{-# LANGUAGE CPP #-}
-----------------------------------------------------------------------------
-- |
-- Module      :  Network
-- Copyright   :  (c) The University of Glasgow 2001
-- License     :  BSD-style (see the file libraries/network/LICENSE)
-- 
-- Maintainer  :  libraries@haskell.org
-- Stability   :  provisional
-- Portability :  portable
--
-- The "Network" interface is a \"higher-level\" interface to
-- networking facilities, and it is recommended unless you need the
-- lower-level interface in "Network.Socket".
--
-----------------------------------------------------------------------------

#include "HsNetworkConfig.h"

#ifdef HAVE_GETADDRINFO
-- Use IPv6-capable function definitions if the OS supports it.
#define IPV6_SOCKET_SUPPORT 1
#endif

module Network (

	-- * Basic data types
	Socket,
        PortID(..),
	HostName,
	PortNumber,	-- instance (Eq, Enum, Num, Real, Integral)

	-- * Initialisation
	withSocketsDo,  -- :: IO a   -> IO a
	
	-- * Server-side connections
	listenOn,	-- :: PortID -> IO Socket
	accept,		-- :: Socket -> IO (Handle, HostName, PortNumber)
        sClose,		-- :: Socket -> IO ()

	-- * Client-side connections
	connectTo,	-- :: HostName -> PortID -> IO Handle

	-- * Simple sending and receiving
	{-$sendrecv-}
	sendTo,		-- :: HostName -> PortID -> String -> IO ()
	recvFrom,	-- :: HostName -> PortID -> IO String

	-- * Miscellaneous
	socketPort,	-- :: Socket -> IO PortID

	-- * Networking Issues
	-- ** Buffering
	{-$buffering-}

	-- ** Improving I\/O Performance over sockets
	{-$performance-}

	-- ** @SIGPIPE@
	{-$sigpipe-}

       ) where

import Control.Monad (liftM)
import Data.Maybe (fromJust)
import Network.BSD
import Network.Socket hiding ( accept, socketPort, recvFrom, sendTo, PortNumber )
import qualified Network.Socket as Socket ( accept )
import System.IO
import Prelude
import qualified Control.Exception as Exception

-- ---------------------------------------------------------------------------
-- High Level ``Setup'' functions

-- If the @PortID@ specifies a unix family socket and the @Hostname@
-- differs from that returned by @getHostname@ then an error is
-- raised. Alternatively an empty string may be given to @connectTo@
-- signalling that the current hostname applies.

data PortID = 
	  Service String		-- Service Name eg "ftp"
	| PortNumber PortNumber		-- User defined Port Number
#if !defined(mingw32_HOST_OS) && !defined(cygwin32_HOST_OS) && !defined(_WIN32)
	| UnixSocket String		-- Unix family socket in file system
#endif

-- | Calling 'connectTo' creates a client side socket which is
-- connected to the given host and port.  The Protocol and socket type is
-- derived from the given port identifier.  If a port number is given
-- then the result is always an internet family 'Stream' socket. 

connectTo :: HostName		-- Hostname
	  -> PortID 		-- Port Identifier
	  -> IO Handle		-- Connected Socket

#if defined(IPV6_SOCKET_SUPPORT)
-- IPv6 and IPv4.

connectTo hostname (Service serv) = connect' hostname serv

connectTo hostname (PortNumber port) = connect' hostname (show port)
#else
-- IPv4 only.

connectTo hostname (Service serv) = do
    proto <- getProtocolNumber "tcp"
    bracketOnError
	(socket AF_INET Stream proto)
	(sClose)  -- only done if there's an error
	(\sock -> do
          port	<- getServicePortNumber serv
          he	<- getHostByName hostname
          connect sock (SockAddrInet port (hostAddress he))
          socketToHandle sock ReadWriteMode
 	)

connectTo hostname (PortNumber port) = do
    proto <- getProtocolNumber "tcp"
    bracketOnError
	(socket AF_INET Stream proto)
	(sClose)  -- only done if there's an error
        (\sock -> do
      	  he <- getHostByName hostname
      	  connect sock (SockAddrInet port (hostAddress he))
      	  socketToHandle sock ReadWriteMode
	)
#endif

