-- Hoogle documentation, generated by Haddock
-- See Hoogle, http://www.haskell.org/hoogle/
-- | Tools for postgresql-simple.
--
-- A few tools for using postgresql-simple.
@package traction
@version 0.2.1
module Traction.Prelude
-- | The value of seq a b is bottom if a is bottom, and
-- otherwise equal to b. In other words, it evaluates the first
-- argument a to weak head normal form (WHNF). seq is
-- usually introduced to improve performance by avoiding unneeded
-- laziness.
--
-- A note on evaluation order: the expression seq a b does
-- not guarantee that a will be evaluated before
-- b. The only guarantee given by seq is that the both
-- a and b will be evaluated before seq
-- returns a value. In particular, this means that b may be
-- evaluated before a. If you need to guarantee a specific order
-- of evaluation, you must use the function pseq from the
-- "parallel" package.
seq :: () => a -> b -> b
-- | Extract the first component of a pair.
fst :: () => (a, b) -> a
-- | Extract the second component of a pair.
snd :: () => (a, b) -> b
-- | otherwise is defined as the value True. It helps to make
-- guards more readable. eg.
--
--
-- f x | x < 0 = ...
-- | otherwise = ...
--
otherwise :: Bool
-- | Application operator. This operator is redundant, since ordinary
-- application (f x) means the same as (f $ x).
-- However, $ has low, right-associative binding precedence, so it
-- sometimes allows parentheses to be omitted; for example:
--
--
-- f $ g $ h x = f (g (h x))
--
--
-- It is also useful in higher-order situations, such as map
-- ($ 0) xs, or zipWith ($) fs xs.
--
-- Note that ($) is levity-polymorphic in its result type, so
-- that foo $ True where foo :: Bool -> Int# is well-typed
($) :: () => (a -> b) -> a -> b
infixr 0 $
-- | general coercion from integral types
fromIntegral :: (Integral a, Num b) => a -> b
-- | Conditional failure of Alternative computations. Defined by
--
--
-- guard True = pure ()
-- guard False = empty
--
--
-- Examples
--
-- Common uses of guard include conditionally signaling an error
-- in an error monad and conditionally rejecting the current choice in an
-- Alternative-based parser.
--
-- As an example of signaling an error in the error monad Maybe,
-- consider a safe division function safeDiv x y that returns
-- Nothing when the denominator y is zero and
-- Just (x `div` y) otherwise. For example:
--
--
-- >>> safeDiv 4 0
-- Nothing
-- >>> safeDiv 4 2
-- Just 2
--
--
-- A definition of safeDiv using guards, but not guard:
--
--
-- safeDiv :: Int -> Int -> Maybe Int
-- safeDiv x y | y /= 0 = Just (x `div` y)
-- | otherwise = Nothing
--
--
-- A definition of safeDiv using guard and Monad
-- do-notation:
--
--
-- safeDiv :: Int -> Int -> Maybe Int
-- safeDiv x y = do
-- guard (y /= 0)
-- return (x `div` y)
--
guard :: Alternative f => Bool -> f ()
-- | The join function is the conventional monad join operator. It
-- is used to remove one level of monadic structure, projecting its bound
-- argument into the outer level.
--
-- Examples
--
-- A common use of join is to run an IO computation
-- returned from an STM transaction, since STM transactions
-- can't perform IO directly. Recall that
--
--
-- atomically :: STM a -> IO a
--
--
-- is used to run STM transactions atomically. So, by specializing
-- the types of atomically and join to
--
--
-- atomically :: STM (IO b) -> IO (IO b)
-- join :: IO (IO b) -> IO b
--
--
-- we can compose them as
--
--
-- join . atomically :: STM (IO b) -> IO b
--
--
-- to run an STM transaction and the IO action it returns.
join :: Monad m => m (m a) -> m a
-- | The Bounded class is used to name the upper and lower limits of
-- a type. Ord is not a superclass of Bounded since types
-- that are not totally ordered may also have upper and lower bounds.
--
-- The Bounded class may be derived for any enumeration type;
-- minBound is the first constructor listed in the data
-- declaration and maxBound is the last. Bounded may also
-- be derived for single-constructor datatypes whose constituent types
-- are in Bounded.
class Bounded a
minBound :: Bounded a => a
maxBound :: Bounded a => a
-- | Class Enum defines operations on sequentially ordered types.
--
-- The enumFrom... methods are used in Haskell's translation of
-- arithmetic sequences.
--
-- Instances of Enum may be derived for any enumeration type
-- (types whose constructors have no fields). The nullary constructors
-- are assumed to be numbered left-to-right by fromEnum from
-- 0 through n-1. See Chapter 10 of the Haskell
-- Report for more details.
--
-- For any type that is an instance of class Bounded as well as
-- Enum, the following should hold:
--
--
--
--
-- enumFrom x = enumFromTo x maxBound
-- enumFromThen x y = enumFromThenTo x y bound
-- where
-- bound | fromEnum y >= fromEnum x = maxBound
-- | otherwise = minBound
--
class Enum a
-- | The Eq class defines equality (==) and inequality
-- (/=). All the basic datatypes exported by the Prelude
-- are instances of Eq, and Eq may be derived for any
-- datatype whose constituents are also instances of Eq.
--
-- The Haskell Report defines no laws for Eq. However, ==
-- is customarily expected to implement an equivalence relationship where
-- two values comparing equal are indistinguishable by "public"
-- functions, with a "public" function being one not allowing to see
-- implementation details. For example, for a type representing
-- non-normalised natural numbers modulo 100, a "public" function doesn't
-- make the difference between 1 and 201. It is expected to have the
-- following properties:
--
--
-- - Reflexivity x == x = True
-- - Symmetry x == y = y == x
-- - Transitivity if x == y && y == z =
-- True, then x == z = True
-- - Substitutivity if x == y = True and
-- f is a "public" function whose return type is an instance of
-- Eq, then f x == f y = True
-- - Negation x /= y = not (x ==
-- y)
--
--
-- Minimal complete definition: either == or /=.
class Eq a
(==) :: Eq a => a -> a -> Bool
(/=) :: Eq a => a -> a -> Bool
infix 4 ==
infix 4 /=
-- | fractional division
(/) :: Fractional a => a -> a -> a
infixl 7 /
-- | Integral numbers, supporting integer division.
--
-- The Haskell Report defines no laws for Integral. However,
-- Integral instances are customarily expected to define a
-- Euclidean domain and have the following properties for the 'div'/'mod'
-- and 'quot'/'rem' pairs, given suitable Euclidean functions f
-- and g:
--
--
-- - x = y * quot x y + rem x y with rem x y
-- = fromInteger 0 or g (rem x y) < g
-- y
-- - x = y * div x y + mod x y with mod x y
-- = fromInteger 0 or f (mod x y) < f
-- y
--
--
-- An example of a suitable Euclidean function, for Integer's
-- instance, is abs.
class (Real a, Enum a) => Integral a
-- | integer division truncated toward zero
quot :: Integral a => a -> a -> a
-- | integer remainder, satisfying
--
--
-- (x `quot` y)*y + (x `rem` y) == x
--
rem :: Integral a => a -> a -> a
-- | integer division truncated toward negative infinity
div :: Integral a => a -> a -> a
-- | integer modulus, satisfying
--
--
-- (x `div` y)*y + (x `mod` y) == x
--
mod :: Integral a => a -> a -> a
-- | simultaneous quot and rem
quotRem :: Integral a => a -> a -> (a, a)
-- | simultaneous div and mod
divMod :: Integral a => a -> a -> (a, a)
-- | conversion to Integer
toInteger :: Integral a => a -> Integer
infixl 7 `quot`
infixl 7 `rem`
infixl 7 `div`
infixl 7 `mod`
-- | The Monad class defines the basic operations over a
-- monad, a concept from a branch of mathematics known as
-- category theory. From the perspective of a Haskell programmer,
-- however, it is best to think of a monad as an abstract datatype
-- of actions. Haskell's do expressions provide a convenient
-- syntax for writing monadic expressions.
--
-- Instances of Monad should satisfy the following laws:
--
--
--
-- Furthermore, the Monad and Applicative operations should
-- relate as follows:
--
--
--
-- The above laws imply:
--
--
--
-- and that pure and (<*>) satisfy the applicative
-- functor laws.
--
-- The instances of Monad for lists, Maybe and IO
-- defined in the Prelude satisfy these laws.
class Applicative m => Monad (m :: Type -> Type)
-- | Sequentially compose two actions, passing any value produced by the
-- first as an argument to the second.
(>>=) :: Monad m => m a -> (a -> m b) -> m b
-- | Sequentially compose two actions, discarding any value produced by the
-- first, like sequencing operators (such as the semicolon) in imperative
-- languages.
