Amazonka.SecretsManager.Lens

Operations

CancelRotateSecret

cancelRotateSecret_secretId :: Lens' CancelRotateSecret Text

The ARN or name of the secret.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

cancelRotateSecretResponse_arn :: Lens' CancelRotateSecretResponse (Maybe Text)

The ARN of the secret.

cancelRotateSecretResponse_name :: Lens' CancelRotateSecretResponse (Maybe Text)

The name of the secret.

cancelRotateSecretResponse_versionId :: Lens' CancelRotateSecretResponse (Maybe Text)

The unique identifier of the version of the secret created during the rotation. This version might not be complete, and should be evaluated for possible deletion. We recommend that you remove the VersionStage value AWSPENDING from this version so that Secrets Manager can delete it. Failing to clean up a cancelled rotation can block you from starting future rotations.

cancelRotateSecretResponse_httpStatus :: Lens' CancelRotateSecretResponse Int

The response's http status code.

CreateSecret

createSecret_addReplicaRegions :: Lens' CreateSecret (Maybe (NonEmpty ReplicaRegionType))

A list of Regions and KMS keys to replicate secrets.

createSecret_clientRequestToken :: Lens' CreateSecret (Maybe Text)

If you include SecretString or SecretBinary, then Secrets Manager creates an initial version for the secret, and this parameter specifies the unique identifier for the new version.

If you use the Amazon Web Services CLI or one of the Amazon Web Services SDKs to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes it as the value for this parameter in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for the new version and include the value in the request.

This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during a rotation. We recommend that you generate a UUID-type value to ensure uniqueness of your versions within the specified secret.

• If the ClientRequestToken value isn't already associated with a version of the secret then a new version of the secret is created.
• If a version with this value already exists and the version SecretString and SecretBinary values are the same as those in the request, then the request is ignored.
• If a version with this value already exists and that version's SecretString and SecretBinary values are different from those in the request, then the request fails because you cannot modify an existing version. Instead, use PutSecretValue to create a new version.

This value becomes the VersionId of the new version.

createSecret_description :: Lens' CreateSecret (Maybe Text)

The description of the secret.

createSecret_forceOverwriteReplicaSecret :: Lens' CreateSecret (Maybe Bool)

Specifies whether to overwrite a secret with the same name in the destination Region.

createSecret_kmsKeyId :: Lens' CreateSecret (Maybe Text)

The ARN, key ID, or alias of the KMS key that Secrets Manager uses to encrypt the secret value in the secret. An alias is always prefixed by alias/, for example alias/aws/secretsmanager. For more information, see About aliases.

To use a KMS key in a different account, use the key ARN or the alias ARN.

If you don't specify this value, then Secrets Manager uses the key aws/secretsmanager. If that key doesn't yet exist, then Secrets Manager creates it for you automatically the first time it encrypts the secret value.

If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed KMS key.

createSecret_secretBinary :: Lens' CreateSecret (Maybe ByteString)

The binary data to encrypt and store in the new version of the secret. We recommend that you store your binary data in a file and then pass the contents of the file as a parameter.

Either SecretString or SecretBinary must have a value, but not both.

This parameter is not available in the Secrets Manager console.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

createSecret_secretString :: Lens' CreateSecret (Maybe Text)

The text data to encrypt and store in this new version of the secret. We recommend you use a JSON structure of key/value pairs for your secret value.

Either SecretString or SecretBinary must have a value, but not both.

If you create a secret by using the Secrets Manager console then Secrets Manager puts the protected secret text in only the SecretString parameter. The Secrets Manager console stores the information as a JSON structure of key/value pairs that a Lambda rotation function can parse.

createSecret_tags :: Lens' CreateSecret (Maybe [Tag])

A list of tags to attach to the secret. Each tag is a key and value pair of strings in a JSON text string, for example:

[{"Key":"CostCenter","Value":"12345"},{"Key":"environment","Value":"production"}]

Secrets Manager tag key names are case sensitive. A tag with the key "ABC" is a different tag from one with key "abc".

If you check tags in permissions policies as part of your security strategy, then adding or removing a tag can change permissions. If the completion of this operation would result in you losing your permissions for this secret, then Secrets Manager blocks the operation and returns an Access Denied error. For more information, see Control access to secrets using tags and Limit access to identities with tags that match secrets' tags.

For information about how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters. If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.

The following restrictions apply to tags:

• Maximum number of tags per secret: 50
• Maximum key length: 127 Unicode characters in UTF-8
• Maximum value length: 255 Unicode characters in UTF-8
• Tag keys and values are case sensitive.
• Do not use the aws: prefix in your tag names or values because Amazon Web Services reserves it for Amazon Web Services use. You can't edit or delete tag names or values with this prefix. Tags with this prefix do not count against your tags per secret limit.
• If you use your tagging schema across multiple services and resources, other services might have restrictions on allowed characters. Generally allowed characters: letters, spaces, and numbers representable in UTF-8, plus the following special characters: + - = . _ : / @.

createSecret_name :: Lens' CreateSecret Text

The name of the new secret.