#if !defined(mingw32_HOST_OS) && !defined(cygwin32_HOST_OS) && !defined(_WIN32)
connectTo _ (UnixSocket path) = do
    bracketOnError
	(socket AF_UNIX Stream 0)
	(sClose)
	(\sock -> do
          connect sock (SockAddrUnix path)
          socketToHandle sock ReadWriteMode
	)
#endif

#if defined(IPV6_SOCKET_SUPPORT)
connect' :: HostName -> ServiceName -> IO Handle

connect' host serv = do
    proto <- getProtocolNumber "tcp"
    let hints = defaultHints { addrFlags = [AI_ADDRCONFIG]
                             , addrProtocol = proto
                             , addrSocketType = Stream }
    addrs <- getAddrInfo (Just hints) (Just host) (Just serv)
    let addr = head addrs
    bracketOnError
	(socket (addrFamily addr) (addrSocketType addr) (addrProtocol addr))
	(sClose)  -- only done if there's an error
	(\sock -> do
          connect sock (addrAddress addr)
          socketToHandle sock ReadWriteMode
 	)
#endif

-- | Creates the server side socket which has been bound to the
-- specified port.  
--
-- NOTE: To avoid the \"Address already in use\"
-- problems popped up several times on the GHC-Users mailing list we
-- set the 'ReuseAddr' socket option on the listening socket.  If you
-- don't want this behaviour, please use the lower level
-- 'Network.Socket.listen' instead.

listenOn :: PortID 	-- ^ Port Identifier
	 -> IO Socket	-- ^ Connected Socket

#if defined(IPV6_SOCKET_SUPPORT)
-- IPv6 and IPv4.

listenOn (Service serv) = listen' serv

listenOn (PortNumber port) = listen' (show port)
#else
-- IPv4 only.

listenOn (Service serv) = do
    proto <- getProtocolNumber "tcp"
    bracketOnError
        (socket AF_INET Stream proto)
	(sClose)
	(\sock -> do
	    port    <- getServicePortNumber serv
	    setSocketOption sock ReuseAddr 1
	    bindSocket sock (SockAddrInet port iNADDR_ANY)
	    listen sock maxListenQueue
	    return sock
	)

listenOn (PortNumber port) = do
    proto <- getProtocolNumber "tcp"
    bracketOnError
    	(socket AF_INET Stream proto)
	(sClose)
	(\sock -> do
	    setSocketOption sock ReuseAddr 1
	    bindSocket sock (SockAddrInet port iNADDR_ANY)
	    listen sock maxListenQueue
	    return sock
	)
#endif

#if !defined(mingw32_HOST_OS) && !defined(cygwin32_HOST_OS) && !defined(_WIN32)
listenOn (UnixSocket path) =
    bracketOnError
    	(socket AF_UNIX Stream 0)
	(sClose)
	(\sock -> do
	    setSocketOption sock ReuseAddr 1
	    bindSocket sock (SockAddrUnix path)
	    listen sock maxListenQueue
	    return sock
	)
#endif

#if defined(IPV6_SOCKET_SUPPORT)
listen' :: ServiceName -> IO Socket

listen' serv = do
    proto <- getProtocolNumber "tcp"
    let hints = defaultHints { addrFlags = [AI_ADDRCONFIG, AI_PASSIVE]
                             , addrSocketType = Stream
                             , addrProtocol = proto }
    addrs <- getAddrInfo (Just hints) Nothing (Just serv)
    let addr = head addrs
    bracketOnError
        (socket (addrFamily addr) (addrSocketType addr) (addrProtocol addr))
	(sClose)
	(\sock -> do
	    setSocketOption sock ReuseAddr 1
	    bindSocket sock (addrAddress addr)
	    listen sock maxListenQueue
	    return sock
	)
#endif

