{-# LANGUAGE DeriveGeneric #-}
{-# LANGUAGE DuplicateRecordFields #-}
{-# LANGUAGE NamedFieldPuns #-}
{-# LANGUAGE OverloadedStrings #-}
{-# LANGUAGE RecordWildCards #-}
{-# LANGUAGE StrictData #-}
{-# LANGUAGE TypeFamilies #-}
{-# LANGUAGE NoImplicitPrelude #-}
{-# OPTIONS_GHC -fno-warn-unused-binds #-}
{-# OPTIONS_GHC -fno-warn-unused-imports #-}
{-# OPTIONS_GHC -fno-warn-unused-matches #-}

-- Derived from AWS service descriptions, licensed under Apache 2.0.

-- |
-- Module      : Amazonka.Route53.TestDNSAnswer
-- Copyright   : (c) 2013-2023 Brendan Hay
-- License     : Mozilla Public License, v. 2.0.
-- Maintainer  : Brendan Hay
-- Stability   : auto-generated
-- Portability : non-portable (GHC extensions)
--
-- Gets the value that Amazon Route 53 returns in response to a DNS request
-- for a specified record name and type. You can optionally specify the IP
-- address of a DNS resolver, an EDNS0 client subnet IP address, and a
-- subnet mask.
--
-- This call only supports querying public hosted zones.
module Amazonka.Route53.TestDNSAnswer
  ( -- * Creating a Request
    TestDNSAnswer (..),
    newTestDNSAnswer,

    -- * Request Lenses
    testDNSAnswer_eDNS0ClientSubnetIP,
    testDNSAnswer_eDNS0ClientSubnetMask,
    testDNSAnswer_resolverIP,
    testDNSAnswer_hostedZoneId,
    testDNSAnswer_recordName,
    testDNSAnswer_recordType,

    -- * Destructuring the Response
    TestDNSAnswerResponse (..),
    newTestDNSAnswerResponse,

    -- * Response Lenses
    testDNSAnswerResponse_httpStatus,
    testDNSAnswerResponse_nameserver,
    testDNSAnswerResponse_recordName,
    testDNSAnswerResponse_recordType,
    testDNSAnswerResponse_recordData,
    testDNSAnswerResponse_responseCode,
    testDNSAnswerResponse_protocol,
  )
where

import qualified Amazonka.Core as Core
import qualified Amazonka.Core.Lens.Internal as Lens
import qualified Amazonka.Data as Data
import qualified Amazonka.Prelude as Prelude
import qualified Amazonka.Request as Request
import qualified Amazonka.Response as Response
import Amazonka.Route53.Types

-- | Gets the value that Amazon Route 53 returns in response to a DNS request
-- for a specified record name and type. You can optionally specify the IP
-- address of a DNS resolver, an EDNS0 client subnet IP address, and a
-- subnet mask.
--
-- /See:/ 'newTestDNSAnswer' smart constructor.
data TestDNSAnswer = TestDNSAnswer'
  { -- | If the resolver that you specified for resolverip supports EDNS0,
    -- specify the IPv4 or IPv6 address of a client in the applicable location,
    -- for example, @192.0.2.44@ or @2001:db8:85a3::8a2e:370:7334@.
    eDNS0ClientSubnetIP :: Prelude.Maybe Prelude.Text,
    -- | If you specify an IP address for @edns0clientsubnetip@, you can
    -- optionally specify the number of bits of the IP address that you want
    -- the checking tool to include in the DNS query. For example, if you
    -- specify @192.0.2.44@ for @edns0clientsubnetip@ and @24@ for
    -- @edns0clientsubnetmask@, the checking tool will simulate a request from
    -- 192.0.2.0\/24. The default value is 24 bits for IPv4 addresses and 64
    -- bits for IPv6 addresses.
    --
    -- The range of valid values depends on whether @edns0clientsubnetip@ is an
    -- IPv4 or an IPv6 address:
    --
    -- -   __IPv4__: Specify a value between 0 and 32
    --
    -- -   __IPv6__: Specify a value between 0 and 128
    eDNS0ClientSubnetMask :: Prelude.Maybe Prelude.Text,
    -- | If you want to simulate a request from a specific DNS resolver, specify
    -- the IP address for that resolver. If you omit this value,
    -- @TestDnsAnswer@ uses the IP address of a DNS resolver in the Amazon Web
    -- Services US East (N. Virginia) Region (@us-east-1@).
    resolverIP :: Prelude.Maybe Prelude.Text,
    -- | The ID of the hosted zone that you want Amazon Route 53 to simulate a
    -- query for.
    hostedZoneId :: ResourceId,
    -- | The name of the resource record set that you want Amazon Route 53 to
    -- simulate a query for.
    recordName :: Prelude.Text,
    -- | The type of the resource record set.
    recordType :: RRType
  }
  deriving (Prelude.Eq, Prelude.Read, Prelude.Show, Prelude.Generic)