The secret name can contain ASCII letters, numbers, and the following characters: /_+=.@-

Do not end your secret name with a hyphen followed by six characters. If you do so, you risk confusion and unexpected results when searching for a secret by partial ARN. Secrets Manager automatically adds a hyphen and six random characters after the secret name at the end of the ARN.

createSecretResponse_arn :: Lens' CreateSecretResponse (Maybe Text)

The ARN of the new secret. The ARN includes the name of the secret followed by six random characters. This ensures that if you create a new secret with the same name as a deleted secret, then users with access to the old secret don't get access to the new secret because the ARNs are different.

createSecretResponse_name :: Lens' CreateSecretResponse (Maybe Text)

The name of the new secret.

createSecretResponse_replicationStatus :: Lens' CreateSecretResponse (Maybe [ReplicationStatusType])

A list of the replicas of this secret and their status:

• Failed, which indicates that the replica was not created.
• InProgress, which indicates that Secrets Manager is in the process of creating the replica.
• InSync, which indicates that the replica was created.

createSecretResponse_versionId :: Lens' CreateSecretResponse (Maybe Text)

The unique identifier associated with the version of the new secret.

createSecretResponse_httpStatus :: Lens' CreateSecretResponse Int

The response's http status code.

DeleteResourcePolicy

deleteResourcePolicy_secretId :: Lens' DeleteResourcePolicy Text

The ARN or name of the secret to delete the attached resource-based policy for.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

deleteResourcePolicyResponse_arn :: Lens' DeleteResourcePolicyResponse (Maybe Text)

The ARN of the secret that the resource-based policy was deleted for.

deleteResourcePolicyResponse_name :: Lens' DeleteResourcePolicyResponse (Maybe Text)

The name of the secret that the resource-based policy was deleted for.

deleteResourcePolicyResponse_httpStatus :: Lens' DeleteResourcePolicyResponse Int

The response's http status code.

DeleteSecret

deleteSecret_forceDeleteWithoutRecovery :: Lens' DeleteSecret (Maybe Bool)

Specifies whether to delete the secret without any recovery window. You can't use both this parameter and RecoveryWindowInDays in the same call. If you don't use either, then Secrets Manager defaults to a 30 day recovery window.

Secrets Manager performs the actual deletion with an asynchronous background process, so there might be a short delay before the secret is permanently deleted. If you delete a secret and then immediately create a secret with the same name, use appropriate back off and retry logic.

Use this parameter with caution. This parameter causes the operation to skip the normal recovery window before the permanent deletion that Secrets Manager would normally impose with the RecoveryWindowInDays parameter. If you delete a secret with the ForceDeleteWithoutRecovery parameter, then you have no opportunity to recover the secret. You lose the secret permanently.

deleteSecret_recoveryWindowInDays :: Lens' DeleteSecret (Maybe Integer)

The number of days from 7 to 30 that Secrets Manager waits before permanently deleting the secret. You can't use both this parameter and ForceDeleteWithoutRecovery in the same call. If you don't use either, then Secrets Manager defaults to a 30 day recovery window.

deleteSecret_secretId :: Lens' DeleteSecret Text

The ARN or name of the secret to delete.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

deleteSecretResponse_arn :: Lens' DeleteSecretResponse (Maybe Text)

The ARN of the secret.

deleteSecretResponse_deletionDate :: Lens' DeleteSecretResponse (Maybe UTCTime)

The date and time after which this secret Secrets Manager can permanently delete this secret, and it can no longer be restored. This value is the date and time of the delete request plus the number of days in RecoveryWindowInDays.

deleteSecretResponse_name :: Lens' DeleteSecretResponse (Maybe Text)

The name of the secret.

deleteSecretResponse_httpStatus :: Lens' DeleteSecretResponse Int

The response's http status code.

DescribeSecret

describeSecret_secretId :: Lens' DescribeSecret Text

The ARN or name of the secret.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

describeSecretResponse_arn :: Lens' DescribeSecretResponse (Maybe Text)

The ARN of the secret.

describeSecretResponse_createdDate :: Lens' DescribeSecretResponse (Maybe UTCTime)

The date the secret was created.

describeSecretResponse_deletedDate :: Lens' DescribeSecretResponse (Maybe UTCTime)

The date the secret is scheduled for deletion. If it is not scheduled for deletion, this field is omitted. When you delete a secret, Secrets Manager requires a recovery window of at least 7 days before deleting the secret. Some time after the deleted date, Secrets Manager deletes the secret, including all of its versions.

If a secret is scheduled for deletion, then its details, including the encrypted secret value, is not accessible. To cancel a scheduled deletion and restore access to the secret, use RestoreSecret.

describeSecretResponse_description :: Lens' DescribeSecretResponse (Maybe Text)

The description of the secret.

describeSecretResponse_kmsKeyId :: Lens' DescribeSecretResponse (Maybe Text)

The key ID or alias ARN of the KMS key that Secrets Manager uses to encrypt the secret value. If the secret is encrypted with the Amazon Web Services managed key aws/secretsmanager, this field is omitted. Secrets created using the console use an KMS key ID.

describeSecretResponse_lastAccessedDate :: Lens' DescribeSecretResponse (Maybe UTCTime)

The date that the secret was last accessed in the Region. This field is omitted if the secret has never been retrieved in the Region.

describeSecretResponse_lastChangedDate :: Lens' DescribeSecretResponse (Maybe UTCTime)

The last date and time that this secret was modified in any way.

describeSecretResponse_lastRotatedDate :: Lens' DescribeSecretResponse (Maybe UTCTime)

The last date and time that Secrets Manager rotated the secret. If the secret isn't configured for rotation, Secrets Manager returns null.

describeSecretResponse_name :: Lens' DescribeSecretResponse (Maybe Text)

The name of the secret.

describeSecretResponse_nextRotationDate :: Lens' DescribeSecretResponse (Maybe UTCTime)

Undocumented member.

describeSecretResponse_owningService :: Lens' DescribeSecretResponse (Maybe Text)

The ID of the service that created this secret. For more information, see Secrets managed by other Amazon Web Services services.

describeSecretResponse_primaryRegion :: Lens' DescribeSecretResponse (Maybe Text)

The Region the secret is in. If a secret is replicated to other Regions, the replicas are listed in ReplicationStatus.

describeSecretResponse_replicationStatus :: Lens' DescribeSecretResponse (Maybe [ReplicationStatusType])

A list of the replicas of this secret and their status:

• Failed, which indicates that the replica was not created.
• InProgress, which indicates that Secrets Manager is in the process of creating the replica.
• InSync, which indicates that the replica was created.

describeSecretResponse_rotationEnabled :: Lens' DescribeSecretResponse (Maybe Bool)

Specifies whether automatic rotation is turned on for this secret.