-- -----------------------------------------------------------------------------
-- accept

-- | Accept a connection on a socket created by 'listenOn'.  Normal
-- I\/O operations (see "System.IO") can be used on the 'Handle'
-- returned to communicate with the client.
-- Notice that although you can pass any Socket to Network.accept,
-- only sockets of either AF_UNIX, AF_INET, or AF_INET6 will work
-- (this shouldn't be a problem, though). When using AF_UNIX, HostName
-- will be set to the path of the socket and PortNumber to -1.
--
accept :: Socket 		-- ^ Listening Socket
       -> IO (Handle,
	      HostName,
	      PortNumber)	-- ^ Triple of: read\/write 'Handle' for 
				-- communicating with the client,
			 	-- the 'HostName' of the peer socket, and
				-- the 'PortNumber' of the remote connection.
accept sock@(MkSocket _ AF_INET _ _ _) = do
 ~(sock', (SockAddrInet port haddr)) <- Socket.accept sock
 peer <- catchIO
	  (do 	
	     (HostEntry peer _ _ _) <- getHostByAddr AF_INET haddr
	     return peer
	  )
	  (\e -> inet_ntoa haddr)
		-- if getHostByName fails, we fall back to the IP address
 handle <- socketToHandle sock' ReadWriteMode
 return (handle, peer, port)
#if defined(IPV6_SOCKET_SUPPORT)
accept sock@(MkSocket _ AF_INET6 _ _ _) = do
 (sock', addr) <- Socket.accept sock
 peer <- catchIO ((fromJust . fst) `liftM` getNameInfo [] True False addr) $
         \_ -> case addr of
                 SockAddrInet  _   a   -> inet_ntoa a
                 SockAddrInet6 _ _ a _ -> return (show a)
# if !defined(mingw32_HOST_OS) && !defined(cygwin32_HOST_OS) && !defined(_WIN32)
                 SockAddrUnix      a   -> return a
# endif
                 a                     -> return (show a)
 handle <- socketToHandle sock' ReadWriteMode
 let port = case addr of
              SockAddrInet  p _     -> p
              SockAddrInet6 p _ _ _ -> p
              _                     -> -1
 return (handle, peer, port)
#endif
#if !defined(mingw32_HOST_OS) && !defined(cygwin32_HOST_OS) && !defined(_WIN32)
accept sock@(MkSocket _ AF_UNIX _ _ _) = do
 ~(sock', (SockAddrUnix path)) <- Socket.accept sock
 handle <- socketToHandle sock' ReadWriteMode
 return (handle, path, -1)
#endif
accept sock@(MkSocket _ family _ _ _) =
  error $ "Sorry, address family " ++ (show family) ++ " is not supported!"

-- -----------------------------------------------------------------------------
-- sendTo/recvFrom

{-$sendrecv
Send and receive data from\/to the given host and port number.  These
should normally only be used where the socket will not be required for
further calls. Also, note that due to the use of 'hGetContents' in 'recvFrom'
the socket will remain open (i.e. not available) even if the function already
returned. Their use is strongly discouraged except for small test-applications
or invocations from the command line.
-}

sendTo :: HostName 	-- Hostname
       -> PortID	-- Port Number
       -> String	-- Message to send
       -> IO ()
sendTo h p msg = do
  s <- connectTo h p
  hPutStr s msg
  hClose s

recvFrom :: HostName 	-- Hostname
	 -> PortID	-- Port Number
	 -> IO String	-- Received Data

