-- Hoogle documentation, generated by Haddock -- See Hoogle, http://www.haskell.org/hoogle/ -- | Amazon CodeBuild SDK. -- -- The types from this library are intended to be used with -- amazonka, which provides mechanisms for specifying AuthN/AuthZ -- information, sending requests, and receiving responses. -- -- Lenses are used for constructing and manipulating types, due to the -- depth of nesting of AWS types and transparency regarding -- de/serialisation into more palatable Haskell values. The provided -- lenses should be compatible with any of the major lens libraries such -- as lens or lens-family-core. -- -- See Network.AWS.CodeBuild or the AWS documentation to -- get started. @package amazonka-codebuild @version 1.5.0 module Network.AWS.CodeBuild.Types -- | API version 2016-10-06 of the Amazon CodeBuild SDK -- configuration. codeBuild :: Service -- | The specified AWS resource cannot be created, because an AWS resource -- with the same settings already exists. _ResourceAlreadyExistsException :: AsError a => Getting (First ServiceError) a ServiceError -- | There was a problem with the underlying OAuth provider. _OAuthProviderException :: AsError a => Getting (First ServiceError) a ServiceError -- | An AWS service limit was exceeded for the calling AWS account. _AccountLimitExceededException :: AsError a => Getting (First ServiceError) a ServiceError -- | The input value that was provided is not valid. _InvalidInputException :: AsError a => Getting (First ServiceError) a ServiceError -- | The specified AWS resource cannot be found. _ResourceNotFoundException :: AsError a => Getting (First ServiceError) a ServiceError data ArtifactNamespace ANBuildId :: ArtifactNamespace ANNone :: ArtifactNamespace data ArtifactPackaging None :: ArtifactPackaging Zip :: ArtifactPackaging data ArtifactsType Codepipeline :: ArtifactsType NoArtifacts :: ArtifactsType S3 :: ArtifactsType data BuildPhaseType Build :: BuildPhaseType Completed :: BuildPhaseType DownloadSource :: BuildPhaseType Finalizing :: BuildPhaseType Install :: BuildPhaseType PostBuild :: BuildPhaseType PreBuild :: BuildPhaseType Provisioning :: BuildPhaseType Submitted :: BuildPhaseType UploadArtifacts :: BuildPhaseType data ComputeType BuildGENERAL1Large :: ComputeType BuildGENERAL1Medium :: ComputeType BuildGENERAL1Small :: ComputeType data EnvironmentType LinuxContainer :: EnvironmentType data EnvironmentVariableType ParameterStore :: EnvironmentVariableType Plaintext :: EnvironmentVariableType data LanguageType Android :: LanguageType Base :: LanguageType Docker :: LanguageType Dotnet :: LanguageType Golang :: LanguageType Java :: LanguageType NodeJs :: LanguageType Python :: LanguageType Ruby :: LanguageType data PlatformType AmazonLinux :: PlatformType Debian :: PlatformType Ubuntu :: PlatformType data ProjectSortByType CreatedTime :: ProjectSortByType LastModifiedTime :: ProjectSortByType Name :: ProjectSortByType data SortOrderType Ascending :: SortOrderType Descending :: SortOrderType data SourceAuthType Oauth :: SourceAuthType data SourceType STBitbucket :: SourceType STCodecommit :: SourceType STCodepipeline :: SourceType STGithub :: SourceType STS3 :: SourceType data StatusType Failed :: StatusType Fault :: StatusType InProgress :: StatusType Stopped :: StatusType Succeeded :: StatusType TimedOut :: StatusType -- | Information about a build. -- -- See: build smart constructor. data Build -- | Creates a value of Build with the minimum fields required to -- make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- build :: Build -- | Information about all previous build phases that are completed and -- information about any current build phase that is not yet complete. bPhases :: Lens' Build [BuildPhase] -- | Whether the build has finished. True if completed; otherwise, false. bBuildComplete :: Lens' Build (Maybe Bool) -- | The Amazon Resource Name (ARN) of the build. bArn :: Lens' Build (Maybe Text) -- | When the build process started, expressed in Unix time format. bStartTime :: Lens' Build (Maybe UTCTime) -- | Information about the output artifacts for the build. bArtifacts :: Lens' Build (Maybe BuildArtifacts) -- | Information about the build environment for this build. bEnvironment :: Lens' Build (Maybe ProjectEnvironment) -- | The entity that started the build. Valid values include: * If AWS -- CodePipeline started the build, the pipeline's name (for example, -- codepipeline/my-demo-pipeline ). * If an AWS Identity and -- Access Management (IAM) user started the build, the user's name (for -- example MyUserName ). * If the Jenkins plugin for AWS -- CodeBuild started the build, the string -- CodeBuild-Jenkins-Plugin . bInitiator :: Lens' Build (Maybe Text) -- | The current build phase. bCurrentPhase :: Lens' Build (Maybe Text) -- | Any version identifier for the version of the source code to be built. bSourceVersion :: Lens' Build (Maybe Text) -- | Information about the build's logs in Amazon CloudWatch Logs. bLogs :: Lens' Build (Maybe LogsLocation) -- | When the build process ended, expressed in Unix time format. bEndTime :: Lens' Build (Maybe UTCTime) -- | The name of the build project. bProjectName :: Lens' Build (Maybe Text) -- | The current status of the build. Valid values include: * -- FAILED : The build failed. * FAULT : The build -- faulted. * IN_PROGRESS : The build is still in progress. * -- STOPPED : The build stopped. * SUCCEEDED : The build -- succeeded. * TIMED_OUT : The build timed out. bBuildStatus :: Lens' Build (Maybe StatusType) -- | Information about the source code to be built. bSource :: Lens' Build (Maybe ProjectSource) -- | The unique ID for the build. bId :: Lens' Build (Maybe Text) -- | How long, in minutes, for AWS CodeBuild to wait before timing out this -- build if it does not get marked as completed. bTimeoutInMinutes :: Lens' Build (Maybe Int) -- | Information about build output artifacts. -- -- See: buildArtifacts smart constructor. data BuildArtifacts -- | Creates a value of BuildArtifacts with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- buildArtifacts :: BuildArtifacts -- | Information about the location of the build artifacts. baLocation :: Lens' BuildArtifacts (Maybe Text) -- | The MD5 hash of the build artifact. You can use this hash along with a -- checksum tool to confirm both file integrity and authenticity. baMd5sum :: Lens' BuildArtifacts (Maybe Text) -- | The SHA-256 hash of the build artifact. You can use this hash along -- with a checksum tool to confirm both file integrity and authenticity. baSha256sum :: Lens' BuildArtifacts (Maybe Text) -- | Information about a build that could not be successfully deleted. -- -- See: buildNotDeleted smart constructor. data BuildNotDeleted -- | Creates a value of BuildNotDeleted with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- buildNotDeleted :: BuildNotDeleted -- | The ID of the build that could not be successfully deleted. bndId :: Lens' BuildNotDeleted (Maybe Text) -- | Additional information about the build that could not be successfully -- deleted. bndStatusCode :: Lens' BuildNotDeleted (Maybe Text) -- | Information about a stage for a build. -- -- See: buildPhase smart constructor. data BuildPhase -- | Creates a value of BuildPhase with the minimum fields required -- to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- buildPhase :: BuildPhase -- | Additional information about a build phase, especially to help -- troubleshoot a failed build. bpContexts :: Lens' BuildPhase [PhaseContext] -- | When the build phase started, expressed in Unix time format. bpStartTime :: Lens' BuildPhase (Maybe UTCTime) -- | The current status of the build phase. Valid values include: * -- FAILED : The build phase failed. * FAULT : The build -- phase faulted. * IN_PROGRESS : The build phase is still in -- progress. * STOPPED : The build phase stopped. * -- SUCCEEDED : The build phase succeeded. * TIMED_OUT : -- The build phase timed out. bpPhaseStatus :: Lens' BuildPhase (Maybe StatusType) -- | The name of the build phase. Valid values include: * BUILD : -- Core build activities typically occur in this build phase. * -- COMPLETED : The build has been completed. * -- DOWNLOAD_SOURCE : Source code is being downloaded in this -- build phase. * FINALIZING : The build process is completing -- in this build phase. * INSTALL : Installation activities -- typically occur in this build phase. * POST_BUILD : -- Post-build activities typically occur in this build phase. * -- PRE_BUILD : Pre-build activities typically occur in this -- build phase. * PROVISIONING : The build environment is being -- set up. * SUBMITTED : The build has been submitted. * -- UPLOAD_ARTIFACTS : Build output artifacts are being uploaded -- to the output location. bpPhaseType :: Lens' BuildPhase (Maybe BuildPhaseType) -- | When the build phase ended, expressed in Unix time format. bpEndTime :: Lens' BuildPhase (Maybe UTCTime) -- | How long, in seconds, between the starting and ending times of the -- build's phase. bpDurationInSeconds :: Lens' BuildPhase (Maybe Integer) -- | Information about a Docker image that is managed by AWS CodeBuild. -- -- See: environmentImage smart constructor. data EnvironmentImage -- | Creates a value of EnvironmentImage with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentImage :: EnvironmentImage -- | The name of the Docker image. eiName :: Lens' EnvironmentImage (Maybe Text) -- | The description of the Docker image. eiDescription :: Lens' EnvironmentImage (Maybe Text) -- | A set of Docker images that are related by programming language and -- are managed by AWS CodeBuild. -- -- See: environmentLanguage smart constructor. data EnvironmentLanguage -- | Creates a value of EnvironmentLanguage with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentLanguage :: EnvironmentLanguage -- | The list of Docker images that are related by the specified -- programming language. elImages :: Lens' EnvironmentLanguage [EnvironmentImage] -- | The programming language for the Docker images. elLanguage :: Lens' EnvironmentLanguage (Maybe LanguageType) -- | A set of Docker images that are related by platform and are managed by -- AWS CodeBuild. -- -- See: environmentPlatform smart constructor. data EnvironmentPlatform -- | Creates a value of EnvironmentPlatform with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentPlatform :: EnvironmentPlatform -- | The platform's name. epPlatform :: Lens' EnvironmentPlatform (Maybe PlatformType) -- | The list of programming languages that are available for the specified -- platform. epLanguages :: Lens' EnvironmentPlatform [EnvironmentLanguage] -- | Information about an environment variable for a build project or a -- build. -- -- See: environmentVariable smart constructor. data EnvironmentVariable -- | Creates a value of EnvironmentVariable with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentVariable :: Text -> Text -> EnvironmentVariable -- | The type of environment variable. Valid values include: * -- PARAMETER_STORE : An environment variable stored in Amazon -- EC2 Systems Manager Parameter Store. * PLAINTEXT : An -- environment variable in plaintext format. evType :: Lens' EnvironmentVariable (Maybe EnvironmentVariableType) -- | The name or key of the environment variable. evName :: Lens' EnvironmentVariable Text -- | The value of the environment variable. Important: We strongly -- discourage using