-- Hoogle documentation, generated by Haddock
-- See Hoogle, http://www.haskell.org/hoogle/


-- | Haskell binding to libcurl
--   
--   libcurl is a client-side URL transfer library, supporting FTP, FTPS,
--   HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS and FILE.
--   libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading,
--   HTTP form based upload, proxies, cookies, user+password authentication
--   (Basic, Digest, NTLM, Negotiate, Kerberos4), file transfer resume,
--   http proxy tunneling and more!
--   
--   This package provides a Haskell binding to libcurl.
@package curl
@version 1.3


module Network.Curl.Debug
debug :: String -> IO ()

module Network.Curl.Code
data CurlCode
CurlOK :: CurlCode
CurlUnspportedProtocol :: CurlCode
CurlFailedInit :: CurlCode
CurlUrlMalformat :: CurlCode
CurlUrlMalformatUser :: CurlCode
CurlCouldntResolveProxy :: CurlCode
CurlCouldntResolveHost :: CurlCode
CurlCouldntConnect :: CurlCode
CurlFtpWeirdServerReply :: CurlCode
CurlFtpAccessDenied :: CurlCode
CurlFtpUserPasswordIncorrect :: CurlCode
CurlFtpWeirdPassReply :: CurlCode
CurlFtpWeirdUserReply :: CurlCode
CurlFtpWeirdPASVReply :: CurlCode
CurlFtpWeird227Format :: CurlCode
CurlFtpCantGetHost :: CurlCode
CurlFtpCantReconnect :: CurlCode
CurlFtpCouldnSetBinary :: CurlCode
CurlPartialFile :: CurlCode
CurlFtpCouldntRetrFile :: CurlCode
CurlFtpWriteError :: CurlCode
CurlFtpQuoteError :: CurlCode
CurlHttpReturnedError :: CurlCode
CurlWriteError :: CurlCode
CurlMalformatError :: CurlCode
CurlFtpCouldnStorFile :: CurlCode
CurlReadError :: CurlCode
CurlOutOfMemory :: CurlCode
CurlOperationTimeout :: CurlCode
CurlFtpCouldntSetAscii :: CurlCode
CurlFtpPortFailed :: CurlCode
CurlFtpCouldntUseRest :: CurlCode
CurlFtpCouldntGetSize :: CurlCode
CurlHttpRangeError :: CurlCode
CurlHttpPostError :: CurlCode
CurlSSLConnectError :: CurlCode
CurlBadDownloadResume :: CurlCode
CurlFileCouldntReadFile :: CurlCode
CurlLDAPCannotBind :: CurlCode
CurlLDPAPSearchFailed :: CurlCode
CurlLibraryNotFound :: CurlCode
CurlFunctionNotFound :: CurlCode
CurlAbortedByCallback :: CurlCode
CurlBadFunctionArgument :: CurlCode
CurlBadCallingOrder :: CurlCode
CurlInterfaceFailed :: CurlCode
CurlBadPasswordEntered :: CurlCode
CurlTooManyRedirects :: CurlCode
CurlUnknownTelnetOption :: CurlCode
CurlTelnetOptionSyntax :: CurlCode
CurlObsolete :: CurlCode
CurlSSLPeerCertificate :: CurlCode
CurlGotNothing :: CurlCode
CurlSSLEngineNotFound :: CurlCode
CurlSSLEngineSetFailed :: CurlCode
CurlSendError :: CurlCode
CurlRecvError :: CurlCode
CurlShareInUse :: CurlCode
CurlSSLCertProblem :: CurlCode
CurlSSLCipher :: CurlCode
CurlSSLCACert :: CurlCode
CurlBadContentEncoding :: CurlCode
CurlLDAPInvalidUrl :: CurlCode
CurlFilesizeExceeded :: CurlCode
CurlFtpSSLFailed :: CurlCode
CurlSendFailRewind :: CurlCode
CurlSSLEngineInitFailed :: CurlCode
CurlLoginDenied :: CurlCode
CurlTFtpNotFound :: CurlCode
CurlTFtpPerm :: CurlCode
CurlTFtpDiskFull :: CurlCode
CurlTFtpIllegal :: CurlCode
CurlTFtpUnknownId :: CurlCode
CurlTFtpExists :: CurlCode
CurlTFtpNoSuchUser :: CurlCode
CurlConvFailed :: CurlCode
CurlConvReqd :: CurlCode
CurlSSLCACertBadFile :: CurlCode
CurlRemoveFileNotFound :: CurlCode
CurlSSH :: CurlCode
CurlSSLShutdownFailed :: CurlCode
toCode :: CInt -> CurlCode
instance Eq CurlCode
instance Show CurlCode
instance Enum CurlCode

