numeric-prelude-0.4.3.2: An experimental alternative hierarchy of numeric type classes

Safe HaskellNone
LanguageHaskell98

Number.Positional

Contents

Description

Exact Real Arithmetic - Computable reals. Inspired by ''The most unreliable technique for computing pi.'' See also http://www.haskell.org/haskellwiki/Exact_real_arithmetic .

Synopsis

types

type Digit = Int Source #

type Basis = Int Source #

basic helpers

nonNegative :: Basis -> T -> T Source #

Converts all digits to non-negative digits, that is the usual positional representation. However the conversion will fail when the remaining digits are all zero. (This cannot be improved!)

nonNegativeMant :: Basis -> Mantissa -> Mantissa Source #

Requires, that no digit is (basis-1) or (1-basis). The leading digit might be negative and might be -basis or basis.

compress :: Basis -> T -> T Source #

May prepend a digit.

compressFirst :: Basis -> T -> T Source #

Compress first digit. May prepend a digit.

compressMant :: Basis -> Mantissa -> Mantissa Source #

Does not prepend a digit.

compressSecondMant :: Basis -> Mantissa -> Mantissa Source #

Compress second digit. Sometimes this is enough to keep the digits in the admissible range. Does not prepend a digit.

trim :: T -> T Source #

Eliminate leading zero digits. This will fail for zero.

trimUntil :: Exponent -> T -> T Source #

Trim until a minimum exponent is reached. Safe for zeros.

decreaseExp :: Basis -> T -> T Source #

Accept a high leading digit for the sake of a reduced exponent. This eliminates one leading digit. Like pumpFirst but with exponent management.

pumpFirst :: Basis -> Mantissa -> Mantissa Source #

Merge leading and second digit. This is somehow an inverse of compressMant.

negativeExp :: Basis -> T -> T Source #

Make sure that a number with absolute value less than 1 has a (small) negative exponent. Also works with zero because it chooses an heuristic exponent for stopping.

conversions

integer

rational

fixed point

toFixedPoint :: Basis -> T -> FixedPoint Source #

Split into integer and fractional part.

floating point

fromDoubleApprox :: Basis -> Double -> T Source #

Only return as much digits as are contained in Double. This will speedup further computations.

text

showDec :: Exponent -> T -> String Source #

Show a number with respect to basis 10^e.

basis

powerBasis :: Basis -> Exponent -> T -> T Source #

Convert from a b basis representation to a b^e basis.

Works well with every exponent.

rootBasis :: Basis -> Exponent -> T -> T Source #

Convert from a b^e basis representation to a b basis.

Works well with every exponent.

fromBasis :: Basis -> Basis -> T -> T Source #

Convert between arbitrary bases. This conversion is expensive (quadratic time).

comparison

cmp :: Basis -> T -> T -> Ordering Source #

The basis must be at least ***. Note: Equality cannot be asserted in finite time on infinite precise numbers. If you want to assert, that a number is below a certain threshold, you should not call this routine directly, because it will fail on equality. Better round the numbers before comparison.

ifLazy :: Basis -> Bool -> T -> T -> T Source #

If all values are completely defined, then it holds

if b then x else y == ifLazy b x y

However if b is undefined, then it is at least known that the result is between x and y.

mean2 :: Basis -> (Digit, Digit) -> (Digit, Digit) -> Digit Source #

mean2 b (x0,x1) (y0,y1)

computes round ((x0.x1 + y0.y1)/2) , where x0.x1 and y0.y1 are positional rational numbers with respect to basis b

align :: Basis -> Exponent -> T -> T Source #

alignMant :: Basis -> Exponent -> T -> Mantissa Source #

Get the mantissa in such a form that it fits an expected exponent.

x and (e, alignMant b e x) represent the same number.

arithmetic

liftLaurent2 :: (T Digit -> T Digit -> T Digit) -> T -> T -> T Source #

liftLaurentMany :: ([T Digit] -> T Digit) -> [T] -> T Source #

add :: Basis -> T -> T -> T Source #

Add two numbers but do not eliminate leading zeros.

sub :: Basis -> T -> T -> T Source #

neg :: Basis -> T -> T Source #

addSome :: Basis -> [T] -> T Source #

Add at most basis summands. More summands will violate the allowed digit range.

