Monadic Iteratees: incremental input parsers, processors and transformers

This module provides many basic iteratees from which more complicated
iteratees can be built. In general these iteratees parallel those in
`Data.List`

, with some additions.

- isFinished :: (Monad m, Nullable s) => Iteratee s m Bool
- stream2list :: (Monad m, Nullable s, ListLike s el) => Iteratee s m [el]
- stream2stream :: (Monad m, Nullable s, Monoid s) => Iteratee s m s
- break :: (Monad m, ListLike s el) => (el -> Bool) -> Iteratee s m s
- dropWhile :: (Monad m, ListLike s el) => (el -> Bool) -> Iteratee s m ()
- drop :: (Monad m, Nullable s, ListLike s el) => Int -> Iteratee s m ()
- head :: (Monad m, ListLike s el) => Iteratee s m el
- last :: (Monad m, ListLike s el, Nullable s) => Iteratee s m el
- heads :: (Monad m, Nullable s, ListLike s el, Eq el) => s -> Iteratee s m Int
- peek :: (Monad m, ListLike s el) => Iteratee s m (Maybe el)
- roll :: (Monad m, Functor m, Nullable s, ListLike s el, ListLike s' s) => Int -> Int -> Iteratee s m s'
- length :: (Monad m, Num a, ListLike s el) => Iteratee s m a
- chunkLength :: (Monad m, ListLike s el) => Iteratee s m (Maybe Int)
- takeFromChunk :: (Monad m, Nullable s, ListLike s el) => Int -> Iteratee s m s
- breakE :: (Monad m, ListLike s el, NullPoint s) => (el -> Bool) -> Enumeratee s s m a
- take :: (Monad m, Nullable s, ListLike s el) => Int -> Enumeratee s s m a
- takeUpTo :: (Monad m, Nullable s, ListLike s el) => Int -> Enumeratee s s m a
- mapStream :: (Monad m, ListLike (s el) el, ListLike (s el') el', NullPoint (s el), LooseMap s el el') => (el -> el') -> Enumeratee (s el) (s el') m a
- rigidMapStream :: (Monad m, ListLike s el, NullPoint s) => (el -> el) -> Enumeratee s s m a
- filter :: (Monad m, Nullable s, ListLike s el) => (el -> Bool) -> Enumeratee s s m a
- group :: (ListLike s el, Monad m, Nullable s) => Int -> Enumeratee s [s] m a
- groupBy :: (ListLike s el, Monad m, Nullable s) => (el -> el -> Bool) -> Enumeratee s [s] m a
- merge :: (ListLike s1 el1, ListLike s2 el2, Nullable s1, Nullable s2, Monad m, Functor m) => (el1 -> el2 -> b) -> Enumeratee s2 b (Iteratee s1 m) a
- mergeByChunks :: (Nullable c2, Nullable c1, NullPoint c2, NullPoint c1, ListLike c1 el1, ListLike c2 el2, Functor m, Monad m) => (c1 -> c2 -> c3) -> (c1 -> c3) -> (c2 -> c3) -> Enumeratee c2 c3 (Iteratee c1 m) a
- foldl :: (Monad m, ListLike s el, FoldableLL s el) => (a -> el -> a) -> a -> Iteratee s m a
- foldl' :: (Monad m, ListLike s el, FoldableLL s el) => (a -> el -> a) -> a -> Iteratee s m a
- foldl1 :: (Monad m, ListLike s el, FoldableLL s el) => (el -> el -> el) -> Iteratee s m el
- foldl1' :: (Monad m, ListLike s el, FoldableLL s el) => (el -> el -> el) -> Iteratee s m el
- sum :: (Monad m, ListLike s el, Num el) => Iteratee s m el
- product :: (Monad m, ListLike s el, Num el) => Iteratee s m el
- enumPureNChunk :: (Monad m, ListLike s el) => s -> Int -> Enumerator s m a
- enumPair :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m (a, b)
- enumWith :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m (a, b)
- zip :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m (a, b)
- zip3 :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m c -> Iteratee s m (a, b, c)
- zip4 :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m c -> Iteratee s m d -> Iteratee s m (a, b, c, d)
- zip5 :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m c -> Iteratee s m d -> Iteratee s m e -> Iteratee s m (a, b, c, d, e)
- sequence_ :: (Monad m, ListLike s el, Nullable s) => [Iteratee s m a] -> Iteratee s m ()
- mapM_ :: (Monad m, ListLike s el, Nullable s) => (el -> m b) -> Iteratee s m ()
- foldM :: (Monad m, ListLike s b, Nullable s) => (a -> b -> m a) -> a -> Iteratee s m a
- module Data.Iteratee.Iteratee

