-- Hoogle documentation, generated by Haddock -- See Hoogle, http://www.haskell.org/hoogle/ -- | Low-level networking interface -- -- This package provides a low-level networking interface. -- -- In network-2.6 the Network.URI module was split off into its -- own package, network-uri-2.6. If you're using the Network.URI -- module you can automatically get it from the right package by adding -- this to your .cabal file: -- -- 
--   flag network-uri
--     description: Get Network.URI from the network-uri package
--     default: True
--   
--   library
--     -- ...
--     if flag(network-uri)
--       build-depends: network-uri >= 2.6
--     else
--       build-depends: network < 2.6
--
-- -- If you want to use other modules from the network package while using -- the Network.URI modules from the network-uri package, add a -- network > 2.6 clause to the first build-depends -- line. @package network @version 2.6.0.1 -- | A module containing semi-public Socket internals. Modules which -- extend the Socket module will need to use this module while -- ideally most users will be able to make do with the public interface. module Network.Socket.Internal -- | Network byte order. type HostAddress = Word32 -- | Host byte order. type HostAddress6 = (Word32, Word32, Word32, Word32) type FlowInfo = Word32 type ScopeID = Word32 newtype PortNumber PortNum :: Word16 -> PortNumber data SockAddr SockAddrInet :: PortNumber -> HostAddress -> SockAddr SockAddrInet6 :: PortNumber -> FlowInfo -> HostAddress6 -> ScopeID -> SockAddr SockAddrUnix :: String -> SockAddr -- | Read a SockAddr from the given memory location. peekSockAddr :: Ptr SockAddr -> IO SockAddr -- | Write the given SockAddr to the given memory location. pokeSockAddr :: Ptr a -> SockAddr -> IO () -- | Computes the storage requirements (in bytes) of the given -- SockAddr. This function differs from sizeOf in that the -- value of the argument is used. sizeOfSockAddr :: SockAddr -> Int -- | Computes the storage requirements (in bytes) required for a -- SockAddr with the given Family. sizeOfSockAddrByFamily :: Family -> Int -- | Use a SockAddr with a function requiring a pointer to a -- SockAddr and the length of that SockAddr. withSockAddr :: SockAddr -> (Ptr SockAddr -> Int -> IO a) -> IO a -- | Create a new SockAddr for use with a function requiring a -- pointer to a SockAddr and the length of that SockAddr. withNewSockAddr :: Family -> (Ptr SockAddr -> Int -> IO a) -> IO a -- | Address families. -- -- A constructor being present here does not mean it is supported by the -- operating system: see isSupportedFamily. data Family AF_UNSPEC :: Family AF_UNIX :: Family AF_INET :: Family AF_INET6 :: Family AF_IMPLINK :: Family AF_PUP :: Family AF_CHAOS :: Family AF_NS :: Family AF_NBS :: Family AF_ECMA :: Family AF_DATAKIT :: Family AF_CCITT :: Family AF_SNA :: Family AF_DECnet :: Family AF_DLI :: Family AF_LAT :: Family AF_HYLINK :: Family AF_APPLETALK :: Family AF_ROUTE :: Family AF_NETBIOS :: Family AF_NIT :: Family AF_802 :: Family AF_ISO :: Family AF_OSI :: Family AF_NETMAN :: Family AF_X25 :: Family AF_AX25 :: Family AF_OSINET :: Family AF_GOSSIP :: Family AF_IPX :: Family Pseudo_AF_XTP :: Family AF_CTF :: Family AF_WAN :: Family AF_SDL :: Family AF_NETWARE :: Family AF_NDD :: Family AF_INTF :: Family AF_COIP :: Family AF_CNT :: Family Pseudo_AF_RTIP :: Family Pseudo_AF_PIP :: Family AF_SIP :: Family AF_ISDN :: Family Pseudo_AF_KEY :: Family AF_NATM :: Family AF_ARP :: Family Pseudo_AF_HDRCMPLT :: Family AF_ENCAP :: Family AF_LINK :: Family AF_RAW :: Family AF_RIF :: Family AF_NETROM :: Family AF_BRIDGE :: Family AF_ATMPVC :: Family AF_ROSE :: Family AF_NETBEUI :: Family AF_SECURITY :: Family AF_PACKET :: Family AF_ASH :: Family AF_ECONET :: Family AF_ATMSVC :: Family AF_IRDA :: Family AF_PPPOX :: Family AF_WANPIPE :: Family AF_BLUETOOTH :: Family -- | Throw an IOError corresponding to the current socket error. throwSocketError :: String -> IO a -- | Like throwSocketError, but the error code is supplied as an -- argument. -- -- On Windows, do not use errno. Use a system error code instead. throwSocketErrorCode :: String -> CInt -> IO a -- | Throw an IOError corresponding to the current socket error if -- the IO action returns a result of -1. Discards the result of -- the IO action after error handling. throwSocketErrorIfMinus1_ :: (Eq a, Num a) => String -> IO a -> IO () -- | Throw an IOError corresponding to the current socket error if -- the IO action returns a result of -1, but retries in case of -- an interrupted operation. throwSocketErrorIfMinus1Retry :: (Eq a, Num a) => String -> IO a -> IO a -- | Throw an IOError corresponding to the current socket error if -- the IO