h) b
! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~
2.91.30
Safe-Inferred "/1
gi-vte.Overrides used when generating these bindings. )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "(/1 gi-vte The major version number of the VTE library
(e.g. in version 3.1.4 this is 3). gi-vte The micro version number of the VTE library
(e.g. in version 3.1.4 this is 4). gi-vte The minor version number of the VTE library
(e.g. in version 3.1.4 this is 1). gi-vte3No description available in the introspection data. gi-vte3Use this as a spawn flag (together with flags from
) in
.Normally, the spawned process inherits the environment from the parent
process; when this flag is used, only the environment variables passed
to & etc. are passed to the child process. gi-vte3Use this as a spawn flag (together with flags from
) in
. Prevents etc. from moving the newly created child
process to a systemd user scope. Since: 0.60 gi-vte3Use this as a spawn flag (together with flags from
) in
. Requires etc. to move the newly created child
process to a systemd user scope; if that fails, the whole spawn fails. This is supported on Linux only. Since: 0.60 gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 Z/
gi-vte An enumeration type that can be used to specify how the terminal
uses extra allocated space. Since: 0.68 gi-vte An enumerated type which can be used to indicate the cursor blink mode
for the terminal. gi-vte An enumerated type which can be used to indicate what should the terminal
draw at the cursor position.
gi-vteAn enumerated type which can be used to indicate which string the terminal
should send to an application when the user presses the Delete or Backspace
keys. gi-vte An enumeration type that can be used to specify the format the selection
should be copied to the clipboard in. Since: 0.50 gi-vte3No description available in the introspection data. gi-vte An enum type for regex errors. In addition to the values listed above,
any PCRE2 error values may occur. Since: 0.46 gi-vte An enumerated type which can be used to indicate whether the terminal allows
the text contents to be blinked. Since: 0.52 gi-vte A flag type to determine how terminal contents should be written
to an output stream. gi-vtealign to left/top gi-vtealign to centre gi-vtealign to right/bottom gi-vte Catch-all for unknown values gi-vte)Follow GTK+ settings for cursor blinking. gi-vteCursor blinks. gi-vteCursor does not blink. gi-vte Catch-all for unknown values gi-vte*Draw a block cursor. This is the default. gi-vte Draw a vertical bar on the left side of character.
This is similar to the default cursor for other GTK+ widgets. gi-vte*Draw a horizontal bar below the character. gi-vte Catch-all for unknown values gi-vte For backspace, attempt to determine the right value from the terminal's IO settings. For delete, use the control sequence. gi-vte)Send an ASCII backspace character (0x08).! gi-vte&Send an ASCII delete character (0x7F)." gi-vte Send the "@7" control sequence.# gi-vte Send terminal's "erase" setting.$ gi-vte Catch-all for unknown values% gi-vteExport as plain text& gi-vte Export as HTML formatted text' gi-vte Catch-all for unknown values( gi-vteObsolete. Deprecated: 0.42) gi-vte,failure when using PTY98 to allocate the PTY* gi-vte Catch-all for unknown values+ gi-vte The PCRE2 library was built without
Unicode support which is required for VTE, gi-vte Regexes are not supported because VTE was
built without PCRE2 support- gi-vte Catch-all for unknown values. gi-vteDo not blink the text./ gi-vte4Allow blinking text only if the terminal is focused.0 gi-vte6Allow blinking text only if the terminal is unfocused.1 gi-vte)Allow blinking text. This is the default.2 gi-vte Catch-all for unknown values3 gi-vte3Write contents as UTF-8 text. This is the default.4 gi-vte Catch-all for unknown values5 gi-vteCatch exceptions of type #. This is a specialized version of .6 gi-vteHandle exceptions of type #. This is a specialized version of .7 gi-vteCatch exceptions of type #. This is a specialized version of .8 gi-vteHandle exceptions of type #. This is a specialized version of . /
!"#$%&'()*78+,-56./01234/
!"#$%&'()*78+,-56./01234 )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 "
z gi-vte!An enumeration type for features. Since: 0.62{ gi-vte3No description available in the introspection data.| gi-vte5whether VTE was built with bidirectional text support} gi-vte&whether VTE was built with ICU support~ gi-vte*whether VTE was built with systemd support gi-vte(whether VTE was built with SIXEL support gi-vtemask of all feature flags gi-vte Catch-all for unknown values gi-vteUnused. Deprecated: 0.38 gi-vteUnused. Deprecated: 0.38 gi-vteUnused. Deprecated: 0.38 gi-vteUnused. Deprecated: 0.38 gi-vteUnused. Deprecated: 0.38 gi-vte/Do not start a new session for the child in
5. See man:setsid(2) for more information. Since: 0.58 gi-vte>Do not set the PTY as the controlling TTY for the child
in 8. See man:tty_ioctl(4) for more information. Since: 0.58 gi-vtethe default flags gi-vte Catch-all for unknown values z|}~{z|}~{ )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 * gi-vteGets the user's shell, or . In the latter case, the
system default (usually "/bin/sh") should be used. gi-vte Returns the minor version of the VTE library at runtime.
Contrast this with which represents
the version of the VTE library that the code was compiled
with. Since: 0.40 gi-vte Returns the micro version of the VTE library at runtime.
Contrast this with which represents
the version of the VTE library that the code was compiled
with. Since: 0.40 gi-vte Returns the major version of the VTE library at runtime.
Contrast this with which represents
the version of the VTE library that the code was compiled
with. Since: 0.40 gi-vte.Gets a list of features vte was compiled with. Since: 0.40 gi-vte$Gets features VTE was compiled with. Since: 0.62 gi-vte,Gets the list of supported legacy encodings.If ICU support is not available, this returns an empty vector.
Note that UTF-8 is always supported; you can select it by
passing to . Since: 0.60 gi-vte$Queries whether the legacy encoding encoding is supported.>If ICU support is not available, this function always returns . Note that UTF-8 is always supported; you can select it by
passing to . Since: 0.60 gi-vteReturns:7 a newly allocated string with the
user's shell, or gi-vteReturns: the minor version gi-vteReturns: the micro version gi-vteReturns: the major version gi-vteReturns: a string with features gi-vteReturns: flags from gi-vteincludeAliases : whether to include alias names gi-vteReturns:/ the list of supported encodings; free with
gi-vteencoding!: the name of the legacy encoding gi-vteReturns: iff the legacy encoding encoding
is supported )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 ? gi-vte1Type class for types which can be safely cast to , for instance with . gi-vte Memory-managed wrapper type. gi-vteCast to , for types for which this is known to be safe. For general casts, use . gi-vteGet the value of the @fd@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to pty #fd
gi-vte Construct a with valid value for the @fd>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @flags@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to pty #flags
gi-vte Construct a with valid value for the @flags>@ property. This is rarely needed directly, but it is used by . gi-vteCreates a new for the PTY master fd. No entry will be made in the lastlog, utmp or wtmp system files. Note that the newly created will take ownership of fd
and close it on finalize. gi-vte Allocates a new pseudo-terminal.You can later use fork() or the 4 family of functions
to start a process on the PTY. If using fork(), you MUST call in the child. If using # and friends, you MUST either use
0 directly as the child setup function, or call
- from your own child setup function supplied. When using !& with a custom child setup
function, will be called before the supplied
function; you must not call it again.Also, you MUST pass the " flag.Note also that #, $,
and % are not supported, since stdin, stdout
and stderr of the child process will always be connected to the PTY..Note that you should set the PTY's size using before
spawning the child process, so that the child process has the correct
size from the start instead of starting with a default size and then
shortly afterwards receiving a SIGWINCH signal. You
should prefer using & which does this
automatically. gi-vte3No description available in the introspection data. gi-vteSince 0.42 this is a no-op. gi-vte3No description available in the introspection data. gi-vte(Reads the pseudo terminal's window size.#If getting the window size failed, error will be set to a '(. gi-vteAttempts to resize the pseudo terminal's window size. If successful, the
OS kernel will send SIGWINCH to the child process group.#If setting the window size failed, error will be set to a '(. gi-vteTells the kernel whether the terminal is UTF-8 or not, in case it can make
use of the info. Linux 2.6.5 or so defines IUTF8 to make the line
discipline do multibyte backspace correctly. gi-vteLike ) , except that this function does not
allow passing file descriptors to the child process. See )
for more information. Since: 0.48 gi-vte3No description available in the introspection data. Since: 0.48 gi-vteConvert
to and from *+. See * , and * -.
gi-vtefd : a file descriptor to the PTY gi-vte cancellable: a ./, or gi-vteReturns: a new for fd, or on error with error filled in (Can throw 0) gi-vteflags
: flags from 1 gi-vte cancellable: a ./, or gi-vteReturns: a new , or on error with error filled in (Can throw 0) gi-vtepty: a gi-vtepty: a gi-vtepty: a gi-vteReturns:* the file descriptor of the PTY master in pty$. The
file descriptor belongs to pty4 and must not be closed or have
its flags changed gi-vtepty: a gi-vte (Can throw 0) gi-vtepty: a gi-vterows : the desired number of rows gi-vtecolumns : the desired number of columns gi-vte (Can throw 0) gi-vtepty: a gi-vteutf8): whether or not the pty is in UTF-8 mode gi-vte (Can throw 0) gi-vtepty: a gi-vteworkingDirectory=: the name of a directory the command should start
in, or % to use the current working directory gi-vteargv: child's argument vector gi-vteenvv : a list of environment
variables to be added to the environment before starting the process, or gi-vte
spawnFlags
: flags from
gi-vte
childSetup : an extra child setup function to run in the child just before exec(), or gi-vtetimeout : a timeout value in ms, -1 for the default timeout, or G_MAXINT to wait indefinitely gi-vte cancellable: a ./, or gi-vtecallback: a 23, or gi-vtepty: a gi-vteresult: a 45 gi-vte (Can throw 0)
)Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 L gi-vte Specifies the type of a selection function used to check whether
a cell has to be selected or not. gi-vte Specifies the type of a selection function used to check whether
a cell has to be selected or not. gi-vte0Type for the callback on the (unwrapped) C side. gi-vte
Callback for 6. On success, pid. contains the PID of the spawned process, and error
is .