module Network.Curl.Types
type CurlH = Ptr Curl_
type URLString = String
type Port = Long
type Long = Word32
type LLong = Word64
data Slist_
data Curl

-- | Execute a <a>primitve</a> curl operation. NOTE: See warnings about the
--   use of <tt>withForeginPtr</tt>.
curlPrim :: Curl -> (IORef OptionMap -> CurlH -> IO a) -> IO a

-- | Allocates a Haskell handle from a C handle.
mkCurl :: CurlH -> IO Curl

-- | Allocates a Haskell handle from a C handle.
mkCurlWithCleanup :: CurlH -> OptionMap -> IO Curl
type OptionMap = IntMap (IO ())
shareCleanup :: IORef OptionMap -> IO OptionMap
runCleanup :: IORef OptionMap -> IO ()
updateCleanup :: IORef OptionMap -> Int -> IO () -> IO ()

module Network.Curl.Info
data Info
EffectiveUrl :: Info
ResponseCode :: Info
TotalTime :: Info
NameLookupTime :: Info
ConnectTime :: Info
PreTransferTime :: Info
SizeUpload :: Info
SizeDownload :: Info
SpeedDownload :: Info
SpeedUpload :: Info
HeaderSize :: Info
RequestSize :: Info
SslVerifyResult :: Info
Filetime :: Info
ContentLengthDownload :: Info
ContentLengthUpload :: Info
StartTransferTime :: Info
ContentType :: Info
RedirectTime :: Info
RedirectCount :: Info
Private :: Info
HttpConnectCode :: Info
HttpAuthAvail :: Info
ProxyAuthAvail :: Info
OSErrno :: Info
NumConnects :: Info
SslEngines :: Info
CookieList :: Info
LastSocket :: Info
FtpEntryPath :: Info
data InfoValue
IString :: String -> InfoValue
ILong :: Long -> InfoValue
IDouble :: Double -> InfoValue
IList :: [String] -> InfoValue
getInfo :: Curl -> Info -> IO InfoValue
instance Show Info
instance Enum Info
instance Bounded Info
instance Show InfoValue

module Network.Curl.Post
type Header = String
data HttpPost
HttpPost :: String -> Maybe String -> Content -> [Header] -> Maybe String -> HttpPost
postName :: HttpPost -> String
contentType :: HttpPost -> Maybe String
content :: HttpPost -> Content
extraHeaders :: HttpPost -> [Header]
showName :: HttpPost -> Maybe String
data Content
ContentFile :: FilePath -> Content
ContentBuffer :: (Ptr CChar) -> Long -> Content
ContentString :: String -> Content
multiformString :: String -> String -> HttpPost
sizeof_httppost :: Int
marshallPosts :: [HttpPost] -> IO (Ptr HttpPost)
marshallPost :: HttpPost -> IO (Ptr HttpPost)
curl_slist_append :: Ptr Slist_ -> CString -> IO (Ptr Slist_)
curl_slist_free :: Ptr Slist_ -> IO ()
curl_formfree :: Ptr a -> IO ()


-- | This module contains the various options that specify what happens
--   when we use <tt>perform</tt> on a <tt>Curl</tt> handle.
module Network.Curl.Opts
data CurlOption

-- | external pointer to pass to as <a>WriteFunction</a>s last argument.
CurlFileObj :: (Ptr ()) -> CurlOption

-- | the URL to use for next request; can be the full URL or just the
--   authority/hostname.
CurlURL :: URLString -> CurlOption

