-- Hoogle documentation, generated by Haddock -- See Hoogle, http://www.haskell.org/hoogle/ -- | Re-export of Shake using well-typed paths and ReaderT. -- -- Re-export of Shake using well-typed paths and ReaderT. You can thread -- logging through your Shake Actions, and better keep track of source -- and output folders using the Within type. @package shake-plus @version 0.2.0.1 -- | License : MIT Stability : experimental -- -- Core definitions of shake-plus. module Development.Shake.Plus.Core -- | Monads in which Actions may be embedded. class MonadIO m => MonadAction m liftAction :: MonadAction m => Action a -> m a class Monad m => MonadRules m liftRules :: MonadRules m => Rules a -> m a newtype UnliftAction m UnliftAction :: (forall a. m a -> Action a) -> UnliftAction m [unliftAction] :: UnliftAction m -> forall a. m a -> Action a -- | Monads which allow their actions to be run in Action. -- -- For the same reasons as MonadUnliftIO this is limited to -- ReaderT and IdentityT transformers on top of -- Action. class MonadAction m => MonadUnliftAction m withRunInAction :: MonadUnliftAction m => ((forall a. m a -> Action a) -> Action b) -> m b withUnliftAction :: MonadUnliftAction m => (UnliftAction m -> Action a) -> m a askUnliftAction :: MonadUnliftAction m => m (UnliftAction m) toAction :: MonadUnliftAction m => m a -> m (Action a) -- | Concrete Action runner, hardcoded to `ReaderT r Action a`. data RAction r a -- | Concrete Rules collector, hardcoded to `ReaderT r Rules a`. data ShakePlus r a -- | Run an RAction with an environment, consuming it for a result. runRAction :: MonadAction m => env -> RAction env a -> m a -- | Run a ShakePlus with an environment, consuming it for some -- Shake Rules. runShakePlus :: MonadRules m => env -> ShakePlus env a -> m a -- | Run a ShakePlus with just a LogFunc in the environment -- that logs to stderr. runSimpleShakePlus :: MonadIO m => ShakePlus LogFunc a -> m () -- | Unlifted parallel. parallel :: MonadUnliftAction m => [m a] -> m [a] -- | Unlifted forP. forP :: MonadUnliftAction m => [a] -> (a -> m b) -> m [b] -- | Unlifted par. par :: MonadUnliftAction m => m a -> m b -> m (a, b) -- | The Action monad, use liftIO to raise IO actions -- into it, and need to execute files. Action values are used by -- addUserRule and action. The Action monad -- tracks the dependencies of a rule. To raise an exception call -- error, MonadFail or liftIO . -- throwIO. data Action a -- | Define a set of rules. Rules can be created with calls to functions -- such as %> or action. Rules are combined with either -- the Monoid instance, or (more commonly) the Monad -- instance and do notation. To define your own custom types of -- rule, see Development.Shake.Rule. data Rules a -- | A type synonym for file patterns, containing // and -- *. For the syntax and semantics of FilePattern see -- ?==. -- -- Most normaliseExd FilePath values are suitable as -- FilePattern values which match only that specific file. On -- Windows \ is treated as equivalent to /. -- -- You can write FilePattern values as a literal string, or build -- them up using the operators <.>, </> and -- <//>. However, beware that: -- -- type FilePattern = String -- | Main entry point for running Shake build systems. For an example see -- the top of the module Development.Shake. Use -- ShakeOptions to specify how the system runs, and Rules -- to specify what to build. The function will throw an exception if the -- build fails. -- -- To use command line flags to modify ShakeOptions see -- shakeArgs. shake :: ShakeOptions -> Rules () -> IO () -- | Run a build system using command line arguments for configuration. The -- available flags are those from shakeOptDescrs, along with a few -- additional make compatible flags that are not represented in -- ShakeOptions, such as --print-directory. If there are -- no file arguments then the Rules are used directly, otherwise -- the file arguments are wanted (after calling -- withoutActions). As an example: -- -- 
--   main = shakeArgs shakeOptions{shakeFiles = "_make", shakeProgress = progressSimple} $ do
--       phony "clean" $ removeFilesAfter "_make" ["//*"]
--       want ["_make/neil.txt","_make/emily.txt"]
--       "_make/*.txt" %> \out ->
--           ... build action here ...