environment variables to store sensitive values, -- especially AWS secret key IDs and secret access keys. Environment -- variables can be displayed in plain text using tools such as the AWS -- CodeBuild console and the AWS Command Line Interface (AWS CLI). evValue :: Lens' EnvironmentVariable Text -- | Information about build logs in Amazon CloudWatch Logs. -- -- See: logsLocation smart constructor. data LogsLocation -- | Creates a value of LogsLocation with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- logsLocation :: LogsLocation -- | The URL to an individual build log in Amazon CloudWatch Logs. llDeepLink :: Lens' LogsLocation (Maybe Text) -- | The name of the Amazon CloudWatch Logs group for the build logs. llGroupName :: Lens' LogsLocation (Maybe Text) -- | The name of the Amazon CloudWatch Logs stream for the build logs. llStreamName :: Lens' LogsLocation (Maybe Text) -- | Additional information about a build phase that has an error. You can -- use this information to help troubleshoot a failed build. -- -- See: phaseContext smart constructor. data PhaseContext -- | Creates a value of PhaseContext with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- phaseContext :: PhaseContext -- | An explanation of the build phase's context. This explanation might -- include a command ID and an exit code. pcMessage :: Lens' PhaseContext (Maybe Text) -- | The status code for the context of the build phase. pcStatusCode :: Lens' PhaseContext (Maybe Text) -- | Information about a build project. -- -- See: project smart constructor. data Project -- | Creates a value of Project with the minimum fields required to -- make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- project :: Project -- | The Amazon Resource Name (ARN) of the build project. pArn :: Lens' Project (Maybe Text) -- | Information about the build output artifacts for the build project. pArtifacts :: Lens' Project (Maybe ProjectArtifacts) -- | Information about the build environment for this build project. pEnvironment :: Lens' Project (Maybe ProjectEnvironment) -- | When the build project was created, expressed in Unix time format. pCreated :: Lens' Project (Maybe UTCTime) -- | The name of the build project. pName :: Lens' Project (Maybe Text) -- | Information about the build input source code for this build project. pSource :: Lens' Project (Maybe ProjectSource) -- | The AWS Key Management Service (AWS KMS) customer master key (CMK) to -- be used for encrypting the build output artifacts. This is expressed -- either as the CMK's Amazon Resource Name (ARN) or, if specified, the -- CMK's alias (using the format alias/alias-name ). pEncryptionKey :: Lens' Project (Maybe Text) -- | When the build project's settings were last modified, expressed in -- Unix time format. pLastModified :: Lens' Project (Maybe UTCTime) -- | Information about a webhook in GitHub that connects repository events -- to a build project in AWS CodeBuild. pWebhook :: Lens' Project (Maybe Webhook) -- | A description that makes the build project easy to identify. pDescription :: Lens' Project (Maybe Text) -- | The ARN of the AWS Identity and Access Management (IAM) role that -- enables AWS CodeBuild to interact with dependent AWS services on -- behalf of the AWS account. pServiceRole :: Lens' Project (Maybe Text) -- | The tags for this build project. These tags are available for use by -- AWS services that support AWS CodeBuild build project tags. pTags :: Lens' Project [Tag] -- | How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to -- wait before timing out any related build that did not get marked as -- completed. The default is 60 minutes. pTimeoutInMinutes :: Lens' Project (Maybe Natural) -- | Information about the build output artifacts for the build project. -- -- See: projectArtifacts smart constructor. data ProjectArtifacts -- | Creates a value of ProjectArtifacts with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- projectArtifacts :: ArtifactsType -> ProjectArtifacts -- | The type of build output artifact to create, as follows: * If -- type is set to CODEPIPELINE , then AWS CodePipeline -- will ignore this value if specified. This is because AWS CodePipeline -- manages its build output artifacts instead of AWS CodeBuild. * If -- type is set to NO_ARTIFACTS , then this value will -- be ignored if specified, because no build output will be produced. * -- If type is set to S3 , valid values include: * -- NONE : AWS CodeBuild will create in the output bucket a -- folder containing the build output. This is the default if -- packaging is not specified. * ZIP : AWS CodeBuild -- will create in the output bucket a ZIP file containing the build -- output. paPackaging :: Lens' ProjectArtifacts (Maybe ArtifactPackaging) -- | Along with namespaceType and name , the pattern that -- AWS CodeBuild will use to name and store the output artifact, as -- follows: * If type is set to CODEPIPELINE , then AWS -- CodePipeline will ignore this value if specified. This is because AWS -- CodePipeline manages its build output names instead of AWS CodeBuild. -- * If type is set to NO_ARTIFACTS , then this value -- will be ignored if specified, because no build output will be -- produced. * If type is set to S3 , this is the path -- to the output artifact. If path is not specified, then -- path will not be used. For example, if path is set -- to MyArtifacts , namespaceType is set to -- NONE , and name is set to MyArtifact.zip , -- then the output artifact would be stored in the output bucket at -- MyArtifacts/MyArtifact.zip . paPath :: Lens' ProjectArtifacts (Maybe Text) -- | Information about the build output artifact location, as follows: * If -- type is set to CODEPIPELINE , then AWS CodePipeline -- will ignore this value if specified. This is because AWS CodePipeline -- manages its build output locations instead of AWS CodeBuild. * If -- type is set to NO_ARTIFACTS , then this value will -- be ignored if specified, because no build output will be produced. * -- If type is set to S3 , this is the name of the -- output bucket. paLocation :: Lens' ProjectArtifacts (Maybe Text) -- | Along with path and namespaceType , the pattern that -- AWS CodeBuild will use to name and store the output artifact, as -- follows: * If type is set to CODEPIPELINE , then AWS -- CodePipeline will ignore this value if specified. This is because AWS -- CodePipeline manages its build output names instead of AWS CodeBuild. -- * If type is set to NO_ARTIFACTS , then this value -- will be ignored if specified, because no build output will be -- produced. * If type is set to S3 , this is the name -- of the output artifact object. For example, if path is set to -- MyArtifacts , namespaceType is set to -- BUILD_ID , and name is set to -- MyArtifact.zip , then the output artifact would be stored in -- MyArtifacts/build-ID /MyArtifact.zip . paName :: Lens' ProjectArtifacts (Maybe Text) -- | Along with path and name , the pattern that AWS -- CodeBuild will use to determine the name and location to store the -- output artifact, as follows: * If type is set to -- CODEPIPELINE , then AWS CodePipeline will ignore this value -- if specified. This is because AWS CodePipeline manages its build -- output names instead of AWS CodeBuild. * If type is set to -- NO_ARTIFACTS , then this value will be ignored if specified, -- because no build output will be produced. * If type is set to -- S3 , then valid values include: * BUILD_ID : Include -- the build ID in the location of the build output artifact. * -- NONE : Do not include the build ID. This is the default if -- namespaceType is not specified. For example, if path -- is set to MyArtifacts , namespaceType is set to -- BUILD_ID , and name is set to -- MyArtifact.zip , then the output artifact would be stored in -- MyArtifacts/build-ID /MyArtifact.zip . paNamespaceType :: Lens' ProjectArtifacts (Maybe ArtifactNamespace) -- | The type of build output artifact. Valid values include: * -- CODEPIPELINE : The build project will have build output -- generated through AWS CodePipeline. * NO_ARTIFACTS : The -- build project will not produce any build output. * S3 : The -- build project will store build output in Amazon Simple Storage Service -- (Amazon S3). paType :: Lens' ProjectArtifacts ArtifactsType -- | Information about the build environment of the build project. -- -- See: projectEnvironment smart constructor. data ProjectEnvironment -- | Creates a value of ProjectEnvironment with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- projectEnvironment :: EnvironmentType -> Text -> ComputeType -> ProjectEnvironment -- | If set to true, enables running the Docker daemon inside a Docker -- container; otherwise, false or not specified (the default). This value -- must be set to true only if this build project will be used to build -- Docker images, and the specified build environment image is not one -- provided by AWS CodeBuild with Docker support. Otherwise, all -- associated builds that attempt to interact with the Docker daemon will -- fail. Note that you must also start the Docker daemon so that your -- builds can interact with it as needed. One way to do this is to -- initialize the Docker daemon in the install phase of your build spec -- by running the following build commands. (Do not run the following -- build commands if the specified build environment image is provided by -- AWS CodeBuild with Docker support.) - nohup -- usrlocalbindockerd -- --host=unix://varrundocker.sock --host=tcp:/0.0.0.0:2375 -- --storage-driver=overlay& - timeout -t 15 sh -c "until docker -- info; do echo .; sleep 1; done" pePrivilegedMode :: Lens' ProjectEnvironment (Maybe Bool) -- | A set of environment variables to make available to builds for this -- build project. peEnvironmentVariables :: Lens' ProjectEnvironment [EnvironmentVariable] -- | The type of build environment to use for related builds. peType :: Lens' ProjectEnvironment EnvironmentType -- | The ID of the Docker image to use for this build project. peImage :: Lens' ProjectEnvironment Text -- | Information about the compute resources the build project will use. -- Available values include: * BUILD_GENERAL1_SMALL : Use up to -- 3 GB memory and 2 vCPUs for builds. * BUILD_GENERAL1_MEDIUM : -- Use up to 7 GB memory and 4 vCPUs for builds. * -- BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for -- builds. peComputeType :: Lens' ProjectEnvironment ComputeType -- | Information about the build input source code for the build project. -- -- See: projectSource smart constructor. data ProjectSource -- | Creates a value of ProjectSource with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- projectSource :: SourceType -> ProjectSource -- | Information about the location of the source code to be built. Valid -- values include: * For source code settings that are specified in the -- source action of a pipeline in AWS CodePipeline, location -- should not be specified. If it is specified, AWS CodePipeline will -- ignore it. This is because AWS CodePipeline uses the settings in a -- pipeline's source action instead of this value. * For source code in -- an AWS CodeCommit repository, the HTTPS clone URL to the repository -- that contains the source code and the build spec (for example, -- https://git-codecommit./region-ID/ -- .amazonaws.comv1repos/repo-name ). * For source -- code in an Amazon Simple Storage Service (Amazon