-- |
-- Create a value of 'TestDNSAnswer' with all optional fields omitted.
--
-- Use <https://hackage.haskell.org/package/generic-lens generic-lens> or <https://hackage.haskell.org/package/optics optics> to modify other optional fields.
--
-- The following record fields are available, with the corresponding lenses provided
-- for backwards compatibility:
--
-- 'eDNS0ClientSubnetIP', 'testDNSAnswer_eDNS0ClientSubnetIP' - If the resolver that you specified for resolverip supports EDNS0,
-- specify the IPv4 or IPv6 address of a client in the applicable location,
-- for example, @192.0.2.44@ or @2001:db8:85a3::8a2e:370:7334@.
--
-- 'eDNS0ClientSubnetMask', 'testDNSAnswer_eDNS0ClientSubnetMask' - If you specify an IP address for @edns0clientsubnetip@, you can
-- optionally specify the number of bits of the IP address that you want
-- the checking tool to include in the DNS query. For example, if you
-- specify @192.0.2.44@ for @edns0clientsubnetip@ and @24@ for
-- @edns0clientsubnetmask@, the checking tool will simulate a request from
-- 192.0.2.0\/24. The default value is 24 bits for IPv4 addresses and 64
-- bits for IPv6 addresses.
--
-- The range of valid values depends on whether @edns0clientsubnetip@ is an
-- IPv4 or an IPv6 address:
--
-- -   __IPv4__: Specify a value between 0 and 32
--
-- -   __IPv6__: Specify a value between 0 and 128
--
-- 'resolverIP', 'testDNSAnswer_resolverIP' - If you want to simulate a request from a specific DNS resolver, specify
-- the IP address for that resolver. If you omit this value,
-- @TestDnsAnswer@ uses the IP address of a DNS resolver in the Amazon Web
-- Services US East (N. Virginia) Region (@us-east-1@).
--
-- 'hostedZoneId', 'testDNSAnswer_hostedZoneId' - The ID of the hosted zone that you want Amazon Route 53 to simulate a
-- query for.
--
-- 'recordName', 'testDNSAnswer_recordName' - The name of the resource record set that you want Amazon Route 53 to
-- simulate a query for.
--
-- 'recordType', 'testDNSAnswer_recordType' - The type of the resource record set.
newTestDNSAnswer ::
  -- | 'hostedZoneId'
  ResourceId ->
  -- | 'recordName'
  Prelude.Text ->
  -- | 'recordType'
  RRType ->
  TestDNSAnswer
newTestDNSAnswer
  pHostedZoneId_
  pRecordName_
  pRecordType_ =
    TestDNSAnswer'
      { eDNS0ClientSubnetIP =
          Prelude.Nothing,
        eDNS0ClientSubnetMask = Prelude.Nothing,
        resolverIP = Prelude.Nothing,
        hostedZoneId = pHostedZoneId_,
        recordName = pRecordName_,
        recordType = pRecordType_
      }

-- | If the resolver that you specified for resolverip supports EDNS0,
-- specify the IPv4 or IPv6 address of a client in the applicable location,
-- for example, @192.0.2.44@ or @2001:db8:85a3::8a2e:370:7334@.
testDNSAnswer_eDNS0ClientSubnetIP :: Lens.Lens' TestDNSAnswer (Prelude.Maybe Prelude.Text)
testDNSAnswer_eDNS0ClientSubnetIP = Lens.lens (\TestDNSAnswer' {eDNS0ClientSubnetIP} -> eDNS0ClientSubnetIP) (\s@TestDNSAnswer' {} a -> s {eDNS0ClientSubnetIP = a} :: TestDNSAnswer)

