-- | -- Module : Path.IO -- Copyright : © 2016 Mark Karpov -- License : BSD 3 clause -- -- Maintainer : Mark Karpov -- Stability : experimental -- Portability : portable -- -- This module provides interface to "System.Directory" for users of "Path" -- module. It also implements commonly used primitives like recursive -- scanning and copying of directories. {-# LANGUAGE CPP #-} {-# LANGUAGE FlexibleInstances #-} {-# LANGUAGE TupleSections #-} {-# LANGUAGE TypeFamilies #-} module Path.IO ( -- * Actions on directories createDir , createDirIfMissing , ensureDir , removeDir , removeDirRecur , renameDir , listDir , listDirRecur , copyDirRecur -- ** Current working directory , getCurrentDir , setCurrentDir , withCurrentDir -- * Pre-defined directories , getHomeDir , getAppUserDataDir , getUserDocsDir , getTempDir -- * Path transformation , AbsPath , RelPath , AnyPath (..) , resolveFile , resolveFile' , resolveDir , resolveDir' -- * Actions on files , removeFile , renameFile , copyFile , findExecutable , findFile , findFiles , findFilesWith -- * Temporary files and directories , withTempFile , withTempDir , withSystemTempFile , withSystemTempDir , openTempFile , openBinaryTempFile , createTempDir -- * Existence tests , doesFileExist , doesDirExist , isLocationOccupied , forgivingAbsence , ignoringAbsence -- * Permissions , D.Permissions , D.emptyPermissions , D.readable , D.writable , D.executable , D.searchable , D.setOwnerReadable , D.setOwnerWritable , D.setOwnerExecutable , D.setOwnerSearchable , getPermissions , setPermissions , copyPermissions -- * Timestamps #if MIN_VERSION_directory(1,2,3) , getAccessTime , setAccessTime , setModificationTime #endif , getModificationTime ) where import Control.Monad import Control.Monad.Catch import Control.Monad.IO.Class (MonadIO (..)) import Data.Either (lefts, rights) import Data.Foldable (foldl') import Data.List ((\\)) import Data.Time (UTCTime) import Path import System.IO (Handle) import System.IO.Error (isDoesNotExistError) import qualified System.Directory as D import qualified System.FilePath as F import qualified System.IO.Temp as T #if !MIN_VERSION_base(4,8,0) import Data.Monoid (mappend) #endif ---------------------------------------------------------------------------- -- Actions on directories -- | @'createDir' dir@ creates a new directory @dir@ which is initially -- empty, or as near to empty as the operating system allows. -- -- The operation may fail with: -- -- * 'isPermissionError' \/ 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EROFS, EACCES]@ -- -- * 'isAlreadyExistsError' \/ 'AlreadyExists' -- The operand refers to a directory that already exists. -- @ [EEXIST]@ -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'InvalidArgument' -- The operand is not a valid directory name. -- @[ENAMETOOLONG, ELOOP]@ -- -- * 'NoSuchThing' -- There is no path to the directory. -- @[ENOENT, ENOTDIR]@ -- -- * 'ResourceExhausted' -- Insufficient resources (virtual memory, process file descriptors, -- physical disk space, etc.) are available to perform the operation. -- @[EDQUOT, ENOSPC, ENOMEM, EMLINK]@ -- -- * 'InappropriateType' -- The path refers to an existing non-directory object. -- @[EEXIST]@ createDir :: MonadIO m => Path b Dir -> m () createDir = liftD D.createDirectory -- | @'createDirIfMissing' parents dir@ creates a new directory @dir@ if it -- doesn\'t exist. If the first argument is 'True' the function will also -- create all parent directories if they are missing. createDirIfMissing :: MonadIO m => Bool -- ^ Create its parents too? -> Path b Dir -- ^ The path to the directory you want to make -> m () createDirIfMissing p = liftD (D.createDirectoryIfMissing p) -- | Ensure that directory exists creating it and its parent directories if -- necessary. This is just a handy shortcut: -- -- > ensureDir = createDirIfMissing True ensureDir :: MonadIO m => Path b Dir -> m () ensureDir = createDirIfMissing True -- | @'removeDir' dir@ removes an existing directory @dir@. The -- implementation may specify additional constraints which must be satisfied -- before a directory can be removed (e.g. the directory has to be empty, or -- may not be in use by other processes). It is not legal for an -- implementation to partially remove a directory unless the entire -- directory is removed. A conformant implementation need not support -- directory removal in all situations (e.g. removal of the root directory). -- -- The operation may fail with: -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'InvalidArgument' -- The operand is not a valid directory name. -- @[ENAMETOOLONG, ELOOP]@ -- -- * 'isDoesNotExistError' \/ 'NoSuchThing' -- The directory does not exist. -- @[ENOENT, ENOTDIR]@ -- -- * 