-- | what port to use.
CurlPort :: Long -> CurlOption

-- | name of proxy
CurlProxy :: String -> CurlOption

-- | the <a>user:pass</a> string to use
CurlUserPwd :: String -> CurlOption

-- | same thing, but for the proxy.
CurlProxyUserPwd :: String -> CurlOption

-- | byte range to fetch
CurlRange :: String -> CurlOption

-- | external pointer to pass to as <a>WriteFunction</a>s last argument.
CurlInFile :: FilePath -> CurlOption

-- | buffer for curl to deposit error messages (must at least
--   CURL_ERROR_SIZE bytes long). Uses standard error if not specified.
CurlErrorBuffer :: (Ptr CChar) -> CurlOption

-- | callback to handle incoming data.
CurlWriteFunction :: WriteFunction -> CurlOption

-- | callback for supplying outgoing/uploaded data.
CurlReadFunction :: ReadFunction -> CurlOption

-- | number of seconds before timing out curl operation/request.
CurlTimeout :: Long -> CurlOption

-- | expected size of uploaded data.
CurlInFileSize :: Long -> CurlOption

-- | (Multipart) POST data.
CurlPostFields :: [String] -> CurlOption

-- | Set the Referer: header to the given string.
CurlReferer :: String -> CurlOption

-- | The string to feed to the FTP PORT command.
CurlFtpPort :: String -> CurlOption

-- | Set the User-Agent: header to the given string.
CurlUserAgent :: String -> CurlOption

-- | If the bytes per sec drops below the given value, the operation is
--   aborted.
CurlLowSpeed :: Long -> CurlOption

-- | Upper bound for request to complete.
CurlLowSpeedTime :: Long -> CurlOption

-- | Byte offset at which the transfer (HTTP or FTP) should start from.
CurlResumeFrom :: Long -> CurlOption

-- | Set the Cookie: header to the given cookie (name=value pairs,
--   semicolon-separated) string.
CurlCookie :: String -> CurlOption

-- | Embellish the outgoing request with the given list of (formatted)
--   header values.
CurlHttpHeaders :: [String] -> CurlOption

-- | (Multipart) POST data.
CurlHttpPost :: [HttpPost] -> CurlOption

-- | file holding your private SSL certificates (default format is PEM).
CurlSSLCert :: FilePath -> CurlOption

-- | password to the above file.
CurlSSLPassword :: String -> CurlOption

-- | an alias for the previous.
CurlSSLKeyPassword :: String -> CurlOption

-- | If true, convert Unix newlines into CRLFs when transferring.
CurlCRLF :: Bool -> CurlOption

-- | Sequence of FTP commands to execute prior to the main request.
CurlQuote :: [String] -> CurlOption

-- | State / pointer argument to pass to WriteFunction callback.
CurlWriteHeader :: (Ptr ()) -> CurlOption

-- | Path to file holding initial cookie data; also enables cookie
--   handling.
CurlCookieFile :: FilePath -> CurlOption

-- | What protocol to attempt using (0:default;1:TLS;2:SSLv2;3:SSLv3)
CurlSSLVersion :: Long -> CurlOption

-- | How to interpret a conditional time value.
CurlTimeCondition :: TimeCond -> CurlOption

-- | Number of secs since Jan 1, 1970. Interpretation is determined by
--   CurlTimeCondition.
CurlTimeValue :: Long -> CurlOption

-- | String holding alternative request command (WebDAV anyone?)
CurlCustomRequest :: String -> CurlOption

-- | List of commands to issue to FTP server after the main request.
CurlPostQuote :: [String] -> CurlOption

-- | Not sure what this one does; something about passing it to the output
--   function.
CurlWriteInfo :: String -> CurlOption

-- | Control verbosity
CurlVerbose :: Bool -> CurlOption

-- | Display outgoing and incoming headers
CurlHeader :: Bool -> CurlOption

-- | Control progress meter
CurlNoProgress :: Bool -> CurlOption

-- | Use HEAD instead of GET
CurlNoBody :: Bool -> CurlOption

-- | If status response is &gt;= 300, return an error (and no other
--   output).
CurlFailOnError :: Bool -> CurlOption

