wl-pprint-text-1.1.0.0: A Wadler/Leijen Pretty Printer for Text values

Portabilityportable
Stabilityprovisional
MaintainerIvan.Miljenovic@gmail.com
Safe HaskellSafe-Infered

Text.PrettyPrint.Leijen.Text.Monadic

Contents

Description

This module provides a version of Text.PrettyPrint.Leijen.Text where the combinators have been lifted into a Monad. The main usage for this is for state-based pretty-printing.

Synopsis

Documents

data Doc Source

The abstract data type Doc represents pretty documents.

Doc is an instance of the Show class. (show doc) pretty prints document doc with a page width of 100 characters and a ribbon width of 40 characters.

 show (text "hello" <$> text "world")

Which would return the string "hello\nworld", i.e.

   hello
   world

Basic combinators

empty :: Monad m => m DocSource

The empty document is, indeed, empty. Although empty has no content, it does have a 'height' of 1 and behaves exactly like (text "") (and is therefore not a unit of <$>).

char :: Monad m => Char -> m DocSource

The document (char c) contains the literal character c. The character shouldn't be a newline ('\n'), the function line should be used for line breaks.

text :: Monad m => Text -> m DocSource

The document (text s) contains the literal string s. The string shouldn't contain any newline ('\n') characters. If the string contains newline characters, the function string should be used.

(<>) :: Monad m => m Doc -> m Doc -> m DocSource

The document (x <> y) concatenates document x and document y. It is an associative operation having empty as a left and right unit. (infixr 6)

nest :: Monad m => Int -> m Doc -> m DocSource

The document (nest i x) renders document x with the current indentation level increased by i (See also hang, align and indent).

 nest 2 (text "hello" <$> text "world") <$> text "!"

outputs as:

   hello
     world
   !

line :: Monad m => m DocSource

The line document advances to the next line and indents to the current nesting level. Document line behaves like (text " ") if the line break is undone by group.

linebreak :: Monad m => m DocSource

The linebreak document advances to the next line and indents to the current nesting level. Document linebreak behaves like empty if the line break is undone by group.

group :: Monad m => m Doc -> m DocSource

The group combinator is used to specify alternative layouts. The document (group x) undoes all line breaks in document x. The resulting line is added to the current line if that fits the page. Otherwise, the document x is rendered without any changes.

softline :: Monad m => m DocSource

The document softline behaves like space if the resulting output fits the page, otherwise it behaves like line.

softbreak :: Monad m => m DocSource

The document softbreak behaves like empty if the resulting output fits the page, otherwise it behaves like line.

Alignment

align :: Monad m => m Doc -> m DocSource

The document (align x) renders document x with the nesting level set to the current column. It is used for example to implement hang.

As an example, we will put a document right above another one, regardless of the current nesting level:

 x $$ y = align (x <$> y)
 test = text "hi" <+> (text "nice" $$ text "world")

which will be layed out as:

   hi nice
      world

hang :: Monad m => Int -> m Doc -> m DocSource

The hang combinator implements hanging indentation. The document (hang i x) renders document x with a nesting level set to the current column plus i. The following example uses hanging indentation for some text:

 test = hang 4 (fillSep (map text
         (words "the hang combinator indents these words !")))

Which lays out on a page with a width of 20 characters as:

   the hang combinator
       indents these
       words !

The hang combinator is implemented as:

 hang i x = align (nest i x)

indent :: Monad m => Int -> m Doc -> m DocSource

The document (indent i x) indents document x with i spaces.

 test = indent 4 (fillSep (map text
         (words "the indent combinator indents these words !")))

