{-# LANGUAGE Rank2Types, DeriveGeneric #-}

-- | Pileup, similar to Samtools
--
-- Pileup turns a sorted sequence of reads into a sequence of \"piles\",
-- one for each site where a genetic variant might be called.  We will
-- scan each read's CIGAR line and MD field in concert with the sequence
-- and effective quality.  Effective quality is the lowest available
-- quality score of QUAL, MAPQ, and BQ.  For aDNA calling, a base is
-- represented as four probabilities, derived from a position dependent
-- damage model.

module Bio.Bam.Pileup where

import Bio.Bam.Header
import Bio.Bam.Rec
import Bio.Iteratee
import Bio.Prelude

import qualified Data.ByteString        as B
import qualified Data.Vector.Generic    as V
import qualified Data.Vector.Unboxed    as U

-- | The primitive pieces for genotype calling:  A position, a base
-- represented as four likelihoods, an inserted sequence, and the
-- length of a deleted sequence.  The logic is that we look at a base
-- followed by some indel, and all those indels are combined into a
-- single insertion and a single deletion.
data PrimChunks = Seek {-# UNPACK #-} !Int PrimBase                   -- ^ skip to position (at start or after N operation)
                | Indel [Nucleotides] [DamagedBase] PrimBase          -- ^ observed deletion and insertion between two bases
                | EndOfRead                                           -- ^ nothing anymore
  deriving Show

data PrimBase = Base { _pb_wait   :: {-# UNPACK #-} !Int              -- ^ number of bases to wait due to a deletion
                     , _pb_base   :: {-# UNPACK #-} !DamagedBase
                     , _pb_mapq   :: {-# UNPACK #-} !Qual             -- ^ map quality
                     , _pb_chunks ::                 PrimChunks }     -- ^ more chunks
  deriving Show

type PosPrimChunks = (Refseq, Int, Bool, PrimChunks)

-- | Represents our knowledge about a certain base, which consists of
-- the base itself (A,C,G,T, encoded as 0..3; no Ns), the quality score
-- (anything that isn't A,C,G,T becomes A with quality 0), and a
-- substitution matrix representing post-mortem but pre-sequencing
-- substitutions.
--
-- Unfortunately, none of this can be rolled into something more simple,
-- because damage and sequencing error behave so differently.
--
-- Damage information is polymorphic.  We might run with a simple
-- version (a matrix) for calling, but we need more (a matrix and a
-- mutable matrix, I think) for estimation.

data DamagedBase = DB { db_call    :: {-# UNPACK #-} !Nucleotide           -- ^ called base
                      , db_qual    :: {-# UNPACK #-} !Qual                 -- ^ quality of called base
                      , db_dmg_tk  :: {-# UNPACK #-} !DmgToken             -- ^ damage information
                      , db_dmg_pos :: {-# UNPACK #-} !Int                  -- ^ damage information
                      , db_ref     :: {-# UNPACK #-} !Nucleotides }        -- ^ reference base from MD field

newtype DmgToken = DmgToken { fromDmgToken :: Int }

instance Show DamagedBase where
    showsPrec _ (DB n q _ _ r)
        | nucToNucs n == r = shows n .                     (:) '@' . shows q
        | otherwise        = shows n . (:) '/' . shows r . (:) '@' . shows q


-- | Decomposes a BAM record into chunks suitable for piling up.  We
-- pick apart the CIGAR and MD fields, and combine them with sequence
-- and quality as appropriate.  Clipped bases are removed/skipped as
-- needed.  We also apply a substitution matrix to each base, which must
-- be supplied along with the read.
{-# INLINE decompose #-}
decompose :: DmgToken -> BamRaw -> [PosPrimChunks]
decompose dtok br =
    if isUnmapped b || isDuplicate b || not (isValidRefseq b_rname)
    then [] else [(b_rname, b_pos, isReversed b, pchunks)]
  where
    b@BamRec{..} = unpackBam br
    pchunks = firstBase b_pos 0 0 (fromMaybe [] $ getMd b)

    !max_cig = V.length b_cigar
    !max_seq = V.length b_seq
    !baq     = extAsString "BQ" b

    -- This will compute the effective quality.  As far as I can see
    -- from the BAM spec V1.4, the qualities that matter are QUAL, MAPQ,
    -- and BAQ.  If QUAL is invalid, we replace it (arbitrarily) with
    -- 23 (assuming a rather conservative error rate of ~0.5%), BAQ is
    -- added to QUAL, and MAPQ is an upper limit for effective quality.

