{-# LANGUAGE CPP #-} -- We need to link to the current version of xmonad-docs, but both -- CURRENT_PACKAGE_VERSION and VERSION_xmonad_contrib contain quotation marks -- that we can't get rid of using CPP, so as a workaround we define the -- components separately in cpp-options and check that they're still in sync. #if !__HLINT__ && \ !( MIN_VERSION_xmonad_contrib(XMONAD_CONTRIB_VERSION_MAJOR, XMONAD_CONTRIB_VERSION_MINOR, XMONAD_CONTRIB_VERSION_PATCH) \ && !MIN_VERSION_xmonad_contrib(XMONAD_CONTRIB_VERSION_MAJOR, XMONAD_CONTRIB_VERSION_MINOR, XMONAD_CONTRIB_VERSION_PATCH + 1) \ ) #error "Please update XMONAD_CONTRIB_VERSION_* in xmonad-contrib.cabal" #endif ----------------------------------------------------------------------------- -- | -- Module : XMonad.Doc.Extending -- Description : A module to document the xmonad-contrib library. -- Copyright : (C) 2007 Andrea Rossato -- License : BSD3 -- -- Maintainer : andrea.rossato@unibz.it -- Stability : unstable -- Portability : portable -- -- This module documents the xmonad-contrib library and -- how to use it to extend the capabilities of xmonad. -- -- Reading this document should not require a deep knowledge of -- Haskell; the examples are intended to be useful and understandable -- for those users who do not know Haskell and don't want to have to -- learn it just to configure xmonad. You should be able to get by -- just fine by ignoring anything you don't understand and using the -- provided examples as templates. However, relevant Haskell features -- are discussed when appropriate, so this document will hopefully be -- useful for more advanced Haskell users as well. -- -- Those wishing to be totally hardcore and develop their own xmonad -- extensions (it's easier than it sounds, we promise!) should read -- the documentation in "XMonad.Doc.Developing". -- -- More configuration examples may be found on the Haskell wiki: -- -- -- ----------------------------------------------------------------------------- module XMonad.Doc.Extending ( -- * The xmonad-contrib library -- $library -- ** Actions -- $actions -- ** Hooks -- $hooks -- ** Layouts -- $layouts -- ** Prompts -- $prompts -- ** Utilities -- $utils -- * Extending xmonad -- $extending -- ** Editing key bindings -- $keys -- *** Adding key bindings -- $keyAdding -- *** Removing key bindings -- $keyDel -- *** Adding and removing key bindings -- $keyAddDel -- ** Editing mouse bindings -- $mouse -- ** Editing the layout hook -- $layoutHook -- ** Editing the manage hook -- $manageHook -- ** The log hook and external status bars -- $logHook ) where -------------------------------------------------------------------------------- -- -- The XmonadContrib Library -- -------------------------------------------------------------------------------- {- $library The xmonad-contrib (xmc) library is a set of extension modules contributed by xmonad hackers and users, which provide additional xmonad features. Examples include various layout modes (tabbed, spiral, three-column...), prompts, program launchers, the ability to manipulate windows and workspaces in various ways, alternate navigation modes, and much more. There are also \"meta-modules\" which make it easier to write new modules and extensions. This is a description of the different namespaces in xmonad-contrib. For more information about any particular module, go to the root of the documentation and just click on its name to view its Haddock documentation; each module should come with extensive documentation. If you find a module that could be better documented, or has incorrect documentation, please report it as a bug ()! First and foremost, xmonad defines its own prelude for commonly used functions, as well as re-exports from @base@. * "XMonad.Prelude": Utility functions and re-exports for a more ergonomic developing experience. There are also other documentation modules, showing you around individual parts of xmonad: * "XMonad.Doc.Configuring": Brief tutorial that will teach you how to create a basic xmonad configuration. * "XMonad.Doc.Developing": A brief overview of xmonad's internals. A list of the contrib modules can be found at -} {- $actions In the @XMonad.Actions@ namespace you can find modules exporting various functions that are usually intended to be bound to key combinations or mouse