Changelog for propellor-2.8.1

propellor (2.8.1) unstable; urgency=medium * Guard against power loss etc when building propellor, by updating the executable atomically. * Added Logcheck module, contributed by Jelmer Vernooij. * Added Kerberos module, contributed by Jelmer Vernooij. * Privdata that uses HostContext inside a container will now have the name of the container as its context, rather than the name of the host(s) where the container is used. This allows eg, having different passwords for a user in different containers. Note that previously, propellor would prompt using the container name as the context, but not actually use privdata using that context; so this is a bug fix. * Fix --add-key to not fail committing when no privdata file exists yet. -- Joey Hess <> Sun, 04 Oct 2015 13:54:59 -0400 propellor (2.8.0) unstable; urgency=medium * Added Propellor.Property.Rsync. * Convert Info to use Data.Dynamic, so properties can export and consume info of any type that is Typeable and a Monoid, including data types private to a module. (API change) Thanks to Joachim Breitner for the idea. * Improve propellor wrapper to better handle installation cloning the public propellor repo, by setting that repo to be upstream, so propellor doesnt try to push to a read-only repo. * Added DebianMirror module, contributed by Félix Sipma. * Some hlint cleanups. Thanks, Mario Lang * Added Propellor.Property.Unbound for the caching DNS server. Thanks, Félix Sipma. * Added PTR to Dns.Record. While this is ignored by Propellor.Property.Dns for now, since reverse DNS setup is not implemented there yet, it can be used in other places, eg Unbound. Thanks, Félix Sipma. * PrivData converted to newtype (API change). * Stopped stripping trailing newlines when setting PrivData; this was previously done to avoid mistakes when pasting eg passwords with an unwanted newline. Instead, PrivData consumers should use either privDataLines or privDataVal, to extract respectively lines or a value (without internal newlines) from PrivData. * Allow storing arbitrary ByteStrings in PrivData, extracted using privDataByteString. * Added Aiccu module, contributed by Jelmer Vernooij. * Added --rm-key. -- Joey Hess <> Tue, 22 Sep 2015 19:35:07 -0400 propellor (2.7.3) unstable; urgency=medium * Fix bug that caused provisioning new chroots to fail. * Update for Debian systemd-container package split. * Added Propellor.Property.Parted, for disk partitioning. * Added Propellor.Property.Partition, for partition formatting etc. * Added Propellor.Property.DiskImage, for bootable disk image creation. (Experimental and not yet complete.) * Dropped support for ghc 7.4. -- Joey Hess <> Thu, 03 Sep 2015 08:52:51 -0700 propellor (2.7.2) unstable; urgency=medium * Added Propellor.Property.ConfFile, with support for Windows-style .ini files, and generic support for files containing some sort of sections. Thanks, Sean Whitton for completing the implementation. * Added Propellor.Property.LightDM Thanks, Sean Whitton. * Multiple Tor.hiddenService properties can now be defined for a host; previously only one such property worked per host. Thanks, Félix Sipma. -- Joey Hess <> Tue, 25 Aug 2015 12:00:25 -0700 propellor (2.7.1) unstable; urgency=medium * Make sure that make is installed when bootstrapping propellor. * Fix bug in Firewall's Port datatype to iptable parameter translation code. Thanks, Antoine Eiche. -- Joey Hess <> Fri, 14 Aug 2015 15:01:37 -0400 propellor (2.7.0) unstable; urgency=medium * Ssh.permitRootLogin type changed to allow configuring WithoutPassword and ForcedCommandsOnly (API change) * setSshdConfig type changed, and setSshdConfigBool added with old type. * Fix a bug in shim generation code for docker and chroots, that sometimes prevented deployment of docker containers. * Added onChangeFlagOnFail which is often a safer alternative to onChange. Thanks, Antoine Eiche. * Work around broken git pull option parser in git 2.5.0, which broke use of --upload-pack to send a git push when running propellor --spin. -- Joey Hess <> Thu, 30 Jul 2015 12:05:46 -0400 propellor (2.6.0) unstable; urgency=medium * Replace String type synonym Docker.Image by a data type which allows to specify an image name