On failure, pid is -1 and error contains the error information. Since: 0.48 gi-vte
Callback for 6. On success, pid. contains the PID of the spawned process, and error
is .
On failure, pid is -1 and error contains the error information. Since: 0.48 gi-vte0Type for the callback on the (unwrapped) C side. gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte Given a pointer to a foreign C function, wrap it into a function callable from Haskell. gi-vteA convenience synonym for :: . gi-vteA convenience synonym for :: . gi-vte4A simple wrapper that ignores the closure arguments. gi-vteWrap the callback into a . gi-vteWrap a into a . gi-vte Given a pointer to a foreign C function, wrap it into a function callable from Haskell. gi-vteA convenience synonym for :: . gi-vteA convenience synonym for :: . gi-vte4A simple wrapper that ignores the closure arguments. gi-vteWrap the callback into a . gi-vteWrap a into a . gi-vteterminal : terminal in which the cell is. gi-vtecolumn : column in which the cell is. gi-vterow: row in which the cell is. gi-vtedata : user data. gi-vteReturns: if cell has to be selected; if otherwise. gi-vteterminal : terminal in which the cell is. gi-vtecolumn : column in which the cell is. gi-vterow: row in which the cell is. gi-vteReturns: if cell has to be selected; if otherwise. gi-vteterminal: the 7 gi-vtepid: a GPid gi-vteerror: a , or gi-vteuserData7: user data that was passed to vte_terminal_spawn_async gi-vteterminal: the 7 gi-vtepid: a GPid gi-vteerror: a , or gi-vteterminal: the 7 gi-vtepid: a GPid gi-vteerror: a , or gi-vteuserData7: user data that was passed to vte_terminal_spawn_async gi-vteterminal : terminal in which the cell is. gi-vtecolumn : column in which the cell is. gi-vterow: row in which the cell is. gi-vtedata : user data. gi-vteReturns: if cell has to be selected; if otherwise. )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 N: gi-vte Memory-managed wrapper type. gi-vte Construct a struct initialized to zero. )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 XS gi-vte Memory-managed wrapper type. gi-vte Compiles pattern- into a regex for use as a match regex
with 8 or
'vte_terminal_event_check_regex_simple(). See man:pcre2pattern(3) for information
about the supported regex language. The regex will be compiled using PCRE2_UTF and
possibly other flags, in addition to the flags supplied in flags. gi-vte Compiles pattern. into a regex for use as a search regex
with 9. See man:pcre2pattern(3) for information
about the supported regex language. The regex will be compiled using PCRE2_UTF and
possibly other flags, in addition to the flags supplied in flags. gi-vte.If the platform supports JITing, JIT compiles regex. gi-vte!Increases the reference count of regex by one. gi-vte See man:pcre2api(3) and man:pcre2_substitute(3) for more information. Since: 0.56 gi-vte!Decreases the reference count of regex by one, and frees regex
if the refcount reaches zero. gi-vteConvert
to and from *+. See * , and * -. gi-vtepattern: a regex pattern string gi-vte
patternLength: the length of pattern in bytes, or -1 if the
string is NUL-terminated and the length is unknown gi-vteflags: PCRE2 compile flags gi-vteReturns: a newly created , or with error filled in (Can throw 0) gi-vtepattern: a regex pattern string gi-vte
patternLength: the length of pattern in bytes, or -1 if the
string is NUL-terminated and the length is unknown gi-vteflags: PCRE2 compile flags gi-vteReturns: a newly created , or with error filled in (Can throw 0) gi-vteregex: a gi-vteflags: PCRE2 JIT flags, or 0 gi-vte (Can throw 0) gi-vteregex: a gi-vteReturns: regex gi-vteregex: a gi-vtesubject: the subject string gi-vte replacement: the replacement string gi-vteflags: PCRE2 match flags gi-vteReturns: the substituted string, or
if an error occurred (Can throw 0) gi-vteregex: a gi-vteReturns: : )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 Y )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 gi-vte1Type class for types which can be safely cast to , for instance with . gi-vte Memory-managed wrapper type. gi-vteCast to , for types for which this is known to be safe. For general casts, use . gi-vteEmitted when the *GI.Vte.Objects.Terminal#g:attr:windowTitleTerminal:windowTitle property is modified. gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. gi-vte>Emitted whenever the contents of terminal's selection changes. gi-vteNever emitted. gi-vte+Emitted at the child application's request. gi-vteNever emitted. gi-vteNever emitted. gi-vteEmitted whenever is called. gi-vteNever emitted. gi-vteNever emitted. gi-vteNever emitted. gi-vte Emitted when the user hits the '+' key while holding the Control key. gi-vteNever emitted. gi-vte3No description available in the introspection data. gi-vte+Emitted when the hovered hyperlink changes.uri and bbox are owned by VTE, must not be modified, and might
change after the signal handlers returns.The signal is not re-emitted when the bounding box changes for the
same hyperlink. This might change in a future VTE version without notice. Since: 0.50 gi-vteEmitted when the terminal receives an end-of-file from a child which
is running in the terminal. This signal is frequently (but not
always) emitted with a ,GI.Vte.Objects.Terminal#g:signal:childExitedTerminal::childExited signal. gi-vte=Emitted whenever the terminal's current encoding has changed.*Note: support for non-UTF-8 is deprecated. gi-vteNever emitted. gi-vte Emitted when the user hits the '-' key while holding the Control key. gi-vte Emitted whenever the cursor moves to a new character cell. Used
primarily by VteTerminalAccessible. gi-vte.Emitted when the current file URI is modified. gi-vte3Emitted when the current directory URI is modified. gi-vteEmitted whenever is called. gi-vte Emitted whenever the visible appearance of the terminal has changed.
Used primarily by VteTerminalAccessible. gi-vte Emitted whenever the terminal receives input from the user and
prepares to send it to the child process. gi-vte This signal is emitted when the terminal detects that a child
watched using has exited. gi-vte Emitted whenever the cell size changes, e.g. due to a change in
font, font-scale or cell-width/height-scale. Note that this signal should rather be called "cell-size-changed". gi-vte This signal is emitted when the a child sends a bell request to the
terminal. gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte9Generate a function pointer callable from C code, from a . gi-vte!Connect a signal handler for the #signal:bellbell5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #bell callback
gi-vte!Connect a signal handler for the #signal:bellbell4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #bell callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:charSizeChangedcharSizeChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <$ terminal #charSizeChanged callback
gi-vte!Connect a signal handler for the #signal:charSizeChangedcharSizeChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =$ terminal #charSizeChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:childExited childExited5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #childExited callback
gi-vte!Connect a signal handler for the #signal:childExited childExited4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #childExited callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:commitcommit5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #commit callback
gi-vte!Connect a signal handler for the #signal:commitcommit4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #commit callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:contentsChangedcontentsChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <$ terminal #contentsChanged callback
gi-vte!Connect a signal handler for the #signal:contentsChangedcontentsChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =$ terminal #contentsChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:copyClipboard
copyClipboard5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <" terminal #copyClipboard callback
gi-vte!Connect a signal handler for the #signal:copyClipboard
copyClipboard4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =" terminal #copyClipboard callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the "#signal:currentDirectoryUriChangedcurrentDirectoryUriChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; </ terminal #currentDirectoryUriChanged callback
gi-vte!Connect a signal handler for the "#signal:currentDirectoryUriChangedcurrentDirectoryUriChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =/ terminal #currentDirectoryUriChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:currentFileUriChangedcurrentFileUriChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <* terminal #currentFileUriChanged callback
gi-vte!Connect a signal handler for the #signal:currentFileUriChangedcurrentFileUriChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =* terminal #currentFileUriChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:cursorMoved cursorMoved5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #cursorMoved callback
gi-vte!Connect a signal handler for the #signal:cursorMoved cursorMoved4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #cursorMoved callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:decreaseFontSizedecreaseFontSize5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <% terminal #decreaseFontSize callback
gi-vte!Connect a signal handler for the #signal:decreaseFontSizedecreaseFontSize4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =% terminal #decreaseFontSize callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:deiconifyWindowdeiconifyWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <$ terminal #deiconifyWindow callback
gi-vte!Connect a signal handler for the #signal:deiconifyWindowdeiconifyWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =$ terminal #deiconifyWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:encodingChangedencodingChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <$ terminal #encodingChanged callback
gi-vte!Connect a signal handler for the #signal:encodingChangedencodingChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =$ terminal #encodingChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:eofeof5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #eof callback
gi-vte!Connect a signal handler for the #signal:eofeof4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #eof callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:hyperlinkHoverUriChangedhyperlinkHoverUriChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <- terminal #hyperlinkHoverUriChanged callback
gi-vte!Connect a signal handler for the #signal:hyperlinkHoverUriChangedhyperlinkHoverUriChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =- terminal #hyperlinkHoverUriChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:iconTitleChangediconTitleChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <% terminal #iconTitleChanged callback
gi-vte!Connect a signal handler for the #signal:iconTitleChangediconTitleChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =% terminal #iconTitleChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:iconifyWindow
iconifyWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <" terminal #iconifyWindow callback
gi-vte!Connect a signal handler for the #signal:iconifyWindow
iconifyWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =" terminal #iconifyWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:increaseFontSizeincreaseFontSize5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <% terminal #increaseFontSize callback
gi-vte!Connect a signal handler for the #signal:increaseFontSizeincreaseFontSize4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =% terminal #increaseFontSize callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:lowerWindow lowerWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #lowerWindow callback
gi-vte!Connect a signal handler for the #signal:lowerWindow lowerWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #lowerWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:maximizeWindowmaximizeWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <# terminal #maximizeWindow callback
gi-vte!Connect a signal handler for the #signal:maximizeWindowmaximizeWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =# terminal #maximizeWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:moveWindow
moveWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #moveWindow callback
gi-vte!Connect a signal handler for the #signal:moveWindow
moveWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #moveWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:pasteClipboardpasteClipboard5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <# terminal #pasteClipboard callback
gi-vte!Connect a signal handler for the #signal:pasteClipboardpasteClipboard4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =# terminal #pasteClipboard callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:raiseWindow raiseWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #raiseWindow callback
gi-vte!Connect a signal handler for the #signal:raiseWindow raiseWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #raiseWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:refreshWindow
refreshWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <" terminal #refreshWindow callback
gi-vte!Connect a signal handler for the #signal:refreshWindow
refreshWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =" terminal #refreshWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:resizeWindow resizeWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <! terminal #resizeWindow callback
gi-vte!Connect a signal handler for the #signal:resizeWindow resizeWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =! terminal #resizeWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:restoreWindow
restoreWindow5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <" terminal #restoreWindow callback
gi-vte!Connect a signal handler for the #signal:restoreWindow
restoreWindow4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =" terminal #restoreWindow callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:selectionChangedselectionChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <% terminal #selectionChanged callback
gi-vte!Connect a signal handler for the #signal:selectionChangedselectionChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =% terminal #selectionChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:textDeleted textDeleted5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; < terminal #textDeleted callback
gi-vte!Connect a signal handler for the #signal:textDeleted textDeleted4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; = terminal #textDeleted callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:textInserted textInserted5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <! terminal #textInserted callback
gi-vte!Connect a signal handler for the #signal:textInserted textInserted4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =! terminal #textInserted callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:textModified textModified5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <! terminal #textModified callback
gi-vte!Connect a signal handler for the #signal:textModified textModified4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =! terminal #textModified callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:textScrolled textScrolled5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <! terminal #textScrolled callback
gi-vte!Connect a signal handler for the #signal:textScrolled textScrolled4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =! terminal #textScrolled callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vte!Connect a signal handler for the #signal:windowTitleChangedwindowTitleChanged5 signal, to be run before the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; <' terminal #windowTitleChanged callback
gi-vte!Connect a signal handler for the #signal:windowTitleChangedwindowTitleChanged4 signal, to be run after the default handler.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to ; =' terminal #windowTitleChanged callback
By default the object invoking the signal is not passed to the callback.