-- | Control the main dataflow, i.e., True to perform uploads.
CurlUpload :: Bool -> CurlOption

-- | Issue a POST request.
CurlPost :: Bool -> CurlOption

-- | Switch NLST for FTP directory listings
CurlFtpListOnly :: Bool -> CurlOption

-- | Control if FTP uploads append rather than overwrite files
CurlFtpAppend :: Bool -> CurlOption

-- | control how or if a user's.netrc will be consulted for user:password
CurlUseNetRc :: NetRcOption -> CurlOption

-- | Handle auto-redirects by chasing down Location: values in responses.
CurlFollowLocation :: Bool -> CurlOption

-- | Turn on ASCII transfers for FTP transfers; default is binary (i.e.
--   off).
CurlTransferTextASCII :: Bool -> CurlOption

-- | Use PUT to upload data.
CurlPut :: Bool -> CurlOption

-- | callback for showing progress
CurlProgressFunction :: ProgressFunction -> CurlOption

-- | state argumentto pass to progress callback.
CurlProgressData :: (Ptr ()) -> CurlOption

-- | Control if the Referer: field is set upon following Location:
--   redirects
CurlAutoReferer :: Bool -> CurlOption

-- | (Numeric) proxy port to use.
CurlProxyPort :: Long -> CurlOption

-- | Size of the POSTed data.
CurlPostFieldSize :: Long -> CurlOption

-- | tunnel all HTTP operations through the proxy.
CurlHttpProxyTunnel :: Bool -> CurlOption

-- | Interface name of outgoing network interface ( network interface, IP
--   address, host name.)
CurlInterface :: String -> CurlOption

-- | Kerberos security level (<a>clear</a>, <a>safe</a>,
--   <a>confidential</a>, <a>private</a> are good values, seemingly.)
CurlKrb4Level :: String -> CurlOption

-- | Enable the authentication of peer certificate. Default is True.
CurlSSLVerifyPeer :: Bool -> CurlOption

-- | If verifying peer's certificate, use certificates in this file to do
--   so.
CurlCAInfo :: FilePath -> CurlOption

-- | Maximum number of Location: redirects to chase down before giving up.
CurlMaxRedirs :: Long -> CurlOption

-- | Try to determine the modification date of remote document; can be
--   queried for.
CurlFiletime :: Bool -> CurlOption

-- | List of commands to use for initial telnet negotiations.
CurlTelnetOptions :: [String] -> CurlOption

-- | Maximum number of cached active connections.
CurlMaxConnects :: Long -> CurlOption

-- | No effect (obsolete.)
CurlClosePolicy :: Long -> CurlOption

-- | Force the opening up a new connection rather than try to reuse active
--   connections. Default is not to.
CurlFreshConnect :: Bool -> CurlOption

-- | Do not reuse the connection of next transfer when done.
CurlForbidReuse :: Bool -> CurlOption

-- | Path to file used to seed (Open)SSL PRNG.
CurlRandomFile :: FilePath -> CurlOption

-- | Path to domain socket of EG Daemon.
CurlEgdSocket :: FilePath -> CurlOption

-- | max number of seconds to wait for the initial connection to happen.
CurlConnectTimeout :: Long -> CurlOption

-- | callback used to handle _incoming_ header data.
CurlHeaderFunction :: WriteFunction -> CurlOption

-- | Revert to a GET for the next request.
CurlHttpGet :: Bool -> CurlOption

-- | Perform Common name checking in peer certificate (1=&gt;
--   existence;2=&gt; matches hostname.)
CurlSSLVerifyHost :: Long -> CurlOption

-- | Path to file where additional cookie information will be stored.
CurlCookieJar :: FilePath -> CurlOption

-- | Colon-separated string list of cipher preferences to use for upcoming
--   connection (e.g., <a>3DES:+RSA</a>)
CurlSSLCipherList :: String -> CurlOption

-- | What HTTP version to use, should you want to drop back for some
--   reason.
CurlHttpVersion :: HttpVersion -> CurlOption

