{-# LANGUAGE CPP #-}

-- | This module exports functions that abstract simple TCP 'NS.Socket'
-- usage patterns.
--
-- This module uses 'MonadIO' and 'C.MonadMask' extensively so that you can
-- reuse these functions in monads other than 'IO'. However, if you don't care
-- about any of that, just pretend you are using the 'IO' monad all the time
-- and everything will work as expected.

-- Some code in this file was adapted from the @pipes-network@ library by
-- Renzo Carbonara. Copyright (c) 2012-2013. See its licensing terms (BSD3) at:
--   https://github.com/k0001/pipes-network/blob/master/LICENSE
--
-- Some code in this file was adapted from the @network-conduit@ library by
-- Michael Snoyman. Copyright (c) 2011. See its licensing terms (BSD3) at:
--   https://github.com/snoyberg/conduit/blob/master/network-conduit/LICENSE

module Network.Simple.TCP (
  -- * Introduction to TCP networking
  -- $tcp-101

  -- * Client side
  -- $client-side
    connect

  -- * Server side
  -- $server-side
  , serve
  -- ** Listening
  , listen
  -- ** Accepting
  , accept
  , acceptFork

  -- * Utils
  , recv
  , send

  -- * Low level support
  , bindSock
  , connectSock
  , closeSock

  -- * Note to Windows users
  , NS.withSocketsDo

  -- * Types
  , HostPreference(..)
  -- ** Re-exported from @Network.Socket@
  , NS.HostName
  , NS.ServiceName
  , NS.Socket
  , NS.SockAddr
  ) where

import           Control.Concurrent             (ThreadId, forkIO)
import qualified Control.Exception              as E
import qualified Control.Monad.Catch            as C
import           Control.Monad
import           Control.Monad.IO.Class         (MonadIO(liftIO))
import qualified Data.ByteString                as BS
import           Data.List                      (partition)
import qualified Network.Socket                 as NS
import           Network.Simple.Internal
import qualified Network.Socket.ByteString      as NSB

--------------------------------------------------------------------------------
-- $tcp-101
--
-- This introduction aims to give you a overly simplified overview of some
-- concepts you need to know about TCP sockets in order to make effective use of
-- this module.
--
-- There are two ends in a single TCP connection: one is the TCP «server» and
-- the other is the TCP «client». Each end is uniquely identified by an IP
-- address and a TCP port pair, and each end knows the IP address and TCP port
-- of the other end. Each end can send and receive data to and from the other
-- end.
--
-- A TCP server, once «bound» to a well-known IP address and TCP port, starts
-- «listening» for incoming connections from TCP clients to such bound IP
-- address and TCP port. When a TCP client attempts to connect to the TCP
-- server, the TCP server must «accept» the incoming connection in order to
-- start exchanging data with the remote end. A single TCP server can
-- sequentially accept many incoming connections, possibly handling each one
-- concurrently.
--
-- A TCP client can «connect» to a well-known IP address and TCP port previously
-- bound by a listening TCP server willing to accept new incoming connections.
-- Once the connection is established, the TCP client can immediately start
-- exchanging data with the TCP server. The TCP client is randomly assigned a
-- TCP port when connecting, and its IP address is selected by the operating
-- system so that it is reachable from the remote end.
--
-- The TCP client a and the TCP server can be running in the same host or in
-- different hosts.

--------------------------------------------------------------------------------

-- $client-side
--
-- Here's how you could run a TCP client:
--
-- @
-- 'connect' \"www.example.org\" \"80\" $ \\(connectionSocket, remoteAddr) -> do
--   putStrLn $ \"Connection established to \" ++ show remoteAddr
--   -- Now you may use connectionSocket as you please within this scope,
--   -- possibly using 'recv' and 'send' to interact with the remote end.
-- @

-- | Connect to a TCP server and use the connection.
--
-- The connection socket is closed when done or in case of exceptions.
--
-- If you prefer to acquire and close the socket yourself, then use
-- 'connectSock' and 'closeSock'.
connect
  :: (MonadIO m, C.MonadMask m)
  => NS.HostName      -- ^Server hostname.
  -> NS.ServiceName   -- ^Server service port.
  -> ((NS.Socket, NS.SockAddr) -> m r)
                      -- ^Computation taking the communication socket
                      -- and the server address.
  -> m r
connect host port = C.bracket (connectSock host port)
                              (silentCloseSock . fst)

--------------------------------------------------------------------------------

-- $server-side
--
-- Here's how you can run a TCP server that handles in different threads each
-- incoming connection to port @8000@ at IPv4 address @127.0.0.1@:
--
-- @
-- 'serve' ('Host' \"127.0.0.1\") \"8000\" $ \\(connectionSocket, remoteAddr) -> do
--   putStrLn $ \"TCP connection established from \" ++ show remoteAddr
--   -- Now you may use connectionSocket as you please within this scope,
--   -- possibly using 'recv' and 'send' to interact with the remote end.
-- @
--
-- If you need more control on the way your server runs, then you can use more
-- advanced functions such as 'listen', 'accept' and 'acceptFork'.

