts in a spreadsheet. This is controlled by the '-O/--output-format' option, or by specifying a '.csv' file extension with '-o/--output-file'. $ hledger balance -O csv # write CSV to stdout $ hledger balance -o FILE.csv # write CSV to FILE.csv  File: hledger.1.info, Node: balancesheet, Next: cashflow, Prev: balance, Up: COMMANDS 4.5 balancesheet ================ Show a balance sheet. Alias: bs. '--change' show balance change in each period, instead of historical ending balances '--cumulative' show balance change accumulated across periods (in multicolumn reports), instead of historical ending balances '-H --historical' show historical ending balance in each period (includes postings before report start date) (default) '--tree' show accounts as a tree; amounts include subaccounts (default in simple reports) '--flat' show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports) '-A --average' show a row average column (in multicolumn mode) '-T --row-total' show a row total column (in multicolumn mode) '-N --no-total' don't show the final total row '--drop=N' omit N leading account name parts (in flat mode) '--no-elide' don't squash boring parent accounts (in tree mode) '--format=LINEFORMAT' in single-column balance reports: use this custom line format This command displays a simple balance sheet. It currently assumes that you have top-level accounts named 'asset' and 'liability' (plural forms also allowed.) $ hledger balancesheet Balance Sheet Assets: $-1 assets $1 bank:saving $-2 cash -------------------- $-1 Liabilities: $1 liabilities:debts -------------------- $1 Total: -------------------- 0 With a reporting interval, multiple columns will be shown, one for each report period. As with multicolumn balance reports, you can alter the report mode with '--change'/'--cumulative'/'--historical'. Normally balancesheet shows historical ending balances, which is what you need for a balance sheet; note this means it ignores report begin dates.  File: hledger.1.info, Node: cashflow, Next: help, Prev: balancesheet, Up: COMMANDS 4.6 cashflow ============ Show a cashflow statement. Alias: cf. '--change' show balance change in each period (default) '--cumulative' show balance change accumulated across periods (in multicolumn reports), instead of changes during periods '-H --historical' show historical ending balance in each period (includes postings before report start date), instead of changes during each period '--tree' show accounts as a tree; amounts include subaccounts (default in simple reports) '--flat' show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports) '-A --average' show a row average column (in multicolumn mode) '-T --row-total' show a row total column (in multicolumn mode) '-N --no-total' don't show the final total row (in simple reports) '--drop=N' omit N leading account name parts (in flat mode) '--no-elide' don't squash boring parent accounts (in tree mode) '--format=LINEFORMAT' in single-column balance reports: use this custom line format This command displays a simple cashflow statement It shows the change in all "cash" (ie, liquid assets) accounts for the period. It currently assumes that cash accounts are under a top-level account named 'asset' and do not contain 'receivable' or 'A/R' (plural forms also allowed.) $ hledger cashflow Cashflow Statement Cash flows: $-1 assets $1 bank:saving $-2 cash -------------------- $-1 Total: -------------------- $-1 With a reporting interval, multiple columns will be shown, one for each report period. Normally cashflow shows changes in assets per period, though as with multicolumn balance reports you can alter the report mode with '--change'/'--cumulative'/'--historical'.  