and an optional tag. (API change) Thanks, Antoine Eiche. * Added --unset to delete a privdata field. * Version dependency on exceptions. * Systemd: Add masked property. Thanks, Sean Whitton * Fix make install target to work even when git is not configured. -- Joey Hess <> Fri, 10 Jul 2015 22:36:29 -0400 propellor (2.5.0) unstable; urgency=medium * cmdProperty' renamed to cmdPropertyEnv to make way for a new, more generic cmdProperty' (API change) * Add docker image related properties. Thanks, Antoine Eiche. * Export CommandParam, boolSystem, safeSystem, shellEscape, and createProcess from Propellor.Property.Cmd, so they are available for use in constricting your own Properties when using propellor as a library. * Improve enter-machine scripts for systemd-nspawn containers to unset most environment variables. * Fix Postfix.satellite bug; the default relayhost was set to the domain, not to smtp.domain as documented. * Mount /proc inside a chroot before provisioning it, to work around #787227 * --spin now works when given a short hostname that only resolves to an ipv6 address. * Added publish property for systemd-spawn containers, for port publishing. (Needs systemd version 220.) * Added bind and bindRo properties for systemd-spawn containers. * Firewall: Port was changed to a newtype, and the Port and PortRange constructors of Rules were changed to DPort and DportRange, respectively. (API change) * Docker: volume and publish accept Bound FilePath and Bound Port, respectively. They also continue to accept Strings, for backwards compatibility. * Docker: Added environment property. Thanks Antoine Eiche. -- Joey Hess <> Tue, 09 Jun 2015 17:08:43 -0400 propellor (2.4.0) unstable; urgency=medium * Propellor no longer supports Debian wheezy (oldstable). * Git.bareRepo: Fix bug in calls to userScriptProperty. Thanks, Jelmer Vernooij. * Removed Obnam.latestVersion which was only needed for Debian wheezy backport. * Merged Utility changes from git-annex. * Switched from MonadCatchIO-transformers to the newer transformers and exceptions libraries. * Ensure build deps are installed before building propellor in --spin and cron job, even if propellor was already built before, to deal with upgrades that add new dependencies. -- Joey Hess <> Wed, 06 May 2015 14:28:59 -0400 propellor (2.3.0) unstable; urgency=medium * Make propellor resistent to changes to shared libraries, such as libffi, which might render the propellor binary unable to run. This is dealt with by checking the binary both when running propellor on a remote host, and by Cron.runPropellor. If the binary doesn't work, it will be rebuilt. * Note that since a new switch had to be added to allow testing the binary, upgrading to this version will cause a rebuild from scratch of propellor. * Added hasLoginShell and shellEnabled. * debCdn changed to new official replacement for * API change: Added User and Group newtypes, and Properties that used to use the type UserName = String were changed to use them. -- Joey Hess <> Wed, 22 Apr 2015 13:46:24 -0400 propellor (2.2.1) unstable; urgency=medium * userScriptProperty now passes --shell /bin/sh, so it can be used even for users with nonstandard shells. * Fix bug in docker propellor shim setup introduced in last release, which broke provisioning of new docker containers. -- Joey Hess <> Thu, 12 Mar 2015 20:08:34 -0400 propellor (2.2.0) unstable; urgency=medium * When running shimmed (eg in a docker container), improve process name visible in ps. * Add shebang to cron.daily etc files. * Some changes to tor configuration, minor API change. * Propellor now builds itself, and gets its build dependencies installed when deploying to a new host, without needing the Makefile. -- Joey Hess <> Mon, 09 Mar 2015 12:02:31 -0400 propellor (2.1.0) unstable; urgency=medium * Additional tor properties, including support for making relays, and naming bridges, relays, etc. * New Cron.Times data type, which allows Cron.job to install daily/monthly/weekly jobs that anacron can run. (API change) * Fix Git.daemonRunning to restart inetd after enabling the git server. * Ssh.authorizedKey: Make the authorized_keys file and .ssh directory be owned by the user, not root. * Ssh.knownHost: Make the .ssh directory be owned by the user, not root. -- Joey Hess <> Thu, 12 Feb 2015 12:36:26 -0400 propellor (2.0.0) unstable; urgency=medium * Property has been converted to a GADT, and will be Property NoInfo or Property HasInfo. This was done to make sure that ensureProperty is only used on properties that do not have Info. Transition guide: - Change all "Property" to "Property NoInfo" or "Property WithInfo" (The compiler can tell you if you got it wrong!) - To construct a RevertableProperty, it is useful to use the new (<!