S3) input bucket, the -- path to the ZIP file that contains the source code (for example, -- bucket-name /path /to /object-name -- .zip ) * For source code in a GitHub repository, the HTTPS clone -- URL to the repository that contains the source and the build spec. -- Also, you must connect your AWS account to your GitHub account. To do -- this, use the AWS CodeBuild console to begin creating a build project. -- When you use the console to connect (or reconnect) with GitHub, on the -- GitHub Authorize application page that displays, for -- Organization access , choose Request access next to each -- repository you want to allow AWS CodeBuild to have access to. Then -- choose Authorize application . (After you have connected to -- your GitHub account, you do not need to finish creating the build -- project, and you may then leave the AWS CodeBuild console.) To -- instruct AWS CodeBuild to then use this connection, in the -- source object, set the auth object's type -- value to OAUTH . * For source code in a Bitbucket repository, -- the HTTPS clone URL to the repository that contains the source and the -- build spec. Also, you must connect your AWS account to your Bitbucket -- account. To do this, use the AWS CodeBuild console to begin creating a -- build project. When you use the console to connect (or reconnect) with -- Bitbucket, on the Bitbucket Confirm access to your account page -- that displays, choose Grant access . (After you have connected -- to your Bitbucket account, you do not need to finish creating the -- build project, and you may then leave the AWS CodeBuild console.) To -- instruct AWS CodeBuild to then use this connection, in the -- source object, set the auth object's type -- value to OAUTH . psLocation :: Lens' ProjectSource (Maybe Text) -- | Information about the authorization settings for AWS CodeBuild to -- access the source code to be built. This information is for the AWS -- CodeBuild console's use only. Your code should not get or set this -- information directly (unless the build project's source type -- value is BITBUCKET or GITHUB ). psAuth :: Lens' ProjectSource (Maybe SourceAuth) -- | The build spec declaration to use for the builds in this build -- project. If this value is not specified, a build spec must be included -- along with the source code to be built. psBuildspec :: Lens' ProjectSource (Maybe Text) -- | The type of repository that contains the source code to be built. -- Valid values include: * BITBUCKET : The source code is in a -- Bitbucket repository. * CODECOMMIT : The source code is in an -- AWS CodeCommit repository. * CODEPIPELINE : The source code -- settings are specified in the source action of a pipeline in AWS -- CodePipeline. * GITHUB : The source code is in a GitHub -- repository. * S3 : The source code is in an Amazon Simple -- Storage Service (Amazon S3) input bucket. psType :: Lens' ProjectSource SourceType -- | Information about the authorization settings for AWS CodeBuild to -- access the source code to be built. -- -- This information is for the AWS CodeBuild console's use only. Your -- code should not get or set this information directly (unless the build -- project's source type value is BITBUCKET or -- GITHUB ). -- -- See: sourceAuth smart constructor. data SourceAuth -- | Creates a value of SourceAuth with the minimum fields required -- to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- sourceAuth :: SourceAuthType -> SourceAuth -- | The resource value that applies to the specified authorization type. saResource :: Lens' SourceAuth (Maybe Text) -- | The authorization type to use. The only valid value is OAUTH -- , which represents the OAuth authorization type. saType :: Lens' SourceAuth SourceAuthType -- | A tag, consisting of a key and a value. -- -- This tag is available for use by AWS services that support tags in AWS -- CodeBuild. -- -- See: tag smart constructor. data Tag -- | Creates a value of Tag with the minimum fields required to make -- a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- tag :: Tag -- | The tag's value. tagValue :: Lens' Tag (Maybe Text) -- | The tag's key. tagKey :: Lens' Tag (Maybe Text) -- | Information about a webhook in GitHub that connects repository events -- to a build project in AWS CodeBuild. -- -- See: webhook smart constructor. data Webhook -- | Creates a value of Webhook with the minimum fields required to -- make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- webhook :: Webhook -- | The URL to the webhook. wUrl :: Lens' Webhook (Maybe Text) -- | Changes the settings of a build project. module Network.AWS.CodeBuild.UpdateProject -- | Creates a value of UpdateProject with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- updateProject :: Text -> UpdateProject -- | See: updateProject smart constructor. data UpdateProject -- | Information to be changed about the build output artifacts for the -- build project. upArtifacts :: Lens' UpdateProject (Maybe ProjectArtifacts) -- | Information to be changed about the build environment for the build -- project. upEnvironment :: Lens' UpdateProject (Maybe ProjectEnvironment) -- | Information to be changed about the build input source code for the -- build project. upSource :: Lens' UpdateProject (Maybe ProjectSource) -- | The replacement AWS Key Management Service (AWS KMS) customer master -- key (CMK) to be used for encrypting the build output artifacts. You -- can specify either the CMK's Amazon Resource Name (ARN) or, if -- available, the CMK's alias (using the format -- alias/alias-name ). upEncryptionKey :: Lens' UpdateProject (Maybe Text) -- | A new or replacement description of the build project. upDescription :: Lens' UpdateProject (Maybe Text) -- | The replacement ARN of the AWS Identity and Access Management (IAM) -- role that enables AWS CodeBuild to interact with dependent AWS -- services on behalf of the AWS account. upServiceRole :: Lens' UpdateProject (Maybe Text) -- | The replacement set of tags for this build project. These tags are -- available for use by AWS services that support AWS CodeBuild build -- project tags. upTags :: Lens' UpdateProject [Tag] -- | The replacement value in minutes, from 5 to 480 (8 hours), for AWS -- CodeBuild to wait before timing out any related build that did not get -- marked as completed. upTimeoutInMinutes :: Lens' UpdateProject (Maybe Natural) -- | The name of the build project. upName :: Lens' UpdateProject Text -- | Creates a value of UpdateProjectResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- updateProjectResponse :: Int -> UpdateProjectResponse -- | See: updateProjectResponse smart constructor. data UpdateProjectResponse -- | Information about the build project that was changed. uprsProject :: Lens' UpdateProjectResponse (Maybe Project) -- | uprsResponseStatus :: Lens' UpdateProjectResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.UpdateProject.UpdateProjectResponse instance Data.Data.Data Network.AWS.CodeBuild.UpdateProject.UpdateProjectResponse instance GHC.Show.Show Network.AWS.CodeBuild.UpdateProject.UpdateProjectResponse instance GHC.Read.Read Network.AWS.CodeBuild.UpdateProject.UpdateProjectResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.UpdateProject.UpdateProjectResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Data.Data.Data Network.AWS.CodeBuild.UpdateProject.UpdateProject instance GHC.Show.Show Network.AWS.CodeBuild.UpdateProject.UpdateProject instance GHC.Read.Read Network.AWS.CodeBuild.UpdateProject.UpdateProject instance GHC.Classes.Eq Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.UpdateProject.UpdateProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.UpdateProject.UpdateProjectResponse module Network.AWS.CodeBuild.Waiters -- | Attempts to stop running a build. module Network.AWS.CodeBuild.StopBuild -- | Creates a value of StopBuild with the minimum fields required -- to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- stopBuild :: Text -> StopBuild -- | See: stopBuild smart constructor. data StopBuild -- | The ID of the build. sbId :: Lens' StopBuild Text -- | Creates a value of StopBuildResponse with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- stopBuildResponse :: Int -> StopBuildResponse -- | See: stopBuildResponse smart constructor. data StopBuildResponse -- | Information about the build. sbrsBuild :: Lens' StopBuildResponse (Maybe Build) -- | sbrsResponseStatus :: Lens' StopBuildResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.StopBuild.StopBuildResponse instance Data.Data.Data Network.AWS.CodeBuild.StopBuild.StopBuildResponse instance GHC.Show.Show Network.AWS.CodeBuild.StopBuild.StopBuildResponse instance GHC.Read.Read Network.AWS.CodeBuild.StopBuild.StopBuildResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.StopBuild.StopBuildResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.StopBuild.StopBuild instance Data.Data.Data Network.AWS.CodeBuild.StopBuild.StopBuild instance GHC.Show.Show Network.AWS.CodeBuild.StopBuild.StopBuild instance GHC.Read.Read Network.AWS.CodeBuild.StopBuild.StopBuild instance GHC.Classes.Eq Network.AWS.CodeBuild.StopBuild.StopBuild instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.StopBuild.StopBuild instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.StopBuild.StopBuild instance Control.DeepSeq.NFData Network.AWS.CodeBuild.StopBuild.StopBuild instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.StopBuild.StopBuild instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.StopBuild.StopBuild instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.StopBuild.StopBuild instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.StopBuild.StopBuild instance Control.DeepSeq.NFData Network.AWS.CodeBuild.StopBuild.StopBuildResponse -- | Starts running a build. module Network.AWS.CodeBuild.StartBuild -- | Creates a value of StartBuild with the minimum fields required -- to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- startBuild :: Text -> StartBuild -- | See: startBuild smart constructor. data StartBuild -- | A set of environment variables that overrides, for this build only, -- the latest ones already defined in the build project. sbEnvironmentVariablesOverride :: Lens' StartBuild [EnvironmentVariable] -- | The number of build timeout minutes, from 5 to 480 (8 hours), that -- overrides, for this build only, the latest setting already defined in -- the build project. sbTimeoutInMinutesOverride :: Lens' StartBuild (Maybe Natural) -- | A version of the build input to be built, for this build only. If not -- specified, the latest version will be used. If specified, must be one -- of: * For AWS CodeCommit: the commit ID to use. * For GitHub: the -- commit ID, pull request ID, branch name, or tag name that corresponds -- to the version of the source code you want to build. If a pull request -- ID is specified, it must use the format pr/pull-request-ID -- (for example pr/25 ). If a branch name is specified, the -- branch's HEAD commit ID will be used. If not specified, the default -- branch's HEAD commit ID will be used. * For Bitbucket: the commit ID, -- branch name, or tag name that corresponds to the version of the source -- code you want to build. If a branch name is specified, the branch's -- HEAD commit ID will be used. If not specified, the default branch's -- HEAD commit ID will be used. * For Amazon Simple Storage Service -- (Amazon