File: hledger.1.info, Node: help, Next: incomestatement, Prev: cashflow, Up: COMMANDS 4.7 help ======== Show any of the hledger manuals. The 'help' command displays any of the main hledger man pages. (Unlike 'hledger --help', which displays only the hledger man page.) Run it with no arguments to list available topics (their names are shortened for easier typing), and run 'hledger help TOPIC' to select one. The output is similar to a man page, but fixed width. It may be long, so you may wish to pipe it into a pager. See also info and man. $ hledger help Choose a topic, eg: hledger help cli cli, ui, web, api, journal, csv, timeclock, timedot $ hledger help cli | less hledger(1) hledger User Manuals hledger(1) NAME hledger - a command-line accounting tool SYNOPSIS hledger [-f FILE] COMMAND [OPTIONS] [CMDARGS] hledger [-f FILE] ADDONCMD -- [OPTIONS] [CMDARGS] :  File: hledger.1.info, Node: incomestatement, Next: info, Prev: help, Up: COMMANDS 4.8 incomestatement =================== Show an income statement. Alias: is. '--change' show balance change in each period (default) '--cumulative' show balance change accumulated across periods (in multicolumn reports), instead of changes during periods '-H --historical' show historical ending balance in each period (includes postings before report start date), instead of changes during each period '--tree' show accounts as a tree; amounts include subaccounts (default in simple reports) '--flat' show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports) '-A --average' show a row average column (in multicolumn mode) '-T --row-total' show a row total column (in multicolumn mode) '-N --no-total' don't show the final total row '--drop=N' omit N leading account name parts (in flat mode) '--no-elide' don't squash boring parent accounts (in tree mode) '--format=LINEFORMAT' in single-column balance reports: use this custom line format This command displays a simple income statement. It currently assumes that you have top-level accounts named 'income' (or 'revenue') and 'expense' (plural forms also allowed.) $ hledger incomestatement Income Statement Revenues: $-2 income $-1 gifts $-1 salary -------------------- $-2 Expenses: $2 expenses $1 food $1 supplies -------------------- $2 Total: -------------------- 0 With a reporting interval, multiple columns will be shown, one for each report period. Normally incomestatement shows revenues/expenses per period, though as with multicolumn balance reports you can alter the report mode with '--change'/'--cumulative'/'--historical'.  File: hledger.1.info, Node: info, Next: man, Prev: incomestatement, Up: COMMANDS 4.9 info ======== Show any of the hledger manuals using info. The 'info' command displays any of the hledger reference manuals using the info hypertextual documentation viewer. This can be a very efficient way to browse large manuals. It requires the "info" program to be available in your PATH. As with help, run it with no arguments to list available topics (manuals).  File: hledger.1.info, Node: man, Next: print, Prev: info, Up: COMMANDS 4.10 man ======== Show any of the hledger manuals using man. The 'man' command displays any of the hledger reference manuals using man, the standard documentation viewer on unix systems. This will fit the text to your terminal width, and probably invoke a pager automatically. It requires the "man" program to be available in your PATH. As with help, run it with no arguments to list available topics (manuals).  File: hledger.1.info, Node: print, Next: register, Prev: man, Up: COMMANDS 4.11 print ========== Show transactions from the journal. '-x --explicit' show all amounts explicitly '-m STR --match=STR' show the transaction whose description is most similar to STR, and is most recent '-O FMT --output-format=FMT' select the output format. Supported formats: txt, csv. '-o FILE --output-file=FILE' write output to FILE. A file extension matching one of the above formats selects that format. $ hledger print 2008/01/01 income assets:bank:checking $1 income:salary $-1 2008/06/01 gift assets:bank:checking $1 income:gifts $-1 2008/06/02 save assets:bank:saving $1 assets:bank:checking $-1 2008/06/03 * eat & shop expenses:food $1 expenses:supplies $1 assets:cash $-2 2008/12/31 * pay off liabilities:debts $1 assets:bank:checking $-1 The print command displays full journal entries (transactions) from the journal file, tidily formatted. As of hledger 1.2, print's output is always a valid hledger journal. However it may not preserve all original content, eg it does not print directives or inter-transaction comments. Normally, transactions' implicit/explicit amount style is preserved: when an amount is omitted in the journal, it will be omitted in