actions, in order to provide functionality beyond the standard keybindings provided by xmonad. See "XMonad.Doc.Extending#Editing_key_bindings" for instructions on how to edit your key bindings. -} {- $hooks In the @XMonad.Hooks@ namespace you can find modules exporting hooks. Hooks are actions that xmonad performs when certain events occur. The three most important hooks are: * 'XMonad.Core.manageHook': this hook is called when a new window xmonad must take care of is created. This is a very powerful hook, since it lets us examine the new window's properties and act accordingly. For instance, we can configure xmonad to put windows belonging to a given application in the float layer, not to manage dock applications, or open them in a given workspace. See "XMonad.Doc.Extending#Editing_the_manage_hook" for more information on customizing 'XMonad.Core.manageHook'. * 'XMonad.Core.logHook': this hook is called when the stack of windows managed by xmonad has been changed, by calling the 'XMonad.Operations.windows' function. For instance "XMonad.Hooks.DynamicLog" will produce a string (whose format can be configured) to be printed to the standard output. This can be used to display some information about the xmonad state in a status bar. See "XMonad.Doc.Extending#The_log_hook_and_external_status_bars" for more information. * 'XMonad.Core.handleEventHook': this hook is called on all events handled by xmonad, thus it is extremely powerful. See "Graphics.X11.Xlib.Extras" and xmonad source and development documentation for more details. -} {- $layouts In the @XMonad.Layout@ namespace you can find modules exporting contributed tiling algorithms, such as a tabbed layout, a circle, a spiral, three columns, and so on. You will also find modules which provide facilities for combining different layouts, such as "XMonad.Layout.Combo", "XMonad.Layout.ComboP", "XMonad.Layout.LayoutBuilder", "XMonad.Layout.SubLayouts", or "XMonad.Layout.LayoutCombinators". Layouts can be also modified with layout modifiers. A general interface for writing layout modifiers is implemented in "XMonad.Layout.LayoutModifier". For more information on using those modules for customizing your 'XMonad.Core.layoutHook' see "XMonad.Doc.Extending#Editing_the_layout_hook". -} {- $prompts In the @XMonad.Prompt@ name space you can find modules providing graphical prompts for getting user input and using it to perform various actions. The "XMonad.Prompt" provides a library for easily writing new prompt modules. -} {- $utils In the @XMonad.Util@ namespace you can find modules exporting various utility functions that are used by the other modules of the xmonad-contrib library. There are also utilities for helping in configuring xmonad or using external utilities. -} -------------------------------------------------------------------------------- -- -- Extending Xmonad -- -------------------------------------------------------------------------------- {- $extending #Extending_xmonad# Since the @xmonad.hs@ file is just another Haskell module, you may import and use any Haskell code or libraries you wish, such as extensions from the xmonad-contrib library, or other code you write yourself. -} {- $keys #Editing_key_bindings# Editing key bindings means changing the 'XMonad.Core.XConfig.keys' field of the 'XMonad.Core.XConfig' record used by xmonad. For example, you could write: > import XMonad > > main = xmonad $ def { keys = myKeys } and provide an appropriate definition of @myKeys@, such as: > myKeys conf@(XConfig {XMonad.modMask = modm}) = M.fromList > [ ((modm, xK_F12), xmonadPrompt def) > , ((modm, xK_F3 ), shellPrompt def) > ] This particular definition also requires importing "XMonad.Prompt", "XMonad.Prompt.Shell", "XMonad.Prompt.XMonad", and "Data.Map": > import qualified Data.Map as M > import XMonad.Prompt > import XMonad.Prompt.Shell > import XMonad.Prompt.XMonad For a list of the names of particular keys (such as xK_F12, and so on), see Usually, rather than completely redefining the key bindings, as we did above, we want to simply add some new bindings and\/or remove existing ones. -} {- $keyAdding #Adding_key_bindings# Adding key bindings can be done in different ways. See the end of this section for the easiest ways. The type signature of 'XMonad.Core.XConfig.keys' is: > keys :: XConfig