'isPermissionError' \/ 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EROFS, EACCES, EPERM]@ -- -- * 'UnsatisfiedConstraints' -- Implementation-dependent constraints are not satisfied. -- @[EBUSY, ENOTEMPTY, EEXIST]@ -- -- * 'UnsupportedOperation' -- The implementation does not support removal in this situation. -- @[EINVAL]@ -- -- * 'InappropriateType' -- The operand refers to an existing non-directory object. -- @[ENOTDIR]@ removeDir :: MonadIO m => Path b Dir -> m () removeDir = liftD D.removeDirectory -- | @'removeDirRecur' dir@ removes an existing directory @dir@ together -- with its contents and subdirectories. Within this directory, symbolic -- links are removed without affecting their the targets. removeDirRecur :: MonadIO m => Path b Dir -> m () removeDirRecur = liftD D.removeDirectoryRecursive -- |@'renameDir' old new@ changes the name of an existing directory from -- @old@ to @new@. If the @new@ directory already exists, it is atomically -- replaced by the @old@ directory. If the @new@ directory is neither the -- @old@ directory nor an alias of the @old@ directory, it is removed as if -- by 'removeDir'. A conformant implementation need not support renaming -- directories in all situations (e.g. renaming to an existing directory, or -- across different physical devices), but the constraints must be -- documented. -- -- On Win32 platforms, @renameDir@ fails if the @new@ directory already -- exists. -- -- The operation may fail with: -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'InvalidArgument' -- Either operand is not a valid directory name. -- @[ENAMETOOLONG, ELOOP]@ -- -- * 'isDoesNotExistError' \/ 'NoSuchThing' -- The original directory does not exist, or there is no path to the target. -- @[ENOENT, ENOTDIR]@ -- -- * 'isPermissionError' \/ 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EROFS, EACCES, EPERM]@ -- -- * 'ResourceExhausted' -- Insufficient resources are available to perform the operation. -- @[EDQUOT, ENOSPC, ENOMEM, EMLINK]@ -- -- * 'UnsatisfiedConstraints' -- Implementation-dependent constraints are not satisfied. -- @[EBUSY, ENOTEMPTY, EEXIST]@ -- -- * 'UnsupportedOperation' -- The implementation does not support renaming in this situation. -- @[EINVAL, EXDEV]@ -- -- * 'InappropriateType' -- Either path refers to an existing non-directory object. -- @[ENOTDIR, EISDIR]@ renameDir :: MonadIO m => Path b0 Dir -- ^ Old name -> Path b1 Dir -- ^ New name -> m () renameDir = liftD2 D.renameDirectory -- | @'listDir' dir@ returns a list of /all/ entries in @dir@ without the -- special entries (@.@ and @..@). Entries are not sorted. -- -- The operation may fail with: -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'InvalidArgument' -- The operand is not a valid directory name. -- @[ENAMETOOLONG, ELOOP]@ -- -- * 'isDoesNotExistError' \/ 'NoSuchThing' -- The directory does not exist. -- @[ENOENT, ENOTDIR]@ -- -- * 'isPermissionError' \/ 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EACCES]@ -- -- * 'ResourceExhausted' -- Insufficient resources are available to perform the operation. -- @[EMFILE, ENFILE]@ -- -- * 'InappropriateType' -- The path refers to an existing non-directory object. -- @[ENOTDIR]@ listDir :: (MonadIO m, MonadThrow m) => Path b Dir -- ^ Directory to list -> m ([Path Abs Dir], [Path Abs File]) -- ^ Sub-directories and files listDir path = do bpath <- makeAbsolute path raw <- liftD D.getDirectoryContents bpath items <- forM (raw \\ [".", ".."]) $ \item -> do let ipath = toFilePath bpath F. item isDir <- liftIO (D.doesDirectoryExist ipath) if isDir then Left `liftM` parseAbsDir ipath else Right `liftM` parseAbsFile ipath return (lefts items, rights items) -- | Similar to 'listDir', but recursively traverses every sub-directory, -- and collects all files and directories. This can fail with the same -- exceptions as 'listDir'. listDirRecur :: (MonadIO m, MonadThrow m) => Path b Dir -- ^ Directory to list -> m ([Path Abs Dir], [Path Abs File]) -- ^ Sub-directories and files listDirRecur path = do items <- listDir path foldl' mappend items `liftM` mapM listDirRecur (fst items) -- | Copy directory recursively. This is not smart about symbolic links, but -- tries to preserve permissions when possible. If destination directory -- already exists, new files and sub-directories will complement its -- structure, possibly overwriting old files if they happen to have the same -- name as the new ones. copyDirRecur :: (MonadIO m, MonadCatch m) => Path b0 Dir -- ^ Source -> Path b1 Dir -- ^ Destination -> m () copyDirRecur src dest = do bsrc <- makeAbsolute src bdest <- makeAbsolute dest (dirs, files) <- listDirRecur bsrc mapM (swapParent bsrc bdest) dirs >>= zipWithM_ copyDir dirs mapM (swapParent bsrc