{-# LINE 1 "Codec/Compression/Zlib/Stream.hsc" #-}
{-# LANGUAGE CPP, ForeignFunctionInterface, DeriveDataTypeable #-}
{-# LINE 2 "Codec/Compression/Zlib/Stream.hsc" #-}

{-# LINE 3 "Codec/Compression/Zlib/Stream.hsc" #-}
{-# LANGUAGE DeriveGeneric #-}

{-# LINE 5 "Codec/Compression/Zlib/Stream.hsc" #-}
-----------------------------------------------------------------------------
-- |
-- Copyright   :  (c) 2006-2015 Duncan Coutts
-- License     :  BSD-style
--
-- Maintainer  :  duncan@community.haskell.org
--
-- Zlib wrapper layer
--
-----------------------------------------------------------------------------
module Codec.Compression.Zlib.Stream (

  -- * The Zlib state monad
  Stream,
  State,
  mkState,
  runStream,
  unsafeLiftIO,
  finalise,

  -- * Initialisation
  deflateInit, 
  inflateInit,

  -- ** Initialisation parameters
  Format(..),
    gzipFormat,
    zlibFormat,
    rawFormat,
    gzipOrZlibFormat,
    formatSupportsDictionary,
  CompressionLevel(..),
    defaultCompression,
    noCompression,
    bestSpeed,
    bestCompression,
    compressionLevel,
  Method(..),
    deflateMethod,
  WindowBits(..),
    defaultWindowBits,
    windowBits,
  MemoryLevel(..),
    defaultMemoryLevel,
    minMemoryLevel,
    maxMemoryLevel,
    memoryLevel,
  CompressionStrategy(..),
    defaultStrategy,
    filteredStrategy,
    huffmanOnlyStrategy,

  -- * The buisness
  deflate,
  inflate,
  Status(..),
  Flush(..),
  ErrorCode(..),
  -- ** Special operations
  inflateReset,

  -- * Buffer management
  -- ** Input buffer
  pushInputBuffer,
  inputBufferEmpty,
  popRemainingInputBuffer,

  -- ** Output buffer
  pushOutputBuffer,
  popOutputBuffer,
  outputBufferBytesAvailable,
  outputBufferSpaceRemaining,
  outputBufferFull,

  -- ** Dictionary
  deflateSetDictionary,
  inflateSetDictionary,

  -- ** Dictionary hashes
  DictionaryHash,
  dictionaryHash,
  zeroDictionaryHash,


{-# LINE 94 "Codec/Compression/Zlib/Stream.hsc" #-}

  ) where

-- Note we don't use the MIN_VERSION_* macros here for compatability with
-- old Cabal versions that come with old GHC, that didn't provide these
-- macros for .hsc files. So we use __GLASGOW_HASKELL__ as a proxy.

import Foreign
         ( Word8, Ptr, nullPtr, plusPtr, peekByteOff, pokeByteOff
         , ForeignPtr, FinalizerPtr, mallocForeignPtrBytes, addForeignPtrFinalizer
         , withForeignPtr, touchForeignPtr, minusPtr )

{-# LINE 106 "Codec/Compression/Zlib/Stream.hsc" #-}
import Foreign.ForeignPtr.Unsafe ( unsafeForeignPtrToPtr )
import System.IO.Unsafe          ( unsafePerformIO )

{-# LINE 111 "Codec/Compression/Zlib/Stream.hsc" #-}

{-# LINE 112 "Codec/Compression/Zlib/Stream.hsc" #-}
import Foreign
         ( finalizeForeignPtr )

{-# LINE 115 "Codec/Compression/Zlib/Stream.hsc" #-}
import Foreign.C
import Data.ByteString.Internal (nullForeignPtr)
import qualified Data.ByteString.Unsafe as B
import Data.ByteString (ByteString)

{-# LINE 122 "Codec/Compression/Zlib/Stream.hsc" #-}
import Control.Monad (ap,liftM)

{-# LINE 124 "Codec/Compression/Zlib/Stream.hsc" #-}

{-# LINE 125 "Codec/Compression/Zlib/Stream.hsc" #-}
import Control.Monad.ST.Strict

{-# LINE 129 "Codec/Compression/Zlib/Stream.hsc" #-}
import Control.Monad.ST.Unsafe

{-# LINE 133 "Codec/Compression/Zlib/Stream.hsc" #-}
import Control.Exception (assert)
import Data.Typeable (Typeable)

{-# LINE 136 "Codec/Compression/Zlib/Stream.hsc" #-}
import GHC.Generics (Generic)

{-# LINE 138 "Codec/Compression/Zlib/Stream.hsc" #-}

{-# LINE 141 "Codec/Compression/Zlib/Stream.hsc" #-}

import Prelude hiding (length)


{-# LINE 145 "Codec/Compression/Zlib/Stream.hsc" #-}


pushInputBuffer :: ForeignPtr Word8 -> Int -> Int -> Stream ()
pushInputBuffer inBuf' offset length = do

  -- must not push a new input buffer if the last one is not used up
  inAvail <- getInAvail
  assert (inAvail == 0) $ return ()

  -- Now that we're setting a new input buffer, we can be sure that zlib no
  -- longer has a reference to the old one. Therefore this is the last point
  -- at which the old buffer had to be retained. It's safe to release now.
  inBuf <- getInBuf 
  unsafeLiftIO $ touchForeignPtr inBuf    