To turn on rotation, use RotateSecret. To turn off rotation, use CancelRotateSecret.

describeSecretResponse_rotationLambdaARN :: Lens' DescribeSecretResponse (Maybe Text)

The ARN of the Lambda function that Secrets Manager invokes to rotate the secret.

describeSecretResponse_rotationRules :: Lens' DescribeSecretResponse (Maybe RotationRulesType)

The rotation schedule and Lambda function for this secret. If the secret previously had rotation turned on, but it is now turned off, this field shows the previous rotation schedule and rotation function. If the secret never had rotation turned on, this field is omitted.

describeSecretResponse_tags :: Lens' DescribeSecretResponse (Maybe [Tag])

The list of tags attached to the secret. To add tags to a secret, use TagResource. To remove tags, use UntagResource.

describeSecretResponse_versionIdsToStages :: Lens' DescribeSecretResponse (Maybe (HashMap Text (NonEmpty Text)))

A list of the versions of the secret that have staging labels attached. Versions that don't have staging labels are considered deprecated and Secrets Manager can delete them.

Secrets Manager uses staging labels to indicate the status of a secret version during rotation. The three staging labels for rotation are:

• AWSCURRENT, which indicates the current version of the secret.

• AWSPENDING, which indicates the version of the secret that contains new secret information that will become the next current version when rotation finishes.

  During rotation, Secrets Manager creates an AWSPENDING version ID before creating the new secret version. To check if a secret version exists, call GetSecretValue.

• AWSPREVIOUS, which indicates the previous current version of the secret. You can use this as the last known good version.

For more information about rotation and staging labels, see How rotation works.

describeSecretResponse_httpStatus :: Lens' DescribeSecretResponse Int

The response's http status code.

GetRandomPassword

getRandomPassword_excludeCharacters :: Lens' GetRandomPassword (Maybe Text)

A string of the characters that you don't want in the password.

getRandomPassword_excludeLowercase :: Lens' GetRandomPassword (Maybe Bool)

Specifies whether to exclude lowercase letters from the password. If you don't include this switch, the password can contain lowercase letters.

getRandomPassword_excludeNumbers :: Lens' GetRandomPassword (Maybe Bool)

Specifies whether to exclude numbers from the password. If you don't include this switch, the password can contain numbers.

getRandomPassword_excludePunctuation :: Lens' GetRandomPassword (Maybe Bool)

Specifies whether to exclude the following punctuation characters from the password: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~. If you don't include this switch, the password can contain punctuation.

getRandomPassword_excludeUppercase :: Lens' GetRandomPassword (Maybe Bool)

Specifies whether to exclude uppercase letters from the password. If you don't include this switch, the password can contain uppercase letters.

getRandomPassword_includeSpace :: Lens' GetRandomPassword (Maybe Bool)

Specifies whether to include the space character. If you include this switch, the password can contain space characters.

getRandomPassword_passwordLength :: Lens' GetRandomPassword (Maybe Natural)

The length of the password. If you don't include this parameter, the default length is 32 characters.

getRandomPassword_requireEachIncludedType :: Lens' GetRandomPassword (Maybe Bool)

Specifies whether to include at least one upper and lowercase letter, one number, and one punctuation. If you don't include this switch, the password contains at least one of every character type.

getRandomPasswordResponse_randomPassword :: Lens' GetRandomPasswordResponse (Maybe Text)

A string with the password.

getRandomPasswordResponse_httpStatus :: Lens' GetRandomPasswordResponse Int

The response's http status code.

GetResourcePolicy

getResourcePolicy_secretId :: Lens' GetResourcePolicy Text

The ARN or name of the secret to retrieve the attached resource-based policy for.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

getResourcePolicyResponse_arn :: Lens' GetResourcePolicyResponse (Maybe Text)

The ARN of the secret that the resource-based policy was retrieved for.

getResourcePolicyResponse_name :: Lens' GetResourcePolicyResponse (Maybe Text)

The name of the secret that the resource-based policy was retrieved for.

getResourcePolicyResponse_resourcePolicy :: Lens' GetResourcePolicyResponse (Maybe Text)

A JSON-formatted string that contains the permissions policy attached to the secret. For more information about permissions policies, see Authentication and access control for Secrets Manager.

getResourcePolicyResponse_httpStatus :: Lens' GetResourcePolicyResponse Int

The response's http status code.

GetSecretValue

getSecretValue_versionId :: Lens' GetSecretValue (Maybe Text)

The unique identifier of the version of the secret to retrieve. If you include both this parameter and VersionStage, the two parameters must refer to the same secret version. If you don't specify either a VersionStage or VersionId, then Secrets Manager returns the AWSCURRENT version.

This value is typically a UUID-type value with 32 hexadecimal digits.

getSecretValue_versionStage :: Lens' GetSecretValue (Maybe Text)

The staging label of the version of the secret to retrieve.

