{- git-annex assistant commit thread
 -
 - Copyright 2012 Joey Hess <joey@kitenet.net>
 -
 - Licensed under the GNU GPL version 3 or higher.
 -}

{-# LANGUAGE CPP, BangPatterns #-}

module Assistant.Threads.Committer where

import Assistant.Common
import Assistant.Changes
import Assistant.Commits
import Assistant.Alert
import Assistant.ThreadedMonad
import Assistant.Threads.Watcher
import Assistant.TransferQueue
import Assistant.DaemonStatus
import Logs.Transfer
import qualified Annex.Queue
import qualified Git.Command
import qualified Git.HashObject
import qualified Git.LsFiles
import qualified Git.Version
import Git.Types
import qualified Command.Add
import Utility.ThreadScheduler
import qualified Utility.Lsof as Lsof
import qualified Utility.DirWatcher as DirWatcher
import Types.KeySource
import Config
import Annex.Exception

import Data.Time.Clock
import Data.Tuple.Utils
import qualified Data.Set as S
import Data.Either

thisThread :: ThreadName
thisThread = "Committer"

{- This thread makes git commits at appropriate times. -}
commitThread :: ThreadState -> ChangeChan -> CommitChan -> TransferQueue -> DaemonStatusHandle -> NamedThread
commitThread st changechan commitchan transferqueue dstatus = thread $ do
	delayadd <- runThreadState st $
		maybe delayaddDefault (Just . Seconds) . readish
			<$> getConfig (annexConfig "delayadd") "" 
	runEvery (Seconds 1) $ do
		-- We already waited one second as a simple rate limiter.
		-- Next, wait until at least one change is available for
		-- processing.
		changes <- getChanges changechan
		-- Now see if now's a good time to commit.
		time <- getCurrentTime
		if shouldCommit time changes
			then do
				readychanges <- handleAdds delayadd st changechan transferqueue dstatus changes
				if shouldCommit time readychanges
					then do
						debug thisThread
							[ "committing"
							, show (length readychanges)
							, "changes"
							]
						void $ alertWhile dstatus commitAlert $
							runThreadState st commitStaged
						recordCommit commitchan (Commit time)
					else refill readychanges
			else refill changes
	where
		thread = NamedThread thisThread
		refill [] = noop
		refill cs = do
			debug thisThread
				[ "delaying commit of"
				, show (length cs)
				, "changes"
				]
			refillChanges changechan cs
			

commitStaged :: Annex Bool
commitStaged = do
	{- This could fail if there's another commit being made by
	 - something else. -}
	v <- tryAnnex Annex.Queue.flush
	case v of
		Left _ -> return False
		Right _ -> do
			void $ inRepo $ Git.Command.runBool "commit" $ nomessage
				[ Param "--quiet"
				{- Avoid running the usual git-annex pre-commit hook;
				 - watch does the same symlink fixing, and we don't want
				 - to deal with unlocked files in these commits. -}
				, Param "--no-verify"
				]
			{- Empty commits may be made if tree changes cancel
			 - each other out, etc. Git returns nonzero on those,
			 - so don't propigate out commit failures. -}
			return True
	where
		nomessage ps
			| Git.Version.older "1.7.2" = Param "-m"
				: Param "autocommit" : ps
			| otherwise = Param "--allow-empty-message" 
				: Param "-m" : Param "" : ps

{- Decide if now is a good time to make a commit.
 - Note that the list of change times has an undefined order.
 -
 - Current strategy: If there have been 10 changes within the past second,
 - a batch activity is taking place, so wait for later.
 -}
shouldCommit :: UTCTime -> [Change] -> Bool
shouldCommit now changes
	| len == 0 = False
	| len > 10000 = True -- avoid bloating queue too much
	| length (filter thisSecond changes) < 10 = True
	| otherwise = False -- batch activity
	where
		len = length changes
		thisSecond c = now `diffUTCTime` changeTime c <= 1

{- OSX needs a short delay after a file is added before locking it down,
 - as pasting a file seems to try to set file permissions or otherwise
 - access the file after closing it. -}
delayaddDefault :: Maybe Seconds
#ifdef darwin_HOST_OS
delayaddDefault = Just $ Seconds 1
#else
delayaddDefault = Nothing
#endif