addMany :: Basis -> [T] -> T Source #

Add many numbers efficiently by computing sums of sub lists with only little carry propagation.

type Series = [(Exponent, T)] Source #

series :: Basis -> Series -> T Source #

Add an infinite number of numbers. You must provide a list of estimate of the current remainders. The estimates must be given as exponents of the remainder. If such an exponent is too small, the summation will be aborted. If exponents are too big, computation will become inefficient.

splitAtPadZero :: Int -> Mantissa -> (Mantissa, Mantissa) Source #

Like splitAt, but it pads with zeros if the list is too short. This way it preserves length (fst (splitAtPadZero n xs)) == n

truncSeriesSummands :: Series -> Series Source #

help showing series summands

scale :: Basis -> Digit -> T -> T Source #

mul :: Basis -> T -> T -> T Source #

For obtaining n result digits it is mathematically sufficient to know the first (n+1) digits of the operands. However this implementation needs (n+2) digits, because of calls to compress in both scale and series. We should fix that.

divide :: Basis -> T -> T -> T Source #

Undefined if the divisor is zero - of course. Because it is impossible to assert that a real is zero, the routine will not throw an error in general.

ToDo: Rigorously derive the minimal required magnitude of the leading divisor digit.

divIntMant :: Basis -> Digit -> Mantissa -> Mantissa Source #

Fast division for small integral divisors, which occur for instance in summands of power series.

divInt :: Basis -> Digit -> T -> T Source #

algebraic functions

sqrt :: Basis -> T -> T Source #

sqrtFP :: Basis -> FixedPoint -> Mantissa Source #

Square root.

We need a leading digit of type Integer, because we have to collect up to 4 digits. This presentation can also be considered as FixedPoint.

ToDo: Rigorously derive the minimal required magnitude of the leading digit of the root.

Mathematically the nth digit of the square root depends roughly only on the first n digits of the input. This is because sqrt (1+eps) equalApprox 1 + eps/2. However this implementation requires 2*n input digits for emitting n digits. This is due to the repeated use of compressMant. It would suffice to fully compress only every basisth iteration (digit) and compress only the second leading digit in each iteration.

Can the involved operations be made lazy enough to solve y = (x+frac)^2 by frac = (y-x^2-frac^2) / (2*x) ?

sqrtFPNewton :: Basis -> FixedPoint -> Mantissa Source #

Newton iteration doubles the number of correct digits in every step. Thus we process the data in chunks of sizes of powers of two. This way we get fastest computation possible with Newton but also more dependencies on input than necessary. The question arises whether this implementation still fits the needs of computational reals. The input is requested as larger and larger chunks, and the input itself might be computed this way, e.g. a repeated square root. Requesting one digit too much, requires the double amount of work for the input computation, which in turn multiplies time consumption by a factor of four, and so on.

Optimal fast implementation of one routine does not preserve fast computation of composed computations.

The routine assumes, that the integer parts is at least b^2.

lazyInits :: [a] -> [[a]] Source #

List.inits is defined by inits = foldr (x ys -> [] : map (x:) ys) [[]]

This is too strict for our application.

Prelude> List.inits (0:1:2:undefined)
[[],[0],[0,1]*** Exception: Prelude.undefined

The following routine is more lazy than inits and even lazier than inits from utility-ht package, but it is restricted to infinite lists. This degree of laziness is needed for sqrtFP.

Prelude> lazyInits (0:1:2:undefined)
[[],[0],[0,1],[0,1,2],[0,1,2,*** Exception: Prelude.undefined

transcendent functions

exponential functions

expSmall :: Basis -> T -> T Source #

Absolute value of argument should be below 1.

exp :: Basis -> T -> T Source #

intPower :: Basis -> Integer -> T -> T -> T -> T Source #

cardPower :: Basis -> Integer -> T -> T -> T Source #

powerSeries :: Basis -> Rational -> T -> Series Source #

Residue estimates will only hold for exponents with absolute value below one.

The computation is based on Int, thus the denominator should not be too big. (Say, at most 1000 for 1000000 digits.)

