shake-0.5: Build system library, like Make, but more accurate dependencies.

Safe HaskellNone




This module is used for defining Shake build systems. As a simple example of a Shake build system, let us build the file result.tar from the files listed by result.txt:

import Development.Shake
import Development.Shake.FilePath

main = shake shakeOptions $ do
    want ["result.tar"]
    "*.tar" *> \out -> do
        contents <- readFileLines $ replaceExtension out "txt"
        need contents
        system' "tar" $ ["-cf",out] ++ contents

We start by importing the modules defining both Shake and routines for manipulating FilePath values. We define main to call shake with the default shakeOptions. As the second argument to shake, we provide a set of rules. There are two common forms of rules, want to specify target files, and *> to define a rule which builds a FilePattern. We use want to require that after the build completes the file result.tar should be ready.

The *.tar rule describes how to build files with the extension .tar, including result.tar. We readFileLines on result.txt, after changing the .tar extension to .txt. We read each line into the variable contents -- being a list of the files that should go into result.tar. Next, we depend (need) all the files in contents. If any of these files change, the rule will be repeated. Finally we call the tar program. If either result.txt changes, or any of the files listed by result.txt change, then result.tar will be rebuilt.

When writing a Shake build system, start by defining what you want, then write rules with *> to produce the results. Before calling system' you should ensure that any files the command requires are demanded with calls to need. We offer the following advice to Shake users:

  • If ghc --make or cabal is capable of building your project, use that instead. Custom build systems are necessary for many complex projects, but many projects are not complex.
  • The CmdArgs package ( is well suited to providing command line parsing for build systems, often using flags to set fields in shakeOptions.
  • Put all result files in a distinguished directory, for example _make. You can implement a clean command by removing that directory, using removeDirectoryRecursive.
  • To obtain parallel builds set shakeThreads to a number greater than 1. You may also need to compile with -threaded.
  • Often the want commands will be determined by command line arguments, to mirror the behaviour of make targets. For a default set of want commands that you later override, withoutActions can be useful.
  • Lots of compilers produce .o files. To avoid overlapping rules, use .c.o for C compilers, .hs.o for Haskell compilers etc.
  • Do not be afraid to mix Shake rules, system commands and other Haskell libraries -- use each for what it does best.
  • The more accurate the dependencies are, the better. Use additional rules like doesFileExist and getDirectoryFiles to track information other than just the contents of files. For information in the environment that you suspect will change regularly (perhaps ghc version number), either write the information to a file with alwaysRerun and writeFileChanged, or use addOracle.

The theory behind Shake is described in an ICFP 2012 paper, Shake Before Building -- Replacing Make with Haskell The associated talk forms a short overview of Shake

Acknowledgements: Thanks to Austin Seipp for properly integrating the profiling code.



shake :: ShakeOptions -> Rules () -> IO ()Source

Main entry point for running Shake build systems. For an example see the top of the module Development.Shake. Use ShakeOptions to specify how the system runs, and Rules to specify what to build.

Core of Shake

data ShakeOptions Source

Options to control the execution of Shake, usually specified by overriding fields in shakeOptions:

 shakeOptions{shakeThreads=4, shakeReport=Just "report.html"}

The Data instance for this type reports the shakeProgress field as having the abstract type ShakeProgress, because Data cannot be defined for functions.




shakeFiles :: FilePath

Defaults to .shake. The prefix of the filename used for storing Shake metadata files. All metadata files will be named shakeFiles.extension, for some extension.

shakeThreads :: Int

Defaults to 1. Maximum number of rules to run in parallel, similar to make --jobs=N. To enable parallelism you may need to compile with -threaded. For many build systems, a number equal to or slightly less than the number of physical processors works well.

shakeVersion :: Int

Defaults to 1. The version number of your build rules. Increment the version number to force a complete rebuild, such as when making significant changes to the rules that require a wipe. The version number should be set in the source code, and not passed on the command line.

shakeVerbosity :: Verbosity

Defaults to Normal. What level of messages should be printed out.

shakeStaunch :: Bool

Defaults to False. Operate in staunch mode, where building continues even after errors, similar to make --keep-going.

shakeReport :: Maybe FilePath

Defaults to Nothing. Write an HTML profiling report to a file, showing which rules rebuilt, why, and how much time they took. Useful for improving the speed of your build systems.

