{-# LANGUAGE CPP #-}

-- | Vty provides interfaces for both terminal input and terminal
-- output.
--
-- - Input to the terminal is provided to the Vty application as a
--   sequence of 'Event's.
--
-- - Output is provided to Vty by the application in the form of a
--   'Picture'. A 'Picture' is one or more layers of 'Image's.
--   'Image' values can be built by the various constructors in
--   "Graphics.Vty.Image". Output can be syled using 'Attr' (attribute)
--   values in the "Graphics.Vty.Attributes" module.
--
-- Vty uses threads internally, so programs made with Vty need to be
-- compiled with the threaded runtime using the GHC @-threaded@ option.
--
-- @
--  import "Graphics.Vty"
--
--  main = do
--      cfg <- 'standardIOConfig'
--      vty <- 'mkVty' cfg
--      let line0 = 'string' ('defAttr' ` 'withForeColor' ` 'green') \"first line\"
--          line1 = 'string' ('defAttr' ` 'withBackColor' ` 'blue') \"second line\"
--          img = line0 '<->' line1
--          pic = 'picForImage' img
--      'update' vty pic
--      e <- 'nextEvent' vty
--      'shutdown' vty
--      'print' (\"Last event was: \" '++' 'show' e)
-- @
module Graphics.Vty
  ( Vty(..)
  , mkVty
  , setWindowTitle
  , Mode(..)
  , module Graphics.Vty.Config
  , module Graphics.Vty.Input
  , module Graphics.Vty.Output
  , module Graphics.Vty.Output.Interface
  , module Graphics.Vty.Picture
  , module Graphics.Vty.Image
  , module Graphics.Vty.Attributes
  )
where

import Graphics.Vty.Config
import Graphics.Vty.Input
import Graphics.Vty.Output
import Graphics.Vty.Output.Interface
import Graphics.Vty.Picture
import Graphics.Vty.Image
import Graphics.Vty.Attributes
import Graphics.Vty.UnicodeWidthTable.IO
import Graphics.Vty.UnicodeWidthTable.Install

import Data.Char (isPrint, showLitChar)
import qualified Data.ByteString.Char8 as BS8

import qualified Control.Exception as E
import Control.Monad (when)
import Control.Concurrent.STM

import Data.IORef
#if !(MIN_VERSION_base(4,11,0))
import Data.Semigroup ((<>))
#endif

-- | A Vty value represents a handle to the Vty library that the
-- application must create in order to use Vty.
--
-- The use of Vty typically follows this process:
--
--    1. Initialize vty with 'mkVty' (this takes control of the terminal).
--
--    2. Use 'update' to display a picture.
--
--    3. Use 'nextEvent' to get the next input event.
--
--    4. Depending on the event, go to 2 or 5.
--
--    5. Shutdown vty and restore the terminal state with 'shutdown'. At
--    this point the 'Vty' handle cannot be used again.
--
-- Operations on Vty handles are not thread-safe.
data Vty =
    Vty { update :: Picture -> IO ()
        -- ^ Outputs the given 'Picture'.
        , nextEvent :: IO Event
        -- ^ Return the next 'Event' or block until one becomes
        -- available.
        , nextEventNonblocking :: IO (Maybe Event)
        -- ^ Non-blocking version of 'nextEvent'.
        , inputIface :: Input
        -- ^ The input interface. See 'Input'.
        , outputIface :: Output
        -- ^ The output interface. See 'Output'.
        , refresh :: IO ()
        -- ^ Refresh the display. If other programs output to the
        -- terminal and mess up the display then the application might
        -- want to force a refresh using this function.
        , shutdown :: IO ()
        -- ^ Clean up after vty. A call to this function is necessary to
        -- cleanly restore the terminal state before application exit.
        -- The above methods will throw an exception if executed after
        -- this is executed. Idempotent.
        , isShutdown :: IO Bool
        }