(>>) :: Monad m => m a -> m b -> m b
-- | Inject a value into the monadic type.
return :: Monad m => a -> m a
-- | Fail with a message. This operation is not part of the mathematical
-- definition of a monad, but is invoked on pattern-match failure in a
-- do expression.
--
-- As part of the MonadFail proposal (MFP), this function is moved to its
-- own class MonadFail (see Control.Monad.Fail for more
-- details). The definition here will be removed in a future release.
fail :: Monad m => String -> m a
infixl 1 >>=
infixl 1 >>
-- | The Functor class is used for types that can be mapped over.
-- Instances of Functor should satisfy the following laws:
--
--
-- fmap id == id
-- fmap (f . g) == fmap f . fmap g
--
--
-- The instances of Functor for lists, Maybe and IO
-- satisfy these laws.
class Functor (f :: Type -> Type)
fmap :: Functor f => (a -> b) -> f a -> f b
-- | Replace all locations in the input with the same value. The default
-- definition is fmap . const, but this may be
-- overridden with a more efficient version.
(<$) :: Functor f => a -> f b -> f a
infixl 4 <$
-- | Basic numeric class.
--
-- The Haskell Report defines no laws for Num. However, '(+)' and
-- '(*)' are customarily expected to define a ring and have the following
-- properties:
--
--
-- - Associativity of (+) (x + y) + z = x +
-- (y + z)
-- - Commutativity of (+) x + y = y +
-- x
-- - fromInteger 0 is the additive identity
-- x + fromInteger 0 = x
-- - negate gives the additive inverse x +
-- negate x = fromInteger 0
-- - Associativity of (*) (x * y) * z = x *
-- (y * z)
-- - fromInteger 1 is the multiplicative
-- identity x * fromInteger 1 = x and
-- fromInteger 1 * x = x
-- - Distributivity of (*) with respect to (+) a * (b
-- + c) = (a * b) + (a * c) and (b + c) * a =
-- (b * a) + (c * a)
--
--
-- Note that it isn't customarily expected that a type instance of
-- both Num and Ord implement an ordered ring. Indeed, in
-- base only Integer and Rational do.
class Num a
(+) :: Num a => a -> a -> a
(-) :: Num a => a -> a -> a
(*) :: Num a => a -> a -> a
-- | Unary negation.
negate :: Num a => a -> a
-- | Absolute value.
abs :: Num a => a -> a
-- | Sign of a number. The functions abs and signum should
-- satisfy the law:
--
--
-- abs x * signum x == x
--
--
-- For real numbers, the signum is either -1 (negative),
-- 0 (zero) or 1 (positive).
signum :: Num a => a -> a
-- | Conversion from an Integer. An integer literal represents the
-- application of the function fromInteger to the appropriate
-- value of type Integer, so such literals have type
-- (Num a) => a.
fromInteger :: Num a => Integer -> a
infixl 6 +
infixl 7 *
infixl 6 -
-- | The Ord class is used for totally ordered datatypes.
--
-- Instances of Ord can be derived for any user-defined datatype
-- whose constituent types are in Ord. The declared order of the
-- constructors in the data declaration determines the ordering in
-- derived Ord instances. The Ordering datatype allows a
-- single comparison to determine the precise ordering of two objects.
--
-- The Haskell Report defines no laws for Ord. However,
-- <= is customarily expected to implement a non-strict partial
-- order and have the following properties:
--
--
-- - Transitivity if x <= y && y <=
-- z = True, then x <= z = True
-- - Reflexivity x <= x = True
-- - Antisymmetry if x <= y && y <=
-- x = True, then x == y = True
--
--
-- Note that the following operator interactions are expected to hold:
--
--
-- - x >= y = y <= x
-- - x < y = x <= y && x /= y
-- - x > y = y < x
-- - x < y = compare x y == LT
-- - x > y = compare x y == GT
-- - x == y = compare x y == EQ
-- - min x y == if x <= y then x else y = True
-- - max x y == if x >= y then x else y = True
--
--
-- Minimal complete definition: either compare or <=.
-- Using compare can be more efficient for complex types.
class Eq a => Ord a
compare :: Ord a => a -> a -> Ordering
(<) :: Ord a => a -> a -> Bool
(<=) :: Ord a => a -> a -> Bool
(>) :: Ord a => a -> a -> Bool
(>=) :: Ord a => a -> a -> Bool
max :: Ord a => a -> a -> a
min :: Ord a => a -> a -> a
infix 4 >=
infix 4 >
infix 4 <
infix 4 <=
-- | Parsing of Strings, producing values.
--
-- Derived instances of Read make the following assumptions, which
-- derived instances of Show obey:
--
--
-- - If the constructor is defined to be an infix operator, then the
-- derived Read instance will parse only infix applications of the
-- constructor (not the prefix form).
-- - Associativity is not used to reduce the occurrence of parentheses,
-- although precedence may be.
-- - If the constructor is defined using record syntax, the derived
-- Read will parse only the record-syntax form, and furthermore,
-- the fields must be given in the same order as the original
-- declaration.
-- - The derived Read instance allows arbitrary Haskell
-- whitespace between tokens of the input string. Extra parentheses are
-- also allowed.
--
--
-- For example, given the declarations
--
--
-- infixr 5 :^:
-- data Tree a = Leaf a | Tree a :^: Tree a
--
--
-- the derived instance of Read in Haskell 2010 is equivalent to
--
--
-- instance (Read a) => Read (Tree a) where
--
-- readsPrec d r = readParen (d > app_prec)
-- (\r -> [(Leaf m,t) |
-- ("Leaf",s) <- lex r,
-- (m,t) <- readsPrec (app_prec+1) s]) r
--
-- ++ readParen (d > up_prec)
-- (\r -> [(u:^:v,w) |
-- (u,s) <- readsPrec (up_prec+1) r,
-- (":^:",t) <- lex s,
-- (v,w) <- readsPrec (up_prec+1) t]) r
--
-- where app_prec = 10
-- up_prec = 5
--
--
-- Note that right-associativity of :^: is unused.
--
-- The derived instance in GHC is equivalent to
--
--
-- instance (Read a) => Read (Tree a) where
--
-- readPrec = parens $ (prec app_prec $ do
-- Ident "Leaf" <- lexP
-- m <- step readPrec
-- return (Leaf m))
--
-- +++ (prec up_prec $ do
-- u <- step readPrec
-- Symbol ":^:" <- lexP
-- v <- step readPrec
-- return (u :^: v))
--
-- where app_prec = 10
-- up_prec = 5
--
-- readListPrec = readListPrecDefault
--
--
-- Why do both readsPrec and readPrec exist, and why does
-- GHC opt to implement readPrec in derived Read instances
-- instead of readsPrec? The reason is that readsPrec is
-- based on the ReadS type, and although ReadS is mentioned
-- in the Haskell 2010 Report, it is not a very efficient parser data
-- structure.
--
-- readPrec, on the other hand, is based on a much more efficient
-- ReadPrec datatype (a.k.a "new-style parsers"), but its
-- definition relies on the use of the RankNTypes language
-- extension. Therefore, readPrec (and its cousin,
-- readListPrec) are marked as GHC-only. Nevertheless, it is
-- recommended to use readPrec instead of readsPrec
-- whenever possible for the efficiency improvements it brings.
--
-- As mentioned above, derived Read instances in GHC will
-- implement readPrec instead of readsPrec. The default
-- implementations of readsPrec (and its cousin, readList)
-- will simply use readPrec under the hood. If you are writing a
-- Read instance by hand, it is recommended to write it like so:
--
--
-- instance Read T where
-- readPrec = ...
-- readListPrec = readListPrecDefault
--
class Read a
-- | attempts to parse a value from the front of the string, returning a
-- list of (parsed value, remaining string) pairs. If there is no
-- successful parse, the returned list is empty.
--
-- Derived instances of Read and Show satisfy the
-- following:
--
--
--
-- That is, readsPrec parses the string produced by
-- showsPrec, and delivers the value that showsPrec started
-- with.
readsPrec :: Read a => Int -> ReadS a
-- | The method readList is provided to allow the programmer to give
-- a specialised way of parsing lists of values. For example, this is
-- used by the predefined Read instance of the Char type,
-- where values of type String should be are expected to use
-- double quotes, rather than square brackets.
readList :: Read a => ReadS [a]
-- | Proposed replacement for readsPrec using new-style parsers (GHC
-- only).
readPrec :: Read a => ReadPrec a
-- | Proposed replacement for readList using new-style parsers (GHC
-- only). The default definition uses readList. Instances that
-- define readPrec should also define readListPrec as
-- readListPrecDefault.
readListPrec :: Read a => ReadPrec [a]
-- | Conversion of values to readable Strings.
--
-- Derived instances of Show have the following properties, which
-- are compatible with derived instances of Read:
--
--
-- - The result of show is a syntactically correct Haskell
-- expression containing only constants, given the fixity declarations in
-- force at the point where the type is declared. It contains only the
-- constructor names defined in the data type, parentheses, and spaces.
