E      !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~                          !"#$%&'()*+,-./0123456789:;<=>?@ABCDNone (024=BKTVersion  2012-09-25* of the Amazon Elastic Transcoder service. constructor.7The fields accessible through corresponding lenses are: :: E F :: [] :: E FfThe Amazon S3 bucket in which you want Elastic Transcoder to save the transcoded files. Specify this value when all of the following are true: You want to save transcoded files, thumbnails (if any), and playlists (if any) together in one bucket. You do not want to specify the users or groups who have access to the transcoded files, thumbnails, and playlists. You do not want to specify the permissions that Elastic Transcoder grants to the files. You want to associate the transcoded files and thumbnails with the Amazon S3 Standard storage class. If you want to save transcoded files and playlists in one bucket and thumbnails in another bucket, specify which users can access the transcoded files or the permissions the users have, or change the Amazon S3 storage class, omit OutputBucket and specify values for ContentConfig and ThumbnailConfig instead.Optional. The Permissions object specifies which users and/or predefined Amazon S3 groups you want to have access to transcoded files and playlists, and the type of access you want them to have. You can grant permissions to a maximum of 30 users and/or predefined Amazon S3 groups. If you include Permissions, Elastic Transcoder grants only the permissions that you specify. It does not grant full permissions to the owner of the role specified by Role. If you want that user to have full control, you must explicitly grant full control to the user. If you omit Permissions, Elastic Transcoder grants full control over the transcoded files and playlists to the owner of the role specified by Role, and grants no other permissions to any other user or group.The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the video files and playlists that it stores in your Amazon S3 bucket. constructor.7The fields accessible through corresponding lenses are: :: E F  :: E F! :: [F]SThe format of the output playlist. Valid formats include HLSv3, HLSv4, and Smooth. BThe name that you want Elastic Transcoder to assign to the master playlist, for example, nyc-vacation.m3u8. If the name includes a / character, the section of the name before the last / must be identical for all Name objects. If you create more than one master playlist, the values of all Name objects must be unique. Note: Elastic Transcoder automatically appends the relevant file extension to the file name (.m3u8 for HLSv3 and HLSv4 playlists, and .ism and .ismc for Smooth playlists). If you include a file extension in Name, the file name will have two extensions.!For each output in this job that you want to include in a master playlist, the value of the Outputs:Key object. If your output is not HLS or does not have a segment duration set, the name of the output file is a concatenation of OutputKeyPrefix and Outputs:Key: OutputKeyPrefixOutputs:Key If your output is HLSv3 and has a segment duration set, or is not included in a playlist, Elastic Transcoder creates an output playlist file with a file extension of .m3u8, and a series of .ts files that include a five-digit sequential counter beginning with 00000: OutputKeyPrefixOutputs:Key.m3u8 OutputKeyPrefixOutputs:Key00000.ts If your output is HLSv4, has a segment duration set, and is included in an HLSv4 playlist, Elastic Transcoder creates an output playlist file with a file extension of _v4.m3u8. If the output is video, Elastic Transcoder also creates an output file with an extension of _iframe.m3u8: OutputKeyPrefixOutputs:Key_v4.m3u8 OutputKeyPrefixOutputs:Key_iframe.m3u8 OutputKeyPrefixOutputs:Key.ts Elastic Transcoder automatically appends the relevant file extension to the file name. If you include a file extension in Output Key, the file name will have two extensions. If you include more than one output in a playlist, any segment duration settings, clip settings, or caption settings must be the same for all outputs in the playlist. For Smooth playlists, the Audio:Profile, Video:Profile, and Video:FrameRate to Video:KeyframesMaxDist ratio must be the same for all outputs." constructor.7The fields accessible through corresponding lenses are:# :: []$ :: []% :: E F#wThe array of file formats for the output captions. If you leave this value blank, Elastic Transcoder returns an error.$Source files for the input sidecar captions used during the transcoding process. To omit all sidecar captions, leave CaptionSources blank.%A policy that determines how Elastic Transcoder handles the existence of multiple captions. MergeOverride: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the sidecar captions and ignores the embedded captions for that language. MergeRetain: Elastic Transcoder transcodes both embedded and sidecar captions into outputs. If captions for a language are embedded in the input file and also appear in a sidecar file, Elastic Transcoder uses the embedded captions and ignores the sidecar captions for that language. If CaptionSources is empty, Elastic Transcoder omits all sidecar captions from the output files. Override: Elastic Transcoder transcodes only the sidecar captions that you specify in CaptionSources. MergePolicy cannot be null.& constructor.7The fields accessible through corresponding lenses are:' :: E F'You can only choose an audio profile when you specify AAC for the value of Audio:Codec. Specify the AAC profile for the output file. Elastic Transcoder supports the following profiles: auto: If you specify auto, Elastic Transcoder will select the profile based on the bit rate selected for the output file. AAC-LC: The most common AAC profile. Use for bitrates larger than 64 kbps. HE-AAC: Not supported on some older players and devices. Use for bitrates between 40 and 80 kbps. HE-AACv2: Not supported on some players and devices. Use for bitrates less than 48 kbps. All outputs in a Smooth playlist must have the same value for Profile.( constructor.7The fields accessible through corresponding lenses are:) :: E  * :: E + :: [], :: E G- :: E H. :: E F/ :: E F0 :: E F1 :: E F2 :: E F3 :: E F4 :: E F5 :: E F6 :: [ ]7 :: E H)<The album art to be associated with the output file, if any.*You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.+{You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.,(Duration of the output file, in seconds.-%Height of the output file, in pixels..A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1./The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.0The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets.1The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values: auto, 0, 90, 180, 270 The value auto generally works only if the file that you're transcoding contains rotation metadata.2(Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration, the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist.3The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status. If you specified more than one output: Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete. If Outputs:Status for one or more outputs is Error, the terminal status for Job:Status is also Error. The value of Status is one of the following: Submitted, Progressing, Complete, Canceled, or Error.4)Information that further explains Status.5Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files. If you don't want Elastic Transcoder to create thumbnails, specify "". If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence: {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file. If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job. Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}. {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object. When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.6Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third.71Specifies the width of the output file in pixels.8 constructor.7The fields accessible through corresponding lenses are: 9 :: E F: :: E F; :: E < :: E = :: E F> :: []? :: E F@ :: []A :: E F9+The Amazon Resource Name (ARN) for the job.:The identifier that Elastic Transcoder assigned to the job. You use this value to get settings for the job or to delete the job.;mA section of the request or response body that provides information about the file that is being transcoded.<If you specified one output for a job, information about that output. If you specified multiple outputs for a job, the Output object lists information about the first output. This duplicates the information that is listed for the first output in the Outputs object. Outputs recommended instead. A section of the request or response body that provides information about the transcoded (target) file.=The value, if any, that you want Elastic Transcoder to prepend to the names of all files that this job creates, including output files, thumbnails, and playlists. We recommend that you add a / or some other delimiter to the end of the OutputKeyPrefix.>Information about the output files. We recommend that you use the Outputs syntax for all jobs, even when you want Elastic Transcoder to transcode a file into only one format. Do not use both the Outputs and Output syntaxes in the same request. You can create a maximum of 30 outputs per job. If you specify more than one output for a job, Elastic Transcoder creates the files for each output in the order in which you specify them in the job.?The Id of the pipeline that you want Elastic Transcoder to use for transcoding. The pipeline determines several settings, including the Amazon S3 bucket from which Elastic Transcoder gets the files to transcode and the bucket into which Elastic Transcoder puts the transcoded files.