action returns a result of -1, but retries in case of -- an interrupted operation. Discards the result of the IO action after -- error handling. throwSocketErrorIfMinus1Retry_ :: (Eq a, Num a) => String -> IO a -> IO () -- | Throw an IOError corresponding to the current socket error if -- the IO action returns a result of -1, but retries in case of -- an interrupted operation. Checks for operations that would block and -- executes an alternative action before retrying in that case. throwSocketErrorIfMinus1RetryMayBlock :: (Eq a, Num a) => String -> IO b -> IO a -> IO a -- | Like throwSocketErrorIfMinus1Retry, but if the action fails -- with EWOULDBLOCK or similar, wait for the socket to be -- read-ready, and try again. throwSocketErrorWaitRead :: (Eq a, Num a) => Socket -> String -> IO a -> IO a -- | Like throwSocketErrorIfMinus1Retry, but if the action fails -- with EWOULDBLOCK or similar, wait for the socket to be -- write-ready, and try again. throwSocketErrorWaitWrite :: (Eq a, Num a) => Socket -> String -> IO a -> IO a -- | On Windows operating systems, the networking subsystem has to be -- initialised using withSocketsDo before any networking -- operations can be used. eg. -- -- 
--   main = withSocketsDo $ do {...}
--
-- -- Although this is only strictly necessary on Windows platforms, it is -- harmless on other platforms, so for portability it is good practice to -- use it all the time. withSocketsDo :: IO a -> IO a -- | Zero a structure. zeroMemory :: Ptr a -> CSize -> IO () -- | The Network.Socket module is for when you want full control -- over sockets. Essentially the entire C socket API is exposed through -- this module; in general the operations follow the behaviour of the C -- functions of the same name (consult your favourite Unix networking -- book). -- -- A higher level interface to networking operations is provided through -- the module Network. module Network.Socket data Socket MkSocket :: CInt -> Family -> SocketType -> ProtocolNumber -> (MVar SocketStatus) -> Socket -- | Address families. -- -- A constructor being present here does not mean it is supported by the -- operating system: see isSupportedFamily. data Family AF_UNSPEC :: Family AF_UNIX :: Family AF_INET :: Family AF_INET6 :: Family AF_IMPLINK :: Family AF_PUP :: Family AF_CHAOS :: Family AF_NS :: Family AF_NBS :: Family AF_ECMA :: Family AF_DATAKIT :: Family AF_CCITT :: Family AF_SNA :: Family AF_DECnet :: Family AF_DLI :: Family AF_LAT :: Family AF_HYLINK :: Family AF_APPLETALK :: Family AF_ROUTE :: Family AF_NETBIOS :: Family AF_NIT :: Family AF_802 :: Family AF_ISO :: Family AF_OSI :: Family AF_NETMAN :: Family AF_X25 :: Family AF_AX25 :: Family AF_OSINET :: Family AF_GOSSIP :: Family AF_IPX :: Family Pseudo_AF_XTP :: Family AF_CTF :: Family AF_WAN :: Family AF_SDL :: Family AF_NETWARE :: Family AF_NDD :: Family AF_INTF :: Family AF_COIP :: Family AF_CNT :: Family Pseudo_AF_RTIP :: Family Pseudo_AF_PIP :: Family AF_SIP :: Family AF_ISDN :: Family Pseudo_AF_KEY :: Family AF_NATM :: Family AF_ARP :: Family Pseudo_AF_HDRCMPLT :: Family AF_ENCAP :: Family AF_LINK :: Family AF_RAW :: Family AF_RIF :: Family AF_NETROM :: Family AF_BRIDGE :: Family AF_ATMPVC :: Family AF_ROSE :: Family AF_NETBEUI :: Family AF_SECURITY :: Family AF_PACKET :: Family AF_ASH :: Family AF_ECONET :: Family AF_ATMSVC :: Family AF_IRDA :: Family AF_PPPOX :: Family AF_WANPIPE :: Family AF_BLUETOOTH :: Family -- | Does the AF_ constant corresponding to the given family exist on this -- system? isSupportedFamily :: Family -> Bool -- | Socket Types. -- -- The existence of a constructor does not necessarily imply that that -- socket type is supported on your system: see -- isSupportedSocketType. data SocketType -- | 0, used in getAddrInfo hints, for example NoSocketType :: SocketType -- | SOCK_STREAM Stream :: SocketType -- | SOCK_DGRAM Datagram :: SocketType -- | SOCK_RAW Raw :: SocketType -- | SOCK_RDM RDM :: SocketType -- | SOCK_SEQPACKET SeqPacket :: SocketType -- | Does the SOCK_ constant corresponding to the given SocketType exist on -- this system? isSupportedSocketType :: SocketType -> Bool data SockAddr SockAddrInet :: PortNumber -> HostAddress -> SockAddr SockAddrInet6 :: PortNumber -> FlowInfo -> HostAddress6 -> ScopeID -> SockAddr SockAddrUnix :: String -> SockAddr -- | The status of the socket as determined by this library, not -- necessarily reflecting the state of the connection itself. -- -- For example, the Closed status is applied when the -- close function is called. data SocketStatus -- | Newly created, unconnected socket NotConnected :: SocketStatus -- | Bound, via bind Bound :: SocketStatus -- | Listening, via listen Listening :: SocketStatus -- | Connected or accepted, via connect or accept Connected :: SocketStatus -- | Is now a Handle (via socketToHandle), don't touch ConvertedToHandle :: SocketStatus -- | Closed was closed by close Closed :: SocketStatus -- | Network byte order. type HostAddress = Word32 -- | Host byte order. type HostAddress6 = (Word32, Word32, Word32, Word32) type FlowInfo = Word32 type ScopeID = Word32 data ShutdownCmd ShutdownReceive :: ShutdownCmd ShutdownSend :: ShutdownCmd ShutdownBoth :: ShutdownCmd type ProtocolNumber = CInt -- | This is the default protocol for a given service. defaultProtocol :: ProtocolNumber newtype PortNumber PortNum :: Word16 -> PortNumber -- | Either a host name e.g., "haskell.org" or a numeric host -- address string consisting of a dotted decimal IPv4 address or an IPv6 -- address e.g., "192.168.0.1". type HostName = String type ServiceName = String data AddrInfo AddrInfo :: [AddrInfoFlag] -> Family -> SocketType -> ProtocolNumber -> SockAddr -> Maybe String -> AddrInfo addrFlags :: AddrInfo -> [AddrInfoFlag] addrFamily :: AddrInfo -> Family addrSocketType :: AddrInfo -> SocketType addrProtocol :: AddrInfo -> ProtocolNumber addrAddress :: AddrInfo -> SockAddr addrCanonName :: AddrInfo -> Maybe String -- | Flags that control the querying behaviour of getAddrInfo. data AddrInfoFlag AI_ADDRCONFIG :: AddrInfoFlag AI_ALL :: AddrInfoFlag AI_CANONNAME :: AddrInfoFlag AI_NUMERICHOST :: AddrInfoFlag AI_NUMERICSERV :: AddrInfoFlag AI_PASSIVE :: AddrInfoFlag AI_V4MAPPED :: AddrInfoFlag -- | Indicate whether the given AddrInfoFlag will have any effect on -- this system. addrInfoFlagImplemented :: AddrInfoFlag -> Bool -- | Default hints for address lookup with getAddrInfo. The values -- of the addrAddress and addrCanonName fields are -- undefined, and are never inspected by getAddrInfo. defaultHints :: AddrInfo -- | Resolve a host or service name to one or more addresses. The -- AddrInfo values that this function returns contain -- SockAddr values that you can pass directly to connect or -- bind. -- -- This function is protocol independent. It can return both IPv4 and -- IPv6 address information. -- -- The AddrInfo argument specifies the preferred query behaviour, -- socket options, or protocol. You can override these conveniently using -- Haskell's record update syntax on defaultHints, for example as -- follows: -- -- 
--   myHints = defaultHints { addrFlags = [AI_ADDRCONFIG, AI_CANONNAME] }
--
-- -- Values for addrFlags control query behaviour. The supported -- flags are as follows: -- -- -- -- Note: Although the following flags are required by RFC 3493, -- they may not have an effect on all platforms, because the underlying -- network stack may not support them. To see whether a flag from the -- list below will have any effect, call addrInfoFlagImplemented. -- -- -- -- You must provide a Just value for at least one of the -- HostName or ServiceName arguments. HostName can -- be either a numeric network address (dotted quad for IPv4, -- colon-separated hex for IPv6) or a hostname. In the latter case, its -- addresses will be looked up unless AI_NUMERICHOST is specified -- as a hint. If you do not provide a HostName value and do -- not set AI_PASSIVE as a hint, network addresses in the result -- will contain the address of the loopback interface. -- -- If the query fails, this function throws an IO exception instead of -- returning an empty list. Otherwise, it returns a non-empty list of -- AddrInfo values. -- -- There are several reasons why a query might result in several values. -- For example, the queried-for host could be multihomed, or the service -- might be available via several protocols. -- -- Note: the order of arguments is slightly different to that defined for -- getaddrinfo in RFC 2553. The AddrInfo parameter comes -- first to make partial application easier. -- -- Example: let hints = defaultHints { addrFlags = [AI_ADDRCONFIG, -- AI_CANONNAME] } addrs <- getAddrInfo (Just hints) (Just -- www.haskell.org) (Just http) let addr = head addrs sock -- <- socket (addrFamily addr) (addrSocketType addr) (addrProtocol -- addr) connect sock (addrAddress addr) getAddrInfo :: Maybe AddrInfo -> Maybe HostName -> Maybe ServiceName -> IO [AddrInfo] data NameInfoFlag NI_DGRAM :: NameInfoFlag NI_NAMEREQD :: NameInfoFlag NI_NOFQDN :: NameInfoFlag NI_NUMERICHOST :: NameInfoFlag NI_NUMERICSERV :: NameInfoFlag -- | Resolve an address to a host or service name. This function is -- protocol independent. -- -- The list of NameInfoFlag values controls query behaviour. The -- supported flags are as follows: -- -- -- -- Hostname and service name lookups can be expensive. You can specify -- which lookups to perform via the two Bool