#if defined(IPV6_SOCKET_SUPPORT)
recvFrom host port = do
    proto <- getProtocolNumber "tcp"
    let hints = defaultHints { addrFlags = [AI_ADDRCONFIG]
                             , addrProtocol = proto
                             , addrSocketType = Stream }
    allowed <- map addrAddress `liftM` getAddrInfo (Just hints) (Just host)
                                                   Nothing
    s <- listenOn port
    let waiting = do
        (s', addr) <- Socket.accept s
        if not (addr `oneOf` allowed)
         then sClose s' >> waiting
         else socketToHandle s' ReadMode >>= hGetContents
    waiting
  where
    a@(SockAddrInet _ ha) `oneOf` ((SockAddrInet _ hb):bs)
        | ha == hb = True
        | otherwise = a `oneOf` bs
    a@(SockAddrInet6 _ _ ha _) `oneOf` ((SockAddrInet6 _ _ hb _):bs)
        | ha == hb = True
        | otherwise = a `oneOf` bs
    _ `oneOf` _ = False
#else
recvFrom host port = do
 ip  <- getHostByName host
 let ipHs = hostAddresses ip
 s   <- listenOn port
 let 
  waiting = do
     ~(s', SockAddrInet _ haddr)  <-  Socket.accept s
     he <- getHostByAddr AF_INET haddr
     if not (any (`elem` ipHs) (hostAddresses he))
      then do
         sClose s'
         waiting
      else do
	h <- socketToHandle s' ReadMode
        msg <- hGetContents h
        return msg

 message <- waiting
 return message
#endif

-- ---------------------------------------------------------------------------
-- Access function returning the port type/id of socket.

-- | Returns the 'PortID' associated with a given socket.
socketPort :: Socket -> IO PortID
socketPort s = do
    sockaddr <- getSocketName s
    return (portID sockaddr)
  where
   portID sa =
    case sa of
     SockAddrInet port _      -> PortNumber port
#if defined(IPV6_SOCKET_SUPPORT)
     SockAddrInet6 port _ _ _ -> PortNumber port
#endif
#if !defined(mingw32_HOST_OS) && !defined(cygwin32_HOST_OS) && !defined(_WIN32)
     SockAddrUnix path	      -> UnixSocket path
#endif

-- ---------------------------------------------------------------------------
-- Utils

#if __GLASGOW_HASKELL__ && __GLASGOW_HASKELL__ < 606
-- Like bracket, but only performs the final action if there was an 
-- exception raised by the middle bit.
bracketOnError
        :: IO a         -- ^ computation to run first (\"acquire resource\")
        -> (a -> IO b)  -- ^ computation to run last (\"release resource\")
        -> (a -> IO c)  -- ^ computation to run in-between
        -> IO c         -- returns the value from the in-between computation
bracketOnError before after thing =
  Exception.block (do
    a <- before
    r <- Exception.catch
           (Exception.unblock (thing a))
           (\e -> do { after a; Exception.throw e })
    return r
 )
#else
bracketOnError = Exception.bracketOnError
#endif

-----------------------------------------------------------------------------
-- Extra documentation

{-$buffering

The 'Handle' returned by 'connectTo' and 'accept' is block-buffered by
default.  For an interactive application you may want to set the
buffering mode on the 'Handle' to
'LineBuffering' or 'NoBuffering', like so:

> h <- connectTo host port
> hSetBuffering h LineBuffering
-}

{-$performance

For really fast I\/O, it might be worth looking at the 'hGetBuf' and
'hPutBuf' family of functions in "System.IO".
-}

{-$sigpipe

On Unix, when writing to a socket and the reading end is
closed by the remote client, the program is normally sent a
@SIGPIPE@ signal by the operating system.  The
default behaviour when a @SIGPIPE@ is received is
to terminate the program silently, which can be somewhat confusing
if you haven't encountered this before.  The solution is to
specify that @SIGPIPE@ is to be ignored, using
the POSIX library:

>  import Posix
>  main = do installHandler sigPIPE Ignore Nothing; ...
-}

catchIO :: IO a -> (Exception.IOException -> IO a) -> IO a
#ifdef BASE4
catchIO = Exception.catch
#else
catchIO = Exception.catchJust Exception.ioErrors
#endif