-- | If you specify an IP address for @edns0clientsubnetip@, you can
-- optionally specify the number of bits of the IP address that you want
-- the checking tool to include in the DNS query. For example, if you
-- specify @192.0.2.44@ for @edns0clientsubnetip@ and @24@ for
-- @edns0clientsubnetmask@, the checking tool will simulate a request from
-- 192.0.2.0\/24. The default value is 24 bits for IPv4 addresses and 64
-- bits for IPv6 addresses.
--
-- The range of valid values depends on whether @edns0clientsubnetip@ is an
-- IPv4 or an IPv6 address:
--
-- -   __IPv4__: Specify a value between 0 and 32
--
-- -   __IPv6__: Specify a value between 0 and 128
testDNSAnswer_eDNS0ClientSubnetMask :: Lens.Lens' TestDNSAnswer (Prelude.Maybe Prelude.Text)
testDNSAnswer_eDNS0ClientSubnetMask = Lens.lens (\TestDNSAnswer' {eDNS0ClientSubnetMask} -> eDNS0ClientSubnetMask) (\s@TestDNSAnswer' {} a -> s {eDNS0ClientSubnetMask = a} :: TestDNSAnswer)

-- | If you want to simulate a request from a specific DNS resolver, specify
-- the IP address for that resolver. If you omit this value,
-- @TestDnsAnswer@ uses the IP address of a DNS resolver in the Amazon Web
-- Services US East (N. Virginia) Region (@us-east-1@).
testDNSAnswer_resolverIP :: Lens.Lens' TestDNSAnswer (Prelude.Maybe Prelude.Text)
testDNSAnswer_resolverIP = Lens.lens (\TestDNSAnswer' {resolverIP} -> resolverIP) (\s@TestDNSAnswer' {} a -> s {resolverIP = a} :: TestDNSAnswer)

-- | The ID of the hosted zone that you want Amazon Route 53 to simulate a
-- query for.
testDNSAnswer_hostedZoneId :: Lens.Lens' TestDNSAnswer ResourceId
testDNSAnswer_hostedZoneId = Lens.lens (\TestDNSAnswer' {hostedZoneId} -> hostedZoneId) (\s@TestDNSAnswer' {} a -> s {hostedZoneId = a} :: TestDNSAnswer)

-- | The name of the resource record set that you want Amazon Route 53 to
-- simulate a query for.
testDNSAnswer_recordName :: Lens.Lens' TestDNSAnswer Prelude.Text
testDNSAnswer_recordName = Lens.lens (\TestDNSAnswer' {recordName} -> recordName) (\s@TestDNSAnswer' {} a -> s {recordName = a} :: TestDNSAnswer)

-- | The type of the resource record set.
testDNSAnswer_recordType :: Lens.Lens' TestDNSAnswer RRType
testDNSAnswer_recordType = Lens.lens (\TestDNSAnswer' {recordType} -> recordType) (\s@TestDNSAnswer' {} a -> s {recordType = a} :: TestDNSAnswer)

instance Core.AWSRequest TestDNSAnswer where
  type
    AWSResponse TestDNSAnswer =
      TestDNSAnswerResponse
  request overrides =
    Request.get (overrides defaultService)
  response =
    Response.receiveXML
      ( \s h x ->
          TestDNSAnswerResponse'
            Prelude.<$> (Prelude.pure (Prelude.fromEnum s))
            Prelude.<*> (x Data..@ "Nameserver")
            Prelude.<*> (x Data..@ "RecordName")
            Prelude.<*> (x Data..@ "RecordType")
            Prelude.<*> ( x
                            Data..@? "RecordData"
                            Core..!@ Prelude.mempty
                            Prelude.>>= Data.parseXMLList "RecordDataEntry"
                        )
            Prelude.<*> (x Data..@ "ResponseCode")
            Prelude.<*> (x Data..@ "Protocol")
      )

instance Prelude.Hashable TestDNSAnswer where
  hashWithSalt _salt TestDNSAnswer' {..} =
    _salt
      `Prelude.hashWithSalt` eDNS0ClientSubnetIP
      `Prelude.hashWithSalt` eDNS0ClientSubnetMask
      `Prelude.hashWithSalt` resolverIP
      `Prelude.hashWithSalt` hostedZoneId
      `Prelude.hashWithSalt` recordName
      `Prelude.hashWithSalt` recordType