bdest) files >>= zipWithM_ copyFile files -- | A helper for 'copyDirRecur', copies directory preserving permissions -- when possible. It /does not/ copies directory contents. copyDir :: (MonadIO m, MonadCatch m) => Path Abs Dir -- ^ Source -> Path Abs Dir -- ^ Destination -> m () copyDir src dest = do createDirIfMissing True dest ignoringIOErrors (copyPermissions src dest) -- | A helper for 'copyDirRecur' that replaces given path prefix with -- another one. swapParent :: MonadThrow m => Path Abs Dir -- ^ Original parent -> Path Abs Dir -- ^ New parent -> Path Abs t -- ^ Path to transform -> m (Path Abs t) swapParent old new path = (new ) `liftM` stripDir old path ---------------------------------------------------------------------------- -- Current working directory -- | Obtain the current working directory as an absolute path. -- -- In a multithreaded program, the current working directory is a global -- state shared among all threads of the process. Therefore, when performing -- filesystem operations from multiple threads, it is highly recommended to -- use absolute rather than relative paths (see: 'makeAbsolute'). -- -- The operation may fail with: -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'isDoesNotExistError' or 'NoSuchThing' -- There is no path referring to the working directory. -- @[EPERM, ENOENT, ESTALE...]@ -- -- * 'isPermissionError' or 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EACCES]@ -- -- * 'ResourceExhausted' -- Insufficient resources are available to perform the operation. -- -- * 'UnsupportedOperation' -- The operating system has no notion of current working directory. getCurrentDir :: (MonadIO m, MonadThrow m) => m (Path Abs Dir) getCurrentDir = liftIO D.getCurrentDirectory >>= parseAbsDir -- | Change the working directory to the given path. -- -- In a multithreaded program, the current working directory is a global -- state shared among all threads of the process. Therefore, when performing -- filesystem operations from multiple threads, it is highly recommended to -- use absolute rather than relative paths (see: 'makeAbsolute'). -- -- The operation may fail with: -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'InvalidArgument' -- The operand is not a valid directory name. -- @[ENAMETOOLONG, ELOOP]@ -- -- * 'isDoesNotExistError' or 'NoSuchThing' -- The directory does not exist. -- @[ENOENT, ENOTDIR]@ -- -- * 'isPermissionError' or 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EACCES]@ -- -- * 'UnsupportedOperation' -- The operating system has no notion of current working directory, or the -- working directory cannot be dynamically changed. -- -- * 'InappropriateType' -- The path refers to an existing non-directory object. -- @[ENOTDIR]@ setCurrentDir :: MonadIO m => Path b Dir -> m () setCurrentDir = liftD D.setCurrentDirectory -- | Run an 'IO' action with the given working directory and restore the -- original working directory afterwards, even if the given action fails due -- to an exception. -- -- The operation may fail with the same exceptions as 'getCurrentDir' and -- 'setCurrentDir'. withCurrentDir :: (MonadIO m, MonadMask m) => Path b Dir -- ^ Directory to execute in -> m a -- ^ Action to be executed -> m a withCurrentDir dir action = bracket getCurrentDir setCurrentDir $ const (setCurrentDir dir >> action) ---------------------------------------------------------------------------- -- Pre-defined directories -- | Returns the current user's home directory. -- -- The directory returned is expected to be writable by the current user, -- but note that it isn't generally considered good practice to store -- application-specific data here; use 'getAppUserDataDir' instead. -- -- On Unix, 'getHomeDir' returns the value of the @HOME@ environment -- variable. On Windows, the system is queried for a suitable path; a -- typical path might be @C:\/Users\//\/@. -- -- The operation may fail with: -- -- * 'UnsupportedOperation' -- The operating system has no notion of home directory. -- -- * 'isDoesNotExistError' -- The home directory for the current user does not exist, or -- cannot be found. getHomeDir :: (MonadIO m, MonadThrow m) => m (Path Abs Dir) getHomeDir = liftIO D.getHomeDirectory >>= resolveDir' -- | Obtain the path to a special directory for storing user-specific -- application data (traditional Unix location). -- -- The argument is usually the name of the application. Since it will be -- integrated into the path, it must consist of valid path characters. -- -- * On Unix-like systems, the path is @~\/./\/@. -- * On Windows, the path is @%APPDATA%\//\/@ -- (e.g. @C:\/Users\//\/\/AppData\/Roaming\//\/@) -- -- Note: the directory may not actually exist, in which case you would need -- to