arguments. If one of -- these is False, the corresponding value in the returned tuple -- will be Nothing, and no lookup will be performed. -- -- If a host or service's name cannot be looked up, then the numeric form -- of the address or service will be returned. -- -- If the query fails, this function throws an IO exception. -- -- Example: (hostName, _) <- getNameInfo [] True False myAddress -- getNameInfo :: [NameInfoFlag] -> Bool -> Bool -> SockAddr -> IO (Maybe HostName, Maybe ServiceName) -- | Create a new socket using the given address family, socket type and -- protocol number. The address family is usually AF_INET, -- AF_INET6, or AF_UNIX. The socket type is usually -- Stream or Datagram. The protocol number is usually -- defaultProtocol. If AF_INET6 is used, the -- IPv6Only socket option is set to 0 so that both IPv4 and IPv6 -- can be handled with one socket. socket :: Family -> SocketType -> ProtocolNumber -> IO Socket -- | Build a pair of connected socket objects using the given address -- family, socket type, and protocol number. Address family, socket type, -- and protocol number are as for the socket function above. -- Availability: Unix. socketPair :: Family -> SocketType -> ProtocolNumber -> IO (Socket, Socket) -- | Connect to a remote socket at address. connect :: Socket -> SockAddr -> IO () -- | Bind the socket to an address. The socket must not already be bound. -- The Family passed to bind must be the same as that -- passed to socket. If the special port number aNY_PORT is -- passed then the system assigns the next available use port. bind :: Socket -> SockAddr -> IO () -- | Listen for connections made to the socket. The second argument -- specifies the maximum number of queued connections and should be at -- least 1; the maximum value is system-dependent (usually 5). listen :: Socket -> Int -> IO () -- | Accept a connection. The socket must be bound to an address and -- listening for connections. The return value is a pair (conn, -- address) where conn is a new socket object usable to -- send and receive data on the connection, and address is the -- address bound to the socket on the other end of the connection. accept :: Socket -> IO (Socket, SockAddr) getPeerName :: Socket -> IO SockAddr getSocketName :: Socket -> IO SockAddr -- | Returns the processID, userID and groupID of the socket's peer. -- -- Only available on platforms that support SO_PEERCRED or GETPEEREID(3) -- on domain sockets. GETPEEREID(3) returns userID and groupID. processID -- is always 0. getPeerCred :: Socket -> IO (CUInt, CUInt, CUInt) socketPort :: Socket -> IO PortNumber -- | Turns a Socket into an Handle. By default, the new handle is -- unbuffered. Use hSetBuffering to change the buffering. -- -- Note that since a Handle is automatically closed by a finalizer -- when it is no longer referenced, you should avoid doing any more -- operations on the Socket after calling socketToHandle. -- To close the Socket after socketToHandle, call -- hClose on the Handle. socketToHandle :: Socket -> IOMode -> IO Handle -- | Send data to the socket. The recipient can be specified explicitly, so -- the socket need not be in a connected state. Returns the number of -- bytes sent. Applications are responsible for ensuring that all data -- has been sent. -- -- NOTE: blocking on Windows unless you compile with -threaded (see GHC -- ticket #1129) sendTo :: Socket -> String -> SockAddr -> IO Int -- | Send data to the socket. The recipient can be specified explicitly, so -- the socket need not be in a connected state. Returns the number of -- bytes sent. Applications are responsible for ensuring that all data -- has been sent. sendBufTo :: Socket -> Ptr a -> Int -> SockAddr -> IO Int -- | Receive data from the socket. The socket need not be in a connected -- state. Returns (bytes, nbytes, address) where bytes -- is a String of length nbytes representing the data -- received and address is a SockAddr representing the -- address of the sending socket. -- -- NOTE: blocking on Windows unless you compile with -threaded (see GHC -- ticket #1129) recvFrom :: Socket -> Int -> IO (String, Int, SockAddr) -- | Receive data from the socket, writing it into buffer instead of -- creating a new string. The socket need not be in a connected state. -- Returns (nbytes, address) where nbytes is the number -- of bytes received and address is a SockAddr -- representing the address of the sending socket. -- -- NOTE: blocking on Windows unless you compile with -threaded (see GHC -- ticket #1129) recvBufFrom :: Socket -> Ptr a -> Int -> IO (Int, SockAddr) -- | Send data to the socket. The socket must be connected to a remote -- socket. Returns the number of bytes