shakeLint :: Bool

Defaults to False. Perform basic sanity checks after building, checking files have not been modified several times during the build. These sanity checks fail to catch most interesting errors.

shakeDeterministic :: Bool

Defaults to False. Run rules in a deterministic order, as far as possible. Typically used in conjunction with shakeThreads=1 for reproducing a build. If this field is set to False, Shake will run rules in a random order, which typically decreases contention for resources and speeds up the build.

shakeFlush :: Maybe Double

Defaults to Just 10. How often to flush Shake metadata files in seconds, or Nothing to never flush explicitly. It is possible that on abnormal termination (not Haskell exceptions) any rules that completed in the last shakeFlush seconds will be lost.

shakeAssume :: Maybe Assume

Defaults to Nothing. Assume all build objects are clean/dirty, see Assume for details. Can be used to implement make --touch.

shakeProgress :: IO Progress -> IO ()

Defaults to no action. A function called when the build starts, allowing progress to be reported, see Progress for details.

data Assume Source

The current assumptions made by the build system, used by shakeAssume. These options allow the end user to specify that any rules run are either to be treated as clean, or as dirty, regardless of what the build system thinks.

These assumptions only operate on files reached by the current action commands. Any other files in the database are left unchanged.



Assume that all rules reached are dirty and require rebuilding, equivalent to storedValue always returning Nothing. Useful to undo the results of AssumeClean, for benchmarking rebuild speed and for rebuilding if untracked dependencies have changed. This assumption is safe, but may cause more rebuilding than necessary.


This assumption is unsafe, and may lead to incorrect build results. Assume that all rules reached are clean and do not require rebuilding, provided the rule has a storedValue and has been built before. Useful if you have modified a file in some inconsequential way, such as only the comments or whitespace, and wish to avoid a rebuild.

data Progress Source

Information about the current state of the build, obtained by passing a callback function to shakeProgress. Typically a program will poll this value to provide progress messages. The following example displays the approximate single-threaded time remaining as the console title.

showProgress :: IO Progress -> IO ()
showProgress progress = void $ forkIO loop
    where loop = do
        current <- progress
        when (isRunning current) $ do
            let (s,c) = timeTodo current
            setTitle $ "Todo = " ++ show (ceiling s) ++ "s (+ " ++ show c ++ " unknown)"
            threadDelay $ 5 * 1000000

setTitle :: String -> IO ()
setTitle s = putStr $ "\ESC]0;" ++ s ++ "\BEL"




isRunning :: !Bool

Starts out True, becomes False once the build has completed.

countSkipped :: !Int

Number of rules which were required, but were already in a valid state.

countBuilt :: !Int

Number of rules which were have been built in this run.

countUnknown :: !Int

Number of rules which have been built previously, but are not yet known to be required.

countTodo :: !Int

Number of rules which are currently required (ignoring dependencies that do not change), but not built.

timeSkipped :: !Double

Time spent building countSkipped rules in previous runs.

timeBuilt :: !Double

Time spent building countBuilt rules.

timeUnknown :: !Double

Time spent building countUnknown rules in previous runs.

timeTodo :: !(Double, Int)

Time spent building countTodo rules in previous runs, plus the number which have no known time (have never been built before).

type ShakeValue a = (Show a, Typeable a, Eq a, Hashable a, Binary a, NFData a)Source

Define an alias for the six type classes required for things involved in Shake Rules. This alias is only available in GHC 7.4 and above, and requires the ConstraintKinds extension.

To define your own values meeting the necessary constraints it is convenient to use the extensions GeneralizedNewtypeDeriving and DeriveDataTypeable to write:

 newtype MyType = MyType (String, Bool) deriving (Show,Typeable,Eq,Hashable,Binary,NFData)

class (ShakeValue key, ShakeValue value) => Rule key value | key -> value whereSource

Define a pair of types that can be used by Shake rules. To import all the type classes required see Development.Shake.Classes.


storedValue :: key -> IO (Maybe value)Source

Retrieve the value associated with a key, if available.

As an example for filenames/timestamps, if the file exists you should return Just the timestamp, but otherwise return Nothing. For rules whose values are not stored externally, storedValue should return Nothing.


