mongoDB-2.3.0.2: Driver (client) for MongoDB, a free, scalable, fast, document DBMS

Safe HaskellNone
LanguageHaskell2010

Database.MongoDB.Query

Contents

Description

Query and update documents

Synopsis

Monad

type Action = ReaderT MongoContext Source #

A monad on top of m (which must be a MonadIO) that may access the database and may fail with a DB Failure

access :: MonadIO m => Pipe -> AccessMode -> Database -> Action m a -> m a Source #

Run action against database on server at other end of pipe. Use access mode for any reads and writes. Throw Failure in case of any error.

data Failure Source #

A connection failure, or a read or write exception like cursor expired or inserting a duplicate key. Note, unexpected data from the server is not a Failure, rather it is a programming error (you should call error in this case) because the client and server are incompatible and requires a programming change.

Constructors

ConnectionFailure IOError

TCP connection (Pipeline) failed. May work if you try again on the same Mongo Connection which will create a new Pipe.

CursorNotFoundFailure CursorId

Cursor expired because it wasn't accessed for over 10 minutes, or this cursor came from a different server that the one you are currently connected to (perhaps a fail over happen between servers in a replica set)

QueryFailure ErrorCode String

Query failed for some reason as described in the string

WriteFailure Int ErrorCode String

Error observed by getLastError after a write, error description is in string, index of failed document is the first argument

WriteConcernFailure Int String

Write concern error. It's reported only by insert, update, delete commands. Not by wire protocol.

DocNotFound Selection

fetch found no document matching selection

AggregateFailure String

aggregate returned an error

CompoundFailure [Failure]

When we need to aggregate several failures and report them.

ProtocolFailure Int String

The structure of the returned documents doesn't match what we expected

Instances

Eq Failure Source # 

Methods

(==) :: Failure -> Failure -> Bool #

(/=) :: Failure -> Failure -> Bool #

Show Failure Source # 
Exception Failure Source # 
Error Failure Source #

fail is treated the same as a programming error. In other words, don't use it.

type ErrorCode = Int Source #

Error code from getLastError or query failure

data AccessMode Source #

Type of reads and writes to perform

Constructors

ReadStaleOk

Read-only action, reading stale data from a slave is OK.

UnconfirmedWrites

Read-write action, slave not OK, every write is fire & forget.

ConfirmWrites GetLastError

Read-write action, slave not OK, every write is confirmed with getLastError.

type GetLastError = Document Source #

Parameters for getLastError command. For example ["w" =: 2] tells the server to wait for the write to reach at least two servers in replica set before acknowledging. See http://www.mongodb.org/display/DOCS/Last+Error+Commands for more options.

accessMode :: Monad m => AccessMode -> Action m a -> Action m a Source #

Run action with given AccessMode

liftDB :: (MonadReader env m, HasMongoContext env, MonadIO m) => Action IO a -> m a Source #

data MongoContext Source #

Values needed when executing a db operation

Constructors

MongoContext

operations query/update this database

Fields

class HasMongoContext env where Source #

Minimal complete definition

mongoContext

Database

allDatabases :: MonadIO m => Action m [Database] Source #

List all databases residing on server

useDb :: Monad m => Database -> Action m a -> Action m a Source #

Run action against given database

thisDatabase :: Monad m => Action m Database Source #

Current database in use

Authentication

auth :: MonadIO m => Username -> Password -> Action m Bool Source #

Authenticate with the current database (if server is running in secure mode). Return whether authentication was successful or not. Reauthentication is required for every new pipe. SCRAM-SHA-1 will be used for server versions 3.0+, MONGO-CR for lower versions.

authMongoCR :: MonadIO m => Username -> Password -> Action m Bool Source #

Authenticate with the current database, using the MongoDB-CR authentication mechanism (default in MongoDB server < 3.0)

authSCRAMSHA1 :: MonadIO m => Username -> Password -> Action m Bool Source #

Authenticate with the current database, using the SCRAM-SHA-1 authentication mechanism (default in MongoDB server >= 3.0)

Collection

type Collection = Text Source #

Collection name (not prefixed with database)

allCollections :: MonadIO m => Action m [Collection] Source #

List all collections in this database

Selection

data Selection Source #

Selects documents in collection that match selector

Constructors

Select 

type Selector = Document Source #

Filter for a query, analogous to the where clause in SQL. [] matches all documents in collection. ["x" =: a, "y" =: b] is analogous to where x = a and y = b in SQL. See http://www.mongodb.org/display/DOCS/Querying for full selector syntax.

whereJS :: Selector -> Javascript -> Selector Source #

Add Javascript predicate to selector, in which case a document must match both selector and predicate

class Select aQueryOrSelection where Source #

Minimal complete definition

select

Methods

select :: Selector -> Collection -> aQueryOrSelection Source #

Query or Selection that selects documents in collection that match selector. The choice of type depends on use, for example, in find (select sel col) it is a Query, and in delete (select sel col) it is a Selection.