sent. Applications are responsible -- for ensuring that all data has been sent. send :: Socket -> String -> IO Int -- | Receive data from the socket. The socket must be in a connected state. -- This function may return fewer bytes than specified. If the message is -- longer than the specified length, it may be discarded depending on the -- type of socket. This function may block until a message arrives. -- -- Considering hardware and network realities, the maximum number of -- bytes to receive should be a small power of 2, e.g., 4096. -- -- For TCP sockets, a zero length return value means the peer has closed -- its half side of the connection. recv :: Socket -> Int -> IO String recvLen :: Socket -> Int -> IO (String, Int) -- | Send data to the socket. The socket must be connected to a remote -- socket. Returns the number of bytes sent. Applications are responsible -- for ensuring that all data has been sent. sendBuf :: Socket -> Ptr Word8 -> Int -> IO Int -- | Receive data from the socket. The socket must be in a connected state. -- This function may return fewer bytes than specified. If the message is -- longer than the specified length, it may be discarded depending on the -- type of socket. This function may block until a message arrives. -- -- Considering hardware and network realities, the maximum number of -- bytes to receive should be a small power of 2, e.g., 4096. -- -- For TCP sockets, a zero length return value means the peer has closed -- its half side of the connection. recvBuf :: Socket -> Ptr Word8 -> Int -> IO Int inet_addr :: String -> IO HostAddress inet_ntoa :: HostAddress -> IO String -- | Shut down one or both halves of the connection, depending on the -- second argument to the function. If the second argument is -- ShutdownReceive, further receives are disallowed. If it is -- ShutdownSend, further sends are disallowed. If it is -- ShutdownBoth, further sends and receives are disallowed. shutdown :: Socket -> ShutdownCmd -> IO () -- | Close the socket. All future operations on the socket object will -- fail. The remote end will receive no more data (after queued data is -- flushed). close :: Socket -> IO () -- | Determines whether close has been used on the Socket. -- This does not indicate any status about the socket beyond this. -- If the socket has been closed remotely, this function can still return -- True. isConnected :: Socket -> IO Bool isBound :: Socket -> IO Bool isListening :: Socket -> IO Bool isReadable :: Socket -> IO Bool isWritable :: Socket -> IO Bool -- | Socket options for use with setSocketOption and -- getSocketOption. -- -- The existence of a constructor does not imply that the relevant option -- is supported on your system: see isSupportedSocketOption data SocketOption -- | SO_DEBUG Debug :: SocketOption -- | SO_REUSEADDR ReuseAddr :: SocketOption -- | SO_TYPE Type :: SocketOption -- | SO_ERROR SoError :: SocketOption -- | SO_DONTROUTE DontRoute :: SocketOption -- | SO_BROADCAST Broadcast :: SocketOption -- | SO_SNDBUF SendBuffer :: SocketOption -- | SO_RCVBUF RecvBuffer :: SocketOption -- | SO_KEEPALIVE KeepAlive :: SocketOption -- | SO_OOBINLINE OOBInline :: SocketOption -- | IP_TTL TimeToLive :: SocketOption -- | TCP_MAXSEG MaxSegment :: SocketOption -- | TCP_NODELAY NoDelay :: SocketOption -- | TCP_CORK Cork :: SocketOption -- | SO_LINGER Linger :: SocketOption -- | SO_REUSEPORT ReusePort :: SocketOption -- | SO_RCVLOWAT RecvLowWater :: SocketOption -- | SO_SNDLOWAT SendLowWater :: SocketOption -- | SO_RCVTIMEO RecvTimeOut :: SocketOption -- | SO_SNDTIMEO SendTimeOut :: SocketOption -- | SO_USELOOPBACK UseLoopBack :: SocketOption -- | IPV6_V6ONLY IPv6Only :: SocketOption CustomSockOpt :: (CInt, CInt) -> SocketOption -- | Does the SocketOption exist on this system? isSupportedSocketOption :: SocketOption -> Bool -- | Get a socket option that gives an Int value. There is currently no API -- to get e.g. the timeval socket options getSocketOption :: Socket -> SocketOption -> IO Int -- | Set a socket option that expects an Int value. There is currently no -- API to set e.g. the timeval socket options setSocketOption :: Socket -> SocketOption -> Int -> IO () sendFd :: Socket -> CInt -> IO () recvFd :: Socket -> IO CInt aNY_PORT :: PortNumber -- | The IPv4 wild card address. iNADDR_ANY :: HostAddress -- | The IPv6 wild card address. iN6ADDR_ANY :: HostAddress6 sOMAXCONN :: Int sOL_SOCKET :: Int sCM_RIGHTS :: Int -- | This is the value of SOMAXCONN, typically 128. 128 is good enough for -- normal network servers but is too small for high performance servers. maxListenQueue :: Int -- | On Windows operating systems, the networking subsystem has to be -- initialised using withSocketsDo before any networking -- operations can be used. eg. -- -- 
