pandoc-plot turns code blocks present in your documents (Markdown, LaTeX, etc.) into embedded figures, using your plotting toolkit of choice, including Matplotlib, ggplot2, MATLAB, Mathematica, and more.
You can also specify a caption for your image. This is done using the optional caption parameter.
Markdown:
```{.matlabplot caption="This is a simple figure with a **Markdown** caption"}
x = 0: .1 : 2*pi;
y1 = cos(x);
y2 = sin(x);
figure
plot(x, y1, 'b', x, y2, 'r-.', 'LineWidth', 2)
```LaTex:
\begin{minted}[caption=This is a simple figure with a caption]{matlabplot}
x = 0: .1 : 2*pi;
y1 = cos(x);
y2 = sin(x);
figure
plot(x, y1, 'b', x, y2, 'r-.', 'LineWidth', 2)
\end{minted}Caption formatting unfortunately cannot be determined automatically. To specify a caption format (e.g. “markdown”, “LaTeX”, etc.), see Configuration.
In case of an output format that supports links (e.g. HTML), the embedded image generated by pandoc-plot can show a link to the source code which was used to generate the file. Therefore, other people can see what code was used to create your figures.
You can turn this on via the source=true key:
Markdown:
```{.mathplot source=true}
...
```LaTex:
\begin{minted}[source=true]{mathplot}
...
\end{minted}or via a configuration file.
If you find yourself always repeating some steps, inclusion of scripts is possible using the preamble parameter. For example, if you want all Matplotlib plots to have the ggplot style, you can write a very short preamble style.py like so:
import matplotlib.pyplot as plt
plt.style.use('ggplot')and include it in your document as follows:
```{.matplotlib preamble=style.py}
plt.figure()
plt.plot([0,1,2,3,4], [1,2,3,4,5])
plt.title('This is an example figure')
```Which is equivalent to writing the following markdown:
```{.matplotlib}
import matplotlib.pyplot as plt
plt.style.use('ggplot')
plt.figure()
plt.plot([0,1,2,3,4], [1,2,3,4,5])
plt.title('This is an example figure')
```The equivalent LaTeX usage is as follows:
\begin{minted}[include=style.py]{matplotlib}
\end{minted}This preamble parameter is perfect for longer documents with many plots. Simply define the style you want in a separate script! You can also import packages this way, or define functions you often use.
Starting with version 0.8.0.0, pandoc-plot supports the creation of interactive plots (if a toolkit supports it). All you need to do is set the save format to html. The resulting plot is fully self-contained, so it can be displayed offline.
pandoc-plot minimizes work, only generating figures if it absolutely must, i.e. if the content has changed. pandoc-plot will save the hash of the source code used to generate a figure in its filename. Before generating a figure, pandoc-plot will check it this figure already exists based on the hash of its source! This also means that there is no way to directly name figures.
Moreover, starting with version 0.5.0.0, pandoc-plot takes advantage of multicore CPUs, rendering figures in parallel.
Therefore, you can confidently run the filter on very large documents containing hundreds of figures, like a book or a thesis.
pandoc-crossref is a pandoc filter that makes it effortless to cross-reference objects in Markdown documents.
You can use pandoc-crossref in conjunction with pandoc-plot for the ultimate figure-making pipeline. You can combine both in a figure like so:
```{#fig:myexample .plotly_python caption="This is a caption"}
# Insert figure script here
```
As you can see in @fig:myexample, ...If the above source is located in file myfile.md, you can render the figure and references by applying pandoc-plot first, and then pandoc-crossref. For example:
pandoc --filter pandoc-plot --filter pandoc-crossref -i myfile.md -o myfile.htmlpandoc-plot is a command line executable with a few functions. You can take a look at the help using the -h/--help flag:
pandoc-plot 1.0.2.0 - generate figures directly in documents
Usage: pandoc-plot.EXE [(-v|--version) | --full-version | (-m|--manual)]
[COMMAND] [AST]
This pandoc filter generates plots from code blocks using a multitude of
possible renderers. This allows to keep documentation and figures in perfect
synchronicity.
Available options:
-v,--version Show version number and exit.
--full-version Show full version information and exit.
-m,--manual Open the manual page in the default web browser and
exit.