S3): the version ID of the object representing the build input -- ZIP file to use. sbSourceVersion :: Lens' StartBuild (Maybe Text) -- | A build spec declaration that overrides, for this build only, the -- latest one already defined in the build project. sbBuildspecOverride :: Lens' StartBuild (Maybe Text) -- | Build output artifact settings that override, for this build only, the -- latest ones already defined in the build project. sbArtifactsOverride :: Lens' StartBuild (Maybe ProjectArtifacts) -- | The name of the build project to start running a build. sbProjectName :: Lens' StartBuild Text -- | Creates a value of StartBuildResponse with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- startBuildResponse :: Int -> StartBuildResponse -- | See: startBuildResponse smart constructor. data StartBuildResponse -- | Information about the build to be run. srsBuild :: Lens' StartBuildResponse (Maybe Build) -- | srsResponseStatus :: Lens' StartBuildResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.StartBuild.StartBuildResponse instance Data.Data.Data Network.AWS.CodeBuild.StartBuild.StartBuildResponse instance GHC.Show.Show Network.AWS.CodeBuild.StartBuild.StartBuildResponse instance GHC.Read.Read Network.AWS.CodeBuild.StartBuild.StartBuildResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.StartBuild.StartBuildResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.StartBuild.StartBuild instance Data.Data.Data Network.AWS.CodeBuild.StartBuild.StartBuild instance GHC.Show.Show Network.AWS.CodeBuild.StartBuild.StartBuild instance GHC.Read.Read Network.AWS.CodeBuild.StartBuild.StartBuild instance GHC.Classes.Eq Network.AWS.CodeBuild.StartBuild.StartBuild instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.StartBuild.StartBuild instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.StartBuild.StartBuild instance Control.DeepSeq.NFData Network.AWS.CodeBuild.StartBuild.StartBuild instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.StartBuild.StartBuild instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.StartBuild.StartBuild instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.StartBuild.StartBuild instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.StartBuild.StartBuild instance Control.DeepSeq.NFData Network.AWS.CodeBuild.StartBuild.StartBuildResponse -- | Gets a list of build project names, with each build project name -- representing a single build project. -- -- This operation returns paginated results. module Network.AWS.CodeBuild.ListProjects -- | Creates a value of ListProjects with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- listProjects :: ListProjects -- | See: listProjects smart constructor. data ListProjects -- | The order in which to list build projects. Valid values include: * -- ASCENDING : List the build project names in ascending order. -- * DESCENDING : List the build project names in descending -- order. Use sortBy to specify the criterion to be used to list -- build project names. lpSortOrder :: Lens' ListProjects (Maybe SortOrderType) -- | During a previous call, if there are more than 100 items in the list, -- only the first 100 items are returned, along with a unique string -- called a next token . To get the next batch of items in the -- list, call this operation again, adding the next token to the call. To -- get all of the items in the list, keep calling this operation with -- each subsequent next token that is returned, until no more next tokens -- are returned. lpNextToken :: Lens' ListProjects (Maybe Text) -- | The criterion to be used to list build project names. Valid values -- include: * CREATED_TIME : List the build project names based -- on when each build project was created. * LAST_MODIFIED_TIME -- : List the build project names based on when information about each -- build project was last changed. * NAME : List the build -- project names based on each build project's name. Use -- sortOrder to specify in what order to list the build project -- names based on the preceding criteria. lpSortBy :: Lens' ListProjects (Maybe ProjectSortByType) -- | Creates a value of ListProjectsResponse with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- listProjectsResponse :: Int -> ListProjectsResponse -- | See: listProjectsResponse smart constructor. data ListProjectsResponse -- | If there are more than 100 items in the list, only the first 100 items -- are returned, along with a unique string called a next token . -- To get the next batch of items in the list, call this operation again, -- adding the next token to the call. lprsNextToken :: Lens' ListProjectsResponse (Maybe Text) -- | The list of build project names, with each build project name -- representing a single build project. lprsProjects :: Lens' ListProjectsResponse (Maybe (NonEmpty Text)) -- | lprsResponseStatus :: Lens' ListProjectsResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.ListProjects.ListProjectsResponse instance Data.Data.Data Network.AWS.CodeBuild.ListProjects.ListProjectsResponse instance GHC.Show.Show Network.AWS.CodeBuild.ListProjects.ListProjectsResponse instance GHC.Read.Read Network.AWS.CodeBuild.ListProjects.ListProjectsResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.ListProjects.ListProjectsResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.ListProjects.ListProjects instance Data.Data.Data Network.AWS.CodeBuild.ListProjects.ListProjects instance GHC.Show.Show Network.AWS.CodeBuild.ListProjects.ListProjects instance GHC.Read.Read Network.AWS.CodeBuild.ListProjects.ListProjects instance GHC.Classes.Eq Network.AWS.CodeBuild.ListProjects.ListProjects instance Network.AWS.Pager.AWSPager Network.AWS.CodeBuild.ListProjects.ListProjects instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.ListProjects.ListProjects instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.ListProjects.ListProjects instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListProjects.ListProjects instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.ListProjects.ListProjects instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.ListProjects.ListProjects instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.ListProjects.ListProjects instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.ListProjects.ListProjects instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListProjects.ListProjectsResponse -- | Gets information about Docker images that are managed by AWS -- CodeBuild. module Network.AWS.CodeBuild.ListCuratedEnvironmentImages -- | Creates a value of ListCuratedEnvironmentImages with the -- minimum fields required to make a request. listCuratedEnvironmentImages :: ListCuratedEnvironmentImages -- | See: listCuratedEnvironmentImages smart constructor. data ListCuratedEnvironmentImages -- | Creates a value of ListCuratedEnvironmentImagesResponse with -- the minimum fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- listCuratedEnvironmentImagesResponse :: Int -> ListCuratedEnvironmentImagesResponse -- | See: listCuratedEnvironmentImagesResponse smart -- constructor. data ListCuratedEnvironmentImagesResponse -- | Information about supported platforms for Docker images that are -- managed by AWS CodeBuild. lceirsPlatforms :: Lens' ListCuratedEnvironmentImagesResponse [EnvironmentPlatform] -- | lceirsResponseStatus :: Lens' ListCuratedEnvironmentImagesResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImagesResponse instance Data.Data.Data Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImagesResponse instance GHC.Show.Show Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImagesResponse instance GHC.Read.Read Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImagesResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImagesResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Data.Data.Data Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance GHC.Show.Show Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance GHC.Read.Read Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance GHC.Classes.Eq Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImages instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListCuratedEnvironmentImages.ListCuratedEnvironmentImagesResponse -- | Gets a list of build IDs for the specified build project, with each -- build ID representing a single build. -- -- This operation returns paginated results. module Network.AWS.CodeBuild.ListBuildsForProject -- | Creates a value of ListBuildsForProject with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- listBuildsForProject :: Text -> ListBuildsForProject -- | See: listBuildsForProject smart constructor. data ListBuildsForProject -- | The order to list build IDs. Valid values include: * -- ASCENDING : List the build IDs in ascending order by build -- ID. * DESCENDING : List the build IDs in descending order by -- build ID. lbfpSortOrder :: Lens' ListBuildsForProject (Maybe SortOrderType) -- | During a previous call, if there are more than 100 items in the list, -- only the first 100 items are returned, along with a unique string -- called a next token . To get the next batch of items in the -- list, call this operation again, adding the next token to the call. To -- get all of the items in the list, keep calling this operation with -- each subsequent next token that is returned, until no more next tokens -- are returned. lbfpNextToken :: Lens' ListBuildsForProject (Maybe Text) -- | The name of the build project. lbfpProjectName :: Lens' ListBuildsForProject Text -- | Creates a value of ListBuildsForProjectResponse with the -- minimum fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- listBuildsForProjectResponse :: Int -> ListBuildsForProjectResponse -- | See: listBuildsForProjectResponse smart constructor. data ListBuildsForProjectResponse -- | A list of build IDs for the specified build project, with each build -- ID representing a single build. lbfprsIds :: Lens' ListBuildsForProjectResponse (Maybe (NonEmpty Text)) -- | If there are more than 100 items in the list, only the first 100 items -- are returned, along with a unique string called a next token . -- To get the next batch of items in the list, call this operation again, -- adding the next token to the call. lbfprsNextToken :: Lens' ListBuildsForProjectResponse (Maybe Text) -- | lbfprsResponseStatus :: Lens' ListBuildsForProjectResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProjectResponse instance Data.Data.Data Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProjectResponse instance GHC.Show.Show Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProjectResponse instance GHC.Read.Read Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProjectResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProjectResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Data.Data.Data Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance GHC.Show.Show Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance GHC.Read.Read Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance GHC.Classes.Eq Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Network.AWS.Pager.AWSPager Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListBuildsForProject.ListBuildsForProjectResponse -- | Gets a list of build IDs, with each build ID representing a single -- build. -- -- This operation returns paginated results. module Network.AWS.CodeBuild.ListBuilds -- | Creates