@@Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), Playlists contains information about the master playlists that you want Elastic Transcoder to create. The maximum number of master playlists in a job is 30.AMThe status of the job: Submitted, Progressing, Complete, Canceled, or Error.B constructor.7The fields accessible through corresponding lenses are:C :: E FD :: E FE :: E FF :: E FCeThe name of the sidecar caption file that you want Elastic Transcoder to include in the output file.DThe label of the caption shown in the player when choosing a language. We recommend that you put the caption language name here, in the language of the captions.EA string that specifies the language of the caption. Specify this as one of: 2-character ISO 639-1 code 3-character ISO 639-2 code For more information on ISO language codes and language names, see the List of ISO 639-1 codes.FFor clip generation or captions that do not start at the same time as the associated video file, the TimeOffset tells Elastic Transcoder how much of the video to encode before including captions. Specify the TimeOffset in the form [+-]SS.sss or [+-]HH:mm:SS.ss.G constructor.7The fields accessible through corresponding lenses are:H :: E FI :: E FJ :: E FK :: E FL :: E FM :: E FHAThe format of album art, if any. Valid formats are .jpg and .png.IThe name of the file to be used as album art. To determine which Amazon S3 bucket contains the specified file, Elastic Transcoder checks the pipeline specified by PipelineId; the InputBucket object in that pipeline identifies the bucket. If the file name includes a prefix, for example, cooking/pie.jpg, include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.JThe maximum height of the output album art in pixels. If you specify auto, Elastic Transcoder uses 600 as the default value. If you specify a numeric value, enter an even integer between 32 and 3072, inclusive.KThe maximum width of the output album art in pixels. If you specify auto, Elastic Transcoder uses 600 as the default value. If you specify a numeric value, enter an even integer between 32 and 4096, inclusive.LWhen you set PaddingPolicy to Pad, Elastic Transcoder may add white bars to the top and bottom and/or left and right sides of the output album art to make the total size of the output art match the values that you specified for MaxWidth and MaxHeight.MSpecify one of the following values to control scaling of the output album art: Fit: Elastic Transcoder scales the output art so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value. Fill: Elastic Transcoder scales the output art so it matches the value that you specified in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder centers the output art and then crops it in the dimension (if any) that exceeds the maximum value. Stretch: Elastic Transcoder stretches the output art to match the values that you specified for MaxWidth and MaxHeight. If the relative proportions of the input art and the output art are different, the output art will be distorted. Keep: Elastic Transcoder does not scale the output art. If either dimension of the input art exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder crops the output art. ShrinkToFit: Elastic Transcoder scales the output art down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the art up. ShrinkToFill Elastic Transcoder scales the output art down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale the art up.N constructor.7The fields accessible through corresponding lenses are:O :: E FP :: E FOThe duration of the clip. The format can be either HH:mm:ss.SSS (maximum value: 23:59:59.999; SSS is thousandths of a second) or sssss.SSS (maximum value: 86399.999). If you don't specify a value, Elastic Transcoder creates an output file from StartTime to the end of the file. If you specify a value longer than the duration of the input file, Elastic Transcoder transcodes the file and returns a warning message.P(The place in the input file where you want a clip to start. The format can be either HH:mm:ss.SSS (maximum value: 23:59:59.999; SSS is thousandths of a second) or sssss.SSS (maximum value: 86399.999). If you don't specify a value, Elastic Transcoder starts at the beginning of the input file.Q constructor.7The fields accessible through corresponding lenses are: R :: E  S :: E T :: []U :: E FV :: E FW :: E FX :: E FY :: E FZ :: [ ]RInformation about the album art that you want Elastic Transcoder to add to the file during transcoding. You can specify up to twenty album artworks for each output. Settings for each artwork must be defined in the job for the current output.SYou can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.T{You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.UThe name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID. If a file with the specified name already exists in the output bucket, the job fails.VThe Id of the preset to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding.WThe number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values: auto, 0, 90, 180, 270. The value auto generally works only if the file that you're transcoding contains rotation metadata.X(Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration, the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist.YWhether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files. If you don't want Elastic Transcoder to create thumbnails, specify "". If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence: {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file. If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job. Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}. {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object. When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.ZInformation about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset for the current output.[ constructor.7The fields accessible through corresponding lenses are:\ :: E F] :: E F^ :: E F_ :: E ` :: E F\yThe bit rate of the audio stream in the output file, in kilobits/second. Enter an integer between 64 and 320, inclusive.]The number of audio channels in the output file. Valid values include: auto, 0, 1, 2 If you specify auto, Elastic Transcoder automatically detects the number of channels in the input file.^PThe audio codec for the output file. Valid values include aac, mp3, and vorbis._If you specified AAC for Audio:Codec, this is the AAC compression profile to use. Valid values include: auto, AAC-LC, HE-AAC, HE-AACv2 If you specify auto, Elastic Transcoder chooses a profile based on the bit rate of the output file.`The sample rate of the audio stream in the output file, in Hertz. Valid values include: auto, 22050, 32000, 44100, 48000, 96000 If you specify auto, Elastic Transcoder automatically detects the sample rate.a  constructor.7The fields accessible through corresponding lenses are:b :: E Fc :: E Fd :: E Fe :: E Ff :: E Fg :: E Fh :: E Fi :: E FbTo better control resolution and aspect ratio of thumbnails, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, and PaddingPolicy instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together. The aspect ratio of thumbnails. Valid values include: auto, 1:1, 4:3, 3:2, 16:9 If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the video in the output file.cThe format of thumbnails, if any. Valid values are jpg and png. You specify whether you want Elastic Transcoder to create thumbnails when you create a job.dCThe number of seconds between thumbnails. Specify an integer value.eThe maximum height of thumbnails in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 32 and 3072.fThe maximum width of thumbnails in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 32 and 4096.gWhen you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of thumbnails to make the total size of the thumbnails match the values that you specified for thumbnail MaxWidth and MaxHeight settings.hTo better control resolution and aspect ratio of thumbnails, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, and PaddingPolicy instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together. The width and height of thumbnail files in pixels. Specify a value in the format width x height where both values are even integers. The values cannot exceed the width and height that you specified in the Video:Resolution object.iSpecify one of the following values to control scaling of thumbnails: Fit: Elastic Transcoder scales thumbnails so they match the value that you specified in thumbnail MaxWidth or MaxHeight settings without exceeding the other value. Fill: Elastic Transcoder scales thumbnails so they match the value that you specified in thumbnail MaxWidth or MaxHeight settings and matches or exceeds the other value. Elastic Transcoder centers the image in thumbnails and then crops in the dimension (if any) that exceeds the maximum value. Stretch: Elastic Transcoder stretches thumbnails to match the values that you specified for thumbnail MaxWidth and MaxHeight settings. If the relative proportions of the input video and thumbnails are different, the thumbnails will be distorted. Keep: Elastic Transcoder does not scale thumbnails. If either dimension of the input video exceeds the values that you specified for thumbnail MaxWidth and MaxHeight settings, Elastic Transcoder crops the thumbnails. ShrinkToFit: Elastic Transcoder scales thumbnails down so that their dimensions match the values that you specified for at least one of thumbnail MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale thumbnails up. ShrinkToFill: Elastic Transcoder scales thumbnails down so that their dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale thumbnails up.j  constructor.7The fields accessible through corresponding lenses are:k :: []l :: E FkThe file to be used as album art. There can be multiple artworks associated with an audio file, to a maximum of 20. Valid formats are .jpg and .png.l2A policy that determines how Elastic Transcoder will handle the existence of multiple album artwork files. Replace: The specified album art will replace any existing album art. Prepend: The specified album art will be placed in front of any existing album art. Append: The specified album art will be placed after any existing album art. Fallback: If the original input file contains artwork, Elastic Transcoder will use that artwork for the output. If the original input does not contain artwork, Elastic Transcoder will use the specified album art file.m  constructor.7The fields accessible through corresponding lenses are:n :: E Fo :: E FnThe name of the .png or .jpg file that you want to use for the watermark. To determine which Amazon S3 bucket contains the specified file, Elastic Transcoder checks the pipeline specified by Pipeline; the Input Bucket object in that pipeline identifies