-- | Attempt the use of EPSV before PASV for passive FTP downloads.
CurlFtpUseEPSV :: Bool -> CurlOption

-- | The format of your certificates (<a>PEM</a>, <a>DER</a>)
CurlSSLCertType :: String -> CurlOption

-- | Filename of private key.
CurlSSLKey :: FilePath -> CurlOption

-- | Format of private key; use <a>ENG</a> to load from a crypto engine.
CurlSSLKeyType :: String -> CurlOption

-- | Name of crypto engine to use.
CurlSSLEngine :: String -> CurlOption

-- | Make crypto engine the default for crypto operations.
CurlSSLEngineDefault :: CurlOption

-- | Have library uses its MT-unfriendly DNS global cache.
CurlDNSUseGlobalCache :: Bool -> CurlOption

-- | Number of seconds to cache results of DNS lookups in memory.
CurlDNSCacheTimeout :: Long -> CurlOption

-- | FTP commands to issue after connection and transfer mode has been set.
CurlPreQuote :: [String] -> CurlOption

-- | callback to catch and report transfer operations.
CurlDebugFunction :: DebugFunction -> CurlOption

-- | state argument to pass to debug callback.
CurlDebugData :: (Ptr ()) -> CurlOption

-- | Signal the start of a cookie session, ignoring previous session
--   cookies.
CurlCookieSession :: Bool -> CurlOption

-- | Directory holding CA certificates; used when verifying peer
--   certificate.
CurlCAPath :: FilePath -> CurlOption

-- | Turn (down, presumably) the buffers the received data is chunked up
--   into (and reported to the WriteFunction.) A hint, library is free to
--   ignore.
CurlBufferSize :: Long -> CurlOption

-- | Turn off use of signals internally.
CurlNoSignal :: Bool -> CurlOption

-- | Share handles are used for sharing data among concurrent Curl objects.
CurlShare :: (Ptr ()) -> CurlOption

-- | What type of proxy to use.
CurlProxyType :: Long -> CurlOption

-- | What to report in the Accept-Encoding: header
CurlEncoding :: String -> CurlOption

-- | Data associated with a Curl handle.
CurlPrivate :: (Ptr ()) -> CurlOption

-- | Alternatives to standard 200 OK response strings; whatever it takes, I
--   suppose.
CurlHttp200Aliases :: String -> CurlOption

-- | Pass on user:pass when following redirects.
CurlUnrestrictedAuth :: Bool -> CurlOption

-- | For active FTP downloads, try using EPRT command over LPRT.
CurlFtppUseEPRT :: Bool -> CurlOption

-- | State your authentication preferences.
CurlHttpAuth :: [HttpAuth] -> CurlOption

-- | callback to handle setting up SSL connections; have the power to abort
--   them.
CurlSSLCtxFunction :: SSLCtxtFunction -> CurlOption

-- | state argument to pass into the above callback.
CurlSSLCtxData :: (Ptr ()) -> CurlOption

-- | Have remote directories be created if not already there
CurlFtpCreateMissingDirs :: Bool -> CurlOption

-- | What preferred authentication schemes to use wrt. proxy.
CurlProxyAuth :: [HttpAuth] -> CurlOption

-- | max number of seconds to wait for remote server to ACK commands.
CurlFtpResponseTimeout :: Long -> CurlOption

-- | Whether to resolve wrt IPv4 or IPv6.
CurlIPResolve :: Long -> CurlOption

-- | Limit the number of bytes you're willing to download.
CurlMaxFileSize :: Long -> CurlOption

-- | Wider alternative of option giving upper bound of uploaded content (-1
--   =&gt; unknown.)
CurlInFileSizeLarge :: LLong -> CurlOption

-- | Wider alternative for specifying initial transfer offset.
CurlResumeFromLarge :: LLong -> CurlOption

-- | Wider alternative for specifying max download size.
CurlMaxFileSizeLarge :: LLong -> CurlOption

-- | Path to user's .netrc
CurlNetrcFile :: FilePath -> CurlOption

-- | Try enabling the use of SSL for FTP control connections and/or
--   transfers.
CurlFtpSSL :: Long -> CurlOption