# Iteratees

## Iteratee Utilities

stream2list :: (Monad m, Nullable s, ListLike s el) => Iteratee s m [el]Source

Read a stream to the end and return all of its elements as a list. This iteratee returns all data from the stream *strictly*.

stream2stream :: (Monad m, Nullable s, Monoid s) => Iteratee s m sSource

Read a stream to the end and return all of its elements as a stream. This iteratee returns all data from the stream *strictly*.

## Basic Iteratees

break :: (Monad m, ListLike s el) => (el -> Bool) -> Iteratee s m sSource

Takes an element predicate and returns the (possibly empty) prefix of the stream. None of the characters in the string satisfy the character predicate. If the stream is not terminated, the first character of the remaining stream satisfies the predicate.

N.B. `breakE`

should be used in preference to `break`

.
`break`

will retain all data until the predicate is met, which may
result in a space leak.

The analogue of `List.break`

dropWhile :: (Monad m, ListLike s el) => (el -> Bool) -> Iteratee s m ()Source

Skip all elements while the predicate is true.

The analogue of `List.dropWhile`

drop :: (Monad m, Nullable s, ListLike s el) => Int -> Iteratee s m ()Source

Drop n elements of the stream, if there are that many.

The analogue of `List.drop`

head :: (Monad m, ListLike s el) => Iteratee s m elSource

Attempt to read the next element of the stream and return it Raise a (recoverable) error if the stream is terminated

The analogue of `List.head`

last :: (Monad m, ListLike s el, Nullable s) => Iteratee s m elSource

Attempt to read the last element of the stream and return it Raise a (recoverable) error if the stream is terminated

The analogue of `List.last`

heads :: (Monad m, Nullable s, ListLike s el, Eq el) => s -> Iteratee s m IntSource

Given a sequence of characters, attempt to match them against
the characters on the stream. Return the count of how many
characters matched. The matched characters are removed from the
stream.
For example, if the stream contains `abd`

, then (heads `abc`

)
will remove the characters `ab`

and return 2.

peek :: (Monad m, ListLike s el) => Iteratee s m (Maybe el)Source

Look ahead at the next element of the stream, without removing
it from the stream.
Return `Just c`

if successful, return `Nothing`

if the stream is
terminated by `EOF`

.

:: (Monad m, Functor m, Nullable s, ListLike s el, ListLike s' s) | |

=> Int | length of chunk (t) |

-> Int | amount to consume (d) |

-> Iteratee s m s' |

Return a chunk of `t`

elements length while consuming `d`

elements
from the stream. Useful for creating a 'rolling average' with
`convStream`

.

length :: (Monad m, Num a, ListLike s el) => Iteratee s m aSource

Return the total length of the remaining part of the stream.

This forces evaluation of the entire stream.

The analogue of `List.length`

chunkLength :: (Monad m, ListLike s el) => Iteratee s m (Maybe Int)Source

Get the length of the current chunk, or `Nothing`

if `EOF`

.

This function consumes no input.

takeFromChunk :: (Monad m, Nullable s, ListLike s el) => Int -> Iteratee s m sSource

Take `n`

elements from the current chunk, or the whole chunk if
`n`

is greater.