-- When labelled constructor fields are used, braces, commas, field
-- names, and equal signs are also used.
-- - If the constructor is defined to be an infix operator, then
-- showsPrec will produce infix applications of the
-- constructor.
-- - the representation will be enclosed in parentheses if the
-- precedence of the top-level constructor in x is less than
-- d (associativity is ignored). Thus, if d is
-- 0 then the result is never surrounded in parentheses; if
-- d is 11 it is always surrounded in parentheses,
-- unless it is an atomic expression.
-- - If the constructor is defined using record syntax, then
-- show will produce the record-syntax form, with the fields given
-- in the same order as the original declaration.
--
--
-- For example, given the declarations
--
--
-- infixr 5 :^:
-- data Tree a = Leaf a | Tree a :^: Tree a
--
--
-- the derived instance of Show is equivalent to
--
--
-- instance (Show a) => Show (Tree a) where
--
-- showsPrec d (Leaf m) = showParen (d > app_prec) $
-- showString "Leaf " . showsPrec (app_prec+1) m
-- where app_prec = 10
--
-- showsPrec d (u :^: v) = showParen (d > up_prec) $
-- showsPrec (up_prec+1) u .
-- showString " :^: " .
-- showsPrec (up_prec+1) v
-- where up_prec = 5
--
--
-- Note that right-associativity of :^: is ignored. For example,
--
--
-- - show (Leaf 1 :^: Leaf 2 :^: Leaf 3) produces the
-- string "Leaf 1 :^: (Leaf 2 :^: Leaf 3)".
--
class Show a
-- | Convert a value to a readable String.
--
-- showsPrec should satisfy the law
--
--
-- showsPrec d x r ++ s == showsPrec d x (r ++ s)
--
--
-- Derived instances of Read and Show satisfy the
-- following:
--
--
--
-- That is, readsPrec parses the string produced by
-- showsPrec, and delivers the value that showsPrec started
-- with.
showsPrec :: Show a => Int -> a -> ShowS
-- | A specialised variant of showsPrec, using precedence context
-- zero, and returning an ordinary String.
show :: Show a => a -> String
-- | The method showList is provided to allow the programmer to give
-- a specialised way of showing lists of values. For example, this is
-- used by the predefined Show instance of the Char type,
-- where values of type String should be shown in double quotes,
-- rather than between square brackets.
showList :: Show a => [a] -> ShowS
-- | A functor with application, providing operations to
--
--
-- - embed pure expressions (pure), and
-- - sequence computations and combine their results (<*>
-- and liftA2).
--
--
-- A minimal complete definition must include implementations of
-- pure and of either <*> or liftA2. If it
-- defines both, then they must behave the same as their default
-- definitions:
--
--
-- (<*>) = liftA2 id
--
--
--
-- liftA2 f x y = f <$> x <*> y
--
--
-- Further, any definition must satisfy the following:
--
--
--
-- The other methods have the following default definitions, which may be
-- overridden with equivalent specialized implementations:
--
--
--
-- As a consequence of these laws, the Functor instance for
-- f will satisfy
--
--
--
-- It may be useful to note that supposing
--
--
-- forall x y. p (q x y) = f x . g y
--
--
-- it follows from the above that
--
--
-- liftA2 p (liftA2 q u v) = liftA2 f u . liftA2 g v
--
--
-- If f is also a Monad, it should satisfy
--
--
--
-- (which implies that pure and <*> satisfy the
-- applicative functor laws).
class Functor f => Applicative (f :: Type -> Type)
-- | Lift a value.
pure :: Applicative f => a -> f a
-- | Sequential application.
--
-- A few functors support an implementation of <*> that is
-- more efficient than the default one.
(<*>) :: Applicative f => f (a -> b) -> f a -> f b
-- | Lift a binary function to actions.
--
-- Some functors support an implementation of liftA2 that is more
-- efficient than the default one. In particular, if fmap is an
-- expensive operation, it is likely better to use liftA2 than to
-- fmap over the structure and then use <*>.
liftA2 :: Applicative f => (a -> b -> c) -> f a -> f b -> f c
-- | Sequence actions, discarding the value of the first argument.
(*>) :: Applicative f => f a -> f b -> f b
-- | Sequence actions, discarding the value of the second argument.
(<*) :: Applicative f => f a -> f b -> f a
infixl 4 <*>
infixl 4 *>
infixl 4 <*
-- | Data structures that can be folded.
--
-- For example, given a data type
--
--
-- data Tree a = Empty | Leaf a | Node (Tree a) a (Tree a)
--
--
-- a suitable instance would be
--
--
-- instance Foldable Tree where
-- foldMap f Empty = mempty
-- foldMap f (Leaf x) = f x
-- foldMap f (Node l k r) = foldMap f l `mappend` f k `mappend` foldMap f r
--
--
-- This is suitable even for abstract types, as the monoid is assumed to
-- satisfy the monoid laws. Alternatively, one could define
-- foldr:
--
--
-- instance Foldable Tree where
-- foldr f z Empty = z
-- foldr f z (Leaf x) = f x z
-- foldr f z (Node l k r) = foldr f (f k (foldr f z r)) l
--
--
-- Foldable instances are expected to satisfy the following
-- laws:
--
--
-- foldr f z t = appEndo (foldMap (Endo . f) t ) z
--
--
--
-- foldl f z t = appEndo (getDual (foldMap (Dual . Endo . flip f) t)) z
--
--
--
-- fold = foldMap id
--
--
--
-- length = getSum . foldMap (Sum . const 1)
--
--
-- sum, product, maximum, and minimum
-- should all be essentially equivalent to foldMap forms, such
-- as
--
--
-- sum = getSum . foldMap Sum
--
--
-- but may be less defined.
--
-- If the type is also a Functor instance, it should satisfy
--
--
-- foldMap f = fold . fmap f
--
--
-- which implies that
--
--
-- foldMap f . fmap g = foldMap (f . g)
--
class Foldable (t :: Type -> Type)
-- | Combine the elements of a structure using a monoid.
fold :: (Foldable t, Monoid m) => t m -> m
-- | Map each element of the structure to a monoid, and combine the
-- results.
foldMap :: (Foldable t, Monoid m) => (a -> m) -> t a -> m
-- | Right-associative fold of a structure.
--
-- In the case of lists, foldr, when applied to a binary operator,
-- a starting value (typically the right-identity of the operator), and a
-- list, reduces the list using the binary operator, from right to left:
--
--
-- foldr f z [x1, x2, ..., xn] == x1 `f` (x2 `f` ... (xn `f` z)...)
--
--
-- Note that, since the head of the resulting expression is produced by
-- an application of the operator to the first element of the list,
-- foldr can produce a terminating expression from an infinite
-- list.
--
-- For a general Foldable structure this should be semantically
-- identical to,
--
--
-- foldr f z = foldr f z . toList
--
foldr :: Foldable t => (a -> b -> b) -> b -> t a -> b
-- | Right-associative fold of a structure, but with strict application of
-- the operator.
foldr' :: Foldable t => (a -> b -> b) -> b -> t a -> b
-- | Left-associative fold of a structure.
--
-- In the case of lists, foldl, when applied to a binary operator,
-- a starting value (typically the left-identity of the operator), and a
-- list, reduces the list using the binary operator, from left to right:
--
--
-- foldl f z [x1, x2, ..., xn] == (...((z `f` x1) `f` x2) `f`...) `f` xn
--
--
-- Note that to produce the outermost application of the operator the
-- entire input list must be traversed. This means that foldl'
-- will diverge if given an infinite list.
--
-- Also note that if you want an efficient left-fold, you probably want
-- to use foldl' instead of foldl. The reason for this is
-- that latter does not force the "inner" results (e.g. z f
-- x1 in the above example) before applying them to the operator
-- (e.g. to (f x2)). This results in a thunk chain
-- O(n) elements long, which then must be evaluated from the
-- outside-in.
--
-- For a general Foldable structure this should be semantically
-- identical to,
--
--
-- foldl f z = foldl f z . toList
--
foldl :: Foldable t => (b -> a -> b) -> b -> t a -> b
-- | Left-associative fold of a structure but with strict application of
-- the operator.
--
-- This ensures that each step of the fold is forced to weak head normal
-- form before being applied, avoiding the collection of thunks that
-- would otherwise occur. This is often what you want to strictly reduce
-- a finite list to a single, monolithic result (e.g. length).
--
-- For a general Foldable structure this should be semantically
-- identical to,
--
--
-- foldl f z = foldl' f z . toList
--
foldl' :: Foldable t => (b -> a -> b) -> b -> t a -> b
-- | A variant of foldr that has no base case, and thus may only be
-- applied to non-empty structures.
