Jan Skibinski, Numeric Quest Inc., Huntsville, Ontario, Canada
1999.10.08, last modified 1999.10.16
This is a quick sketch of what might be a basis of a real Tensor module. This module has quite a few limitations (listed below). I'd like to get some feedback on what should be a better way to design it properly. Nevertheless, this module works and is able to tackle complex and mundane manipulations in the very straightforward way.
There are few arbitrary decisions we have taken. For example, we consider a scalar to be a tensor of rank 0. This forces us to do conversions between true scalars and such tensors, but it also saves us a lot of headache related to typing restrictions. This is a typical price paid for (too much?) generalization.
To get rid of those awful sums appearing in multiplications of tensors we do introduce Einstein's summation convention by the way of text examples -- followed by the equivalent Haskell examples. Hopefully it is clear and be well appreciated for its economy of notation, which is standard in the tensor calculus.
Tensor defined here is an instance
That means that one can compare tensors for equality and perform
basic numerical calculations, such as addition, negation,
subtraction, multiplication, etc. -- using standard notation
(==), (/=), (+), (-), (*). In addition, several
customized operations, such as
(<<*>>) are defined for
variety of inner products.
Limitations of this module:
But speed has not been tested yet, so we really do not know how inefficient this module is and all of the above is just a pure speculation. Certain operations of this module seem to be quite well matched with this tree-like data structure, and because of it this design decision might be not so bad after all.
dims. At first it might seem as a severe limitation, but in fact one should never mix tensors with different dimensions. One usually works either with three-dimensional tensors (classical mechanics, electrodynamics, elasticity, etc.) or the four-dimentional tensors (relativity theory).
Indices will assume values from range (1,dims) (defined below).> module Tensor where > import Data.Array(inRange) > infixl 9 # -- used for tensor indexing > infixl 9 ## -- used for indices expressed as lists > infixl 7 <*> -- inner product with one bound > infixl 7 <<*>> -- inner product with two bounds
Tensor can contain a scalar value or a list of tensors. This recursively defines tensor of any rank in n-D space.
There is no way we could specify the length of the list> data Tensor = S Double > | T [Tensor]
[Tensor]in the data declaration. Typing is not concerned with shapes. We could of course use more specific representation of this data structure, such as:
data Tensor = S Double | T Tensor Tensor Tensorbut then we would severily limit ourselves to three-dimensional tensors.
Rank is either 0 (scalars), 1 (vectors), or higher: 2, 3, 4 ...
Here we define our tensor dimension as constant for this module. All binary operations on tensors require the same dimensions, so it makes sense to treat dimensions as constants. But ranks can be different.> rank :: Tensor -> Int > rank t = rank' 0 t where > rank' n (S _) = n > rank' n (T xs) = rank' (n+1) (head xs)
> dims :: Int > dims = 3
Tensors are printed as recursive lists with a word "Tensor" prepended
> instance Show Tensor where > showsPrec 0 (S a) = showString "Tensor " . showsPrec 0 a > showsPrec n (S a) = showsPrec n a> showsPrec 0 (T xs) = showString "Tensor " . showList' 0 xs > showsPrec n (T xs) = showList' n xs> showList' :: (Show t) => Int -> [t] -> String -> String > showList' _  = showString "" > showList' n (x:xs) = showChar '[' . showsPrec (n+1) x . showRem (n+1) xs > where > showRem _  = showChar ']' > showRem o (y:ys) = showChar ',' . showsPrec o y . showRem o ys
Although tensors are printed as structured list it is easier to input data via flat lists. But make sure that the length of the list is one of: dims^0, dims^1, dims^2, dims^3, dims^4, etc.
This function is quite inefficient for ranks higher than 4. Compare, for example, timings of:
tensor [1..3^6] tensor [1..3^3] * tensor [1..3^3]Although both expressions create tensors of the same rank 6, but the execution of the latter is much faster. This is because the function
tensorspends much of its effort on recursively restructuring the flat lists into the lists-of-lists-of-lists...