--   main = withSocketsDo $ do {...}
--
-- -- Although this is only strictly necessary on Windows platforms, it is -- harmless on other platforms, so for portability it is good practice to -- use it all the time. withSocketsDo :: IO a -> IO a fdSocket :: Socket -> CInt mkSocket :: CInt -> Family -> SocketType -> ProtocolNumber -> SocketStatus -> IO Socket -- | Deprecated alias for bind. bindSocket :: Socket -> SockAddr -> IO () -- | Deprecated alias for close. sClose :: Socket -> IO () -- | Deprecated alias for isConnected. sIsConnected :: Socket -> IO Bool -- | Deprecated alias for isBound. sIsBound :: Socket -> IO Bool -- | Deprecated alias for isListening. sIsListening :: Socket -> IO Bool -- | Deprecated alias for isReadable. sIsReadable :: Socket -> IO Bool -- | Deprecated alias for isWritable. sIsWritable :: Socket -> IO Bool packFamily :: Family -> CInt unpackFamily :: CInt -> Family packSocketType :: SocketType -> CInt instance Typeable SocketOption instance Typeable ShutdownCmd instance Typeable AddrInfoFlag instance Typeable AddrInfo instance Typeable NameInfoFlag instance Show SocketOption instance Eq AddrInfoFlag instance Read AddrInfoFlag instance Show AddrInfoFlag instance Eq AddrInfo instance Show AddrInfo instance Eq NameInfoFlag instance Read NameInfoFlag instance Show NameInfoFlag instance Storable AddrInfo instance Show SockAddr -- | This module provides access to the BSD socket interface. This -- module is generally more efficient than the String based -- network functions in Socket. For detailed documentation, -- consult your favorite POSIX socket reference. All functions -- communicate failures by converting the error number to IOError. -- -- This module is made to be imported with Socket like so: -- -- 
--   import Network.Socket hiding (send, sendTo, recv, recvFrom)
--   import Network.Socket.ByteString
--
module Network.Socket.ByteString -- | Send data to the socket. The socket must be connected to a remote -- socket. Returns the number of bytes sent. Applications are responsible -- for ensuring that all data has been sent. send :: Socket -> ByteString -> IO Int -- | Send data to the socket. The socket must be connected to a remote -- socket. Unlike send, this function continues to send data until -- either all data has been sent or an error occurs. On error, an -- exception is raised, and there is no way to determine how much data, -- if any, was successfully sent. sendAll :: Socket -> ByteString -> IO () -- | Send data to the socket. The recipient can be specified explicitly, so -- the socket need not be in a connected state. Returns the number of -- bytes sent. Applications are responsible for ensuring that all data -- has been sent. sendTo :: Socket -> ByteString -> SockAddr -> IO Int -- | Send data to the socket. The recipient can be specified explicitly, so -- the socket need not be in a connected state. Unlike sendTo, -- this function continues to send data until either all data has been -- sent or an error occurs. On error, an exception is raised, and there -- is no way to determine how much data, if any, was successfully sent. sendAllTo :: Socket -> ByteString -> SockAddr -> IO () -- | Send data to the socket. The socket must be in a connected state. The -- data is sent as if the parts have been concatenated. This function -- continues to send data until either all data has been sent or an error -- occurs. On error, an exception is raised, and there is no way to -- determine how much data, if any, was successfully sent. sendMany :: Socket -> [ByteString] -> IO () -- | Send data to the socket. The recipient can be specified explicitly, so -- the socket need not be in a connected state. The data is sent as if -- the parts have been concatenated. This function continues to send data -- until either all data has been sent or an error occurs. On error, an -- exception is raised, and there is no way to determine how much data, -- if any, was successfully sent. sendManyTo :: Socket -> [ByteString] -> SockAddr -> IO () -- | Receive data from the socket. The socket must be in a connected state. -- This function may return fewer bytes than specified. If the message is -- longer than the specified length, it may be discarded depending on the -- type of socket. This function may block until a message arrives. -- -- Considering hardware and network realities, the maximum number of -- bytes to receive should be a small power of 2, e.g., 4096. -- -- For TCP sockets, a zero length return value means the peer has closed -- its half side of the connection. recv :: Socket -> Int -> IO ByteString -- | Receive data from the socket. The socket need not be in a connected -- state. Returns (bytes, address) where bytes is a -- ByteString representing the data received and address -- is a SockAddr representing the address of the sending socket. recvFrom :: Socket -> Int -> IO (ByteString, SockAddr) -- | This module provides access to the BSD socket interface. This -- module is generally more efficient than the String based -- network functions in Socket. For detailed documentation, -- consult your favorite POSIX socket reference. All functions -- communicate failures by converting the error number to IOError. -- -- This module is made to be imported with Socket like so: -- -- 