If you need to access it, you can use the implit ?self4 parameter.
Note that this requires activating the ImplicitParams GHC extension. gi-vteGet the value of the @
allow-bold@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #allowBold
gi-vteSet the value of the @
allow-bold@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #allowBold ? value ]
gi-vte Construct a with valid value for the @
allow-bold>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @allow-hyperlink@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #allowHyperlink
gi-vteSet the value of the @allow-hyperlink@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #allowHyperlink ? value ]
gi-vte Construct a with valid value for the @allow-hyperlink>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @ audible-bell@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #audibleBell
gi-vteSet the value of the @ audible-bell@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #audibleBell ? value ]
gi-vte Construct a with valid value for the @ audible-bell>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @backspace-binding@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #backspaceBinding
gi-vteSet the value of the @backspace-binding@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #backspaceBinding ? value ]
gi-vte Construct a with valid value for the @backspace-binding>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @bold-is-bright@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #boldIsBright
gi-vteSet the value of the @bold-is-bright@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #boldIsBright ? value ]
gi-vte Construct a with valid value for the @bold-is-bright>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @cell-height-scale@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #cellHeightScale
gi-vteSet the value of the @cell-height-scale@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #cellHeightScale ? value ]
gi-vte Construct a with valid value for the @cell-height-scale>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @cell-width-scale@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #cellWidthScale
gi-vteSet the value of the @cell-width-scale@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #cellWidthScale ? value ]
gi-vte Construct a with valid value for the @cell-width-scale>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @cjk-ambiguous-width@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #cjkAmbiguousWidth
gi-vteSet the value of the @cjk-ambiguous-width@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #cjkAmbiguousWidth ? value ]
gi-vte Construct a with valid value for the @cjk-ambiguous-width>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @current-directory-uri@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #currentDirectoryUri
gi-vteGet the value of the @current-file-uri@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #currentFileUri
gi-vteGet the value of the @cursor-blink-mode@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #cursorBlinkMode
gi-vteSet the value of the @cursor-blink-mode@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #cursorBlinkMode ? value ]
gi-vte Construct a with valid value for the @cursor-blink-mode>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @ cursor-shape@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #cursorShape
gi-vteSet the value of the @ cursor-shape@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #cursorShape ? value ]
gi-vte Construct a with valid value for the @ cursor-shape>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @delete-binding@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #deleteBinding
gi-vteSet the value of the @delete-binding@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #deleteBinding ? value ]
gi-vte Construct a with valid value for the @delete-binding>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @ enable-bidi@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #enableBidi
gi-vteSet the value of the @ enable-bidi@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #enableBidi ? value ]
gi-vte Construct a with valid value for the @ enable-bidi>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @enable-fallback-scrolling@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to # terminal #enableFallbackScrolling
gi-vteSet the value of the @enable-fallback-scrolling@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to >% terminal [ #enableFallbackScrolling ? value ]
gi-vte Construct a with valid value for the @enable-fallback-scrolling>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @enable-shaping@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #enableShaping
gi-vteSet the value of the @enable-shaping@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #enableShaping ? value ]
gi-vte Construct a with valid value for the @enable-shaping>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @ enable-sixel@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #enableSixel
gi-vteSet the value of the @ enable-sixel@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #enableSixel ? value ]
gi-vte Construct a with valid value for the @ enable-sixel>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @encoding@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #encoding
gi-vteSet the value of the @encoding@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #encoding ? value ]
gi-vte Construct a with valid value for the @encoding>@ property. This is rarely needed directly, but it is used by . gi-vteSet the value of the @encoding@ property to .
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to @ #encoding
gi-vteGet the value of the @ font-desc@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #fontDesc
gi-vteSet the value of the @ font-desc@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #fontDesc ? value ]
gi-vte Construct a with valid value for the @ font-desc>@ property. This is rarely needed directly, but it is used by . gi-vteSet the value of the @ font-desc@ property to .
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to @ #fontDesc
gi-vteGet the value of the @
font-scale@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #fontScale
gi-vteSet the value of the @
font-scale@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #fontScale ? value ]
gi-vte Construct a with valid value for the @
font-scale>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @hyperlink-hover-uri@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #hyperlinkHoverUri
gi-vteGet the value of the @
icon-title@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #iconTitle
gi-vteGet the value of the @
input-enabled@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #inputEnabled
gi-vteSet the value of the @
input-enabled@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #inputEnabled ? value ]
gi-vte Construct a with valid value for the @
input-enabled>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @pointer-autohide@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #pointerAutohide
gi-vteSet the value of the @pointer-autohide@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #pointerAutohide ? value ]
gi-vte Construct a with valid value for the @pointer-autohide>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @pty@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #pty
gi-vteSet the value of the @pty@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #pty ? value ]
gi-vte Construct a with valid value for the @pty>@ property. This is rarely needed directly, but it is used by . gi-vteSet the value of the @pty@ property to .
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to @ #pty
gi-vteGet the value of the @rewrap-on-resize@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #rewrapOnResize
gi-vteSet the value of the @rewrap-on-resize@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #rewrapOnResize ? value ]
gi-vte Construct a with valid value for the @rewrap-on-resize>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @scroll-on-keystroke@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #scrollOnKeystroke
gi-vteSet the value of the @scroll-on-keystroke@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #scrollOnKeystroke ? value ]
gi-vte Construct a with valid value for the @scroll-on-keystroke>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @scroll-on-output@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #scrollOnOutput
gi-vteSet the value of the @scroll-on-output@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #scrollOnOutput ? value ]
gi-vte Construct a with valid value for the @scroll-on-output>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @scroll-unit-is-pixels@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #scrollUnitIsPixels
gi-vteSet the value of the @scroll-unit-is-pixels@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #scrollUnitIsPixels ? value ]
gi-vte Construct a with valid value for the @scroll-unit-is-pixels>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @scrollback-lines@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #scrollbackLines
gi-vteSet the value of the @scrollback-lines@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #scrollbackLines ? value ]
gi-vte Construct a with valid value for the @scrollback-lines>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @text-blink-mode@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #textBlinkMode
gi-vteSet the value of the @text-blink-mode@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to > terminal [ #textBlinkMode ? value ]
gi-vte Construct a with valid value for the @text-blink-mode>@ property. This is rarely needed directly, but it is used by . gi-vteGet the value of the @ window-title@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #windowTitle
gi-vteGet the value of the @word-char-exceptions@ property.
When 9https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading" is enabled, this is equivalent to terminal #wordCharExceptions
gi-vte Creates a new terminal widget. gi-vte0Places the selected text in the terminal in the GDK_SELECTION_CLIPBOARD
selection. gi-vte0Places the selected text in the terminal in the GDK_SELECTION_CLIPBOARD%
selection in the form specified by format.)For all formats, the selection data (see AB&) will include the
text targets (see C D and
*gtk_selection_data_targets_includes_text()). For E,
the selection will also include the "text/html" target, which when requested,
returns the HTML data in UTF-16 with a U+FEFF BYTE ORDER MARK character at
the start. Since: 0.50 gi-vte0Places the selected text in the terminal in the GDK_SELECTION_PRIMARY
selection. gi-vte Interprets data2 as if it were data received from a child process. gi-vte Sends a block of UTF-8 text to the child as if it were entered by the user
at the keyboard. gi-vte*Sends a block of binary data to the child. gi-vte Checks whether or not the terminal will attempt to draw bold text,
by using a bold font variant. gi-vte Checks whether or not hyperlinks (OSC 8 escape sequence) are allowed. Since: 0.50 gi-vte Checks whether or not the terminal will beep when the child outputs the
"bl" sequence. gi-vteChecks whether the SGR 1 attribute also switches to the bright counterpart
of the first 8 palette colors, in addition to making them bold (legacy behavior)
or if SGR 1 only enables bold and leaves the color intact. Since: 0.52 gi-vte3No description available in the introspection data. Since: 0.52 gi-vte3No description available in the introspection data. Since: 0.52 gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. gi-vte Returns whether ambiguous-width characters are narrow or wide.
