úÎ :!      Bindings to wiringPi library© Patrick Pelletier, 2017BSD3code@funwithsoftware.org experimental Raspberry Pi Safe-Inferred Argument to - to set "balanced" mode or "mark-space" mode.mark-space mode balanced mode Use with 3 to enable internal pull-up or pull-down resistor.enable pull-up resistorenable pull-down resistordisable pull-up/pull-downPin mode, used with ..clock output; only supported on wiringPi pin 7 8pulse-width modulation; only supported on wiringPi pin 1 digital output  digital input Digital logic level.Value used with W. Typically ranges from 0-1024, but the range can be increased up to 4096 by calling . Represents a  http://wiringpi.com/pins/ pin numberL. The meaning of the pin number depends on which setup function was called.Use  http://wiringpi.com/pins/wiringPi's pin numbers.AUse Broadcom chip's GPIO numbers. These are the numbers on the  &https://www.adafruit.com/products/1754Adafruit cobbler.-Use physical pin numbers on the P1 connector.:Use Broadcom chip's GPIO numbers. Accesses the GPIO via /sys/class/GPIO;. A bunch of functionality is not available in this mode.4Default range is 0-1024, but it can be changed with .>Write 8 bits to the 8 pins that have wiringPi pin numbers 0-7.Change the range used by . Default is 1024.  ]https://raspberrypi.stackexchange.com/questions/4906/control-hardware-pwm-frequency/9725#9725Maxium is 4096.#Change the PWM divisor. Range is  ]https://raspberrypi.stackexchange.com/questions/4906/control-hardware-pwm-frequency/9725#97252-4095.7 !"#$%&'()*+,-./0123456 !  !    ,   !"#$%&'()*+,-./0123456 7      !"#$%&'()*+,-./0123456789wiringPi-0.1.0.0System.Hardware.WiringPiPwmMode PWM_MODE_MS PWM_MODE_BALPudPUD_UPPUD_DOWNPUD_OFFMode GPIO_CLOCK PWM_OUTPUTOUTPUTINPUTValueHIGHLOWPwmValuePin wiringPiSetupwiringPiSetupGpiowiringPiSetupPhyswiringPiSetupSyspinModepullUpDnControl digitalRead digitalWritepwmWritedigitalWriteByte pwmSetMode pwmSetRange pwmSetClock piBoardRev wpiPinToGpio physPinToGpioc_physPinToGpioc_wpiPinToGpio c_piBoardRev c_pwmSetClock c_pwmSetRange c_pwmSetModec_digitalWriteByte c_pwmWritec_digitalWrite c_digitalReadc_pullUpDnControl c_pinModec_wiringPiSetupSysc_wiringPiSetupPhysc_wiringPiSetupGpioc_wiringPiSetup valueToInt intToValue modeToIntpudToInt pwmModeToIntdoWiringPiSetup