the bucket. If the file name includes a prefix, for example, logos/128x64.png, include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.oThe ID of the watermark settings that Elastic Transcoder uses to add watermarks to the video during transcoding. The settings are in the preset specified by Preset for the current output. In that preset, the value of Watermarks Id tells Elastic Transcoder which settings to use.p  constructor.7The fields accessible through corresponding lenses are: q :: E Fr :: E s :: E Ft :: E Fu :: E Fv :: E w :: E Fx :: E Fy :: E Fz :: E q0The Amazon Resource Name (ARN) for the pipeline.rInformation about the Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. Either you specify both ContentConfig and ThumbnailConfig, or you specify OutputBucket. Bucket: The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. Permissions: A list of the users and/or predefined Amazon S3 groups you want to have access to transcoded files and playlists, and the type of access that you want them to have. GranteeType: The type of value that appears in the Grantee object: Canonical: Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. Email: The registered email address of an AWS account. Group: One of the following predefined Amazon S3 groups: AllUsers, AuthenticatedUsers, or LogDelivery. Grantee: The AWS user or group that you want to have access to transcoded files and playlists. Access: The permission that you want to give to the AWS user that is listed in Grantee. Valid values include: READ: The grantee can read the objects and metadata for objects that Elastic Transcoder adds to the Amazon S3 bucket. READ_ACP: The grantee can read the object ACL for objects that Elastic Transcoder adds to the Amazon S3 bucket. WRITE_ACP: The grantee can write the ACL for the objects that Elastic Transcoder adds to the Amazon S3 bucket. FULL_CONTROL: The grantee has READ, READ_ACP, and WRITE_ACP permissions for the objects that Elastic Transcoder adds to the Amazon S3 bucket. StorageClass: The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the video files and playlists that it stores in your Amazon S3 bucket.sThe identifier for the pipeline. You use this value to identify the pipeline in which you want to perform a variety of operations, such as creating a job or a preset.tThe Amazon S3 bucket from which Elastic Transcoder gets media files for transcoding and the graphics files, if any, that you want to use for watermarks.uThe name of the pipeline. We recommend that the name be unique within the AWS account, but uniqueness is not enforced. Constraints: Maximum 40 characters.vThe Amazon Simple Notification Service (Amazon SNS) topic that you want to notify to report job status. To receive notifications, you must also subscribe to the new topic in the Amazon SNS console. Progressing (optional): The Amazon Simple Notification Service (Amazon SNS) topic that you want to notify when Elastic Transcoder has started to process the job. Completed (optional): The Amazon SNS topic that you want to notify when Elastic Transcoder has finished processing the job. Warning (optional): The Amazon SNS topic that you want to notify when Elastic Transcoder encounters a warning condition. Error (optional): The Amazon SNS topic that you want to notify when Elastic Transcoder encounters an error condition.wThe Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files, thumbnails, and playlists. Either you specify this value, or you specify both ContentConfig and ThumbnailConfig.xrThe IAM Amazon Resource Name (ARN) for the role that Elastic Transcoder uses to transcode jobs for this pipeline.yThe current status of the pipeline: Active: The pipeline is processing jobs. Paused: The pipeline is not currently processing jobs.zInformation about the Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files. Either you specify both ContentConfig and ThumbnailConfig, or you specify OutputBucket. Bucket: The Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files. Permissions: A list of the users and/or predefined Amazon S3 groups you want to have access to thumbnail files, and the type of access that you want them to have. GranteeType: The type of value that appears in the Grantee object: Canonical: Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. A canonical user ID is not the same as an AWS account number. Email: The registered email address of an AWS account. Group: One of the following predefined Amazon S3 groups: AllUsers, AuthenticatedUsers, or LogDelivery. Grantee: The AWS user or group that you want to have access to thumbnail files. Access: The permission that you want to give to the AWS user that is listed in Grantee. Valid values include: READ: The grantee can read the thumbnails and metadata for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. READ_ACP: The grantee can read the object ACL for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. WRITE_ACP: The grantee can write the ACL for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. FULL_CONTROL: The grantee has READ, READ_ACP, and WRITE_ACP permissions for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. StorageClass: The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the thumbnails that it stores in your Amazon S3 bucket.{  constructor.7The fields accessible through corresponding lenses are: | :: E F} :: E ~ :: E F :: E F :: E F :: E F :: E   :: E F :: E |.The Amazon Resource Name (ARN) for the preset.}XA section of the response body that provides information about the audio preset values.~`The container type for the output file. Valid values include fmp4, mp3, mp4, ogg, ts, and webm.A description of the preset.bIdentifier for the new preset. You use this value to get settings for the preset or to delete it.The name of the preset.dA section of the response body that provides information about the thumbnail preset values, if any.{Whether the preset is a default preset provided by Elastic Transcoder (System) or a preset that you have defined (Custom).XA section of the response body that provides information about the video preset values. constructor.7The fields accessible through corresponding lenses are: :: E F :: E FThe format you specify determines whether Elastic Transcoder generates an embedded or sidecar caption for this output. Valid Embedded Caption Formats: For MP3: None For MP4: mov-text For MPEG-TS: None For ogg: None For webm: None Valid Sidecar Caption Formats: Elastic Transcoder supports dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. For FMP4: dfxp Non-FMP4 outputs: All sidecar types fmp4 captions have an extension of .ismt.The prefix for caption filenames, in the form description-{language}, where: description is a description of the video. {language} is a literal value that Elastic Transcoder replaces with the two- or three-letter code for the language of the caption in the output file names. If you don't include {language} in the file name pattern, Elastic Transcoder automatically appends "{language}" to the value that you specify for the description. In addition, Elastic Transcoder automatically appends the count to the end of the segment files. For example, suppose you're transcoding into srt format. When you enter "Sydney-{language}-sunrise", and the language of the captions is English (en), the name of the first caption file will be Sydney-en-sunrise00000.srt. constructor.7The fields accessible through corresponding lenses are:  :: E F :: E F :: E F :: E F :: E F :: E F :: E F :: E F :: E F :: E FUThe horizontal position of the watermark unless you specify a non-zero value for HorizontalOffset: Left: The left edge of the watermark is aligned with the left border of the video. Right: The right edge of the watermark is aligned with the right border of the video. Center: The watermark is centered between the left and right borders. The amount by which you want the horizontal position of the watermark to be offset from the position specified by HorizontalAlign: number of pixels (px): The minimum value is 0 pixels, and the maximum value is the value of MaxWidth. integer percentage (%): The range of valid values is 0 to 100. For example, if you specify Left for HorizontalAlign and 5px for HorizontalOffset, the left side of the watermark appears 5 pixels from the left border of the output video. HorizontalOffset is only valid when the value of HorizontalAlign is Left or Right. If you specify an offset that causes the watermark to extend beyond the left or right border and Elastic Transcoder has not added black bars, the watermark is cropped. If Elastic Transcoder has added black bars, the watermark extends into the black bars. If the watermark extends beyond the black bars, it is cropped. Use the value of Target to specify whether you want to include the black bars that are added by Elastic Transcoder, if any, in the offset calculation.iA unique identifier for the settings for one watermark. The value of Id can be up to 40 characters long.The maximum height of the watermark in one of the following formats: number of pixels (px): The minimum value is 16 pixels, and the maximum value is the value of MaxHeight. integer percentage (%): The range of valid values is 0 to 100. Use the value of Target to specify whether you want Elastic Transcoder to include the black bars that are added by Elastic Transcoder, if any, in the calculation. If you specify the value in pixels, it must be less than or equal to the value of MaxHeight.The maximum width of the watermark in one of the following formats: number of pixels (px): The minimum value is 16 pixels, and the maximum value is the value of MaxWidth. integer percentage (%): The range of valid values is 0 to 100. Use the value of Target to specify whether you want Elastic Transcoder to include the black bars that are added by Elastic Transcoder, if any, in the calculation. If you specify the value in pixels, it must be less than or equal to the value of MaxWidth.A percentage that indicates how much you want a watermark to obscure the video in the location where it appears. Valid values are 0 (the watermark is invisible) to 100 (the watermark completely obscures the video in the specified location). The datatype of Opacity is float. Elastic Transcoder supports transparent .png graphics. If you use a transparent .png, the transparent portion