  -- now set the available input buffer ptr and length
  setInBuf   inBuf'
  setInAvail length
  setInNext  (unsafeForeignPtrToPtr inBuf' `plusPtr` offset)
  -- Note the 'unsafe'. We are passing the raw ptr inside inBuf' to zlib.
  -- To make this safe we need to hold on to the ForeignPtr for at least as
  -- long as zlib is using the underlying raw ptr.


inputBufferEmpty :: Stream Bool
inputBufferEmpty = getInAvail >>= return . (==0)


popRemainingInputBuffer :: Stream (ForeignPtr Word8, Int, Int)
popRemainingInputBuffer = do

  inBuf    <- getInBuf
  inNext   <- getInNext
  inAvail  <- getInAvail

  -- there really should be something to pop, otherwise it's silly
  assert (inAvail > 0) $ return ()
  setInAvail 0

  return (inBuf, inNext `minusPtr` unsafeForeignPtrToPtr inBuf, inAvail)


pushOutputBuffer :: ForeignPtr Word8 -> Int -> Int -> Stream ()
pushOutputBuffer outBuf' offset length = do

  --must not push a new buffer if there is still data in the old one
  outAvail <- getOutAvail
  assert (outAvail == 0) $ return ()
  -- Note that there may still be free space in the output buffer, that's ok,
  -- you might not want to bother completely filling the output buffer say if
  -- there's only a few free bytes left.

  outBuf <- getOutBuf
  unsafeLiftIO $ touchForeignPtr outBuf

  -- now set the available input buffer ptr and length
  setOutBuf  outBuf'
  setOutFree length
  setOutNext (unsafeForeignPtrToPtr outBuf' `plusPtr` offset)

  setOutOffset offset
  setOutAvail  0


-- get that part of the output buffer that is currently full
-- (might be 0, use outputBufferBytesAvailable to check)
-- this may leave some space remaining in the buffer, use
-- outputBufferSpaceRemaining to check.
popOutputBuffer :: Stream (ForeignPtr Word8, Int, Int)
popOutputBuffer = do

  outBuf    <- getOutBuf
  outOffset <- getOutOffset
  outAvail  <- getOutAvail

  -- there really should be something to pop, otherwise it's silly
  assert (outAvail > 0) $ return ()

  setOutOffset (outOffset + outAvail)
  setOutAvail  0

  return (outBuf, outOffset, outAvail)


-- this is the number of bytes available in the output buffer
outputBufferBytesAvailable :: Stream Int
outputBufferBytesAvailable = getOutAvail


-- you needen't get all the output immediately, you can continue until
-- there is no more output space available, this tells you that amount
outputBufferSpaceRemaining :: Stream Int
outputBufferSpaceRemaining = getOutFree


-- you only need to supply a new buffer when there is no more output buffer
-- space remaining
outputBufferFull :: Stream Bool
outputBufferFull = liftM (==0) outputBufferSpaceRemaining


-- you can only run this when the output buffer is not empty
-- you can run it when the input buffer is empty but it doesn't do anything
-- after running deflate either the output buffer will be full
-- or the input buffer will be empty (or both)
deflate :: Flush -> Stream Status
deflate flush = do

  outFree <- getOutFree

  -- deflate needs free space in the output buffer
  assert (outFree > 0) $ return ()

  result <- deflate_ flush
  outFree' <- getOutFree
    
  -- number of bytes of extra output there is available as a result of
  -- the call to deflate:
  let outExtra = outFree - outFree'
  
  outAvail <- getOutAvail
  setOutAvail (outAvail + outExtra)
  return result


inflate :: Flush -> Stream Status
inflate flush = do

  outFree <- getOutFree

  -- inflate needs free space in the output buffer
  assert (outFree > 0) $ return ()

  result <- inflate_ flush
  outFree' <- getOutFree

  -- number of bytes of extra output there is available as a result of
  -- the call to inflate:
  let outExtra = outFree - outFree'

  outAvail <- getOutAvail
  setOutAvail (outAvail + outExtra)
  return result


inflateReset :: Stream ()
inflateReset = do

  outAvail <- getOutAvail
  inAvail  <- getInAvail
  -- At the point where this is used, all the output should have been consumed
  -- and any trailing input should be extracted and resupplied explicitly, not
  -- just left.
  assert (outAvail == 0 && inAvail == 0) $ return ()

  err <- withStreamState $ \zstream ->
    c_inflateReset zstream
  failIfError err



deflateSetDictionary :: ByteString -> Stream Status
deflateSetDictionary dict = do
  err <- withStreamState $ \zstream ->
           B.unsafeUseAsCStringLen dict $ \(ptr, len) ->
             c_deflateSetDictionary zstream ptr (fromIntegral len)
  toStatus err

inflateSetDictionary :: ByteString -> Stream Status
inflateSetDictionary dict = do
  err <- withStreamState $ \zstream -> do
           B.unsafeUseAsCStringLen dict $ \(ptr, len) ->
             c_inflateSetDictionary zstream ptr (fromIntegral len)
  toStatus err

-- | A hash of a custom compression dictionary. These hashes are used by
-- zlib as dictionary identifiers.
-- (The particular hash function used is Adler32.)
--
newtype DictionaryHash = DictHash CULong
  deriving (Eq, Ord, Read, Show)