-h,--help Show this help text
Available commands:
toolkits Show information on toolkits and exit.
clean Clean output directories where figures from FILE and
log files might be stored. WARNING: All files in
those directories will be deleted.
write-example-config Write example configuration to a file and exit.
More information can be found via the manual (pandoc-plot --manual) or the
repository README, located at https://github.com/LaurentRDC/pandoc-plotThe most common use for pandoc-plot is as a pandoc filter, in which case it should be called without arguments. For example:
pandoc --filter pandoc-plot -i input.md -o output.htmlIf pandoc-plot fails to render a code block into a figure, the filtering will not stop. Your code blocks will stay unchanged, unless you activate strict mode.
You can chain other filters with it (e.g., pandoc-crossref) like so:
pandoc --filter pandoc-plot --filter pandoc-crossref -i input.md -o output.htmlThe syntax for code blocks in documents is shown below. pandoc-plot looks for code blocks with a specific class, depending on the toolkit you want to use. pandoc-plot will run the code and capture the figure output. There can only be one figure per code block.
The possible parameters and options are described in further below.
```{.cls param1=value1 param2=value2 ...}
# script content
```Note that the minted LaTeX package need not be installed.
\begin{minted}[param1=value1, param2=value2, ...]{cls}
...
\end{minted}There are parameters that affect the figure that will be included in your document. Here are all the possible general parameters, in Markdown syntax:
```{.cls
.language
directory=(path)
caption=(text)
format=(PNG|PDF|SVG|JPG|EPS|GIF|TIF|WEBP|HTML)
source=(true|True|false|False)
source_label=(text)
preamble=(path)
dpi=(integer)
dependencies=[...]
file=(path)
executable=(path)
caption_format=(text)
}
# script content
```cls must be one of the following: matplotlib, matlabplot, plotly_python, plotly_r, mathplot, octaveplot, ggplot2, gnuplot, graphviz, bokeh, plotsjl.All following parameters are optional, with their default values controlled by the configuration.
language specifies the programming language used in this block. This parameter is ignored by pandoc-plot, but your text editor may use it to highlight code. See Code highlighting below.directory is a path to the directory where the figure and source code will be saved. You cannot control the file name. This path is either absolute, or relative from the working directory where you call pandoc-plot.caption is the caption text. The format of the caption is specified in the caption_format parameter, described below.format is the desired filetype for the resulting figure. Possible values for format are [PNG, PDF, SVG, JPG, EPS, GIF, TIF, WEBP, HTML]. Not all toolkits support all formats. See pandoc-plot toolkits for toolkit-specific information regarding save formats. The HTML format is special; it can produce standalone, offline, interactive plots. As such, it only makes sense to use this format when creating HTML documents.source is a boolean toggle that determines whether the source code should be linked in the caption or not. Possible values are [true, True, false, False].source_label is the text that links to source code (if source=true). This is useful if you are writing text in a different language. The default is source_label="Source Code". You might want to set this via the configuration instead.preamble is a path to a script that will be included as a preamble to the content of the code block. This path is either absolute, or relative from the working directory where you call pandoc-plot.dpi is the pixel density of the figure in dots-per-inch. Possible values are positive integers. Not all toolkits respect this.dependencies is a list of files/directories that affect the figure, for example data files. If one of those files/directories changes, pandoc-plot will re-render the associated figure. Format is a comma-separated list, e.g. dependencies=[data.txt, foo.bar, ~/wtv]. Values for dependencies in the configuration file will be appended to the values in a code block.file is a path to a file from which to read the figure content. If this parameter is used, the content of the code block is ignored. By using this parameter, you can use all the standard tooling of your plotting toolkit of choice, which is especially useful for complex figures.executable is a path to the executable to use (e.g. C:\\python3.exe) or the name of the executable (e.g. python3).caption_format is the text format of the caption. Possible values are exactly the same as pandoc’s format specification, usually FORMAT+EXTENSION-EXTENSION. For example, captions in Markdown with raw LaTeX would be parsed correctly provided that caption_format=markdown+raw_tex. See Pandoc’s guide on Specifying formats.If your editor supports code highlighting in code blocks, you can also include the programming language. In Markdown:
```{.language .cls (options)}
# script content
```or Latex:
\begin{minted}[(options)]{language, cls}
# script content
\end{minted}For example, for GGPlot2 figures:
```{.r .ggplot2 caption=Highlighted code block}
# script content
```or (Latex):
\begin{minted}[caption=Highlighted code block]{r, ggplot2}
# script content
\end{minted}This way, you benefit from code highlighting and pandoc-plot.