--
--
-- foldr1 f = foldr1 f . toList
--
foldr1 :: Foldable t => (a -> a -> a) -> t a -> a
-- | A variant of foldl that has no base case, and thus may only be
-- applied to non-empty structures.
--
--
-- foldl1 f = foldl1 f . toList
--
foldl1 :: Foldable t => (a -> a -> a) -> t a -> a
-- | List of elements of a structure, from left to right.
toList :: Foldable t => t a -> [a]
-- | Test whether the structure is empty. The default implementation is
-- optimized for structures that are similar to cons-lists, because there
-- is no general way to do better.
null :: Foldable t => t a -> Bool
-- | Returns the size/length of a finite structure as an Int. The
-- default implementation is optimized for structures that are similar to
-- cons-lists, because there is no general way to do better.
length :: Foldable t => t a -> Int
-- | Does the element occur in the structure?
elem :: (Foldable t, Eq a) => a -> t a -> Bool
-- | The largest element of a non-empty structure.
maximum :: (Foldable t, Ord a) => t a -> a
-- | The least element of a non-empty structure.
minimum :: (Foldable t, Ord a) => t a -> a
-- | The sum function computes the sum of the numbers of a
-- structure.
sum :: (Foldable t, Num a) => t a -> a
-- | The product function computes the product of the numbers of a
-- structure.
product :: (Foldable t, Num a) => t a -> a
infix 4 `elem`
-- | Functors representing data structures that can be traversed from left
-- to right.
--
-- A definition of traverse must satisfy the following laws:
--
--
--
-- A definition of sequenceA must satisfy the following laws:
--
--
--
-- where an applicative transformation is a function
--
--
-- t :: (Applicative f, Applicative g) => f a -> g a
--
--
-- preserving the Applicative operations, i.e.
--
--
--
-- and the identity functor Identity and composition of functors
-- Compose are defined as
--
--
-- newtype Identity a = Identity a
--
-- instance Functor Identity where
-- fmap f (Identity x) = Identity (f x)
--
-- instance Applicative Identity where
-- pure x = Identity x
-- Identity f <*> Identity x = Identity (f x)
--
-- newtype Compose f g a = Compose (f (g a))
--
-- instance (Functor f, Functor g) => Functor (Compose f g) where
-- fmap f (Compose x) = Compose (fmap (fmap f) x)
--
-- instance (Applicative f, Applicative g) => Applicative (Compose f g) where
-- pure x = Compose (pure (pure x))
-- Compose f <*> Compose x = Compose ((<*>) <$> f <*> x)
--
--
-- (The naturality law is implied by parametricity.)
--
-- Instances are similar to Functor, e.g. given a data type
--
--
-- data Tree a = Empty | Leaf a | Node (Tree a) a (Tree a)
--
--
-- a suitable instance would be
--
--
-- instance Traversable Tree where
-- traverse f Empty = pure Empty
-- traverse f (Leaf x) = Leaf <$> f x
-- traverse f (Node l k r) = Node <$> traverse f l <*> f k <*> traverse f r
--
--
-- This is suitable even for abstract types, as the laws for
-- <*> imply a form of associativity.
--
-- The superclass instances should satisfy the following:
--
--
-- - In the Functor instance, fmap should be equivalent
-- to traversal with the identity applicative functor
-- (fmapDefault).
-- - In the Foldable instance, foldMap should be
-- equivalent to traversal with a constant applicative functor
-- (foldMapDefault).
--
class (Functor t, Foldable t) => Traversable (t :: Type -> Type)
-- | Map each element of a structure to an action, evaluate these actions
-- from left to right, and collect the results. For a version that
-- ignores the results see traverse_.
traverse :: (Traversable t, Applicative f) => (a -> f b) -> t a -> f (t b)
-- | Evaluate each action in the structure from left to right, and collect
-- the results. For a version that ignores the results see
-- sequenceA_.
sequenceA :: (Traversable t, Applicative f) => t (f a) -> f (t a)
-- | Map each element of a structure to a monadic action, evaluate these
-- actions from left to right, and collect the results. For a version
-- that ignores the results see mapM_.
mapM :: (Traversable t, Monad m) => (a -> m b) -> t a -> m (t b)
-- | Evaluate each monadic action in the structure from left to right, and
-- collect the results. For a version that ignores the results see
-- sequence_.
sequence :: (Traversable t, Monad m) => t (m a) -> m (t a)
-- | An associative operation.
(<>) :: Semigroup a => a -> a -> a
infixr 6 <>
-- | The class of monoids (types with an associative binary operation that
-- has an identity). Instances should satisfy the following laws:
--
--
--
-- The method names refer to the monoid of lists under concatenation, but
-- there are many other instances.
--
-- Some types can be viewed as a monoid in more than one way, e.g. both
-- addition and multiplication on numbers. In such cases we often define
-- newtypes and make those instances of Monoid, e.g.
-- Sum and Product.
--
-- NOTE: Semigroup is a superclass of Monoid since
-- base-4.11.0.0.
class Semigroup a => Monoid a
-- | Identity of mappend
mempty :: Monoid a => a
-- | An associative operation
--
-- NOTE: This method is redundant and has the default
-- implementation mappend = '(<>)' since
-- base-4.11.0.0.
mappend :: Monoid a => a -> a -> a
-- | Fold a list using the monoid.
--
-- For most types, the default definition for mconcat will be
-- used, but the function is included in the class definition so that an
-- optimized version can be provided for specific types.
mconcat :: Monoid a => [a] -> a
data Bool
False :: Bool
True :: Bool
-- | The character type Char is an enumeration whose values
-- represent Unicode (or equivalently ISO/IEC 10646) code points (i.e.
-- characters, see http://www.unicode.org/ for details). This set
-- extends the ISO 8859-1 (Latin-1) character set (the first 256
-- characters), which is itself an extension of the ASCII character set
-- (the first 128 characters). A character literal in Haskell has type
-- Char.
--
-- To convert a Char to or from the corresponding Int value
-- defined by Unicode, use toEnum and fromEnum from the
-- Enum class respectively (or equivalently ord and
-- chr).
data Char
-- | Double-precision floating point numbers. It is desirable that this
-- type be at least equal in range and precision to the IEEE
-- double-precision type.
data Double
-- | A fixed-precision integer type with at least the range [-2^29 ..
-- 2^29-1]. The exact range for a given implementation can be
-- determined by using minBound and maxBound from the
-- Bounded class.
data Int
-- | 8-bit signed integer type
data Int8
-- | 16-bit signed integer type
data Int16
-- | 32-bit signed integer type
data Int32
-- | 64-bit signed integer type
data Int64
-- | The Maybe type encapsulates an optional value. A value of type
-- Maybe a either contains a value of type a
-- (represented as Just a), or it is empty (represented
-- as Nothing). Using Maybe is a good way to deal with
-- errors or exceptional cases without resorting to drastic measures such
-- as error.
--
-- The Maybe type is also a monad. It is a simple kind of error
-- monad, where all errors are represented by Nothing. A richer
-- error monad can be built using the Either type.
data Maybe a
Nothing :: Maybe a
Just :: a -> Maybe a
-- | The Either type represents values with two possibilities: a
-- value of type Either a b is either Left
-- a or Right b.
--
-- The Either type is sometimes used to represent a value which is
-- either correct or an error; by convention, the Left constructor
-- is used to hold an error value and the Right constructor is
-- used to hold a correct value (mnemonic: "right" also means "correct").
--
-- Examples
--
-- The type Either String Int is the type
-- of values which can be either a String or an Int. The
-- Left constructor can be used only on Strings, and the
-- Right constructor can be used only on Ints:
--
--
-- >>> let s = Left "foo" :: Either String Int
--
-- >>> s
-- Left "foo"
--
-- >>> let n = Right 3 :: Either String Int
--
-- >>> n
-- Right 3
--
-- >>> :type s
-- s :: Either String Int
--
-- >>> :type n
-- n :: Either String Int
--
--
-- The fmap from our Functor instance will ignore
-- Left values, but will apply the supplied function to values
-- contained in a Right:
--
--
-- >>> let s = Left "foo" :: Either String Int
--
-- >>> let n = Right 3 :: Either String Int
--
-- >>> fmap (*2) s
-- Left "foo"
--
-- >>> fmap (*2) n
-- Right 6
--
--
-- The Monad instance for Either allows us to chain
-- together multiple actions which may fail, and fail overall if any of
-- the individual steps failed. First we'll write a function that can
-- either parse an Int from a Char, or fail.
--
--
-- >>> import Data.Char ( digitToInt, isDigit )
--
-- >>> :{
-- let parseEither :: Char -> Either String Int
-- parseEither c
-- | isDigit c = Right (digitToInt c)
-- | otherwise = Left "parse error"
--
-- >>> :}
--
--
-- The following should work, since both '1' and '2'
-- can be parsed as Ints.