the output. You can use the '-x/--explicit' flag to make all amounts explicit, which can be useful for troubleshooting or for making your journal more readable and robust against data entry errors. Note, in this mode postings with a multi-commodity amount (possible with an implicit amount in a multi-commodity transaction) will be split into multiple single-commodity postings, for valid journal output. With -B/-cost, amounts with transaction prices are converted to cost (using the transaction price). The print command also supports output destination and CSV output. Here's an example of print's CSV output: $ hledger print -Ocsv "txnidx","date","date2","status","code","description","comment","account","amount","commodity","credit","debit","posting-status","posting-comment" "1","2008/01/01","","","","income","","assets:bank:checking","1","$","","1","","" "1","2008/01/01","","","","income","","income:salary","-1","$","1","","","" "2","2008/06/01","","","","gift","","assets:bank:checking","1","$","","1","","" "2","2008/06/01","","","","gift","","income:gifts","-1","$","1","","","" "3","2008/06/02","","","","save","","assets:bank:saving","1","$","","1","","" "3","2008/06/02","","","","save","","assets:bank:checking","-1","$","1","","","" "4","2008/06/03","","*","","eat & shop","","expenses:food","1","$","","1","","" "4","2008/06/03","","*","","eat & shop","","expenses:supplies","1","$","","1","","" "4","2008/06/03","","*","","eat & shop","","assets:cash","-2","$","2","","","" "5","2008/12/31","","*","","pay off","","liabilities:debts","1","$","","1","","" "5","2008/12/31","","*","","pay off","","assets:bank:checking","-1","$","1","","","" * There is one CSV record per posting, with the parent transaction's fields repeated. * The "txnidx" (transaction index) field shows which postings belong to the same transaction. (This number might change if transactions are reordered within the file, files are parsed/included in a different order, etc.) * The amount is separated into "commodity" (the symbol) and "amount" (numeric quantity) fields. * The numeric amount is repeated in either the "credit" or "debit" column, for convenience. (Those names are not accurate in the accounting sense; it just puts negative amounts under credit and zero or greater amounts under debit.)  File: hledger.1.info, Node: register, Next: stats, Prev: print, Up: COMMANDS 4.12 register ============= Show postings and their running total. Alias: reg. '--cumulative' show running total from report start date (default) '-H --historical' show historical running total/balance (includes postings before report start date) '-A --average' show running average of posting amounts instead of total (implies -empty) '-r --related' show postings' siblings instead '-w N --width=N' set output width (default: terminal width or COLUMNS. -wN,M sets description width as well) '-O FMT --output-format=FMT' select the output format. Supported formats: txt, csv. '-o FILE --output-file=FILE' write output to FILE. A file extension matching one of the above formats selects that format. The register command displays postings, one per line, and their running total. This is typically used with a query selecting a particular account, to see that account's activity: $ hledger register checking 2008/01/01 income assets:bank:checking $1 $1 2008/06/01 gift assets:bank:checking $1 $2 2008/06/02 save assets:bank:checking $-1 $1 2008/12/31 pay off assets:bank:checking $-1 0 The '--historical'/'-H' flag adds the balance from any undisplayed prior postings to the running total. This is useful when you want to see only recent activity, with a historically accurate running balance: $ hledger register checking -b 2008/6 --historical 2008/06/01 gift assets:bank:checking $1 $2 2008/06/02 save assets:bank:checking $-1 $1 2008/12/31 pay off assets:bank:checking $-1 0 The '--depth' option limits the amount of sub-account detail displayed. The '--average'/'-A' flag shows the running average posting amount instead of the running total (so, the final number displayed is the average for the whole report period). This flag implies '--empty' (see below). It is affected by '--historical'. It works best when showing just one account and