{-#LANGUAGE RankNTypes#-}


module Pipes.Prelude.Text
   ( 
   -- * Simple line-based Text IO
   -- $lineio
   
   fromHandleLn
   , toHandleLn
   , stdinLn
   , stdoutLn
   , stdoutLn'
   , readFileLn
   , writeFileLn
   ) where

import qualified System.IO as IO
import Control.Exception (throwIO, try)
import Foreign.C.Error (Errno(Errno), ePIPE)
import qualified GHC.IO.Exception as G
import Data.Text (Text)
import qualified Data.Text as T
import qualified Data.Text.IO as T
import Pipes
import qualified Pipes.Safe.Prelude as Safe
import Pipes.Safe (MonadSafe(..), runSafeT, runSafeP)
import Prelude hiding (readFile, writeFile)

{- $lineio
   Line-based operations are marked with a final \-@Ln@, like 'stdinLn', 'readFileLn', etc. 
   They are drop-in 'Text' replacements for the corresponding 'String' operations in 
   @Pipes.Prelude@ and @Pipes.Safe.Prelude@ - a final \-@Ln@ being added where necessary. 
   This module can thus be imported unqualified if @Pipes.Prelude@ is imported qualified, as
   it must be.

   In using the line-based operations, one is producing and consuming semantically significant individual texts, 
   understood as lines, just as one would produce or pipe 'Int's or 'Char's or anything else.
   The standard materials from @Pipes@ and @Pipes.Prelude@ and
   @Data.Text@ are all you need to work with them, and
   you can use these operations without using any of the other modules in this package. 

   Thus, to take a trivial case, here we upper-case three lines from standard input and write 
   them to a file.  (@runSafeT@ from @Pipes.Safe@ just makes sure to close any handles opened in its scope; 
   it is only needed for @readFileLn@ and @writeFileLn@.)

>>> import Pipes
>>> import qualified Pipes.Prelude as P
>>> import qualified Pipes.Prelude.Text as Text
>>> import qualified Data.Text as T
>>> Text.runSafeT $ runEffect $ Text.stdinLn >-> P.take 3 >-> P.map T.toUpper >-> Text.writeFileLn "threelines.txt"
one<Enter>
two<Enter>
three<Enter>
>>> :! cat "threelines.txt"
ONE
TWO
THREE

   The point of view is very much that of @Pipes.Prelude@, substituting @Text@ for @String@. 
   It would still be the same even if
   we did something a bit more sophisticated, like run an ordinary attoparsec 'Text' parser on
   each line, as is frequently desirable.  Here we use
   a minimal attoparsec number parser, @scientific@, on separate lines of standard input, 
   dropping bad parses with @P.concat@:

>>> import Data.Attoparsec.Text (parseOnly, scientific)
>>> P.toListM $ Text.stdinLn >-> P.takeWhile (/= "quit") >-> P.map (parseOnly scientific) >-> P.concat 
1<Enter>
2<Enter>
bad<Enter>
3<Enter>
quit<Enter>
[1.0,2.0,3.0]

   The line-based operations are, however, subject to a number of caveats.
   
   * Where these line-based operations read from a handle, they will 
     accumulate indefinitely long lines. This makes sense for input 
     typed in by a user, and for locally produced files of known characteristics, but
     otherwise not. See the post on
     <http://www.haskellforall.com/2013/09/perfect-streaming-using-pipes-bytestring.html perfect streaming> 
     to see why @pipes-bytestring@ and this package, outside this module, take a different approach, in which
     lines themselves are permitted to stream without accumulation. 
   
   * The line-based operations, 
     like those in @Data.Text.IO@, use the system encoding (and @T.hGetLine@, @T.hPutLine@ etc.)
     and thus are slower than the \'official\' route, which would use the very fast 
     bytestring IO operations from @Pipes.ByteString@ and the
     encoding and decoding functions in @Pipes.Text.Encoding@, which are also quite fast
     thanks to the @streaming-commons@ package.