    get_seq :: Int -> (Nucleotides -> Nucleotides) -> DamagedBase
    get_seq i f = case b_seq `V.unsafeIndex` i of                                -- nucleotide
            n | n == nucsA -> DB nucA qe dtok dmg (f n)
              | n == nucsC -> DB nucC qe dtok dmg (f n)
              | n == nucsG -> DB nucG qe dtok dmg (f n)
              | n == nucsT -> DB nucT qe dtok dmg (f n)
              | otherwise  -> DB nucA (Q 0) dtok dmg (f n)
      where
        !q   = case b_qual `V.unsafeIndex` i of Q 0xff -> Q 30 ; x -> x         -- quality; invalid (0xff) becomes 30
        !q'  | i >= B.length baq = q                                            -- no BAQ available
             | otherwise = Q (unQ q + (B.index baq i - 64))                     -- else correct for BAQ
        !qe  = min q' b_mapq                                                    -- use MAPQ as upper limit
        !dmg = if i+i > max_seq then i-max_seq else i

    -- Look for first base following the read's start or a gap (CIGAR
    -- code N).  Indels are skipped, since these are either bugs in the
    -- aligner or the aligner getting rid of essentially unalignable
    -- bases.
    firstBase :: Int -> Int -> Int -> [MdOp] -> PrimChunks
    firstBase !pos !is !ic mds
        | is >= max_seq || ic >= max_cig = EndOfRead
        | otherwise = case b_cigar `V.unsafeIndex` ic of
            Ins :* cl ->            firstBase  pos (cl+is) (ic+1) mds
            SMa :* cl ->            firstBase  pos (cl+is) (ic+1) mds
            Del :* cl ->            firstBase (pos+cl) is  (ic+1) (drop_del cl mds)
            Nop :* cl ->            firstBase (pos+cl) is  (ic+1) mds
            HMa :*  _ ->            firstBase  pos     is  (ic+1) mds
            Pad :*  _ ->            firstBase  pos     is  (ic+1) mds
            Mat :*  0 ->            firstBase  pos     is  (ic+1) mds
            Mat :*  _ -> Seek pos $ nextBase 0 pos     is   ic 0  mds
      where
        -- We have to treat (MdNum 0), because samtools actually
        -- generates(!) it all over the place and if not handled as a
        -- special case, it looks like an inconsistent MD field.
        drop_del n (MdDel ns : mds')
            | n < length ns = MdDel (drop n ns) : mds'
            | n > length ns = drop_del (n - length ns) mds'
            | otherwise     = mds'
        drop_del n (MdNum 0 : mds') = drop_del n mds'
        drop_del _ mds'     = mds'

    -- Generate likelihoods for the next base.  When this gets called,
    -- we are looking at an M CIGAR operation and all the subindices are
    -- valid.
    -- I don't think we can ever get (MdDel []), but then again, who
    -- knows what crazy shit samtools decides to generate.  There is
    -- little harm in special-casing it.
    nextBase :: Int -> Int -> Int -> Int -> Int -> [MdOp] -> PrimBase
    nextBase !wt !pos !is !ic !io mds = case mds of
        MdNum   0 : mds' -> nextBase wt pos is ic io mds'
        MdDel  [] : mds' -> nextBase wt pos is ic io mds'
        MdNum   1 : mds' -> nextBase' (get_seq is id   ) mds'
        MdNum   n : mds' -> nextBase' (get_seq is id   ) (MdNum (n-1) : mds')
        MdRep ref : mds' -> nextBase' (get_seq is $ const ref  ) mds'
        MdDel   _ : _    -> nextBase' (get_seq is $ const nucsN) mds
        [              ] -> nextBase' (get_seq is $ const nucsN) [ ]
      where
        nextBase' ref mds' = Base wt ref b_mapq $ nextIndel  [] [] (pos+1) (is+1) ic (io+1) mds'