--
--
-- >>> :{
-- let parseMultiple :: Either String Int
-- parseMultiple = do
-- x <- parseEither '1'
-- y <- parseEither '2'
-- return (x + y)
--
-- >>> :}
--
--
--
-- >>> parseMultiple
-- Right 3
--
--
-- But the following should fail overall, since the first operation where
-- we attempt to parse 'm' as an Int will fail:
--
--
-- >>> :{
-- let parseMultiple :: Either String Int
-- parseMultiple = do
-- x <- parseEither 'm'
-- y <- parseEither '2'
-- return (x + y)
--
-- >>> :}
--
--
--
-- >>> parseMultiple
-- Left "parse error"
--
data Either a b
Left :: a -> Either a b
Right :: b -> Either a b
-- | An infix synonym for fmap.
--
-- The name of this operator is an allusion to $. Note the
-- similarities between their types:
--
--
-- ($) :: (a -> b) -> a -> b
-- (<$>) :: Functor f => (a -> b) -> f a -> f b
--
--
-- Whereas $ is function application, <$> is
-- function application lifted over a Functor.
--
-- Examples
--
-- Convert from a Maybe Int to a
-- Maybe String using show:
--
--
-- >>> show <$> Nothing
-- Nothing
--
-- >>> show <$> Just 3
-- Just "3"
--
--
-- Convert from an Either Int Int to
-- an Either Int String using
-- show:
--
--
-- >>> show <$> Left 17
-- Left 17
--
-- >>> show <$> Right 17
-- Right "17"
--
--
-- Double each element of a list:
--
--
-- >>> (*2) <$> [1,2,3]
-- [2,4,6]
--
--
-- Apply even to the second element of a pair:
--
--
-- >>> even <$> (2,2)
-- (2,True)
--
(<$>) :: Functor f => (a -> b) -> f a -> f b
infixl 4 <$>
-- | const x is a unary function which evaluates to x for
-- all inputs.
--
--
-- >>> const 42 "hello"
-- 42
--
--
--
-- >>> map (const 42) [0..3]
-- [42,42,42,42]
--
const :: () => a -> b -> a
-- | Function composition.
(.) :: () => (b -> c) -> (a -> b) -> a -> c
infixr 9 .
-- | Identity function.
--
--
-- id x = x
--
id :: () => a -> a
-- | A monoid on applicative functors.
--
-- If defined, some and many should be the least solutions
-- of the equations:
--
--
class Applicative f => Alternative (f :: Type -> Type)
-- | The identity of <|>
empty :: Alternative f => f a
-- | An associative binary operation
(<|>) :: Alternative f => f a -> f a -> f a
-- | One or more.
some :: Alternative f => f a -> f [a]
-- | Zero or more.
many :: Alternative f => f a -> f [a]
infixl 3 <|>
-- | Monads that also support choice and failure.
class (Alternative m, Monad m) => MonadPlus (m :: Type -> Type)
-- | The identity of mplus. It should also satisfy the equations
--
--
-- mzero >>= f = mzero
-- v >> mzero = mzero
--
--
-- The default definition is
--
--
-- mzero = empty
--
mzero :: MonadPlus m => m a
-- | An associative operation. The default definition is
--
--
-- mplus = (<|>)
--
mplus :: MonadPlus m => m a -> m a -> m a
-- | A bifunctor is a type constructor that takes two type arguments and is
-- a functor in both arguments. That is, unlike with
-- Functor, a type constructor such as Either does not need
-- to be partially applied for a Bifunctor instance, and the
-- methods in this class permit mapping functions over the Left
-- value or the Right value, or both at the same time.
--
-- Formally, the class Bifunctor represents a bifunctor from
-- Hask -> Hask.
--
-- Intuitively it is a bifunctor where both the first and second
-- arguments are covariant.
--
-- You can define a Bifunctor by either defining bimap or
-- by defining both first and second.
--
-- If you supply bimap, you should ensure that:
--
--
-- bimap id id ≡ id
--
--
-- If you supply first and second, ensure:
--
--
-- first id ≡ id
-- second id ≡ id
--
--
-- If you supply both, you should also ensure:
--
--
-- bimap f g ≡ first f . second g
--
--
-- These ensure by parametricity:
--
--
-- bimap (f . g) (h . i) ≡ bimap f h . bimap g i
-- first (f . g) ≡ first f . first g
-- second (f . g) ≡ second f . second g
--
class Bifunctor (p :: Type -> Type -> Type)
-- | Map over both arguments at the same time.
--
--
-- bimap f g ≡ first f . second g
--
--
-- Examples
--
--
-- >>> bimap toUpper (+1) ('j', 3)
-- ('J',4)
--
--
--
-- >>> bimap toUpper (+1) (Left 'j')
-- Left 'J'
--
--
--
-- >>> bimap toUpper (+1) (Right 3)
-- Right 4
--
bimap :: Bifunctor p => (a -> b) -> (c -> d) -> p a c -> p b d
-- | Map covariantly over the first argument.
--
--
-- first f ≡ bimap f id
--
--
-- Examples
--
--
-- >>> first toUpper ('j', 3)
-- ('J',3)
--
--
--
-- >>> first toUpper (Left 'j')
-- Left 'J'
--
first :: Bifunctor p => (a -> b) -> p a c -> p b c
-- | Map covariantly over the second argument.
--
--
-- second ≡ bimap id
--
--
-- Examples
--
--
-- >>> second (+1) ('j', 3)
-- ('j',4)
--
--
--
-- >>> second (+1) (Right 3)
-- Right 4
--
second :: Bifunctor p => (b -> c) -> p a b -> p a c
-- | Direct MonadPlus equivalent of filter.
--
-- Examples
--
-- The filter function is just mfilter specialized to the
-- list monad:
--
--
-- filter = ( mfilter :: (a -> Bool) -> [a] -> [a] )
--
--
-- An example using mfilter with the Maybe monad:
--
--
-- >>> mfilter odd (Just 1)
-- Just 1
-- >>> mfilter odd (Just 2)
-- Nothing
--
mfilter :: MonadPlus m => (a -> Bool) -> m a -> m a
-- | Strict version of <$>.
(<$!>) :: Monad m => (a -> b) -> m a -> m b
infixl 4 <$!>
-- | The reverse of when.
unless :: Applicative f => Bool -> f () -> f ()
-- | Like replicateM, but discards the result.
replicateM_ :: Applicative m => Int -> m a -> m ()
-- | replicateM n act performs the action n times,
-- gathering the results.
replicateM :: Applicative m => Int -> m a -> m [a]
-- | Like foldM, but discards the result.
foldM_ :: (Foldable t, Monad m) => (b -> a -> m b) -> b -> t a -> m ()
-- | The foldM function is analogous to foldl, except that
-- its result is encapsulated in a monad. Note that foldM works
-- from left-to-right over the list arguments. This could be an issue
-- where (>>) and the `folded function' are not
-- commutative.
--
--
-- foldM f a1 [x1, x2, ..., xm]
--
-- ==
--
-- do
-- a2 <- f a1 x1
-- a3 <- f a2 x2
-- ...
-- f am xm
--
--
-- If right-to-left evaluation is required, the input list should be
-- reversed.
--
-- Note: foldM is the same as foldlM
foldM :: (Foldable t, Monad m) => (b -> a -> m b) -> b -> t a -> m b
-- | zipWithM_ is the extension of zipWithM which ignores the
-- final result.
zipWithM_ :: Applicative m => (a -> b -> m c) -> [a] -> [b] -> m ()
-- | The zipWithM function generalizes zipWith to arbitrary
-- applicative functors.
zipWithM :: Applicative m => (a -> b -> m c) -> [a] -> [b] -> m [c]
-- | The mapAndUnzipM function maps its first argument over a list,
-- returning the result as a pair of lists. This function is mainly used
-- with complicated data structures or a state-transforming monad.
mapAndUnzipM :: Applicative m => (a -> m (b, c)) -> [a] -> m ([b], [c])
-- | Repeat an action indefinitely.
--
-- Examples
--
-- A common use of forever is to process input from network
-- sockets, Handles, and channels (e.g. MVar and
-- Chan).
--
-- For example, here is how we might implement an echo server,
-- using forever both to listen for client connections on a
-- network socket and to echo client input on client connection handles:
--
--
-- echoServer :: Socket -> IO ()
-- echoServer socket = forever $ do
-- client <- accept socket
-- forkFinally (echo client) (\_ -> hClose client)
-- where
-- echo :: Handle -> IO ()
-- echo client = forever $
-- hGetLine client >>= hPutStrLn client
--
forever :: Applicative f => f a -> f b
-- | Right-to-left composition of Kleisli arrows.
-- (>=>), with the arguments flipped.