(Note that when using a non-UTF-8 encoding set via ,
the width of ambiguous-width characters is fixed and determined by the encoding
itself.) gi-vte*Returns the background colour, as used by terminal when
drawing the background, which may be different from
the color set by . Note: you must only call this function while handling the
GtkWidget #g:signal:drawdraw signal. This function is rarely useful. One use for it is if you disable
drawing the background (see 1)
and then need to draw the background yourself. Since: 0.54 gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. gi-vte,Returns the currently set cursor blink mode. gi-vte Reads the location of the insertion cursor and returns it. The row
coordinate is absolute. This method is unaware of BiDi. The returned column is logical column. gi-vte'Returns the currently set cursor shape. gi-vte Checks whether the terminal performs bidirectional text rendering. Since: 0.58 gi-vte3No description available in the introspection data. Since: 0.64 gi-vte/Checks whether the terminal shapes Arabic text. Since: 0.58 gi-vte3No description available in the introspection data. Since: 0.62 gi-vte Determines the name of the encoding in which the terminal expects data to be
encoded, or if UTF-8 is in use. gi-vteQueries the terminal for information about the fonts which will be
used to draw text in the terminal. The actual font takes the font scale
into account, this is not reflected in the return value, the unscaled
font is returned. gi-vte3No description available in the introspection data. gi-vteFills in some hints from terminal8's geometry. The hints
filled are those covered by the FG,
FH and FI flags.See J K for more information.terminal must be realized (see L M). gi-vteChecks if the terminal currently contains selected text. Note that this
is different from determining if the terminal is the owner of any
NO items. gi-vte3No description available in the introspection data. gi-vte.Returns whether the terminal allow user input. gi-vteDetermines the value of the terminal's mouse autohide setting. When
autohiding is enabled, the mouse cursor will be hidden when the user presses
a key and shown when the user moves the mouse. This setting can be changed
using . gi-vte Returns the P of terminal. gi-vte Checks whether or not the terminal will rewrap its contents upon resize. gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. Since: 0.52 gi-vte3No description available in the introspection data. Since: 0.52 gi-vte3No description available in the introspection data. Since: 0.66 gi-vte3No description available in the introspection data. Since: 0.52 gi-vte9Extracts a view of the visible part of the terminal. If
isSelected is not
", characters will only be read if
isSelected returns : after being
passed the column and row, respectively. A Q structure
is added to
attributes for each byte added to the returned string detailing
the character's position, colors, and other characteristics.8This method is unaware of BiDi. The columns returned in
attributes are
logical columns. Note: since 0.68, passing a non- array= parameter is deprecated. Starting with
0.72, passing a non- array1 parameter will make this function itself return . gi-vtePCRE2_MULTILINE
flag. Since: 0.46 gi-vte Checks if the text in and around the specified position matches any of the
regular expressions previously set using vte_terminal_match_add():. If a
match exists, the text string is returned and if tag is not , the number
associated with the matched regular expression will be stored in tag.7If more than one regular expression has been set with
vte_terminal_match_add() , then expressions are checked in the order in
which they were added. gi-vte Checks if the text in and around the position of the event matches any of the
regular expressions previously set using vte_terminal_match_add():. If a
match exists, the text string is returned and if tag is not , the number
associated with the matched regular expression will be stored in tag.7If more than one regular expression has been set with
vte_terminal_match_add() , then expressions are checked in the order in
which they were added. gi-vte Removes the regular expression which is associated with the given tag from
the list of expressions which the terminal will highlight when the user
moves the mouse cursor over matching text. gi-vte Clears the list of regular expressions the terminal uses to highlight text
when the user moves the mouse cursor. gi-vte Sets which cursor the terminal will use if the pointer is over the pattern
specified by tag%. The terminal keeps a reference to cursor. gi-vte Sets which cursor the terminal will use if the pointer is over the pattern
specified by tag. gi-vte Sets which cursor the terminal will use if the pointer is over the pattern
specified by tag. gi-vteSends the contents of the GDK_SELECTION_CLIPBOARD selection to the
terminal's child. It's called on paste menu item, or when
user presses Shift+Insert. gi-vteSends the contents of the GDK_SELECTION_PRIMARY selection to the terminal's
child. The terminal will call also paste the
GDK_SELECTION_PRIMARY selection when the user clicks with the the second
mouse button. gi-vteSends text to the terminal's child as if retrived from the clipboard,
this differs from in that it may process
text; before passing it to the child (e.g. apply bracketed mode) Since: 0.68 gi-vteCreates a new P$, sets the emulation property
from : emulation, and sets the size using
terminal's size.See
vte_pty_new() for more information. gi-vteResets as much of the terminal's internal state as possible, discarding any
unprocessed input data, resetting character attributes, cursor state,
national character set state, status line, terminal modes (insert/delete),
selection state, and encoding. gi-vte=Searches the next string matching the search regex set with
. gi-vte Searches the previous string matching the search regex set with
. gi-vte3No description available in the introspection data. gi-vte3No description available in the introspection data. Since: 0.46 gi-vte3No description available in the introspection data. gi-vte.This function does nothing since version 0.60. gi-vte Sets the regex to search for. Unsets the search regex when passed .
Note that regex should have been created using the
PCRE2_MULTILINE flag. Since: 0.46 gi-vte Sets whether search should wrap around to the beginning of the
terminal content when reaching its end. gi-vte Selects all text within the terminal (not including the scrollback buffer). gi-vte Controls whether or not the terminal will attempt to draw bold text,
by using a bold font variant. gi-vte Controls whether or not hyperlinks (OSC 8 escape sequence) are allowed. Since: 0.50 gi-vte Controls whether or not the terminal will beep when the child outputs the
"bl" sequence. gi-vteModifies the terminal's backspace key binding, which controls what
string or control sequence the terminal sends to its child when the user
presses the backspace key. gi-vteSets whether the SGR 1 attribute also switches to the bright counterpart
of the first 8 palette colors, in addition to making them bold (legacy behavior)
or if SGR 1 only enables bold and leaves the color intact. Since: 0.52 gi-vte)Sets the terminal's cell height scale to scale.This can be used to increase the line spacing. (The font's height is not affected.)
Valid values go from 1.0 (default) to 2.0 ("double spacing"). Since: 0.52 gi-vte(Sets the terminal's cell width scale to scale.This can be used to increase the letter spacing. (The font's width is not affected.)
Valid values go from 1.0 (default) to 2.0. Since: 0.52 gi-vteThis setting controls whether ambiguous-width characters are narrow or wide.
(Note that when using a non-UTF-8 encoding set via ,
the width of ambiguous-width characters is fixed and determined by the encoding
itself.) gi-vte Sets whether to paint the background with the background colour.
The default is . This function is rarely useful. One use for it is to add a background
image to the terminal. Since: 0.52 gi-vteSets the background color for text which does not have a specific background
color assigned. Only has effect when no background image is set and when
the terminal is not transparent. gi-vte Sets the color used to draw bold text in the default foreground color.
If bold is then the default color is used. gi-vte Sets the background color for text which is under the cursor. If , text
under the cursor will be drawn with foreground and background colors
reversed. gi-vte Sets the foreground color for text which is under the cursor. If , text
under the cursor will be drawn with foreground and background colors
reversed. Since: 0.44 gi-vte3Sets the foreground color used to draw normal text. gi-vte=Sets the background color for text which is highlighted. If ,
it is unset. If neither highlight background nor highlight foreground are set,
highlighted text (which is usually highlighted because it is selected) will
be drawn with foreground and background colors reversed. gi-vte=Sets the foreground color for text which is highlighted. If ,
it is unset. If neither highlight background nor highlight foreground are set,
highlighted text (which is usually highlighted because it is selected) will
be drawn with foreground and background colors reversed. gi-vtepalette specifies the new values for the 256 palette colors: 8 standard colors,
their 8 bright counterparts, 6x6x6 color cube, and 24 grayscale colors.
Omitted entries will default to a hardcoded value. paletteSize must be 0, 8, 16, 232 or 256.If
foreground is and paletteSize< is greater than 0, the new foreground
color is taken from palette [7]. If
background is and paletteSize< is
greater than 0, the new background color is taken from palette[0]. gi-vte1Sets whether or not the cursor will blink. Using S
will use the TU::gtk-cursor-blink setting. gi-vte#Sets the shape of the cursor drawn. gi-vte Reset the terminal palette to reasonable compiled-in default color. gi-vteModifies the terminal's delete key binding, which controls what
string or control sequence the terminal sends to its child when the user
presses the delete key. gi-vte Controls whether or not the terminal will perform bidirectional text rendering. Since: 0.58 gi-vte Controls whether the terminal uses scroll events to scroll the history
if the event was not otherwise consumed by it. This function is rarely useful, except when the terminal is added to a
VW , to perform kinetic scrolling (while vte itself does
not, yet, implement kinetic scrolling by itself). Since: 0.64 gi-vteControls whether or not the terminal will allow blinking text. Since: 0.52 gi-vteWith this function you can provide a set of characters which will
be considered parts of a word when doing word-wise selection, in
addition to the default which only considers alphanumeric characters
part of a word.The characters in
exceptions must be non-alphanumeric, each character
must occur only once, and if
exceptions contains the character
U+002D HYPHEN-MINUS, it must be at the start of the string.Use 9 to reset the set of exception characters to the default. Since: 0.40 gi-vte/A convenience function that wraps creating the P- and spawning
the child process on it. Like Y ,
except that this function does not allow passing file descriptors to
the child process. See Y for more
information. Since: 0.48 gi-vte Starts the specified command under a newly-allocated controlling
pseudo-terminal. The argv and envv lists should be -terminated.