--   import Network.Socket hiding (send, sendTo, recv, recvFrom)
--   import Network.Socket.ByteString.Lazy
--   import Prelude hiding (getContents)
--
module Network.Socket.ByteString.Lazy -- | Send data to the socket. The socket must be in a connected state. -- Returns the number of bytes sent. Applications are responsible for -- ensuring that all data has been sent. -- -- Because a lazily generated ByteString may be arbitrarily long, -- this function caps the amount it will attempt to send at 4MB. This -- number is large (so it should not penalize performance on fast -- networks), but not outrageously so (to avoid demanding lazily computed -- data unnecessarily early). Before being sent, the lazy -- ByteString will be converted to a list of strict -- ByteStrings with toChunks; at most 1024 chunks will be -- sent. Unix only. send :: Socket -> ByteString -> IO Int64 -- | Send data to the socket. The socket must be in a connected state. This -- function continues to send data until either all data has been sent or -- an error occurs. If there is an error, an exception is raised, and -- there is no way to determine how much data was sent. Unix only. sendAll :: Socket -> ByteString -> IO () -- | Receive data from the socket. The socket must be in a connected state. -- Data is received on demand, in chunks; each chunk will be sized to -- reflect the amount of data received by individual recv calls. -- -- All remaining data from the socket is consumed. When there is no more -- data to be received, the receiving side of the socket is shut down. If -- there is an error and an exception is thrown, the socket is not shut -- down. getContents :: Socket -> IO ByteString -- | Receive data from the socket. The socket must be in a connected state. -- This function may return fewer bytes than specified. If the received -- data is longer than the specified length, it may be discarded -- depending on the type of socket. This function may block until a -- message arrives. -- -- If there is no more data to be received, returns an empty -- ByteString. recv :: Socket -> Int64 -> IO ByteString -- | The Network.BSD module defines Haskell bindings to network -- programming functionality provided by BSD Unix derivatives. module Network.BSD -- | Either a host name e.g., "haskell.org" or a numeric host -- address string consisting of a dotted decimal IPv4 address or an IPv6 -- address e.g., "192.168.0.1". type HostName = String -- | Calling getHostName returns the standard host name for the current -- processor, as set at boot time. getHostName :: IO HostName data HostEntry HostEntry :: HostName -> [HostName] -> Family -> [HostAddress] -> HostEntry hostName :: HostEntry -> HostName hostAliases :: HostEntry -> [HostName] hostFamily :: HostEntry -> Family hostAddresses :: HostEntry -> [HostAddress] -- | Resolve a HostName to IPv4 address. getHostByName :: HostName -> IO HostEntry -- | Get a HostEntry corresponding to the given address and family. -- Note that only IPv4 is currently supported. getHostByAddr :: Family -> HostAddress -> IO HostEntry hostAddress :: HostEntry -> HostAddress getHostEntries :: Bool -> IO [HostEntry] setHostEntry :: Bool -> IO () getHostEntry :: IO HostEntry endHostEntry :: IO () data ServiceEntry ServiceEntry :: ServiceName -> [ServiceName] -> PortNumber -> ProtocolName -> ServiceEntry serviceName :: ServiceEntry -> ServiceName serviceAliases :: ServiceEntry -> [ServiceName] servicePort :: ServiceEntry -> PortNumber serviceProtocol :: ServiceEntry -> ProtocolName type ServiceName = String -- | Get service by name. getServiceByName :: ServiceName -> ProtocolName -> IO ServiceEntry -- | Get the service given a PortNumber and ProtocolName. getServiceByPort :: PortNumber -> ProtocolName -> IO ServiceEntry -- | Get the PortNumber corresponding to the ServiceName. getServicePortNumber :: ServiceName -> IO PortNumber getServiceEntries :: Bool -> IO [ServiceEntry] getServiceEntry :: IO ServiceEntry setServiceEntry :: Bool -> IO () endServiceEntry :: IO () type ProtocolName = String type ProtocolNumber = CInt data ProtocolEntry ProtocolEntry :: ProtocolName -> [ProtocolName] -> ProtocolNumber -> ProtocolEntry protoName :: ProtocolEntry -> ProtocolName protoAliases :: ProtocolEntry -> [ProtocolName] protoNumber :: ProtocolEntry -> ProtocolNumber getProtocolByName :: ProtocolName -> IO ProtocolEntry getProtocolByNumber :: ProtocolNumber -> IO ProtocolEntry getProtocolNumber :: ProtocolName -> IO ProtocolNumber -- | This is the default protocol for a given service. defaultProtocol :: ProtocolNumber getProtocolEntries :: Bool -> IO [ProtocolEntry] setProtocolEntry :: Bool -> IO () getProtocolEntry :: IO ProtocolEntry endProtocolEntry :: IO () data PortNumber type NetworkName = String type NetworkAddr = CULong data NetworkEntry NetworkEntry :: NetworkName -> [NetworkName] -> Family -> NetworkAddr -> NetworkEntry networkName :: NetworkEntry -> NetworkName networkAliases :: NetworkEntry -> [NetworkName] networkFamily :: NetworkEntry -> Family networkAddress :: NetworkEntry -> NetworkAddr getNetworkByName :: NetworkName -> IO NetworkEntry getNetworkByAddr :: NetworkAddr -> Family -> IO NetworkEntry -- | Get the list of network entries. getNetworkEntries :: Bool -> IO [NetworkEntry] -- | Open the network name database. The parameter specifies whether a -- connection is maintained open between various networkEntry calls setNetworkEntry :: Bool -> IO () getNetworkEntry :: IO NetworkEntry -- | Close the connection to the network name database. endNetworkEntry :: IO () instance Typeable ServiceEntry instance Typeable ProtocolEntry instance Typeable HostEntry instance Typeable NetworkEntry instance Show ServiceEntry instance Read ProtocolEntry instance Show ProtocolEntry instance Read HostEntry instance Show HostEntry instance Read NetworkEntry instance Show NetworkEntry instance Storable NetworkEntry instance Storable HostEntry instance Storable ProtocolEntry instance Storable ServiceEntry -- | This module is kept for backwards-compatibility. New users are -- encouraged to use Network.Socket instead. -- -- Network was intended as a "higher-level" interface to -- networking facilities, and only supports TCP. module Network data Socket data PortID Service :: String -> PortID PortNumber :: PortNumber -> PortID UnixSocket :: String -> PortID -- | Either a host name e.g., "haskell.org" or a numeric host -- address string consisting of a dotted decimal IPv4 address or an IPv6 -- address e.g., "192.168.0.1". type HostName = String data PortNumber -- | On Windows operating systems, the networking subsystem has to be -- initialised using withSocketsDo before any networking -- operations can be used. eg. -- -- 
--   main = withSocketsDo $ do {...}
--
-- -- Although this is only strictly necessary on Windows platforms, it is -- harmless on other platforms, so for portability it is good practice to -- use it all the time. withSocketsDo :: IO a -> IO a -- | Creates the server side socket which has been bound to the specified -- port. -- -- maxListenQueue (typically 128) is specified to the listen -- queue. This is good enough for normal network servers but is too small -- for high performance servers. -- -- To avoid the "Address already in use" problems, the ReuseAddr -- socket option is set on the listening socket. -- -- If available, the IPv6Only socket option is set to 0 so that -- both IPv4 and IPv6 can be accepted with this socket. -- -- If you don't like the behavior above, please use the lower level -- listen instead. listenOn :: PortID -> IO Socket -- | Accept a connection on a socket created by listenOn. Normal I/O -- operations (see System.IO) can be used on the Handle -- returned to communicate with the client. Notice that although you can -- pass any Socket to Network.accept, only sockets of either AF_UNIX, -- AF_INET, or AF_INET6 will work (this shouldn't be a problem, though). -- When using AF_UNIX, HostName will be set to the path of the socket and -- PortNumber to -1. accept :: Socket -> IO (Handle, HostName, PortNumber) -- | Close the socket. All future operations on the socket object will -- fail. The remote end will receive no more data (after queued data is -- flushed). sClose :: Socket -> IO () -- | Calling connectTo creates a client side socket which is -- connected to the given host and port. The Protocol and socket type is -- derived from the given port identifier. If a port number is given then -- the result is always an internet family Stream socket. connectTo :: HostName -> PortID -> IO Handle sendTo :: HostName -> PortID -> String -> IO () recvFrom :: HostName -> PortID -> IO String -- | Returns the PortID associated with a given socket. socketPort :: Socket -> IO PortID instance Show PortID instance Eq PortID