-- | Update a running 'DictionaryHash'. You can generate a 'DictionaryHash'
-- from one or more 'ByteString's by starting from 'zeroDictionaryHash', e.g.
--
-- > dictionaryHash zeroDictionaryHash :: ByteString -> DictionaryHash
--
-- or
--
-- > foldl' dictionaryHash zeroDictionaryHash :: [ByteString] -> DictionaryHash
--
dictionaryHash :: DictionaryHash -> ByteString -> DictionaryHash
dictionaryHash (DictHash adler) dict =
  unsafePerformIO $
    B.unsafeUseAsCStringLen dict $ \(ptr, len) ->
      liftM DictHash $ c_adler32 adler ptr (fromIntegral len)

-- | A zero 'DictionaryHash' to use as the initial value with 'dictionaryHash'.
--
zeroDictionaryHash :: DictionaryHash
zeroDictionaryHash = DictHash 0

----------------------------
-- Stream monad
--

newtype Stream a = Z {
    unZ :: ForeignPtr StreamState
        -> ForeignPtr Word8
        -> ForeignPtr Word8
        -> Int -> Int
        -> IO (ForeignPtr Word8
              ,ForeignPtr Word8
              ,Int, Int, a)
  }

instance Functor Stream where
  fmap   = liftM

instance Applicative Stream where
  pure   = return
  (<*>)  = ap

instance Monad Stream where
  (>>=)  = thenZ
--  m >>= f = (m `thenZ` \a -> consistencyCheck `thenZ_` returnZ a) `thenZ` f
  (>>)   = thenZ_
  return = returnZ
  fail   = (finalise >>) . failZ

returnZ :: a -> Stream a
returnZ a = Z $ \_ inBuf outBuf outOffset outLength ->
                  return (inBuf, outBuf, outOffset, outLength, a)
{-# INLINE returnZ #-}

thenZ :: Stream a -> (a -> Stream b) -> Stream b
thenZ (Z m) f =
  Z $ \stream inBuf outBuf outOffset outLength ->
    m stream inBuf outBuf outOffset outLength >>=
      \(inBuf', outBuf', outOffset', outLength', a) ->
        unZ (f a) stream inBuf' outBuf' outOffset' outLength'
{-# INLINE thenZ #-}

thenZ_ :: Stream a -> Stream b -> Stream b
thenZ_ (Z m) f =
  Z $ \stream inBuf outBuf outOffset outLength ->
    m stream inBuf outBuf outOffset outLength >>=
      \(inBuf', outBuf', outOffset', outLength', _) ->
        unZ f stream inBuf' outBuf' outOffset' outLength'
{-# INLINE thenZ_ #-}

failZ :: String -> Stream a
failZ msg = Z (\_ _ _ _ _ -> fail ("Codec.Compression.Zlib: " ++ msg))

data State s = State !(ForeignPtr StreamState)
                     !(ForeignPtr Word8)
                     !(ForeignPtr Word8)
      {-# UNPACK #-} !Int
      {-# UNPACK #-} !Int

mkState :: ST s (State s)
mkState = unsafeIOToST $ do
  stream <- mallocForeignPtrBytes (112)
{-# LINE 408 "Codec/Compression/Zlib/Stream.hsc" #-}
  withForeignPtr stream $ \ptr -> do
    (\hsc_ptr -> pokeByteOff hsc_ptr 48)       ptr nullPtr
{-# LINE 410 "Codec/Compression/Zlib/Stream.hsc" #-}
    (\hsc_ptr -> pokeByteOff hsc_ptr 64)    ptr nullPtr
{-# LINE 411 "Codec/Compression/Zlib/Stream.hsc" #-}
    (\hsc_ptr -> pokeByteOff hsc_ptr 72)     ptr nullPtr
{-# LINE 412 "Codec/Compression/Zlib/Stream.hsc" #-}
    (\hsc_ptr -> pokeByteOff hsc_ptr 80)    ptr nullPtr
{-# LINE 413 "Codec/Compression/Zlib/Stream.hsc" #-}
    (\hsc_ptr -> pokeByteOff hsc_ptr 0)   ptr nullPtr
{-# LINE 414 "Codec/Compression/Zlib/Stream.hsc" #-}
    (\hsc_ptr -> pokeByteOff hsc_ptr 24)  ptr nullPtr
{-# LINE 415 "Codec/Compression/Zlib/Stream.hsc" #-}
    (\hsc_ptr -> pokeByteOff hsc_ptr 8)  ptr (0 :: CUInt)
{-# LINE 416 "Codec/Compression/Zlib/Stream.hsc" #-}
    (\hsc_ptr -> pokeByteOff hsc_ptr 32) ptr (0 :: CUInt)
{-# LINE 417 "Codec/Compression/Zlib/Stream.hsc" #-}
  return (State stream nullForeignPtr nullForeignPtr 0 0)

runStream :: Stream a -> State s -> ST s (a, State s)
runStream (Z m) (State stream inBuf outBuf outOffset outLength) =
  unsafeIOToST $
    m stream inBuf outBuf outOffset outLength >>=
      \(inBuf', outBuf', outOffset', outLength', a) ->
        return (a, State stream inBuf' outBuf' outOffset' outLength')