> tensor :: [Double] -> Tensor > tensor xs > | size == 1 = S (head xs) > | q /= 0 = error "Length is not a power of dims" > | otherwise = T (tlist p xs) > where > (p,q) = rnk 1 (quotRem size dims) > rnk m (1, v) = (m, v) > rnk m (u, 0) = rnk (m+1) (quotRem u dims) > rnk m (_, v) = (m, v) > size = length xs > group n ys = group' n ys  where > group' o zs as > | length zs == 0 = reverse as > | length zs < o = reverse (zs:as) > | otherwise = group' o (drop o zs) ((take o zs):as) > > tlist :: Int -> [Double] -> [Tensor] > tlist 1 zs = map S zs > tlist rnl zs = tlist' (rnl-1) (map S zs) > where > tlist' 0 fs = fs > tlist' o fs = tlist' (o-1) $ map T $ group dims fs
Extraction and conversion
Tensor components are also tensors and can be extracted via (#) operator
Tensors of rank 0 can be converted to scalars; i.e., simple numbers of type Double.> ( # ) :: Tensor -> Int -> Tensor > (S a1) # 1 = S a1 > (S _) # _ = error "out of range" > (T xs) # i = xs!!(i-1)> ( ## ) :: Tensor -> [Int] -> Tensor > a ##  = a > a ## (x:xs) = (a#x) ## xs
Tensors of rank 1 can be converted to vectors; i.e., lists with "dims" components of type Double> scalar :: Tensor -> Double > scalar (S a) = a > scalar (T _) = error "rank not 0"
> vector :: Tensor -> [Double] > vector (S _) = error "rank not 1" > vector a@(T xs) > | rank a /= 1 = error "rank not 1" > | otherwise = map scalar xs
Useful tensors: epsilon and delta
Function "epsilon' i j k" emulates values of the pseudo-tensor Eijk. It is valid only for three-dimensional tensors. It takes three indices i,j,k from the range (1,3) and returns one of the three values: 0.0, 1.0, -1.0 -- depending on the rules specified below:
Function "delta' i j" emulates Kronecker's delta:> epsilon' :: Int -> Int -> Int -> Double > epsilon' i j k > | dims /= 3 = error "not 3-dims" > | outside (1,3) i j k = error "Not in range" > | (i == j) || (i == k) || (j == k) = 0 > | otherwise = epsilon1 i j k > where > epsilon1 m n o > | (m == 1) && (n == 2) && (o == 3) = 1 > | (m == 3) && (n == 2) && (o == 1) = -1 > | otherwise = epsilon1 n o m > outside (p,q) a b c = > (not $ inRange (p,q) a) || > (not $ inRange (p,q) b) || > (not $ inRange (p,q) c)
Delta' and epsilon' can be converted to tensors> delta' :: Int -> Int -> Double > delta' i j > | i == j = 1 > | otherwise = 0
The components delta[ij] and epsilon[i,j,k] can be extracted and converted to numbers. For example:> delta, epsilon :: Tensor > delta = tensor [delta' i j | i <- [1..dims], j <- [1..dims]] > epsilon = tensor [epsilon' i j k | i <- [1..3], j <- [1..3], k <- [1..3]]
scalar (epsilon#1#2#3) = 1 scalar (epsilon#1#1#3) = 0, scalar (epsilon#3#2#1) = -1
Dot product of two tensors of rank 1 could be defined as tensor of rank 0. This is not the most efficient implementation but we still want the dot product to be recognised as tensor, so we loose on speed here:
> dot :: Tensor -> Tensor -> Tensor > dot a b = S (sum [scalar (a#i) * scalar (b#i) | i <- [1..dims]])
Cross product - valid for 3D space only
The cross product of two vectors is another vector: C = A x B. The pseudotensor Eijk is used to compute such cross product.