    -- Look for the next indel after a base.  We collect all indels (I
    -- and D codes) into one combined operation.  If we hit N or the
    -- read's end, we drop all of it (indels next to a gap indicate
    -- trouble).  Other stuff is skipped: we could check for stuff that
    -- isn't valid in the middle of a read (H and S), but then what
    -- would we do about it anyway?  Just ignoring it is much easier and
    -- arguably at least as correct.
    nextIndel :: [[DamagedBase]] -> [Nucleotides] -> Int -> Int -> Int -> Int -> [MdOp] -> PrimChunks
    nextIndel ins del !pos !is !ic !io mds
        | is >= max_seq || ic >= max_cig = EndOfRead
        | otherwise = case b_cigar `V.unsafeIndex` ic of
            Ins :* cl ->             nextIndel (isq cl) del   pos (cl+is) (ic+1) 0 mds
            SMa :* cl ->             nextIndel  ins     del   pos (cl+is) (ic+1) 0 mds
            Del :* cl ->             nextIndel ins (del++dsq) (pos+cl) is (ic+1) 0 mds'
                where (dsq,mds') = split_del cl mds
            Pad :*  _ ->             nextIndel  ins     del   pos     is  (ic+1) 0 mds
            HMa :*  _ ->             nextIndel  ins     del   pos     is  (ic+1) 0 mds
            Nop :* cl ->             firstBase               (pos+cl) is  (ic+1)   mds      -- ends up generating a 'Seek'
            Mat :* cl | io == cl  -> nextIndel  ins     del   pos     is  (ic+1) 0 mds
                      | otherwise -> indel del out $ nextBase (length del) pos is ic io mds -- ends up generating a 'Base'
      where
        indel d o k = foldr seq (Indel d o k) o
        out    = concat $ reverse ins
        isq cl = [ get_seq i $ const gap | i <- [is..is+cl-1] ] : ins

        -- We have to treat (MdNum 0), because samtools actually
        -- generates(!) it all over the place and if not handled as a
        -- special case, it looks like an incinsistend MD field.
        split_del n (MdDel ns : mds')
            | n < length ns = (take n ns, MdDel (drop n ns) : mds')
            | n > length ns = let (ns', mds'') = split_del (n - length ns) mds' in (ns++ns', mds'')
            | otherwise     = (ns, mds')
        split_del n (MdNum 0 : mds') = split_del n mds'
        split_del n mds'    = (replicate n nucsN, mds')

-- | Statistics about a genotype call.  Probably only useful for
-- fitlering (so not very useful), but we keep them because it's easy to
-- track them.

data CallStats = CallStats
    { read_depth       :: {-# UNPACK #-} !Int       -- number of contributing reads
    , reads_mapq0      :: {-# UNPACK #-} !Int       -- number of (non-)contributing reads with MAPQ==0
    , sum_mapq         :: {-# UNPACK #-} !Int       -- sum of map qualities of contributing reads
    , sum_mapq_squared :: {-# UNPACK #-} !Int }     -- sum of squared map qualities of contributing reads
  deriving (Show, Eq, Generic)

instance Monoid CallStats where
    mempty      = CallStats { read_depth       = 0
                            , reads_mapq0      = 0
                            , sum_mapq         = 0
                            , sum_mapq_squared = 0 }
    mappend x y = CallStats { read_depth       = read_depth x + read_depth y
                            , reads_mapq0      = reads_mapq0 x + reads_mapq0 y
                            , sum_mapq         = sum_mapq x + sum_mapq y
                            , sum_mapq_squared = sum_mapq_squared x + sum_mapq_squared y }

newtype V_Nuc  = V_Nuc  (U.Vector Nucleotide)  deriving (Eq, Ord, Show)
newtype V_Nucs = V_Nucs (U.Vector Nucleotides) deriving (Eq, Ord, Show)

data IndelVariant = IndelVariant { deleted_bases  :: !V_Nucs, inserted_bases :: !V_Nuc }
      deriving (Eq, Ord, Show, Generic)


-- | Map quality and a list of encountered bases, with damage
-- information and reference base if known.
type BasePile  =                          [DamagedBase]

-- | Map quality and a list of encountered indel variants.  The deletion
-- has the reference sequence, if known, an insertion has the inserted
-- sequence with damage information.
type IndelPile = [( Qual, ([Nucleotides], [DamagedBase]) )]   -- a list of indel variants

-- | Running pileup results in a series of piles.  A 'Pile' has the
-- basic statistics of a 'VarCall', but no likelihood values and a
-- pristine list of variants instead of a proper call.  We emit one pile
-- with two 'BasePile's (one for each strand) and one 'IndelPile' (the
-- one immediately following) at a time.

