/* Copyright 2011 Google Inc. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. Author: lode.vandevenne@gmail.com (Lode Vandevenne) Author: jyrki.alakuijala@gmail.com (Jyrki Alakuijala) */ #include "blocksplitter.h" #include #include #include #include "deflate.h" #include "lz77.h" #include "squeeze.h" #include "tree.h" #include "util.h" /* The "f" for the FindMinimum function below. i: the current parameter of f(i) context: for your implementation */ typedef double FindMinimumFun(size_t i, void* context); /* Finds minimum of function f(i) where is is of type size_t, f(i) is of type double, i is in range start-end (excluding end). */ static size_t FindMinimum(FindMinimumFun f, void* context, size_t start, size_t end) { if (end - start < 1024) { double best = ZOPFLI_LARGE_FLOAT; size_t result = start; size_t i; for (i = start; i < end; i++) { double v = f(i, context); if (v < best) { best = v; result = i; } } return result; } else { /* Try to find minimum faster by recursively checking multiple points. */ #define NUM 9 /* Good value: 9. */ size_t i; size_t p[NUM]; double vp[NUM]; size_t besti; double best; double lastbest = ZOPFLI_LARGE_FLOAT; size_t pos = start; for (;;) { if (end - start <= NUM) break; for (i = 0; i < NUM; i++) { p[i] = start + (i + 1) * ((end - start) / (NUM + 1)); vp[i] = f(p[i], context); } besti = 0; best = vp[0]; for (i = 1; i < NUM; i++) { if (vp[i] < best) { best = vp[i]; besti = i; } } if (best > lastbest) break; start = besti == 0 ? start : p[besti - 1]; end = besti == NUM - 1 ? end : p[besti + 1]; pos = p[besti]; lastbest = best; } return pos; #undef NUM } } /* Returns estimated cost of a block in bits. It includes the size to encode the tree and the size to encode all literal, length and distance symbols and their extra bits. litlens: lz77 lit/lengths dists: ll77 distances lstart: start of block lend: end of block (not inclusive) */ static double EstimateCost(const unsigned short* litlens, const unsigned short* dists, size_t lstart, size_t lend) { return ZopfliCalculateBlockSize(litlens, dists, lstart, lend, 2); } typedef struct SplitCostContext { const unsigned short* litlens; const unsigned short* dists; size_t llsize; size_t start; size_t end; } SplitCostContext; /* Gets the cost which is the sum of the cost of the left and the right section of the data. type: FindMinimumFun */ static double SplitCost(size_t i, void* context) { SplitCostContext* c = (SplitCostContext*)context; return EstimateCost(c->litlens, c->dists, c->start, i) + EstimateCost(c->litlens, c->dists, i, c->end); } static void AddSorted(size_t value, size_t** out, size_t* outsize) { size_t i; ZOPFLI_APPEND_DATA(value, out, outsize); if (*outsize > 0) { for (i = 0; i < *outsize - 1; i++) { if ((*out)[i] > value) { size_t j; for (j = *outsize - 1; j > i; j--) { (*out)[j] = (*out)[j - 1]; } (*out)[i] = value; break; } } } } /* Prints the block split points as decimal and hex values in the terminal. */ static void PrintBlockSplitPoints(const unsigned short* litlens, const unsigned short* dists, size_t llsize, const size_t* lz77splitpoints, size_t nlz77points) { size_t* splitpoints = 0; size_t npoints = 0; size_t i; /* The input is given as lz77 indices, but we want to see the uncompressed index values. */ size_t pos = 0; if (nlz77points > 0) { for (i = 0; i < llsize; i++) { size_t length = dists[i] == 0 ? 