|Version 11 (modified by simonpj, 5 years ago)|
Material about the new code generator
This page summarises work that Norman Ramsey, Simon M, and Simon PJ are doing on re-architecting GHC's back end.
- Code generator: first draft done.
- Control-flow opt: simple ones done
- Common block elmination: to do
- Block concatenation: to do
- Adams optimisation: currently done somewhere but not modularly. I think.
- Proc-point analysis and transformation: done?
- Add spill/reload: done?
- Stack slot alloction?
- Make stack explicit: to do
- Split into multiple CmmProcs: to do
- New code to check invariants of output from ZipDataflow
- Finish debugging ZipDataflow
- Use Simon PJ's 'common-blockifier' to move the Adams optimization outside CmmProcProintZ
- ProcPointZ does not insert CopyOut nodes; this omission must be rectified and will require some general infrastructure for inserting predecessors.
- Simple optimizations on CopyIn and CopyOut may be required
- Define an interface for calling conventions and invariants for the output of frame layout [will require help from Simon M]
- Stack layout
- Glue the whole pipeline together and make sure it works.
Items 1-5 look like a few days apiece. Items 6 and 7 are more scary...
ToDo: main issues
- SRTs simply record live global variables. So we should use the same live-variable framework as for live local variables. That means we must be able to identify which globals are SRT-able. What about compression/encoding schemes?
- Draining the Rep swamp.
- How do we write continuations in the RTS? E.g. the update-frame continuation? Michael Adams had a syntax with two sets of parameters, the the ones on the stack and the return values.
- Review code gen for calls with lots of args. In the existing codegen we push magic continuations that say "apply the return value to N more args". Do we want to do this? ToDo: how rare is it to have too many args?
- Figure out how PAPs work. This may interact with the GC check and stack check at the start of a function call.
- How do stack overflow checks work? (They are inserted by the CPS conversion, and must not generate a new info table etc.)
- Was there something about sinking spills and hoisting reloads?
ToDo: small issues
- Shall we rename Branch to GoTo?!
- Where is the "push new continuation" middle node?
- Change the C-- parser (which parses RTS .cmm files) to directly construct CmmGraph.
- (SLPJ) See let-no-escape todos in StgCmmExpr.
The new Cmm data type
There is a new Cmm data type:
- ZipCfg contains a generic zipper-based control-flow graph data type. It is generic in the sense that it's polymorphic in the type of middle nodes and last nodes of a block. (Middle nodes don't do control transfers; last nodes only do control transfers.) There are extensive notes at the start of the module.
The key types it defines are:
- Block identifiers: BlockId, BlockEnv, BlockSet
- Control-flow blocks: Block
- Control-flow graphs: Graph
- ZipDataFlow contains a generic framework for solving dataflow problems over ZipCfg.
- ZipCfgCmm instantiates ZipCfg for Cmm, by defining types Middle and Last and using these to instantiate the polymorphic fields of ZipCfg. It also defines a bunch of smart constructor (mkJump, mkAssign, mkCmmIfThenElse etc) which make it easy to build CmmGraph.
- CmmExpr contains the data types for Cmm expressions, registers, and the like. It does not depend on the dataflow framework at all.
- Code generator converts STG to CmmGraph. Implemented in StgCmm* modules (in directory codeGen).
- Simple control flow optimisation, implemented in CmmContFlowOpt:
- Branch chain elimination
- Remove unreachable blocks
- TODO: block concatenation. branch to K; and this is the only use of K.
- Consider: block duplication. branch to K; and K is a short block. Branch chain elimination is just a special case of this.
- TODO: Common block elimination (like CSE). This makes something else significantly simpler. (ToDo: what?).
- The Adams optimisation. Given:
call f returns to K K: CopyIn retvals; goto L L: <code>transform to
call f returns to L L : CopyIn retvals; <code>and move CopyOut into L's other predecessors. ToDo: explain why this is a good thing.
- Proc-point analysis and transformation, implemented in CmmProcPointZ. (Adams version is CmmProcPoint.) The transfomation part adds a CopyIn to the front of each proc-point, which expresses the idea that proc-points use a standard entry convention.