of the video appears as if you had specified a value of 0 for Opacity. The .jpg file format doesn't support transparency.A value that controls scaling of the watermark: Fit: Elastic Transcoder scales the watermark so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value. Stretch: Elastic Transcoder stretches the watermark to match the values that you specified for MaxWidth and MaxHeight. If the relative proportions of the watermark and the values of MaxWidth and MaxHeight are different, the watermark will be distorted. ShrinkToFit: Elastic Transcoder scales the watermark down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the watermark up.5A value that determines how Elastic Transcoder interprets values that you specified for HorizontalOffset, VerticalOffset, MaxWidth, and MaxHeight: Content: HorizontalOffset and VerticalOffset values are calculated based on the borders of the video excluding black bars added by Elastic Transcoder, if any. In addition, MaxWidth and MaxHeight, if specified as a percentage, are calculated based on the borders of the video excluding black bars added by Elastic Transcoder, if any. Frame: HorizontalOffset and VerticalOffset values are calculated based on the borders of the video including black bars added by Elastic Transcoder, if any. In addition, MaxWidth and MaxHeight, if specified as a percentage, are calculated based on the borders of the video including black bars added by Elastic Transcoder, if any.QThe vertical position of the watermark unless you specify a non-zero value for VerticalOffset: Top: The top edge of the watermark is aligned with the top border of the video. Bottom: The bottom edge of the watermark is aligned with the bottom border of the video. Center: The watermark is centered between the top and bottom borders.VerticalOffset The amount by which you want the vertical position of the watermark to be offset from the position specified by VerticalAlign: number of pixels (px): The minimum value is 0 pixels, and the maximum value is the value of MaxHeight. integer percentage (%): The range of valid values is 0 to 100. For example, if you specify Top for VerticalAlign and 5px for VerticalOffset, the top of the watermark appears 5 pixels from the top border of the output video. VerticalOffset is only valid when the value of VerticalAlign is Top or Bottom. If you specify an offset that causes the watermark to extend beyond the top or bottom border and Elastic Transcoder has not added black bars, the watermark is cropped. If Elastic Transcoder has added black bars, the watermark extends into the black bars. If the watermark extends beyond the black bars, it is cropped. Use the value of Target to specify whether you want Elastic Transcoder to include the black bars that are added by Elastic Transcoder, if any, in the offset calculation. constructor.7The fields accessible through corresponding lenses are: :: [F] :: E F :: E F_The permission that you want to give to the AWS user that is listed in Grantee. Valid values include: READ: The grantee can read the thumbnails and metadata for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. READ_ACP: The grantee can read the object ACL for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. WRITE_ACP: The grantee can write the ACL for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. FULL_CONTROL: The grantee has READ, READ_ACP, and WRITE_ACP permissions for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket.<The AWS user or group that you want to have access to transcoded files and playlists. To identify the user or group, you can specify the canonical user ID for an AWS account, an origin access identity for a CloudFront distribution, the registered email address of an AWS account, or a predefined Amazon S3 group.The type of value that appears in the Grantee object: Canonical: Either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. A canonical user ID is not the same as an AWS account number. Email: The registered email address of an AWS account. Group: One of the following predefined Amazon S3 groups: AllUsers, AuthenticatedUsers, or LogDelivery. constructor.7The fields accessible through corresponding lenses are: :: E F :: E F :: E F :: I F F :: E F :: E F :: E F :: E F :: E F :: E F :: E F :: E F :: E F :: E F :: [] To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together. The display aspect ratio of the video in the output file. Valid values include: auto, 1:1, 4:3, 3:2, 16:9 If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file. If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level and Profile. If you specify auto, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile: Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile) 1 - 64 : 80 1b - 128 : 160 1.1 - 192 : 240 1.2 - 384 : 480 1.3 - 768 : 960 2 - 2000 : 2500 3 - 10000 : 12500 3.1 - 14000 : 17500 3.2 - 20000 : 25000 4 - 20000 : 25000 4.1 - 50000 : 62500.The video codec for the output file. Valid values include H.264 and vp8. You can only specify vp8 when the container type is webm.Profile The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles: baseline: The profile most commonly used for videoconferencing and for mobile applications. main: The profile used for standard-definition digital TV broadcasts. high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs. Level (H.264 Only) The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels: 1, 1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1 MaxReferenceFrames (H.264 Only) Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following: Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16) where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or Resolution. Maximum decoded picture buffer in macroblocks depends on the value of the Level object. See the list below. (A macroblock is a block of pixels measuring 16x16.) 1 - 396 1b - 396 1.1 - 900 1.2 - 2376 1.3 - 2376 2 - 2376 2.1 - 4752 2.2 - 8100 3 - 8100 3.1 - 18000 3.2 - 20480 4 - 32768 4.1 - 32768 MaxBitRate The maximum number of bits per second in a video buffer; the size of the buffer is specified by BufferSize. Specify a value between 16 and 62,500. You can reduce the bandwidth required to stream a video by reducing the maximum bit rate, but this also reduces the quality of the video. BufferSize The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the standard segment duration when you're using FMP4 or MPEG-TS for the container type of the output video. Specify an integer greater than 0. If you specify MaxBitRate and omit BufferSize, Elastic Transcoder sets BufferSize to 10 times the value of MaxBitRate.KThe value that Elastic Transcoder adds to the metadata in the output file.IWhether to use a fixed value for FixedGOP. Valid values are true and false: true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance between key frames (the number of frames in a group of pictures, or GOP). false: The distance between key frames can vary. FixedGOP must be set to true for fmp4 containers.tThe frames per second for the video stream in the output file. Valid values include: auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60 If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation: Frame rate = maximum recommended decoding speed in luma samplessecond u (width in pixels * height in pixels) where: width in pixels and height in pixels represent the Resolution of the output video. maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level. The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed): 1 - 380160 1b - 380160 1.1 - 76800 1.2 - 1536000 1.3 - 3041280 2 - 3041280 2.1 - 5068800 2.2 - 5184000 3 - 10368000 3.1 - 27648000 3.2 - 55296000 4 - 62914560 4.1 - 62914560.The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality. For Smooth outputs, the FrameRate must have a constant ratio to the KeyframesMaxDist. This allows Smooth playlists to switch between different quality levels while the file is being played. For example, an input file can have a FrameRate of 30 with a KeyframesMaxDist of 90. The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and 30, respectively. Alternately, this can be achieved by setting FrameRate to auto and having the same values for MaxFrameRate and KeyframesMaxDist.wIf you specify auto for FrameRate, Elastic Transcoder uses the frame rate of the input video for the frame rate of the output video. Specify the maximum frame rate that you want Elastic Transcoder to use when the frame rate of the input video is greater than the desired maximum frame rate of the output video. Valid values include: 10, 15, 23.97, 24, 25, 29.97, 30, 60.The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together. The width and height of the video in the output file, in pixels. Valid values are auto and width x height: auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules. width x height: The width and height of the output video in pixels. Note the following about specifying the width and height: The width must be an even integer between 128 and 4096, inclusive. The height must be an even integer between 96 and 3072, inclusive. If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution. If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution. We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value): 1 - 25344 1b - 25344 1.1 - 101376 1.2 - 101376 1.3 - 101376 2 - 101376 2.1 - 202752 2.2 - 404720 3 - 404720 3.1 - 921600 3.2 - 1310720 4 - 2097152 4.1 - 2097152.Specify one of the following values to control scaling of the output video: Fit: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value. Fill: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum value. Stretch: Elastic Transcoder stretches the output video to match the values that you specified for MaxWidth and MaxHeight. If the relative proportions of the input video and the output video are different, the output video will be distorted. Keep: Elastic Transcoder does not scale the output video. If either dimension of the input video exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder crops the output video. ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the video up. ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale the video up.ESettings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos that are transcoded using this preset. You can specify settings for up to four watermarks. Watermarks appear in the specified size and location, and with the specified opacity for the duration of the transcoded video. Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency. When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions. constructor.7The fields accessible through corresponding lenses are: :: E F :: E F :: [F] :: E F :: E FSThe format of the output playlist. Valid formats include HLSv3, HLSv4, and Smooth.BThe name that you want Elastic Transcoder to assign to the master playlist, for example, nyc-vacation.m3u8. If the name includes a / character, the section of the name before the last / must be identical for all Name objects. If you create more than one master playlist, the values of all Name objects must be unique. Note: Elastic Transcoder automatically appends the relevant file extension to the file name (.m3u8 for HLSv3 and HLSv4 playlists, and .ism and .ismc for Smooth playlists). If you include a file extension in Name, the file name will have two extensions.For each output in this job that you want to include in a master playlist, the value of the Outputs:Key object. If your output is not HLS or does not have a segment duration set, the name of the output file is a concatenation of OutputKeyPrefix and Outputs:Key: OutputKeyPrefixOutputs:Key If your output is HLSv3 and has a segment duration set, or is not included in a playlist, Elastic Transcoder creates an output playlist file with a file extension of .m3u8, and a series of .ts files that include a five-digit sequential counter beginning with 00000: OutputKeyPrefixOutputs:Key.m3u8 OutputKeyPrefixOutputs:Key00000.ts If your output is HLSv4, has a segment duration set, and is included in an HLSv4 playlist, Elastic Transcoder creates an output playlist file with a file extension of _v4.m3u8. If the output is video, Elastic Transcoder also creates an output file with an extension of _iframe.m3u8: OutputKeyPrefixOutputs:Key_v4.m3u8 OutputKeyPrefixOutputs:Key_iframe.m3u8 OutputKeyPrefixOutputs:Key.ts Elastic Transcoder automatically appends the relevant file extension to the file name. If you include a file extension in Output Key, the file name will have two extensions. If you include more than one output in a playlist, any segment duration settings, clip settings, or caption settings must be the same for all outputs in the playlist. For Smooth playlists, the Audio:Profile, Video:Profile, and Video:FrameRate to Video:KeyframesMaxDist ratio must be the same for all outputs.<The status of the job with which the playlist is associated.-Information that further explains the status. constructor.7The fields accessible through corresponding lenses are: :: E F :: E F :: E F :: E FfThe Amazon SNS topic that you want to notify when Elastic Transcoder has finished processing the job.dThe Amazon SNS topic that you want to notify when Elastic Transcoder encounters an error condition.The Amazon Simple Notification Service (Amazon SNS) topic that you want to notify when Elastic Transcoder has started to process the job.eThe Amazon SNS topic that you want to notify when Elastic Transcoder encounters a warning condition. constructor.7The fields accessible through corresponding lenses are: :: E ASettings that determine when a clip begins and how long it lasts. constructor.7The fields accessible through corresponding lenses are: :: E F :: E F :: E F :: E F :: E F :: E FrThe aspect ratio of the input file. If you want Elastic Transcoder to automatically detect the aspect ratio of the input file, specify auto. If you want to specify the aspect ratio for the output file, enter one of the following values: 1:1, 4:3, 3:2, 16:9 If you specify a value other than auto, Elastic Transcoder disables automatic detection of the aspect ratio.`The container type for the input file. If you want Elastic Transcoder to automatically detect the container type of the input file, specify auto. If you want to specify the container type for the input file, enter one of the following values: 3gp, aac, asf, avi, divx, flv, m4a, mkv, mov, mp3, mp4, mpeg, mpeg-ps, mpeg-ts, mxf, ogg, vob, wav, webm.zThe frame rate of the input file. If you want Elastic Transcoder to automatically detect the frame rate of the input file, specify auto. If you want to specify the frame rate for the input file, enter one of the following values: 10, 15, 23.97, 24, 25, 29.97, 30, 60 If you specify a value other than auto, Elastic Transcoder disables automatic detection of the frame rate.hWhether the input file is interlaced. If you want Elastic Transcoder to automatically detect whether the input file is interlaced, specify auto. If you want to specify whether the input file is interlaced, enter one of the following values: true, false If you specify a value other than auto, Elastic Transcoder disables automatic detection of interlacing.The name of the file to transcode. Elsewhere in the body of the JSON block is the the ID of the pipeline to use for processing the job. The InputBucket object in that pipeline tells Elastic Transcoder which Amazon S3 bucket to get the file from. If the file name includes a prefix, such as cooking/lasagna.mpg, include the prefix in the key. If the file isn't in the specified bucket, Elastic Transcoder returns an error.sThis value must be auto, which causes Elastic Transcoder to automatically detect the resolution of the input file.JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~      !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~       !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` abcdefghi jkl mno pqrstuvwxyz {|}~JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq rstuvwxyz{|}~        !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~     None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: E  :: F :: E F :: E F :: E  :: E F :: E  The optional ContentConfig object specifies information about the Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists: which bucket to use, which users you want to have access to the files, the type of access you want users to have, and the storage class that you want to assign to the files. If you specify values for ContentConfig, you must also specify values for ThumbnailConfig. If you specify values for ContentConfig and ThumbnailConfig, omit the OutputBucket object. Bucket: The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. Permissions (Optional): The Permissions object specifies which users you want to have access to transcoded files and the type of access you want them to have. You can grant permissions to a maximum of 30 users and/or predefined Amazon S3 groups. Grantee Type: Specify the type of value that appears in the Grantee object: Canonical: The value in the Grantee object is either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. For more information about canonical user IDs, see Access Control List (ACL) Overview in the Amazon Simple Storage Service Developer Guide. For more information about using CloudFront origin access identities to require that users use CloudFront URLs instead of Amazon S3 URLs, see Using an Origin Access Identity to Restrict Access to Your Amazon S3 Content. A canonical user ID is not the same as an AWS account number. Email: The value in the Grantee object is the registered email address of an AWS account. Group: The value in the Grantee object is one of the following predefined Amazon S3 groups: AllUsers, AuthenticatedUsers, or LogDelivery. Grantee: The AWS user or group that you want to have access to transcoded files and playlists. To identify the user or group, you can specify the canonical user ID for an AWS account, an origin access identity for a CloudFront distribution, the registered email address of an AWS account, or a predefined Amazon S3 group Access: The permission that you want to give to the AWS user that you specified in Grantee. Permissions are granted on the files that Elastic Transcoder adds to the bucket, including playlists and video files. Valid values include: READ: The grantee can read the objects and metadata for objects that Elastic Transcoder adds to the Amazon S3 bucket. READ_ACP: The grantee can read the object ACL for objects that Elastic Transcoder adds to the Amazon S3 bucket. WRITE_ACP: The grantee can write the ACL for the objects that Elastic Transcoder adds to the Amazon S3 bucket. FULL_CONTROL: The grantee has READ, READ_ACP, and WRITE_ACP permissions for the objects that Elastic Transcoder adds to the Amazon S3 bucket. StorageClass: The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the video files and playlists that it stores in your Amazon S3 bucket./The ID of the pipeline that you want to update.The Amazon S3 bucket in which you saved the media files that you want to transcode and the graphics that you want to use as watermarks.The name of the pipeline. We recommend that the name be unique within the AWS account, but uniqueness is not enforced. Constraints: Maximum 40 characters.}The IAM Amazon Resource Name (ARN) for the role that you want Elastic Transcoder to use to transcode jobs for this pipeline. RThe ThumbnailConfig object specifies several values, including the Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files, which users you want to have access to the files, the type of access you want users to have, and the storage class that you want to assign to the files. If you specify values for ContentConfig, you must also specify values for ThumbnailConfig even if you don't want to create thumbnails. If you specify values for ContentConfig and ThumbnailConfig, omit the OutputBucket object. Bucket: The Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files. Permissions (Optional): The Permissions object specifies which users and/or predefined Amazon S3 groups you want to have access to thumbnail files, and the type of access you want them to have. You can grant permissions to a maximum of 30 users and/or predefined Amazon S3 groups. GranteeType: Specify the type of value that appears in the Grantee object: Canonical: The value in the Grantee object is either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. A canonical user ID is not the same as an AWS account number. Email: The value in the Grantee object is the registered email address of an AWS account. Group: The value in the Grantee object is one of the following predefined Amazon S3 groups: AllUsers, AuthenticatedUsers, or LogDelivery. Grantee: The AWS user or group that you want to have access to thumbnail files. To identify the user or group, you can specify the canonical user ID for an AWS account, an origin access identity for a CloudFront distribution, the registered email address of an AWS account, or a predefined Amazon S3 group. Access: The permission that you want to give to the AWS user that you specified in Grantee. Permissions are granted on the thumbnail files that Elastic Transcoder adds to the bucket. Valid values include: READ: The grantee can read the thumbnails and metadata for objects that Elastic Transcoder adds to the Amazon S3 bucket. READ_ACP: The grantee can read the object ACL for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. WRITE_ACP: The grantee can write the ACL for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. FULL_CONTROL: The grantee has READ, READ_ACP, and WRITE_ACP permissions for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. StorageClass: The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the thumbnails that it stores in your Amazon S3 bucket. constructor.7The fields accessible through corresponding lenses are: :: E   !"