First, here are numerical components of C, C[i]:
And here is the full vector C (as tensor of rank 1):> cross' :: Tensor -> Tensor -> Int -> Double > cross' a b i = sum [(epsilon' i j k)* scalar (a#j) * scalar (b#k)| > j<-[1..3],k<-[1..3], j/=k]
Example:> cross :: Tensor -> Tensor -> Tensor > cross a b = tensor (map (cross' a b) [1..3])
cross (tensor [1..3]) (tensor [1,8,1]) ==> Tensor [-22.0, 2.0, 6.0]
Equality of tensors
Tensor can be admitted to class
Eq. We only need to
define either equality or nonequality operation. We've chosen
to define the former: two tensors are equal if they have the same
rank and equal components:
> instance Eq Tensor where > (==) a b > | ranka /= rank b = False > | ranka == 0 = scalar a == scalar b > | otherwise = and [(a#i) == (b#i) | i <- [1..dims]] > where > ranka = rank a >
Tensor as instance of class Num
To admit tensors to class
Num we have to
support all the operations from that class. Here is
the class Num declaration taken from the Prelude:
class (Eq a, Show a) => Num a where (+), (-), (*) :: a -> a -> a negate :: a -> a abs, signum :: a -> a fromInteger :: Integer -> a -- Minimal complete definition: All, except negate or (-) x - y = x + negate y negate x = 0 - xAll operations but
(*)are straightforward, meaningful and easy to implement. The semantics of multiplication
(*)is, however, not so obvious and it is up to us how to define it: as an inner product or as an outer product. We have chosen the latter, which means that the operation
c = a * bproduces a new tensor
cwhose rank is a sum of the ranks of tensors being multiplied:
rank c = rank a + rank bSuffice to add that tensor products are generally not commutative; that is:
a * b /= b * aThat said, here is the instantiation of
Numfor datatype Tensor:
Having defined the operation> instance Num Tensor where > (+) a b > | ranka /= rank b = error "different ranks" > | ranka == 0 = S (scalar a + scalar b) > | otherwise = T [a#i + b#i | i <- [1..dims]] > where > ranka = rank a> negate (S a1) = S (negate a1) > negate (T xs) = T (map negate xs)> abs (S a1) = S (abs a1) > abs (T xs) = T (map abs xs)> signum (S a1) = S (signum a1) > signum (T xs) = T (map signum xs)> fromInteger n = S (fromInteger n)> (*) (S a1) (S b1) = S (a1*b1) > (*) a@(S _) (T xs) = T (map (a*) (take dims xs)) > (*) (T xs) b = T (map (*b) (take dims xs))
(*)as an outer product such operation will generally increase the rank of the outcome. For example, if
ais a tensor of rank 2 (matrix) and
bis a tensor of rank 1 (vector) then the result is a tensor of rank 3:
c = a * b, that is c[ijk] = a[ij] b[k]But this is not what is typically considered a multiplication of tensors; we are more often than not interested in the inner products, informally described below.
Eistein's indexing convention of tensors is based on
the distinction between free indices and bound indices.
Free indices appear in the tensorial expressions, such
A[ijkl], once only and they indicate
a freedom for substitution of any specific index
from the range of valid indices. This range is (1,3)
for 3D tensors. The expression
represents in fact one of 3^4 possible components
of the tensor
Bound indices, on the other hand, appear in pairs (and only in pairs) and they indicate the summation of tensor expression over the valid range. For example,
A[kkj] = A[11j] + A[22j] + A[33j]Note that the index "j" is still free, and that means that the above represents three equations for j = 1,2,3.
A process of converting of a pair of free indices to a pair of bound indices is called contraction. As a result a rank of a tensor (or expression involving several tensors) is being reduced by two.
contract below accepts a tensor of a
rank bigger or equal 2 and two integers m,n from the range (1,rank a)
which indicate positions of the two indices to be used for
contraction. The result is a tensor with its rank reduced
Let's take for example tensor> contract :: Int -> Int -> Tensor -> Tensor > contract m n a > | m >= n = error "wrong ordering" > | outside m n = error "not in range" > | ranka < 2 = error "cannot contract" > | ranka == 2 = S (sum [scalar (a#i#i) | i <- [1..dims]]) > | ranka > 2 = tensor [summa m n us a | us <- freeIndices (ranka-2)] > where > ranka = rank a > > outside p q = (not $ inRange (1,ranka) p) > ||(not $ inRange (1,ranka) q) > summa p q xs b = sum [scalar (b##(insert p q xs r)) | > r <- [1..dims]]> -- Insert element r at positions m n to the list > -- of indices xs > insert o p xs r = us++[r]++ws++[r]++zs > where > (us,vs) = splitAt (o-1) xs > (ws,zs) = splitAt (p - o - 1) vs > > freeIndices 1 = [[x] | x <- [1..dims]] > freeIndices o = [x:y | x <- [1..dims], y <- freeIndices (o-1)]
deltaand contract it in its two indices:
delta [kk] = delta[1,1] + delta[2,2] + delta[3,3] = 1 + 1 + 1 = 3The same can be done in Haskell:
contract 1 2 delta ==> Tensor 3.0 rank (contract 1 2 delta) ==> 0
The inner product of two tensors can be considered as two-phase process: first the outer product is formed and then a contraction is applied to a selected pair of indices. There are countless possibilities of defining such inner products, since we can choose any pair, or even more than one pair, of indices to become bound.