data Pile' a b = Pile { p_refseq     :: {-# UNPACK #-} !Refseq
                      , p_pos        :: {-# UNPACK #-} !Int
                      , p_snp_stat   :: {-# UNPACK #-} !CallStats
                      , p_snp_pile   :: a
                      , p_indel_stat :: {-# UNPACK #-} !CallStats
                      , p_indel_pile :: b }
  deriving Show

-- | Raw pile.  Bases and indels are piled separately on forward and
-- backward strands.
type Pile = Pile' (BasePile, BasePile) (IndelPile, IndelPile)

-- | The pileup enumeratee takes 'BamRaw's, decomposes them, interleaves
-- the pieces appropriately, and generates 'Pile's.  The output will
-- contain at most one 'BasePile' and one 'IndelPile' for each position,
-- piles are sorted by position.
--
-- This top level driver receives 'BamRaw's.  Unaligned reads and
-- duplicates are skipped (but not those merely failing quality checks).
-- Processing stops when the first read with invalid 'br_rname' is
-- encountered or a t end of file.

{-# INLINE pileup #-}
pileup :: Enumeratee [PosPrimChunks] [Pile] IO b
pileup = eneeCheckIfDonePass (icont . runPileM pileup' finish (Refseq 0) 0 ([],[]) (Empty,Empty))
  where
    finish () _r _p ([],[]) (Empty,Empty) out inp = idone (liftI out) inp
    finish () _ _ _ _ _ _ = error "logic error: leftovers after pileup"


-- | The pileup logic keeps a current coordinate (just two integers) and
-- two running queues: one of /active/ 'PrimBase's that contribute to
-- current genotype calling and on of /waiting/ 'PrimBase's that will
-- contribute at a later point.
--
-- Oppan continuation passing style!  Not only is the CPS version of the
-- state monad (we have five distinct pieces of state) somewhat faster,
-- we also need CPS to interact with the mechanisms of 'Iteratee'.  It
-- makes implementing 'yield', 'peek', and 'bump' straight forward.

newtype PileM m a = PileM { runPileM :: forall r . (a -> PileF m r) -> PileF m r }

-- | The things we drag along in 'PileM'.  Notes:
-- * The /active/ queue is a simple stack.  We add at the front when we
--   encounter reads, which reverses them.  When traversing it, we traverse
--   reads backwards, but since we accumulate the 'BasePile', it gets reversed
--   back.  The new /active/ queue, however, is no longer reversed (as it should
--   be).  So after the traversal, we reverse it again.  (Yes, it is harder to
--   understand than using a proper deque type, but it is cheaper.
--   There may not be much point in the reversing, though.)

type PileF m r = Refseq -> Int ->                             -- current position
                 ( [PrimBase], [PrimBase] ) ->                -- active queues
                 ( Heap, Heap ) ->                            -- waiting queues
                 (Stream [Pile] -> Iteratee [Pile] m r) ->    -- output function
                 Stream [PosPrimChunks] ->                    -- pending input
                 Iteratee [PosPrimChunks] m (Iteratee [Pile] m r)

instance Functor (PileM m) where
    {-# INLINE fmap #-}
    fmap f (PileM m) = PileM $ \k -> m (k . f)

instance Applicative (PileM m) where
    {-# INLINE pure #-}
    pure a = PileM $ \k -> k a
    {-# INLINE (<*>) #-}
    u <*> v = PileM $ \k -> runPileM u (\a -> runPileM v (k . a))

instance Monad (PileM m) where
    {-# INLINE return #-}
    return a = PileM $ \k -> k a
    {-# INLINE (>>=) #-}
    m >>=  k = PileM $ \k' -> runPileM m (\a -> runPileM (k a) k')

{-# INLINE get_refseq #-}
get_refseq :: PileM m Refseq
get_refseq = PileM $ \k r -> k r r

{-# INLINE get_pos #-}
get_pos :: PileM m Int
get_pos = PileM $ \k r p -> k p r p

{-# INLINE upd_pos #-}
upd_pos :: (Int -> Int) -> PileM m ()
upd_pos f = PileM $ \k r p -> k () r $! f p