## Nested iteratee combinators

breakE :: (Monad m, ListLike s el, NullPoint s) => (el -> Bool) -> Enumeratee s s m aSource

Takes an element predicate and an iteratee, running the iteratee on all elements of the stream until the predicate is met.

the following rule relates `break`

to `breakE`

`break`

pred === `joinI`

(`breakE`

pred stream2stream)

`breakE`

should be used in preference to `break`

whenever possible.

:: (Monad m, Nullable s, ListLike s el) | |

=> Int | number of elements to consume |

-> Enumeratee s s m a |

Read n elements from a stream and apply the given iteratee to the stream of the read elements. Unless the stream is terminated early, we read exactly n elements, even if the iteratee has accepted fewer.

The analogue of `List.take`

takeUpTo :: (Monad m, Nullable s, ListLike s el) => Int -> Enumeratee s s m aSource

Read n elements from a stream and apply the given iteratee to the
stream of the read elements. If the given iteratee accepted fewer
elements, we stop.
This is the variation of `take`

with the early termination
of processing of the outer stream once the processing of the inner stream
finished early.

Iteratees composed with `takeUpTo`

will consume only enough elements to
reach a done state. Any remaining data will be available in the outer
stream.

> let iter = do h <- joinI $ takeUpTo 5 I.head t <- stream2list return (h,t) > enumPureNChunk [1..10::Int] 3 iter >>= run >>= print (1,[2,3,4,5,6,7,8,9,10]) > enumPureNChunk [1..10::Int] 7 iter >>= run >>= print (1,[2,3,4,5,6,7,8,9,10])

in each case, `I.head`

consumes only one element, returning the remaining
4 elements to the outer stream

mapStream :: (Monad m, ListLike (s el) el, ListLike (s el') el', NullPoint (s el), LooseMap s el el') => (el -> el') -> Enumeratee (s el) (s el') m aSource

Map the stream: another iteratee transformer
Given the stream of elements of the type `el`

and the function `(el->el')`

,
build a nested stream of elements of the type `el'`

and apply the
given iteratee to it.

The analog of `List.map`

rigidMapStream :: (Monad m, ListLike s el, NullPoint s) => (el -> el) -> Enumeratee s s m aSource

filter :: (Monad m, Nullable s, ListLike s el) => (el -> Bool) -> Enumeratee s s m aSource

Creates an `enumeratee`

with only elements from the stream that
satisfy the predicate function. The outer stream is completely consumed.

The analogue of `List.filter`

:: (ListLike s el, Monad m, Nullable s) | |

=> Int | size of group |

-> Enumeratee s [s] m a |

Creates an `Enumeratee`

in which elements from the stream are
grouped into `sz`

-sized blocks. The outer stream is completely
consumed and the final block may be smaller than sz.

groupBy :: (ListLike s el, Monad m, Nullable s) => (el -> el -> Bool) -> Enumeratee s [s] m aSource

Creates an `enumeratee`

in which elements are grouped into
contiguous blocks that are equal according to a predicate.

The analogue of `List.groupBy`

merge :: (ListLike s1 el1, ListLike s2 el2, Nullable s1, Nullable s2, Monad m, Functor m) => (el1 -> el2 -> b) -> Enumeratee s2 b (Iteratee s1 m) aSource

Merge offers another way to nest iteratees: as a monad stack. This allows for the possibility of interleaving data from multiple streams.