create it. It is expected that the parent directory exists and is -- writable. -- -- The operation may fail with: -- -- * 'UnsupportedOperation' -- The operating system has no notion of application-specific data -- directory. -- -- * 'isDoesNotExistError' -- The home directory for the current user does not exist, or cannot be -- found. getAppUserDataDir :: (MonadIO m, MonadThrow m) => String -- ^ Name of application (used in path construction) -> m (Path Abs Dir) getAppUserDataDir = (>>= parseAbsDir) . liftIO . D.getAppUserDataDirectory -- | Returns the current user's document directory. -- -- The directory returned is expected to be writable by the current user, -- but note that it isn't generally considered good practice to store -- application-specific data here; use 'getAppUserDataDir' instead. -- -- On Unix, 'getUserDocsDir' returns the value of the @HOME@ environment -- variable. On Windows, the system is queried for a suitable path; a -- typical path might be @C:\/Users\//\/\/Documents@. -- -- The operation may fail with: -- -- * 'UnsupportedOperation' -- The operating system has no notion of document directory. -- -- * 'isDoesNotExistError' -- The document directory for the current user does not exist, or -- cannot be found. getUserDocsDir :: (MonadIO m, MonadThrow m) => m (Path Abs Dir) getUserDocsDir = liftIO D.getUserDocumentsDirectory >>= parseAbsDir -- | Returns the current directory for temporary files. -- -- On Unix, 'getTempDir' returns the value of the @TMPDIR@ environment -- variable or \"\/tmp\" if the variable isn\'t defined. On Windows, the -- function checks for the existence of environment variables in the -- following order and uses the first path found: -- -- * -- TMP environment variable. -- -- * -- TEMP environment variable. -- -- * -- USERPROFILE environment variable. -- -- * -- The Windows directory -- -- The operation may fail with: -- -- * 'UnsupportedOperation' -- The operating system has no notion of temporary directory. -- -- The function doesn't verify whether the path exists. getTempDir :: (MonadIO m, MonadThrow m) => m (Path Abs Dir) getTempDir = liftIO D.getTemporaryDirectory >>= resolveDir' ---------------------------------------------------------------------------- -- Path transformation -- | Closed type family describing how to get absolute version of given -- 'Path'. type family AbsPath path where AbsPath (Path b File) = Path Abs File AbsPath (Path b Dir) = Path Abs Dir -- | Closed type family describing how to get relative version of given -- 'Path'. type family RelPath path where RelPath (Path b File) = Path Rel File RelPath (Path b Dir) = Path Rel Dir -- | Class of things ('Path's) that can be canonicalized and made absolute. class AnyPath path where -- | Make a path absolute and remove as many indirections from it as -- possible. Indirections include the two special directories @.@ and -- @..@, as well as any symbolic links. The input path need not point to -- an existing file or directory. -- -- __Note__: if you require only an absolute path, use 'makeAbsolute' -- instead. Most programs need not care about whether a path contains -- symbolic links. -- -- Due to the fact that symbolic links and @..@ are dependent on the state -- of the existing filesystem, the function can only make a conservative, -- best-effort attempt. Nevertheless, if the input path points to an -- existing file or directory, then the output path shall also point to -- the same file or directory. -- -- Formally, symbolic links and @..@ are removed from the longest prefix -- of the path that still points to an existing file. The function is not -- atomic, therefore concurrent changes in the filesystem may lead to -- incorrect results. -- -- (Despite the name, the function does not guarantee canonicity of the -- returned path due to the presence of hard links, mount points, etc.) -- -- Similar to 'normalise', an empty path is equivalent to the current -- directory. -- -- /Known bug(s)/: on Windows, the function does not resolve symbolic -- links. -- -- Please note that before version 1.2.3.0 of @directory@ package, this -- function had unpredictable behavior on non-existent paths. canonicalizePath :: (MonadIO m, MonadThrow m) => path -> m (AbsPath path) -- | Make a path absolute by prepending the current directory (if it isn't -- already absolute) and applying 'normalise' to the result. -- -- If the path is already absolute, the operation never fails. Otherwise, -- the operation may fail with the same exceptions as -- 'getCurrentDirectory'. makeAbsolute :: (MonadIO m, MonadThrow m) => path -> m (AbsPath path) -- | Make a path relative to given directory. makeRelative :: MonadThrow m => Path Abs Dir -- ^ Base directory -> path -- ^ Path that will be made relative to base directory -> m (RelPath path) -- | Make a path relative to current working directory. makeRelativeToCurrentDir :: (MonadIO m, MonadThrow m) => path -> m (RelPath path) instance AnyPath (Path b File) where canonicalizePath = liftD D.canonicalizePath >=> parseAbsFile makeAbsolute = liftD D.makeAbsolute >=> parseAbsFile makeRelative b p = parseRelFile (F.makeRelative (toFilePath b) (toFilePath p)) makeRelativeToCurrentDir p = getCurrentDir >>= flip makeRelative p instance AnyPath (Path b Dir) where canonicalizePath = liftD D.canonicalizePath >=> parseAbsDir makeAbsolute = liftD D.makeAbsolute >=> parseAbsDir makeRelative b p = parseRelDir (F.makeRelative (toFilePath b) (toFilePath p)) makeRelativeToCurrentDir p = getCurrentDir >>= flip makeRelative p -- | Append stringly-typed path to an absolute path and then canonicalize -- it. resolveFile :: (MonadIO m, MonadThrow m) => Path Abs Dir -- ^ Base directory -> FilePath -- ^ Path to resolve -> m (Path Abs File) resolveFile b p = f (toFilePath b F. p) >>= parseAbsFile where f = liftIO . D.canonicalizePath -- | The same as 'resolveFile', but uses current working directory. resolveFile' :: (MonadIO m, MonadThrow m) => FilePath -- ^ Path to resolve -> m (Path Abs File) resolveFile' p = getCurrentDir >>= flip resolveFile p -- | The same as 'resolveFile', but for directories. resolveDir :: (MonadIO m, MonadThrow m) => Path Abs Dir -- ^ Base directory -> FilePath -- ^ Path to resolve -> m (Path Abs Dir) resolveDir b p = f (toFilePath b F. p) >>= parseAbsDir where f = liftIO . D.canonicalizePath -- | The same as 'resolveDir', but uses current working directory. resolveDir' :: (MonadIO m, MonadThrow m) => FilePath -- ^ Path to resolve -> m (Path Abs Dir) resolveDir' p = getCurrentDir >>= flip resolveDir p ---------------------------------------------------------------------------- -- Actions on files -- | @'removeFile' file@ removes the directory entry for an existing file -- @file@, where @file@ is not itself a directory. The implementation may -- specify additional constraints which must be satisfied before a file can -- be removed (e.g. the file may not be in use by other processes). -- -- The operation may fail with: -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'InvalidArgument' -- The operand is not a valid file name. -- @[ENAMETOOLONG, ELOOP]@ -- -- * 'isDoesNotExistError' \/ 'NoSuchThing' -- The file does not exist. -- @[ENOENT, ENOTDIR]@ -- -- * 'isPermissionError' \/ 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EROFS, EACCES, EPERM]@ -- -- * 'UnsatisfiedConstraints' -- Implementation-dependent constraints are not satisfied. -- @[EBUSY]@ -- -- * 'InappropriateType' -- The operand refers to an existing directory. -- @[EPERM, EINVAL]@ removeFile :: MonadIO m => Path b File -> m () removeFile = liftD D.removeFile -- | @'renameFile' old new@ changes the name of an existing file system -- object from /old/ to /new/. If the /new/ object already exists, it is -- atomically replaced by the /old/ object. Neither path may refer to an -- existing directory. A conformant implementation need not support renaming -- files in all situations (e.g. renaming across different physical -- devices), but the constraints must be documented. -- -- The operation may fail with: -- -- * 'HardwareFault' -- A physical I\/O error has occurred. -- @[EIO]@ -- -- * 'InvalidArgument' -- Either operand is not a valid file name. -- @[ENAMETOOLONG, ELOOP]@ -- -- * 'isDoesNotExistError' \/ 'NoSuchThing' -- The original file does not exist, or there is no path to the target. -- @[ENOENT, ENOTDIR]@ -- -- * 'isPermissionError' \/ 'PermissionDenied' -- The process has insufficient privileges to perform the operation. -- @[EROFS, EACCES, EPERM]@ -- -- * 'ResourceExhausted' -- Insufficient resources are available to perform the operation. -- @[EDQUOT, ENOSPC, ENOMEM, EMLINK]@ -- -- * 'UnsatisfiedConstraints' -- Implementation-dependent constraints are not satisfied. -- @[EBUSY]@ -- -- * 'UnsupportedOperation' -- The implementation does not support renaming in this situation. -- @[EXDEV]@ -- -- * 'InappropriateType' -- Either path refers to an existing directory. -- @[ENOTDIR, EISDIR, EINVAL, EEXIST, ENOTEMPTY]@ renameFile :: MonadIO m => Path b0 File -- ^ Original location -> Path b1 File -- ^ New location -> m () renameFile = liftD2 D.renameFile -- | @'copyFile' old new@ copies the existing file from @old@ to @new@. If -- the @new@ file already exists, it is atomically replaced by the @old@ -- file. Neither path may refer to an existing directory. The permissions of -- @old@ are copied to @new@, if possible. copyFile :: MonadIO m => Path b0 File -- ^ Original location -> Path b1 File -- ^ Where to put copy -> m () copyFile = liftD2 D.copyFile -- | Given an executable file name, search for such file in the directories -- listed in system @PATH@. The returned value is the path to the found -- executable or 'Nothing' if an executable with the given name was not -- found. For example ('findExecutable' \"ghc\") gives you the path to GHC. -- -- The path returned by 'findExecutable' corresponds to the -- program that would be executed by 'System.Process.createProcess' -- when passed the same string (as a RawCommand, not a ShellCommand). -- -- On Windows, 'findExecutable' calls the Win32 function 'SearchPath', which -- may search other places before checking the directories in @PATH@. Where -- it actually searches depends on registry settings, but notably includes -- the directory containing the current executable. See -- for more details. findExecutable :: MonadIO m => Path Rel File -- ^ Executable file name -> m (Maybe (Path Abs File)) -- ^ Path to found executable findExecutable = liftM (>>= parseAbsFile) . liftD D.findExecutable -- | Search through the given set of directories for the given file. findFile :: (MonadIO m, MonadThrow m) => [Path b Dir] -- ^ Set of directories to search in -> Path Rel File -- ^ Filename of interest -> m (Maybe (Path Abs File)) -- ^ Absolute path to file (if found) findFile [] _ = return Nothing findFile (d:ds) file = do bfile <- ( file) `liftM` makeAbsolute d exist <- doesFileExist bfile if exist then return (Just bfile) else findFile ds file -- | Search through the given set of directories for the given file and -- return a list of paths where the given file exists. findFiles :: (MonadIO m, MonadThrow m) => [Path b Dir] -- ^ Set of directories to search in -> Path Rel File -- ^ Filename of interest -> m [Path Abs File] -- ^ Absolute paths to all found files findFiles = findFilesWith (const (return True)) -- | Search through the given set of directories for the given file and with -- the given property (usually permissions) and return a list of paths where -- the given file exists and has the property. findFilesWith :: (MonadIO m, MonadThrow m) => (Path Abs File -> m Bool) -- ^ How to test the files -> [Path b Dir] -- ^ Set of directories to search in -> Path Rel File -- ^ Filename of interest -> m [Path Abs File] -- ^ Absolute paths to all found files findFilesWith _ [] _ = return [] findFilesWith f (d:ds) file = do bfile <- ( file) `liftM` makeAbsolute d exist <- doesFileExist file b <- if exist then f bfile else return False if b then (bfile:) `liftM` findFilesWith f ds file else findFilesWith f ds file ---------------------------------------------------------------------------- -- Temporary files and directories -- | Use a temporary file that doesn't already exist. -- -- Creates a new temporary file inside the given directory, making use of -- the template. The temporary file is deleted after use. withTempFile :: (MonadIO m, MonadMask m) => Path b Dir -- ^ Directory to create the file in -> String -- ^ File name template, see 'openTempFile' -> (Path Abs File -> Handle -> m a) -- ^ Callback that can use the file -> m a withTempFile path t action = do apath <- makeAbsolute path T.withTempFile (toFilePath apath) t $ \file h -> parseAbsFile file >>= flip action h -- | Create and use a temporary directory. -- -- Creates a new temporary directory inside the given directory, making use -- of the template. The temporary directory is deleted after use. withTempDir :: (MonadIO m, MonadMask m) => Path b Dir -- ^ Directory to create the file in -> String -- ^ Directory name template, see 'openTempFile' -> (Path Abs Dir -> m a) -- ^ Callback that can use the directory -> m a withTempDir path t action = do apath <- makeAbsolute path T.withTempDirectory (toFilePath apath) t (parseAbsDir >=> action) -- | Create and use a temporary file in the system standard temporary -- directory. -- -- Behaves exactly the same as 'withTempFile', except that the parent -- temporary directory will be that returned by 'getTempDir'. withSystemTempFile :: (MonadIO m, MonadMask m) => String -- ^ File name template, see 'openTempFile' -> (Path Abs File -> Handle -> m a) -- ^ Callback that can use the file -> m a withSystemTempFile t action = getTempDir >>= \path -> withTempFile path t action -- | Create and use a temporary directory in the system standard temporary -- directory. -- -- Behaves exactly the same as 'withTempDir', except that the parent -- temporary directory will be that returned by 'getTempDir'. withSystemTempDir :: (MonadIO m, MonadMask m) => String -- ^ Directory name template, see 'openTempFile' -> (Path Abs Dir -> m a) -- ^ Callback that can use the directory -> m a withSystemTempDir t action = getTempDir >>= \path -> withTempDir path t action -- | The function creates a temporary file in @rw@ mode. The created file -- isn't deleted automatically, so you need to delete it manually. -- -- The file is created with permissions such that only the current user can -- read\/write it. -- -- With some exceptions (see below), the file will be created securely in -- the sense that an attacker should not be able to cause openTempFile to -- overwrite another file on the filesystem using your credentials, by -- putting symbolic links (on Unix) in the place where the temporary file is -- to be created. On Unix the @O_CREAT@ and @O_EXCL@ flags are used to -- prevent this attack, but note that @O_EXCL@ is sometimes not supported on -- NFS filesystems, so if you rely on this behaviour it is best to use local -- filesystems only. openTempFile :: (MonadIO m, MonadThrow m) => Path b Dir -- ^ Directory to create file in -> String -- ^ File name template; if the template is "foo.ext" then the created -- file will be @\"fooXXX.ext\"@ where @XXX@ is some random number -> m (Path Abs File, Handle) -- ^ Name of created file and its 'Handle' openTempFile path t = do apath <- makeAbsolute path (tfile, h) <- liftD2' T.openTempFile apath t (,h) `liftM` parseAbsFile tfile -- | Like 'openTempFile', but opens the file in binary mode. On Windows, -- reading a file in text mode (which is the default) will translate @CRLF@ -- to @LF@, and writing will translate @LF@ to @CRLF@. This is usually what -- you want with text files. With binary files this is undesirable; also, as -- usual under Microsoft operating systems, text mode treats control-Z as -- EOF. Binary mode turns off all special treatment of end-of-line and -- end-of-file characters. openBinaryTempFile :: (MonadIO m, MonadThrow m) => Path b Dir -- ^ Directory to create file in -> String -- ^ File name template, see 'openTempFile' -> m (Path Abs File, Handle) -- ^ Name of created file and its 'Handle' openBinaryTempFile path t = do apath <- makeAbsolute path (tfile, h) <- liftD2' T.openBinaryTempFile apath t (,h) `liftM` parseAbsFile tfile -- | Create temporary directory. The created directory isn't deleted -- automatically, so you need to delete it manually. -- -- The directory is created with permissions such that only the current user -- can read\/write it. createTempDir :: (MonadIO m, MonadThrow m) => Path b Dir -- ^ Directory to create file in -> String -- ^ Directory name template, see 'openTempFile' -> m (Path Abs Dir) -- ^ Name of created temporary directory createTempDir path t = makeAbsolute path >>= \apath -> liftD2' T.createTempDirectory apath t >>= parseAbsDir ---------------------------------------------------------------------------- -- Existence tests -- | The operation 'doesFileExist' returns 'True' if the argument file -- exists and is not a directory, and 'False' otherwise. doesFileExist :: MonadIO m => Path b File -> m Bool doesFileExist = liftD D.doesFileExist -- | The operation 'doesDirExist' returns 'True' if the argument file exists -- and is either a directory or a symbolic link to a directory, and 'False' -- otherwise. doesDirExist :: MonadIO m => Path b Dir -> m Bool doesDirExist = liftD D.doesDirectoryExist -- | Check if there is a file or directory on specified path. isLocationOccupied :: MonadIO m => Path b t -> m Bool isLocationOccupied path = do let fp = toFilePath path file <- liftIO (D.doesFileExist fp) dir <- liftIO (D.doesDirectoryExist fp) return (file || dir) -- | If argument of the function throws a -- 'System.IO.Error.doesNotExistErrorType', 'Nothing' is returned (other -- exceptions propagate). Otherwise the result is returned inside a 'Just'. forgivingAbsence :: (MonadIO m, MonadCatch m) => m a -> m (Maybe a) forgivingAbsence f = catchIf isDoesNotExistError (Just `liftM` f) (const $ return Nothing) -- | The same as 'forgivingAbsence', but ignores result. ignoringAbsence :: (MonadIO m, MonadCatch m) => m a -> m () ignoringAbsence = liftM (const ()) . forgivingAbsence ---------------------------------------------------------------------------- -- Permissions -- | The 'getPermissions' operation returns the permissions for the file or -- directory. -- -- The operation may fail with: -- -- * 'isPermissionError' if the user is not permitted to access -- the permissions; or -- -- * 'isDoesNotExistError' if the file or directory does not exist. getPermissions :: MonadIO m => Path b t -> m D.Permissions getPermissions = liftD D.getPermissions -- | The 'setPermissions' operation sets the permissions for the file or -- directory. -- -- The operation may fail with: -- -- * 'isPermissionError' if the user is not permitted to set -- the permissions; or -- -- * 'isDoesNotExistError' if the file or directory