Which lays out with a page width of 20 as:

       the indent
       combinator
       indents these
       words !

encloseSep :: Monad m => m Doc -> m Doc -> m Doc -> m [Doc] -> m DocSource

The document (encloseSep l r sep xs) concatenates the documents xs separated by sep and encloses the resulting document by l and r. The documents are rendered horizontally if that fits the page. Otherwise they are aligned vertically. All separators are put in front of the elements. For example, the combinator list can be defined with encloseSep:

 list xs = encloseSep lbracket rbracket comma xs
 test = text "list" <+> (list (map int [10,200,3000]))

Which is layed out with a page width of 20 as:

   list [10,200,3000]

But when the page width is 15, it is layed out as:

   list [10
        ,200
        ,3000]

list :: Monad m => m [Doc] -> m DocSource

The document (list xs) comma separates the documents xs and encloses them in square brackets. The documents are rendered horizontally if that fits the page. Otherwise they are aligned vertically. All comma separators are put in front of the elements.

tupled :: Monad m => m [Doc] -> m DocSource

The document (tupled xs) comma separates the documents xs and encloses them in parenthesis. The documents are rendered horizontally if that fits the page. Otherwise they are aligned vertically. All comma separators are put in front of the elements.

semiBraces :: Monad m => m [Doc] -> m DocSource

The document (semiBraces xs) separates the documents xs with semi colons and encloses them in braces. The documents are rendered horizontally if that fits the page. Otherwise they are aligned vertically. All semi colons are put in front of the elements.

Operators

(<+>) :: Monad m => m Doc -> m Doc -> m DocSource

The document (x <+> y) concatenates document x and y with a space in between. (infixr 6)

(<$>) :: Monad m => m Doc -> m Doc -> m DocSource

The document (x <$> y) concatenates document x and y with a line in between. (infixr 5)

(</>) :: Monad m => m Doc -> m Doc -> m DocSource

The document (x </> y) concatenates document x and y with a softline in between. This effectively puts x and y either next to each other (with a space in between) or underneath each other. (infixr 5)

(<$$>) :: Monad m => m Doc -> m Doc -> m DocSource

The document (x <$$> y) concatenates document x and y with a linebreak in between. (infixr 5)

(<//>) :: Monad m => m Doc -> m Doc -> m DocSource

The document (x <//> y) concatenates document x and y with a softbreak in between. This effectively puts x and y either right next to each other or underneath each other. (infixr 5)

List combinators

hsep :: Monad m => m [Doc] -> m DocSource

The document (hsep xs) concatenates all documents xs horizontally with (<+>).

vsep :: Monad m => m [Doc] -> m DocSource

The document (vsep xs) concatenates all documents xs vertically with (<$>). If a group undoes the line breaks inserted by vsep, all documents are separated with a space.

 someText = map text (words ("text to lay out"))

 test = text "some" <+> vsep someText

This is layed out as:

   some text
   to
   lay
   out

The align combinator can be used to align the documents under their first element

 test = text "some" <+> align (vsep someText)

Which is printed as:

   some text
        to
        lay
        out

fillSep :: Monad m => m [Doc] -> m DocSource

The document (fillSep xs) concatenates documents xs horizontally with (<+>) as long as its fits the page, than inserts a line and continues doing that for all documents in xs.

 fillSep xs = foldr (</>) empty xs

sep :: Monad m => m [Doc] -> m DocSource

The document (sep xs) concatenates all documents xs either horizontally with (<+>), if it fits the page, or vertically with (<$>).

 sep xs = group (vsep xs)

hcat :: Monad m => m [Doc] -> m DocSource

The document (hcat xs) concatenates all documents xs horizontally with (<>).

vcat :: Monad m => m [Doc] -> m DocSource

The document (vcat xs) concatenates all documents xs vertically with (<$$>). If a group undoes the line breaks inserted by vcat, all documents are directly concatenated.

fillCat :: Monad m => m [Doc] -> m DocSource

The document (fillCat xs) concatenates documents xs horizontally with (<>) as long as its fits the page, than inserts a linebreak and continues doing that for all documents in xs.

 fillCat xs = foldr (<//>) empty xs

cat :: Monad m => m [Doc] -> m DocSource

The document (cat xs) concatenates all documents xs either horizontally with (<>), if it fits the page, or vertically with (<$$>).

 cat xs = group (vcat xs)

punctuate :: Monad m => m Doc -> m [Doc] -> m [Doc]Source

(punctuate p xs) concatenates all documents in xs with document p except for the last document.

 someText = map text ["words","in","a","tuple"]
 test = parens (align (cat (punctuate comma someText)))

This is layed out on a page width of 20 as:

   (words,in,a,tuple)

But when the page width is 15, it is layed out as:

   (words,
    in,
    a,
    tuple)

(If you want put the commas in front of their elements instead of at the end, you should use tupled or, in general, encloseSep.)