-- | Sends one piece of output downstream.  You are not expected to
-- understand how this works, but inlining 'eneeCheckIfDone' plugged an
-- annoying memory leak.
{-# INLINE yieldPile #-}
yieldPile :: CallStats -> BasePile -> BasePile -> CallStats -> IndelPile -> IndelPile -> PileM m ()
yieldPile x1 x2a x2b x3 x4a x4b = PileM $ \ !kont !r !p !a !w !out !inp -> Iteratee $ \od oc ->
      let recurse           = kont () r p a w
          onDone y s        = od (idone y s) inp
          onCont k Nothing  = runIter (recurse k inp) od oc
          onCont k (Just e) = runIter (throwRecoverableErr e (recurse k . (<>) inp)) od oc
          pile              = Pile r p x1 (x2a,x2b) x3 (x4a,x4b)
      in runIter (out (Chunk [pile])) onDone onCont

-- | The actual pileup algorithm.  If /active/ contains something,
-- continue here.  Else find the coordinate to continue from, which is
-- the minimum of the next /waiting/ coordinate and the next coordinate
-- in input; if found, continue there, else we're all done.
pileup' :: PileM m ()
pileup' = PileM $ \ !k !refseq !pos !active !waiting !out !inp ->

    let recurse     = runPileM pileup'  k refseq pos active waiting out
        cont2 rs po = runPileM pileup'' k     rs po  active waiting out inp
        leave       =                k () refseq pos active waiting out inp

    in case (active, getMinKeysH waiting, inp) of
        ( (_:_,_),       _,                  _  ) -> cont2 refseq pos
        ( (_,_:_),       _,                  _  ) -> cont2 refseq pos
        (    _,    Just nw, EOF              _  ) -> cont2 refseq nw
        (    _,    Nothing, EOF              _  ) -> leave
        (    _,          _, Chunk [           ] ) -> liftI recurse
        (    _,    Nothing, Chunk ((r,p,_,_):_) ) -> cont2 r p
        (    _,    Just nw, Chunk ((r,p,_,_):_) )
                           | (refseq,nw) <= (r,p) -> cont2 refseq nw
                           | otherwise            -> cont2 r p
  where
    getMinKeysH :: (Heap, Heap) -> Maybe Int
    getMinKeysH (a,b) = case (getMinKeyH a, getMinKeyH b) of
        ( Nothing, Nothing ) -> Nothing
        ( Just  x, Nothing ) -> Just  x
        ( Nothing, Just  y ) -> Just  y
        ( Just  x, Just  y ) -> Just (min x y)


pileup'' :: PileM m ()
pileup'' = do
    -- Input is still 'BamRaw', since these can be relied on to be
    -- sorted.  First see if there is any input at the current location,
    -- if so, decompose it and add it to the appropriate queue.
    p'feed_input
    p'check_waiting
    ((fin_bsL, fin_bpL), (fin_bsR, fin_bpR), (fin_isL, fin_ipL), (fin_isR, fin_ipR)) <- p'scan_active

    -- Output, but don't bother emitting empty piles.  Note that a plain
    -- basecall still yields an entry in the 'IndelPile'.  This is necessary,
    -- because actual indel calling will want to know how many reads /did not/
    -- show the variant.  However, if no reads show any variant, and here is the
    -- first place where we notice that, the pile is useless.
    let uninteresting (_,(d,i)) = null d && null i
    unless (null fin_bpL && null fin_bpR && all uninteresting fin_ipL && all uninteresting fin_ipR) $
        yieldPile (fin_bsL <> fin_bsR) fin_bpL fin_bpR
                  (fin_isL <> fin_isR) fin_ipL fin_ipR

    -- Bump coordinate and loop.  (Note that the bump to the next
    -- reference /sequence/ is done implicitly, because we will run out of
    -- reads and restart in 'pileup''.)
    upd_pos succ
    pileup'

-- | Feeds input as long as it starts at the current position
p'feed_input :: PileM m ()
p'feed_input = PileM $ \kont rs po ac@(af,ar) wt@(wf,wr) out inp -> case inp of
        Chunk [   ] -> liftI $ runPileM p'feed_input kont rs po ac wt out
        Chunk ((rs', po', str, prim):bs)
            | rs == rs' && po == po' ->
                case prim of
                    Seek   !p !pb -> let wf' = Node p pb Empty Empty `unionH` wf
                                         wr' = Node p pb Empty Empty `unionH` wr
                                     in runPileM p'feed_input kont rs po ac (if str then (wf,wr') else (wf',wr))     out (Chunk bs)