-- | Size of data to POST; if unspecified (or -1), curl uses strlen().
CurlPostFieldSizeLarge :: LLong -> CurlOption

-- | Turn on or off the TCP/IP NODELAY option.
CurlTCPNoDelay :: Bool -> CurlOption

-- | Twiddle if TLS or SSL is used.
CurlFtpSSLAuth :: Long -> CurlOption

-- | somewhat obscure callback for handling read stream resets.
CurlIOCTLFunction :: (Ptr ()) -> CurlOption

-- | state argument to the above.
CurlIOCTLData :: (Ptr ()) -> CurlOption

-- | The string to use when server asks for account info.
CurlFtpAccount :: String -> CurlOption

-- | Cookie string to pass cookie engine; <a>ALL</a> scrubs all cookie
--   info; <a>SESS</a> scrubs session ones.
CurlCookieList :: String -> CurlOption

-- | If Content-Length: values are troublesome (wrong, perhaps?), use this
--   option to ignore using them as guidance.
CurlIgnoreContentLength :: Bool -> CurlOption

-- | Ignore IP address in 227 responses.
CurlFtpSkipPASVIP :: Bool -> CurlOption

-- | How to navigate to a file on the remote server (single, multiple
--   CWDs).
CurlFtpFileMethod :: Long -> CurlOption

-- | What local port to use for established connection.
CurlLocalPort :: Port -> CurlOption

-- | Number of attempts at finding local ports (using LocalPort as initial
--   base.)
CurlLocalPortRange :: Port -> CurlOption

-- | If enabled, perform all steps up until actual transfer. next three for
--   completeness.
CurlConnectOnly :: Bool -> CurlOption

-- | callback for doing character translations from network format.
CurlConvFromNetworkFunction :: (Ptr ()) -> CurlOption

-- | callback for doing character translations to network format.
CurlConvToNetworkFunction :: (Ptr ()) -> CurlOption

-- | callback for translating UTF8 into host encoding.
CurlConvFromUtf8Function :: (Ptr ()) -> CurlOption

-- | Specifies throttle value for outgoing data.
CurlMaxSendSpeedLarge :: LLong -> CurlOption

-- | Specifies throttle for incoming data.
CurlMaxRecvSpeedLarge :: LLong -> CurlOption

-- | Alternative (to user:pass) for FTP authentication; weird.
CurlFtpAlternativeToUser :: String -> CurlOption

-- | callback that's injected between socket creation and connection.
CurlSockOptFunction :: (Ptr ()) -> CurlOption

-- | state argument to the above.
CurlSockOptData :: (Ptr ()) -> CurlOption

-- | Enable the SSL session id cache; default is on, so use this to
--   disable.
CurlSSLSessionIdCache :: Bool -> CurlOption

-- | SSH authentication methods to use.
CurlSSHAuthTypes :: [SSHAuthType] -> CurlOption

-- | Path to file holding user's SSH public key.
CurlSSHPublicKeyFile :: FilePath -> CurlOption

-- | Path to file holding user's SSH private key.
CurlSSHPrivateKeyFile :: FilePath -> CurlOption

-- | Send CCC command after FTP connection has been authenticated.
CurlFtpSSLCCC :: Bool -> CurlOption

-- | Max number of milliseconds that a transfer may take.
CurlTimeoutMS :: Long -> CurlOption

-- | Max number of milliseconds that a connection attempt may take to
--   complete.
CurlConnectTimeoutMS :: Long -> CurlOption

-- | Disable transfer decoding; if disabled, curl will turn off chunking.
CurlHttpTransferDecoding :: Bool -> CurlOption