>) operator - Constructing a list of properties can be problimatic, since Property NoInto and Property WithInfo are different types and cannot appear in the same list. To deal with this, "props" has been added, and can built up a list of properties of different types, using the same (&) and (!) operators that are used to build up a host's properties. * Add descriptions of how to set missing fields to --list-fields output. * Properties now form a tree, instead of the flat list used before. This includes the properties used inside a container. * Fix info propagation from fallback combinator's second Property. * Added systemd configuration properties. * Added journald configuration properties. * Added more network interface configuration properties. * Implemented OS.preserveNetwork. -- Joey Hess <> Sun, 25 Jan 2015 15:23:08 -0400 propellor (1.3.2) unstable; urgency=medium * SSHFP records are also generated for CNAMES of hosts. * Merge Utiity modules from git-annex. * Ignore bogus DNS when spinning the local host. -- Joey Hess <> Thu, 15 Jan 2015 14:02:07 -0400 propellor (1.3.1) unstable; urgency=medium * Fix bug that prevented deploying ssh host keys when the file for the key didn't already exist. * DNS records for hosts with known ssh public keys now automatically include SSHFP records. -- Joey Hess <> Sun, 04 Jan 2015 19:51:34 -0400 propellor (1.3.0) unstable; urgency=medium * --spin checks if the DNS matches any configured IP address property of the host, and if not, sshes to the host by IP address. * Detect #774376 and refuse to use docker if the system is so broken that docker exec doesn't enter a chroot. * Update intermediary propellor in --spin --via * Added support for DNSSEC. * Ssh.hostKey and Ssh.hostKeys no longer install public keys from the privdata. Instead, the public keys are included in the configuration. (API change) * Ssh.hostKeys now removes any host keys of types that the host is not configured to have. * sshPubKey is renamed to Ssh.pubKey, and has an added SshKeyType parameter. (API change) * CloudAtCost.deCruft no longer forces randomHostKeys. * Fix build with process -- Joey Hess <> Sun, 04 Jan 2015 17:17:44 -0400 propellor (1.2.2) unstable; urgency=medium * Revert ensureProperty warning message, too many false positives in places where Info is correctly propigated. Better approach needed. -- Joey Hess <> Sun, 21 Dec 2014 21:41:11 -0400 propellor (1.2.1) unstable; urgency=medium * Added CryptPassword to PrivDataField, for password hashes as produced by crypt(3). * User.hasPassword and User.hasSomePassword will now use either a CryptPassword or a Password from privdata, depending on which is set. -- Joey Hess <> Wed, 17 Dec 2014 16:30:44 -0400 propellor (1.2.0) unstable; urgency=medium * Display a warning when ensureProperty is used on a property which has Info and is so prevented from propigating it. * Removed boolProperty; instead the new toResult can be used. (API change) * Include Propellor.Property.OS, which was accidentially left out of the cabal file in the last release. * Fix Apache.siteEnabled to update the config file and reload apache when configuration has changed. -- Joey Hess <> Tue, 09 Dec 2014 00:05:09 -0400 propellor (1.1.0) unstable; urgency=medium * --spin target --via relay causes propellor to bounce through an intermediate relay host, which handles any necessary uploads when provisioning the target host. * --spin can be passed multiple hosts, and it will provision each host in turn. * Add --merge, to combine multiple --spin commits into a single, more useful commit. * Hostname parameters not containing dots are looked up in the DNS to find the full hostname. * propellor --spin