--
-- Note how this operator resembles function composition
-- (.):
--
--
-- (.) :: (b -> c) -> (a -> b) -> a -> c
-- (<=<) :: Monad m => (b -> m c) -> (a -> m b) -> a -> m c
--
(<=<) :: Monad m => (b -> m c) -> (a -> m b) -> a -> m c
infixr 1 <=<
-- | Left-to-right composition of Kleisli arrows.
(>=>) :: Monad m => (a -> m b) -> (b -> m c) -> a -> m c
infixr 1 >=>
-- | This generalizes the list-based filter function.
filterM :: Applicative m => (a -> m Bool) -> [a] -> m [a]
-- | This function may be used as a value for foldMap in a
-- Foldable instance.
--
--
-- foldMapDefault f ≡ getConst . traverse (Const . f)
--
foldMapDefault :: (Traversable t, Monoid m) => (a -> m) -> t a -> m
-- | This function may be used as a value for fmap in a
-- Functor instance, provided that traverse is defined.
-- (Using fmapDefault with a Traversable instance defined
-- only by sequenceA will result in infinite recursion.)
--
--
-- fmapDefault f ≡ runIdentity . traverse (Identity . f)
--
fmapDefault :: Traversable t => (a -> b) -> t a -> t b
-- | The mapAccumR function behaves like a combination of
-- fmap and foldr; it applies a function to each element
-- of a structure, passing an accumulating parameter from right to left,
-- and returning a final value of this accumulator together with the new
-- structure.
mapAccumR :: Traversable t => (a -> b -> (a, c)) -> a -> t b -> (a, t c)
-- | The mapAccumL function behaves like a combination of
-- fmap and foldl; it applies a function to each element
-- of a structure, passing an accumulating parameter from left to right,
-- and returning a final value of this accumulator together with the new
-- structure.
mapAccumL :: Traversable t => (a -> b -> (a, c)) -> a -> t b -> (a, t c)
-- | forM is mapM with its arguments flipped. For a version
-- that ignores the results see forM_.
forM :: (Traversable t, Monad m) => t a -> (a -> m b) -> m (t b)
-- | for is traverse with its arguments flipped. For a
-- version that ignores the results see for_.
for :: (Traversable t, Applicative f) => t a -> (a -> f b) -> f (t b)
-- | One or none.
optional :: Alternative f => f a -> f (Maybe a)
newtype WrappedMonad (m :: Type -> Type) a
WrapMonad :: m a -> WrappedMonad a
[unwrapMonad] :: WrappedMonad a -> m a
newtype WrappedArrow (a :: Type -> Type -> Type) b c
WrapArrow :: a b c -> WrappedArrow b c
[unwrapArrow] :: WrappedArrow b c -> a b c
-- | Lists, but with an Applicative functor based on zipping.
newtype ZipList a
ZipList :: [a] -> ZipList a
[getZipList] :: ZipList a -> [a]
-- | The Const functor.
newtype Const a (b :: k) :: forall k. () => Type -> k -> Type
Const :: a -> Const a
[getConst] :: Const a -> a
-- | The find function takes a predicate and a structure and returns
-- the leftmost element of the structure matching the predicate, or
-- Nothing if there is no such element.
find :: Foldable t => (a -> Bool) -> t a -> Maybe a
-- | notElem is the negation of elem.
notElem :: (Foldable t, Eq a) => a -> t a -> Bool
infix 4 `notElem`
-- | The least element of a non-empty structure with respect to the given
-- comparison function.
minimumBy :: Foldable t => (a -> a -> Ordering) -> t a -> a
-- | The largest element of a non-empty structure with respect to the given
-- comparison function.
maximumBy :: Foldable t => (a -> a -> Ordering) -> t a -> a
-- | Determines whether all elements of the structure satisfy the
-- predicate.
all :: Foldable t => (a -> Bool) -> t a -> Bool
-- | Determines whether any element of the structure satisfies the
-- predicate.
any :: Foldable t => (a -> Bool) -> t a -> Bool
-- | or returns the disjunction of a container of Bools. For the
-- result to be False, the container must be finite; True,
-- however, results from a True value finitely far from the left
-- end.
or :: Foldable t => t Bool -> Bool
-- | and returns the conjunction of a container of Bools. For the
-- result to be True, the container must be finite; False,
-- however, results from a False value finitely far from the left
-- end.
and :: Foldable t => t Bool -> Bool
-- | Map a function over all the elements of a container and concatenate
-- the resulting lists.
concatMap :: Foldable t => (a -> [b]) -> t a -> [b]
-- | The concatenation of all the elements of a container of lists.
concat :: Foldable t => t [a] -> [a]
-- | The sum of a collection of actions, generalizing concat. As of
-- base 4.8.0.0, msum is just asum, specialized to
-- MonadPlus.
msum :: (Foldable t, MonadPlus m) => t (m a) -> m a
-- | The sum of a collection of actions, generalizing concat.
--
-- asum [Just Hello, Nothing, Just World] Just Hello
asum :: (Foldable t, Alternative f) => t (f a) -> f a
-- | Evaluate each monadic action in the structure from left to right, and
-- ignore the results. For a version that doesn't ignore the results see
-- sequence.
--
-- As of base 4.8.0.0, sequence_ is just sequenceA_,
-- specialized to Monad.
sequence_ :: (Foldable t, Monad m) => t (m a) -> m ()
-- | Evaluate each action in the structure from left to right, and ignore
-- the results. For a version that doesn't ignore the results see
-- sequenceA.
sequenceA_ :: (Foldable t, Applicative f) => t (f a) -> f ()
-- | forM_ is mapM_ with its arguments flipped. For a version
-- that doesn't ignore the results see forM.
--
-- As of base 4.8.0.0, forM_ is just for_, specialized to
-- Monad.
forM_ :: (Foldable t, Monad m) => t a -> (a -> m b) -> m ()
-- | Map each element of a structure to a monadic action, evaluate these
-- actions from left to right, and ignore the results. For a version that
-- doesn't ignore the results see mapM.
--
-- As of base 4.8.0.0, mapM_ is just traverse_, specialized
-- to Monad.
mapM_ :: (Foldable t, Monad m) => (a -> m b) -> t a -> m ()
-- | for_ is traverse_ with its arguments flipped. For a
-- version that doesn't ignore the results see for.
--
--
-- >>> for_ [1..4] print
-- 1
-- 2
-- 3
-- 4
--
for_ :: (Foldable t, Applicative f) => t a -> (a -> f b) -> f ()
-- | Map each element of a structure to an action, evaluate these actions
-- from left to right, and ignore the results. For a version that doesn't
-- ignore the results see traverse.
traverse_ :: (Foldable t, Applicative f) => (a -> f b) -> t a -> f ()
-- | Monadic fold over the elements of a structure, associating to the
-- left, i.e. from left to right.
foldlM :: (Foldable t, Monad m) => (b -> a -> m b) -> b -> t a -> m b
-- | Monadic fold over the elements of a structure, associating to the
-- right, i.e. from right to left.
foldrM :: (Foldable t, Monad m) => (a -> b -> m b) -> b -> t a -> m b
-- | Parse a string using the Read instance. Succeeds if there is
-- exactly one valid result.
--
--
-- >>> readMaybe "123" :: Maybe Int
-- Just 123
--
--
--
-- >>> readMaybe "hello" :: Maybe Int
-- Nothing
--
readMaybe :: Read a => String -> Maybe a
-- | Case analysis for the Either type. If the value is
-- Left a, apply the first function to a; if it
-- is Right b, apply the second function to b.
--
-- Examples
--
-- We create two values of type Either String
-- Int, one using the Left constructor and another
-- using the Right constructor. Then we apply "either" the
-- length function (if we have a String) or the
-- "times-two" function (if we have an Int):
--
--
-- >>> let s = Left "foo" :: Either String Int
--
-- >>> let n = Right 3 :: Either String Int
--
-- >>> either length (*2) s
-- 3
--
-- >>> either length (*2) n
-- 6
--
either :: () => (a -> c) -> (b -> c) -> Either a b -> c
-- | Case analysis for the Bool type. bool x y p
-- evaluates to x when p is False, and evaluates
-- to y when p is True.
--
-- This is equivalent to if p then y else x; that is, one can
-- think of it as an if-then-else construct with its arguments reordered.
--
-- Examples
--
-- Basic usage:
--
--
-- >>> bool "foo" "bar" True
-- "bar"
--
-- >>> bool "foo" "bar" False
-- "foo"
--
--
-- Confirm that bool x y p and if p then y else
-- x are equivalent:
--
--
-- >>> let p = True; x = "bar"; y = "foo"
--
-- >>> bool x y p == if p then y else x
-- True
--
-- >>> let p = False
--
-- >>> bool x y p == if p then y else x
-- True
--
bool :: () => a -> a -> Bool -> a
-- | & is a reverse application operator. This provides
-- notational convenience. Its precedence is one higher than that of the
-- forward application operator $, which allows & to be
-- nested in $.