-- | Disable content decoding, getting the raw bits.
CurlHttpContentDecoding :: Bool -> CurlOption
data HttpVersion
HttpVersionNone :: HttpVersion
HttpVersion10 :: HttpVersion
HttpVersion11 :: HttpVersion
data TimeCond
TimeCondNone :: TimeCond
TimeCondIfModSince :: TimeCond
TimeCondIfUnmodSince :: TimeCond
TimeCondLastMode :: TimeCond
data NetRcOption
NetRcIgnored :: NetRcOption
NetRcOptional :: NetRcOption
NetRcRequired :: NetRcOption
data HttpAuth
HttpAuthNone :: HttpAuth
HttpAuthBasic :: HttpAuth
HttpAuthDigest :: HttpAuth
HttpAuthGSSNegotiate :: HttpAuth
HttpAuthNTLM :: HttpAuth
HttpAuthAny :: HttpAuth
HttpAuthAnySafe :: HttpAuth
toHttpAuthMask :: [HttpAuth] -> Long
data SSHAuthType
SSHAuthAny :: SSHAuthType
SSHAuthNone :: SSHAuthType
SSHAuthPublickey :: SSHAuthType
SSHAuthPassword :: SSHAuthType
SSHAuthHost :: SSHAuthType
SSHAuthKeyboard :: SSHAuthType
toSSHAuthMask :: [SSHAuthType] -> Long
type WriteFunction = Ptr CChar -> CInt -> CInt -> Ptr () -> IO CInt
type ReadFunction = Ptr CChar -> CInt -> CInt -> Ptr () -> IO (Maybe CInt)
type ReadFunctionPrim = Ptr CChar -> CInt -> CInt -> Ptr () -> IO CInt
type ProgressFunction = Ptr () -> Double -> Double -> Double -> Double -> IO CInt
type DebugFunction = Curl -> DebugInfo -> Ptr CChar -> CInt -> Ptr () -> IO ()
data DebugInfo
InfoText :: DebugInfo
InfoHeaderIn :: DebugInfo
InfoHeaderOut :: DebugInfo
InfoDataIn :: DebugInfo
InfoDataOut :: DebugInfo
InfoSslDataIn :: DebugInfo
InfoSslDataOut :: DebugInfo
type DebugFunctionPrim = CurlH -> CInt -> Ptr CChar -> CInt -> Ptr () -> IO CInt
type SSLCtxtFunction = CurlH -> Ptr () -> Ptr () -> IO CInt
curl_readfunc_abort :: CInt
baseLong :: Int
baseObject :: Int
baseFunction :: Int
baseOffT :: Int
unmarshallOption :: Unmarshaller a -> CurlOption -> IO a
data Unmarshaller a
Unmarshaller :: (Int -> Long -> IO a) -> (Int -> LLong -> IO a) -> (Int -> String -> IO a) -> (Int -> [String] -> IO a) -> (Int -> Ptr () -> IO a) -> (Int -> WriteFunction -> IO a) -> (Int -> ReadFunction -> IO a) -> (Int -> ProgressFunction -> IO a) -> (Int -> DebugFunction -> IO a) -> (Int -> [HttpPost] -> IO a) -> (Int -> SSLCtxtFunction -> IO a) -> (Int -> Ptr () -> IO a) -> (Int -> Ptr () -> IO a) -> (Int -> Ptr () -> IO a) -> (Int -> Ptr () -> IO a) -> (Int -> Ptr () -> IO a) -> Unmarshaller a
u_long :: Unmarshaller a -> Int -> Long -> IO a
u_llong :: Unmarshaller a -> Int -> LLong -> IO a
u_string :: Unmarshaller a -> Int -> String -> IO a
u_strings :: Unmarshaller a -> Int -> [String] -> IO a
u_ptr :: Unmarshaller a -> Int -> Ptr () -> IO a
u_writeFun :: Unmarshaller a -> Int -> WriteFunction -> IO a
u_readFun :: Unmarshaller a -> Int -> ReadFunction -> IO a
u_progressFun :: Unmarshaller a -> Int -> ProgressFunction -> IO a
u_debugFun :: Unmarshaller a -> Int -> DebugFunction -> IO a
u_posts :: Unmarshaller a -> Int -> [HttpPost] -> IO a
u_sslctxt :: Unmarshaller a -> Int -> SSLCtxtFunction -> IO a
u_ioctl_fun :: Unmarshaller a -> Int -> Ptr () -> IO a
u_convFromNetwork :: Unmarshaller a -> Int -> Ptr () -> IO a
u_convToNetwork :: Unmarshaller a -> Int -> Ptr () -> IO a
u_convFromUtf8 :: Unmarshaller a -> Int -> Ptr () -> IO a
u_sockoptFun :: Unmarshaller a -> Int -> Ptr () -> IO a
verboseUnmarshaller :: Unmarshaller a -> Unmarshaller a
u_bool :: Unmarshaller a -> Int -> Bool -> IO a
u_enum :: (Enum b) => Unmarshaller a -> Int -> b -> IO a
u_cptr :: Unmarshaller a -> Int -> Ptr CChar -> IO a
instance Eq DebugInfo
instance Enum DebugInfo
instance Enum NetRcOption
instance Enum TimeCond
instance Enum HttpVersion