The "TERM" environment variable is automatically set to a default value,
but can be overridden from envv.
ptyFlags controls logging the session to the specified system log files.
Note that " will always be added to
spawnFlags.Note also that #, $,
and % are not supported in
spawnFlags , since
stdin, stdout and stderr of the child process will always be connected to
the PTY.Note that all open file descriptors will be closed in the child. If you want
to keep some file descriptor open for use in the child process, you need to
use a child setup function that unsets the FD_CLOEXEC flag on that file
descriptor.See
vte_pty_new(), and for more information.!Beginning with 0.52, sets PWD to workingDirectory in order to preserve symlink components.
The caller should also make sure that symlinks were preserved while constructing the value of workingDirectory,
e.g. by using , Z or get_current_dir_name(). gi-vte Clears the current selection. gi-vteWatches childPid . When the process exists, the ,GI.Vte.Objects.Terminal#g:signal:childExitedTerminal::childExited5
signal will be called with the child's exit status."Prior to calling this function, a P must have been set in terminal
using (.
When the child exits, the terminal's P will be set to .Note: g_child_watch_add() or [ must not have
been called for childPid, nor a \] for it been created with
^.Note: when using the family of functions,
the " flag MUST have been passed. gi-vte*Write contents of the current contents of terminal( (including any
scrollback history) to stream according to flags.If cancellable is not , then the operation can be cancelled by triggering
the cancellable object from another thread. If the operation was cancelled,
the error _` will be returned in error.This is a synchronous operation and will make the widget (and input
processing) during the write operation, which may take a long time
depending on scrollback history and stream availability for writing. gi-vteConvert
to and from *+. See * , and * -. gi-vtewidth : the desired number of columns gi-vteheight : the desired number of rows gi-vtex/: the terminal's desired location, X coordinate gi-vtey/: the terminal's desired location, Y coordinate gi-vteuri2: the nonempty target URI under the mouse, or NULL gi-vtebbox8: the bounding box of the hyperlink anchor text, or NULL gi-vtetext: a string of text gi-vtesize#: the length of that string of text gi-vtestatus: the child's exit status gi-vtewidth : the new character cell width gi-vteheight : the new character cell height gi-vteReturns: a new object gi-vteterminal: a gi-vteterminal: a gi-vteformat: a a gi-vteterminal: a gi-vteterminal: a gi-vtedata-: a string in the terminal's current encoding gi-vteterminal: a gi-vtetext: data to send to the child gi-vteterminal: a gi-vtedata: data to send to the child gi-vteterminal: a gi-vteReturns: if bolding is enabled, if not gi-vteterminal: a gi-vteReturns: if hyperlinks are enabled, if not gi-vteterminal: a gi-vteReturns: if audible bell is enabled, if not gi-vteterminal: a gi-vteReturns: if bold also enables bright, if not gi-vteterminal: a gi-vteReturns:! the terminal's cell height scale gi-vteterminal: a gi-vteReturns: the terminal's cell width scale gi-vteterminal: a gi-vteReturns: the height of a character cellNote that this method should rather be called vte_terminal_get_cell_height,
because the return value takes cell-height-scale into account. gi-vteterminal: a gi-vteReturns: the width of a character cellNote that this method should rather be called vte_terminal_get_cell_width,
because the return value takes cell-width-scale into account. gi-vteterminal: a gi-vteReturns: 1 if ambiguous-width characters are narrow, or 2 if they are wide gi-vteterminal: a gi-vteterminal: a gi-vteReturns: the number of columns gi-vteterminal: a gi-vteReturns: the URI of the current directory of the
process running in the terminal, or gi-vteterminal: a gi-vteReturns: the URI of the current file the
process running in the terminal is operating on, or if
not set gi-vteterminal: a gi-vteReturns: cursor blink mode. gi-vteterminal: a gi-vteterminal: a gi-vteReturns: cursor shape. gi-vteterminal: a gi-vteReturns: if BiDi is enabled, if not gi-vteterminal: a gi-vteReturns: ! if fallback scrolling is enabled gi-vteterminal: a gi-vteReturns: if Arabic shaping is enabled, if not gi-vteterminal: a gi-vteReturns: gi-vteterminal: a gi-vteReturns:& the current encoding for the terminal gi-vteterminal: a gi-vteReturns: a bc describing the font the
terminal uses to render text at the default font scale of 1.0. gi-vteterminal: a gi-vteReturns: the terminal's font scale gi-vteterminal: a gi-vteminRows': the minimum number of rows to request gi-vte
minColumns*: the minimum number of columns to request gi-vteterminal: a gi-vteReturns: 1 if part of the text in the terminal is selected. gi-vteterminal: a gi-vteReturns: gi-vteterminal: a gi-vteterminal: a gi-vteReturns: if autohiding is enabled, if not gi-vteterminal: a gi-vteReturns: a P, or gi-vteterminal: a gi-vteReturns: if rewrapping is enabled, if not gi-vteterminal: a gi-vteReturns: the number of rows gi-vteterminal: a gi-vteReturns: whether or not the terminal will forcibly scroll to the bottom of
the viewable history when the user presses a key. Modifier keys do not
trigger this behavior. gi-vteterminal: a gi-vteReturns: whether or not the terminal will forcibly scroll to the bottom of
the viewable history when the new data is received from the child. gi-vteterminal: a gi-vteReturns: " if the scroll unit is pixels; or if the unit is lines gi-vteterminal: a gi-vteReturns: length of the scrollback buffer used by the terminal.
A negative value means "infinite scrollback". gi-vteterminal: a gi-vte
isSelected: a
d callback gi-vteReturns:# a newly allocated text string, or . gi-vteterminal: a gi-vteReturns: the blinking setting gi-vteterminal: a gi-vte
isSelected: a
d callback gi-vteReturns:# a newly allocated text string, or . gi-vteterminal: a gi-vtestartRow : first row to search for data gi-vtestartCol!: first column to search for data gi-vteendRow : last row to search for data gi-vteendCol : last column to search for data gi-vte
isSelected: a
d callback gi-vteReturns:# a newly allocated text string, or . gi-vteterminal: a gi-vteformat: the a to use gi-vteReturns:; a newly allocated string containing the selected text, or 8 if there is no selection or the format is not supported gi-vteterminal: a gi-vteReturns: the window title, or gi-vteterminal: a gi-vteReturns: a string, or gi-vteterminal: a gi-vteevent: a ef gi-vteReturns: a newly allocated string containing the target of the hyperlink,
or gi-vteterminal: a gi-vtegregex: a gh gi-vtegflags: the i to use when matching the regex gi-vteReturns: -1 gi-vteterminal: a gi-vteregex: a h gi-vteflags: PCRE2 match flags, or 0 gi-vteReturns:+ an integer associated with this expression gi-vteterminal: a gi-vtecolumn: the text column gi-vterow: the text row gi-vteReturns: a newly allocated string which matches one of the previously
set regular expressions gi-vteterminal: a gi-vteevent: a ef gi-vteReturns: a newly allocated string which matches one of the previously
set regular expressions, or if there is no match gi-vteterminal: a gi-vtetag : the tag of the regex to remove gi-vteterminal: a gi-vteterminal: a gi-vtetag<: the tag of the regex which should use the specified cursor gi-vtecursor: the jk which the terminal should use when the pattern is
highlighted, or to use the standard cursor gi-vteterminal: a gi-vtetag<: the tag of the regex which should use the specified cursor gi-vte
cursorName: the name of the cursor gi-vteterminal: a gi-vtetag<: the tag of the regex which should use the specified cursor gi-vte
cursorType: a lm gi-vteterminal: a gi-vteterminal: a gi-vteterminal: a gi-vtetext: a string to paste gi-vteterminal: a gi-vteflags
: flags from 1 gi-vte cancellable: a ./, or gi-vteReturns: a new P (Can throw 0) gi-vteterminal: a gi-vte