can now deploy propellor to hosts that do not have git, ghc, or apt-get. This is accomplished by uploading a fairly portable precompiled tarball of propellor. * Propellor.Property.OS contains properties that can be used to do a clean reinstall of the OS of an existing host. This can be used, for example, to do an in-place conversion from Fedora to Debian. This is experimental; use with caution! * Added group-related properties. Thanks, Félix Sipma. * Added Git.barerepo. Thanks, Félix Sipma. * Added Grub.installed and properties. * New HostContext can be specified when a PrivData value varies per host. * hasSomePassword and hasPassword now default to using HostContext. To specify a different context, use hasSomePassword' and hasPassword' (API change) * hasSomePassword and hasPassword now make sure shadow passwords are enabled. * cron.runPropellor now runs propellor, rather than using its Makefile. This is more robust. * propellor.debug can be set in the git config to enable more persistent debugging output. * Run apt-cache policy with LANG=C so it works on other locales. * endAction can be used to register an action to run once propellor has successfully run on a host. -- Joey Hess <> Sun, 07 Dec 2014 15:23:59 -0400 propellor (1.0.0) unstable; urgency=medium * propellor --spin can now be used to update remote hosts, without any central git repository needed. The central git repository is still useful for running propellor from cron, but this simplifies getting started with propellor, and allows for more ad-hoc usage. * The git repo url, if any, is updated whenever propellor --spin is used. * Added prosody module, contributed by Félix Sipma. * Can be used to configure tor hidden services. Thanks, Félix Sipma. * When multiple gpg keys are added, ensure that the privdata file can be decrypted by all of them. * Convert GpgKeyId to newtype. (API change) * DigitalOcean.distroKernel property now reboots into the distribution kernel when necessary. * Avoid outputting color setting sequences when not run on a terminal. * Docker code simplified by using `docker exec`; needs docker 1.3.1. * Docker containers are now a separate data type, cannot be included in the main host list, and are instead passed to Docker.docked. (API change) * Added support for using debootstrap from propellor. * Propellor can now be used to provision chroots. * systemd-nspawn containers can now be managed by propellor, very similar to its handling of docker containers. * Debian package will be maintained by Gergely Nagy. -- Joey Hess <> Fri, 21 Nov 2014 20:58:02 -0400 propellor (0.9.2) unstable; urgency=medium * Added nginx module, contributed by Félix Sipma. * Added firewall module, contributed by Arnaud Bailly. * Apache: Fix daemon reload when enabling a new module or site. * Docker: Stop using; that was a compat symlink in the Debian package which has been removed in 1.3.1~dfsg1-2. Closes: #769452 * Orphaned the Debian package, as I am retiring from Debian. -- Joey Hess <> Sat, 08 Nov 2014 15:57:36 -0400 propellor (0.9.1) unstable; urgency=medium * Docker: Add ability to control when containers restart. * Docker: Default to always restarting containers, so they come back up after reboots and docker daemon upgrades. (API change) * Fix loop when a docker host that does not exist was docked. -- Joey Hess <> Fri, 24 Oct 2014 09:57:31 -0400 propellor (0.9.0) unstable; urgency=medium * Avoid encoding the current stable suite in propellor's code, since that poses a difficult transition around the release, and can easily be wrong if an older version of propellor is used. Instead, the os property for a stable system includes the suite name to use, eg Stable "wheezy". * stdSourcesList uses the stable suite name, to avoid unwanted immediate upgrades to the next stable release. (API change) * debCdn switched from to, which seems to be better managed now. * Docker: Avoid committing container every time it's started up. -- Joey Hess <> Fri, 10 Oct 2014 11:37:45 -0400 propellor (0.8.3) unstable; urgency=medium * The Debian package now includes a single-revision git repository in /usr/src/propellor/, and ~/.propellor/ is set up to use this repository as its origin remote. This avoids relying on