Write

Insert

insert :: MonadIO m => Collection -> Document -> Action m Value Source #

Insert document into collection and return its "_id" value, which is created automatically if not supplied

insert_ :: MonadIO m => Collection -> Document -> Action m () Source #

Same as insert except don't return _id

insertMany :: MonadIO m => Collection -> [Document] -> Action m [Value] Source #

Insert documents into collection and return their "_id" values, which are created automatically if not supplied. If a document fails to be inserted (eg. due to duplicate key) then remaining docs are aborted, and LastError is set. An exception will be throw if any error occurs.

insertMany_ :: MonadIO m => Collection -> [Document] -> Action m () Source #

Same as insertMany except don't return _ids

insertAll :: MonadIO m => Collection -> [Document] -> Action m [Value] Source #

Insert documents into collection and return their "_id" values, which are created automatically if not supplied. If a document fails to be inserted (eg. due to duplicate key) then remaining docs are still inserted.

insertAll_ :: MonadIO m => Collection -> [Document] -> Action m () Source #

Same as insertAll except don't return _ids

Update

save :: MonadIO m => Collection -> Document -> Action m () Source #

Save document to collection, meaning insert it if its new (has no "_id" field) or upsert it if its not new (has "_id" field)

replace :: MonadIO m => Selection -> Document -> Action m () Source #

Replace first document in selection with given document

repsert :: MonadIO m => Selection -> Document -> Action m () Source #

Deprecated: use upsert instead

Replace first document in selection with given document, or insert document if selection is empty

upsert :: MonadIO m => Selection -> Document -> Action m () Source #

Update first document in selection with given document, or insert document if selection is empty

modify :: MonadIO m => Selection -> Modifier -> Action m () Source #

Update all documents in selection using given modifier

updateMany :: MonadIO m => Collection -> [(Selector, Document, [UpdateOption])] -> Action m WriteResult Source #

Bulk update operation. If one update fails it will not update the remaining - documents. Current returned value is only a place holder. With mongodb server - before 2.6 it will send update requests one by one. In order to receive - error messages in versions under 2.6 you need to user confirmed writes. - Otherwise even if the errors had place the list of errors will be empty and - the result will be success. After 2.6 it will use bulk update feature in - mongodb.

updateAll :: MonadIO m => Collection -> [(Selector, Document, [UpdateOption])] -> Action m WriteResult Source #

Bulk update operation. If one update fails it will proceed with the - remaining documents. With mongodb server before 2.6 it will send update - requests one by one. In order to receive error messages in versions under - 2.6 you need to use confirmed writes. Otherwise even if the errors had - place the list of errors will be empty and the result will be success. - After 2.6 it will use bulk update feature in mongodb.

data WriteResult Source #

Constructors

WriteResult 

Fields

data UpdateOption Source #

Constructors

Upsert

If set, the database will insert the supplied object into the collection if no matching document is found

MultiUpdate

If set, the database will update all matching objects in the collection. Otherwise only updates first matching doc

Delete

delete :: MonadIO m => Selection -> Action m () Source #

Delete all documents in selection

deleteOne :: MonadIO m => Selection -> Action m () Source #

Delete first document in selection

deleteMany :: MonadIO m => Collection -> [(Selector, [DeleteOption])] -> Action m WriteResult Source #

Bulk delete operation. If one delete fails it will not delete the remaining - documents. Current returned value is only a place holder. With mongodb server - before 2.6 it will send delete requests one by one. After 2.6 it will use - bulk delete feature in mongodb.

deleteAll :: MonadIO m => Collection -> [(Selector, [DeleteOption])] -> Action m WriteResult Source #

Bulk delete operation. If one delete fails it will proceed with the - remaining documents. Current returned value is only a place holder. With - mongodb server before 2.6 it will send delete requests one by one. After 2.6 - it will use bulk delete feature in mongodb.

data DeleteOption Source #

Constructors

SingleRemove

If set, the database will remove only the first matching document in the collection. Otherwise all matching documents will be removed

Read

Query

data Query Source #

Use select to create a basic query with defaults, then modify if desired. For example, (select sel col) {limit = 10}

Constructors

Query 

Fields

  • options :: [QueryOption]

    Default = []

  • selection :: Selection
     
  • project :: Projector

    [] = all fields. Default = []

  • skip :: Word32

    Number of initial matching documents to skip. Default = 0

  • limit :: Limit

    Maximum number of documents to return, 0 = no limit. Default = 0

  • sort :: Order

    Sort results by this order, [] = no sort. Default = []

