hslogger-1.2.0: Versatile logging framework

Portabilityportable
Stabilityprovisional
MaintainerJohn Goerzen <jgoerzen@complete.org>
Safe HaskellNone

System.Log.Logger

Contents

Description

Haskell Logging Framework, Primary Interface

Written by John Goerzen, jgoerzen@complete.org

Welcome to the error and information logging system for Haskell.

This system is patterned after Python's logging module, http://www.python.org/doc/current/lib/module-logging.html and some of the documentation here was based on documentation there.

To log a message, you perform operations on Loggers. Each Logger has a name, and they are arranged hierarchically. Periods serve as separators. Therefore, a Logger named "foo" is the parent of loggers "foo.printing", "foo.html", and "foo.io". These names can be anything you want. They're used to indicate the area of an application or library in which a logged message originates. Later you will see how you can use this concept to fine-tune logging behaviors based on specific application areas.

You can also tune logging behaviors based upon how important a message is. Each message you log will have an importance associated with it. The different importance levels are given by the Priority type. I've also provided some convenient functions that correspond to these importance levels: debugM through emergencyM log messages with the specified importance.

Now, an importance level (or Priority) is associated not just with a particular message but also with a Logger. If the Priority of a given log message is lower than the Priority configured in the Logger, that message is ignored. This way, you can globally control how verbose your logging output is.

Now, let's follow what happens under the hood when you log a message. We'll assume for the moment that you are logging something with a high enough Priority that it passes the test in your Logger. In your code, you'll call logM or something like debugM to log the message. Your Logger decides to accept the message. What next?

Well, we also have a notion of handlers (LogHandlers, to be precise). A LogHandler is a thing that takes a message and sends it somewhere. That "somewhere" may be your screen (via standard error), your system's logging infrastructure (via syslog), a file, or other things. Each Logger can have zero or more LogHandlers associated with it. When your Logger has a message to log, it passes it to every LogHandler it knows of to process. What's more, it is also passed to /all handlers of all ancestors of the Logger/, regardless of whether those Loggers would normally have passed on the message.

Each Logger can optionally store a Priority. If a given Logger does not have a Priority, and you log a message to that logger, the system will use the priority of the parent of the destination logger to find out whether to log the message. If the parent has no priority associated with it, the system continues walking up the tree to figure out a priority until it hits the root logger. In this way, you can easily adjust the priority of an entire subtree of loggers. When a new logger is created, it has no priority by default. The exception is the root logger, which has a WARNING priority by default.

To give you one extra little knob to turn, LogHandlers can also have importance levels (Priority) associated with them in the same way that Loggers do. They act just like the Priority value in the Loggers -- as a filter. It's useful, for instance, to make sure that under no circumstances will a mere DEBUG message show up in your syslog.

There are three built-in handlers given in two built-in modules: System.Log.Handler.Simple and System.Log.Handler.Syslog.

There is a special logger known as the root logger that sits at the top of the logger hierarchy. It is always present, and handlers attached there will be called for every message. You can use getRootLogger to get it or rootLoggerName to work with it by name.

The formatting of log messages may be customized by setting a LogFormatter on the desired LogHandler. There are a number of simple formatters defined in System.Log.Formatter, which may be used directly, or extend to create your own formatter.

Here's an example to illustrate some of these concepts:

 import System.Log.Logger
 import System.Log.Handler.Syslog
 import System.Log.Handler.Simple
 import System.Log.Handler (setFormatter)
 import System.Log.Formatter
 
 -- By default, all messages of level WARNING and above are sent to stderr.
 -- Everything else is ignored.
 
 -- "MyApp.Component" is an arbitrary string; you can tune
 -- logging behavior based on it later.
 main = do
        debugM "MyApp.Component"  "This is a debug message -- never to be seen"
        warningM "MyApp.Component2" "Something Bad is about to happen."
 
        -- Copy everything to syslog from here on out.
        s <- openlog "SyslogStuff" [PID] USER DEBUG
        updateGlobalLogger rootLoggerName (addHandler s)
       
        errorM "MyApp.Component" "This is going to stderr and syslog."