--
-- -- This build system will default to building neil.txt and -- emily.txt, while showing progress messages, and putting the -- Shake files in locations such as _make/.database. Some -- example command line flags: -- -- shakeArgs :: ShakeOptions -> Rules () -> IO () -- | The default set of ShakeOptions. shakeOptions :: ShakeOptions instance Development.Shake.Plus.Core.MonadRules (Development.Shake.Plus.Core.ShakePlus r) instance Control.Monad.IO.Class.MonadIO (Development.Shake.Plus.Core.ShakePlus r) instance Control.Monad.Reader.Class.MonadReader r (Development.Shake.Plus.Core.ShakePlus r) instance GHC.Base.Monad (Development.Shake.Plus.Core.ShakePlus r) instance GHC.Base.Applicative (Development.Shake.Plus.Core.ShakePlus r) instance GHC.Base.Functor (Development.Shake.Plus.Core.ShakePlus r) instance Control.Monad.Fail.MonadFail (Development.Shake.Plus.Core.RAction r) instance Development.Shake.Plus.Core.MonadUnliftAction (Development.Shake.Plus.Core.RAction r) instance Development.Shake.Plus.Core.MonadAction (Development.Shake.Plus.Core.RAction r) instance Control.Monad.IO.Class.MonadIO (Development.Shake.Plus.Core.RAction r) instance Control.Monad.Reader.Class.MonadReader r (Development.Shake.Plus.Core.RAction r) instance GHC.Base.Monad (Development.Shake.Plus.Core.RAction r) instance GHC.Base.Applicative (Development.Shake.Plus.Core.RAction r) instance GHC.Base.Functor (Development.Shake.Plus.Core.RAction r) instance Control.Monad.Catch.MonadThrow (Development.Shake.Plus.Core.ShakePlus r) instance Control.Monad.Catch.MonadThrow (Development.Shake.Plus.Core.RAction r) instance Development.Shake.Plus.Core.MonadRules Development.Shake.Internal.Core.Rules.Rules instance Development.Shake.Plus.Core.MonadRules m => Development.Shake.Plus.Core.MonadRules (Control.Monad.Trans.Reader.ReaderT r m) instance Development.Shake.Plus.Core.MonadUnliftAction Development.Shake.Internal.Core.Types.Action instance Development.Shake.Plus.Core.MonadUnliftAction m => Development.Shake.Plus.Core.MonadUnliftAction (Control.Monad.Trans.Reader.ReaderT r m) instance Development.Shake.Plus.Core.MonadAction Development.Shake.Internal.Core.Types.Action instance Development.Shake.Plus.Core.MonadAction m => Development.Shake.Plus.Core.MonadAction (Control.Monad.Trans.Reader.ReaderT r m) -- | License : MIT Stability : experimental -- -- Utilities in Development.Shake.Config lifted to -- MonadAction and FileLike/DirLike. module Development.Shake.Plus.Config -- | Lifted readConfigFile with well-typed path. readConfigFile :: (MonadIO m, FileLike b a) => a -> m (HashMap String String) -- | Lifted readConfigFileWithEnv with well-typed path. readConfigFileWithEnv :: (MonadIO m, FileLike b a) => [(String, String)] -> a -> m (HashMap String String) -- | Lifted usingConfigFile with well-typed path. usingConfigFile :: (MonadRules m, FileLike b a) => a -> m () -- | Lifted usingConfig. usingConfig :: MonadRules m => HashMap String String -> m () -- | Lifted getConfig. getConfig :: MonadAction m => String -> m (Maybe String) -- | Lifted getConfigKeys. getConfigKeys :: MonadAction m => m [String] -- | License : MIT Stability : experimental -- -- Utilities in Development.Shake.Command lifted to -- MonadAction. module Development.Shake.Plus.Command -- | Lifted version of command. command :: (Partial, CmdResult r, MonadAction m) => [CmdOption] -> String -> [String] -> m r -- | Lifted version of command_. command_ :: (Partial, MonadAction m) => [CmdOption] -> String -> [String] -> m () -- | Build or execute a system command. Before using cmd to run a -- command, make sure you need any files that are used by the -- command. -- -- -- -- Typically only string literals should be passed as String -- arguments. When using variables prefer [myvar] so that if -- myvar contains spaces they are properly escaped. -- -- As some examples, here are some calls, and the resulting command -- string: -- -- 