How do we usually multiply tensors? Here is one example, which is equivalent to matrix-vector multiplication:
C[i] = A[ij] B[j]Notice two types of indices: index "i" is free since it appears only once on both sides of the equation. It means that you can freely substitute 1,2 or 3 for "i". So in fact we have here three equations:
C = A[1j] B[j] C = A[2j] B[j] C = A[3j] B[j]Index "j" is bound - it appears two times on the right hand side, but not on the left side. Bound indices signify summation from 1 to 3. So the above in fact means:
C = A B + A B + A B C = A B + A B + A B C = A B + A B + A BThe economy of notation is evident in our first form above. How will we do it in Haskell?
To obtain the above result we will first form the outer product of matrix A and vector B, obtain a tensor of rank 3, and then contract it in indices 2 and 3 to obtain a the final expected result (inner product):
c = contract 2 3 (a * b)This approach is quite inefficient storage-wise and speed-wise and a direct customized encoding which avoids creating outer products is recommended instead.
The system of equations
C[i] = A[ij] B[j]could obviously be represented explicite as:
c i = sum [scalar(a#i#j) * scalar(b#j) | j <- [1..dims]] -- valid for i = 1..dimsBut when efficiency is not a premium we could still take advantage of function
contractto write clear code that avoids the explicit sums. The operator
<*>, introduced below, allows us to write the same function as:
c = a <*> b -- the output is a tensor of rank 1 c' i = (a <*> b)#i -- the output is a tensor of rank 0 c'' i = scalar ((a <*> b)#i) -- the output is a number
Convenience operators for inner products
Variety of specialized functions for inner products could be defined. We will show few examples here and introduce specialized convenience operators for most common types of inner products. Please note that the proposed operators are not standard in any way, and we are not trying to suggest that they are important. Just treat them as examples.
The semantics of operator
been chosen to support matrix-vector or vector-matrix
multiplications. But this operator is more general
than that, because it also handles products with scalars
(tensors of rank 0), and generally any products
of any two tensors with bounds imposed on one pair
of indices: last index of the first tensor and first
index of the second tensor.
Take for example a classical identity:> (<*>) :: Tensor -> Tensor -> Tensor > a <*> b > | (ranka == 0) || (rankb == 0) = a * b > | otherwise = contract ranka (ranka + 1) (a * b) > where > ranka = rank a > rankb = rank b
A[i] = delta[ij] B[j], where delta is a Kronecker's deltaHere is an example of how we can use it in Haskell:
delta <*> tensor [4,5,6]) ==> Tensor [4.0, 5.0, 6.0] (delta <*> tensor [4,5,6])#1 ==> Tensor 4.0Let's try something more complex, for example a constitutive equation relating the stress tensor S[ij] with the deformation tensor G[kl]. The tensor C[ijkl] is an anisotropic tensor of material constants: 81 altogether. In fact, due to all sorts of symmetries this number could be reduced to twenty-something for the most complex crystals, and to two independent components for the isotropic materials. Anyway, the relation is linear and can be written as follows:
S[ij] = C[ijkl] G[kl]This represents 9 equations (i,j->1,2,3) and expands heavily to sums over k and l on the right-hand side. We need to impose two bounds in two pairs of indices to support above example. Here is another specialized operator for inner product with two specificly selected bounds.
Here is a dummy, but easy to generate example of the above:> (<<*>>) :: Tensor -> Tensor -> Tensor > a <<*>> b > | (ranka < 2) || (rankb < 2) = error "rank too small" > | otherwise = contract (ranka-1) ranka > (contract ranka (ranka+2) (a * b)) > where > ranka = rank a > rankb = rank b
tensor [1..81] <<*>> tensor [1..9] ==> s = Tensor [[ 285.0, 690.0, 1095.0], [1500.0, 1905.0, 2310.0], [2715.0, 3120.0, 3525.0]] (tensor [1..81] <<*>> tensor [1..9])#1#1 = Tensor 285.0
Double cross products
Here is another useful example of tensor multiplication. Say you want to compute a cross product of three vectors:
D = C X (A x B )In index notation this could be expressed as:
D[i] = E[ijk] C[j] E[kpq] A[p] B[q]This represents three equations for i=1,2,3. All other indices j,k,p,q are bound; that is, they appear in pairs on the right hand side, indicating four sums. Although you can calculate it directly, and this Haskell module can do it easily, we can simplify this equation by organizing it differently and using this identity:
E[ijk] = E[kij](Even permutation of indices does not change a sign of pseudo-tensor E.)