Layout -> M.Map (ButtonMask,KeySym) (X ()) In order to add new key bindings, you need to first create an appropriate 'Data.Map.Map' from a list of key bindings using 'Data.Map.fromList'. This 'Data.Map.Map' of new key bindings then needs to be joined to a 'Data.Map.Map' of existing bindings using 'Data.Map.union'. Since we are going to need some of the functions of the "Data.Map" module, before starting we must first import this modules: > import qualified Data.Map as M For instance, if you have defined some additional key bindings like these: > myKeys conf@(XConfig {XMonad.modMask = modm}) = M.fromList > [ ((modm, xK_F12), xmonadPrompt def) > , ((modm, xK_F3 ), shellPrompt def) > ] then you can create a new key bindings map by joining the default one with yours: > newKeys x = myKeys x `M.union` keys def x Finally, you can use @newKeys@ in the 'XMonad.Core.XConfig.keys' field of the configuration: > main = xmonad $ def { keys = newKeys } Alternatively, the '<+>' operator can be used which in this usage does exactly the same as the explicit usage of 'M.union' and propagation of the config argument, thanks to appropriate instances in "Data.Monoid". > main = xmonad $ def { keys = myKeys <+> keys def } All together, your @~\/.xmonad\/xmonad.hs@ would now look like this: > module Main (main) where > > import XMonad > > import qualified Data.Map as M > import Graphics.X11.Xlib > import XMonad.Prompt > import XMonad.Prompt.Shell > import XMonad.Prompt.XMonad > > main :: IO () > main = xmonad $ def { keys = myKeys <+> keys def } > > myKeys conf@(XConfig {XMonad.modMask = modm}) = M.fromList > [ ((modm, xK_F12), xmonadPrompt def) > , ((modm, xK_F3 ), shellPrompt def) > ] There are much simpler ways to accomplish this, however, if you are willing to use an extension module to help you configure your keys. For instance, "XMonad.Util.EZConfig" and "XMonad.Util.CustomKeys" both provide useful functions for editing your key bindings; "XMonad.Util.EZConfig" even lets you use emacs-style keybinding descriptions like \"M-C-\". -} {- $keyDel #Removing_key_bindings# Removing key bindings requires modifying the 'Data.Map.Map' which stores the key bindings. This can be done with 'Data.Map.difference' or with 'Data.Map.delete'. For example, suppose you want to get rid of @mod-q@ and @mod-shift-q@ (you just want to leave xmonad running forever). To do this you need to define @newKeys@ as a 'Data.Map.difference' between the default map and the map of the key bindings you want to remove. Like so: > newKeys x = keys def x `M.difference` keysToRemove x > > keysToRemove :: XConfig Layout -> M.Map (KeyMask, KeySym) (X ()) > keysToRemove x = M.fromList > [ ((modm , xK_q ), return ()) > , ((modm .|. shiftMask, xK_q ), return ()) > ] As you can see, it doesn't matter what actions we associate with the keys listed in @keysToRemove@, so we just use @return ()@ (the \"null\" action). It is also possible to simply define a list of keys we want to unbind and then use 'Data.Map.delete' to remove them. In that case we would write something like: > newKeys x = foldr M.delete (keys def x) (keysToRemove x) > > keysToRemove :: XConfig Layout -> [(KeyMask, KeySym)] > keysToRemove x = > [ (modm , xK_q ) > , (modm .|. shiftMask, xK_q ) > ] Another even simpler possibility is the use of some of the utilities provided by the xmonad-contrib library. Look, for instance, at 'XMonad.Util.EZConfig.removeKeys'. -} {- $keyAddDel #Adding_and_removing_key_bindings# Adding and removing key bindings requires simply combining the steps for removing and adding. Here is an example from "XMonad.Config.Arossato": > defKeys = keys def > delKeys x = foldr M.delete (defKeys x) (toRemove x) > newKeys x = foldr (uncurry M.insert) (delKeys x) (toAdd x) > -- remove some of the default key bindings > toRemove XConfig{modMask = modm} = > [ (modm , xK_j ) > , (modm , xK_k ) > , (modm , xK_p ) > , (modm .|. shiftMask, xK_p ) > , (modm .|. shiftMask, xK_q ) > , (modm , xK_q ) > ] ++ > -- I want modm .|. shiftMask 1-9 to be free! > [(shiftMask .|. modm, k) | k <- [xK_1 .. xK_9]] > -- These are my personal key bindings > toAdd XConfig{modMask = modm} = > [ ((modm , xK_F12 ), xmonadPrompt def ) > , ((modm , xK_F3 ), shellPrompt def ) > ] ++ > -- Use modm .|. shiftMask .|. controlMask 1-9 instead > [( (m .