-- This is marked as unsafe because runStream uses unsafeIOToST so anything
-- lifted here can end up being unsafePerformIO'd.
unsafeLiftIO :: IO a -> Stream a
unsafeLiftIO m = Z $ \_stream inBuf outBuf outOffset outLength -> do
  a <- m
  return (inBuf, outBuf, outOffset, outLength, a)

getStreamState :: Stream (ForeignPtr StreamState)
getStreamState = Z $ \stream inBuf outBuf outOffset outLength -> do
  return (inBuf, outBuf, outOffset, outLength, stream)

getInBuf :: Stream (ForeignPtr Word8)
getInBuf = Z $ \_stream inBuf outBuf outOffset outLength -> do
  return (inBuf, outBuf, outOffset, outLength, inBuf)

getOutBuf :: Stream (ForeignPtr Word8)
getOutBuf = Z $ \_stream inBuf outBuf outOffset outLength -> do
  return (inBuf, outBuf, outOffset, outLength, outBuf)

getOutOffset :: Stream Int
getOutOffset = Z $ \_stream inBuf outBuf outOffset outLength -> do
  return (inBuf, outBuf, outOffset, outLength, outOffset)

getOutAvail :: Stream Int
getOutAvail = Z $ \_stream inBuf outBuf outOffset outLength -> do
  return (inBuf, outBuf, outOffset, outLength, outLength)

setInBuf :: ForeignPtr Word8 -> Stream ()
setInBuf inBuf = Z $ \_stream _ outBuf outOffset outLength -> do
  return (inBuf, outBuf, outOffset, outLength, ())

setOutBuf :: ForeignPtr Word8 -> Stream ()
setOutBuf outBuf = Z $ \_stream inBuf _ outOffset outLength -> do
  return (inBuf, outBuf, outOffset, outLength, ())

setOutOffset :: Int -> Stream ()
setOutOffset outOffset = Z $ \_stream inBuf outBuf _ outLength -> do
  return (inBuf, outBuf, outOffset, outLength, ())

setOutAvail :: Int -> Stream ()
setOutAvail outLength = Z $ \_stream inBuf outBuf outOffset _ -> do
  return (inBuf, outBuf, outOffset, outLength, ())

----------------------------
-- Debug stuff
--


{-# LINE 512 "Codec/Compression/Zlib/Stream.hsc" #-}


----------------------------
-- zlib wrapper layer
--

data Status =
    Ok
  | StreamEnd
  | Error ErrorCode String

data ErrorCode =
    NeedDict DictionaryHash
  | FileError
  | StreamError
  | DataError
  | MemoryError
  | BufferError -- ^ No progress was possible or there was not enough room in
                --   the output buffer when 'Finish' is used. Note that
                --   'BuferError' is not fatal, and 'inflate' can be called
                --   again with more input and more output space to continue.
  | VersionError
  | Unexpected

toStatus :: CInt -> Stream Status
toStatus errno = case errno of
  (0)            -> return Ok
{-# LINE 539 "Codec/Compression/Zlib/Stream.hsc" #-}
  (1)    -> return StreamEnd
{-# LINE 540 "Codec/Compression/Zlib/Stream.hsc" #-}
  (2)     -> do
{-# LINE 541 "Codec/Compression/Zlib/Stream.hsc" #-}
    adler <- withStreamPtr ((\hsc_ptr -> peekByteOff hsc_ptr 96))
{-# LINE 542 "Codec/Compression/Zlib/Stream.hsc" #-}
    err (NeedDict (DictHash adler))  "custom dictionary needed"
  (-5)     -> err BufferError  "buffer error"
{-# LINE 544 "Codec/Compression/Zlib/Stream.hsc" #-}
  (-1)         -> err FileError    "file error"
{-# LINE 545 "Codec/Compression/Zlib/Stream.hsc" #-}
  (-2)  -> err StreamError  "stream error"
{-# LINE 546 "Codec/Compression/Zlib/Stream.hsc" #-}
  (-3)    -> err DataError    "data error"
{-# LINE 547 "Codec/Compression/Zlib/Stream.hsc" #-}
  (-4)     -> err MemoryError  "insufficient memory"
{-# LINE 548 "Codec/Compression/Zlib/Stream.hsc" #-}
  (-6) -> err VersionError "incompatible zlib version"
{-# LINE 549 "Codec/Compression/Zlib/Stream.hsc" #-}
  other                      -> return $ Error Unexpected
                                  ("unexpected zlib status: " ++ show other)
 where
   err errCode altMsg = liftM (Error errCode) $ do
    msgPtr <- withStreamPtr ((\hsc_ptr -> peekByteOff hsc_ptr 48))
{-# LINE 554 "Codec/Compression/Zlib/Stream.hsc" #-}
    if msgPtr /= nullPtr
     then unsafeLiftIO (peekCAString msgPtr)
     else return altMsg

failIfError :: CInt -> Stream ()
failIfError errno = toStatus errno >>= \status -> case status of
  (Error _ msg) -> fail msg
  _             -> return ()


data Flush =
    NoFlush
  | SyncFlush
  | FullFlush
  | Finish
--  | Block -- only available in zlib 1.2 and later, uncomment if you need it.

fromFlush :: Flush -> CInt
fromFlush NoFlush   = 0
{-# LINE 573 "Codec/Compression/Zlib/Stream.hsc" #-}
fromFlush SyncFlush = 2
{-# LINE 574 "Codec/Compression/Zlib/Stream.hsc" #-}
fromFlush FullFlush = 3
{-# LINE 575 "Codec/Compression/Zlib/Stream.hsc" #-}
fromFlush Finish    = 4
{-# LINE 576 "Codec/Compression/Zlib/Stream.hsc" #-}
--  fromFlush Block     = #{const Z_BLOCK}


-- | The format used for compression or decompression. There are three
-- variations.
--
data Format = GZip | Zlib | Raw | GZipOrZlib
  deriving (Eq, Ord, Enum, Bounded, Show, Typeable