1 : litlens[i]; if (lz77splitpoints[npoints] == i) { ZOPFLI_APPEND_DATA(pos, &splitpoints, &npoints); if (npoints == nlz77points) break; } pos += length; } } assert(npoints == nlz77points); fprintf(stderr, "block split points: "); for (i = 0; i < npoints; i++) { fprintf(stderr, "%d ", (int)splitpoints[i]); } fprintf(stderr, "(hex:"); for (i = 0; i < npoints; i++) { fprintf(stderr, " %x", (int)splitpoints[i]); } fprintf(stderr, ")\n"); free(splitpoints); } /* Finds next block to try to split, the largest of the available ones. The largest is chosen to make sure that if only a limited amount of blocks is requested, their sizes are spread evenly. llsize: the size of the LL77 data, which is the size of the done array here. done: array indicating which blocks starting at that position are no longer splittable (splitting them increases rather than decreases cost). splitpoints: the splitpoints found so far. npoints: the amount of splitpoints found so far. lstart: output variable, giving start of block. lend: output variable, giving end of block. returns 1 if a block was found, 0 if no block found (all are done). */ static int FindLargestSplittableBlock( size_t llsize, const unsigned char* done, const size_t* splitpoints, size_t npoints, size_t* lstart, size_t* lend) { size_t longest = 0; int found = 0; size_t i; for (i = 0; i <= npoints; i++) { size_t start = i == 0 ? 0 : splitpoints[i - 1]; size_t end = i == npoints ? llsize - 1 : splitpoints[i]; if (!done[start] && end - start > longest) { *lstart = start; *lend = end; found = 1; longest = end - start; } } return found; } void ZopfliBlockSplitLZ77(const ZopfliOptions* options, const unsigned short* litlens, const unsigned short* dists, size_t llsize, size_t maxblocks, size_t** splitpoints, size_t* npoints) { size_t lstart, lend; size_t i; size_t llpos = 0; size_t numblocks = 1; unsigned char* done; double splitcost, origcost; if (llsize < 10) return; /* This code fails on tiny files. */ done = (unsigned char*)malloc(llsize); if (!done) exit(-1); /* Allocation failed. */ for (i = 0; i < llsize; i++) done[i] = 0; lstart = 0; lend = llsize; for (;;) { SplitCostContext c; if (maxblocks > 0 && numblocks >= maxblocks) { break; } c.litlens = litlens; c.dists = dists; c.llsize = llsize; c.start = lstart; c.end = lend; assert(lstart < lend); llpos = FindMinimum(SplitCost, &c, lstart + 1, lend); assert(llpos > lstart); assert(llpos < lend); splitcost = EstimateCost(litlens, dists, lstart, llpos) + EstimateCost(litlens, dists, llpos, lend); origcost = EstimateCost(litlens, dists, lstart, lend); if (splitcost > origcost || llpos == lstart + 1 || llpos == lend) { done[lstart] = 1; } else { AddSorted(llpos, splitpoints, npoints); numblocks++; } if (!FindLargestSplittableBlock( llsize, done, *splitpoints, *npoints, &lstart, &lend)) { break; /* No further split will probably reduce compression. */ } if (lend - lstart < 10) { break; } } if (options->verbose) { PrintBlockSplitPoints(litlens, dists, llsize, *splitpoints, *npoints); } free(done); } void ZopfliBlockSplit(const ZopfliOptions* options, const unsigned char* in, size_t instart, size_t inend, size_t maxblocks, size_t** splitpoints, size_t* npoints) { size_t pos = 0; size_t i; ZopfliBlockState s; size_t* lz77splitpoints = 0; size_t nlz77points = 0; ZopfliLZ77Store store; ZopfliInitLZ77Store(&store); s.options = options; s.blockstart = instart; s.blockend = inend; #ifdef ZOPFLI_LONGEST_MATCH_CACHE s.lmc = 0; #endif *npoints = 0; *splitpoints = 0; /* Unintuitively, Using a simple LZ77 method here instead of ZopfliLZ77Optimal results in better blocks. */ ZopfliLZ77Greedy(&s, in, instart, inend, &store); ZopfliBlockSplitLZ77(options, store.litlens, store.dists, store.size, maxblocks, &lz77splitpoints, &nlz77points); /* Convert LZ77 positions to positions in the uncompressed input. */ pos = instart; if (nlz77points > 0) { for (i = 0; i < store.size; i++) { size_t length = store.dists[i] == 0 ? 1 : store.litlens[i]; if (lz77splitpoints[*npoints] == i) { ZOPFLI_APPEND_DATA(pos, splitpoints, npoints); if (*npoints == nlz77points) break; } pos += length; } } assert(*npoints == nlz77points); free(lz77splitpoints); ZopfliCleanLZ77Store(&store); } void ZopfliBlockSplitSimple(const unsigned char* in, size_t instart, size_t inend, size_t blocksize, size_t** splitpoints, size_t* npoints) { size_t i = instart; while (i < inend) { ZOPFLI_APPEND_DATA(i, splitpoints, npoints); i += blocksize; } (void)in; }