                    Indel _ _ !pb ->    runPileM p'feed_input kont rs po (if str then (af,pb:ar) else (pb:af,ar)) wt out (Chunk bs)

                    EndOfRead     ->    runPileM p'feed_input kont rs po ac wt                                       out (Chunk bs)

        _           -> kont () rs po ac wt out inp

-- | Checks /waiting/ queue.  If there is anything waiting for the
-- current position, moves it to /active/ queue.
p'check_waiting :: PileM m ()
p'check_waiting = PileM $ \kont rs po (af0,ar0) (wf0,wr0) ->
        let go1 af wf = case viewMinH wf of
                Just (!mk, !pb, !wf') | mk == po -> go1 (pb:af) wf'
                _                                -> go2 af wf ar0 wr0

            go2 af wf ar wr = case viewMinH wr of
                Just (!mk, !pb, !wr') | mk == po -> go2 af wf (pb:ar) wr'
                _                                -> kont () rs po (af,ar) (wf,wr)

        in go1 af0 wf0


-- | Separately scans the two /active/ queues and makes one 'BasePile'
-- from each.  Also sees what's next in the 'PrimChunks':  'Indel's
-- contribute to two separate 'IndelPile's, 'Seek's are pushed back to
-- the /waiting/ queue, 'EndOfRead's are removed, and everything else is
-- added to two fresh /active/ queues.
p'scan_active :: PileM m (( CallStats, BasePile ),  ( CallStats, BasePile ),
                          ( CallStats, IndelPile ), ( CallStats, IndelPile ))
p'scan_active = do
    (bpf,ipf) <- PileM $ \kont rs pos (af,ar) (wf,wr) -> go (\r af' wf' -> kont r rs pos (af',ar) (wf',wr)) [] wf mempty mempty af
    (bpr,ipr) <- PileM $ \kont rs pos (af,ar) (wf,wr) -> go (\r ar' wr' -> kont r rs pos (af,ar') (wf,wr')) [] wr mempty mempty ar
    return (bpf,bpr,ipf,ipr)
  where
    go k !ac !wt !bpile !ipile [                           ] = k (bpile, ipile) (reverse ac) wt
    go k !ac !wt !bpile !ipile (Base nwt qs mq pchunks : bs) =
        case pchunks of
            _ | nwt > 0     -> b' `seq` go k  (b':ac)   wt     bpile     ipile  bs
            Seek p' pb'     -> go k      ac (ins p' pb' wt) (z bpile)    ipile  bs
            Indel nd ni pb' -> go k (pb':ac)            wt  (z bpile) (y ipile) bs where y = put (,) mq (nd,ni)
            EndOfRead       -> go k      ac             wt  (z bpile)    ipile  bs
        where
            b' = Base (nwt-1) qs mq pchunks
            z  = put (\q x -> x { db_qual = min q (db_qual x) }) mq qs

    ins q v w = Node q v Empty Empty `unionH` w

    put f (Q !q) !x (!st,!vs) = ( st { read_depth       = read_depth st + 1
                                     , reads_mapq0      = reads_mapq0 st + (if q == 0 then 1 else 0)
                                     , sum_mapq         = sum_mapq st + fromIntegral q
                                     , sum_mapq_squared = sum_mapq_squared st + fromIntegral q * fromIntegral q }
                                , f (Q q) x : vs )


-- | We need a simple priority queue.  Here's a skew heap (specialized
-- to strict 'Int' priorities and 'PrimBase' values).
data Heap = Empty | Node {-# UNPACK #-} !Int PrimBase Heap Heap

unionH :: Heap -> Heap -> Heap
Empty                 `unionH` t2                    = t2
t1                    `unionH` Empty                 = t1
t1@(Node k1 x1 l1 r1) `unionH` t2@(Node k2 x2 l2 r2)
   | k1 <= k2                                        = Node k1 x1 (t2 `unionH` r1) l1
   | otherwise                                       = Node k2 x2 (t1 `unionH` r2) l2

getMinKeyH :: Heap -> Maybe Int
getMinKeyH Empty          = Nothing
getMinKeyH (Node x _ _ _) = Just x

viewMinH :: Heap -> Maybe (Int, PrimBase, Heap)
viewMinH Empty          = Nothing
viewMinH (Node k v l r) = Just (k, v, l `unionH` r)