instance Prelude.NFData TestDNSAnswer where
  rnf TestDNSAnswer' {..} =
    Prelude.rnf eDNS0ClientSubnetIP
      `Prelude.seq` Prelude.rnf eDNS0ClientSubnetMask
      `Prelude.seq` Prelude.rnf resolverIP
      `Prelude.seq` Prelude.rnf hostedZoneId
      `Prelude.seq` Prelude.rnf recordName
      `Prelude.seq` Prelude.rnf recordType

instance Data.ToHeaders TestDNSAnswer where
  toHeaders = Prelude.const Prelude.mempty

instance Data.ToPath TestDNSAnswer where
  toPath = Prelude.const "/2013-04-01/testdnsanswer"

instance Data.ToQuery TestDNSAnswer where
  toQuery TestDNSAnswer' {..} =
    Prelude.mconcat
      [ "edns0clientsubnetip" Data.=: eDNS0ClientSubnetIP,
        "edns0clientsubnetmask"
          Data.=: eDNS0ClientSubnetMask,
        "resolverip" Data.=: resolverIP,
        "hostedzoneid" Data.=: hostedZoneId,
        "recordname" Data.=: recordName,
        "recordtype" Data.=: recordType
      ]

-- | A complex type that contains the response to a @TestDNSAnswer@ request.
--
-- /See:/ 'newTestDNSAnswerResponse' smart constructor.
data TestDNSAnswerResponse = TestDNSAnswerResponse'
  { -- | The response's http status code.
    httpStatus :: Prelude.Int,
    -- | The Amazon Route 53 name server used to respond to the request.
    nameserver :: Prelude.Text,
    -- | The name of the resource record set that you submitted a request for.
    recordName :: Prelude.Text,
    -- | The type of the resource record set that you submitted a request for.
    recordType :: RRType,
    -- | A list that contains values that Amazon Route 53 returned for this
    -- resource record set.
    recordData :: [Prelude.Text],
    -- | A code that indicates whether the request is valid or not. The most
    -- common response code is @NOERROR@, meaning that the request is valid. If
    -- the response is not valid, Amazon Route 53 returns a response code that
    -- describes the error. For a list of possible response codes, see
    -- <http://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6 DNS RCODES>
    -- on the IANA website.
    responseCode :: Prelude.Text,
    -- | The protocol that Amazon Route 53 used to respond to the request, either
    -- @UDP@ or @TCP@.
    protocol :: Prelude.Text
  }
  deriving (Prelude.Eq, Prelude.Read, Prelude.Show, Prelude.Generic)

-- |
-- Create a value of 'TestDNSAnswerResponse' with all optional fields omitted.
--
-- Use <https://hackage.haskell.org/package/generic-lens generic-lens> or <https://hackage.haskell.org/package/optics optics> to modify other optional fields.
--
-- The following record fields are available, with the corresponding lenses provided
-- for backwards compatibility:
--
-- 'httpStatus', 'testDNSAnswerResponse_httpStatus' - The response's http status code.
--
-- 'nameserver', 'testDNSAnswerResponse_nameserver' - The Amazon Route 53 name server used to respond to the request.
--
-- 'recordName', 'testDNSAnswerResponse_recordName' - The name of the resource record set that you submitted a request for.
--
-- 'recordType', 'testDNSAnswerResponse_recordType' - The type of the resource record set that you submitted a request for.
--
-- 'recordData', 'testDNSAnswerResponse_recordData' - A list that contains values that Amazon Route 53 returned for this
-- resource record set.
--
-- 'responseCode', 'testDNSAnswerResponse_responseCode' - A code that indicates whether the request is valid or not. The most
-- common response code is @NOERROR@, meaning that the request is valid. If
-- the response is not valid, Amazon Route 53 returns a response code that
-- describes the error. For a list of possible response codes, see
-- <http://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6 DNS RCODES>
-- on the IANA website.
--
-- 'protocol', 'testDNSAnswerResponse_protocol' - The protocol that Amazon Route 53 used to respond to the request, either
-- @UDP@ or @TCP@.
newTestDNSAnswerResponse ::
  -- | 'httpStatus'
  Prelude.Int ->
  -- | 'nameserver'
  Prelude.Text ->
  -- | 'recordName'
  Prelude.Text ->
  -- | 'recordType'
  RRType ->
  -- | 'responseCode'
  Prelude.Text ->
  -- | 'protocol'
  Prelude.Text ->
  TestDNSAnswerResponse
newTestDNSAnswerResponse
  pHttpStatus_
  pNameserver_
  pRecordName_
  pRecordType_
  pResponseCode_
  pProtocol_ =
    TestDNSAnswerResponse'
      { httpStatus = pHttpStatus_,
        nameserver = pNameserver_,
        recordName = pRecordName_,
        recordType = pRecordType_,
        recordData = Prelude.mempty,
        responseCode = pResponseCode_,
        protocol = pProtocol_
      }