{-# LINE 585 "Codec/Compression/Zlib/Stream.hsc" #-}
              , Generic

{-# LINE 587 "Codec/Compression/Zlib/Stream.hsc" #-}
           )

{-# DEPRECATED GZip       "Use gzipFormat. Format constructors will be hidden in version 0.7"       #-}
{-# DEPRECATED Zlib       "Use zlibFormat. Format constructors will be hidden in version 0.7"       #-}
{-# DEPRECATED Raw        "Use rawFormat. Format constructors will be hidden in version 0.7"        #-}
{-# DEPRECATED GZipOrZlib "Use gzipOrZlibFormat. Format constructors will be hidden in version 0.7" #-}

-- | The gzip format uses a header with a checksum and some optional meta-data
-- about the compressed file. It is intended primarily for compressing
-- individual files but is also sometimes used for network protocols such as
-- HTTP. The format is described in detail in RFC #1952
-- <http://www.ietf.org/rfc/rfc1952.txt>
--
gzipFormat :: Format
gzipFormat = GZip

-- | The zlib format uses a minimal header with a checksum but no other
-- meta-data. It is especially designed for use in network protocols. The
-- format is described in detail in RFC #1950
-- <http://www.ietf.org/rfc/rfc1950.txt>
--
zlibFormat :: Format
zlibFormat = Zlib

-- | The \'raw\' format is just the compressed data stream without any
-- additional header, meta-data or data-integrity checksum. The format is
-- described in detail in RFC #1951 <http://www.ietf.org/rfc/rfc1951.txt>
--
rawFormat :: Format
rawFormat = Raw

-- | This is not a format as such. It enabled zlib or gzip decoding with
-- automatic header detection. This only makes sense for decompression.
--
gzipOrZlibFormat :: Format
gzipOrZlibFormat = GZipOrZlib

formatSupportsDictionary :: Format -> Bool
formatSupportsDictionary Zlib = True
formatSupportsDictionary Raw  = True
formatSupportsDictionary _    = False

-- | The compression method
--
data Method = Deflated
  deriving (Eq, Ord, Enum, Bounded, Show, Typeable

{-# LINE 634 "Codec/Compression/Zlib/Stream.hsc" #-}
              , Generic

{-# LINE 636 "Codec/Compression/Zlib/Stream.hsc" #-}
           )

{-# DEPRECATED Deflated "Use deflateMethod. Method constructors will be hidden in version 0.7" #-}

-- | \'Deflate\' is the only method supported in this version of zlib.
-- Indeed it is likely to be the only method that ever will be supported.
--
deflateMethod :: Method
deflateMethod = Deflated

fromMethod :: Method -> CInt
fromMethod Deflated = 8
{-# LINE 648 "Codec/Compression/Zlib/Stream.hsc" #-}


-- | The compression level parameter controls the amount of compression. This
-- is a trade-off between the amount of compression and the time required to do
-- the compression.
--
data CompressionLevel = 
    DefaultCompression
  | NoCompression
  | BestSpeed
  | BestCompression
  | CompressionLevel Int
  deriving (Eq, Show, Typeable

{-# LINE 662 "Codec/Compression/Zlib/Stream.hsc" #-}
              , Generic

{-# LINE 664 "Codec/Compression/Zlib/Stream.hsc" #-}
           )

{-# DEPRECATED DefaultCompression "Use defaultCompression. CompressionLevel constructors will be hidden in version 0.7" #-}
{-# DEPRECATED NoCompression      "Use noCompression. CompressionLevel constructors will be hidden in version 0.7"      #-}
{-# DEPRECATED BestSpeed          "Use bestSpeed. CompressionLevel constructors will be hidden in version 0.7"          #-}
{-# DEPRECATED BestCompression    "Use bestCompression. CompressionLevel constructors will be hidden in version 0.7"    #-}
--FIXME: cannot deprecate constructor named the same as the type
{- DEPRECATED CompressionLevel   "Use compressionLevel. CompressionLevel constructors will be hidden in version 0.7"   -}

-- | The default compression level is 6 (that is, biased towards higher
-- compression at expense of speed).
defaultCompression :: CompressionLevel
defaultCompression = DefaultCompression

-- | No compression, just a block copy.
noCompression :: CompressionLevel
noCompression = CompressionLevel 0

-- | The fastest compression method (less compression)
bestSpeed :: CompressionLevel
bestSpeed = CompressionLevel 1

-- | The slowest compression method (best compression).
bestCompression :: CompressionLevel
bestCompression = CompressionLevel 9

-- | A specific compression level between 0 and 9.
compressionLevel :: Int -> CompressionLevel
compressionLevel n
  | n >= 0 && n <= 9 = CompressionLevel n
  | otherwise        = error "CompressionLevel must be in the range 0..9"

fromCompressionLevel :: CompressionLevel -> CInt
fromCompressionLevel DefaultCompression   = -1
fromCompressionLevel NoCompression        = 0
fromCompressionLevel BestSpeed            = 1
fromCompressionLevel BestCompression      = 9
fromCompressionLevel (CompressionLevel n)
           | n >= 0 && n <= 9 = fromIntegral n
           | otherwise        = error "CompressLevel must be in the range 1..9"