one commodity. The '--related'/'-r' flag shows the _other_ postings in the transactions of the postings which would normally be shown. With a reporting interval, register shows summary postings, one per interval, aggregating the postings to each account: $ hledger register --monthly income 2008/01 income:salary $-1 $-1 2008/06 income:gifts $-1 $-2 Periods with no activity, and summary postings with a zero amount, are not shown by default; use the '--empty'/'-E' flag to see them: $ hledger register --monthly income -E 2008/01 income:salary $-1 $-1 2008/02 0 $-1 2008/03 0 $-1 2008/04 0 $-1 2008/05 0 $-1 2008/06 income:gifts $-1 $-2 2008/07 0 $-2 2008/08 0 $-2 2008/09 0 $-2 2008/10 0 $-2 2008/11 0 $-2 2008/12 0 $-2 Often, you'll want to see just one line per interval. The '--depth' option helps with this, causing subaccounts to be aggregated: $ hledger register --monthly assets --depth 1h 2008/01 assets $1 $1 2008/06 assets $-1 0 2008/12 assets $-1 $-1 Note when using report intervals, if you specify start/end dates these will be adjusted outward if necessary to contain a whole number of intervals. This ensures that the first and last intervals are full length and comparable to the others in the report. * Menu: * Custom register output::  File: hledger.1.info, Node: Custom register output, Up: register 4.12.1 Custom register output ----------------------------- register uses the full terminal width by default, except on windows. You can override this by setting the 'COLUMNS' environment variable (not a bash shell variable) or by using the '--width'/'-w' option. The description and account columns normally share the space equally (about half of (width - 40) each). You can adjust this by adding a description width as part of -width's argument, comma-separated: '--width W,D' . Here's a diagram: <--------------------------------- width (W) ----------------------------------> date (10) description (D) account (W-41-D) amount (12) balance (12) DDDDDDDDDD dddddddddddddddddddd aaaaaaaaaaaaaaaaaaa AAAAAAAAAAAA AAAAAAAAAAAA and some examples: $ hledger reg # use terminal width (or 80 on windows) $ hledger reg -w 100 # use width 100 $ COLUMNS=100 hledger reg # set with one-time environment variable $ export COLUMNS=100; hledger reg # set till session end (or window resize) $ hledger reg -w 100,40 # set overall width 100, description width 40 $ hledger reg -w $COLUMNS,40 # use terminal width, and set description width The register command also supports the '-o/--output-file' and '-O/--output-format' options for controlling output destination and CSV output.  File: hledger.1.info, Node: stats, Next: test, Prev: register, Up: COMMANDS 4.13 stats ========== Show some journal statistics. '-o FILE --output-file=FILE' write output to FILE. A file extension matching one of the above formats selects that format. $ hledger stats Main journal file : /src/hledger/examples/sample.journal Included journal files : Transactions span : 2008-01-01 to 2009-01-01 (366 days) Last transaction : 2008-12-31 (2333 days ago) Transactions : 5 (0.0 per day) Transactions last 30 days: 0 (0.0 per day) Transactions last 7 days : 0 (0.0 per day) Payees/descriptions : 5 Accounts : 8 (depth 3) Commodities : 1 ($) The stats command displays summary information for the whole journal, or a matched part of it. With a reporting interval, it shows a report for each report period. The stats command also supports '-o/--output-file' for controlling output destination.  File: hledger.1.info, Node: test, Prev: stats, Up: COMMANDS 4.14 test ========= Run built-in unit tests. $ hledger test Cases: 74 Tried: 74 Errors: 0 Failures: 0 This command runs hledger's built-in unit tests and displays a quick report. With a regular expression argument, it selects only tests with matching names. It's mainly used in development, but it's also nice to be able to check your hledger executable for smoke at any time.  