--   cmd_ "git log --pretty=" "oneline"           -- git log --pretty= oneline
--   cmd_ "git log --pretty=" ["oneline"]         -- git log --pretty= oneline
--   cmd_ "git log" ("--pretty=" ++ "oneline")    -- git log --pretty=oneline
--   cmd_ "git log" ("--pretty=" ++ "one line")   -- git log --pretty=one line
--   cmd_ "git log" ["--pretty=" ++ "one line"]   -- git log "--pretty=one line"
--
-- -- More examples, including return values, see this translation of the -- examples given for the command function: -- -- 
--   cmd_ "gcc -c myfile.c"                                       -- compile a file, throwing an exception on failure
--   Exit c <- cmd "gcc -c" [myfile]                              -- run a command, recording the exit code
--   (Exit c, Stderr err) <- cmd "gcc -c myfile.c"                -- run a command, recording the exit code and error output
--   Stdout out <- cmd "gcc -MM myfile.c"                         -- run a command, recording the output
--   cmd (Cwd "generated") "gcc -c" [myfile] :: Action ()         -- run a command in a directory
--   
--   let gccCommand = cmd "gcc -c" :: CmdArgument                 -- build a sub-command. cmd can return CmdArgument values as well as execute commands
--   cmd (Cwd "generated") gccCommand [myfile]                 -- splice that command into a greater command
--
-- -- If you use cmd inside a do block and do not use the -- result, you may get a compile-time error about being unable to deduce -- CmdResult. To avoid this error, use cmd_. If you enable -- OverloadedStrings or OverloadedLists you may have to -- give type signatures to the arguments, or use the more constrained -- command instead. -- -- The cmd function can also be run in the IO monad, but -- then Traced is ignored and command lines are not echoed. As an -- example: -- -- 
--   cmd (Cwd "generated") Shell "gcc -c myfile.c" :: IO ()
--
cmd :: (Partial, CmdArguments args) => args :-> Action r -- | See cmd. Same as cmd except with a unit result. -- cmd is to cmd_ as command is to command_. cmd_ :: (Partial, CmdArguments args, Unit args) => args :-> Action () -- | The identity function which requires the inner argument to be -- (). Useful for functions with overloaded return types. -- -- 
--   \(x :: Maybe ()) -> unit x == x
--
unit :: () => m () -> m () -- | The arguments to cmd - see cmd for examples and -- semantics. newtype CmdArgument CmdArgument :: [Either CmdOption String] -> CmdArgument -- | The arguments to cmd - see cmd for examples and -- semantics. class CmdArguments t -- | Arguments to cmd cmdArguments :: CmdArguments t => CmdArgument -> t -- | Class to convert an a to a CmdArgument class IsCmdArgument a -- | Conversion to a CmdArgument toCmdArgument :: IsCmdArgument a => a -> CmdArgument -- | A type annotation, equivalent to the first argument, but in variable -- argument contexts, gives a clue as to what return type is expected -- (not actually enforced). type (:->) a t = a -- | Collect the stdout of the process. If used, the -- stdout will not be echoed to the terminal, unless you include -- EchoStdout. The value type may be either String, or -- either lazy or strict ByteString. -- -- Note that most programs end their output with a trailing newline, so -- calling ghc --numeric-version will result in Stdout of -- "6.8.3\n". If you want to automatically trim the resulting -- string, see StdoutTrim. newtype Stdout a Stdout :: a -> Stdout a [fromStdout] :: Stdout a -> a -- | Like Stdout but remove all leading and trailing whitespaces. newtype StdoutTrim a StdoutTrim :: a -> StdoutTrim a [fromStdoutTrim] :: StdoutTrim a -> a -- | Collect the stderr of the process. If used, the -- stderr will not be echoed to the terminal, unless you include -- EchoStderr. The value type may be either String, or -- either lazy or strict ByteString. newtype Stderr a Stderr :: a -> Stderr a [fromStderr] :: Stderr a -> a -- | Collect the stdout and stderr of the process. If -- used, the stderr and stdout will not be echoed to -- the terminal, unless you include EchoStdout and -- EchoStderr. The value type may be either String, or -- either lazy or strict ByteString. newtype Stdouterr a Stdouterr :: a -> Stdouterr a [fromStdouterr] :: Stdouterr a -> a -- | Collect the ExitCode of the process. If you do not collect the -- exit code, any ExitFailure will cause an exception. newtype Exit Exit :: ExitCode -> Exit [fromExit] :: Exit -> ExitCode -- | Collect the ProcessHandle of the process. If you do collect the -- process handle, the command will run asyncronously and the call to -- cmd / command will return as soon as the process is -- spawned. Any Stdout / Stderr captures will return empty -- strings. newtype Process Process :: ProcessHandle -> Process [fromProcess] :: Process -> ProcessHandle -- | Collect the time taken to execute the process. Can be used in -- conjunction with CmdLine to write helper functions that print -- out the time of a result. -- -- 
--   timer :: (CmdResult r, MonadIO m) => (forall r . CmdResult r => m r) -> m r
--   timer act = do
--       (CmdTime t, CmdLine x, r) <- act
--       liftIO $ putStrLn $ "Command " ++ x ++ " took " ++ show t ++ " seconds"
--       pure r
--   
--   run :: IO ()
--   run = timer $ cmd "ghc --version"
--
newtype CmdTime CmdTime :: Double -> CmdTime [fromCmdTime] :: CmdTime -> Double -- | Collect the command line used for the process. This command line will -- be approximate - suitable for user diagnostics, but not for direct -- execution. newtype CmdLine CmdLine :: String -> CmdLine [fromCmdLine] :: CmdLine -> String -- | The results produced by fsatrace. All files will be absolute -- paths. You can get the results for a cmd by requesting a value -- of type [FSATrace]. data FSATrace a -- | Writing to a file FSAWrite :: a -> FSATrace a -- | Reading from a file FSARead :: a -> FSATrace a -- | Deleting a file FSADelete :: a -> FSATrace a -- | Moving, arguments destination, then source FSAMove :: a -> a -> FSATrace a -- | Querying/stat on a file FSAQuery :: a -> FSATrace a -- | Touching a file FSATouch :: a -> FSATrace a -- | A class for specifying what results you want to collect from a -- process. Values are formed of Stdout, Stderr, -- Exit and tuples of those. class CmdResult a -- | The allowable String-like values that can be captured. class CmdString a -- | Options passed to command or cmd to control how -- processes are executed. data CmdOption -- | Change the current directory in the spawned process. By default uses -- this processes current directory. Successive Cwd options are -- joined together, to change into nested directories. Cwd :: FilePath -> CmdOption -- | Change the environment variables in the spawned process. By default -- uses this processes environment. Env :: [(String, String)] -> CmdOption -- | Add an environment variable in the child process. AddEnv :: String -> String -> CmdOption -- | Remove an environment variable from the child process. RemEnv :: String -> CmdOption -- | Add some items to the prefix and suffix of the $PATH -- variable. AddPath :: [String] -> [String] -> CmdOption -- | Given as the stdin of the spawned process. By default the -- stdin is inherited. Stdin :: String -> CmdOption -- | Given as the stdin of the spawned process. StdinBS :: ByteString -> CmdOption -- | Take the stdin from a file. FileStdin :: FilePath -> CmdOption -- | Pass the command to the shell without escaping - any arguments will be -- joined with spaces. By default arguments are escaped properly. Shell :: CmdOption -- | Treat the stdin/stdout/stderr messages as -- binary. By default String results use text encoding and -- ByteString results use binary encoding. BinaryPipes :: CmdOption -- | Name to use with traced, or "" for no tracing. By -- default traces using the name of the executable. Traced :: String -> CmdOption -- | Abort the computation after N seconds, will raise a failure exit code. -- Calls interruptProcessGroupOf and terminateProcess, -- but may sometimes fail to abort the process and not timeout. Timeout :: Double -> CmdOption -- | Should I include the stdout in the exception if the command -- fails? Defaults to False. WithStdout :: Bool -> CmdOption -- | Should I include the stderr in the exception if the command -- fails? Defaults to True. WithStderr :: Bool -> CmdOption -- | Should I echo the stdout? Defaults to True unless a -- Stdout result is required or you use FileStdout. EchoStdout :: Bool -> CmdOption -- | Should I echo the stderr? Defaults to True unless a -- Stderr result is required or you use FileStderr. EchoStderr :: Bool -> CmdOption -- | Should I put the stdout to a file. FileStdout :: FilePath -> CmdOption -- | Should I put the stderr to a file. FileStderr :: FilePath -> CmdOption -- | Compute dependencies automatically. Only works if -- shakeLintInside has been set to the files where autodeps -- might live. AutoDeps :: CmdOption -- | The command the user thinks about, before any munging. Defaults to the -- actual command. UserCommand :: String -> CmdOption -- | Options to fsatrace, a list of strings with characters such -- as "r" (reads) "w" (writes). Defaults to -- "rwmdqt" if the output of fsatrace is required. FSAOptions :: String -> CmdOption -- | Before starting the command in the child process, close all file -- handles except stdin, stdout, stderr in the child process. Uses -- close_fds from package process and comes with the same -- caveats, i.e. runtime is linear with the maximum number of open file -- handles (RLIMIT_NOFILE, see man 2 getrlimit on -- Linux). CloseFileHandles :: CmdOption -- | Don't run the process in its own group. Required when running -- docker. Will mean that process timeouts and asyncronous -- exceptions may not properly clean up child processes. NoProcessGroup :: CmdOption -- | Cause the stdin from the parent to be inherited. Might also require -- NoProcessGroup on Linux. Ignored if you explicitly pass a stdin. InheritStdin :: CmdOption -- | License : MIT Stability : experimental -- -- Cache utilities in Development.Shake lifted to -- MonadAction. module Development.Shake.Plus.Cache -- | Lifted version of newCache using RAction. newCache :: (MonadRules m, MonadReader r m, Eq k, Hashable k) => (k -> RAction r v) -> m (k -> RAction r v) -- | Lifted version of newCacheIO using RAction. newCacheIO :: (MonadIO m, MonadReader r m, Eq k, Hashable k) => (k -> RAction r v) -> m (k -> RAction r v) -- | License : MIT Stability : experimental -- -- Utilities in Development.Shake.Database lifted to -- MonadIO and MonadUnliftIO. module Development.Shake.Plus.Database -- | The type of an open Shake database. Created with -- shakeOpenDatabase or shakeWithDatabase. Used with -- shakeRunDatabase. You may not execute simultaneous calls using -- ShakeDatabase on separate threads (it will raise an error). data ShakeDatabase -- | Lifted shakeOpenDatabase shakeOpenDatabase :: MonadIO m => ShakeOptions -> Rules () -> m (IO ShakeDatabase, IO ()) -- | Unlifted shakeWithDatabase shakeWithDatabase :: MonadUnliftIO m => ShakeOptions -> Rules () -> (ShakeDatabase -> m a) -> m a -- | Lifted shakeOneShotDatabase shakeOneShotDatabase :: MonadIO m => ShakeDatabase -> m () -- | Lifted shakeRunDatabase shakeRunDatabase :: MonadIO m => ShakeDatabase -> [Action a] -> m ([a], [IO ()]) -- | Lifted shakeLiveFilesDatabase shakeLiveFilesDatabase :: MonadIO m => ShakeDatabase -> m [FilePath] -- | Lifted shakeProfileDatabase with well-typed path. shakeProfileDatabase :: MonadIO m => ShakeDatabase -> Path a File -> m () -- | Lifted shakeErrorsDatabase shakeErrorsDatabase :: MonadIO m => ShakeDatabase -> m [(String, SomeException)] -- | Unlifted shakeRunAfter shakeRunAfter :: MonadUnliftIO m => ShakeOptions -> [m ()] -> m () -- | License : MIT Stability : experimental -- -- Directory utilities in Development.Shake lifted to -- MonadAction and FileLike/DirLike. module Development.Shake.Plus.Directory -- | Lifted version of doesFileExist using well-typed Paths. doesFileExist :: (MonadAction m, FileLike b a) => a -> m Bool -- | Lifted version of doesDirectoryExist using well-typed -- Paths. doesDirectoryExist :: (MonadAction m, DirLike b a) => a -> m Bool -- | Lifted version of getDirectoryFiles using well-typed -- Paths. getDirectoryFiles :: (MonadAction m, DirLike b a) => a -> [FilePattern] -> m [Path Rel File] -- | Like getDirectoryFiles, but accepts a Within value and -- returns a Within contaning a list of Paths getDirectoryFilesWithin :: MonadAction m => Within b [FilePattern] -> m (Within b [Path Rel File]) -- | Like getDirectoryFilesWithin, but returns a list of -- Within values instead of a Within` of a list. getDirectoryFilesWithin' :: MonadAction m => Within b [FilePattern] -> m [Within b (Path Rel File)] -- | Lifted version of getDirectoryDirs using well-typed -- Paths. getDirectoryDirs :: (MonadAction m, DirLike b a) => a -> m [Path Rel Dir] -- | Lifted version of getDirectoryFilesIO using well-typed -- Paths. getDirectoryFilesIO :: (MonadIO m, DirLike b a) => a -> [FilePattern] -> m [Path Rel File] -- | Like getDirectoryFilesIO, but accepts a Within value and -- returns a Within contaning a list of Paths getDirectoryFilesWithinIO :: MonadIO m => Within b [FilePattern] -> m (Within b [Path Rel File]) -- | Like getDirectoryFilesWithinIO, but returns a list of -- Within values instead of a Within` of a list. getDirectoryFilesWithinIO' :: MonadIO m => Within b [FilePattern] -> m [Within b (Path Rel File)] -- | License : MIT Stability : experimental -- -- File utilities in Development.Shake lifted to -- MonadAction and FileLike/DirLike. module Development.Shake.Plus.File -- | Lifted version of copyFile that copies between any two -- FileLike. copyFile :: (MonadAction m, FileLike b a, FileLike b' a', Partial) => a -> a' -> m () -- | Like copyFile but for FileLikes that are of the same -- type, useful for type inference. copyFile' :: (MonadAction m, FileLike b a, Partial) => a -> a -> m () -- | Lifted version of copyFileChanged' that copies between two -- FileLike. copyFileChanged :: (MonadAction m, FileLike b a, FileLike b' a', Partial) => a -> a' -> m () -- | Like copyFileChanged but ensures the FileLikes are of -- the same type, useful for type inference. copyFileChanged' :: (MonadAction m, FileLike b a, Partial) => a -> a -> m () -- | Lifted version of readFile' that reads any FileLike. readFile' :: (MonadAction m, FileLike b a, Partial) => a -> m Text -- | Lifted version of readFileLines that reads any FileLike. readFileLines :: (MonadAction m, FileLike b a, Partial) => a -> m [Text] -- | Like readFile', but with an argument for the parent directory. -- Used for symmetry with the way getDirectoryFiles takes -- arguments. readFileIn' :: (MonadAction m, DirLike b d, FileLike Rel a, Partial) => d -> a -> m Text -- | Lifted version of writeFile that writes to any