clearTabstops: whether to reset tabstops gi-vte clearHistory3: whether to empty the terminal's scrollback buffer gi-vteterminal: a gi-vteReturns: if a match was found gi-vteterminal: a gi-vteReturns: if a match was found gi-vteterminal: a gi-vteReturns: gi-vteterminal: a gi-vteReturns: the search h regex set in terminal, or gi-vteterminal: a gi-vteReturns:# whether searching will wrap around gi-vteterminal: a gi-vtegregex: a gh, or gi-vtegflags
: flags from i gi-vteterminal: a gi-vteregex: a h, or gi-vteflags: PCRE2 match flags, or 0 gi-vteterminal: a gi-vte
wrapAround : whether search should wrap gi-vteterminal: a gi-vteterminal: a gi-vte allowBold: 1 if the terminal should attempt to draw bold text gi-vteterminal: a gi-vteallowHyperlink: ( if the terminal should allow hyperlinks gi-vteterminal: a gi-vte isAudible: if the terminal should beep gi-vteterminal: a gi-vtebinding: a n for the backspace key gi-vteterminal: a gi-vte boldIsBright: " if bold should also enable bright gi-vteterminal: a gi-vtescale: the cell height scale gi-vteterminal: a gi-vtescale: the cell width scale gi-vteterminal: a gi-vtewidth : either 1 (narrow) or 2 (wide) gi-vteterminal: a gi-vtesetting!: whether to clear the background gi-vteterminal: a gi-vte
background: the new background color gi-vteterminal: a gi-vtebold: the new bold color or gi-vteterminal: a gi-vtecursorBackground/: the new color to use for the text cursor, or gi-vteterminal: a gi-vtecursorForeground/: the new color to use for the text cursor, or gi-vteterminal: a gi-vte
foreground: the new foreground color gi-vteterminal: a gi-vtehighlightBackground0: the new color to use for highlighted text, or gi-vteterminal: a gi-vtehighlightForeground0: the new color to use for highlighted text, or gi-vteterminal: a gi-vte
foreground : the new foreground color, or gi-vte
background : the new background color, or gi-vtepalette: the color palette gi-vteterminal: a gi-vtemode: the o to use gi-vteterminal: a gi-vteshape: the p to use gi-vteterminal: a gi-vteterminal: a gi-vtebinding: a n for the delete key gi-vteterminal: a gi-vte
enableBidi: to enable BiDi support gi-vteterminal: a gi-vteenable&: whether to enable fallback scrolling gi-vteterminal: a gi-vte
enableShaping: to enable Arabic shaping gi-vteterminal: a gi-vteenabled : whether to enable SIXEL images gi-vteterminal: a gi-vtecodeset: target charset, or
to use UTF-8 gi-vte (Can throw 0) gi-vteterminal: a gi-vtefontDesc: a bc for the desired font, or gi-vteterminal: a gi-vtescale: the font scale gi-vteterminal: a gi-vtewindow: a Jq gi-vteterminal: a gi-vteenabled : whether to enable user input gi-vteterminal: a gi-vtesetting+: whether the mouse pointer should autohide gi-vteterminal: a gi-vtepty: a P, or gi-vteterminal: a gi-vterewrap: ( if the terminal should rewrap on resize gi-vteterminal: a gi-vtescroll2: whether the terminal should scroll on keystrokes gi-vteterminal: a gi-vtescroll.: whether the terminal should scroll on output gi-vteterminal: a gi-vteenable&: whether to use pixels as scroll unit gi-vteterminal: a gi-vtelines": the length of the history buffer gi-vteterminal: a gi-vtecolumns : the desired number of columns gi-vterows : the desired number of rows gi-vteterminal: a gi-vte
textBlinkMode: the r to use gi-vteterminal: a gi-vte
exceptions/: a string of ASCII punctuation characters, or
gi-vteterminal: a gi-vteptyFlags
: flags from 1 gi-vteworkingDirectory=: the name of a directory the command should start
in, or % to use the current working directory gi-vteargv: child's argument vector gi-vteenvv : a list of environment
variables to be added to the environment before starting the process, or gi-vte
spawnFlags
: flags from
gi-vte
childSetup : an extra child setup function to run in the child just before exec(), or gi-vtetimeout : a timeout value in ms, -1 for the default timeout, or G_MAXINT to wait indefinitely gi-vte cancellable: a ./, or gi-vtecallback: a
s, or gi-vteterminal: a gi-vteptyFlags
: flags from 1 gi-vteworkingDirectory=: the name of a directory the command should start
in, or % to use the current working directory gi-vteargv: child's argument vector gi-vteenvv : a list of environment
variables to be added to the environment before starting the process, or gi-vte
spawnFlags
: flags from
gi-vte
childSetup : an extra child setup function to run in the child just before exec(), or gi-vte cancellable: a ./, or gi-vte (Can throw 0) gi-vteterminal: a gi-vteterminal: a gi-vtechildPid: a GPid gi-vteterminal: a gi-vtestream: a tu to write to gi-vteflags : a set of v gi-vte cancellable: a ./ object, or gi-vte (Can throw 0) w )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 x )Will Thompson and Iaki Garca EtxebarriaLGPL-2.1Iaki Garca Etxebarria
Safe-Inferred "/1 7 '%&
$#"! *()-+,210./347856z~|}{ y z { | } ~ o p n a r v S R E 1 P P Q Q h h 7 7
d
s
8 & 9 6 ! * 0 0 *+ *+ ? * * * * ; ; ; ; < > * - * , ; =gi-vte-2.91.30-inplace
GI.Vte.ConfigGI.Vte.Constants GI.Vte.Enums GI.Vte.FlagsGI.Vte.FunctionsGI.Vte.Objects.Pty GI.Vte.Structs.CharAttributesGI.Vte.Structs.RegexGI.Vte.Objects.TerminalGI.Vte.Callbacksgi-vte
GI.GLib.Flags
SpawnFlags
ptySpawnAsyncData.GI.Base.GErrorcatchGErrorJustDomainhandleGErrorJustDomain
ptyChildSetup
MINOR_VERSION
MICRO_VERSION
MAJOR_VERSIONterminalSetEncoding FeatureFlagsGI.GLib.FunctionsstrfreevData.GI.Base.ManagedPtrcastToData.GI.Base.AttributesgetData.GI.Base.Constructiblenew
spawnAsyncterminalSpawnSyncSpawnFlagsDoNotReapChildSpawnFlagsStdoutToDevNullSpawnFlagsStderrToDevNull SpawnFlagsChildInheritsStdinterminalPtyNewSync
GI.GLib.EnumsIOErrorptySpawnWithFdsAsyncData.GI.Base.GValueGValuetoGValue
fromGValueGI.Gio.Objects.Cancellable CancellableGErrorPtyFlagsGI.Gio.CallbacksAsyncReadyCallback GI.Gio.Interfaces.AsyncResult AsyncResultterminalSpawnAsyncTerminalterminalMatchAddRegexterminalSearchSetRegexGI.Vte.StructsData.GI.Base.Signalsonafterset:=clear GI.Gtk.Structs.SelectionData
SelectionDataGI.Gtk.Structs.TargetListtargetListAddTextTargets
FormatHtml GI.Gdk.FlagsWindowHintsResizeIncWindowHintsMinSizeWindowHintsBaseSizeGI.Gtk.Objects.WindowwindowSetGeometryHintsGI.Gtk.Objects.WidgetwidgetGetRealizedGI.Gtk.Objects.Clipboard ClipboardPtyCharAttributes
FormatTextCursorBlinkModeSystemGI.Gtk.Objects.SettingsSettings GI.Gtk.Objects.ScrolledWindowScrolledWindowwidgetModifyFontterminalSpawnWithFdsAsync
getCurrentDir
childWatchAddGI.GLib.Structs.SourceSourcechildWatchSourceNew GI.Gio.EnumsIOErrorEnumCancelledFormat GI.Pango.Structs.FontDescriptionFontDescription
SelectionFuncGI.Gdk.Unions.EventEventGI.GLib.Structs.RegexRegexRegexMatchFlagsGI.Gdk.Objects.CursorCursor GI.Gdk.Enums
CursorType EraseBindingCursorBlinkMode CursorShapeWindow
TextBlinkModeTerminalSpawnAsyncCallbackGI.Gio.Objects.OutputStream OutputStream
WriteFlagsGI.Vte.ObjectsGI.Vte overridesREGEX_FLAGS_DEFAULTSPAWN_NO_PARENT_ENVVSPAWN_NO_SYSTEMD_SCOPESPAWN_REQUIRE_SYSTEMD_SCOPETEST_FLAGS_ALLTEST_FLAGS_NONEAlignPtyError
RegexError
AlignStart AlignCenterAlignEnd AnotherAlignCursorBlinkModeOnCursorBlinkModeOffAnotherCursorBlinkModeCursorShapeBlockCursorShapeIbeamCursorShapeUnderlineAnotherCursorShapeEraseBindingAutoEraseBindingAsciiBackspaceEraseBindingAsciiDeleteEraseBindingDeleteSequenceEraseBindingTtyAnotherEraseBinding
AnotherFormatPtyErrorPtyHelperFailedPtyErrorPty98FailedAnotherPtyErrorRegexErrorIncompatibleRegexErrorNotSupportedAnotherRegexErrorTextBlinkModeNeverTextBlinkModeFocusedTextBlinkModeUnfocusedTextBlinkModeAlwaysAnotherTextBlinkModeWriteFlagsDefaultAnotherWriteFlagscatchRegexErrorhandleRegexError
catchPtyErrorhandlePtyError$fBoxedEnumWriteFlags$fTypedObjectWriteFlags$fHasParentTypesWriteFlags$fOrdWriteFlags$fEnumWriteFlags$fBoxedEnumTextBlinkMode$fTypedObjectTextBlinkMode $fHasParentTypesTextBlinkMode$fOrdTextBlinkMode$fEnumTextBlinkMode$fBoxedEnumRegexError$fTypedObjectRegexError$fHasParentTypesRegexError$fGErrorClassRegexError$fOrdRegexError$fEnumRegexError$fBoxedEnumPtyError$fTypedObjectPtyError$fHasParentTypesPtyError$fGErrorClassPtyError