  • snapshot :: Bool

    If true assures no duplicates are returned, or objects missed, which were present at both the start and end of the query's execution (even if the object were updated). If an object is new during the query, or deleted during the query, it may or may not be returned, even with snapshot mode. Note that short query responses (less than 1MB) are always effectively snapshotted. Default = False

  • batchSize :: BatchSize

    The number of document to return in each batch response from the server. 0 means use Mongo default. Default = 0

  • hint :: Order

    Force MongoDB to use this index, [] = no hint. Default = []

Instances

data QueryOption Source #

Constructors

TailableCursor

Tailable means cursor is not closed when the last data is retrieved. Rather, the cursor marks the final object's position. You can resume using the cursor later, from where it was located, if more data were received. Like any "latent cursor", the cursor may become invalid at some point – for example if the final object it references were deleted. Thus, you should be prepared to requery on CursorNotFound exception.

NoCursorTimeout

The server normally times out idle cursors after 10 minutes to prevent a memory leak in case a client forgets to close a cursor. Set this option to allow a cursor to live forever until it is closed.

AwaitData

Use with TailableCursor. If we are at the end of the data, block for a while rather than returning no data. After a timeout period, we do return as normal. | Exhaust -- ^ Stream the data down full blast in multiple "more" packages, on the assumption that the client will fully read all data queried. Faster when you are pulling a lot of data and know you want to pull it all down. Note: the client is not allowed to not read all the data unless it closes the connection. Exhaust commented out because not compatible with current Pipeline implementation

Partial

Get partial results from a _mongos_ if some shards are down, instead of throwing an error.

type Projector = Document Source #

Fields to return, analogous to the select clause in SQL. [] means return whole document (analogous to * in SQL). ["x" =: 1, "y" =: 1] means return only x and y fields of each document. ["x" =: 0] means return all fields except x.

type Limit = Word32 Source #

Maximum number of documents to return, i.e. cursor will close after iterating over this number of documents. 0 means no limit.

type Order = Document Source #

Fields to sort by. Each one is associated with 1 or -1. Eg. ["x" =: 1, "y" =: -1] means sort by x ascending then y descending

type BatchSize = Word32 Source #

The number of document to return in each batch response from the server. 0 means use Mongo default.

explain :: MonadIO m => Query -> Action m Document Source #

Return performance stats of query execution

find :: MonadIO m => Query -> Action m Cursor Source #

Fetch documents satisfying query

findOne :: MonadIO m => Query -> Action m (Maybe Document) Source #

Fetch first document satisfying query or Nothing if none satisfy it

fetch :: MonadIO m => Query -> Action m Document Source #

Same as findOne except throw DocNotFound if none match

findAndModify Source #

Arguments

:: MonadIO m 
=> Query 
-> Document

updates

-> Action m (Either String Document) 

runs the findAndModify command as an update without an upsert and new set to true. Returns a single updated document (new option is set to true).

see findAndModifyOpts if you want to use findAndModify in a differnt way

findAndModifyOpts :: MonadIO m => Query -> FindAndModifyOpts -> Action m (Either String (Maybe Document)) Source #

runs the findAndModify command, allows more options than findAndModify

count :: MonadIO m => Query -> Action m Int Source #

Fetch number of documents satisfying query (including effect of skip and/or limit if present)

distinct :: MonadIO m => Label -> Selection -> Action m [Value] Source #

Fetch distinct values of field in selected documents

Cursor

data Cursor Source #

Iterator over results of a query. Use next to iterate or rest to get all results. A cursor is closed when it is explicitly closed, all results have been read from it, garbage collected, or not used for over 10 minutes (unless NoCursorTimeout option was specified in Query). Reading from a closed cursor raises a CursorNotFoundFailure. Note, a cursor is not closed when the pipe is closed, so you can open another pipe to the same server and continue using the cursor.

nextBatch :: MonadIO m => Cursor -> Action m [Document] Source #

Return next batch of documents in query result, which will be empty if finished.

next :: MonadIO m => Cursor -> Action m (Maybe Document) Source #

Return next document in query result, or Nothing if finished.

nextN :: MonadIO m => Int -> Cursor -> Action m [Document] Source #

Return next N documents or less if end is reached

rest :: MonadIO m => Cursor -> Action m [Document] Source #

Return remaining documents in query result

Aggregate

type Pipeline = [Document] Source #

The Aggregate Pipeline

aggregate :: MonadIO m => Collection -> Pipeline -> Action m [Document] Source #

Runs an aggregate and unpacks the result. See http://docs.mongodb.org/manual/core/aggregation/ for details.