#$%&'()*+  !"#$%&'()*+None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: F :: SThe identifier of the pipeline for which you want to change notification settings.>The topic ARN for the Amazon Simple Notification Service (Amazon SNS) topic that you want to notify to report job status. To receive notifications, you must also subscribe to the new topic in the Amazon SNS console. Progressing: The topic ARN for the Amazon Simple Notification Service (Amazon SNS) topic that you want to notify when Elastic Transcoder has started to process jobs that are added to this pipeline. This is the ARN that Amazon SNS returned when you created the topic. Completed: The topic ARN for the Amazon SNS topic that you want to notify when Elastic Transcoder has finished processing a job. This is the ARN that Amazon SNS returned when you created the topic. Warning: The topic ARN for the Amazon SNS topic that you want to notify when Elastic Transcoder encounters a warning condition. This is the ARN that Amazon SNS returned when you created the topic. Error: The topic ARN for the Amazon SNS topic that you want to notify when Elastic Transcoder encounters an error condition. This is the ARN that Amazon SNS returned when you created the topic. constructor.7The fields accessible through corresponding lenses are: :: E  MA section of the response body that provides information about the pipeline.,-./0123456 ,-./0123456None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: F :: F)The identifier of the pipeline to update.The desired status of the pipeline: Active: The pipeline is processing jobs. Paused: The pipeline is not currently processing jobs. constructor.7The fields accessible through corresponding lenses are: :: E  MA section of the response body that provides information about the pipeline.789:;<=>?@A 789:;<=>?@ANone (024=BKT constructor.7The fields accessible through corresponding lenses are: :: F :: F :: F :: [F]oThe Amazon S3 bucket that contains media files to be transcoded. The action attempts to read from this bucket.The Amazon S3 bucket that Elastic Transcoder will write transcoded media files to. The action attempts to read from this bucket.ZThe IAM Amazon Resource Name (ARN) for the role that you want Elastic Transcoder to test.The ARNs of one or more Amazon Simple Notification Service (Amazon SNS) topics that you want the action to send a test notification to. constructor.7The fields accessible through corresponding lenses are: :: [F] :: E FIf the Success element contains false, this value is an array of one or more error messages that were generated during the test process.SIf the operation is successful, this value is true; otherwise, the value is false.BCDEFGHIJKLMNO BCDEFGHIJKLMNONone (024=BKT constructor.7The fields accessible through corresponding lenses are: :: FMThe identifier of the preset for which you want to get detailed information. constructor.7The fields accessible through corresponding lenses are: :: E  KA section of the response body that provides information about the preset.PQRSTUVWXY PQRSTUVWXYNone (024=BKT constructor.7The fields accessible through corresponding lenses are: :: F'The identifier of the pipeline to read. constructor.7The fields accessible through corresponding lenses are: :: E  MA section of the response body that provides information about the pipeline.Z[\]^_`abc Z[\]^_`abcNone (024=BKT constructor.7The fields accessible through corresponding lenses are: :: FIThe identifier of the job for which you want to get detailed information. constructor.7The fields accessible through corresponding lenses are: :: E GA section of the response body that provides information about the job.defghijklm defghijklm None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: E F :: E FTo list presets in chronological order by the date and time that they were created, enter true. To list presets in reverse chronological order, enter false.When Elastic Transcoder returns more than one page of results, use pageToken in subsequent GET requests to get each successive page of results. constructor.7The fields accessible through corresponding lenses are: :: E F :: [ ]A value that you use to access the second and subsequent pages of results, if any. When the presets fit on one page or when you've reached the last page of results, the value of NextPageToken is null.An array of Preset objects.nopqrstuvwxyznopqrstuvwxyz None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: E F :: E FTo list pipelines in chronological order by the date and time that they were created, enter true. To list pipelines in reverse chronological order, enter false.When Elastic Transcoder returns more than one page of results, use pageToken in subsequent GET requests to get each successive page of results. constructor.7The fields accessible through corresponding lenses are: :: E F :: [ ]A value that you use to access the second and subsequent pages of results, if any. When the pipelines fit on one page or when you've reached the last page of results, the value of NextPageToken is null.An array of Pipeline objects.{|}~{|}~ None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: E F :: E F :: FTo list jobs in chronological order by the date and time that they were submitted, enter true. To list jobs in reverse chronological order, enter false.When Elastic Transcoder returns more than one page of results, use pageToken in subsequent GET requests to get each successive page of results.To get information about all of the jobs associated with the current AWS account that have a given status, specify the following status: Submitted, Progressing, Complete, Canceled, or Error. constructor.7The fields accessible through corresponding lenses are: :: []  :: E F7An array of Job objects that have the specified status. A value that you use to access the second and subsequent pages of results, if any. When the jobs in the specified pipeline fit on one page or when you've reached the last page of results, the value of NextPageToken is null.      None (024=BKT   constructor.7The fields accessible through corresponding lenses are:  :: E F :: E F :: F To list jobs in chronological order by the date and time that they were submitted, enter true. To list jobs in reverse chronological order, enter false.When Elastic Transcoder returns more than one page of results, use pageToken in subsequent GET requests to get each successive page of results.AThe ID of the pipeline for which you want to get job information.  constructor.7The fields accessible through corresponding lenses are: :: [] :: E F;An array of Job objects that are in the specified pipeline.A value that you use to access the second and subsequent pages of results, if any. When the jobs in the specified pipeline fit on one page or when you've reached the last page of results, the value of NextPageToken is null.                   None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: FMThe identifier of the preset for which you want to get detailed information. constructor.  None (024=BKT constructor.7The fields accessible through corresponding lenses are: :: F7The identifier of the pipeline that you want to delete. constructor.  None (024=BKT  constructor.7The fields accessible through corresponding lenses are:  :: E ! :: F" :: E F# :: F$ :: E  % :: E  BA section of the request body that specifies the audio parameters.!`The container type for the output file. Valid values include fmp4, mp3, mp4, ogg, ts, and webm."A description of the preset.#uThe name of the preset. We recommend that the name be unique within the AWS account, but uniqueness is not enforced.$OA section of the request body that specifies the thumbnail parameters, if any.%BA section of the request body that specifies the video parameters.& constructor.7The fields accessible through corresponding lenses are:' :: E  ( :: E F'[A section of the response body that provides information about the preset that is created.(#If the preset settings don't comply with the standards for the video codec but Elastic Transcoder created the preset, this message explains the reason the preset settings don't meet the standard. Elastic Transcoder created the preset because the settings might produce acceptable output.#! !"#$%&'(  !"#$%&'(  !"#$%&'( !"