$fOrdPtyError$fEnumPtyError$fBoxedEnumFormat$fTypedObjectFormat$fHasParentTypesFormat $fOrdFormat $fEnumFormat$fBoxedEnumEraseBinding$fTypedObjectEraseBinding $fHasParentTypesEraseBinding$fOrdEraseBinding$fEnumEraseBinding$fBoxedEnumCursorShape$fTypedObjectCursorShape$fHasParentTypesCursorShape$fOrdCursorShape$fEnumCursorShape$fBoxedEnumCursorBlinkMode $fTypedObjectCursorBlinkMode $fHasParentTypesCursorBlinkMode$fOrdCursorBlinkMode$fEnumCursorBlinkMode$fBoxedEnumAlign$fTypedObjectAlign$fHasParentTypesAlign
$fOrdAlign $fEnumAlign $fShowAlign $fEqAlign$fShowCursorBlinkMode$fEqCursorBlinkMode$fShowCursorShape$fEqCursorShape$fShowEraseBinding$fEqEraseBinding $fShowFormat
$fEqFormat$fShowPtyError $fEqPtyError$fShowRegexError$fEqRegexError$fShowTextBlinkMode$fEqTextBlinkMode$fShowWriteFlags$fEqWriteFlagsFeatureFlagsFlagBidiFeatureFlagsFlagIcuFeatureFlagsFlagSystemdFeatureFlagsFlagSixelFeatureFlagsFlagsMaskAnotherFeatureFlagsPtyFlagsNoLastlogPtyFlagsNoUtmpPtyFlagsNoWtmpPtyFlagsNoHelperPtyFlagsNoFallbackPtyFlagsNoSessionPtyFlagsNoCttyPtyFlagsDefaultAnotherPtyFlags$fIsGFlagPtyFlags$fBoxedFlagsPtyFlags$fTypedObjectPtyFlags$fHasParentTypesPtyFlags
$fOrdPtyFlags$fEnumPtyFlags$fIsGFlagFeatureFlags$fOrdFeatureFlags$fEnumFeatureFlags$fShowFeatureFlags$fEqFeatureFlags$fShowPtyFlags $fEqPtyFlags getUserShellgetMinorVersiongetMicroVersiongetMajorVersion getFeaturesgetFeatureFlags getEncodingsgetEncodingSupportedIsPtytoPtygetPtyFdconstructPtyFd getPtyFlagsconstructPtyFlagsptyNewForeignSync
ptyNewSyncptyCloseptyGetFd
ptyGetSize
ptySetSize
ptySetUtf8ptySpawnFinish$fIsGValueMaybe$fHasParentTypesPty $fGObjectPty$fTypedObjectPty$fManagedPtrNewtypePty$fIsPtyo$fEqPtynewZeroCharAttributes $fConstructibleCharAttributestag$fCallocPtrCharAttributes$fBoxedPtrCharAttributes!$fManagedPtrNewtypeCharAttributes$fEqCharAttributesregexNewForMatchregexNewForSearchregexJitregexRefregexSubstitute
regexUnref
$fGBoxedRegex$fTypedObjectRegex$fHasParentTypesRegex$fManagedPtrNewtypeRegex $fEqRegex
IsTerminal
toTerminalSelectionFunc_WithClosuresC_SelectionFunc'TerminalSpawnAsyncCallback_WithClosures C_TerminalSpawnAsyncCallbackmk_SelectionFunc mk_TerminalSpawnAsyncCallback"dynamic_TerminalSpawnAsyncCallback noTerminalSpawnAsyncCallback)noTerminalSpawnAsyncCallback_WithClosures(drop_closures_TerminalSpawnAsyncCallback%genClosure_TerminalSpawnAsyncCallback wrap_TerminalSpawnAsyncCallbackdynamic_SelectionFuncnoSelectionFunc noSelectionFunc_WithClosuresdrop_closures_SelectionFuncgenClosure_SelectionFuncwrap_SelectionFunc"TerminalWindowTitleChangedCallback TerminalTextScrolledCallback TerminalTextModifiedCallback TerminalTextInsertedCallbackTerminalTextDeletedCallback TerminalSelectionChangedCallback TerminalRestoreWindowCallback TerminalResizeWindowCallback TerminalRefreshWindowCallbackTerminalRaiseWindowCallback TerminalPasteClipboardCallbackTerminalMoveWindowCallback TerminalMaximizeWindowCallbackTerminalLowerWindowCallback TerminalIncreaseFontSizeCallback TerminalIconifyWindowCallback TerminalIconTitleChangedCallback(TerminalHyperlinkHoverUriChangedCallbackTerminalEofCallback TerminalEncodingChangedCallback TerminalDeiconifyWindowCallback TerminalDecreaseFontSizeCallbackTerminalCursorMovedCallback%TerminalCurrentFileUriChangedCallback*TerminalCurrentDirectoryUriChangedCallback TerminalCopyClipboardCallback TerminalContentsChangedCallbackTerminalCommitCallbackTerminalChildExitedCallback TerminalCharSizeChangedCallbackTerminalBellCallbackonTerminalBellafterTerminalBellonTerminalCharSizeChanged afterTerminalCharSizeChangedonTerminalChildExitedafterTerminalChildExitedonTerminalCommitafterTerminalCommitonTerminalContentsChanged afterTerminalContentsChangedonTerminalCopyClipboardafterTerminalCopyClipboard$onTerminalCurrentDirectoryUriChanged'afterTerminalCurrentDirectoryUriChanged onTerminalCurrentFileUriChanged"afterTerminalCurrentFileUriChangedonTerminalCursorMovedafterTerminalCursorMovedonTerminalDecreaseFontSize afterTerminalDecreaseFontSizeonTerminalDeiconifyWindow afterTerminalDeiconifyWindowonTerminalEncodingChanged afterTerminalEncodingChanged
onTerminalEofafterTerminalEof"onTerminalHyperlinkHoverUriChanged%afterTerminalHyperlinkHoverUriChangedonTerminalIconTitleChanged afterTerminalIconTitleChangedonTerminalIconifyWindowafterTerminalIconifyWindowonTerminalIncreaseFontSize afterTerminalIncreaseFontSizeonTerminalLowerWindowafterTerminalLowerWindowonTerminalMaximizeWindowafterTerminalMaximizeWindowonTerminalMoveWindowafterTerminalMoveWindowonTerminalPasteClipboardafterTerminalPasteClipboardonTerminalRaiseWindowafterTerminalRaiseWindowonTerminalRefreshWindowafterTerminalRefreshWindowonTerminalResizeWindowafterTerminalResizeWindowonTerminalRestoreWindowafterTerminalRestoreWindowonTerminalSelectionChanged afterTerminalSelectionChangedonTerminalTextDeletedafterTerminalTextDeletedonTerminalTextInsertedafterTerminalTextInsertedonTerminalTextModifiedafterTerminalTextModifiedonTerminalTextScrolledafterTerminalTextScrolled onTerminalWindowTitleChanged afterTerminalWindowTitleChangedgetTerminalAllowBoldsetTerminalAllowBoldconstructTerminalAllowBoldgetTerminalAllowHyperlinksetTerminalAllowHyperlink constructTerminalAllowHyperlinkgetTerminalAudibleBellsetTerminalAudibleBell constructTerminalAudibleBellgetTerminalBackspaceBindingsetTerminalBackspaceBinding!constructTerminalBackspaceBindinggetTerminalBoldIsBrightsetTerminalBoldIsBright constructTerminalBoldIsBrightgetTerminalCellHeightScalesetTerminalCellHeightScale constructTerminalCellHeightScalegetTerminalCellWidthScalesetTerminalCellWidthScale constructTerminalCellWidthScale getTerminalCjkAmbiguousWidth setTerminalCjkAmbiguousWidth"constructTerminalCjkAmbiguousWidth getTerminalCurrentDirectoryUrigetTerminalCurrentFileUrigetTerminalCursorBlinkModesetTerminalCursorBlinkMode constructTerminalCursorBlinkModegetTerminalCursorShapesetTerminalCursorShape constructTerminalCursorShapegetTerminalDeleteBindingsetTerminalDeleteBinding constructTerminalDeleteBindinggetTerminalEnableBidisetTerminalEnableBidiconstructTerminalEnableBidi"getTerminalEnableFallbackScrolling"setTerminalEnableFallbackScrolling(constructTerminalEnableFallbackScrollinggetTerminalEnableShapingsetTerminalEnableShaping constructTerminalEnableShapinggetTerminalEnableSixelsetTerminalEnableSixel constructTerminalEnableSixelgetTerminalEncodingsetTerminalEncodingconstructTerminalEncodingclearTerminalEncodinggetTerminalFontDescsetTerminalFontDescconstructTerminalFontDescclearTerminalFontDescgetTerminalFontScalesetTerminalFontScaleconstructTerminalFontScale getTerminalHyperlinkHoverUrigetTerminalIconTitlegetTerminalInputEnabledsetTerminalInputEnabled constructTerminalInputEnabledgetTerminalPointerAutohidesetTerminalPointerAutohide constructTerminalPointerAutohidegetTerminalPtysetTerminalPtyconstructTerminalPtyclearTerminalPtygetTerminalRewrapOnResizesetTerminalRewrapOnResize constructTerminalRewrapOnResize getTerminalScrollOnKeystroke setTerminalScrollOnKeystroke"constructTerminalScrollOnKeystrokegetTerminalScrollOnOutputsetTerminalScrollOnOutput constructTerminalScrollOnOutput getTerminalScrollUnitIsPixels setTerminalScrollUnitIsPixels#constructTerminalScrollUnitIsPixelsgetTerminalScrollbackLinessetTerminalScrollbackLines constructTerminalScrollbackLinesgetTerminalTextBlinkModesetTerminalTextBlinkMode constructTerminalTextBlinkModegetTerminalWindowTitle getTerminalWordCharExceptions terminalNewterminalCopyClipboardterminalCopyClipboardFormatterminalCopyPrimary terminalFeedterminalFeedChildterminalFeedChildBinaryterminalGetAllowBoldterminalGetAllowHyperlinkterminalGetAudibleBellterminalGetBoldIsBrightterminalGetCellHeightScaleterminalGetCellWidthScaleterminalGetCharHeightterminalGetCharWidth terminalGetCjkAmbiguousWidth!terminalGetColorBackgroundForDrawterminalGetColumnCount terminalGetCurrentDirectoryUriterminalGetCurrentFileUriterminalGetCursorBlinkModeterminalGetCursorPositionterminalGetCursorShapeterminalGetEnableBidi"terminalGetEnableFallbackScrollingterminalGetEnableShapingterminalGetEnableSixelterminalGetEncodingterminalGetFontterminalGetFontScaleterminalGetGeometryHintsterminalGetHasSelectionterminalGetIconTitleterminalGetInputEnabledterminalGetMouseAutohideterminalGetPtyterminalGetRewrapOnResizeterminalGetRowCount terminalGetScrollOnKeystroketerminalGetScrollOnOutput terminalGetScrollUnitIsPixelsterminalGetScrollbackLinesterminalGetTextterminalGetTextBlinkMode$terminalGetTextIncludeTrailingSpacesterminalGetTextRangeterminalGetTextSelectedterminalGetWindowTitle terminalGetWordCharExceptionsterminalHyperlinkCheckEventterminalMatchAddGregexterminalMatchCheckterminalMatchCheckEventterminalMatchRemoveterminalMatchRemoveAllterminalMatchSetCursorterminalMatchSetCursorNameterminalMatchSetCursorTypeterminalPasteClipboardterminalPastePrimaryterminalPasteText