Fillers

fill :: Monad m => Int -> m Doc -> m DocSource

The document (fill i x) renders document x. It than appends spaces until the width is equal to i. If the width of x is already larger, nothing is appended. This combinator is quite useful in practice to output a list of bindings. The following example demonstrates this.

 types = [("empty","Doc")
          ,("nest","Int -> Doc -> Doc")
          ,("linebreak","Doc")]

 ptype (name,tp)
 = fill 6 (text name) <+> text "::" <+> text tp

 test = text "let" <+> align (vcat (map ptype types))

Which is layed out as:

   let empty  :: Doc
       nest   :: Int -> Doc -> Doc
       linebreak :: Doc

fillBreak :: Monad m => Int -> m Doc -> m DocSource

The document (fillBreak i x) first renders document x. It than appends spaces until the width is equal to i. If the width of x is already larger than i, the nesting level is increased by i and a line is appended. When we redefine ptype in the previous example to use fillBreak, we get a useful variation of the previous output:

 ptype (name,tp)
 = fillBreak 6 (text name) <+> text "::" <+> text tp

The output will now be:

   let empty  :: Doc
       nest   :: Int -> Doc -> Doc
       linebreak
              :: Doc

Bracketing combinators

enclose :: Monad m => m Doc -> m Doc -> m Doc -> m DocSource

The document (enclose l r x) encloses document x between documents l and r using (<>).

 enclose l r x = l <> x <> r

squotes :: Monad m => m Doc -> m DocSource

Document (squotes x) encloses document x with single quotes "'".

dquotes :: Monad m => m Doc -> m DocSource

Document (dquotes x) encloses document x with double quotes '"'.

parens :: Monad m => m Doc -> m DocSource

Document (parens x) encloses document x in parenthesis, "(" and ")".

angles :: Monad m => m Doc -> m DocSource

Document (angles x) encloses document x in angles, "<" and ">".

braces :: Monad m => m Doc -> m DocSource

Document (braces x) encloses document x in braces, "{" and "}".

brackets :: Monad m => m Doc -> m DocSource

Document (brackets x) encloses document x in square brackets, "[" and "]".

Character documents

lparen :: Monad m => m DocSource

The document lparen contains a left parenthesis, "(".

rparen :: Monad m => m DocSource

The document rparen contains a right parenthesis, ")".

langle :: Monad m => m DocSource

The document langle contains a left angle, "<".

rangle :: Monad m => m DocSource

The document rangle contains a right angle, ">".

lbrace :: Monad m => m DocSource

The document lbrace contains a left brace, "{".

rbrace :: Monad m => m DocSource

The document rbrace contains a right brace, "}".

lbracket :: Monad m => m DocSource

The document lbracket contains a left square bracket, "[".

rbracket :: Monad m => m DocSource

The document rbracket contains a right square bracket, "]".

squote :: Monad m => m DocSource

The document squote contains a single quote, "'".

dquote :: Monad m => m DocSource

The document dquote contains a double quote, '"'.

semi :: Monad m => m DocSource

The document semi contains a semi colon, ";".

colon :: Monad m => m DocSource

The document colon contains a colon, ":".

comma :: Monad m => m DocSource

The document comma contains a comma, ",".

space :: Monad m => m DocSource

The document space contains a single space, " ".

 x <+> y = x <> space <> y

dot :: Monad m => m DocSource

The document dot contains a single dot, ".".

backslash :: Monad m => m DocSource

The document backslash contains a back slash, "\".

equals :: Monad m => m DocSource

The document equals contains an equal sign, "=".