Secrets Manager uses staging labels to keep track of different versions during the rotation process. If you include both this parameter and VersionId, the two parameters must refer to the same secret version. If you don't specify either a VersionStage or VersionId, Secrets Manager returns the AWSCURRENT version.

getSecretValue_secretId :: Lens' GetSecretValue Text

The ARN or name of the secret to retrieve.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

getSecretValueResponse_arn :: Lens' GetSecretValueResponse (Maybe Text)

The ARN of the secret.

getSecretValueResponse_createdDate :: Lens' GetSecretValueResponse (Maybe UTCTime)

The date and time that this version of the secret was created. If you don't specify which version in VersionId or VersionStage, then Secrets Manager uses the AWSCURRENT version.

getSecretValueResponse_name :: Lens' GetSecretValueResponse (Maybe Text)

The friendly name of the secret.

getSecretValueResponse_secretBinary :: Lens' GetSecretValueResponse (Maybe ByteString)

The decrypted secret value, if the secret value was originally provided as binary data in the form of a byte array. The response parameter represents the binary data as a base64-encoded string.

If the secret was created by using the Secrets Manager console, or if the secret value was originally provided as a string, then this field is omitted. The secret value appears in SecretString instead.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

getSecretValueResponse_secretString :: Lens' GetSecretValueResponse (Maybe Text)

The decrypted secret value, if the secret value was originally provided as a string or through the Secrets Manager console.

If this secret was created by using the console, then Secrets Manager stores the information as a JSON structure of key/value pairs.

getSecretValueResponse_versionId :: Lens' GetSecretValueResponse (Maybe Text)

The unique identifier of this version of the secret.

getSecretValueResponse_versionStages :: Lens' GetSecretValueResponse (Maybe (NonEmpty Text))

A list of all of the staging labels currently attached to this version of the secret.

getSecretValueResponse_httpStatus :: Lens' GetSecretValueResponse Int

The response's http status code.

ListSecretVersionIds

listSecretVersionIds_includeDeprecated :: Lens' ListSecretVersionIds (Maybe Bool)

Specifies whether to include versions of secrets that don't have any staging labels attached to them. Versions without staging labels are considered deprecated and are subject to deletion by Secrets Manager.

listSecretVersionIds_maxResults :: Lens' ListSecretVersionIds (Maybe Natural)

The number of results to include in the response.

If there are more results available, in the response, Secrets Manager includes NextToken. To get the next results, call ListSecretVersionIds again with the value from NextToken.

listSecretVersionIds_nextToken :: Lens' ListSecretVersionIds (Maybe Text)

A token that indicates where the output should continue from, if a previous call did not show all results. To get the next results, call ListSecretVersionIds again with this value.

listSecretVersionIds_secretId :: Lens' ListSecretVersionIds Text

The ARN or name of the secret whose versions you want to list.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

listSecretVersionIdsResponse_arn :: Lens' ListSecretVersionIdsResponse (Maybe Text)

The ARN of the secret.

listSecretVersionIdsResponse_name :: Lens' ListSecretVersionIdsResponse (Maybe Text)

The name of the secret.

listSecretVersionIdsResponse_nextToken :: Lens' ListSecretVersionIdsResponse (Maybe Text)

Secrets Manager includes this value if there's more output available than what is included in the current response. This can occur even when the response includes no values at all, such as when you ask for a filtered view of a long list. To get the next results, call ListSecretVersionIds again with this value.

listSecretVersionIdsResponse_versions :: Lens' ListSecretVersionIdsResponse (Maybe [SecretVersionsListEntry])

A list of the versions of the secret.

listSecretVersionIdsResponse_httpStatus :: Lens' ListSecretVersionIdsResponse Int

The response's http status code.

ListSecrets

listSecrets_filters :: Lens' ListSecrets (Maybe [Filter])

The filters to apply to the list of secrets.

listSecrets_includePlannedDeletion :: Lens' ListSecrets (Maybe Bool)

Undocumented member.

listSecrets_maxResults :: Lens' ListSecrets (Maybe Natural)

The number of results to include in the response.

If there are more results available, in the response, Secrets Manager includes NextToken. To get the next results, call ListSecrets again with the value from NextToken.

listSecrets_nextToken :: Lens' ListSecrets (Maybe Text)

A token that indicates where the output should continue from, if a previous call did not show all results. To get the next results, call ListSecrets again with this value.

listSecrets_sortOrder :: Lens' ListSecrets (Maybe SortOrderType)

Secrets are listed by CreatedDate.

listSecretsResponse_nextToken :: Lens' ListSecretsResponse (Maybe Text)

Secrets Manager includes this value if there's more output available than what is included in the current response. This can occur even when the response includes no values at all, such as when you ask for a filtered view of a long list. To get the next results, call ListSecrets again with this value.

listSecretsResponse_secretList :: Lens' ListSecretsResponse (Maybe [SecretListEntry])

A list of the secrets in the account.

listSecretsResponse_httpStatus :: Lens' ListSecretsResponse Int

The response's http status code.

PutResourcePolicy

putResourcePolicy_blockPublicPolicy :: Lens' PutResourcePolicy (Maybe Bool)

Specifies whether to block resource-based policies that allow broad access to the secret, for example those that use a wildcard for the principal.

putResourcePolicy_secretId :: Lens' PutResourcePolicy Text

The ARN or name of the secret to attach the resource-based policy.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

putResourcePolicy_resourcePolicy :: Lens' PutResourcePolicy Text

A JSON-formatted string for an Amazon Web Services resource-based policy. For example policies, see Permissions policy examples.

putResourcePolicyResponse_arn :: Lens' PutResourcePolicyResponse (Maybe Text)

The ARN of the secret.

putResourcePolicyResponse_name :: Lens' PutResourcePolicyResponse (Maybe Text)

The name of the secret.

putResourcePolicyResponse_httpStatus :: Lens' PutResourcePolicyResponse Int

The response's http status code.