a value of ListBuilds with the minimum fields required -- to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- listBuilds :: ListBuilds -- | See: listBuilds smart constructor. data ListBuilds -- | The order to list build IDs. Valid values include: * -- ASCENDING : List the build IDs in ascending order by build -- ID. * DESCENDING : List the build IDs in descending order by -- build ID. lbSortOrder :: Lens' ListBuilds (Maybe SortOrderType) -- | During a previous call, if there are more than 100 items in the list, -- only the first 100 items are returned, along with a unique string -- called a next token . To get the next batch of items in the -- list, call this operation again, adding the next token to the call. To -- get all of the items in the list, keep calling this operation with -- each subsequent next token that is returned, until no more next tokens -- are returned. lbNextToken :: Lens' ListBuilds (Maybe Text) -- | Creates a value of ListBuildsResponse with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- listBuildsResponse :: Int -> ListBuildsResponse -- | See: listBuildsResponse smart constructor. data ListBuildsResponse -- | A list of build IDs, with each build ID representing a single build. lbrsIds :: Lens' ListBuildsResponse (Maybe (NonEmpty Text)) -- | If there are more than 100 items in the list, only the first 100 items -- are returned, along with a unique string called a next token . -- To get the next batch of items in the list, call this operation again, -- adding the next token to the call. lbrsNextToken :: Lens' ListBuildsResponse (Maybe Text) -- | lbrsResponseStatus :: Lens' ListBuildsResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.ListBuilds.ListBuildsResponse instance Data.Data.Data Network.AWS.CodeBuild.ListBuilds.ListBuildsResponse instance GHC.Show.Show Network.AWS.CodeBuild.ListBuilds.ListBuildsResponse instance GHC.Read.Read Network.AWS.CodeBuild.ListBuilds.ListBuildsResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.ListBuilds.ListBuildsResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Data.Data.Data Network.AWS.CodeBuild.ListBuilds.ListBuilds instance GHC.Show.Show Network.AWS.CodeBuild.ListBuilds.ListBuilds instance GHC.Read.Read Network.AWS.CodeBuild.ListBuilds.ListBuilds instance GHC.Classes.Eq Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Network.AWS.Pager.AWSPager Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.ListBuilds.ListBuilds instance Control.DeepSeq.NFData Network.AWS.CodeBuild.ListBuilds.ListBuildsResponse -- | For an existing AWS CodeBuild build project that has its source code -- stored in a GitHub repository, stops AWS CodeBuild from automatically -- rebuilding the source code every time a code change is pushed to the -- repository. module Network.AWS.CodeBuild.DeleteWebhook -- | Creates a value of DeleteWebhook with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- deleteWebhook :: Text -> DeleteWebhook -- | See: deleteWebhook smart constructor. data DeleteWebhook -- | The name of the build project. dwProjectName :: Lens' DeleteWebhook Text -- | Creates a value of DeleteWebhookResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- deleteWebhookResponse :: Int -> DeleteWebhookResponse -- | See: deleteWebhookResponse smart constructor. data DeleteWebhookResponse -- | dwrsResponseStatus :: Lens' DeleteWebhookResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhookResponse instance Data.Data.Data Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhookResponse instance GHC.Show.Show Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhookResponse instance GHC.Read.Read Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhookResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhookResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Data.Data.Data Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance GHC.Show.Show Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance GHC.Read.Read Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance GHC.Classes.Eq Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Control.DeepSeq.NFData Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhook instance Control.DeepSeq.NFData Network.AWS.CodeBuild.DeleteWebhook.DeleteWebhookResponse -- | Deletes a build project. module Network.AWS.CodeBuild.DeleteProject -- | Creates a value of DeleteProject with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- deleteProject :: Text -> DeleteProject -- | See: deleteProject smart constructor. data DeleteProject -- | The name of the build project. dpName :: Lens' DeleteProject Text -- | Creates a value of DeleteProjectResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- deleteProjectResponse :: Int -> DeleteProjectResponse -- | See: deleteProjectResponse smart constructor. data DeleteProjectResponse -- | dprsResponseStatus :: Lens' DeleteProjectResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.DeleteProject.DeleteProjectResponse instance Data.Data.Data Network.AWS.CodeBuild.DeleteProject.DeleteProjectResponse instance GHC.Show.Show Network.AWS.CodeBuild.DeleteProject.DeleteProjectResponse instance GHC.Read.Read Network.AWS.CodeBuild.DeleteProject.DeleteProjectResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.DeleteProject.DeleteProjectResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Data.Data.Data Network.AWS.CodeBuild.DeleteProject.DeleteProject instance GHC.Show.Show Network.AWS.CodeBuild.DeleteProject.DeleteProject instance GHC.Read.Read Network.AWS.CodeBuild.DeleteProject.DeleteProject instance GHC.Classes.Eq Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.DeleteProject.DeleteProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.DeleteProject.DeleteProjectResponse -- | For an existing AWS CodeBuild build project that has its source code -- stored in a GitHub repository, enables AWS CodeBuild to begin -- automatically rebuilding the source code every time a code change is -- pushed to the repository. -- -- Important: If you enable webhooks for an AWS CodeBuild project, -- and the project is used as a build step in AWS CodePipeline, then two -- identical builds will be created for each commit. One build is -- triggered through webhooks, and one through AWS CodePipeline. Because -- billing is on a per-build basis, you will be billed for both builds. -- Therefore, if you are using AWS CodePipeline, we recommend that you -- disable webhooks in CodeBuild. In the AWS CodeBuild console, clear the -- Webhook box. For more information, see step 9 in Change a Build -- Project’s Settings . module Network.AWS.CodeBuild.CreateWebhook -- | Creates a value of CreateWebhook with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- createWebhook :: Text -> CreateWebhook -- | See: createWebhook smart constructor. data CreateWebhook -- | The name of the build project. cwProjectName :: Lens' CreateWebhook Text -- | Creates a value of CreateWebhookResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- createWebhookResponse :: Int -> CreateWebhookResponse -- | See: createWebhookResponse smart constructor. data CreateWebhookResponse -- | Information about a webhook in GitHub that connects repository events -- to a build project in AWS CodeBuild. cwrsWebhook :: Lens' CreateWebhookResponse (Maybe Webhook) -- | cwrsResponseStatus :: Lens' CreateWebhookResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.CreateWebhook.CreateWebhookResponse instance Data.Data.Data Network.AWS.CodeBuild.CreateWebhook.CreateWebhookResponse instance GHC.Show.Show Network.AWS.CodeBuild.CreateWebhook.CreateWebhookResponse instance GHC.Read.Read Network.AWS.CodeBuild.CreateWebhook.CreateWebhookResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.CreateWebhook.CreateWebhookResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Data.Data.Data Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance GHC.Show.Show Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance GHC.Read.Read Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance GHC.Classes.Eq Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Control.DeepSeq.NFData Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.CreateWebhook.CreateWebhook instance Control.DeepSeq.NFData Network.AWS.CodeBuild.CreateWebhook.CreateWebhookResponse -- | Creates a build project. module Network.AWS.CodeBuild.CreateProject -- | Creates a value of CreateProject with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- createProject :: Text -> ProjectSource -> ProjectArtifacts -> ProjectEnvironment -> CreateProject -- | See: createProject smart constructor. data CreateProject -- | The AWS Key Management Service (AWS KMS) customer master key (CMK) to -- be used for encrypting the build output artifacts. You can specify -- either the CMK's Amazon Resource Name (ARN) or, if available, the -- CMK's alias (using the format alias/alias-name ). cpEncryptionKey :: Lens' CreateProject (Maybe Text) -- | A description that makes the build project easy to identify. cpDescription :: Lens' CreateProject (Maybe Text) -- | The ARN of the AWS Identity and Access Management (IAM) role that -- enables AWS CodeBuild to interact with dependent AWS services on -- behalf of the AWS account. cpServiceRole :: Lens' CreateProject (Maybe Text) -- | A set of tags for this build project. These tags are available for use -- by AWS services that support AWS CodeBuild build project tags. cpTags :: Lens' CreateProject [Tag] -- | How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to -- wait until timing out any build that has not been marked as completed. -- The default is 60 minutes. cpTimeoutInMinutes :: Lens' CreateProject (Maybe Natural) -- | The name of the build project. cpName :: Lens' CreateProject Text -- | Information about the build input source code for the build project. cpSource :: Lens' CreateProject ProjectSource -- | Information about the build output artifacts for the build project. cpArtifacts :: Lens' CreateProject ProjectArtifacts -- | Information about the build environment for the build project. cpEnvironment :: Lens' CreateProject ProjectEnvironment -- | Creates a value of CreateProjectResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- createProjectResponse :: Int -> CreateProjectResponse -- | See: createProjectResponse smart constructor. data CreateProjectResponse -- | Information about the build project that was created. cprsProject :: Lens' CreateProjectResponse (Maybe Project) -- | cprsResponseStatus :: Lens' CreateProjectResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.CreateProject.CreateProjectResponse instance Data.Data.Data Network.AWS.CodeBuild.CreateProject.CreateProjectResponse instance GHC.Show.Show Network.AWS.CodeBuild.CreateProject.CreateProjectResponse instance GHC.Read.Read Network.AWS.CodeBuild.CreateProject.CreateProjectResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.CreateProject.CreateProjectResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.CreateProject.CreateProject instance Data.Data.Data Network.AWS.CodeBuild.CreateProject.CreateProject instance GHC.Show.Show Network.AWS.CodeBuild.CreateProject.CreateProject instance GHC.Read.Read Network.AWS.CodeBuild.CreateProject.CreateProject instance GHC.Classes.Eq Network.AWS.CodeBuild.CreateProject.CreateProject instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.CreateProject.CreateProject instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.CreateProject.CreateProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.CreateProject.CreateProject instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.CreateProject.CreateProject instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.CreateProject.CreateProject instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.CreateProject.CreateProject instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.CreateProject.CreateProject instance Control.DeepSeq.NFData Network.AWS.CodeBuild.CreateProject.CreateProjectResponse -- | Gets information about build projects. module Network.AWS.CodeBuild.BatchGetProjects -- | Creates a value of BatchGetProjects with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- batchGetProjects :: NonEmpty Text -> BatchGetProjects -- | See: batchGetProjects smart constructor. data BatchGetProjects -- | The names of the build projects. bgpNames :: Lens' BatchGetProjects (NonEmpty Text) -- | Creates a value of BatchGetProjectsResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- batchGetProjectsResponse :: Int -> BatchGetProjectsResponse -- | See: batchGetProjectsResponse smart constructor. data BatchGetProjectsResponse -- | The names of build projects for which information could not be found. bgprsProjectsNotFound :: Lens' BatchGetProjectsResponse (Maybe (NonEmpty Text)) -- | Information about the requested build projects. bgprsProjects :: Lens' BatchGetProjectsResponse [Project] -- | bgprsResponseStatus :: Lens' BatchGetProjectsResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjectsResponse instance Data.Data.Data Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjectsResponse instance GHC.Show.Show Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjectsResponse instance GHC.Read.Read Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjectsResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjectsResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Data.Data.Data Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance GHC.Show.Show Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance GHC.Read.Read Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance GHC.Classes.Eq Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Control.DeepSeq.NFData Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjects instance Control.DeepSeq.NFData Network.AWS.CodeBuild.BatchGetProjects.BatchGetProjectsResponse -- | Gets information about builds. module Network.AWS.CodeBuild.BatchGetBuilds -- | Creates a value of BatchGetBuilds with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- batchGetBuilds :: NonEmpty Text -> BatchGetBuilds -- | See: batchGetBuilds smart constructor. data BatchGetBuilds -- | The IDs of the builds. bgbIds :: Lens' BatchGetBuilds (NonEmpty Text) -- | Creates a value of BatchGetBuildsResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- batchGetBuildsResponse :: Int -> BatchGetBuildsResponse -- | See: batchGetBuildsResponse smart constructor. data BatchGetBuildsResponse -- | Information about the requested builds. bgbrsBuilds :: Lens' BatchGetBuildsResponse [Build] -- | The IDs of builds for which information could not be found. bgbrsBuildsNotFound :: Lens' BatchGetBuildsResponse (Maybe (NonEmpty Text)) -- | bgbrsResponseStatus :: Lens' BatchGetBuildsResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuildsResponse instance Data.Data.Data Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuildsResponse instance GHC.Show.Show Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuildsResponse instance GHC.Read.Read Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuildsResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuildsResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Data.Data.Data Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance GHC.Show.Show Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance GHC.Read.Read Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance GHC.Classes.Eq Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Control.DeepSeq.NFData Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuilds instance Control.DeepSeq.NFData Network.AWS.CodeBuild.BatchGetBuilds.BatchGetBuildsResponse -- | Deletes one or more builds. module Network.AWS.CodeBuild.BatchDeleteBuilds -- | Creates a value of BatchDeleteBuilds with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- batchDeleteBuilds :: NonEmpty Text -> BatchDeleteBuilds -- | See: batchDeleteBuilds smart constructor. data BatchDeleteBuilds -- | The IDs of the builds to delete. bdbIds :: Lens' BatchDeleteBuilds (NonEmpty Text) -- | Creates a value of BatchDeleteBuildsResponse with the minimum -- fields required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- batchDeleteBuildsResponse :: Int -> BatchDeleteBuildsResponse -- | See: batchDeleteBuildsResponse smart constructor. data BatchDeleteBuildsResponse -- | Information about any builds that could not be successfully deleted. bdbrsBuildsNotDeleted :: Lens' BatchDeleteBuildsResponse [BuildNotDeleted] -- | The IDs of the builds that were successfully deleted. bdbrsBuildsDeleted :: Lens' BatchDeleteBuildsResponse (Maybe (NonEmpty Text)) -- | bdbrsResponseStatus :: Lens' BatchDeleteBuildsResponse Int instance GHC.Generics.Generic Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuildsResponse instance Data.Data.Data Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuildsResponse instance GHC.Show.Show Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuildsResponse instance GHC.Read.Read Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuildsResponse instance GHC.Classes.Eq Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuildsResponse instance GHC.Generics.Generic Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Data.Data.Data Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance GHC.Show.Show Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance GHC.Read.Read Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance GHC.Classes.Eq Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Network.AWS.Types.AWSRequest Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Data.Hashable.Class.Hashable Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Control.DeepSeq.NFData Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Network.AWS.Data.Headers.ToHeaders Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Data.Aeson.Types.ToJSON.ToJSON Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Network.AWS.Data.Path.ToPath Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Network.AWS.Data.Query.ToQuery Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuilds instance Control.DeepSeq.NFData Network.AWS.CodeBuild.BatchDeleteBuilds.BatchDeleteBuildsResponse -- | AWS CodeBuild -- -- AWS CodeBuild is a fully managed build service in the cloud. AWS -- CodeBuild compiles your source code, runs unit tests, and produces -- artifacts that are ready to deploy. AWS CodeBuild eliminates the need -- to provision, manage, and scale your own build servers. It provides -- prepackaged build environments for the most popular programming -- languages and build tools, such as Apache Maven, Gradle, and more. You -- can also fully customize build environments in AWS CodeBuild to use -- your own build tools. AWS CodeBuild scales automatically to meet peak -- build requests, and you pay only for the build time you consume. For -- more information about AWS CodeBuild, see the AWS CodeBuild User -- Guide . -- -- AWS CodeBuild supports these operations: -- -- module Network.AWS.CodeBuild -- | API version 2016-10-06 of the Amazon CodeBuild SDK -- configuration. codeBuild :: Service -- | The specified AWS resource cannot be created, because an AWS resource -- with the same settings already exists. _ResourceAlreadyExistsException :: AsError a => Getting (First ServiceError) a ServiceError -- | There was a problem with the underlying OAuth provider. _OAuthProviderException :: AsError a => Getting (First ServiceError) a ServiceError -- | An AWS service limit was exceeded for the calling AWS account. _AccountLimitExceededException :: AsError a => Getting (First ServiceError) a ServiceError -- | The input value that was provided is not valid. _InvalidInputException :: AsError a => Getting (First ServiceError) a ServiceError -- | The specified AWS resource cannot be found. _ResourceNotFoundException :: AsError a => Getting (First ServiceError) a ServiceError data ArtifactNamespace ANBuildId :: ArtifactNamespace ANNone :: ArtifactNamespace data ArtifactPackaging None :: ArtifactPackaging Zip :: ArtifactPackaging data ArtifactsType Codepipeline :: ArtifactsType NoArtifacts :: ArtifactsType S3 :: ArtifactsType data BuildPhaseType Build :: BuildPhaseType Completed :: BuildPhaseType DownloadSource :: BuildPhaseType Finalizing :: BuildPhaseType Install :: BuildPhaseType PostBuild :: BuildPhaseType PreBuild :: BuildPhaseType Provisioning :: BuildPhaseType Submitted :: BuildPhaseType UploadArtifacts :: BuildPhaseType data ComputeType BuildGENERAL1Large :: ComputeType BuildGENERAL1Medium :: ComputeType BuildGENERAL1Small :: ComputeType data EnvironmentType LinuxContainer :: EnvironmentType data EnvironmentVariableType ParameterStore :: EnvironmentVariableType Plaintext :: EnvironmentVariableType data LanguageType Android :: LanguageType Base :: LanguageType Docker :: LanguageType Dotnet :: LanguageType Golang :: LanguageType Java :: LanguageType NodeJs :: LanguageType Python :: LanguageType Ruby :: LanguageType data PlatformType AmazonLinux :: PlatformType Debian :: PlatformType Ubuntu :: PlatformType data ProjectSortByType CreatedTime :: ProjectSortByType LastModifiedTime :: ProjectSortByType Name :: ProjectSortByType data SortOrderType Ascending :: SortOrderType Descending :: SortOrderType data SourceAuthType Oauth :: SourceAuthType data SourceType STBitbucket :: SourceType STCodecommit :: SourceType STCodepipeline :: SourceType STGithub :: SourceType STS3 :: SourceType data StatusType Failed :: StatusType Fault :: StatusType InProgress :: StatusType Stopped :: StatusType Succeeded :: StatusType TimedOut :: StatusType -- | Information about a build. -- -- See: build smart constructor. data Build -- | Creates a value of Build with the minimum fields required to -- make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- build :: Build -- | Information about all previous build phases that are completed and -- information about any current build phase that is not yet complete. bPhases :: Lens' Build [BuildPhase] -- | Whether the build has finished. True if completed; otherwise, false. bBuildComplete :: Lens' Build (Maybe Bool) -- | The Amazon Resource Name (ARN) of the build. bArn :: Lens' Build (Maybe Text) -- | When the build process started, expressed in Unix time format. bStartTime :: Lens' Build (Maybe UTCTime) -- | Information about the output artifacts for the build. bArtifacts :: Lens' Build (Maybe BuildArtifacts) -- | Information about the build environment for this build. bEnvironment :: Lens' Build (Maybe ProjectEnvironment) -- | The entity that started the build. Valid values include: * If AWS -- CodePipeline started the build, the pipeline's name (for example, -- codepipeline/my-demo-pipeline ). * If an AWS Identity and -- Access Management (IAM) user started the build, the user's name (for -- example MyUserName ). * If the Jenkins plugin for AWS -- CodeBuild started the