D[i] = E[kij] E[kpq] C[j] A[p] B[q]Now here is another useful identity, which gets rid of the bound index "k" (sitting in the first position above):
E[kij] E[kpq] = delta[ip] delta[jq] - delta[iq] delta[jp]After substitution and using identity
delta[ij] G[j] = G[i]the
C x (A x B)transforms to:
D[i] = C[j] B[j] A[i] - C[j] A[j] B[i]We still have three scalar equations, but they are less complex: there is only one summation (over the "j") on the right hand side.
You should easily recognize that
represents the scalar product. Therefore our double cross product
can be represented as a difference of two vectors:
D = C x (A x B) = (C o B) A - (C o A) BNow, let us see how this module handles this. Let's take an example of three randomly chosen vectors A, B, C. The direct method is straightforward, although it involves quite a lot of multiplications and summations (which would not be so evident if we have not done all those preliminary examinations above).
On the other hand we could encode the equivalent equation:> d_standard :: Tensor > d_standard = cross c (cross a b) where > a = tensor [1,2,3] > b = tensor [3,1,8] > c = tensor [5,2,4]
D = (C o B) A - (C o A) Bas:
Both> d_simpler :: Tensor > d_simpler = > tensor [n1 * scalar (a#i) - n2 * scalar (b#i) | i <- [1..dims]] where > > a = tensor [1,2,3] > b = tensor [3,1,8] > c = tensor [5,2,4] > n1 = scalar (c `dot` b) > n2 = scalar (c `dot` a)
d_simplerlead to the same result:
==> Tensor [-14.0, 77.0, -21.0]
A vector can be decomposed in any system of reference. The best
choice is any orthogonal system of reference, where all base
unit vectors are mutually perpendicular (orthogonal), since this
simplifies the computations. The base vectors
e, e, e
are usually chosen as vectors of length one (we say that they are
normalized to one), and hence they are called "orthonormal".
They obey the orthonormality relations for their scalar products:
e[i] o e[j] = delta[ij]where the Kronecker's "delta" has been defined before.
Here is an example of the vector decomposition:
A = A[i] e[i] (summation over "i"!)The components A[i] of the vector A obviously depend on the choice of the base system. The same vector A will have different components in two different systems of references:
A'[i] e'[i] = A[i] e[i]where primes refer to the new system. Now, if we multiply both sides of the above equation by a base vector
e'[k], using the scalar (dot) product definition, we will get:
A'[i] e'[k] o e'[i] = A[i] e'[k] o e[i]The new base vectors are mutually orthonormal, so
e'[k] o e'[i] = delta[ki]and the left hand side will be transformed to:
A'[i] delta[ki] = A'[k]But the base vectors on the right hand side are taken from two different systems, and therefore they are not mutually orthonormal. All such nine scalar products form the components of the transormation tensor, R:
R[ki] = e'[k] o e[i]As a result, our original equation can be expressed as a new equation defining transformation of the vector A:
A'[k] = R[ki] A[i]This gives us a rule how to compute new components A'[k] of vector A from its old components and transformation tensor R[ki].
You might want to run some exercise choosing the old system with the base vectors:
e#1=tensor [1,0,0] e#2=tensor [0,1,0] e#3=tensor [0,0,1],where "e" can be considered a tensor of rank 2:
e = tensor [1,0,0, 0,1,0, 0,0,1]and the new system obtained from the old one by rotation around the axis 3 (x3, or z) by an angle "alpha". Some trigonometry will be involved to compute the new base vectors, e'[i]. The next step is to compute tensor R[ki]
r = tensor [scalar (e'#k `dot` e#i)|k<-[1..dims], i<-[1..dims]]and finally use operator
<*>to compute new components of vector A:
a' = r <*> a
Related page on this site: Collection of Haskell modules
----------------------------------------------------------------------------- -- -- Copyright: -- -- (C) 1999 Numeric Quest Inc., All rights reserved -- -- Email: -- -- firstname.lastname@example.org -- -- License: -- -- GNU General Public License, GPL -- -----------------------------------------------------------------------------