Interactive HTML figures are available for a few toolkits, e.g. bokeh. To make a figure interactive, use the output format format=html. This only makes sense if your output file is also HTML.
You can take a look at the demonstration page for an example result.
Many interactive plots rely on javascript scripts stored on the internet. If you want to have a self-contained document that can be viewed offline – or you want your document to work for the next 10 years –, you can use pandoc’s --self-contained flag:
pandoc --self-contained --filter pandoc-plot -i mydoc.md -o webpage.html The resulting output webpage.html will contain everything, at the cost of size.
To avoid repetition, pandoc-plot can be configured using simple YAML
files. Here are all the possible parameters:
# This is an example configuration. Everything in this file is optional.
# Please refer to the documentation to know about the parameters herein.
#
# The `executable` parameter for all toolkits can be either the
# executable name (if it is present on the PATH), or
# the full path to the executable.
# E.g.:
# executable: python3
# executable: "C:\Python37\Scripts\python.exe"
# The following parameters affect all toolkits
# Directory where to save the plots. The path can be relative to pandoc-plot's
# current working directory, or absolute.
directory: plots/
# Whether or not to include a link to the source script in the caption.
# Particularly useful for HTML output.
source: false
# When `strict: false`, pandoc-plot will leave code blocks untouched if a plot
# could not be generated. This could happen if, for example, a toolkit is not
# installed. If you want pandoc-plot to fail instead, use `strict: true`.
strict: false
# Text label for links to source code.
# You can change this label if you are writing a document in a non-English language.
# This only matters if `source` is set to `true`.
source_label: Source code
# Default density of figures in dots per inches (DPI).
# This can be changed in the document specifically as well.
dpi: 80
# Default format in which to save the figures. This can be specified
# individually as well.
format: PNG
# Default files/directories on which all figures depend. If any of these files/directories
# changes, all figures will be re-rendered.
# Dependencies specified in code blocks will be appended to this list.
dependencies:
- file1.txt
- file2.txt
# Text format for the captions. Unfortunately, there is no way to detect
# this automatically. You can use the same notation as Pandoc's --from
# parameter, specified here:
# https://pandoc.org/MANUAL.html#option--from
# Example: markdown, rst+raw_tex
caption_format: markdown+tex_math_dollars
# Logging configuration
logging:
# Possible verbosity values: debug, error, warning, info, silent
verbosity: warning
# If the filepath below is not present, then pandoc-plot will log to stderr
# Otherwise, log messages will be appended to the filepath.
# filepath: path/to/file.txt
# The possible parameters for the Matplotlib toolkit
matplotlib:
# preamble: matplotlib.py
tight_bbox: false
transparent: false
executable: python
command_line_arguments:
# The possible parameters for the MATLAB toolkit
matlabplot:
# preamble: matlab.m
executable: matlab
command_line_arguments:
# The possible parameters for the Plotly/Python toolkit
plotly_python:
# preamble: plotly-python.py
executable: python
command_line_arguments:
# The possible parameters for the Plotly/R toolkit
plotly_r:
# preamble: plotly-r.r
executable: Rscript
command_line_arguments:
# The possible parameters for the Mathematica toolkit
mathplot:
# preamble: mathematica.m
executable: math
command_line_arguments:
# The possible parameters for the GNU Octave toolkit
octaveplot:
# preamble: octave.m
executable: octave
command_line_arguments:
# The possible parameters for the ggplot2 toolkit
ggplot2:
# preamble: ggplot2.r
executable: Rscript
command_line_arguments:
# The possible parameters for the gnuplot toolkit
gnuplot:
# preamble: gnuplot.gp
executable: gnuplot
command_line_arguments:
# The possible parameters for the graphviz toolkit
graphviz:
# preamble: graphviz.dot
executable: dot
command_line_arguments:
bokeh:
# preamble: bokeh.py
executable: python
command_line_arguments:
plotsjl:
# preamble: plotsjl.jl
executable: julia
command_line_arguments:A file like the above sets the default values; you can still override them in documents directly.