build, the string -- CodeBuild-Jenkins-Plugin . bInitiator :: Lens' Build (Maybe Text) -- | The current build phase. bCurrentPhase :: Lens' Build (Maybe Text) -- | Any version identifier for the version of the source code to be built. bSourceVersion :: Lens' Build (Maybe Text) -- | Information about the build's logs in Amazon CloudWatch Logs. bLogs :: Lens' Build (Maybe LogsLocation) -- | When the build process ended, expressed in Unix time format. bEndTime :: Lens' Build (Maybe UTCTime) -- | The name of the build project. bProjectName :: Lens' Build (Maybe Text) -- | The current status of the build. Valid values include: * -- FAILED : The build failed. * FAULT : The build -- faulted. * IN_PROGRESS : The build is still in progress. * -- STOPPED : The build stopped. * SUCCEEDED : The build -- succeeded. * TIMED_OUT : The build timed out. bBuildStatus :: Lens' Build (Maybe StatusType) -- | Information about the source code to be built. bSource :: Lens' Build (Maybe ProjectSource) -- | The unique ID for the build. bId :: Lens' Build (Maybe Text) -- | How long, in minutes, for AWS CodeBuild to wait before timing out this -- build if it does not get marked as completed. bTimeoutInMinutes :: Lens' Build (Maybe Int) -- | Information about build output artifacts. -- -- See: buildArtifacts smart constructor. data BuildArtifacts -- | Creates a value of BuildArtifacts with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- buildArtifacts :: BuildArtifacts -- | Information about the location of the build artifacts. baLocation :: Lens' BuildArtifacts (Maybe Text) -- | The MD5 hash of the build artifact. You can use this hash along with a -- checksum tool to confirm both file integrity and authenticity. baMd5sum :: Lens' BuildArtifacts (Maybe Text) -- | The SHA-256 hash of the build artifact. You can use this hash along -- with a checksum tool to confirm both file integrity and authenticity. baSha256sum :: Lens' BuildArtifacts (Maybe Text) -- | Information about a build that could not be successfully deleted. -- -- See: buildNotDeleted smart constructor. data BuildNotDeleted -- | Creates a value of BuildNotDeleted with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- buildNotDeleted :: BuildNotDeleted -- | The ID of the build that could not be successfully deleted. bndId :: Lens' BuildNotDeleted (Maybe Text) -- | Additional information about the build that could not be successfully -- deleted. bndStatusCode :: Lens' BuildNotDeleted (Maybe Text) -- | Information about a stage for a build. -- -- See: buildPhase smart constructor. data BuildPhase -- | Creates a value of BuildPhase with the minimum fields required -- to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- buildPhase :: BuildPhase -- | Additional information about a build phase, especially to help -- troubleshoot a failed build. bpContexts :: Lens' BuildPhase [PhaseContext] -- | When the build phase started, expressed in Unix time format. bpStartTime :: Lens' BuildPhase (Maybe UTCTime) -- | The current status of the build phase. Valid values include: * -- FAILED : The build phase failed. * FAULT : The build -- phase faulted. * IN_PROGRESS : The build phase is still in -- progress. * STOPPED : The build phase stopped. * -- SUCCEEDED : The build phase succeeded. * TIMED_OUT : -- The build phase timed out. bpPhaseStatus :: Lens' BuildPhase (Maybe StatusType) -- | The name of the build phase. Valid values include: * BUILD : -- Core build activities typically occur in this build phase. * -- COMPLETED : The build has been completed. * -- DOWNLOAD_SOURCE : Source code is being downloaded in this -- build phase. * FINALIZING : The build process is completing -- in this build phase. * INSTALL : Installation activities -- typically occur in this build phase. * POST_BUILD : -- Post-build activities typically occur in this build phase. * -- PRE_BUILD : Pre-build activities typically occur in this -- build phase. * PROVISIONING : The build environment is being -- set up. * SUBMITTED : The build has been submitted. * -- UPLOAD_ARTIFACTS : Build output artifacts are being uploaded -- to the output location. bpPhaseType :: Lens' BuildPhase (Maybe BuildPhaseType) -- | When the build phase ended, expressed in Unix time format. bpEndTime :: Lens' BuildPhase (Maybe UTCTime) -- | How long, in seconds, between the starting and ending times of the -- build's phase. bpDurationInSeconds :: Lens' BuildPhase (Maybe Integer) -- | Information about a Docker image that is managed by AWS CodeBuild. -- -- See: environmentImage smart constructor. data EnvironmentImage -- | Creates a value of EnvironmentImage with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentImage :: EnvironmentImage -- | The name of the Docker image. eiName :: Lens' EnvironmentImage (Maybe Text) -- | The description of the Docker image. eiDescription :: Lens' EnvironmentImage (Maybe Text) -- | A set of Docker images that are related by programming language and -- are managed by AWS CodeBuild. -- -- See: environmentLanguage smart constructor. data EnvironmentLanguage -- | Creates a value of EnvironmentLanguage with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentLanguage :: EnvironmentLanguage -- | The list of Docker images that are related by the specified -- programming language. elImages :: Lens' EnvironmentLanguage [EnvironmentImage] -- | The programming language for the Docker images. elLanguage :: Lens' EnvironmentLanguage (Maybe LanguageType) -- | A set of Docker images that are related by platform and are managed by -- AWS CodeBuild. -- -- See: environmentPlatform smart constructor. data EnvironmentPlatform -- | Creates a value of EnvironmentPlatform with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentPlatform :: EnvironmentPlatform -- | The platform's name. epPlatform :: Lens' EnvironmentPlatform (Maybe PlatformType) -- | The list of programming languages that are available for the specified -- platform. epLanguages :: Lens' EnvironmentPlatform [EnvironmentLanguage] -- | Information about an environment variable for a build project or a -- build. -- -- See: environmentVariable smart constructor. data EnvironmentVariable -- | Creates a value of EnvironmentVariable with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- environmentVariable :: Text -> Text -> EnvironmentVariable -- | The type of environment variable. Valid values include: * -- PARAMETER_STORE : An environment variable stored in Amazon -- EC2 Systems Manager Parameter Store. * PLAINTEXT : An -- environment variable in plaintext format. evType :: Lens' EnvironmentVariable (Maybe EnvironmentVariableType) -- | The name or key of the environment variable. evName :: Lens' EnvironmentVariable Text -- | The value of the environment variable. Important: We strongly -- discourage using environment variables to store sensitive values, -- especially AWS secret key IDs and secret access keys. Environment -- variables can be displayed in plain text using tools such as the AWS -- CodeBuild console and the AWS Command Line Interface (AWS CLI). evValue :: Lens' EnvironmentVariable Text -- | Information about build logs in Amazon CloudWatch Logs. -- -- See: logsLocation smart constructor. data LogsLocation -- | Creates a value of LogsLocation with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- logsLocation :: LogsLocation -- | The URL to an individual build log in Amazon CloudWatch Logs. llDeepLink :: Lens' LogsLocation (Maybe Text) -- | The name of the Amazon CloudWatch Logs group for the build logs. llGroupName :: Lens' LogsLocation (Maybe Text) -- | The name of the Amazon CloudWatch Logs stream for the build logs. llStreamName :: Lens' LogsLocation (Maybe Text) -- | Additional information about a build phase that has an error. You can -- use this information to help troubleshoot a failed build. -- -- See: phaseContext smart constructor. data PhaseContext -- | Creates a value of PhaseContext with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- phaseContext :: PhaseContext -- | An explanation of the build phase's context. This explanation might -- include a command ID and an exit code. pcMessage :: Lens' PhaseContext (Maybe Text) -- | The status code for the context of the build phase. pcStatusCode :: Lens' PhaseContext (Maybe Text) -- | Information about a build project. -- -- See: project smart constructor. data Project -- | Creates a value of Project with the minimum fields required to -- make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- project :: Project -- | The Amazon Resource Name (ARN) of the build project. pArn :: Lens' Project (Maybe Text) -- | Information about the build output artifacts for the build project. pArtifacts :: Lens' Project (Maybe ProjectArtifacts) -- | Information about the build environment for this build project. pEnvironment :: Lens' Project (Maybe ProjectEnvironment) -- | When the build project was created, expressed in Unix time format. pCreated :: Lens' Project (Maybe UTCTime) -- | The name of the build project. pName :: Lens' Project (Maybe Text) -- | Information about the build input source code for this build project. pSource :: Lens' Project (Maybe ProjectSource) -- | The AWS Key Management Service (AWS KMS) customer master key (CMK) to -- be used for encrypting the build output artifacts. This is expressed -- either as the CMK's Amazon Resource Name (ARN) or, if specified, the -- CMK's alias (using the format alias/alias-name ). pEncryptionKey :: Lens' Project (Maybe Text) -- | When the build project's settings were last modified, expressed in -- Unix time format. pLastModified :: Lens' Project (Maybe UTCTime) -- | Information about a webhook in GitHub that connects repository events -- to a build project in AWS CodeBuild. pWebhook :: Lens' Project (Maybe Webhook) -- | A description that makes the build project easy to identify. pDescription :: Lens' Project (Maybe Text) -- | The ARN of the AWS Identity and Access Management (IAM) role that -- enables AWS CodeBuild to interact with dependent AWS services on -- behalf of the AWS account. pServiceRole :: Lens' Project (Maybe Text) -- | The tags for this build project. These tags are available for use by -- AWS services that support AWS CodeBuild build project tags. pTags :: Lens' Project [Tag] -- | How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to -- wait before timing out any related build that did not get marked as -- completed. The default is 60 minutes. pTimeoutInMinutes :: Lens' Project (Maybe Natural) -- | Information about the build output artifacts for the build project. -- -- See: projectArtifacts smart constructor. data ProjectArtifacts -- | Creates a value of ProjectArtifacts with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- projectArtifacts :: ArtifactsType -> ProjectArtifacts -- | The type of build output artifact to create, as follows: * If -- type is set to CODEPIPELINE , then AWS CodePipeline -- will ignore this value if specified. This is because AWS CodePipeline -- manages its build output artifacts instead of AWS CodeBuild. * If -- type is set to NO_ARTIFACTS , then this value will -- be ignored if specified, because no build output will be produced. * -- If type is set to S3 , valid values include: * -- NONE : AWS CodeBuild will create in the output bucket a -- folder containing the build output. This is the default if -- packaging is not specified. * ZIP : AWS CodeBuild -- will create