#$%&'(None (024=BKT +* constructor.7The fields accessible through corresponding lenses are:, :: E - :: F. :: F/ :: E 0 :: E F1 :: F2 :: E , The optional ContentConfig object specifies information about the Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists: which bucket to use, which users you want to have access to the files, the type of access you want users to have, and the storage class that you want to assign to the files. If you specify values for ContentConfig, you must also specify values for ThumbnailConfig. If you specify values for ContentConfig and ThumbnailConfig, omit the OutputBucket object. Bucket: The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded files and playlists. Permissions (Optional): The Permissions object specifies which users you want to have access to transcoded files and the type of access you want them to have. You can grant permissions to a maximum of 30 users and/or predefined Amazon S3 groups. Grantee Type: Specify the type of value that appears in the Grantee object: Canonical: The value in the Grantee object is either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. For more information about canonical user IDs, see Access Control List (ACL) Overview in the Amazon Simple Storage Service Developer Guide. For more information about using CloudFront origin access identities to require that users use CloudFront URLs instead of Amazon S3 URLs, see Using an Origin Access Identity to Restrict Access to Your Amazon S3 Content. A canonical user ID is not the same as an AWS account number. Email: The value in the Grantee object is the registered email address of an AWS account. Group: The value in the Grantee object is one of the following predefined Amazon S3 groups: AllUsers, AuthenticatedUsers, or LogDelivery. Grantee: The AWS user or group that you want to have access to transcoded files and playlists. To identify the user or group, you can specify the canonical user ID for an AWS account, an origin access identity for a CloudFront distribution, the registered email address of an AWS account, or a predefined Amazon S3 group Access: The permission that you want to give to the AWS user that you specified in Grantee. Permissions are granted on the files that Elastic Transcoder adds to the bucket, including playlists and video files. Valid values include: READ: The grantee can read the objects and metadata for objects that Elastic Transcoder adds to the Amazon S3 bucket. READ_ACP: The grantee can read the object ACL for objects that Elastic Transcoder adds to the Amazon S3 bucket. WRITE_ACP: The grantee can write the ACL for the objects that Elastic Transcoder adds to the Amazon S3 bucket. FULL_CONTROL: The grantee has READ, READ_ACP, and WRITE_ACP permissions for the objects that Elastic Transcoder adds to the Amazon S3 bucket. StorageClass: The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the video files and playlists that it stores in your Amazon S3 bucket.-TThe Amazon S3 bucket in which you saved the media files that you want to transcode..The name of the pipeline. We recommend that the name be unique within the AWS account, but uniqueness is not enforced. Constraints: Maximum 40 characters./The Amazon Simple Notification Service (Amazon SNS) topic that you want to notify to report job status. To receive notifications, you must also subscribe to the new topic in the Amazon SNS console. Progressing: The topic ARN for the Amazon Simple Notification Service (Amazon SNS) topic that you want to notify when Elastic Transcoder has started to process a job in this pipeline. This is the ARN that Amazon SNS returned when you created the topic. For more information, see Create a Topic in the Amazon Simple Notification Service Developer Guide. Completed: The topic ARN for the Amazon SNS topic that you want to notify when Elastic Transcoder has finished processing a job in this pipeline. This is the ARN that Amazon SNS returned when you created the topic. Warning: The topic ARN for the Amazon SNS topic that you want to notify when Elastic Transcoder encounters a warning condition while processing a job in this pipeline. This is the ARN that Amazon SNS returned when you created the topic. Error: The topic ARN for the Amazon SNS topic that you want to notify when Elastic Transcoder encounters an error condition while processing a job in this pipeline. This is the ARN that Amazon SNS returned when you created the topic.0OThe Amazon S3 bucket in which you want Elastic Transcoder to save the transcoded files. (Use this, or use ContentConfig:Bucket plus ThumbnailConfig:Bucket.) Specify this value when all of the following are true: You want to save transcoded files, thumbnails (if any), and playlists (if any) together in one bucket. You do not want to specify the users or groups who have access to the transcoded files, thumbnails, and playlists. You do not want to specify the permissions that Elastic Transcoder grants to the files. When Elastic Transcoder saves files in OutputBucket, it grants full control over the files only to the AWS account that owns the role that is specified by Role. You want to associate the transcoded files and thumbnails with the Amazon S3 Standard storage class. If you want to save transcoded files and playlists in one bucket and thumbnails in another bucket, specify which users can access the transcoded files or the permissions the users have, or change the Amazon S3 storage class, omit OutputBucket and specify values for ContentConfig and ThumbnailConfig instead.1pThe IAM Amazon Resource Name (ARN) for the role that you want Elastic Transcoder to use to create the pipeline.2 RThe ThumbnailConfig object specifies several values, including the Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files, which users you want to have access to the files, the type of access you want users to have, and the storage class that you want to assign to the files. If you specify values for ContentConfig, you must also specify values for ThumbnailConfig even if you don't want to create thumbnails. If you specify values for ContentConfig and ThumbnailConfig, omit the OutputBucket object. Bucket: The Amazon S3 bucket in which you want Elastic Transcoder to save thumbnail files. Permissions (Optional): The Permissions object specifies which users and/or predefined Amazon S3 groups you want to have access to thumbnail files, and the type of access you want them to have. You can grant permissions to a maximum of 30 users and/or predefined Amazon S3 groups. GranteeType: Specify the type of value that appears in the Grantee object: Canonical: The value in the Grantee object is either the canonical user ID for an AWS account or an origin access identity for an Amazon CloudFront distribution. A canonical user ID is not the same as an AWS account number. Email: The value in the Grantee object is the registered email address of an AWS account. Group: The value in the Grantee object is one of the following predefined Amazon S3 groups: AllUsers, AuthenticatedUsers, or LogDelivery. Grantee: The AWS user or group that you want to have access to thumbnail files. To identify the user or group, you can specify the canonical user ID for an AWS account, an origin access identity for a CloudFront distribution, the registered email address of an AWS account, or a predefined Amazon S3 group. Access: The permission that you want to give to the AWS user that you specified in Grantee. Permissions are granted on the thumbnail files that Elastic Transcoder adds to the bucket. Valid values include: READ: The grantee can read the thumbnails and metadata for objects that Elastic Transcoder adds to the Amazon S3 bucket. READ_ACP: The grantee can read the object ACL for thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. WRITE_ACP: The grantee can write the ACL for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. FULL_CONTROL: The grantee has READ, READ_ACP, and WRITE_ACP permissions for the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket. StorageClass: The Amazon S3 storage class, Standard or ReducedRedundancy, that you want Elastic Transcoder to assign to the thumbnails that it stores in your Amazon S3 bucket.3) constructor.7The fields accessible through corresponding lenses are:4 :: E  4]A section of the response body that provides information about the pipeline that is created.)*+.-1,-./01234 )*+,-./01234 *+,-./012)34)*+,-./01234None (024=BKT76 constructor.7The fields accessible through corresponding lenses are:8 :: 9 :: E : :: E F; :: []< :: F= :: []8aA section of the request body that provides information about the file that is being transcoded.:The value, if any, that you want Elastic Transcoder to prepend to the names of all files that this job creates, including output files, thumbnails, and playlists.;A section of the request body that provides information about the transcoded (target) files. We recommend that you use the Outputs syntax instead of the Output syntax.<The Id of the pipeline that you want Elastic Transcoder to use for transcoding. The pipeline determines several settings, including the Amazon S3 bucket from which Elastic Transcoder gets the files to transcode and the bucket into which Elastic Transcoder puts the transcoded files.=If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), Playlists contains information about the master playlists that you want Elastic Transcoder to create. The maximum number of master playlists in a job is 30.>5 constructor.7The fields accessible through corresponding lenses are:? :: E ?XA section of the response body that provides information about the job that is created.567<889:;<=>? 56789:;<=>? 6789:;<=5>?56789:;<=>?None (024=BKTBA constructor.7The fields accessible through corresponding lenses are:C :: FCThe identifier of the job that you want to cancel. To get a list of the jobs (including their jobId) that have a status of Submitted, use the ListJobsByStatus API action.D@ constructor. @ABCCD@ABCDABC@D @ABCDNoneE  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~      !"#$%&'()*+,-./0123456789:;<=>?@ABCD !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~                           ! " # $ % & ' ( ) * + , -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-.      !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg  h i  j k l m n o p q r  s t  u v w x y z { | }  ~                !           ) *      ./34?