--------------------------------------------------------------------------------

-- | Start a TCP server that accepts incoming connections and handles them
-- concurrently in different threads.
--
-- Any acquired network resources are properly closed and discarded when done or
-- in case of exceptions.
--
-- Note: This function performs 'listen' and 'acceptFork', so you don't need to
-- perform those manually.
serve
  :: MonadIO m
  => HostPreference   -- ^Preferred host to bind.
  -> NS.ServiceName   -- ^Service port to bind.
  -> ((NS.Socket, NS.SockAddr) -> IO ())
                      -- ^Computation to run in a different thread
                      -- once an incoming connection is accepted. Takes the
                      -- connection socket and remote end address.
  -> m ()
serve hp port k = liftIO $ do
    listen hp port $ \(lsock,_) -> do
      forever $ acceptFork lsock k

--------------------------------------------------------------------------------

-- | Bind a TCP listening socket and use it.
--
-- The listening socket is closed when done or in case of exceptions.
--
-- If you prefer to acquire and close the socket yourself, then use 'bindSock',
-- 'closeSock' and the 'NS.listen' function from "Network.Socket" instead.
--
-- Note: 'N.maxListenQueue' is tipically 128, which is too small for high
-- performance servers. So, we use the maximum between 'N.maxListenQueue' and
-- 2048 as the default size of the listening queue. The 'NS.NoDelay' and
-- 'NS.ReuseAddr' options are set on the socket.
listen
  :: (MonadIO m, C.MonadMask m)
  => HostPreference   -- ^Preferred host to bind.
  -> NS.ServiceName   -- ^Service port to bind.
  -> ((NS.Socket, NS.SockAddr) -> m r)
                      -- ^Computation taking the listening socket and
                      -- the address it's bound to.
  -> m r
listen hp port = C.bracket listen' (silentCloseSock . fst)
  where
    listen' = do x@(bsock,_) <- bindSock hp port
                 liftIO . NS.listen bsock $ max 2048 NS.maxListenQueue
                 return x

--------------------------------------------------------------------------------

-- | Accept a single incoming connection and use it.
--
-- The connection socket is closed when done or in case of exceptions.
accept
  :: (MonadIO m, C.MonadMask m)
  => NS.Socket        -- ^Listening and bound socket.
  -> ((NS.Socket, NS.SockAddr) -> m r)
                      -- ^Computation to run once an incoming
                      -- connection is accepted. Takes the connection socket
                      -- and remote end address.
  -> m r
accept lsock k = do
    conn@(csock,_) <- liftIO (NS.accept lsock)
    C.finally (k conn) (silentCloseSock csock)
{-# INLINABLE accept #-}

-- | Accept a single incoming connection and use it in a different thread.
--
-- The connection socket is closed when done or in case of exceptions.
acceptFork
  :: MonadIO m
  => NS.Socket        -- ^Listening and bound socket.
  -> ((NS.Socket, NS.SockAddr) -> IO ())
                      -- ^Computation to run in a different thread
                      -- once an incoming connection is accepted. Takes the
                      -- connection socket and remote end address.
  -> m ThreadId
acceptFork lsock k = liftIO $ do
    conn@(csock,_) <- NS.accept lsock
    forkFinally (k conn)
                (\ea -> do silentCloseSock csock
                           either E.throwIO return ea)
{-# INLINABLE acceptFork #-}

--------------------------------------------------------------------------------

-- | Obtain a 'NS.Socket' connected to the given host and TCP service port.
--
-- The obtained 'NS.Socket' should be closed manually using 'closeSock' when
-- it's not needed anymore, otherwise you risk having the socket open for much
-- longer than needed.
--
-- Prefer to use 'connect' if you will be using the socket within a limited
-- scope and would like it to be closed immediately after its usage or in case
-- of exceptions.
connectSock :: MonadIO m
            => NS.HostName -> NS.ServiceName -> m (NS.Socket, NS.SockAddr)
connectSock host port = liftIO $ do
    (addr:_) <- NS.getAddrInfo (Just hints) (Just host) (Just port)
    E.bracketOnError (newSocket addr) closeSock $ \sock -> do
       let sockAddr = NS.addrAddress addr
       NS.connect sock sockAddr
       return (sock, sockAddr)
  where
    hints = NS.defaultHints { NS.addrFlags = [NS.AI_ADDRCONFIG]
                            , NS.addrSocketType = NS.Stream }