in the output bucket a ZIP file containing the build -- output. paPackaging :: Lens' ProjectArtifacts (Maybe ArtifactPackaging) -- | Along with namespaceType and name , the pattern that -- AWS CodeBuild will use to name and store the output artifact, as -- follows: * If type is set to CODEPIPELINE , then AWS -- CodePipeline will ignore this value if specified. This is because AWS -- CodePipeline manages its build output names instead of AWS CodeBuild. -- * If type is set to NO_ARTIFACTS , then this value -- will be ignored if specified, because no build output will be -- produced. * If type is set to S3 , this is the path -- to the output artifact. If path is not specified, then -- path will not be used. For example, if path is set -- to MyArtifacts , namespaceType is set to -- NONE , and name is set to MyArtifact.zip , -- then the output artifact would be stored in the output bucket at -- MyArtifacts/MyArtifact.zip . paPath :: Lens' ProjectArtifacts (Maybe Text) -- | Information about the build output artifact location, as follows: * If -- type is set to CODEPIPELINE , then AWS CodePipeline -- will ignore this value if specified. This is because AWS CodePipeline -- manages its build output locations instead of AWS CodeBuild. * If -- type is set to NO_ARTIFACTS , then this value will -- be ignored if specified, because no build output will be produced. * -- If type is set to S3 , this is the name of the -- output bucket. paLocation :: Lens' ProjectArtifacts (Maybe Text) -- | Along with path and namespaceType , the pattern that -- AWS CodeBuild will use to name and store the output artifact, as -- follows: * If type is set to CODEPIPELINE , then AWS -- CodePipeline will ignore this value if specified. This is because AWS -- CodePipeline manages its build output names instead of AWS CodeBuild. -- * If type is set to NO_ARTIFACTS , then this value -- will be ignored if specified, because no build output will be -- produced. * If type is set to S3 , this is the name -- of the output artifact object. For example, if path is set to -- MyArtifacts , namespaceType is set to -- BUILD_ID , and name is set to -- MyArtifact.zip , then the output artifact would be stored in -- MyArtifacts/build-ID /MyArtifact.zip . paName :: Lens' ProjectArtifacts (Maybe Text) -- | Along with path and name , the pattern that AWS -- CodeBuild will use to determine the name and location to store the -- output artifact, as follows: * If type is set to -- CODEPIPELINE , then AWS CodePipeline will ignore this value -- if specified. This is because AWS CodePipeline manages its build -- output names instead of AWS CodeBuild. * If type is set to -- NO_ARTIFACTS , then this value will be ignored if specified, -- because no build output will be produced. * If type is set to -- S3 , then valid values include: * BUILD_ID : Include -- the build ID in the location of the build output artifact. * -- NONE : Do not include the build ID. This is the default if -- namespaceType is not specified. For example, if path -- is set to MyArtifacts , namespaceType is set to -- BUILD_ID , and name is set to -- MyArtifact.zip , then the output artifact would be stored in -- MyArtifacts/build-ID /MyArtifact.zip . paNamespaceType :: Lens' ProjectArtifacts (Maybe ArtifactNamespace) -- | The type of build output artifact. Valid values include: * -- CODEPIPELINE : The build project will have build output -- generated through AWS CodePipeline. * NO_ARTIFACTS : The -- build project will not produce any build output. * S3 : The -- build project will store build output in Amazon Simple Storage Service -- (Amazon S3). paType :: Lens' ProjectArtifacts ArtifactsType -- | Information about the build environment of the build project. -- -- See: projectEnvironment smart constructor. data ProjectEnvironment -- | Creates a value of ProjectEnvironment with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- projectEnvironment :: EnvironmentType -> Text -> ComputeType -> ProjectEnvironment -- | If set to true, enables running the Docker daemon inside a Docker -- container; otherwise, false or not specified (the default). This value -- must be set to true only if this build project will be used to build -- Docker images, and the specified build environment image is not one -- provided by AWS CodeBuild with Docker support. Otherwise, all -- associated builds that attempt to interact with the Docker daemon will -- fail. Note that you must also start the Docker daemon so that your -- builds can interact with it as needed. One way to do this is to -- initialize the Docker daemon in the install phase of your build spec -- by running the following build commands. (Do not run the following -- build commands if the specified build environment image is provided by -- AWS CodeBuild with Docker support.) - nohup -- usrlocalbindockerd -- --host=unix://varrundocker.sock --host=tcp:/0.0.0.0:2375 -- --storage-driver=overlay& - timeout -t 15 sh -c "until docker -- info; do echo .; sleep 1; done" pePrivilegedMode :: Lens' ProjectEnvironment (Maybe Bool) -- | A set of environment variables to make available to builds for this -- build project. peEnvironmentVariables :: Lens' ProjectEnvironment [EnvironmentVariable] -- | The type of build environment to use for related builds. peType :: Lens' ProjectEnvironment EnvironmentType -- | The ID of the Docker image to use for this build project. peImage :: Lens' ProjectEnvironment Text -- | Information about the compute resources the build project will use. -- Available values include: * BUILD_GENERAL1_SMALL : Use up to -- 3 GB memory and 2 vCPUs for builds. * BUILD_GENERAL1_MEDIUM : -- Use up to 7 GB memory and 4 vCPUs for builds. * -- BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for -- builds. peComputeType :: Lens' ProjectEnvironment ComputeType -- | Information about the build input source code for the build project. -- -- See: projectSource smart constructor. data ProjectSource -- | Creates a value of ProjectSource with the minimum fields -- required to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- projectSource :: SourceType -> ProjectSource -- | Information about the location of the source code to be built. Valid -- values include: * For source code settings that are specified in the -- source action of a pipeline in AWS CodePipeline, location -- should not be specified. If it is specified, AWS CodePipeline will -- ignore it. This is because AWS CodePipeline uses the settings in a -- pipeline's source action instead of this value. * For source code in -- an AWS CodeCommit repository, the HTTPS clone URL to the repository -- that contains the source code and the build spec (for example, -- https://git-codecommit./region-ID/ -- .amazonaws.comv1repos/repo-name ). * For source -- code in an Amazon Simple Storage Service (Amazon S3) input bucket, the -- path to the ZIP file that contains the source code (for example, -- bucket-name /path /to /object-name -- .zip ) * For source code in a GitHub repository, the HTTPS clone -- URL to the repository that contains the source and the build spec. -- Also, you must connect your AWS account to your GitHub account. To do -- this, use the AWS CodeBuild console to begin creating a build project. -- When you use the console to connect (or reconnect) with GitHub, on the -- GitHub Authorize application page that displays, for -- Organization access , choose Request access next to each -- repository you want to allow AWS CodeBuild to have access to. Then -- choose Authorize application . (After you have connected to -- your GitHub account, you do not need to finish creating the build -- project, and you may then leave the AWS CodeBuild console.) To -- instruct AWS CodeBuild to then use this connection, in the -- source object, set the auth object's type -- value to OAUTH . * For source code in a Bitbucket repository, -- the HTTPS clone URL to the repository that contains the source and the -- build spec. Also, you must connect your AWS account to your Bitbucket -- account. To do this, use the AWS CodeBuild console to begin creating a -- build project. When you use the console to connect (or reconnect) with -- Bitbucket, on the Bitbucket Confirm access to your account page -- that displays, choose Grant access . (After you have connected -- to your Bitbucket account, you do not need to finish creating the -- build project, and you may then leave the AWS CodeBuild console.) To -- instruct AWS CodeBuild to then use this connection, in the -- source object, set the auth object's type -- value to OAUTH . psLocation :: Lens' ProjectSource (Maybe Text) -- | Information about the authorization settings for AWS CodeBuild to -- access the source code to be built. This information is for the AWS -- CodeBuild console's use only. Your code should not get or set this -- information directly (unless the build project's source type -- value is BITBUCKET or GITHUB ). psAuth :: Lens' ProjectSource (Maybe SourceAuth) -- | The build spec declaration to use for the builds in this build -- project. If this value is not specified, a build spec must be included -- along with the source code to be built. psBuildspec :: Lens' ProjectSource (Maybe Text) -- | The type of repository that contains the source code to be built. -- Valid values include: * BITBUCKET : The source code is in a -- Bitbucket repository. * CODECOMMIT : The source code is in an -- AWS CodeCommit repository. * CODEPIPELINE : The source code -- settings are specified in the source action of a pipeline in AWS -- CodePipeline. * GITHUB : The source code is in a GitHub -- repository. * S3 : The source code is in an Amazon Simple -- Storage Service (Amazon S3) input bucket. psType :: Lens' ProjectSource SourceType -- | Information about the authorization settings for AWS CodeBuild to -- access the source code to be built. -- -- This information is for the AWS CodeBuild console's use only. Your -- code should not get or set this information directly (unless the build -- project's source type value is BITBUCKET or -- GITHUB ). -- -- See: sourceAuth smart constructor. data SourceAuth -- | Creates a value of SourceAuth with the minimum fields required -- to make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- sourceAuth :: SourceAuthType -> SourceAuth -- | The resource value that applies to the specified authorization type. saResource :: Lens' SourceAuth (Maybe Text) -- | The authorization type to use. The only valid value is OAUTH -- , which represents the OAuth authorization type. saType :: Lens' SourceAuth SourceAuthType -- | A tag, consisting of a key and a value. -- -- This tag is available for use by AWS services that support tags in AWS -- CodeBuild. -- -- See: tag smart constructor. data Tag -- | Creates a value of Tag with the minimum fields required to make -- a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- tag :: Tag -- | The tag's value. tagValue :: Lens' Tag (Maybe Text) -- | The tag's key. tagKey :: Lens' Tag (Maybe Text) -- | Information about a webhook in GitHub that connects repository events -- to a build project in AWS CodeBuild. -- -- See: webhook smart constructor. data Webhook -- | Creates a value of Webhook with the minimum fields required to -- make a request. -- -- Use one of the following lenses to modify other fields as desired: -- -- webhook :: Webhook -- | The URL to the webhook. wUrl :: Lens' Webhook (Maybe Text)