-- | This specifies the size of the compression window. Larger values of this
-- parameter result in better compression at the expense of higher memory
-- usage.
--
-- The compression window size is the value of the the window bits raised to
-- the power 2. The window bits must be in the range @8..15@ which corresponds
-- to compression window sizes of 256b to 32Kb. The default is 15 which is also
-- the maximum size.
--
-- The total amount of memory used depends on the window bits and the
-- 'MemoryLevel'. See the 'MemoryLevel' for the details.
--
data WindowBits = WindowBits Int
                | DefaultWindowBits -- This constructor must be last to make
                                    -- the Ord instance work. The Ord instance
                                    -- is used by the tests.
                                    -- It makse sense because the default value
                                    -- is is also the max value at 15.
  deriving (Eq, Ord, Show, Typeable

{-# LINE 726 "Codec/Compression/Zlib/Stream.hsc" #-}
              , Generic

{-# LINE 728 "Codec/Compression/Zlib/Stream.hsc" #-}
           )

{-# DEPRECATED DefaultWindowBits  "Use defaultWindowBits. WindowBits constructors will be hidden in version 0.7" #-}
--FIXME: cannot deprecate constructor named the same as the type
{- DEPRECATED WindowBits         "Use windowBits. WindowBits constructors will be hidden in version 0.7"        -}

-- | The default 'WindowBits' is 15 which is also the maximum size.
--
defaultWindowBits :: WindowBits
defaultWindowBits = WindowBits 15

-- | A specific compression window size, specified in bits in the range @8..15@
--
windowBits :: Int -> WindowBits
windowBits n
  | n >= 8 && n <= 15 = WindowBits n
  | otherwise         = error "WindowBits must be in the range 8..15"

fromWindowBits :: Format -> WindowBits-> CInt
fromWindowBits format bits = (formatModifier format) (checkWindowBits bits)
  where checkWindowBits DefaultWindowBits = 15
        checkWindowBits (WindowBits n)
          | n >= 8 && n <= 15 = fromIntegral n
          | otherwise         = error "WindowBits must be in the range 8..15"
        formatModifier Zlib       = id
        formatModifier GZip       = (+16)
        formatModifier GZipOrZlib = (+32)
        formatModifier Raw        = negate


-- | The 'MemoryLevel' parameter specifies how much memory should be allocated
-- for the internal compression state. It is a tradoff between memory usage,
-- compression ratio and compression speed. Using more memory allows faster
-- compression and a better compression ratio.
--
-- The total amount of memory used for compression depends on the 'WindowBits'
-- and the 'MemoryLevel'. For decompression it depends only on the
-- 'WindowBits'. The totals are given by the functions:
--
-- > compressTotal windowBits memLevel = 4 * 2^windowBits + 512 * 2^memLevel
-- > decompressTotal windowBits = 2^windowBits
--
-- For example, for compression with the default @windowBits = 15@ and
-- @memLevel = 8@ uses @256Kb@. So for example a network server with 100
-- concurrent compressed streams would use @25Mb@. The memory per stream can be
-- halved (at the cost of somewhat degraded and slower compressionby) by
-- reducing the @windowBits@ and @memLevel@ by one.
--
-- Decompression takes less memory, the default @windowBits = 15@ corresponds
-- to just @32Kb@.
--
data MemoryLevel =
    DefaultMemoryLevel
  | MinMemoryLevel
  | MaxMemoryLevel
  | MemoryLevel Int
  deriving (Eq, Show, Typeable

{-# LINE 786 "Codec/Compression/Zlib/Stream.hsc" #-}
              , Generic

{-# LINE 788 "Codec/Compression/Zlib/Stream.hsc" #-}
           )

{-# DEPRECATED DefaultMemoryLevel "Use defaultMemoryLevel. MemoryLevel constructors will be hidden in version 0.7" #-}
{-# DEPRECATED MinMemoryLevel     "Use minMemoryLevel. MemoryLevel constructors will be hidden in version 0.7"     #-}
{-# DEPRECATED MaxMemoryLevel     "Use maxMemoryLevel. MemoryLevel constructors will be hidden in version 0.7"     #-}
--FIXME: cannot deprecate constructor named the same as the type
{- DEPRECATED MemoryLevel        "Use memoryLevel. MemoryLevel constructors will be hidden in version 0.7"        -}

-- | The default memory level. (Equivalent to @'memoryLevel' 8@)
--
defaultMemoryLevel :: MemoryLevel
defaultMemoryLevel = MemoryLevel 8

-- | Use minimum memory. This is slow and reduces the compression ratio.
-- (Equivalent to @'memoryLevel' 1@)
--
minMemoryLevel :: MemoryLevel
minMemoryLevel = MemoryLevel 1

-- | Use maximum memory for optimal compression speed.
-- (Equivalent to @'memoryLevel' 9@)
--
maxMemoryLevel :: MemoryLevel
maxMemoryLevel = MemoryLevel 9

-- | A specific level in the range @1..9@
--
memoryLevel :: Int -> MemoryLevel
memoryLevel n
  | n >= 1 && n <= 9 = MemoryLevel n
  | otherwise        = error "MemoryLevel must be in the range 1..9"

fromMemoryLevel :: MemoryLevel -> CInt
fromMemoryLevel DefaultMemoryLevel = 8
fromMemoryLevel MinMemoryLevel     = 1
fromMemoryLevel MaxMemoryLevel     = 9
fromMemoryLevel (MemoryLevel n)
         | n >= 1 && n <= 9 = fromIntegral n
         | otherwise        = error "MemoryLevel must be in the range 1..9"


-- | The strategy parameter is used to tune the compression algorithm.
--
-- The strategy parameter only affects the compression ratio but not the
-- correctness of the compressed output even if it is not set appropriately.
--
data CompressionStrategy =
    DefaultStrategy
  | Filtered
  | HuffmanOnly
  deriving (Eq, Ord, Enum, Bounded, Show, Typeable