-- | Create a Vty handle. At most one handle should be created at a time
-- for a given terminal device.
--
-- The specified configuration is added to the the configuration
-- loaded by 'userConfig' with the 'userConfig' configuration taking
-- precedence. See "Graphics.Vty.Config".
--
-- For most applications @mkVty defaultConfig@ is sufficient.
mkVty :: Config -> IO Vty
mkVty appConfig = do
    config <- (<> appConfig) <$> userConfig

    when (allowCustomUnicodeWidthTables config /= Just False) $
        installCustomWidthTable config

    input <- inputForConfig config
    out <- outputForConfig config
    internalMkVty input out

installCustomWidthTable :: Config -> IO ()
installCustomWidthTable c = do
    let doLog s = case debugLog c of
            Nothing -> return ()
            Just path -> appendFile path $ "installWidthTable: " <> s <> "\n"

    customInstalled <- isCustomTableReady
    when (not customInstalled) $ do
        mTerm <- currentTerminalName
        case mTerm of
            Nothing ->
                doLog "No current terminal name available"
            Just currentTerm ->
                case lookup currentTerm (termWidthMaps c) of
                    Nothing ->
                        doLog "Current terminal not found in custom character width mapping list"
                    Just path -> do
                        tableResult <- E.try $ readUnicodeWidthTable path
                        case tableResult of
                            Left (e::E.SomeException) ->
                                doLog $ "Error reading custom character width table " <>
                                        "at " <> show path <> ": " <> show e
                            Right (Left msg) ->
                                doLog $ "Error reading custom character width table " <>
                                        "at " <> show path <> ": " <> msg
                            Right (Right table) -> do
                                installResult <- E.try $ installUnicodeWidthTable table
                                case installResult of
                                    Left (e::E.SomeException) ->
                                        doLog $ "Error installing unicode table (" <>
                                                show path <> ": " <> show e
                                    Right () ->
                                        doLog $ "Successfully installed Unicode width table " <>
                                                " from " <> show path

internalMkVty :: Input -> Output -> IO Vty
internalMkVty input out = do
    reserveDisplay out

    shutdownVar <- newTVarIO False
    let shutdownIo = do
            alreadyShutdown <- atomically $ swapTVar shutdownVar True
            when (not alreadyShutdown) $ do
                shutdownInput input
                releaseDisplay out
                releaseTerminal out

    let shutdownStatus = readTVarIO shutdownVar

    lastPicRef <- newIORef Nothing
    lastUpdateRef <- newIORef Nothing

    let innerUpdate inPic = do
            b <- displayBounds out
            mlastUpdate <- readIORef lastUpdateRef
            updateData <- case mlastUpdate of
                Nothing -> do
                    dc <- displayContext out b
                    outputPicture dc inPic
                    return (b, dc)
                Just (lastBounds, lastContext) -> do
                    if b /= lastBounds
                        then do
                            dc <- displayContext out b
                            outputPicture dc inPic
                            return (b, dc)
                        else do
                            outputPicture lastContext inPic
                            return (b, lastContext)
            writeIORef lastUpdateRef $ Just updateData
            writeIORef lastPicRef $ Just inPic

    let innerRefresh = do
            writeIORef lastUpdateRef Nothing
            bounds <- displayBounds out
            dc <- displayContext out bounds
            writeIORef (assumedStateRef $ contextDevice dc) initialAssumedState
            mPic <- readIORef lastPicRef
            maybe (return ()) innerUpdate mPic

    let mkResize = uncurry EvResize <$> displayBounds out
        gkey = do
            k <- atomically $ readTChan $ _eventChannel input
            case k of
                (EvResize _ _)  -> mkResize
                _ -> return k
        gkey' = do
            k <- atomically $ tryReadTChan $ _eventChannel input
            case k of
                (Just (EvResize _ _))  -> Just <$> mkResize
                _ -> return k

    return $ Vty { update = innerUpdate
                 , nextEvent = gkey
                 , nextEventNonblocking = gkey'
                 , inputIface = input
                 , outputIface = out
                 , refresh = innerRefresh
                 , shutdown = shutdownIo
                 , isShutdown = shutdownStatus
                 }

-- | Set the terminal window title string.
--
-- This function emits an Xterm-compatible escape sequence that we
-- anticipate will work for essentially all modern terminal emulators.
-- Ideally we'd use a terminal capability for this, but there does not
-- seem to exist a termcap for setting window titles. If you find that
-- this function does not work for a given terminal emulator, please
-- report the issue.
--
-- For details, see:
--
-- https://tldp.org/HOWTO/Xterm-Title-3.html
setWindowTitle :: Vty -> String -> IO ()
setWindowTitle vty title = do
    let sanitize :: String -> String
        sanitize = concatMap sanitizeChar
        sanitizeChar c | not (isPrint c) = showLitChar c ""
                       | otherwise = [c]
    let buf = BS8.pack $ "\ESC]2;" <> sanitize title <> "\007"
    outputByteBuffer (outputIface vty) buf