--
--
-- >>> 5 & (+1) & show
-- "6"
--
(&) :: () => a -> (a -> b) -> b
infixl 1 &
-- | void value discards or ignores the result of
-- evaluation, such as the return value of an IO action.
--
-- Examples
--
-- Replace the contents of a Maybe Int with
-- unit:
--
--
-- >>> void Nothing
-- Nothing
--
-- >>> void (Just 3)
-- Just ()
--
--
-- Replace the contents of an Either Int
-- Int with unit, resulting in an Either
-- Int '()':
--
--
-- >>> void (Left 8675309)
-- Left 8675309
--
-- >>> void (Right 8675309)
-- Right ()
--
--
-- Replace every element of a list with unit:
--
--
-- >>> void [1,2,3]
-- [(),(),()]
--
--
-- Replace the second element of a pair with unit:
--
--
-- >>> void (1,2)
-- (1,())
--
--
-- Discard the result of an IO action:
--
--
-- >>> mapM print [1,2]
-- 1
-- 2
-- [(),()]
--
-- >>> void $ mapM print [1,2]
-- 1
-- 2
--
void :: Functor f => f a -> f ()
-- | Flipped version of <$.
--
-- Examples
--
-- Replace the contents of a Maybe Int with a
-- constant String:
--
--
-- >>> Nothing $> "foo"
-- Nothing
--
-- >>> Just 90210 $> "foo"
-- Just "foo"
--
--
-- Replace the contents of an Either Int
-- Int with a constant String, resulting in an
-- Either Int String:
--
--
-- >>> Left 8675309 $> "foo"
-- Left 8675309
--
-- >>> Right 8675309 $> "foo"
-- Right "foo"
--
--
-- Replace each element of a list with a constant String:
--
--
-- >>> [1,2,3] $> "foo"
-- ["foo","foo","foo"]
--
--
-- Replace the second element of a pair with a constant String:
--
--
-- >>> (1,2) $> "foo"
-- (1,"foo")
--
($>) :: Functor f => f a -> b -> f b
infixl 4 $>
-- | raise a number to a non-negative integral power
(^) :: (Num a, Integral b) => a -> b -> a
infixr 8 ^
-- | The fromMaybe function takes a default value and and
-- Maybe value. If the Maybe is Nothing, it returns
-- the default values; otherwise, it returns the value contained in the
-- Maybe.
--
-- Examples
--
-- Basic usage:
--
--
-- >>> fromMaybe "" (Just "Hello, World!")
-- "Hello, World!"
--
--
--
-- >>> fromMaybe "" Nothing
-- ""
--
--
-- Read an integer from a string using readMaybe. If we fail to
-- parse an integer, we want to return 0 by default:
--
--
-- >>> import Text.Read ( readMaybe )
--
-- >>> fromMaybe 0 (readMaybe "5")
-- 5
--
-- >>> fromMaybe 0 (readMaybe "")
-- 0
--
fromMaybe :: () => a -> Maybe a -> a
-- | The maybe function takes a default value, a function, and a
-- Maybe value. If the Maybe value is Nothing, the
-- function returns the default value. Otherwise, it applies the function
-- to the value inside the Just and returns the result.
--
-- Examples
--
-- Basic usage:
--
--
-- >>> maybe False odd (Just 3)
-- True
--
--
--
-- >>> maybe False odd Nothing
-- False
--
--
-- Read an integer from a string using readMaybe. If we succeed,
-- return twice the integer; that is, apply (*2) to it. If
-- instead we fail to parse an integer, return 0 by default:
--
--
-- >>> import Text.Read ( readMaybe )
--
-- >>> maybe 0 (*2) (readMaybe "5")
-- 10
--
-- >>> maybe 0 (*2) (readMaybe "")
-- 0
--
--
-- Apply show to a Maybe Int. If we have Just
-- n, we want to show the underlying Int n. But if
-- we have Nothing, we return the empty string instead of (for
-- example) "Nothing":
--
--
-- >>> maybe "" show (Just 5)
-- "5"
--
-- >>> maybe "" show Nothing
-- ""
--
maybe :: () => b -> (a -> b) -> Maybe a -> b
-- | flip f takes its (first) two arguments in the reverse
-- order of f.
--
--
-- >>> flip (++) "hello" "world"
-- "worldhello"
--
flip :: () => (a -> b -> c) -> b -> a -> c
-- | In many situations, the liftM operations can be replaced by
-- uses of ap, which promotes function application.
--
--
-- return f `ap` x1 `ap` ... `ap` xn
--
--
-- is equivalent to
--
--
-- liftMn f x1 x2 ... xn
--
ap :: Monad m => m (a -> b) -> m a -> m b
-- | Promote a function to a monad, scanning the monadic arguments from
-- left to right (cf. liftM2).
liftM5 :: Monad m => (a1 -> a2 -> a3 -> a4 -> a5 -> r) -> m a1 -> m a2 -> m a3 -> m a4 -> m a5 -> m r
-- | Promote a function to a monad, scanning the monadic arguments from
-- left to right (cf. liftM2).
liftM4 :: Monad m => (a1 -> a2 -> a3 -> a4 -> r) -> m a1 -> m a2 -> m a3 -> m a4 -> m r
-- | Promote a function to a monad, scanning the monadic arguments from
-- left to right (cf. liftM2).
liftM3 :: Monad m => (a1 -> a2 -> a3 -> r) -> m a1 -> m a2 -> m a3 -> m r
-- | Promote a function to a monad, scanning the monadic arguments from
-- left to right. For example,
--
--
-- liftM2 (+) [0,1] [0,2] = [0,2,1,3]
-- liftM2 (+) (Just 1) Nothing = Nothing
--
liftM2 :: Monad m => (a1 -> a2 -> r) -> m a1 -> m a2 -> m r
-- | Promote a function to a monad.
liftM :: Monad m => (a1 -> r) -> m a1 -> m r
-- | Conditional execution of Applicative expressions. For example,
--
--
-- when debug (putStrLn "Debugging")
--
--
-- will output the string Debugging if the Boolean value
-- debug is True, and otherwise do nothing.
when :: Applicative f => Bool -> f () -> f ()
-- | Same as >>=, but with the arguments interchanged.
(=<<) :: Monad m => (a -> m b) -> m a -> m b
infixr 1 =<<
-- | Lift a ternary function to actions.
liftA3 :: Applicative f => (a -> b -> c -> d) -> f a -> f b -> f c -> f d
-- | Lift a function to actions. This function may be used as a value for
-- fmap in a Functor instance.
liftA :: Applicative f => (a -> b) -> f a -> f b
-- | A variant of <*> with the arguments reversed.
(<**>) :: Applicative f => f a -> f (a -> b) -> f b
infixl 4 <**>
-- | error stops execution and displays an error message.
error :: HasCallStack => [Char] -> a
-- | Boolean "and"
(&&) :: Bool -> Bool -> Bool
infixr 3 &&
-- | Boolean "or"
(||) :: Bool -> Bool -> Bool
infixr 2 ||
-- | Boolean "not"
not :: Bool -> Bool
-- | Hoist
hoistEitherT :: () => (forall b. () => m b -> n b) -> EitherT x m a -> EitherT x n a
-- | Hoist a 'Maybe a' into a 'Right a'
hoistMaybe :: Monad m => x -> Maybe a -> EitherT x m a
-- | Map the Right unwrapped computation using the given function.
secondEitherT :: Functor m => (a -> b) -> EitherT x m a -> EitherT x m b
-- | Map the Left unwrapped computation using the given function.
firstEitherT :: Functor m => (x -> y) -> EitherT x m a -> EitherT y m a
-- | Map the unwrapped computation using the given function.
bimapEitherT :: Functor m => (x -> y) -> (a -> b) -> EitherT x m a -> EitherT y m b
-- | Hoist an Either into an "EitherT m"
hoistEither :: Monad m => Either x a -> EitherT x m a
mapEitherT :: () => (m (Either x a) -> n (Either y b)) -> EitherT x m a -> EitherT y n b
-- | Constructor for right computations.
right :: Monad m => a -> EitherT x m a
-- | Constructor for left computations.
left :: Monad m => x -> EitherT x m a
eitherT :: Monad m => (x -> m b) -> (a -> m b) -> EitherT x m a -> m b
-- | Constructor for computations in the either monad. (The inverse of
-- runEitherT).
newEitherT :: () => m (Either x a) -> EitherT x m a
-- | Extractor for computations in the either monad. (The inverse of
-- newEitherT).