The easiest way to specify configuration for pandoc-plot is to place a .pandoc-plot.yml file in the current working directory. You can also specify a configuration file in document metadata, under the plot-configuration key. For example, in Markdown:
---
title: My document
author: John Doe
plot-configuration: /path/to/file.yml
---or on the command line, using the pandoc -M/--metadata flag:
pandoc --filter pandoc-plot -M plot-configuration=/path/to/file.yml ...The hierarchy of configuration files is as follows:
plot-configuration key;.pandoc-plot.yml;The executable parameter for all toolkits can be either the executable name (if it is present on the PATH), or the full path to the executable.
Examples:
matplotlib:
executable: python3matlabplot:
executable: "C:\Program Files\Matlab\R2019b\bin\matlab.exe"New in version 1.0.2.0
The command_line_arguments parameter available for all toolkits provides a way to customize the way interpreters are run. For example, if you want to run the matplotlib toolkit with all warnings shown:
# The possible parameters for the Matplotlib toolkit
matplotlib:
executable: python
command_line_arguments: -WaOr if you want julia to use more than one thread:
# The possible parameters for the Matplotlib toolkit
plotsjl:
executable: julia
command_line_arguments: --threads autotight_bbox is a boolean that determines whether to use bbox_inches="tight" or not when saving Matplotlib figures. For example, tight_bbox: true. See here for details.transparent is a boolean that determines whether to make Matplotlib figure background transparent or not. This is useful, for example, for displaying a plot on top of a colored background on a web page. High-resolution figures are not affected. For example, transparent: true.If you are running pandoc-plot on a large document, you might want to turn on logging. You can do so via the configuration file as follows:
logging:
# Possible verbosity values: debug, error, warning, info, silent
# debug level shows all messages
# error level shows all but debug messages, etc.
verbosity: info
# OPTIONAL: log to file
# Remove line below to log to stderr
filepath: log.txtBy default, pandoc-plot logs warnings and errors to the standard error stream only.
New in version 1.0.2.0
By default, pandoc-plot leaves code blocks unchanged if a figure fails to be rendered. This might be the case if a plotting toolkit is not installed, or if running the code to render a figure returns an error. In strict mode, pandoc-plot will immediately halt if it encounters a problem. You can activate strict mode via configuration:
strict: trueStrict mode is ideal if you want to ensure that the figures are correctly rendered in the document.
You can determine which toolkits are available on your current machine using the pandoc-plot toolkits command. Here is the full help text:
Usage: pandoc-plot.EXE toolkits [--config PATH]
Show information on toolkits and exit.
Available options:
--config PATH Path to optional configuration file.
-h,--help Show this help textFigures produced by pandoc-plot can be placed in a few different locations. You can set a default location in the Configuration, but you can also re-direct specific figures in other directories if you use the directory=... argument in code blocks. These figures will build up over time. You can use the clean command to scan documents and delete the associated pandoc-plot output files. For example, to delete the figures generated from the input.md file:
pandoc-plot clean input.mdThis sill remove all directories where a figure could have been placed. WARNING: all files will be removed.
Here is the full help text for the clean command:
Usage: pandoc-plot.EXE clean [--config PATH] FILE
Clean output directories where figures from FILE and log files might be
stored. WARNING: All files in those directories will be deleted.
Available options:
--config PATH Path to optional configuration file.
-h,--help Show this help textBecause pandoc-plot supports a few toolkits, there are a lot of configuration options. Don’t start from scratch! The write-example-config command will create a file for you, which you can then modify:
pandoc-plot write-example-configYou will need to re-name the file to .pandoc-ploy.yml to be able to use it, so don’t worry about overwriting your own configuration.
Here is the full help text for the write-example-config command:
Usage: pandoc-plot.EXE write-example-config [--path FILE]
Write example configuration to a file and exit.
Available options:
--path FILE Target location of the configuration file. Default is
".example-pandoc-plot.yml"
-h,--help Show this help textDo not run this filter on unknown documents. There is nothing in
pandoc-plot that can stop a script from performing evil actions.