{-# LINE 840 "Codec/Compression/Zlib/Stream.hsc" #-}
              , Generic

{-# LINE 842 "Codec/Compression/Zlib/Stream.hsc" #-}
           )

{-
-- -- only available in zlib 1.2 and later, uncomment if you need it.
  | RLE             -- ^ Use 'RLE' to limit match distances to one (run-length
                    --   encoding). 'RLE' is designed to be almost as fast as
                    --   'HuffmanOnly', but give better compression for PNG
                    --   image data.
  | Fixed           -- ^ 'Fixed' prevents the use of dynamic Huffman codes,
                    --   allowing for a simpler decoder for special applications.
-}

{-# DEPRECATED DefaultStrategy "Use defaultStrategy. CompressionStrategy constructors will be hidden in version 0.7"     #-}
{-# DEPRECATED Filtered        "Use filteredStrategy. CompressionStrategy constructors will be hidden in version 0.7"    #-}
{-# DEPRECATED HuffmanOnly     "Use huffmanOnlyStrategy. CompressionStrategy constructors will be hidden in version 0.7" #-}

-- | Use this default compression strategy for normal data.
--
defaultStrategy :: CompressionStrategy
defaultStrategy = DefaultStrategy

-- | Use the filtered compression strategy for data produced by a filter (or
-- predictor). Filtered data consists mostly of small values with a somewhat
-- random distribution. In this case, the compression algorithm is tuned to
-- compress them better. The effect of this strategy is to force more Huffman
-- coding and less string matching; it is somewhat intermediate between
-- 'defaultCompressionStrategy' and 'huffmanOnlyCompressionStrategy'.
--
filteredStrategy :: CompressionStrategy
filteredStrategy = Filtered

-- | Use the Huffman-only compression strategy to force Huffman encoding only
-- (no string match).
--
huffmanOnlyStrategy :: CompressionStrategy
huffmanOnlyStrategy = HuffmanOnly


fromCompressionStrategy :: CompressionStrategy -> CInt
fromCompressionStrategy DefaultStrategy = 0
{-# LINE 882 "Codec/Compression/Zlib/Stream.hsc" #-}
fromCompressionStrategy Filtered        = 1
{-# LINE 883 "Codec/Compression/Zlib/Stream.hsc" #-}
fromCompressionStrategy HuffmanOnly     = 2
{-# LINE 884 "Codec/Compression/Zlib/Stream.hsc" #-}
--fromCompressionStrategy RLE             = #{const Z_RLE}
--fromCompressionStrategy Fixed           = #{const Z_FIXED}


withStreamPtr :: (Ptr StreamState -> IO a) -> Stream a
withStreamPtr f = do
  stream <- getStreamState
  unsafeLiftIO (withForeignPtr stream f)

withStreamState :: (StreamState -> IO a) -> Stream a
withStreamState f = do
  stream <- getStreamState
  unsafeLiftIO (withForeignPtr stream (f . StreamState))

setInAvail :: Int -> Stream ()
setInAvail val = withStreamPtr $ \ptr ->
  (\hsc_ptr -> pokeByteOff hsc_ptr 8) ptr (fromIntegral val :: CUInt)
{-# LINE 901 "Codec/Compression/Zlib/Stream.hsc" #-}

getInAvail :: Stream Int
getInAvail = liftM (fromIntegral :: CUInt -> Int) $
  withStreamPtr ((\hsc_ptr -> peekByteOff hsc_ptr 8))
{-# LINE 905 "Codec/Compression/Zlib/Stream.hsc" #-}

setInNext :: Ptr Word8 -> Stream ()
setInNext val = withStreamPtr (\ptr -> (\hsc_ptr -> pokeByteOff hsc_ptr 0) ptr val)
{-# LINE 908 "Codec/Compression/Zlib/Stream.hsc" #-}

getInNext :: Stream (Ptr Word8)
getInNext = withStreamPtr ((\hsc_ptr -> peekByteOff hsc_ptr 0))
{-# LINE 911 "Codec/Compression/Zlib/Stream.hsc" #-}

setOutFree :: Int -> Stream ()
setOutFree val = withStreamPtr $ \ptr ->
  (\hsc_ptr -> pokeByteOff hsc_ptr 32) ptr (fromIntegral val :: CUInt)
{-# LINE 915 "Codec/Compression/Zlib/Stream.hsc" #-}

getOutFree :: Stream Int
getOutFree = liftM (fromIntegral :: CUInt -> Int) $
  withStreamPtr ((\hsc_ptr -> peekByteOff hsc_ptr 32))
{-# LINE 919 "Codec/Compression/Zlib/Stream.hsc" #-}

setOutNext  :: Ptr Word8 -> Stream ()
setOutNext val = withStreamPtr (\ptr -> (\hsc_ptr -> pokeByteOff hsc_ptr 24) ptr val)
{-# LINE 922 "Codec/Compression/Zlib/Stream.hsc" #-}