{- If there are PendingAddChanges, or InProcessAddChanges, the files
 - have not yet actually been added to the annex, and that has to be done
 - now, before committing.
 -
 - Deferring the adds to this point causes batches to be bundled together,
 - which allows faster checking with lsof that the files are not still open
 - for write by some other process, and faster checking with git-ls-files
 - that the files are not already checked into git.
 -
 - When a file is added, Inotify will notice the new symlink. So this waits
 - for additional Changes to arrive, so that the symlink has hopefully been
 - staged before returning, and will be committed immediately.
 -
 - OTOH, for kqueue, eventsCoalesce, so instead the symlink is directly
 - created and staged.
 -
 - Returns a list of all changes that are ready to be committed.
 - Any pending adds that are not ready yet are put back into the ChangeChan,
 - where they will be retried later.
 -}
handleAdds :: Maybe Seconds -> ThreadState -> ChangeChan -> TransferQueue -> DaemonStatusHandle -> [Change] -> IO [Change]
handleAdds delayadd st changechan transferqueue dstatus cs = returnWhen (null incomplete) $ do
	let (pending, inprocess) = partition isPendingAddChange incomplete
	pending' <- findnew pending
	(postponed, toadd) <- partitionEithers <$> safeToAdd delayadd st pending' inprocess

	unless (null postponed) $
		refillChanges changechan postponed

	returnWhen (null toadd) $ do
		added <- catMaybes <$> forM toadd add
		if DirWatcher.eventsCoalesce || null added
			then return $ added ++ otherchanges
			else do
				r <- handleAdds delayadd st changechan transferqueue dstatus
					=<< getChanges changechan
				return $ r ++ added ++ otherchanges
	where
		(incomplete, otherchanges) = partition (\c -> isPendingAddChange c || isInProcessAddChange c) cs
		
		findnew [] = return []
		findnew pending = do
			(!newfiles, cleanup) <- runThreadState st $
				inRepo (Git.LsFiles.notInRepo False $ map changeFile pending)
			void cleanup
			-- note: timestamp info is lost here
			let ts = changeTime (pending !! 0)
			return $ map (PendingAddChange ts) newfiles

		returnWhen c a
			| c = return otherchanges
			| otherwise = a

		add :: Change -> IO (Maybe Change)
		add change@(InProcessAddChange { keySource = ks }) =
			alertWhile' dstatus (addFileAlert $ keyFilename ks) $
				liftM ret $ catchMaybeIO $
					sanitycheck ks $ runThreadState st $ do
						showStart "add" $ keyFilename ks
						key <- Command.Add.ingest ks
						done (finishedChange change) (keyFilename ks) key
			where
				{- Add errors tend to be transient and will
				 - be automatically dealt with, so don't
				 - pass to the alert code. -}
				ret (Just j@(Just _)) = (True, j)
				ret _ = (True, Nothing)
		add _ = return Nothing

		done _ _ Nothing = do
			showEndFail
			return Nothing
		done change file (Just key) = do
			link <- Command.Add.link file key True
			when DirWatcher.eventsCoalesce $ do
				sha <- inRepo $
					Git.HashObject.hashObject BlobObject link
				stageSymlink file sha
			queueTransfers Next transferqueue dstatus key (Just file) Upload
			showEndOk
			return $ Just change

		{- Check that the keysource's keyFilename still exists,
		 - and is still a hard link to its contentLocation,
		 - before ingesting it. -}
		sanitycheck keysource a = do
			fs <- getSymbolicLinkStatus $ keyFilename keysource
			ks <- getSymbolicLinkStatus $ contentLocation keysource
			if deviceID ks == deviceID fs && fileID ks == fileID fs
				then a
				else return Nothing

{- Files can Either be Right to be added now,
 - or are unsafe, and must be Left for later.
 -
 - Check by running lsof on the temp directory, which
 - the KeySources are locked down in.
 -}
safeToAdd :: Maybe Seconds -> ThreadState -> [Change] -> [Change] -> IO [Either Change Change]
safeToAdd _ _ [] [] = return []
safeToAdd delayadd st pending inprocess = do
	maybe noop threadDelaySeconds delayadd
	runThreadState st $ do
		keysources <- mapM Command.Add.lockDown (map changeFile pending)
		let inprocess' = map mkinprocess (zip pending keysources)
		tmpdir <- fromRepo gitAnnexTmpDir
		openfiles <- S.fromList . map fst3 . filter openwrite <$>
			liftIO (Lsof.queryDir tmpdir)
		let checked = map (check openfiles) $ inprocess ++ inprocess'

		{- If new events are received when files are closed,
		 - there's no need to retry any changes that cannot
		 - be done now. -}
		if DirWatcher.closingTracked
			then do
				mapM_ canceladd $ lefts checked
				allRight $ rights checked
			else return checked
	where
		check openfiles change@(InProcessAddChange { keySource = ks })
			| S.member (contentLocation ks) openfiles = Left change
		check _ change = Right change

		mkinprocess (c, ks) = InProcessAddChange
			{ changeTime = changeTime c
			, keySource = ks
			}

		canceladd (InProcessAddChange { keySource = ks }) = do
			warning $ keyFilename ks
				++ " still has writers, not adding"
			-- remove the hard link
			void $ liftIO $ tryIO $
				removeFile $ contentLocation ks
		canceladd _ = noop

		openwrite (_file, mode, _pid) =
			mode == Lsof.OpenWriteOnly || mode == Lsof.OpenReadWrite

		allRight = return . map Right