|. modm, k), windows $ f i) > | (i, k) <- zip (workspaces x) [xK_1 .. xK_9] > , (f, m) <- [(W.greedyView, 0), (W.shift, shiftMask .|. controlMask)] > ] You can achieve the same result using the "XMonad.Util.CustomKeys" module; take a look at the 'XMonad.Util.CustomKeys.customKeys' function in particular. NOTE: modm is defined as the modMask you defined (or left as the default) in your config. -} {- $mouse #Editing_mouse_bindings# Most of the previous discussion of key bindings applies to mouse bindings as well. For example, you could configure button4 to close the window you click on like so: > import qualified Data.Map as M > > myMouse x = [ (0, button4), (\w -> focus w >> kill) ] > > newMouse x = M.union (mouseBindings def x) (M.fromList (myMouse x)) > > main = xmonad $ def { ..., mouseBindings = newMouse, ... } Overriding or deleting mouse bindings works similarly. You can also configure mouse bindings much more easily using the 'XMonad.Util.EZConfig.additionalMouseBindings' and 'XMonad.Util.EZConfig.removeMouseBindings' functions from the "XMonad.Util.EZConfig" module. -} {- $layoutHook #Editing_the_layout_hook# When you start an application that opens a new window, when you change the focused window, or move it to another workspace, or change that workspace's layout, xmonad will use the 'XMonad.Core.layoutHook' for reordering the visible windows on the visible workspace(s). Since different layouts may be attached to different workspaces, and you can change them, xmonad needs to know which one to use. In this sense the layoutHook may be thought as the list of layouts that xmonad will use for laying out windows on the screen(s). The problem is that the layout subsystem is implemented with an advanced feature of the Haskell programming language: type classes. This allows us to very easily write new layouts, combine or modify existing layouts, create layouts with internal state, etc. See "XMonad.Doc.Extending#The_LayoutClass" for more information. This means that we cannot simply have a list of layouts as we used to have before the 0.5 release: a list requires every member to belong to the same type! Instead the combination of layouts to be used by xmonad is created with a specific layout combinator: 'XMonad.Layout.|||'. Suppose we want a list with the 'XMonad.Layout.Full', 'XMonad.Layout.Tabbed.tabbed' and 'XMonad.Layout.Accordion.Accordion' layouts. First we import, in our @~\/.xmonad\/xmonad.hs@, all the needed modules: > import XMonad > > import XMonad.Layout.Tabbed > import XMonad.Layout.Accordion Then we create the combination of layouts we need: > mylayoutHook = Full ||| tabbed shrinkText def ||| Accordion Now, all we need to do is change the 'XMonad.Core.layoutHook' field of the 'XMonad.Core.XConfig' record, like so: > main = xmonad $ def { layoutHook = mylayoutHook } Thanks to the new combinator, we can apply a layout modifier to a whole combination of layouts, instead of applying it to each one. For example, suppose we want to use the 'XMonad.Layout.NoBorders.noBorders' layout modifier, from the "XMonad.Layout.NoBorders" module (which must be imported): > mylayoutHook = noBorders (Full ||| tabbed shrinkText def ||| Accordion) If we want only the tabbed layout without borders, then we may write: > mylayoutHook = Full ||| noBorders (tabbed shrinkText def) ||| Accordion Our @~\/.xmonad\/xmonad.hs@ will now look like this: > import XMonad > > import XMonad.Layout.Tabbed > import XMonad.Layout.Accordion > import XMonad.Layout.NoBorders > > mylayoutHook = Full ||| noBorders (tabbed shrinkText def) ||| Accordion > > main = xmonad $ def { layoutHook = mylayoutHook } That's it! -} {- $manageHook #Editing_the_manage_hook# The 'XMonad.Core.manageHook' is a very powerful tool for customizing the behavior of xmonad with regard to new windows. Whenever a new window is created, xmonad calls the 'XMonad.Core.manageHook', which can thus be used to perform certain actions on the new window, such as placing it in a specific workspace, ignoring it, or placing it in the float layer. The default 'XMonad.Core.manageHook' causes xmonad to float MPlayer and Gimp, and to ignore gnome-panel, desktop_window, kicker, and kdesktop. The "XMonad.ManageHook" module provides some simple combinators that can be used to alter the 'XMonad.Core.manageHook' by replacing or adding to