File: hledger.1.info, Node: ADD-ON COMMANDS, Prev: COMMANDS, Up: Top 5 ADD-ON COMMANDS ***************** hledger also searches for external add-on commands, and will include these in the commands list. These are programs or scripts in your PATH whose name starts with 'hledger-' and ends with a recognised file extension (currently: no extension, 'bat','com','exe', 'hs','lhs','pl','py','rb','rkt','sh'). Add-ons can be invoked like any hledger command, but there are a few things to be aware of. Eg if the 'hledger-web' add-on is installed, * 'hledger -h web' shows hledger's help, while 'hledger web -h' shows hledger-web's help. * Flags specific to the add-on must have a preceding '--' to hide them from hledger. So 'hledger web --serve --port 9000' will be rejected; you must use 'hledger web -- --serve --port 9000'. * You can always run add-ons directly if preferred: 'hledger-web --serve --port 9000'. Add-ons are a relatively easy way to add local features or experiment with new ideas. They can be written in any language, but haskell scripts have a big advantage: they can use the same hledger (and haskell) library functions that built-in commands do, for command-line options, journal parsing, reporting, etc. Here are some hledger add-ons available: * Menu: * Official add-ons:: * Third party add-ons:: * Experimental add-ons::  File: hledger.1.info, Node: Official add-ons, Next: Third party add-ons, Up: ADD-ON COMMANDS 5.1 Official add-ons ==================== These are maintained and released along with hledger. * Menu: * api:: * ui:: * web::  File: hledger.1.info, Node: api, Next: ui, Up: Official add-ons 5.1.1 api --------- hledger-api serves hledger data as a JSON web API.  File: hledger.1.info, Node: ui, Next: web, Prev: api, Up: Official add-ons 5.1.2 ui -------- hledger-ui provides an efficient curses-style interface.  File: hledger.1.info, Node: web, Prev: ui, Up: Official add-ons 5.1.3 web --------- hledger-web provides a simple web interface.  File: hledger.1.info, Node: Third party add-ons, Next: Experimental add-ons, Prev: Official add-ons, Up: ADD-ON COMMANDS 5.2 Third party add-ons ======================= These are maintained separately, and usually updated shortly after a hledger release. * Menu: * diff:: * iadd:: * interest:: * irr::  File: hledger.1.info, Node: diff, Next: iadd, Up: Third party add-ons 5.2.1 diff ---------- hledger-diff shows differences in an account's transactions between one journal file and another.  File: hledger.1.info, Node: iadd, Next: interest, Prev: diff, Up: Third party add-ons 5.2.2 iadd ---------- hledger-iadd is a curses-style, more interactive replacement for the add command.  File: hledger.1.info, Node: interest, Next: irr, Prev: iadd, Up: Third party add-ons 5.2.3 interest -------------- hledger-interest generates interest transactions for an account according to various schemes.  File: hledger.1.info, Node: irr, Prev: interest, Up: Third party add-ons 5.2.4 irr --------- hledger-irr calculates the internal rate of return of an investment account.  File: hledger.1.info, Node: Experimental add-ons, Prev: Third party add-ons, Up: ADD-ON COMMANDS 5.3 Experimental add-ons ======================== These are available in source form in the hledger repo's bin/ directory; installing them is pretty easy. They may be less mature and documented than built-in commands. Reading and tweaking these is a good way to start making your own! * Menu: * autosync:: * budget:: * chart:: * check:: * check-dates:: * check-dupes:: * equity:: * prices:: * print-unique:: * register-match:: * rewrite::  File: hledger.1.info, Node: autosync, Next: budget, Up: Experimental add-ons 5.3.1 autosync -------------- hledger-autosync is a symbolic link for easily running ledger-autosync, if installed. ledger-autosync does deduplicating conversion of OFX data and some CSV formats, and can also download the data if your bank offers OFX Direct Connect.  File: hledger.1.info, Node: budget, Next: chart, Prev: autosync, Up: Experimental add-ons 5.3.2 budget ------------ hledger-budget.hs adds more budget-tracking features to hledger.  File: hledger.1.info, Node: chart, Next: check, Prev: budget, Up: Experimental add-ons 5.3.3 chart ----------- hledger-chart.hs is an old pie chart generator, in need of some love.  File: hledger.1.info, Node: check, Next: check-dates, Prev: chart, Up: Experimental add-ons 5.3.4 check ----------- hledger-check.hs checks more powerful account balance assertions.  