   * The line-based operations (again like those in @Data.Text.IO@) will 
     generate text exceptions after the fashion of 
     @Data.Text.Encoding@, rather than returning the undigested bytes in the 
     style of @Pipes.Text.Encoding@. This is the standard practice in the pipes libraries.

-}


{-| Read separate lines of 'Text' from 'IO.stdin' using 'T.getLine', terminating on end of input.

    This function will accumulate indefinitely long strict 'Text's. See the caveats above.
-}
stdinLn :: MonadIO m => Producer' T.Text m ()
stdinLn = fromHandleLn IO.stdin
{-# INLINABLE stdinLn #-}


{-| Write 'Text' lines to 'IO.stdout' using 'putStrLn', terminating without error on a broken output pipe
-}
stdoutLn :: MonadIO m => Consumer' T.Text m ()
stdoutLn = go
  where
    go = do
        str <- await
        x   <- liftIO $ try (T.putStrLn str)
        case x of
           Left (G.IOError { G.ioe_type  = G.ResourceVanished
                           , G.ioe_errno = Just ioe })
                | Errno ioe == ePIPE
                    -> return ()
           Left  e  -> liftIO (throwIO e)
           Right () -> go
{-# INLINABLE stdoutLn #-}

{-| Write lines of 'Text' to 'IO.stdout'. This does not handle a broken output pipe,    
    but has a polymorphic return value.
-}
stdoutLn' :: MonadIO m => Consumer' T.Text m r
stdoutLn' = for cat (\str -> liftIO (T.putStrLn str))
{-# INLINABLE stdoutLn' #-}

{-# RULES
    "p >-> stdoutLn'" forall p .
        p >-> stdoutLn' = for p (\str -> liftIO (T.putStrLn str))
  #-}

{-| Read separate lines of 'Text' from a 'IO.Handle' using 'T.hGetLine', 
    terminating at the end of input

    This operation will accumulate indefinitely large strict texts. See the caveats above.
-}
fromHandleLn :: MonadIO m => IO.Handle -> Producer' Text m ()
fromHandleLn h =  go where
      getLine :: IO (Either G.IOException Text)
      getLine = try (T.hGetLine h)

      go = do txt <- liftIO getLine
              case txt of
                Left e  -> return ()
                Right y -> do yield y
                              go
{-# INLINABLE fromHandleLn #-}

-- to do: investigate differences from the above: 
-- fromHandleLn :: MonadIO m => IO.Handle -> Producer' T.Text m ()
-- fromHandleLn h = go
--   where
--     go = do
--         eof <- liftIO $ IO.hIsEOF h
--         unless eof $ do
--             str <- liftIO $ T.hGetLine h
--             yield str
--             go
-- {-# INLINABLE fromHandleLn #-}


-- | Write separate lines of 'Text' to a 'IO.Handle' using 'T.hPutStrLn'
toHandleLn :: MonadIO m => IO.Handle -> Consumer' T.Text m r
toHandleLn handle = for cat (\str -> liftIO (T.hPutStrLn handle str))
{-# INLINABLE toHandleLn #-}

{-# RULES
    "p >-> toHandleLn handle" forall p handle .
        p >-> toHandleLn handle = for p (\str -> liftIO (T.hPutStrLn handle str))
  #-}


{-| Stream separate lines of text from a file. Apply @runSafeT@ after running the
    pipeline to manage the opening and closing of the handle.
  
    This operation will accumulate indefinitely long strict text chunks. 
    See the caveats above.
-}
readFileLn :: MonadSafe m => FilePath -> Producer Text m ()
readFileLn file = Safe.withFile file IO.ReadMode fromHandleLn
{-# INLINE readFileLn #-}



{-| Write lines to a file. Apply @runSafeT@ after running the
    pipeline to manage the opening and closing of the handle.
-}
writeFileLn :: (MonadSafe m) => FilePath -> Consumer' Text m r
writeFileLn file = Safe.withFile file IO.WriteMode toHandleLn
{-# INLINABLE writeFileLn #-}