-- print each element from a stream of lines. logger :: (MonadIO m) => Iteratee [ByteString] m () logger = mapM_ (liftIO . putStrLn . B.unpack) -- combine alternating lines from two sources -- To see how this was derived, follow the types from -- 'ileaveStream logger' and work outwards. run =<< enumFile 10 "file1" (joinI $ enumLinesBS $ ( enumFile 10 "file2" . joinI . enumLinesBS $ joinI (ileaveLines logger)) >>= run) ileaveLines :: (Functor m, Monad m) => Enumeratee [ByteString] [ByteString] (Iteratee [ByteString] m) [ByteString] ileaveLines = merge (\l1 l2 -> [B.pack "f1:\n\t" ,l1 ,B.pack "f2:\n\t" ,l2 ]

:: (Nullable c2, Nullable c1, NullPoint c2, NullPoint c1, ListLike c1 el1, ListLike c2 el2, Functor m, Monad m) | |

=> (c1 -> c2 -> c3) | merge function |

-> (c1 -> c3) | |

-> (c2 -> c3) | |

-> Enumeratee c2 c3 (Iteratee c1 m) a |

A version of merge which operates on chunks instead of elements.

mergeByChunks offers more control than `merge`

. `merge`

terminates
when the first stream terminates, however mergeByChunks will continue
until both streams are exhausted.

`mergeByChunks`

guarantees that both chunks passed to the merge function
will have the same number of elements, although that number may vary
between calls.

## Folds

foldl :: (Monad m, ListLike s el, FoldableLL s el) => (a -> el -> a) -> a -> Iteratee s m aSource

Left-associative fold.

The analogue of `List.foldl`

foldl' :: (Monad m, ListLike s el, FoldableLL s el) => (a -> el -> a) -> a -> Iteratee s m aSource

Left-associative fold that is strict in the accumulator.
This function should be used in preference to `foldl`

whenever possible.

The analogue of `List.foldl'`

.

foldl1 :: (Monad m, ListLike s el, FoldableLL s el) => (el -> el -> el) -> Iteratee s m elSource

Variant of foldl with no base case. Requires at least one element in the stream.

The analogue of `List.foldl1`

.

foldl1' :: (Monad m, ListLike s el, FoldableLL s el) => (el -> el -> el) -> Iteratee s m elSource

Strict variant of `foldl1`

.

## Special Folds

# Enumerators

## Basic enumerators

enumPureNChunk :: (Monad m, ListLike s el) => s -> Int -> Enumerator s m aSource

The pure n-chunk enumerator
It passes a given stream of elements to the iteratee in `n`

-sized chunks.

## Enumerator Combinators

enumPair :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m (a, b)Source

Enumerate two iteratees over a single stream simultaneously.
Deprecated, use `zip`

instead.

Compare to `zip`

.

enumWith :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m (a, b)Source

Enumerate over two iteratees in parallel as long as the first iteratee is still consuming input. The second iteratee will be terminated with EOF when the first iteratee has completed. An example use is to determine how many elements an iteratee has consumed:

snd <$> enumWith (dropWhile (<5)) length

Compare to `zip`

zip :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m (a, b)Source

Enumerate two iteratees over a single stream simultaneously.

Compare to `List.zip`

.

zip3 :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m c -> Iteratee s m (a, b, c)Source

zip4 :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m c -> Iteratee s m d -> Iteratee s m (a, b, c, d)Source

zip5 :: (Monad m, Nullable s, ListLike s el) => Iteratee s m a -> Iteratee s m b -> Iteratee s m c -> Iteratee s m d -> Iteratee s m e -> Iteratee s m (a, b, c, d, e)Source

sequence_ :: (Monad m, ListLike s el, Nullable s) => [Iteratee s m a] -> Iteratee s m ()Source

Enumerate a list of iteratees over a single stream simultaneously and discard the results. This is a different behavior than Prelude's sequence_ which runs iteratees in the list one after the other.

Compare to `Prelude.sequence_`

.

## Monadic functions

mapM_ :: (Monad m, ListLike s el, Nullable s) => (el -> m b) -> Iteratee s m ()Source

Map a monadic function over the elements of the stream and ignore the result.

foldM :: (Monad m, ListLike s b, Nullable s) => (a -> b -> m a) -> a -> Iteratee s m aSource

The analogue of `Control.Monad.foldM`

# Re-exported modules

module Data.Iteratee.Iteratee