FileLike. writeFile' :: (MonadAction m, FileLike b a, Partial) => a -> Text -> m () -- | Lifted version of writeFileLines that writes to any -- FileLike. writeFileLines :: (MonadAction m, FileLike b a, Partial) => a -> [Text] -> m () -- | Like writeFile', but with an argument for the parent directory. -- Used for symmetry with the way getDirectoryFiles takes -- arguments. writeFileIn' :: (MonadAction m, DirLike b d, FileLike Rel a, Partial) => d -> a -> Text -> m () -- | Lifted version of writeFileChanged that writes to any -- FileLike. writeFileChanged :: (MonadAction m, FileLike b a, Partial) => a -> Text -> m () -- | Like writeFileChanged', but with an argument for the parent -- directory. Used for symmetry with the way getDirectoryFiles -- takes arguments. writeFileChangedIn :: (MonadAction m, DirLike b d, FileLike Rel a, Partial) => d -> a -> Text -> m () -- | Lifted version of removeFiles that accepts any DirLike. removeFiles :: (MonadAction m, DirLike b d) => d -> [FilePattern] -> m () -- | Lifted version of removeFilesAfter that accepts any -- DirLike.. removeFilesAfter :: (MonadAction m, DirLike b d) => d -> [FilePattern] -> m () -- | Class representing a type a that can be compiled down to a -- `Path b File`. class PathLike b File a => FileLike b a toFile :: FileLike b a => a -> Path b File -- | Class repreenting a type a that can be compiled down to a -- `Path b Dir`. class PathLike b Dir a => DirLike b a toDir :: DirLike b a => a -> Path b Dir -- | Like </>, but works for any DirLike and relative -- FileLike to produce a concrete Path. (/>) :: (DirLike b a, FileLike Rel c) => a -> c -> Path b File -- | License : MIT Stability : experimental -- -- Filerules in Development.Shake lifted to MonadAction and -- FileLike/DirLike. module Development.Shake.Plus.FileRules -- | Lifted version of need, This still uses Strings because -- it may refer to a phony rule. For the Path specific version use -- needP need :: (Partial, MonadAction m, Foldable t) => t String -> m () -- | Lifted version of want. This still uses Strings because -- it may refer to a phony rule. For the Path specific version use -- wantP. want :: (Partial, MonadRules m, Foldable t) => t String -> m () -- | Lifted version of need using well-typed Paths needP :: (Partial, MonadAction m, Traversable t, FileLike b a) => t a -> m () -- | Lifted version of want using well-typed Paths wantP :: (Partial, MonadRules m, Traversable t, FileLike b a) => t a -> m () -- | Like needP, but accepts Paths relative to the first -- argument. needIn :: (Partial, MonadAction m, Traversable t, DirLike Rel d, FileLike Rel a) => d -> t a -> m () -- | Like wantP, but accepts Paths relative to the first -- argument. wantIn :: (Partial, MonadRules m, Traversable t, DirLike Rel d, FileLike Rel a) => d -> t a -> m () -- | Like needIn, but accepts a list of Paths inside a -- Within value. needWithin :: (Partial, MonadAction m, Traversable t, FileLike Rel a) => Within Rel (t a) -> m () -- | Like wantIn, but accepts a list of Paths insides a -- Within value. wantWithin :: (Partial, MonadRules m, Traversable t, FileLike Rel a) => Within Rel (t a) -> m () -- | Lifted version of %> using well-typed Paths (%>) :: (Partial, MonadReader r m, MonadRules m) => FilePattern -> (Path Rel File -> RAction r ()) -> m () -- | Lifted version of |%> using well-typed Paths (|%>) :: (Partial, MonadReader r m, MonadRules m) => [FilePattern] -> (Path Rel File -> RAction r ()) -> m () -- | Within variant of `(%>)`, used to keep track of local -- directories. (%^>) :: (Partial, MonadReader r m, MonadRules m) => Within Rel FilePattern -> (Within Rel (Path Rel File) -> RAction r ()) -> m () -- | Within variant of `(%>)`, used to keep track of local -- directories. (|%^>) :: (Partial, MonadReader