-- | Haskell binding to the libcurl (http://curl.haxx.se/) "easy" API. The
--   "easy" API provides a higher-level, easy-to-get-started calling
--   interface to the library's wide range of features for interacting with
--   HTTP/FTP/etc servers.
module Network.Curl.Easy

-- | Initialise a curl instance
initialize :: IO Curl
perform :: Curl -> IO CurlCode
setopt :: Curl -> CurlOption -> IO CurlCode
duphandle :: Curl -> IO Curl
reset :: Curl -> IO ()
curl_global_init :: CInt -> IO CurlCode
curl_global_cleanup :: IO ()

module Network.Curl

-- | Should be used once to wrap all uses of libcurl. WARNING: the argument
--   should not return before it is completely done with curl (e.g., no
--   forking or lazy returns)
withCurlDo :: IO a -> IO a

-- | Set a list of options on a Curl handle.
setopts :: Curl -> [CurlOption] -> IO ()

-- | <a>CurlResponse</a> is a record type encoding all the information
--   embodied in a response to your Curl request. Currently only used to
--   gather up the results of doing a GET in <a>curlGetResponse</a>.
data CurlResponse
CurlResponse :: CurlCode -> Int -> String -> [(String, String)] -> String -> (Info -> IO InfoValue) -> CurlResponse
respCurlCode :: CurlResponse -> CurlCode
respStatus :: CurlResponse -> Int
respStatusLine :: CurlResponse -> String
respHeaders :: CurlResponse -> [(String, String)]
respBody :: CurlResponse -> String
respGetInfo :: CurlResponse -> (Info -> IO InfoValue)

-- | <a>curlGet</a> perform a basic GET, dumping the output on stdout. The
--   list of options are set prior performing the GET request.
curlGet :: URLString -> [CurlOption] -> IO ()

-- | <a>curlGetString</a> performs the same request as <a>curlGet</a>, but
--   returns the response body as a Haskell string.
curlGetString :: URLString -> [CurlOption] -> IO (CurlCode, String)

-- | <a>curlGetResponse</a> performs a GET, returning all the info it can
--   lay its hands on in the response, a value of type <a>CurlResponse</a>.
curlGetResponse :: URLString -> [CurlOption] -> IO CurlResponse

-- | Get the headers associated with a particular URL. Returns the status
--   line and the key-value pairs for the headers.
curlHead :: URLString -> [CurlOption] -> IO (String, [(String, String)])

-- | <a>curlMultiPost</a> perform a multi-part POST submission.
curlMultiPost :: URLString -> [CurlOption] -> [HttpPost] -> IO ()

-- | <a>curlPost</a> performs. a common POST operation, namely that of
--   submitting a sequence of name=value pairs.
curlPost :: URLString -> [String] -> IO ()
getResponseCode :: Curl -> IO Int
setDefaultSSLOpts :: Curl -> URLString -> IO ()

-- | Imports data into the Haskell world and invokes the callback.
callbackWriter :: (String -> IO ()) -> WriteFunction
easyWriter :: (String -> IO ()) -> WriteFunction

-- | The output of Curl is ignored. This function does not marshall data
--   into Haskell.
ignoreOutput :: WriteFunction

-- | Add chunks of data to an IORef as they arrive.
gatherOutput :: IORef [String] -> WriteFunction
method_GET :: [CurlOption]
method_HEAD :: [CurlOption]
method_POST :: [CurlOption]