PutSecretValue

putSecretValue_clientRequestToken :: Lens' PutSecretValue (Maybe Text)

A unique identifier for the new version of the secret.

If you use the Amazon Web Services CLI or one of the Amazon Web Services SDKs to call this operation, then you can leave this parameter empty because they generate a random UUID for you. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.

This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the Lambda rotation function processing. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.

• If the ClientRequestToken value isn't already associated with a version of the secret then a new version of the secret is created.
• If a version with this value already exists and that version's SecretString or SecretBinary values are the same as those in the request then the request is ignored. The operation is idempotent.
• If a version with this value already exists and the version of the SecretString and SecretBinary values are different from those in the request, then the request fails because you can't modify a secret version. You can only create new versions to store new secret values.

This value becomes the VersionId of the new version.

putSecretValue_secretBinary :: Lens' PutSecretValue (Maybe ByteString)

The binary data to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then pass the contents of the file as a parameter.

You must include SecretBinary or SecretString, but not both.

You can't access this value from the Secrets Manager console.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

putSecretValue_secretString :: Lens' PutSecretValue (Maybe Text)

The text to encrypt and store in the new version of the secret.

You must include SecretBinary or SecretString, but not both.

We recommend you create the secret string as JSON key/value pairs, as shown in the example.

putSecretValue_versionStages :: Lens' PutSecretValue (Maybe (NonEmpty Text))

A list of staging labels to attach to this version of the secret. Secrets Manager uses staging labels to track versions of a secret through the rotation process.

If you specify a staging label that's already associated with a different version of the same secret, then Secrets Manager removes the label from the other version and attaches it to this version. If you specify AWSCURRENT, and it is already attached to another version, then Secrets Manager also moves the staging label AWSPREVIOUS to the version that AWSCURRENT was removed from.

If you don't include VersionStages, then Secrets Manager automatically moves the staging label AWSCURRENT to this version.

putSecretValue_secretId :: Lens' PutSecretValue Text

The ARN or name of the secret to add a new version to.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

If the secret doesn't already exist, use CreateSecret instead.

putSecretValueResponse_arn :: Lens' PutSecretValueResponse (Maybe Text)

The ARN of the secret.

putSecretValueResponse_name :: Lens' PutSecretValueResponse (Maybe Text)

The name of the secret.

putSecretValueResponse_versionId :: Lens' PutSecretValueResponse (Maybe Text)

The unique identifier of the version of the secret.

putSecretValueResponse_versionStages :: Lens' PutSecretValueResponse (Maybe (NonEmpty Text))

The list of staging labels that are currently attached to this version of the secret. Secrets Manager uses staging labels to track a version as it progresses through the secret rotation process.

putSecretValueResponse_httpStatus :: Lens' PutSecretValueResponse Int

The response's http status code.

RemoveRegionsFromReplication

removeRegionsFromReplication_secretId :: Lens' RemoveRegionsFromReplication Text

The ARN or name of the secret.

removeRegionsFromReplication_removeReplicaRegions :: Lens' RemoveRegionsFromReplication (NonEmpty Text)

The Regions of the replicas to remove.

removeRegionsFromReplicationResponse_arn :: Lens' RemoveRegionsFromReplicationResponse (Maybe Text)

The ARN of the primary secret.

removeRegionsFromReplicationResponse_replicationStatus :: Lens' RemoveRegionsFromReplicationResponse (Maybe [ReplicationStatusType])

The status of replicas for this secret after you remove Regions.

removeRegionsFromReplicationResponse_httpStatus :: Lens' RemoveRegionsFromReplicationResponse Int

The response's http status code.

ReplicateSecretToRegions

replicateSecretToRegions_forceOverwriteReplicaSecret :: Lens' ReplicateSecretToRegions (Maybe Bool)

Specifies whether to overwrite a secret with the same name in the destination Region.

replicateSecretToRegions_secretId :: Lens' ReplicateSecretToRegions Text

The ARN or name of the secret to replicate.

replicateSecretToRegions_addReplicaRegions :: Lens' ReplicateSecretToRegions (NonEmpty ReplicaRegionType)

A list of Regions in which to replicate the secret.

replicateSecretToRegionsResponse_arn :: Lens' ReplicateSecretToRegionsResponse (Maybe Text)

The ARN of the primary secret.

replicateSecretToRegionsResponse_replicationStatus :: Lens' ReplicateSecretToRegionsResponse (Maybe [ReplicationStatusType])

The status of replication.

replicateSecretToRegionsResponse_httpStatus :: Lens' ReplicateSecretToRegionsResponse Int

The response's http status code.

RestoreSecret

restoreSecret_secretId :: Lens' RestoreSecret Text

The ARN or name of the secret to restore.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

restoreSecretResponse_arn :: Lens' RestoreSecretResponse (Maybe Text)

The ARN of the secret that was restored.

restoreSecretResponse_name :: Lens' RestoreSecretResponse (Maybe Text)

The name of the secret that was restored.

restoreSecretResponse_httpStatus :: Lens' RestoreSecretResponse Int

The response's http status code.