r m, MonadRules m) => Within Rel [FilePattern] -> (Within Rel (Path Rel File) -> RAction r ()) -> m () -- | Lifted version of phony using RAction phony :: (MonadReader r m, MonadRules m) => String -> RAction r () -> m () -- | License : MIT Stability : experimental -- -- Experimental loaders for shake-plus. Load a collection of -- FilePatterns as a HashMap. module Development.Shake.Plus.Loaders -- | Load a directory of FilePatterns via some loading function. -- This should be a newCache operation that takes full filepaths. batchLoad :: MonadAction m => Path b Dir -> [FilePattern] -> (Path b File -> m a) -> m (HashMap (Path Rel File) a) -- | Like batchLoad, but returns an Within of a Dir -- containing the HashMap batchLoadWithin :: MonadAction m => Within b [FilePattern] -> (Within b (Path Rel File) -> m a) -> m (Within b (HashMap (Path Rel File) a)) -- | Like batchLoadWithin', but returns a HashMap containing -- Within values instead of an Within of a -- Hashmap. batchLoadWithin' :: MonadAction m => Within b [FilePattern] -> (Within b (Path Rel File) -> m a) -> m (HashMap (Within b (Path Rel File)) a) -- | License : MIT Stability : experimental -- -- Oracle utilities in Development.Shake lifted to -- MonadAction and MonadRules. module Development.Shake.Plus.Oracle -- | Lifted version of addOracle using RAction runner. addOracle :: (MonadRules m, MonadReader r m, RuleResult q ~ a, ShakeValue q, ShakeValue a, Partial) => (q -> RAction r a) -> m (q -> RAction r a) -- | Lifted version of addOracleCache using RAction runner. addOracleCache :: (MonadRules m, MonadReader r m, RuleResult q ~ a, ShakeValue q, ShakeValue a, Partial) => (q -> RAction r a) -> m (q -> RAction r a) -- | Lifted version of addOracleHash using RAction runner. addOracleHash :: (MonadRules m, MonadReader r m, RuleResult q ~ a, ShakeValue q, ShakeValue a, Partial) => (q -> RAction r a) -> m (q -> RAction r a) -- | Lifted version of askOracle. askOracle :: (MonadAction m, RuleResult q ~ a, ShakeValue q, ShakeValue a) => q -> m a -- | Lifted version of askOracles. askOracles :: (MonadAction m, RuleResult q ~ a, ShakeValue q, ShakeValue a) => [q] -> m [a] -- | The type mapping between the key or a rule and the resulting -- value. See addBuiltinRule and apply. type family RuleResult key :: Type -- | License : MIT Stability : experimental -- -- Temp utilities in Development.Shake unlifted to -- MonadUnliftAction. module Development.Shake.Plus.Temp -- | Unlifted version of withTempFile with well-typed Path. withTempFile :: (MonadUnliftAction m, MonadThrow m) => (Path Rel File -> m a) -> m a -- | Unlifted version of withTempFile with well-typed Path. withTempDir :: (MonadUnliftAction m, MonadThrow m) => (Path Rel Dir -> m a) -> m a -- | Unlifted version of withTempFileWithin with well-typed -- Paths. withTempFileWithin :: (MonadUnliftAction m, MonadThrow m) => Path b Dir -> (Path Rel File -> m a) -> m a -- | Unlifted version of withTempDirWithin with well-typed -- Paths. withTempDirWithin :: (MonadUnliftAction m, MonadThrow m) => Path b Dir -> (Path Rel Dir -> m a) -> m a -- | License : MIT Stability : experimental -- -- Module exports for Development.Shake.Plus. Re-exports everything in -- this package as well as Path, Path.Like and -- Within. module Development.Shake.Plus -- | License : MIT Stability : experimental -- -- Environenment variable utilities in Development.Shake lifted to -- MonadAction. module Development.Shake.Plus.Env -- | Lifted version of getEnv getEnv :: MonadAction m => String -> m (Maybe String) -- | Lifted version of getEnvWithDefault getEnvWithDefault :: MonadAction m => String -> String -> m String -- | Lifted version of getEnvError getEnvError :: (Partial, MonadAction m) => String -> m String