Rule GetDirectoryQ GetDirectoryA 
Rule DoesFileExistQ DoesFileExistA 
Rule FileQ FileA 
Rule AlwaysRerunQ AlwaysRerunA 
Rule FilesQ FilesA 
(ShakeValue (OracleQ q), ShakeValue (OracleA a), ShakeValue q, ShakeValue a) => Rule (OracleQ q) (OracleA a) 

data Rules a Source

Define a set of rules. Rules can be created with calls to rule, defaultRule or action. Rules are combined with either the Monoid instance, or (more commonly) the Monad instance and do notation.


defaultRule :: Rule key value => (key -> Maybe (Action value)) -> Rules ()Source

Like rule, but lower priority, if no rule exists then defaultRule is checked. All default rules must be disjoint.

rule :: Rule key value => (key -> Maybe (Action value)) -> Rules ()Source

Add a rule to build a key, returning an appropriate Action. All rules must be disjoint. To define lower priority rules use defaultRule.

action :: Action a -> Rules ()Source

Run an action, usually used for specifying top-level requirements.

withoutActions :: Rules () -> Rules ()Source

Remove all actions specified in a set of rules, usually used for implementing command line specification of what to build.

data Action a Source

The Action monad, use liftIO to raise IO actions into it, and need to execute files. Action values are used by rule and action.

apply :: Rule key value => [key] -> Action [value]Source

Execute a rule, returning the associated values. If possible, the rules will be run in parallel. This function requires that appropriate rules have been added with rule or defaultRule.

apply1 :: Rule key value => key -> Action valueSource

Apply a single rule, equivalent to calling apply with a singleton list. Where possible, use apply to allow parallelism.

traced :: String -> IO a -> Action aSource

Write an action to the trace list, along with the start/end time of running the IO action. The system' command automatically calls traced. The trace list is used for profile reports (see shakeReport).

data Verbosity Source

The verbosity data type, used by shakeVerbosity.



Don't print any messages.


Only print essential messages (typically errors).


Print normal messages (typically errors and warnings).


Print lots of messages (typically errors, warnings and status updates).


Print messages for virtually everything (for debugging a build system).

getVerbosity :: Action VerbositySource

Get the current verbosity level, as set by shakeVerbosity. If you want to output information to the console, you are recommended to use putLoud / putNormal / putQuiet, which ensures multiple messages are not interleaved.

putLoud :: String -> Action ()Source

Write a message to the output when the verbosity (shakeVerbosity) is appropriate. The output will not be interleaved with any other Shake messages (other than those generated by system commands).

putNormal :: String -> Action ()Source

Write a message to the output when the verbosity (shakeVerbosity) is appropriate. The output will not be interleaved with any other Shake messages (other than those generated by system commands).

putQuiet :: String -> Action ()Source

Write a message to the output when the verbosity (shakeVerbosity) is appropriate. The output will not be interleaved with any other Shake messages (other than those generated by system commands).

liftIO :: MonadIO m => forall a. IO a -> m a

Lift a computation from the IO monad.

Utility functions

system' :: FilePath -> [String] -> Action ()Source

Execute a system command. This function will raise an error if the exit code is non-zero. Before running system' make sure you need any required files.

systemCwd :: FilePath -> FilePath -> [String] -> Action ()Source

Execute a system command with a specified current working directory (first argument). This function will raise an error if the exit code is non-zero. Before running systemCwd make sure you need any required files.

 systemCwd "/usr/MyDirectory" "pwd" []

systemOutput :: FilePath -> [String] -> Action (String, String)Source

Execute a system command, returning (stdout,stderr). This function will raise an error if the exit code is non-zero. Before running systemOutput make sure you need any required files.

copyFile' :: FilePath -> FilePath -> Action ()Source

copyFile old new copies the existing file from old to new. The old file is has need called on it before copying the file.

readFile' :: FilePath -> Action StringSource

Read a file, after calling need.

writeFile' :: FilePath -> String -> Action ()Source

Write a file, lifted to the Action monad.

readFileLines :: FilePath -> Action [String]Source

A version of readFile' which also splits the result into lines.

writeFileLines :: FilePath -> [String] -> Action ()Source

A version of writeFile' which writes out a list of lines.

writeFileChanged :: FilePath -> String -> Action ()Source

Write a file, but only if the contents would change.