RotateSecret

rotateSecret_clientRequestToken :: Lens' RotateSecret (Maybe Text)

A unique identifier for the new version of the secret that helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during rotation. This value becomes the VersionId of the new version.

If you use the Amazon Web Services CLI or one of the Amazon Web Services SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes that in the request for this parameter. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.

You only need to specify this value if you implement your own retry logic and you want to ensure that Secrets Manager doesn't attempt to create a secret version twice. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.

rotateSecret_rotateImmediately :: Lens' RotateSecret (Maybe Bool)

Specifies whether to rotate the secret immediately or wait until the next scheduled rotation window. The rotation schedule is defined in RotateSecretRequest$RotationRules.

If you don't immediately rotate the secret, Secrets Manager tests the rotation configuration by running the testSecret step of the Lambda rotation function. The test creates an AWSPENDING version of the secret and then removes it.

If you don't specify this value, then by default, Secrets Manager rotates the secret immediately.

rotateSecret_rotationLambdaARN :: Lens' RotateSecret (Maybe Text)

The ARN of the Lambda rotation function that can rotate the secret.

rotateSecret_rotationRules :: Lens' RotateSecret (Maybe RotationRulesType)

A structure that defines the rotation configuration for this secret.

rotateSecret_secretId :: Lens' RotateSecret Text

The ARN or name of the secret to rotate.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

rotateSecretResponse_arn :: Lens' RotateSecretResponse (Maybe Text)

The ARN of the secret.

rotateSecretResponse_name :: Lens' RotateSecretResponse (Maybe Text)

The name of the secret.

rotateSecretResponse_versionId :: Lens' RotateSecretResponse (Maybe Text)

The ID of the new version of the secret.

rotateSecretResponse_httpStatus :: Lens' RotateSecretResponse Int

The response's http status code.

StopReplicationToReplica

stopReplicationToReplica_secretId :: Lens' StopReplicationToReplica Text

The ARN of the primary secret.

stopReplicationToReplicaResponse_arn :: Lens' StopReplicationToReplicaResponse (Maybe Text)

The ARN of the promoted secret. The ARN is the same as the original primary secret except the Region is changed.

stopReplicationToReplicaResponse_httpStatus :: Lens' StopReplicationToReplicaResponse Int

The response's http status code.

TagResource

tagResource_secretId :: Lens' TagResource Text

The identifier for the secret to attach tags to. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

tagResource_tags :: Lens' TagResource [Tag]

The tags to attach to the secret as a JSON text string argument. Each element in the list consists of a Key and a Value.

For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For more information, see Specifying parameter values for the Amazon Web Services CLI in the Amazon Web Services CLI User Guide.

UntagResource

untagResource_secretId :: Lens' UntagResource Text

The ARN or name of the secret.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

untagResource_tagKeys :: Lens' UntagResource [Text]

A list of tag key names to remove from the secret. You don't specify the value. Both the key and its associated value are removed.

This parameter requires a JSON text string argument.

For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For more information, see Specifying parameter values for the Amazon Web Services CLI in the Amazon Web Services CLI User Guide.

UpdateSecret

updateSecret_clientRequestToken :: Lens' UpdateSecret (Maybe Text)

If you include SecretString or SecretBinary, then Secrets Manager creates a new version for the secret, and this parameter specifies the unique identifier for the new version.

If you use the Amazon Web Services CLI or one of the Amazon Web Services SDKs to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes it as the value for this parameter in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for the new version and include the value in the request.

This value becomes the VersionId of the new version.

updateSecret_description :: Lens' UpdateSecret (Maybe Text)

The description of the secret.

updateSecret_kmsKeyId :: Lens' UpdateSecret (Maybe Text)

The ARN, key ID, or alias of the KMS key that Secrets Manager uses to encrypt new secret versions as well as any existing versions with the staging labels AWSCURRENT, AWSPENDING, or AWSPREVIOUS. For more information about versions and staging labels, see Concepts: Version.

A key alias is always prefixed by alias/, for example alias/aws/secretsmanager. For more information, see About aliases.

If you set this to an empty string, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result.

You can only use the Amazon Web Services managed key aws/secretsmanager if you call this operation using credentials from the same Amazon Web Services account that owns the secret. If the secret is in a different account, then you must use a customer managed key and provide the ARN of that KMS key in this field. The user making the call must have permissions to both the secret and the KMS key in their respective accounts.

updateSecret_secretBinary :: Lens' UpdateSecret (Maybe ByteString)

The binary data to encrypt and store in the new version of the secret. We recommend that you store your binary data in a file and then pass the contents of the file as a parameter.

Either SecretBinary or SecretString must have a value, but not both.

You can't access this parameter in the Secrets Manager console.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

updateSecret_secretString :: Lens' UpdateSecret (Maybe Text)

The text data to encrypt and store in the new version of the secret. We recommend you use a JSON structure of key/value pairs for your secret value.

Either SecretBinary or SecretString must have a value, but not both.

updateSecret_secretId :: Lens' UpdateSecret Text

The ARN or name of the secret.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

updateSecretResponse_arn :: Lens' UpdateSecretResponse (Maybe Text)

The ARN of the secret that was updated.

updateSecretResponse_name :: Lens' UpdateSecretResponse (Maybe Text)

The name of the secret that was updated.

updateSecretResponse_versionId :: Lens' UpdateSecretResponse (Maybe Text)

If Secrets Manager created a new version of the secret during this operation, then VersionId contains the unique identifier of the new version.

updateSecretResponse_httpStatus :: Lens' UpdateSecretResponse Int

The response's http status code.