@KLVW amazonka-elastictranscoder-0.0.1#Network.AWS.ElasticTranscoder.Types,Network.AWS.ElasticTranscoder.UpdatePipeline9Network.AWS.ElasticTranscoder.UpdatePipelineNotifications2Network.AWS.ElasticTranscoder.UpdatePipelineStatus&Network.AWS.ElasticTranscoder.TestRole(Network.AWS.ElasticTranscoder.ReadPreset*Network.AWS.ElasticTranscoder.ReadPipeline%Network.AWS.ElasticTranscoder.ReadJob)Network.AWS.ElasticTranscoder.ListPresets+Network.AWS.ElasticTranscoder.ListPipelines.Network.AWS.ElasticTranscoder.ListJobsByStatus0Network.AWS.ElasticTranscoder.ListJobsByPipeline*Network.AWS.ElasticTranscoder.DeletePreset,Network.AWS.ElasticTranscoder.DeletePipeline*Network.AWS.ElasticTranscoder.CreatePreset,Network.AWS.ElasticTranscoder.CreatePipeline'Network.AWS.ElasticTranscoder.CreateJob'Network.AWS.ElasticTranscoder.CancelJobNetwork.AWS.ElasticTranscoderamazonka-core-0.0.1Network.AWS.Error JSONErrorJobInputClip NotificationsPlaylistVideoParameters PermissionPresetWatermark CaptionFormatPresetPipeline JobWatermark JobAlbumArt ThumbnailsAudioParametersCreateJobOutputTimeSpanArtwork CaptionSourceJob' JobOutputAudioCodecOptionsCaptionsCreateJobPlaylistPipelineOutputConfigElasticTranscoderpipelineOutputConfig pocBucketpocPermissionspocStorageClasscreateJobPlaylist cjpFormatcjpName cjpOutputKeyscaptionscCaptionFormatscCaptionSources cMergePolicyaudioCodecOptions acoProfile jobOutput joAlbumArt joCaptions joComposition joDurationjoHeightjoIdjoKey joPresetIdjoRotatejoSegmentDurationjoStatusjoStatusDetailjoThumbnailPattern joWatermarksjoWidthjobjArnjIdjInputjOutputjOutputKeyPrefixjOutputs jPipelineId jPlaylistsjStatus captionSourcecsKeycsLabel csLanguage csTimeOffsetartworkaAlbumArtFormat aInputKey aMaxHeight aMaxWidthaPaddingPolicy aSizingPolicytimeSpan tsDuration tsStartTimecreateJobOutput cjoAlbumArt cjoCaptionscjoCompositioncjoKey cjoPresetId cjoRotatecjoSegmentDurationcjoThumbnailPattern cjoWatermarksaudioParameters apBitRate apChannelsapCodecapCodecOptions apSampleRate thumbnails tAspectRatiotFormat tInterval tMaxHeight tMaxWidthtPaddingPolicy tResolution tSizingPolicy jobAlbumArt jaaArtworkjaaMergePolicy jobWatermark jwInputKeyjwPresetWatermarkIdpipelinepArnpContentConfigpId pInputBucketpNamepNotifications pOutputBucketpRolepStatuspThumbnailConfigpresetp1Arnp1Audio p1Container p1Descriptionp1Idp1Name p1Thumbnailsp1Typep1Video captionFormatcfFormat cfPatternpresetWatermarkpwHorizontalAlignpwHorizontalOffsetpwId pwMaxHeight pwMaxWidth pwOpacitypwSizingPolicypwTargetpwVerticalAlignpwVerticalOffset permissionpAccesspGrantee pGranteeTypevideoParameters vpAspectRatio vpBitRatevpCodecvpCodecOptionsvpDisplayAspectRatio vpFixedGOP vpFrameRatevpKeyframesMaxDistvpMaxFrameRate vpMaxHeight vpMaxWidthvpPaddingPolicy vpResolutionvpSizingPolicy vpWatermarksplaylistp2Formatp2Name p2OutputKeysp2Statusp2StatusDetail notifications nCompletednError nProgressingnWarningclip cTimeSpanjobInput jiAspectRatio jiContainer jiFrameRate jiInterlacedjiKey jiResolutionUpdatePipelineResponseUpdatePipelineupdatePipelineupContentConfigupId upInputBucketupNameupNotificationsupRoleupThumbnailConfigupdatePipelineResponse uprPipeline#UpdatePipelineNotificationsResponseUpdatePipelineNotificationsupdatePipelineNotificationsupnIdupnNotifications#updatePipelineNotificationsResponse upnrPipelineUpdatePipelineStatusResponseUpdatePipelineStatusupdatePipelineStatusupsId upsStatusupdatePipelineStatusResponse upsrPipelineTestRoleResponseTestRoletestRole trInputBuckettrOutputBuckettrRoletrTopicstestRoleResponse trrMessages trrSuccessReadPresetResponse ReadPreset readPresetrpIdreadPresetResponse rprPresetReadPipelineResponse ReadPipeline readPipelinerp1IdreadPipelineResponse rprPipelineReadJobResponseReadJobreadJobrjIdreadJobResponserjrJobListPresetsResponse ListPresets listPresets lp1Ascending lp1PageTokenlistPresetsResponselpr1NextPageToken lpr1PresetsListPipelinesResponse ListPipelines listPipelines lpAscending lpPageTokenlistPipelinesResponselprNextPageToken lprPipelinesListJobsByStatusResponseListJobsByStatuslistJobsByStatus ljbsAscending ljbsPageToken ljbsStatuslistJobsByStatusResponse ljbsrJobsljbsrNextPageTokenListJobsByPipelineResponseListJobsByPipelinelistJobsByPipeline ljbpAscending ljbpPageTokenljbpPipelineIdlistJobsByPipelineResponse ljbprJobsljbprNextPageTokenDeletePresetResponse DeletePreset deletePresetdpIddeletePresetResponseDeletePipelineResponseDeletePipelinedeletePipelinedp1IddeletePipelineResponseCreatePresetResponse CreatePreset createPresetcpAudio cpContainer cpDescriptioncpName cpThumbnailscpVideocreatePresetResponse cprPreset cprWarningCreatePipelineResponseCreatePipelinecreatePipelinecp1ContentConfigcp1InputBucketcp1Namecp1Notificationscp1OutputBucketcp1Rolecp1ThumbnailConfigcreatePipelineResponse cprPipelineCreateJobResponse CreateJob createJobcjInputcjOutputcjOutputKeyPrefix cjOutputs cjPipelineId cjPlaylistscreateJobResponsecjrJobCancelJobResponse CancelJob cancelJobcjIdcancelJobResponsebase Data.MaybeMaybe text-1.2.0.0Data.Text.InternalText integer-gmpGHC.Integer.TypeIntegerghc-prim GHC.TypesIntunordered-containers-0.2.5.1Data.HashMap.BaseHashMap_jiAspectRatio _jiContainer _jiFrameRate _jiInterlaced_jiKey _jiResolution _cTimeSpan _nCompleted_nError _nProgressing _nWarning _p2Format_p2Name _p2OutputKeys _p2Status_p2StatusDetail_vpAspectRatio _vpBitRate_vpCodec_vpCodecOptions_vpDisplayAspectRatio _vpFixedGOP _vpFrameRate_vpKeyframesMaxDist_vpMaxFrameRate _vpMaxHeight _vpMaxWidth_vpPaddingPolicy _vpResolution_vpSizingPolicy _vpWatermarks_pAccess _pGrantee _pGranteeType_pwHorizontalAlign_pwHorizontalOffset_pwId _pwMaxHeight _pwMaxWidth _pwOpacity_pwSizingPolicy _pwTarget_pwVerticalAlign_pwVerticalOffset _cfFormat _cfPattern_p1Arn_p1Audio _p1Container_p1Description_p1Id_p1Name _p1Thumbnails_p1Type_p1Video_pArn_pContentConfig_pId _pInputBucket_pName_pNotifications_pOutputBucket_pRole_pStatus_pThumbnailConfig _jwInputKey_jwPresetWatermarkId _jaaArtwork_jaaMergePolicy _tAspectRatio_tFormat _tInterval _tMaxHeight _tMaxWidth_tPaddingPolicy _tResolution_tSizingPolicy _apBitRate _apChannels_apCodec_apCodecOptions _apSampleRate _cjoAlbumArt _cjoCaptions_cjoComposition_cjoKey _cjoPresetId _cjoRotate_cjoSegmentDuration_cjoThumbnailPattern_cjoWatermarks _tsDuration _tsStartTime_aAlbumArtFormat _aInputKey _aMaxHeight _aMaxWidth_aPaddingPolicy_aSizingPolicy_csKey_csLabel _csLanguage _csTimeOffset_jArn_jId_jInput_jOutput_jOutputKeyPrefix _jOutputs _jPipelineId _jPlaylists_jStatus _joAlbumArt _joCaptions_joComposition _joDuration _joHeight_joId_joKey _joPresetId _joRotate_joSegmentDuration _joStatus_joStatusDetail_joThumbnailPattern _joWatermarks_joWidth _acoProfile_cCaptionFormats_cCaptionSources _cMergePolicy _cjpFormat_cjpName_cjpOutputKeys _pocBucket_pocPermissions_pocStorageClass$fToJSONJobInput$fFromJSONJobInput $fToJSONClip$fFromJSONClip$fToJSONNotifications$fFromJSONNotifications$fToJSONPlaylist$fFromJSONPlaylist$fToJSONVideoParameters$fFromJSONVideoParameters$fToJSONPermission$fFromJSONPermission$fToJSONPresetWatermark$fFromJSONPresetWatermark$fToJSONCaptionFormat$fFromJSONCaptionFormat$fToJSONPreset$fFromJSONPreset$fToJSONPipeline$fFromJSONPipeline$fToJSONJobWatermark$fFromJSONJobWatermark$fToJSONJobAlbumArt$fFromJSONJobAlbumArt$fToJSONThumbnails$fFromJSONThumbnails$fToJSONAudioParameters$fFromJSONAudioParameters$fToJSONCreateJobOutput$fFromJSONCreateJobOutput$fToJSONTimeSpan$fFromJSONTimeSpan$fToJSONArtwork$fFromJSONArtwork$fToJSONCaptionSource$fFromJSONCaptionSource $fToJSONJob'$fFromJSONJob'$fToJSONJobOutput$fFromJSONJobOutput$fToJSONAudioCodecOptions$fFromJSONAudioCodecOptions$fToJSONCaptions$fFromJSONCaptions$fToJSONCreateJobPlaylist$fFromJSONCreateJobPlaylist$fToJSONPipelineOutputConfig$fFromJSONPipelineOutputConfig$fAWSServiceElasticTranscoder _uprPipeline_upContentConfig_upId_upInputBucket_upName_upNotifications_upRole_upThumbnailConfig $fFromJSONUpdatePipelineResponse$fAWSRequestUpdatePipeline$fToJSONUpdatePipeline$fToHeadersUpdatePipeline$fToQueryUpdatePipeline$fToPathUpdatePipeline _upnrPipeline_upnId_upnNotifications-$fFromJSONUpdatePipelineNotificationsResponse'$fAWSRequestUpdatePipelineNotifications#$fToJSONUpdatePipelineNotifications&$fToHeadersUpdatePipelineNotifications$$fToQueryUpdatePipelineNotifications#$fToPathUpdatePipelineNotifications _upsrPipeline_upsId _upsStatus&$fFromJSONUpdatePipelineStatusResponse $fAWSRequestUpdatePipelineStatus$fToJSONUpdatePipelineStatus$fToHeadersUpdatePipelineStatus$fToQueryUpdatePipelineStatus$fToPathUpdatePipelineStatus _trrMessages _trrSuccess_trInputBucket_trOutputBucket_trRole _trTopics$fFromJSONTestRoleResponse$fAWSRequestTestRole$fToJSONTestRole$fToHeadersTestRole$fToQueryTestRole$fToPathTestRole _rprPreset_rpId$fFromJSONReadPresetResponse$fAWSRequestReadPreset$fToJSONReadPreset$fToHeadersReadPreset$fToQueryReadPreset$fToPathReadPreset _rprPipeline_rp1Id$fFromJSONReadPipelineResponse$fAWSRequestReadPipeline$fToJSONReadPipeline$fToHeadersReadPipeline$fToQueryReadPipeline$fToPathReadPipeline_rjrJob_rjId$fFromJSONReadJobResponse$fAWSRequestReadJob$fToJSONReadJob$fToHeadersReadJob$fToQueryReadJob$fToPathReadJob_lpr1NextPageToken _lpr1Presets _lp1Ascending _lp1PageToken$fAWSPagerListPresets$fFromJSONListPresetsResponse$fAWSRequestListPresets$fToJSONListPresets$fToHeadersListPresets$fToQueryListPresets$fToPathListPresets_lprNextPageToken _lprPipelines _lpAscending _lpPageToken$fAWSPagerListPipelines$fFromJSONListPipelinesResponse$fAWSRequestListPipelines$fToJSONListPipelines$fToHeadersListPipelines$fToQueryListPipelines$fToPathListPipelines _ljbsrJobs_ljbsrNextPageToken_ljbsAscending_ljbsPageToken _ljbsStatus$fAWSPagerListJobsByStatus"$fFromJSONListJobsByStatusResponse$fAWSRequestListJobsByStatus$fToJSONListJobsByStatus$fToHeadersListJobsByStatus$fToQueryListJobsByStatus$fToPathListJobsByStatus _ljbprJobs_ljbprNextPageToken_ljbpAscending_ljbpPageToken_ljbpPipelineId$fAWSPagerListJobsByPipeline$$fFromJSONListJobsByPipelineResponse$fAWSRequestListJobsByPipeline$fToJSONListJobsByPipeline$fToHeadersListJobsByPipeline$fToQueryListJobsByPipeline$fToPathListJobsByPipeline_dpId$fAWSRequestDeletePreset$fToJSONDeletePreset$fToHeadersDeletePreset$fToQueryDeletePreset$fToPathDeletePreset_dp1Id$fAWSRequestDeletePipeline$fToJSONDeletePipeline$fToHeadersDeletePipeline$fToQueryDeletePipeline$fToPathDeletePipeline _cprPreset _cprWarning_cpAudio _cpContainer_cpDescription_cpName _cpThumbnails_cpVideo$fFromJSONCreatePresetResponse$fAWSRequestCreatePreset$fToJSONCreatePreset$fToHeadersCreatePreset$fToQueryCreatePreset$fToPathCreatePreset _cprPipeline_cp1ContentConfig_cp1InputBucket_cp1Name_cp1Notifications_cp1OutputBucket_cp1Role_cp1ThumbnailConfig $fFromJSONCreatePipelineResponse$fAWSRequestCreatePipeline$fToJSONCreatePipeline$fToHeadersCreatePipeline$fToQueryCreatePipeline$fToPathCreatePipeline_cjrJob_cjInput _cjOutput_cjOutputKeyPrefix _cjOutputs _cjPipelineId _cjPlaylists$fFromJSONCreateJobResponse$fAWSRequestCreateJob$fToJSONCreateJob$fToHeadersCreateJob$fToQueryCreateJob$fToPathCreateJob_cjId$fAWSRequestCancelJob$fToJSONCancelJob$fToHeadersCancelJob$fToQueryCancelJob$fToPathCancelJob