runEitherT :: () => EitherT x m a -> m (Either x a)
pattern EitherT :: forall (m :: Type -> Type) x a. () => () => m (Either x a) -> ExceptT x m a
-- | Type alias for ExceptT
type EitherT = ExceptT
fromMaybeM :: Applicative f => f a -> Maybe a -> f a
whenM :: Monad m => m Bool -> m () -> m ()
unlessM :: Monad m => m Bool -> m () -> m ()
with :: Functor f => f a -> (a -> b) -> f b
module Traction.Control
newtype Db a
Db :: ReaderT TransactionContext (EitherT DbError IO) a -> Db a
[_runDb] :: Db a -> ReaderT TransactionContext (EitherT DbError IO) a
data DbError
DbSqlError :: Query -> SqlError -> DbError
DbQueryError :: Query -> QueryError -> DbError
DbFormatError :: Query -> FormatError -> DbError
DbResultError :: Query -> ResultError -> DbError
DbTooManyResults :: Query -> Int -> DbError
DbNoResults :: Query -> DbError
DbEncodingInvariant :: Query -> Text -> Text -> DbError
renderDbError :: DbError -> Text
newtype DbPool
DbPool :: (forall a. (Connection -> EitherT DbError IO a) -> EitherT DbError IO a) -> DbPool
[runDbPool] :: DbPool -> forall a. (Connection -> EitherT DbError IO a) -> EitherT DbError IO a
data DbPoolConfiguration
DbPoolConfiguration :: Int -> NominalDiffTime -> Int -> DbPoolConfiguration
[dbPoolStripes] :: DbPoolConfiguration -> Int
[dbPoolKeepAliveSeconds] :: DbPoolConfiguration -> NominalDiffTime
[dbPoolSize] :: DbPoolConfiguration -> Int
defaultDbPoolConfiguration :: DbPoolConfiguration
class MonadIO m => MonadDb m
liftDb :: MonadDb m => Db a -> m a
transaction :: Db a -> Db a
transactionT :: EitherT e Db a -> EitherT e Db a
runDb :: DbPool -> Db a -> EitherT DbError IO a
runDbT :: DbPool -> (DbError -> e) -> EitherT e Db a -> EitherT e IO a
runDbWith :: DbPool -> WithTransaction -> Db a -> EitherT DbError IO a
runDbWithT :: DbPool -> WithTransaction -> (DbError -> e) -> EitherT e Db a -> EitherT e IO a
newPool :: ByteString -> IO DbPool
newPoolWith :: ByteString -> DbPoolConfiguration -> Db () -> IO DbPool
newRollbackPool :: ByteString -> IO DbPool
newRollbackPoolWith :: ByteString -> DbPoolConfiguration -> Db () -> IO DbPool
withRollbackSingletonPool :: (MonadMask m, MonadIO m) => ByteString -> (DbPool -> m a) -> m a
withConnection :: Query -> (Connection -> IO a) -> Db a
failWith :: DbError -> Db a
instance GHC.Show.Show Traction.Control.RollbackException
instance GHC.Classes.Eq Traction.Control.RollbackException
instance GHC.Show.Show Traction.Control.DbPoolConfiguration
instance GHC.Classes.Ord Traction.Control.DbPoolConfiguration
instance GHC.Classes.Eq Traction.Control.DbPoolConfiguration
instance Control.Monad.Catch.MonadCatch Traction.Control.Db
instance Control.Monad.Catch.MonadThrow Traction.Control.Db
instance Control.Monad.Catch.MonadMask Traction.Control.Db
instance Control.Monad.IO.Class.MonadIO Traction.Control.Db
instance GHC.Base.Monad Traction.Control.Db
instance GHC.Base.Applicative Traction.Control.Db
instance GHC.Base.Functor Traction.Control.Db
instance GHC.Classes.Eq Traction.Control.DbError
instance GHC.Show.Show Traction.Control.DbError
instance GHC.Exception.Type.Exception Traction.Control.RollbackException
instance Traction.Control.MonadDb Traction.Control.Db
instance Traction.Control.MonadDb m => Traction.Control.MonadDb (Control.Monad.Trans.Except.ExceptT e m)
module Traction.Sql
-- | A single-value "collection".
--
-- This is useful if you need to supply a single parameter to a SQL
-- query, or extract a single column from a SQL result.
--
-- Parameter example:
--
--
-- query c "select x from scores where x > ?" (Only (42::Int))
--
--
-- Result example:
--
--
-- xs <- query_ c "select id from users"
-- forM_ xs $ \(Only id) -> {- ... -}
--
newtype Only a
Only :: a -> Only a
[fromOnly] :: Only a -> a
-- | Wrap binary data for use as a bytea value.
newtype Binary a
Binary :: a -> Binary a
[fromBinary] :: Binary a -> a
-- | Wrap a list for use as a PostgreSQL array.
newtype PGArray a
PGArray :: [a] -> PGArray a
[fromPGArray] :: PGArray a -> [a]
mandatory :: (MonadDb m, ToRow a, FromRow b) => Query -> a -> m b
mandatory_ :: (MonadDb m, FromRow a) => Query -> m a
unique :: (MonadDb m, ToRow a, FromRow b) => Query -> a -> m (Maybe b)
unique_ :: (MonadDb m, FromRow a) => Query -> m (Maybe a)
query :: (MonadDb m, ToRow a, FromRow b) => Query -> a -> m [b]
query_ :: (MonadDb m, FromRow a) => Query -> m [a]
execute :: (MonadDb m, ToRow a) => Query -> a -> m Int64
execute_ :: MonadDb m => Query -> m Int64
value :: Functor f => f (Only a) -> f a
valueWith :: Functor f => (a -> b) -> f (Only a) -> f b
values :: (Functor f, Functor g) => g (f (Only a)) -> g (f a)
valuesWith :: (Functor f, Functor g) => (a -> b) -> g (f (Only a)) -> g (f b)
newtype Schema
Schema :: Text -> Schema
[renderSchema] :: Schema -> Text
newSchema :: Text -> Maybe Schema
newtype Savepoint
Savepoint :: Text -> Savepoint
[renderSavepoint] :: Savepoint -> Text
newSavepoint :: Text -> Maybe Savepoint
createSavepoint :: Savepoint -> Db ()
releaseSavepoint :: Savepoint -> Db ()
rollbackSavepoint :: Savepoint -> Db ()
data Unique a
Unique :: a -> Unique a
Duplicate :: Query -> SqlError -> Unique a
isUnique :: Unique a -> Bool
isDuplicate :: Unique a -> Bool
withUniqueCheck :: MonadDb m => Db a -> m (Unique a)
withUniqueCheckSavepoint :: MonadDb m => Savepoint -> Db a -> m (Unique a)
instance GHC.Base.Functor Traction.Sql.Unique
instance GHC.Show.Show a => GHC.Show.Show (Traction.Sql.Unique a)
instance Data.Data.Data Traction.Sql.Savepoint
instance GHC.Show.Show Traction.Sql.Savepoint
instance GHC.Classes.Eq Traction.Sql.Savepoint
instance Data.Data.Data Traction.Sql.Schema
instance GHC.Show.Show Traction.Sql.Schema
instance GHC.Classes.Eq Traction.Sql.Schema
instance Database.PostgreSQL.Simple.ToField.ToField Traction.Sql.Savepoint
instance Database.PostgreSQL.Simple.ToField.ToField Traction.Sql.Schema
module Traction.QQ
savepoint :: QuasiQuoter
schema :: QuasiQuoter
-- | sql is a quasiquoter that eases the syntactic burden of writing
-- big sql statements in Haskell source code. For example:
--
--
-- {-# LANGUAGE QuasiQuotes #-}
--
-- query conn [sql| SELECT column_a, column_b
-- FROM table1 NATURAL JOIN table2
-- WHERE ? <= time AND time < ?
-- AND name LIKE ?
-- ORDER BY size DESC
-- LIMIT 100 |]
-- (beginTime,endTime,string)
--
--
-- This quasiquoter returns a literal string expression of type
-- Query, and attempts to mimimize whitespace; otherwise the above
-- query would consist of approximately half whitespace when sent to the
-- database backend. It also recognizes and strips out standard sql
-- comments "--".
--
-- The implementation of the whitespace reducer is currently incomplete.
-- Thus it can mess up your syntax in cases where whitespace should be
-- preserved as-is. It does preserve whitespace inside standard SQL
-- string literals. But it can get confused by the non-standard
-- PostgreSQL string literal syntax (which is the default setting in
-- PostgreSQL 8 and below), the extended escape string syntax, quoted
-- identifiers, and other similar constructs.
--
-- Of course, this caveat only applies to text written inside the SQL
-- quasiquoter; whitespace reduction is a compile-time computation and
-- thus will not touch the string parameter above, which is a
-- run-time value.
--
-- Also note that this will not work if the substring |] is
-- contained in the query.
sql :: QuasiQuoter
module Traction.Migration
data Migration
Migration :: Text -> Query -> Migration
[migrationName] :: Migration -> Text
[migrationQuery] :: Migration -> Query
migrate :: [Migration] -> Db [Migration]
instance GHC.Show.Show Traction.Migration.Migration
instance GHC.Classes.Eq Traction.Migration.Migration