terminalResetterminalSearchFindNextterminalSearchFindPreviousterminalSearchGetGregexterminalSearchGetRegexterminalSearchGetWrapAroundterminalSearchSetGregexterminalSearchSetWrapAroundterminalSelectAllterminalSetAllowBoldterminalSetAllowHyperlinkterminalSetAudibleBellterminalSetBackspaceBindingterminalSetBoldIsBrightterminalSetCellHeightScaleterminalSetCellWidthScale terminalSetCjkAmbiguousWidthterminalSetClearBackgroundterminalSetColorBackgroundterminalSetColorBoldterminalSetColorCursor terminalSetColorCursorForegroundterminalSetColorForegroundterminalSetColorHighlight#terminalSetColorHighlightForegroundterminalSetColorsterminalSetCursorBlinkModeterminalSetCursorShapeterminalSetDefaultColorsterminalSetDeleteBindingterminalSetEnableBidi"terminalSetEnableFallbackScrollingterminalSetEnableShapingterminalSetEnableSixelterminalSetFontterminalSetFontScale!terminalSetGeometryHintsForWindowterminalSetInputEnabledterminalSetMouseAutohideterminalSetPtyterminalSetRewrapOnResize terminalSetScrollOnKeystroketerminalSetScrollOnOutput terminalSetScrollUnitIsPixelsterminalSetScrollbackLinesterminalSetSizeterminalSetTextBlinkMode terminalSetWordCharExceptionsterminalUnselectAllterminalWatchChildterminalWriteContentsSync$fHasParentTypesTerminal$fGObjectTerminal$fTypedObjectTerminal$fManagedPtrNewtypeTerminal
$fIsTerminalo $fEqTerminalbase GHC.MaybeNothingghc-prim GHC.TypesFalseTrue haskell-gi-base-0.26.3-inplaceGValueConstructMaybeData.GI.Base.GClosureGClosure%mk_TerminalWindowTitleChangedCallback$C_TerminalWindowTitleChangedCallback mk_TerminalTextScrolledCallback C_TerminalTextScrolledCallback mk_TerminalTextModifiedCallback C_TerminalTextModifiedCallback mk_TerminalTextInsertedCallback C_TerminalTextInsertedCallback mk_TerminalTextDeletedCallback C_TerminalTextDeletedCallback#mk_TerminalSelectionChangedCallback"C_TerminalSelectionChangedCallback mk_TerminalRestoreWindowCallback C_TerminalRestoreWindowCallback mk_TerminalResizeWindowCallback C_TerminalResizeWindowCallback mk_TerminalRefreshWindowCallback C_TerminalRefreshWindowCallback mk_TerminalRaiseWindowCallback C_TerminalRaiseWindowCallback!mk_TerminalPasteClipboardCallback C_TerminalPasteClipboardCallback mk_TerminalMoveWindowCallback C_TerminalMoveWindowCallback!mk_TerminalMaximizeWindowCallback C_TerminalMaximizeWindowCallback mk_TerminalLowerWindowCallback C_TerminalLowerWindowCallback#mk_TerminalIncreaseFontSizeCallback"C_TerminalIncreaseFontSizeCallback mk_TerminalIconifyWindowCallback C_TerminalIconifyWindowCallback#mk_TerminalIconTitleChangedCallback"C_TerminalIconTitleChangedCallback+mk_TerminalHyperlinkHoverUriChangedCallback*C_TerminalHyperlinkHoverUriChangedCallbackmk_TerminalEofCallbackC_TerminalEofCallback"mk_TerminalEncodingChangedCallback!C_TerminalEncodingChangedCallback"mk_TerminalDeiconifyWindowCallback!C_TerminalDeiconifyWindowCallback#mk_TerminalDecreaseFontSizeCallback"C_TerminalDecreaseFontSizeCallback mk_TerminalCursorMovedCallback C_TerminalCursorMovedCallback(mk_TerminalCurrentFileUriChangedCallback'C_TerminalCurrentFileUriChangedCallback-mk_TerminalCurrentDirectoryUriChangedCallback,C_TerminalCurrentDirectoryUriChangedCallback mk_TerminalCopyClipboardCallback C_TerminalCopyClipboardCallback"mk_TerminalContentsChangedCallback!C_TerminalContentsChangedCallbackmk_TerminalCommitCallbackC_TerminalCommitCallback mk_TerminalChildExitedCallback C_TerminalChildExitedCallback"mk_TerminalCharSizeChangedCallback!C_TerminalCharSizeChangedCallbackmk_TerminalBellCallbackC_TerminalBellCallbackData.GI.Base.BasicTypes
ManagedPtrmanagedPtrIsDisownedmanagedPtrAllocCallStackmanagedForeignPtrGArray
GHashTableGVariant
GParamSpecGObjectIsGFlagAttrOpOnAfter:~>:~:=>:&= BoxedEnum
BoxedFlagsBoxedPtr boxedPtrCopy boxedPtrFreeCGType CallocPtrboxedPtrCallocGBoxed
GByteArrayGDestroyNotify
GEqualFunc GHashFuncGList GPtrArrayGSListGType
gtypeToCGTypeManagedPtrNewtype toManagedPtr
PtrWrapped unwrapPtr TypedObjectglibTypeUnexpectedNullPointerReturnnullPtrErrorMsg GErrorClassgerrorClassDomain
GErrorCode GErrorDomain
GErrorMessageIsGValue
gvalueSet_ gvalueGType_
gvalueGet_Data.GI.Base.GVariantGVariantDictEntryGVariantHandleGVariantObjectPathGVariantSignatureGVariantSinglet
IsGVarianttoGVariantFormatString fromGVariant
toGVariantIsGVariantBasicType SignalProxy:::PropertyNotify copyBytes Data.GI.Base.BasicConversionsbyteStringToCStringcstringToByteStringcstringToString
cstringToText gflagsToWordmapCArrayWithLength mapGArraymapGList mapGSList mapPtrArraymapZeroTerminatedCArraypackBlockArraypackByteStringpackFileNameArray
packGArraypackGByteArraypackGHashTable packGList
packGPtrArray
packGSListpackMapStorableArray"packMapZeroTerminatedStorableArray packPtrArraypackStorableArraypackUTF8CArray packZeroTerminatedByteString packZeroTerminatedFileNameArraypackZeroTerminatedPtrArray packZeroTerminatedStorableArray packZeroTerminatedUTF8CArraystringToCString
textToCStringunpackBlockArrayWithLengthunpackBoxedArrayWithLengthunpackByteStringWithLength unpackFileNameArrayWithLength unpackGArrayunpackGByteArrayunpackGHashTable unpackGListunpackGPtrArray unpackGSList unpackMapStorableArrayWithLength$unpackMapZeroTerminatedStorableArrayunpackPtrArrayWithLength unpackStorableArrayWithLengthunpackUTF8CArrayWithLength unpackZeroTerminatedByteString!unpackZeroTerminatedFileNameArray unpackZeroTerminatedPtrArray!unpackZeroTerminatedStorableArray unpackZeroTerminatedUTF8CArray unrefGArrayunrefGByteArrayunrefGHashTable
unrefPtrArraywithTextCString wordToGFlags g_list_free g_slist_free gtypeName noGParamSpeccatchGErrorJust checkGError
gerrorCode gerrorDomain
gerrorMessage gerrorNewhandleGErrorJustmaybePokeGErrorpropagateGErrorData.GI.Base.GHashTablecstringPackPtrcstringUnpackPtr gDirectEqual gDirectHash gStrEqualgStrHash
gvaluePackPtrgvalueUnpackPtr
ptrPackPtr ptrUnpackPtrdisownGVariantgvariantFromBoolgvariantFromBytestringgvariantFromDictEntrygvariantFromDoublegvariantFromGVariantgvariantFromHandlegvariantFromInt16gvariantFromInt32gvariantFromInt64gvariantFromListgvariantFromMapgvariantFromMaybegvariantFromObjectPathgvariantFromSignaturegvariantFromTextgvariantFromTuplegvariantFromWord16gvariantFromWord32gvariantFromWord64gvariantFromWord8gvariantGetTypeStringgvariantObjectPathToTextgvariantSignatureToTextgvariantToBoolgvariantToBytestringgvariantToDictEntrygvariantToDoublegvariantToGVariantgvariantToHandlegvariantToInt16gvariantToInt32gvariantToInt64gvariantToList
gvariantToMapgvariantToMaybegvariantToObjectPathgvariantToSignaturegvariantToTextgvariantToTuplegvariantToWord16gvariantToWord32gvariantToWord64gvariantToWord8newGVariantFromPtrnewGVariantObjectPathnewGVariantSignature
noGVariant
unrefGVariantwrapGVariantPtrcheckInstanceType copyBoxed copyBoxedPtr disownBoxeddisownManagedPtr disownObject freeBoxedmaybeWithManagedPtrnewBoxed
newManagedPtrnewManagedPtr'newManagedPtr_ newObjectnewPtr
releaseObjecttouchManagedPtr unrefObject unsafeCastTounsafeManagedPtrCastPtrunsafeManagedPtrGetPtrwithManagedPtrwithManagedPtrList
withTransient wrapBoxed
wrapObjectwrapPtrData.GI.Base.OverloadingasA