File: hledger.1.info, Node: check-dates, Next: check-dupes, Prev: check, Up: Experimental add-ons 5.3.5 check-dates ----------------- hledger-check-dates.hs checks that journal entries are ordered by date.  File: hledger.1.info, Node: check-dupes, Next: equity, Prev: check-dates, Up: Experimental add-ons 5.3.6 check-dupes ----------------- hledger-check-dupes.hs checks for account names sharing the same leaf name.  File: hledger.1.info, Node: equity, Next: prices, Prev: check-dupes, Up: Experimental add-ons 5.3.7 equity ------------ hledger-equity.hs prints balance-resetting transactions, useful for bringing account balances across file boundaries.  File: hledger.1.info, Node: prices, Next: print-unique, Prev: equity, Up: Experimental add-ons 5.3.8 prices ------------ hledger-prices.hs prints all prices from the journal.  File: hledger.1.info, Node: print-unique, Next: register-match, Prev: prices, Up: Experimental add-ons 5.3.9 print-unique ------------------ hledger-print-unique.hs prints transactions which do not reuse an already-seen description.  File: hledger.1.info, Node: register-match, Next: rewrite, Prev: print-unique, Up: Experimental add-ons 5.3.10 register-match --------------------- hledger-register-match.hs helps ledger-autosync detect already-seen transactions when importing.  File: hledger.1.info, Node: rewrite, Prev: register-match, Up: Experimental add-ons 5.3.11 rewrite -------------- hledger-rewrite.hs Adds one or more custom postings to matched transactions.  Tag Table: Node: Top70 Node: EXAMPLES1886 Ref: #examples1988 Node: OPTIONS3634 Ref: #options3738 Node: General options3993 Ref: #general-options4120 Node: Command options6643 Ref: #command-options6796 Node: Command arguments7194 Ref: #command-arguments7354 Node: Special characters7475 Ref: #special-characters7633 Node: Input files8801 Ref: #input-files8939 Node: Smart dates10902 Ref: #smart-dates11045 Node: Report start & end date12024 Ref: #report-start-end-date12196 Node: Report intervals13262 Ref: #report-intervals13427 Node: Period expressions13828 Ref: #period-expressions13988 Node: Depth limiting16328 Ref: #depth-limiting16474 Node: Pivoting16675 Ref: #pivoting16810 Node: Regular expressions18581 Ref: #regular-expressions18715 Node: QUERIES20076 Ref: #queries20180 Node: COMMANDS23826 Ref: #commands23940 Node: accounts24613 Ref: #accounts24713 Node: activity25695 Ref: #activity25807 Node: add26166 Ref: #add26267 Node: balance28925 Ref: #balance29038 Node: Flat mode31980 Ref: #flat-mode32107 Node: Depth limited balance reports32527 Ref: #depth-limited-balance-reports32730 Node: Multicolumn balance reports33150 Ref: #multicolumn-balance-reports33352 Node: Market value38000 Ref: #market-value38164 Node: Custom balance output39464 Ref: #custom-balance-output39637 Node: Output destination41730 Ref: #output-destination41895 Node: CSV output42165 Ref: #csv-output42284 Node: balancesheet42681 Ref: #balancesheet42809 Node: cashflow44716 Ref: #cashflow44833 Node: help46701 Ref: #help46813 Node: incomestatement47651 Ref: #incomestatement47781 Node: info49673 Ref: #info49780 Node: man50144 Ref: #man50241 Node: print50646 Ref: #print50751 Node: register54507 Ref: #register54620 Node: Custom register output59116 Ref: #custom-register-output59247 Node: stats60544 Ref: #stats60650 Node: test61531 Ref: #test61618 Node: ADD-ON COMMANDS61986 Ref: #add-on-commands62098 Node: Official add-ons63385 Ref: #official-add-ons63527 Node: api63614 Ref: #api63705 Node: ui63757 Ref: #ui63858 Node: web63916 Ref: #web64007 Node: Third party add-ons64053 Ref: #third-party-add-ons64230 Node: diff64365 Ref: #diff64464 Node: iadd64563 Ref: #iadd64679 Node: interest64762 Ref: #interest64885 Node: irr64980 Ref: #irr65080 Node: Experimental add-ons65158 Ref: #experimental-add-ons65312 Node: autosync65705 Ref: #autosync65819 Node: budget66058 Ref: #budget66182 Node: chart66248 Ref: #chart66367 Node: check66438 Ref: #check66562 Node: check-dates66629 Ref: #check-dates66771 Node: check-dupes66844 Ref: #check-dupes66987 Node: equity67064 Ref: #equity67192 Node: prices67311 Ref: #prices67440 Node: print-unique67495 Ref: #print-unique67644 Node: register-match67737 Ref: #register-match67893 Node: rewrite67991 Ref: #rewrite68112  End Tag Table