{-# LINE 927 "Codec/Compression/Zlib/Stream.hsc" #-}

inflateInit :: Format -> WindowBits -> Stream ()
inflateInit format bits = do
  checkFormatSupported format
  err <- withStreamState $ \zstream ->
    c_inflateInit2 zstream (fromIntegral (fromWindowBits format bits))
  failIfError err
  getStreamState >>= unsafeLiftIO . addForeignPtrFinalizer c_inflateEnd

deflateInit :: Format
            -> CompressionLevel
            -> Method
            -> WindowBits
            -> MemoryLevel
            -> CompressionStrategy
            -> Stream ()
deflateInit format compLevel method bits memLevel strategy = do
  checkFormatSupported format
  err <- withStreamState $ \zstream ->
    c_deflateInit2 zstream
                  (fromCompressionLevel compLevel)
                  (fromMethod method)
                  (fromWindowBits format bits)
                  (fromMemoryLevel memLevel)
                  (fromCompressionStrategy strategy)
  failIfError err
  getStreamState >>= unsafeLiftIO . addForeignPtrFinalizer c_deflateEnd

inflate_ :: Flush -> Stream Status
inflate_ flush = do
  err <- withStreamState $ \zstream ->
    c_inflate zstream (fromFlush flush)
  toStatus err

deflate_ :: Flush -> Stream Status
deflate_ flush = do
  err <- withStreamState $ \zstream ->
    c_deflate zstream (fromFlush flush)
  toStatus err

-- | This never needs to be used as the stream's resources will be released
-- automatically when no longer needed, however this can be used to release
-- them early. Only use this when you can guarantee that the stream will no
-- longer be needed, for example if an error occurs or if the stream ends.
--
finalise :: Stream ()

{-# LINE 974 "Codec/Compression/Zlib/Stream.hsc" #-}
--TODO: finalizeForeignPtr is ghc-only
finalise = getStreamState >>= unsafeLiftIO . finalizeForeignPtr

{-# LINE 979 "Codec/Compression/Zlib/Stream.hsc" #-}

checkFormatSupported :: Format -> Stream ()
checkFormatSupported format = do
  version <- unsafeLiftIO (peekCAString =<< c_zlibVersion)
  case version of
    ('1':'.':'1':'.':_)
       | format == GZip
      || format == GZipOrZlib
      -> fail $ "version 1.1.x of the zlib C library does not support the"
             ++ " 'gzip' format via the in-memory api, only the 'raw' and "
             ++ " 'zlib' formats."
    _ -> return ()

----------------------
-- The foreign imports

newtype StreamState = StreamState (Ptr StreamState)

-- inflateInit2 and deflateInit2 are actually defined as macros in zlib.h
-- They are defined in terms of inflateInit2_ and deflateInit2_ passing two
-- additional arguments used to detect compatability problems. They pass the
-- version of zlib as a char * and the size of the z_stream struct.
-- If we compile via C then we can avoid this hassle however thats not really
-- kosher since the Haskell FFI is defined at the C ABI level, not the C
-- language level. There is no requirement to compile via C and pick up C
-- headers. So it's much better if we can make it work properly and that'd
-- also allow compiling via ghc's ncg which is a good thing since the C
-- backend is not going to be around forever.
--
-- So we define c_inflateInit2 and c_deflateInit2 here as wrappers around
-- their _ counterparts and pass the extra args.

foreign import ccall unsafe "zlib.h inflateInit2_"
  c_inflateInit2_ :: StreamState -> CInt -> Ptr CChar -> CInt -> IO CInt

c_inflateInit2 :: StreamState -> CInt -> IO CInt
c_inflateInit2 z n =
  withCAString "1.2.8" $ \versionStr ->
{-# LINE 1017 "Codec/Compression/Zlib/Stream.hsc" #-}
    c_inflateInit2_ z n versionStr (112 :: CInt)
{-# LINE 1018 "Codec/Compression/Zlib/Stream.hsc" #-}

foreign import ccall unsafe "zlib.h inflate"
  c_inflate :: StreamState -> CInt -> IO CInt

foreign import ccall unsafe "zlib.h &inflateEnd"
  c_inflateEnd :: FinalizerPtr StreamState

foreign import ccall unsafe "zlib.h inflateReset"
  c_inflateReset :: StreamState -> IO CInt

foreign import ccall unsafe "zlib.h deflateInit2_"
  c_deflateInit2_ :: StreamState
                  -> CInt -> CInt -> CInt -> CInt -> CInt
                  -> Ptr CChar -> CInt
                  -> IO CInt

c_deflateInit2 :: StreamState
               -> CInt -> CInt -> CInt -> CInt -> CInt -> IO CInt
c_deflateInit2 z a b c d e =
  withCAString "1.2.8" $ \versionStr ->
{-# LINE 1038 "Codec/Compression/Zlib/Stream.hsc" #-}
    c_deflateInit2_ z a b c d e versionStr (112 :: CInt)
{-# LINE 1039 "Codec/Compression/Zlib/Stream.hsc" #-}

foreign import ccall unsafe "zlib.h deflateSetDictionary"
  c_deflateSetDictionary :: StreamState
                         -> Ptr CChar
                         -> CUInt
                         -> IO CInt

foreign import ccall unsafe "zlib.h inflateSetDictionary"
  c_inflateSetDictionary :: StreamState
                         -> Ptr CChar
                         -> CUInt
                         -> IO CInt

foreign import ccall unsafe "zlib.h deflate"
  c_deflate :: StreamState -> CInt -> IO CInt

foreign import ccall unsafe "zlib.h &deflateEnd"
  c_deflateEnd :: FinalizerPtr StreamState

foreign import ccall unsafe "zlib.h zlibVersion"
  c_zlibVersion :: IO CString

foreign import ccall unsafe "zlib.h adler32"
  c_adler32 :: CULong
            -> Ptr CChar
            -> CUInt
            -> IO CULong