File rules

need :: [FilePath] -> Action ()Source

Require that the following files are built before continuing. Particularly necessary when calling system'. As an example:

 "*.rot13" *> \out -> do
     let src = dropExtension out
     need [src]
     system' ["rot13",src,"-o",out]

want :: [FilePath] -> Rules ()Source

Require that the following are built by the rules, used to specify the target.

 main = shake shakeOptions $ do
    want ["Main.exe"]

This program will build Main.exe, given sufficient rules.

(*>) :: FilePattern -> (FilePath -> Action ()) -> Rules ()Source

Define a rule that matches a FilePattern. No file required by the system must be matched by more than one pattern. For the pattern rules, see ?==.

 "*.asm.o" *> \out -> do
     let src = dropExtension out
     need [src]
     system' ["as",src,"-o",out]

To define a build system for multiple compiled languages, we recommend using .asm.o, .cpp.o, .hs.o, to indicate which language produces an object file. I.e., the file foo.cpp produces object file foo.cpp.o.

Note that matching is case-sensitive, even on Windows.

(**>) :: [FilePattern] -> (FilePath -> Action ()) -> Rules ()Source

Define a set of patterns, and if any of them match, run the associated rule. See *>.

(?>) :: (FilePath -> Bool) -> (FilePath -> Action ()) -> Rules ()Source

Define a rule to build files. If the first argument returns True for a given file, the second argument will be used to build it. Usually *> is sufficient, but ?> gives additional power. For any file used by the build system, only one rule should return True.

 (all isUpper . takeBaseName) ?> \out -> do
     let src = replaceBaseName out $ map toLower $ takeBaseName out
     writeFile' . map toUpper =<< readFile' src

(?>>) :: (FilePath -> Maybe [FilePath]) -> ([FilePath] -> Action ()) -> Rules ()Source

Define a rule for building multiple files at the same time, a more powerful and more dangerous version of *>>.

Given an application test ?>> ..., test should return Just if the rule applies, and should return the list of files that will be produced. This list must include the file passed as an argument and should obey the invariant:

test x == Just ys ==> x `elem` ys && all ((== Just ys) . test) ys

As an example of a function satisfying the invariaint:

test x | takeExtension x `elem` [".hi",".o"]
        = Just [dropExtension x <.> "hi", dropExtension x <.> "o"]
test _ = Nothing

Regardless of whether Foo.hi or Foo.o is passed, the function always returns [Foo.hi, Foo.o].

(*>>) :: [FilePattern] -> ([FilePath] -> Action ()) -> Rules ()Source

Define a rule for building multiple files at the same time. As an example, a single invokation of GHC produces both .hi and .o files:

 ["*.o","*.hi"] *>> \[o,hi] -> do
     let hs = replaceExtension o "hs"
     need ... -- all files the .hs import
     system' "ghc" ["-c",hs]

However, in practice, it's usually easier to define rules with *> and make the .hi depend on the .o. When defining rules that build multiple files, all the FilePattern values must have the same sequence of // and * wildcards in the same order.

type FilePattern = StringSource

A type synonym for file patterns, containing // and *. For the syntax and semantics of FilePattern see ?==.

(?==) :: FilePattern -> FilePath -> BoolSource

Match a FilePattern against a FilePath, There are only two special forms:

  • * matches an entire path component, excluding any separators.
  • // matches an arbitrary number of path components.

Some examples that match:

 "*.c" ?== "foo/bar/baz.c"
 "*.c" ?== "baz.c"
 "*.c" ?== "baz.c"
 "test.c" ?== "test.c"

Examples that don't match:

 "*.c" ?== "foo/bar.c"
 "*/*.c" ?== "foo/bar/baz.c"

An example that only matches on Windows:

 "foo/bar" ?== "foo\\bar"

Directory rules

doesFileExist :: FilePath -> Action BoolSource

Returns True if the file exists.

getDirectoryContents :: FilePath -> Action [FilePath]Source

Get the contents of a directory. The result will be sorted, and will not contain the files . or .. (unlike the standard Haskell version). It is usually better to call either getDirectoryFiles or getDirectoryDirs. The resulting paths will be relative to the first argument.

getDirectoryFiles :: FilePath -> FilePattern -> Action [FilePath]Source

Get the files in a directory that match a particular pattern. For the interpretation of the pattern see ?==.

getDirectoryDirs :: FilePath -> Action [FilePath]Source

Get the directories contained by a directory, does not include . or ...