It is not optimal to split the power into pure root and pure power (that means, with integer exponents). The root series can nicely handle all exponents, but for exponents above 1 the series summands rises at the beginning and thus make the residue estimate complicated. For powers with integer exponents the root series turns into the binomial formula, which is just a complicated way to compute a power which can also be determined by simple multiplication.

power :: Basis -> Rational -> T -> T Source #

root :: Basis -> Integer -> T -> T Source #

cosSinhSmall :: Basis -> T -> (T, T) Source #

Absolute value of argument should be below 1.

cosSinSmall :: Basis -> T -> (T, T) Source #

Absolute value of argument should be below 1.

cosSinFourth :: Basis -> T -> (T, T) Source #

Like cosSinSmall but converges faster. It calls cosSinSmall with reduced arguments using the trigonometric identities cos (4*x) = 8 * cos x ^ 2 * (cos x ^ 2 - 1) + 1 sin (4*x) = 4 * sin x * cos x * (1 - 2 * sin x ^ 2)

Note that the faster convergence is hidden by the overhead.

The same could be achieved with a fourth power of a complex number.

cosSin :: Basis -> T -> (T, T) Source #

tan :: Basis -> T -> T Source #

cot :: Basis -> T -> T Source #

logarithmic functions

lnSmall :: Basis -> T -> T Source #

lnNewton :: Basis -> T -> T Source #

x' = x - (exp x - y) / exp x
   = x + (y * exp (-x) - 1)

First, the dependencies on low-significant places are currently much more than mathematically necessary. Check *Number.Positional> expSmall 1000 (-1,100 : replicate 16 0 ++ [undefined]) (0,[1,105,171,-82,76*** Exception: Prelude.undefined Every multiplication cut off two trailing digits. *Number.Positional> nest 8 (mul 1000 (-1,repeat 1)) (-1,100 : replicate 16 0 ++ [undefined]) (-9,[101,*** Exception: Prelude.undefined

Possibly the dependencies of expSmall could be resolved by not computing mul immediately but computing mul series which are merged and subsequently added. But this would lead to an explosion of series.

Second, even if the dependencies of all atomic operations are reduced to a minimum, the mathematical dependencies of the whole iteration function are less than the sums of the parts. Lets demonstrate this with the square root iteration. It is (1.4140 + 21.4140) 2 == 1.414213578500707 (1.4149 + 21.4149) 2 == 1.4142137288854335 That is, the digits 213 do not depend mathematically on x of 1.414x, but their computation depends. Maybe there is a glorious trick to reduce the computational dependencies to the mathematical ones.

ln :: Basis -> T -> T Source #

angle :: Basis -> (T, T) -> T Source #

This is an inverse of cosSin, also known as atan2 with flipped arguments. It's very slow because of the computation of sinus and cosinus. However, because it uses the atan2 implementation as estimator, the final application of arctan series should converge rapidly.

It could be certainly accelerated by not using cosSin and its fiddling with pi. Instead we could analyse quadrants before calling atan2, then calling cosSinSmall immediately.

arctanSeries :: Basis -> T -> Series Source #

Arcus tangens of arguments with absolute value less than 1 / sqrt 3.

arctanStem :: Basis -> Digit -> T Source #

Efficient computation of Arcus tangens of an argument of the form 1/n.

arctan :: Basis -> T -> T Source #

This implementation gets the first decimal place for free by calling the arcus tangens implementation for Doubles.

arctanClassic :: Basis -> T -> T Source #

A classic implementation without 'cheating' with floating point implementations.

For x < 1 / sqrt 3 (1 / sqrt 3 == tan (pi/6)) use arctan power series. (sqrt 3 is approximately 19/11.)

For x > sqrt 3 use arctan x = pi/2 - arctan (1/x)

For other x use

arctan x = pi/4 - 0.5*arctan ((1-x^2)/2*x) (which follows from arctan x + arctan y == arctan ((x+y) / (1-x*y)) which in turn follows from complex multiplication (1:+x)*(1:+y) == ((1-x*y):+(x+y))

If x is close to sqrt 3 or 1 / sqrt 3 the computation is quite inefficient.

constants

elementary

transcendental

auxilary functions

sliceVertPair :: [a] -> [(a, a)] Source #