Group

data Group Source #

Groups documents in collection by key then reduces (aggregates) each group

Constructors

Group 

Fields

  • gColl :: Collection
     
  • gKey :: GroupKey

    Fields to group by

  • gReduce :: Javascript

    (doc, agg) -> (). The reduce function reduces (aggregates) the objects iterated. Typical operations of a reduce function include summing and counting. It takes two arguments, the current document being iterated over and the aggregation value, and updates the aggregate value.

  • gInitial :: Document

    agg. Initial aggregation value supplied to reduce

  • gCond :: Selector

    Condition that must be true for a row to be considered. [] means always true.

  • gFinalize :: Maybe Javascript

    agg -> () | result. An optional function to be run on each item in the result set just before the item is returned. Can either modify the item (e.g., add an average field given a count and a total) or return a replacement object (returning a new object with just _id and average fields).

Instances

Eq Group Source # 

Methods

(==) :: Group -> Group -> Bool #

(/=) :: Group -> Group -> Bool #

Show Group Source # 

Methods

showsPrec :: Int -> Group -> ShowS #

show :: Group -> String #

showList :: [Group] -> ShowS #

data GroupKey Source #

Fields to group by, or function (doc -> key) returning a "key object" to be used as the grouping key. Use KeyF instead of Key to specify a key that is not an existing member of the object (or, to access embedded members).

Constructors

Key [Label] 
KeyF Javascript 

group :: MonadIO m => Group -> Action m [Document] Source #

Execute group query and return resulting aggregate value for each distinct key

MapReduce

data MapReduce Source #

Maps every document in collection to a list of (key, value) pairs, then for each unique key reduces all its associated values to a single result. There are additional parameters that may be set to tweak this basic operation. This implements the latest version of map-reduce that requires MongoDB 1.7.4 or greater. To map-reduce against an older server use runCommand directly as described in http://www.mongodb.org/display/DOCS/MapReduce.

Constructors

MapReduce 

Fields

type MapFun = Javascript Source #

() -> void. The map function references the variable this to inspect the current object under consideration. The function must call emit(key,value) at least once, but may be invoked any number of times, as may be appropriate.

type ReduceFun = Javascript Source #

(key, [value]) -> value. The reduce function receives a key and an array of values and returns an aggregate result value. The MapReduce engine may invoke reduce functions iteratively; thus, these functions must be idempotent. That is, the following must hold for your reduce function: reduce(k, [reduce(k,vs)]) == reduce(k,vs). If you need to perform an operation only once, use a finalize function. The output of emit (the 2nd param) and reduce should be the same format to make iterative reduce possible.

type FinalizeFun = Javascript Source #

(key, value) -> final_value. A finalize function may be run after reduction. Such a function is optional and is not necessary for many map/reduce cases. The finalize function takes a key and a value, and returns a finalized value.

data MROut Source #

Constructors

Inline

Return results directly instead of writing them to an output collection. Results must fit within 16MB limit of a single document

Output MRMerge Collection (Maybe Database)

Write results to given collection, in other database if specified. Follow merge policy when entry already exists

Instances

Eq MROut Source # 

Methods

(==) :: MROut -> MROut -> Bool #

(/=) :: MROut -> MROut -> Bool #

Show MROut Source # 

Methods

showsPrec :: Int -> MROut -> ShowS #

show :: MROut -> String #

showList :: [MROut] -> ShowS #

data MRMerge Source #

Constructors

Replace

Clear all old data and replace it with new data

Merge

Leave old data but overwrite entries with the same key with new data

Reduce

Leave old data but combine entries with the same key via MR's reduce function

type MRResult = Document Source #

Result of running a MapReduce has some stats besides the output. See http://www.mongodb.org/display/DOCS/MapReduce#MapReduce-Resultobject

mapReduce :: Collection -> MapFun -> ReduceFun -> MapReduce Source #

MapReduce on collection with given map and reduce functions. Remaining attributes are set to their defaults, which are stated in their comments.

runMR :: MonadIO m => MapReduce -> Action m Cursor Source #

Run MapReduce and return cursor of results. Error if map/reduce fails (because of bad Javascript)

runMR' :: MonadIO m => MapReduce -> Action m MRResult Source #

Run MapReduce and return a MR result document containing stats and the results if Inlined. Error if the map/reduce failed (because of bad Javascript).

Command

type Command = Document Source #

A command is a special query or action against the database. See http://www.mongodb.org/display/DOCS/Commands for details.

runCommand :: MonadIO m => Command -> Action m Document Source #

Run command against the database and return its result

runCommand1 :: MonadIO m => Text -> Action m Document Source #

runCommand1 foo = runCommand [foo =: 1]

eval :: (MonadIO m, Val v) => Javascript -> Action m v Source #

Run code on server