does not exist. setPermissions :: MonadIO m => Path b t -> D.Permissions -> m () setPermissions = liftD2' D.setPermissions -- | Set permissions for the object found on second given path so they match -- permissions of the object on the first path. copyPermissions :: MonadIO m => Path b0 t0 -- ^ From where to copy -> Path b1 t1 -- ^ What to modify -> m () copyPermissions = liftD2 D.copyPermissions ---------------------------------------------------------------------------- -- Timestamps #if MIN_VERSION_directory(1,2,3) -- | Obtain the time at which the file or directory was last accessed. -- -- The operation may fail with: -- -- * 'isPermissionError' if the user is not permitted to read -- the access time; or -- -- * 'isDoesNotExistError' if the file or directory does not exist. -- -- Caveat for POSIX systems: This function returns a timestamp with -- sub-second resolution only if this package is compiled against -- @unix-2.6.0.0@ or later and the underlying filesystem supports them. getAccessTime :: MonadIO m => Path b t -> m UTCTime getAccessTime = liftD D.getAccessTime -- | Change the time at which the file or directory was last accessed. -- -- The operation may fail with: -- -- * 'isPermissionError' if the user is not permitted to alter the -- access time; or -- -- * 'isDoesNotExistError' if the file or directory does not exist. -- -- Some caveats for POSIX systems: -- -- * Not all systems support @utimensat@, in which case the function can -- only emulate the behavior by reading the modification time and then -- setting both the access and modification times together. On systems -- where @utimensat@ is supported, the access time is set atomically with -- nanosecond precision. -- -- * If compiled against a version of @unix@ prior to @2.7.0.0@, the -- function would not be able to set timestamps with sub-second -- resolution. In this case, there would also be loss of precision in the -- modification time. setAccessTime :: MonadIO m => Path b t -> UTCTime -> m () setAccessTime = liftD2' D.setAccessTime -- | Change the time at which the file or directory was last modified. -- -- The operation may fail with: -- -- * 'isPermissionError' if the user is not permitted to alter the -- modification time; or -- -- * 'isDoesNotExistError' if the file or directory does not exist. -- -- Some caveats for POSIX systems: -- -- * Not all systems support @utimensat@, in which case the function can -- only emulate the behavior by reading the access time and then setting -- both the access and modification times together. On systems where -- @utimensat@ is supported, the modification time is set atomically with -- nanosecond precision. -- -- * If compiled against a version of @unix@ prior to @2.7.0.0@, the -- function would not be able to set timestamps with sub-second -- resolution. In this case, there would also be loss of precision in the -- access time. setModificationTime :: MonadIO m => Path b t -> UTCTime -> m () setModificationTime = liftD2' D.setAccessTime #endif -- | Obtain the time at which the file or directory was last modified. -- -- The operation may fail with: -- -- * 'isPermissionError' if the user is not permitted to read -- the modification time; or -- -- * 'isDoesNotExistError' if the file or directory does not exist. -- -- Caveat for POSIX systems: This function returns a timestamp with -- sub-second resolution only if this package is compiled against -- @unix-2.6.0.0@ or later and the underlying filesystem supports them. getModificationTime :: MonadIO m => Path b t -> m UTCTime getModificationTime = liftD D.getModificationTime ---------------------------------------------------------------------------- -- Helpers -- | Lift action in 'IO' that takes 'FilePath' into action in slightly more -- abstract monad that takes 'Path'. liftD :: MonadIO m => (FilePath -> IO a) -- ^ Original action -> Path b t -- ^ 'Path' argument -> m a -- ^ Lifted action liftD m = liftIO . m . toFilePath -- | Similar to 'liftD' for functions with arity 2. liftD2 :: MonadIO m => (FilePath -> FilePath -> IO a) -- ^ Original action -> Path b0 t0 -- ^ First 'Path' argument -> Path b1 t1 -- ^ Second 'Path' argument -> m a liftD2 m a b = liftIO $ m (toFilePath a) (toFilePath b) -- | Similar to 'liftD2', but allows to pass second argument of arbitrary -- type. liftD2' :: MonadIO m => (FilePath -> v -> IO a) -- ^ Original action -> Path b t -- ^ First 'Path' argument -> v -- ^ Second argument -> m a liftD2' m a v = liftIO $ m (toFilePath a) v -- | Perform specified action ignoring IO exceptions it may throw. ignoringIOErrors :: MonadCatch m => m () -> m () ignoringIOErrors ioe = ioe `catch` handler where handler :: MonadThrow m => IOError -> m () handler = const (return ())