UpdateSecretVersionStage

updateSecretVersionStage_moveToVersionId :: Lens' UpdateSecretVersionStage (Maybe Text)

The ID of the version to add the staging label to. To remove a label from a version, then do not specify this parameter.

If the staging label is already attached to a different version of the secret, then you must also specify the RemoveFromVersionId parameter.

updateSecretVersionStage_removeFromVersionId :: Lens' UpdateSecretVersionStage (Maybe Text)

The ID of the version that the staging label is to be removed from. If the staging label you are trying to attach to one version is already attached to a different version, then you must include this parameter and specify the version that the label is to be removed from. If the label is attached and you either do not specify this parameter, or the version ID does not match, then the operation fails.

updateSecretVersionStage_secretId :: Lens' UpdateSecretVersionStage Text

The ARN or the name of the secret with the version and staging labelsto modify.

For an ARN, we recommend that you specify a complete ARN rather than a partial ARN. See Finding a secret from a partial ARN.

updateSecretVersionStage_versionStage :: Lens' UpdateSecretVersionStage Text

The staging label to add to this version.

updateSecretVersionStageResponse_arn :: Lens' UpdateSecretVersionStageResponse (Maybe Text)

The ARN of the secret that was updated.

updateSecretVersionStageResponse_name :: Lens' UpdateSecretVersionStageResponse (Maybe Text)

The name of the secret that was updated.

updateSecretVersionStageResponse_httpStatus :: Lens' UpdateSecretVersionStageResponse Int

The response's http status code.

ValidateResourcePolicy

validateResourcePolicy_secretId :: Lens' ValidateResourcePolicy (Maybe Text)

This field is reserved for internal use.

validateResourcePolicy_resourcePolicy :: Lens' ValidateResourcePolicy Text

A JSON-formatted string that contains an Amazon Web Services resource-based policy. The policy in the string identifies who can access or manage this secret and its versions. For example policies, see Permissions policy examples.

validateResourcePolicyResponse_policyValidationPassed :: Lens' ValidateResourcePolicyResponse (Maybe Bool)

True if your policy passes validation, otherwise false.

validateResourcePolicyResponse_validationErrors :: Lens' ValidateResourcePolicyResponse (Maybe [ValidationErrorsEntry])

Validation errors if your policy didn't pass validation.

validateResourcePolicyResponse_httpStatus :: Lens' ValidateResourcePolicyResponse Int

The response's http status code.

Types

Filter

filter_key :: Lens' Filter (Maybe FilterNameStringType)

The following are keys you can use:

• description: Prefix match, not case-sensitive.
• name: Prefix match, case-sensitive.
• tag-key: Prefix match, case-sensitive.
• tag-value: Prefix match, case-sensitive.
• primary-region: Prefix match, case-sensitive.
• all: Breaks the filter value string into words and then searches all attributes for matches. Not case-sensitive.

filter_values :: Lens' Filter (Maybe (NonEmpty Text))

The keyword to filter for.

You can prefix your search value with an exclamation mark (!) in order to perform negation filters.

ReplicaRegionType

replicaRegionType_kmsKeyId :: Lens' ReplicaRegionType (Maybe Text)

The ARN, key ID, or alias of the KMS key to encrypt the secret. If you don't include this field, Secrets Manager uses aws/secretsmanager.

replicaRegionType_region :: Lens' ReplicaRegionType (Maybe Text)

A Region code. For a list of Region codes, see Name and code of Regions.

ReplicationStatusType

replicationStatusType_kmsKeyId :: Lens' ReplicationStatusType (Maybe Text)

Can be an ARN, Key ID, or Alias.

replicationStatusType_lastAccessedDate :: Lens' ReplicationStatusType (Maybe UTCTime)

The date that the secret was last accessed in the Region. This field is omitted if the secret has never been retrieved in the Region.

replicationStatusType_region :: Lens' ReplicationStatusType (Maybe Text)

The Region where replication occurs.

replicationStatusType_status :: Lens' ReplicationStatusType (Maybe StatusType)

The status can be InProgress, Failed, or InSync.

replicationStatusType_statusMessage :: Lens' ReplicationStatusType (Maybe Text)

Status message such as "/Secret with this name already exists in this region/".

RotationRulesType

rotationRulesType_automaticallyAfterDays :: Lens' RotationRulesType (Maybe Natural)

The number of days between automatic scheduled rotations of the secret. You can use this value to check that your secret meets your compliance guidelines for how often secrets must be rotated.

In DescribeSecret and ListSecrets, this value is calculated from the rotation schedule after every successful rotation. In RotateSecret, you can set the rotation schedule in RotationRules with AutomaticallyAfterDays or ScheduleExpression, but not both. To set a rotation schedule in hours, use ScheduleExpression.

rotationRulesType_duration :: Lens' RotationRulesType (Maybe Text)

The length of the rotation window in hours, for example 3h for a three hour window. Secrets Manager rotates your secret at any time during this window. The window must not extend into the next rotation window or the next UTC day. The window starts according to the ScheduleExpression. If you don't specify a Duration, for a ScheduleExpression in hours, the window automatically closes after one hour. For a ScheduleExpression in days, the window automatically closes at the end of the UTC day. For more information, including examples, see Schedule expressions in Secrets Manager rotation in the Secrets Manager Users Guide.

rotationRulesType_scheduleExpression :: Lens' RotationRulesType (Maybe Text)

A cron() or rate() expression that defines the schedule for rotating your secret. Secrets Manager rotation schedules use UTC time zone. Secrets Manager rotates your secret any time during a rotation window.