the security of the github repository when using the Debian package. * The /usr/bin/propellor wrapper will warn when ~/.propellor/ is out of date and a newer version is available, after which git merge upstream/master can be run to merge it. * Included the config.hs symlink to config-simple.hs in the cabal and Debian packages. -- Joey Hess <> Fri, 22 Aug 2014 13:02:01 -0400 propellor (0.8.2) unstable; urgency=medium * Fix bug in File.containsLines that caused lines that were already in the file to sometimes be appended to the end. * Hostname.sane also configures /etc/mailname. * Fixed Postfix.satellite to really configure relayhost = smtp.domain. * Avoid reconfiguring postfix unncessarily when it already has a relayhost. * Deal with apache 2.4's change in the name of site-available config files. * Hostname aliases can now be used in several places, including --spin and Ssh.knownHost. -- Joey Hess <> Mon, 04 Aug 2014 01:12:19 -0400 propellor (0.8.1) unstable; urgency=medium * Run apt-get update in initial bootstrap. * --list-fields now includes a table of fields that are not currently set, but would be used if they got set. * Remove .gitignore from cabal file list, to avoid build failure on Debian. Closes: #754334 -- Joey Hess <> Wed, 09 Jul 2014 22:11:31 -0400 propellor (0.8.0) unstable; urgency=medium * Completely reworked privdata storage. There is now a single file, and each host is sent only the privdata that its Properties actually use. To transition existing privdata, run propellor against a host and watch out for the red failure messages, and run the suggested commands to store the privdata using the new storage scheme. You may find it useful to run the old version of propellor to extract data from the old privdata files during this migration. Several properties that use privdata now require a context to be specified. If in doubt, you can use anyContext, or Context "" * Add --edit to edit a privdata value in $EDITOR. * Add --list-fields to list all currently set privdata fields, along with the hosts that use them. * Fix randomHostKeys property to run openssh-server's postinst in a non-failing way. * Hostname.sane now cleans up the localhost line in /etc/hosts, to avoid eg, apache complaining "Could not reliably determine the server's fully qualified domain name". -- Joey Hess <> Sun, 06 Jul 2014 18:28:08 -0400 propellor (0.7.0) unstable; urgency=medium * combineProperties no longer stops when a property fails; now it continues trying to satisfy all properties on the list before propigating the failure. * Attr is renamed to Info. (API change) * Renamed wrapper to propellor to make cabal installation of propellor work. * When git gpg signature of a fetched git branch cannot be verified, propellor will now continue running, but without merging in that branch. -- Joey Hess <> Fri, 13 Jun 2014 10:06:40 -0400 propellor (0.6.0) unstable; urgency=medium * Docker containers now propagate DNS attributes out to the host they're docked in. So if a docker container sets a DNS alias, every container it's docked in will automatically be added to a DNS round-robin, when propellor is used to manage DNS for the domain. * Apt.stdSourcesList no longer needs a suite to be specified. (API change) * Added --dump to dump out a field of a host's privdata. Useful for editing it. * Propellor's output now includes the hostname being provisioned, or when provisioning a docker container, the container name. -- Joey Hess <> Thu, 05 Jun 2014 17:32:14 -0400 propellor (0.5.3) unstable; urgency=medium * Fix unattended-upgrades config for !stable. * Ensure that kernel hostname is same as /etc/hostname when configuring hostname. * Added modules for some hosting providers (DigitalOcean, CloudAtCost). -- Joey Hess <> Thu, 29 May 2014 14:29:53 -0400 propellor (0.5.2) unstable; urgency=medium * A bug that caused propellor to hang when updating a running docker container appears to have been fixed. Note that since it affects the propellor process that serves as "init" of docker containers, they have to be restarted for the fix to take effect. * Licence changed from GPL to BSD. * A few changes to allow building Propellor on OSX. One user reports successfully using it there. -- Joey