Primitive type documents

string :: Monad m => Text -> m DocSource

The document (string s) concatenates all characters in s using line for newline characters and char for all other characters. It is used instead of text whenever the text contains newline characters.

int :: Monad m => Int -> m DocSource

The document (int i) shows the literal integer i using text.

integer :: Monad m => Integer -> m DocSource

The document (integer i) shows the literal integer i using text.

float :: Monad m => Float -> m DocSource

The document (float f) shows the literal float f using text.

double :: Monad m => Double -> m DocSource

The document (double d) shows the literal double d using text.

rational :: Monad m => Rational -> m DocSource

The document (rational r) shows the literal rational r using text.

bool :: Monad m => Bool -> m DocSource

The document (bool b) shows the literal boolean b using text.

Position-based combinators

column :: Monad m => m (Int -> Doc) -> m DocSource

Specifies how to create the document based upon which column it is in.

nesting :: Monad m => m (Int -> Doc) -> m DocSource

Specifies how to nest the document based upon which column it is being nested in.

width :: Monad m => m Doc -> m (Int -> Doc) -> m DocSource

Pretty class

class Pretty a whereSource

The member prettyList is only used to define the instance Pretty a => Pretty [a]. In normal circumstances only the pretty function is used.

Methods

pretty :: a -> DocSource

prettyList :: [a] -> DocSource

Instances

prettyM :: (Pretty a, Monad m) => a -> m DocSource

A monadic version of pretty; this is to allow you to use the Pretty class without having to create extra instances. Alternatively, you may wish to make a variant of Pretty using the actual Monad to be used.

Rendering

data SimpleDoc Source

The data type SimpleDoc represents rendered documents and is used by the display functions.

The Int in SText contains the length of the string. The Int in SLine contains the indentation for that line. The library provides two default display functions displayS and displayIO. You can provide your own display function by writing a function from a SimpleDoc to your own output format.

Instances

renderPretty :: Float -> Int -> Doc -> SimpleDocSource

This is the default pretty printer which is used by show, putDoc and hPutDoc. (renderPretty ribbonfrac width x) renders document x with a page width of width and a ribbon width of (ribbonfrac * width) characters. The ribbon width is the maximal amount of non-indentation characters on a line. The parameter ribbonfrac should be between 0.0 and 1.0. If it is lower or higher, the ribbon width will be 0 or width respectively.

renderCompact :: Doc -> SimpleDocSource

(renderCompact x) renders document x without adding any indentation. Since no 'pretty' printing is involved, this renderer is very fast. The resulting output contains fewer characters than a pretty printed version and can be used for output that is read by other programs.

renderOneLine :: Doc -> SimpleDocSource

(renderOneLine x) renders document x without adding any indentation or newlines.

displayT :: SimpleDoc -> TextSource

(displayT simpleDoc) takes the output simpleDoc from a rendering function and transforms it to a lazy Text value.

 showWidth :: Int -> Doc -> Text
 showWidth w x = displayT (renderPretty 0.4 w x)

displayIO :: Handle -> SimpleDoc -> IO ()Source

(displayIO handle simpleDoc) writes simpleDoc to the file handle handle. This function is used for example by hPutDoc:

 hPutDoc handle doc = displayIO handle (renderPretty 0.4 100 doc)

putDoc :: Doc -> IO ()Source

The action (putDoc doc) pretty prints document doc to the standard output, with a page width of 100 characters and a ribbon width of 40 characters.

 main :: IO ()
 main = do{ putDoc (text "hello" <+> text "world") }

Which would output

 hello world

hPutDoc :: Handle -> Doc -> IO ()Source

(hPutDoc handle doc) pretty prints document doc to the file handle handle with a page width of 100 characters and a ribbon width of 40 characters.

 main = do handle <- 'openFile' "MyFile" 'WriteMode'
           'hPutDoc' handle ('vcat' ('map' 'text'
                           ['T.pack' "vertical", 'T.pack' "text"]))
           'hClose' handle