Secrets Manager rate() expressions represent the interval in hours or days that you want to rotate your secret, for example rate(12 hours) or rate(10 days). You can rotate a secret as often as every four hours. If you use a rate() expression, the rotation window starts at midnight. For a rate in hours, the default rotation window closes after one hour. For a rate in days, the default rotation window closes at the end of the day. You can set the Duration to change the rotation window. The rotation window must not extend into the next UTC day or into the next rotation window.

You can use a cron() expression to create a rotation schedule that is more detailed than a rotation interval. For more information, including examples, see Schedule expressions in Secrets Manager rotation in the Secrets Manager Users Guide. For a cron expression that represents a schedule in hours, the default rotation window closes after one hour. For a cron expression that represents a schedule in days, the default rotation window closes at the end of the day. You can set the Duration to change the rotation window. The rotation window must not extend into the next UTC day or into the next rotation window.

SecretListEntry

secretListEntry_arn :: Lens' SecretListEntry (Maybe Text)

The Amazon Resource Name (ARN) of the secret.

secretListEntry_createdDate :: Lens' SecretListEntry (Maybe UTCTime)

The date and time when a secret was created.

secretListEntry_deletedDate :: Lens' SecretListEntry (Maybe UTCTime)

The date and time the deletion of the secret occurred. Not present on active secrets. The secret can be recovered until the number of days in the recovery window has passed, as specified in the RecoveryWindowInDays parameter of the DeleteSecret operation.

secretListEntry_description :: Lens' SecretListEntry (Maybe Text)

The user-provided description of the secret.

secretListEntry_kmsKeyId :: Lens' SecretListEntry (Maybe Text)

The ARN of the KMS key that Secrets Manager uses to encrypt the secret value. If the secret is encrypted with the Amazon Web Services managed key aws/secretsmanager, this field is omitted.

secretListEntry_lastAccessedDate :: Lens' SecretListEntry (Maybe UTCTime)

The date that the secret was last accessed in the Region. This field is omitted if the secret has never been retrieved in the Region.

secretListEntry_lastChangedDate :: Lens' SecretListEntry (Maybe UTCTime)

The last date and time that this secret was modified in any way.

secretListEntry_lastRotatedDate :: Lens' SecretListEntry (Maybe UTCTime)

The most recent date and time that the Secrets Manager rotation process was successfully completed. This value is null if the secret hasn't ever rotated.

secretListEntry_name :: Lens' SecretListEntry (Maybe Text)

The friendly name of the secret. You can use forward slashes in the name to represent a path hierarchy. For example, /prod/databases/dbserver1 could represent the secret for a server named dbserver1 in the folder databases in the folder prod.

secretListEntry_nextRotationDate :: Lens' SecretListEntry (Maybe UTCTime)

Undocumented member.

secretListEntry_owningService :: Lens' SecretListEntry (Maybe Text)

Returns the name of the service that created the secret.

secretListEntry_primaryRegion :: Lens' SecretListEntry (Maybe Text)

The Region where Secrets Manager originated the secret.

secretListEntry_rotationEnabled :: Lens' SecretListEntry (Maybe Bool)

Indicates whether automatic, scheduled rotation is enabled for this secret.

secretListEntry_rotationLambdaARN :: Lens' SecretListEntry (Maybe Text)

The ARN of an Amazon Web Services Lambda function invoked by Secrets Manager to rotate and expire the secret either automatically per the schedule or manually by a call to RotateSecret .

secretListEntry_rotationRules :: Lens' SecretListEntry (Maybe RotationRulesType)

A structure that defines the rotation configuration for the secret.

secretListEntry_secretVersionsToStages :: Lens' SecretListEntry (Maybe (HashMap Text (NonEmpty Text)))

A list of all of the currently assigned SecretVersionStage staging labels and the SecretVersionId attached to each one. Staging labels are used to keep track of the different versions during the rotation process.

A version that does not have any SecretVersionStage is considered deprecated and subject to deletion. Such versions are not included in this list.

secretListEntry_tags :: Lens' SecretListEntry (Maybe [Tag])

The list of user-defined tags associated with the secret. To add tags to a secret, use TagResource . To remove tags, use UntagResource .

SecretVersionsListEntry

secretVersionsListEntry_createdDate :: Lens' SecretVersionsListEntry (Maybe UTCTime)

The date and time this version of the secret was created.

secretVersionsListEntry_kmsKeyIds :: Lens' SecretVersionsListEntry (Maybe [Text])

The KMS keys used to encrypt the secret version.

secretVersionsListEntry_lastAccessedDate :: Lens' SecretVersionsListEntry (Maybe UTCTime)

The date that this version of the secret was last accessed. Note that the resolution of this field is at the date level and does not include the time.

secretVersionsListEntry_versionId :: Lens' SecretVersionsListEntry (Maybe Text)

The unique version identifier of this version of the secret.

secretVersionsListEntry_versionStages :: Lens' SecretVersionsListEntry (Maybe (NonEmpty Text))

An array of staging labels that are currently associated with this version of the secret.

Tag

tag_key :: Lens' Tag (Maybe Text)

The key identifier, or name, of the tag.

tag_value :: Lens' Tag (Maybe Text)

The string value associated with the key of the tag.

ValidationErrorsEntry

validationErrorsEntry_checkName :: Lens' ValidationErrorsEntry (Maybe Text)

Checks the name of the policy.

validationErrorsEntry_errorMessage :: Lens' ValidationErrorsEntry (Maybe Text)

Displays error messages if validation encounters problems during validation of the resource policy.