Hess <> Sat, 17 May 2014 16:42:55 -0400 propellor (0.5.1) unstable; urgency=medium * Primary DNS servers now have allow-transfer automatically populated with the IP addresses of secondary dns servers. So, it's important that all secondary DNS servers have an ipv4 (and/or ipv6) property configured. * Deal with old ssh connection caching sockets. * Add missing build deps and deps. Closes: #745459 -- Joey Hess <> Thu, 24 Apr 2014 18:09:58 -0400 propellor (0.5.0) unstable; urgency=medium * Removed root domain records from SOA. Instead, use RootDomain when calling Dns.primary. (API change) * Dns primary and secondary properties are now revertable. * When unattendedUpgrades is enabled on an Unstable or Testing system, configure it to allow the upgrades. * New website, -- Joey Hess <> Sat, 19 Apr 2014 17:38:02 -0400 propellor (0.4.0) unstable; urgency=medium * Propellor can configure primary DNS servers, including generating zone files, which is done by looking at the properties of hosts in a domain. * The `cname` property was renamed to `alias` as it does not always generate CNAME in the DNS. (API change) * Constructor of Property has changed (use `property` function instead). (API change) * All Property combinators now combine together their Attr settings. So Attr settings can be made inside a propertyList, for example. * Run all cron jobs under chronic from moreutils to avoid unnecessary mails. -- Joey Hess <> Sat, 19 Apr 2014 02:09:56 -0400 propellor (0.3.1) unstable; urgency=medium * Merge scheduler bug fix from git-annex. * Support for provisioning hosts with ssh and gpg keys. * Obnam support. * Apache support. * Postfix satellite system support. * Properties can now be satisfied differently on different operating systems. * Standard apt configuration for stable now includes backports. * Cron jobs generated by propellor use flock(1) to avoid multiple instances running at a time. * Add support for SSH ed25519 keys. (Thanks, Franz Pletz.) -- Joey Hess <> Thu, 17 Apr 2014 20:07:33 -0400 propellor (0.3.0) unstable; urgency=medium * ipv6to4: Ensure interface is brought up automatically on boot. * Enabling unattended upgrades now ensures that cron is installed and running to perform them. * Properties can be scheduled to only be checked after a given time period. * Fix bootstrapping of dependencies. * Fix compilation on Debian stable. * Include security updates in sources.list for stable and testing. * Use ssh connection caching, especially when bootstrapping. * Properties now run in a Propellor monad, which provides access to attributes of the host. (API change) -- Joey Hess <> Fri, 11 Apr 2014 01:19:05 -0400 propellor (0.2.3) unstable; urgency=medium * docker: Fix laziness bug that caused running containers to be unnecessarily stopped and committed. * Add locking so only one propellor can run at a time on a host. * docker: When running as effective init inside container, wait on zombies. * docker: Added support for configuring shared volumes and linked containers. -- Joey Hess <> Tue, 08 Apr 2014 02:07:37 -0400 propellor (0.2.2) unstable; urgency=medium * Now supports provisioning docker containers with architecture/libraries that do not match the host. * Fixed a bug that caused file modes to be set to 600 when propellor modified the file (did not affect newly created files). -- Joey Hess <> Fri, 04 Apr 2014 01:07:32 -0400 propellor (0.2.1) unstable; urgency=medium * First release with Debian package. -- Joey Hess <> Thu, 03 Apr 2014 01:43:14 -0400 propellor (0.2.0) unstable; urgency=low * Added support for provisioning Docker containers. * Bootstrap deployment now pushes the git repo to the remote host over ssh, securely. * propellor --add-key configures a gpg key, and makes propellor refuse to pull commits from git repositories not signed with that key. This allows propellor to be securely used with public, non-encrypted git repositories without the possibility of MITM. * Added support for type-safe reversions. Only some properties can be reverted; the type checker will tell you if you try something that won't work. * New syntactic sugar for building a list of properties, including revertable properties. -- Joey Hess <> Wed, 02 Apr 2014 13:57:42 -0400