- Add spill/reload, implemented in CmmSpillReload, to spill live C-- variables before a call and reload them afterwards. The middle node of the result is Middle (from ZipCfgCmm extended with Spill and Reload constructors. Invariant: (something like) all variables in a block are gotten from CopyIn or Reload.
- Stack slot layout. Build inteference graph for variables live across calls, and allocate a stack slot for such variables. That is, stack slot allocation is very like register allocation.
- Make the stack explicit.
- Convert CopyIn, CopyOut, Spill, Reload to hardware-register and stack traffic.
- Add stack-pointer adjustment instructions.
- Avoid memory traffic at joins. (What does this mean?)
- Split into multiple CmmProcs.
- Garbage collector entry points: see Note [Heap checks] in StgCmmHeapery.
- Update frames and exception handling. Also STM frames.
- Primitives can be rewritten:
- Use parameters
- In a few cases, use native calls (notably eval)
The Rep swamp
I have completed a major representation change, affecting both old and new code generators, of the various Rep types. It's pervasive in that it touches a lot of files; and in the native code-gen very many lines are changed. The new situation is much cleaner.
Here are the highlights of the new design.
There is a new type CmmType, defined in module CmmExpr, which is just what it sounds like: it's the type of a CmmExpr or a CmmReg.
- A CmmType is abstract: its representation is private to CmmExpr. That makes it easy to change representation.
- A CmmType is actually just a pair of a Width and a category (CmmCat).
- The Width type is exported and widely used in pattern-matching, but it does what it says on the tin: width only.
- In contrast, the CmmCat type is entirely private to CmmExpr. It is just an enumeration that allows us to distinguish: floats, gc pointers, and other.
Other important points are these:
- Each LocalReg has a CmmType attached; this replaces the previous unsavoury combination of MachRep and CmmKind. Indeed, both of the latter are gone entirely.
- Notice that a CmmType accurately knows about gc-pointer-hood. Ultimately we will abandon static-reference-table generation in STG syntax, and instead generate SRTs from the Cmm code. We'll need to update the RTS .cmm files to declare pointer-hood.
- The type TyCon.PrimRep remains; it enumerates the representations that a Haskell value can take. Differences from CmmType:
- PrimRep contains VoidRep, but CmmType has no zero-width form.
- CmmType includes sub-word width values (e.g. 8-bit) which PrimRep does not. The function primRepCmmType converts a non-void PrimRep to a CmmType.
The MachOp type enumerates (in machine-independent form) the available machine instructions. The principle they embody is that everything except the width is embodied in the opcode. In particular, we have
- MO_S_Lt, MO_U_Lt, and MO_F_Lt for comparison (signed, unsigned, and float).
- MO_SS_Conv, MO_SF_Conv etc, for conversion (SS is signed-to-signed, SF is signed-to-float, etc).
These constructor all take Width arguments.
The MachOp data type is defined in CmmExpr, not in a separate MachOp module.
Foreign calls and hints
In the new Cmm representation (ZipCfgCmmRep), but not the old one, arguments and results to all calls, including foreign ones, are ordinary CmmExpr or CmmReg respectively. The extra information we need for foreign calls (is this signed? is this an address?) are kept in the calling convention. Specifically:
- MidUnsafeCall calls a MidCallTarget
- MidCallTarget is either a CallishMachOp or a ForeignTarget
- In the latter case we supply a CmmExpr (the function to call) and a ForeignConvention
- A ForeignConvention contains the C calling convention (stdcall, ccall etc), and a list of ForiegnHints for arguments and for results. (We might want to rename this type.)
This simple change was horribly pervasive. The old Cmm rep (and Michael Adams's stuff) still has arguments and results being (argument,hint) pairs, as before.
Native code generation and the Size type
The native code generator has an instruction data type for each architecture. Many of the instructions in these data types used to have a MachRep argument, but now have a Size argument instead. In fact, so far as the native code generators are concerned, these Size types (which can be machine-specific) are simply a plug-in replacement for MachRep, with one big difference: Size is completely local to the native code generator and hence can be changed at will without affecting the rest of the compiler.
Size is badly named, but I inherited the name from the previous code.
I rather think that many instructions should have a Width parameter, not a Size parameter. But I didn't feel confident to change this. Generally speaking the NCG is a huge swamp and needs re-factoring.