-- | The response's http status code.
testDNSAnswerResponse_httpStatus :: Lens.Lens' TestDNSAnswerResponse Prelude.Int
testDNSAnswerResponse_httpStatus = Lens.lens (\TestDNSAnswerResponse' {httpStatus} -> httpStatus) (\s@TestDNSAnswerResponse' {} a -> s {httpStatus = a} :: TestDNSAnswerResponse)

-- | The Amazon Route 53 name server used to respond to the request.
testDNSAnswerResponse_nameserver :: Lens.Lens' TestDNSAnswerResponse Prelude.Text
testDNSAnswerResponse_nameserver = Lens.lens (\TestDNSAnswerResponse' {nameserver} -> nameserver) (\s@TestDNSAnswerResponse' {} a -> s {nameserver = a} :: TestDNSAnswerResponse)

-- | The name of the resource record set that you submitted a request for.
testDNSAnswerResponse_recordName :: Lens.Lens' TestDNSAnswerResponse Prelude.Text
testDNSAnswerResponse_recordName = Lens.lens (\TestDNSAnswerResponse' {recordName} -> recordName) (\s@TestDNSAnswerResponse' {} a -> s {recordName = a} :: TestDNSAnswerResponse)

-- | The type of the resource record set that you submitted a request for.
testDNSAnswerResponse_recordType :: Lens.Lens' TestDNSAnswerResponse RRType
testDNSAnswerResponse_recordType = Lens.lens (\TestDNSAnswerResponse' {recordType} -> recordType) (\s@TestDNSAnswerResponse' {} a -> s {recordType = a} :: TestDNSAnswerResponse)

-- | A list that contains values that Amazon Route 53 returned for this
-- resource record set.
testDNSAnswerResponse_recordData :: Lens.Lens' TestDNSAnswerResponse [Prelude.Text]
testDNSAnswerResponse_recordData = Lens.lens (\TestDNSAnswerResponse' {recordData} -> recordData) (\s@TestDNSAnswerResponse' {} a -> s {recordData = a} :: TestDNSAnswerResponse) Prelude.. Lens.coerced

-- | A code that indicates whether the request is valid or not. The most
-- common response code is @NOERROR@, meaning that the request is valid. If
-- the response is not valid, Amazon Route 53 returns a response code that
-- describes the error. For a list of possible response codes, see
-- <http://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6 DNS RCODES>
-- on the IANA website.
testDNSAnswerResponse_responseCode :: Lens.Lens' TestDNSAnswerResponse Prelude.Text
testDNSAnswerResponse_responseCode = Lens.lens (\TestDNSAnswerResponse' {responseCode} -> responseCode) (\s@TestDNSAnswerResponse' {} a -> s {responseCode = a} :: TestDNSAnswerResponse)

-- | The protocol that Amazon Route 53 used to respond to the request, either
-- @UDP@ or @TCP@.
testDNSAnswerResponse_protocol :: Lens.Lens' TestDNSAnswerResponse Prelude.Text
testDNSAnswerResponse_protocol = Lens.lens (\TestDNSAnswerResponse' {protocol} -> protocol) (\s@TestDNSAnswerResponse' {} a -> s {protocol = a} :: TestDNSAnswerResponse)

instance Prelude.NFData TestDNSAnswerResponse where
  rnf TestDNSAnswerResponse' {..} =
    Prelude.rnf httpStatus
      `Prelude.seq` Prelude.rnf nameserver
      `Prelude.seq` Prelude.rnf recordName
      `Prelude.seq` Prelude.rnf recordType
      `Prelude.seq` Prelude.rnf recordData
      `Prelude.seq` Prelude.rnf responseCode
      `Prelude.seq` Prelude.rnf protocol