-- | Obtain a 'NS.Socket' bound to the given host name and TCP service port.
--
-- The obtained 'NS.Socket' should be closed manually using 'closeSock' when
-- it's not needed anymore.
--
-- Prefer to use 'listen' if you will be listening on this socket and using it
-- within a limited scope, and would like it to be closed immediately after its
-- usage or in case of exceptions.
bindSock :: MonadIO m
         => HostPreference -> NS.ServiceName -> m (NS.Socket, NS.SockAddr)
bindSock hp port = liftIO $ do
    addrs <- NS.getAddrInfo (Just hints) (hpHostName hp) (Just port)
    let addrs' = case hp of
          HostIPv4 -> prioritize isIPv4addr addrs
          HostIPv6 -> prioritize isIPv6addr addrs
          _        -> addrs
    tryAddrs addrs'
  where
    hints = NS.defaultHints { NS.addrFlags = [NS.AI_PASSIVE]
                            , NS.addrSocketType = NS.Stream }

    tryAddrs []     = error "bindSock: no addresses available"
    tryAddrs [x]    = useAddr x
    tryAddrs (x:xs) = E.catch (useAddr x)
                              (\e -> let _ = e :: IOError in tryAddrs xs)

    useAddr addr = E.bracketOnError (newSocket addr) closeSock $ \sock -> do
      let sockAddr = NS.addrAddress addr
      NS.setSocketOption sock NS.NoDelay 1
      NS.setSocketOption sock NS.ReuseAddr 1
      NS.bindSocket sock sockAddr
      return (sock, sockAddr)


-- | Close the 'NS.Socket'.
closeSock :: MonadIO m => NS.Socket -> m ()
closeSock = liftIO .
#if MIN_VERSION_network(2,4,0)
    NS.close
#else
    NS.sClose
#endif
{-# INLINE closeSock #-}

--------------------------------------------------------------------------------
-- Utils

-- | Read up to a limited number of bytes from a socket.
--
-- Returns `Nothing` if the remote end closed the connection or end-of-input was
-- reached. The number of returned bytes might be less than the specified limit.
recv :: MonadIO m => NS.Socket -> Int -> m (Maybe BS.ByteString)
recv sock nbytes = do
     bs <- liftIO (NSB.recv sock nbytes)
     if BS.null bs
        then return Nothing
        else return (Just bs)
{-# INLINABLE recv #-}

-- | Writes the given bytes to the socket.
send :: MonadIO m => NS.Socket -> BS.ByteString -> m ()
send sock = \bs -> liftIO (NSB.sendAll sock bs)
{-# INLINABLE send #-}

--------------------------------------------------------------------------------

-- Misc

newSocket :: NS.AddrInfo -> IO NS.Socket
newSocket addr = NS.socket (NS.addrFamily addr)
                           (NS.addrSocketType addr)
                           (NS.addrProtocol addr)

isIPv4addr, isIPv6addr :: NS.AddrInfo -> Bool
isIPv4addr x = NS.addrFamily x == NS.AF_INET
isIPv6addr x = NS.addrFamily x == NS.AF_INET6

-- | Move the elements that match the predicate closer to the head of the list.
-- Sorting is stable.
prioritize :: (a -> Bool) -> [a] -> [a]
prioritize p = uncurry (++) . partition p


--------------------------------------------------------------------------------

-- | 'Control.Concurrent.forkFinally' was introduced in base==4.6.0.0. We'll use
-- our own version here for a while, until base==4.6.0.0 is widely establised.
forkFinally :: IO a -> (Either E.SomeException a -> IO ()) -> IO ThreadId
forkFinally action and_then =
    E.mask $ \restore ->
        forkIO $ E.try (restore action) >>= and_then


-- | Like 'closeSock', except it swallows all 'IOError' exceptions.
silentCloseSock :: MonadIO m => NS.Socket -> m ()
silentCloseSock sock = liftIO $ do
    E.catch (closeSock sock)
            (\e -> let _ = e :: IOError in return ())