Additional rules

addOracle :: (ShakeValue q, ShakeValue a) => (q -> Action a) -> Rules ()Source

Add extra information which your build should depend on. For example:

 newtype GhcVersion = GhcVersion () deriving (Show,Typeable,Eq,Hashable,Binary,NFData)
 addOracle $ GhcVersion -> return "7.2.1"

If a rule depends on the GHC version, it can then use askOracle GhcVersion, and if the GHC version changes, the rule will rebuild. We use a newtype around () to allow the use of GeneralizedNewtypeDeriving. It is common for the value returned by askOracle to be ignored, in which case askOracleWith may help avoid ambiguous type messages -- although a wrapper function with an explicit type is encouraged. To import all the type classes required see Development.Shake.Classes.

We require that each type of question map to exactly one type of answer, otherwise a runtime error will be raised.

Actions passed to addOracle will be run in every build they are required, but if their value does not change they will not invalidate any rules depending on them. To get a similar behaviour using files, see alwaysRerun.

As an example, consider tracking package versions installed with GHC:

newtype GhcPkgList = GhcPkgList () deriving (Show,Typeable,Eq,Hashable,Binary,NFData)
newtype GhcPkgVersion = GhcPkgVersion String deriving (Show,Typeable,Eq,Hashable,Binary,NFData)

    addOracle $ \GhcPkgList{} -> do
        (out,_) <- systemOutput "ghc-pkg" ["list","--simple-output"]
        return [(reverse b, reverse a) | x <- words out, let (a,_:b) = break (== '-') $ reverse x]
    let getPkgList = askOracleWith (GhcPkgList ()) [("","")] 
    addOracle $ \(GhcPkgVersion pkg) -> do
        pkgs <- getPkgList
        return $ lookup pkg pkgs
    let getPkgVersion pkg = askOracleWith (GhcPkgVersion pkg) (Just "")

Using these definitions, any rule depending on the version of shake should call getPkgVersion shake to rebuild when shake is upgraded.

askOracle :: (ShakeValue q, ShakeValue a) => q -> Action aSource

Get information previously added with addOracle, the question/answer types must match those provided to addOracle.

askOracleWith :: (ShakeValue q, ShakeValue a) => q -> a -> Action aSource

Get information previously added with addOracle. The second argument is unused, but can be useful to avoid ambiguous type error messages.

alwaysRerun :: Action ()Source

Always rerun the associated action. Useful for defining rules that query the environment. For example:

 "ghcVersion.txt" *> \out -> do
     (stdout,_) <- systemOutput "ghc" ["--version"]
     writeFileChanged out stdout

Finite resources

data Resource Source

The type representing a finite resource, which multiple build actions should respect. Created with newResource in the IO monad before calling shake, and used with withResource in the Action monad when defining rules.

As an example, only one set of calls to the Excel API can occur at one time, therefore Excel is a finite resource of quantity 1. You can write:

 do excel <- newResource "Excel" 1
    shake shakeOptions{shakeThreads=2} $ do
        want ["a.xls","b.xls"]
        "*.xls" *> \out ->
            withResource excel 1 $
                system' "excel" [out,...]

Now the two calls to excel will not happen in parallel. Using Resource is better than MVar as it will not block any other threads from executing. Be careful that the actions run within withResource do not themselves require further quantities of this resource, or you may get a "thread blocked indefinitely in an MVar operation" exception. Typically only system commands (such as system') will be run inside withResource, not commands such as need.

As another example, calls to compilers are usually CPU bound but calls to linkers are usually disk bound. Running 8 linkers will often cause an 8 CPU system to grid to a halt. We can limit ourselves to 4 linkers with:

 do disk <- newResource "Disk" 4
    shake shakeOptions{shakeThreads=8} $ do
        want [show i <.> "exe" | i <- [1..100]]
        "*.exe" *> \out ->
            withResource disk 1 $
                system' "ld" ["-o",out,...]
        "*.o" *> \out ->
            system' "cl" ["-o",out,...]


newResource :: String -> Int -> IO ResourceSource

Create a new finite resource, given a name (for error messages) and a quantity of the resource that exists. For an example see Resource.

withResource :: Resource -> Int -> Action a -> Action aSource

Run an action which uses part of a finite resource. For an example see Resource.