        -- Now we'd like to see everything from BuggyComponent
        -- at DEBUG or higher go to syslog and stderr.
        -- Also, we'd like to still ignore things less than
        -- WARNING in other areas.
        -- 
        -- So, we adjust the Logger for MyApp.BuggyComponent.

        updateGlobalLogger "MyApp.BuggyComponent"
                           (setLevel DEBUG)

        -- This message will go to syslog and stderr
        debugM "MyApp.BuggyComponent" "This buggy component is buggy"
 
        -- This message will go to syslog and stderr too.
        warningM "MyApp.BuggyComponent" "Still Buggy"
 
        -- This message goes nowhere.
        debugM "MyApp.WorkingComponent" "Hello"

        -- Now we decide we'd also like to log everything from BuggyComponent at DEBUG
        -- or higher to a file for later diagnostics.  We'd also like to customize the
        -- format of the log message, so we use a 'simpleLogFormatter'

        h <- fileHandler "debug.log" DEBUG >>= \lh -> return $
                 setFormatter lh (simpleLogFormatter "[$time : $loggername : $prio] $msg")
        updateGlobalLogger "MyApp.BuggyComponent" (addHandler h)
       
        -- This message will go to syslog and stderr, 
        -- and to the file "debug.log" with a format like :
        -- [2010-05-23 16:47:28 : MyApp.BuggyComponent : DEBUG] Some useful diagnostics...
        debugM "MyApp.BuggyComponent" "Some useful diagnostics..."


Synopsis

Basic Types

Re-Exported from System.Log

data Priority Source

Priorities are used to define how important a log message is. Users can filter log messages based on priorities.

These have their roots on the traditional syslog system. The standard definitions are given below, but you are free to interpret them however you like. They are listed here in ascending importance order.

Constructors

DEBUG

Debug messages

INFO

Information

NOTICE

Normal runtime conditions

WARNING

General Warnings

ERROR

General Errors

CRITICAL

Severe situations

ALERT

Take immediate action

EMERGENCY

System is unusable

Logging Messages

Basic

logMSource

Arguments

:: String

Name of the logger to use

-> Priority

Priority of this message

-> String

The log text itself

-> IO () 

Log a message using the given logger at a given priority.

Utility Functions

debugMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at DEBUG priority

infoMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at INFO priority

noticeMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at NOTICE priority

warningMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at WARNING priority

errorMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at ERROR priority

criticalMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at CRITICAL priority

alertMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at ALERT priority

emergencyMSource

Arguments

:: String

Logger name

-> String

Log message

-> IO () 

Log a message at EMERGENCY priority

removeAllHandlers :: IO ()Source

Allow gracefull shutdown. Release all opened fileshandlersetc.

traplogging :: String -> Priority -> String -> IO a -> IO aSource

Traps exceptions that may occur, logging them, then passing them on.

Takes a logger name, priority, leading description text (you can set it to "" if you don't want any), and action to run.

Logging to a particular Logger by object

logL :: Logger -> Priority -> String -> IO ()Source

Log a message, assuming the current logger's level permits it.

Logger Manipulation

These functions help you work with loggers. There are some special things to be aware of.

First of all, whenever you first access a given logger by name, it magically springs to life. It has a default Priority of Nothing and an empty handler list -- which means that it will inherit whatever its parents do.

Finding / Creating Loggers

getLogger :: String -> IO LoggerSource

Returns the logger for the given name. If no logger with that name exists, creates new loggers and any necessary parent loggers, with no connected handlers.

getRootLogger :: IO LoggerSource

Returns the root logger.

rootLoggerName :: StringSource

This is the base class for the various log handlers. They should all adhere to this class.

The name of the root logger, which is always defined and present on the system.

Modifying Loggers

Keep in mind that "modification" here is modification in the Haskell sense. We do not actually cause mutation in a specific Logger. Rather, we return you a new Logger object with the change applied.

Also, please note that these functions will not have an effect on the global Logger hierarchy. You may use your new Loggers locally, but other functions won't see the changes. To make a change global, you'll need to use updateGlobalLogger or saveGlobalLogger.

addHandler :: LogHandler a => a -> Logger -> LoggerSource

Add handler to Logger. Returns a new Logger.

setHandlers :: LogHandler a => [a] -> Logger -> LoggerSource

Set the 'Logger'\'s list of handlers to the list supplied. All existing handlers are removed first.

getLevel :: Logger -> Maybe PrioritySource

Returns the level of the logger. Items beneath this level will be ignored.

setLevel :: Priority -> Logger -> LoggerSource

Sets the level of the Logger. Returns a new Logger object with the new level.

clearLevel :: Logger -> LoggerSource

Clears the level of the Logger. It will now inherit the level of | its parent.

Saving Your Changes

These functions commit changes you've made to loggers to the global logger hierarchy.

saveGlobalLogger :: Logger -> IO ()Source

Updates the global record for the given logger to take into account any changes you may have made.

updateGlobalLoggerSource

Arguments

:: String

Logger name

-> (Logger -> Logger)

Function to call

-> IO () 

Helps you make changes on the given logger. Takes a function that makes changes and writes those changes back to the global database. Here's an example from above ("s" is a LogHandler):

 updateGlobalLogger "MyApp.BuggyComponent"
                    (setLevel DEBUG . setHandlers [s])