the default actions. Let's start by analyzing the default 'XMonad.Config.manageHook', defined in "XMonad.Config": > manageHook :: ManageHook > manageHook = composeAll > [ className =? "MPlayer" --> doFloat > , className =? "Gimp" --> doFloat > , resource =? "desktop_window" --> doIgnore > , resource =? "kdesktop" --> doIgnore ] 'XMonad.ManageHook.composeAll' can be used to compose a list of different 'XMonad.Config.ManageHook's. In this example we have a list of 'XMonad.Config.ManageHook's formed by the following commands: the Mplayer's and the Gimp's windows, whose 'XMonad.ManageHook.className' are, respectively \"Mplayer\" and \"Gimp\", are to be placed in the float layer with the 'XMonad.ManageHook.doFloat' function; the windows whose resource names are respectively \"desktop_window\" and \kdesktop\" are to be ignored with the 'XMonad.ManageHook.doIgnore' function. This is another example of 'XMonad.Config.manageHook', taken from "XMonad.Config.Arossato": > myManageHook = composeAll [ resource =? "realplay.bin" --> doFloat > , resource =? "win" --> doF (W.shift "doc") -- xpdf > , resource =? "firefox-bin" --> doF (W.shift "web") > ] > newManageHook = myManageHook <+> manageHook def Again we use 'XMonad.ManageHook.composeAll' to compose a list of different 'XMonad.Config.ManageHook's. The first one will put RealPlayer on the float layer, the second one will put the xpdf windows in the workspace named \"doc\", with 'XMonad.ManageHook.doF' and 'XMonad.StackSet.shift' functions, and the third one will put all firefox windows on the workspace called "web". Then we use the 'XMonad.ManageHook.<+>' combinator to compose @myManageHook@ with the default 'XMonad.Config.manageHook' to form @newManageHook@. Each 'XMonad.Config.ManageHook' has the form: > property =? match --> action Where @property@ can be: * 'XMonad.ManageHook.title': the window's title * 'XMonad.ManageHook.resource': the resource name * 'XMonad.ManageHook.className': the resource class name. * 'XMonad.ManageHook.stringProperty' @somestring@: the contents of the property @somestring@. (You can retrieve the needed information using the X utility named @xprop@; for example, to find the resource class name, you can type > xprop | grep WM_CLASS at a prompt, then click on the window whose resource class you want to know.) @match@ is the string that will match the property value (for instance the one you retrieved with @xprop@). An @action@ can be: * 'XMonad.ManageHook.doFloat': to place the window in the float layer; * 'XMonad.ManageHook.doIgnore': to ignore the window; * 'XMonad.ManageHook.doF': to execute a function with the window as argument. For example, suppose we want to add a 'XMonad.Config.manageHook' to float RealPlayer, which usually has a 'XMonad.ManageHook.resource' name of \"realplay.bin\". First we need to import "XMonad.ManageHook": > import XMonad.ManageHook Then we create our own 'XMonad.Config.manageHook': > myManageHook = resource =? "realplay.bin" --> doFloat We can now use the 'XMonad.ManageHook.<+>' combinator to add our 'XMonad.Config.manageHook' to the default one: > newManageHook = myManageHook <+> manageHook def (Of course, if we wanted to completely replace the default 'XMonad.Config.manageHook', this step would not be necessary.) Now, all we need to do is change the 'XMonad.Core.manageHook' field of the 'XMonad.Core.XConfig' record, like so: > main = xmonad def { ..., manageHook = newManageHook, ... } And we are done. Obviously, we may wish to add more then one 'XMonad.Config.manageHook'. In this case we can use a list of hooks, compose them all with 'XMonad.ManageHook.composeAll', and add the composed to the default one. For instance, if we want RealPlayer to float and thunderbird always opened in the workspace named "mail", we can do so like this: > myManageHook = composeAll [ resource =? "realplay.bin" --> doFloat > , resource =? "thunderbird-bin" --> doF (W.shift "mail") > ] Remember to import the module that defines the 'XMonad.StackSet.shift' function, "XMonad.StackSet", like this: > import qualified XMonad.StackSet as W And then we can add @myManageHook@ to the default one to create @newManageHook@ as we did in the previous example. One more thing to note about this system is that if a window matches multiple rules in a 'XMonad.Config.manageHook', /all/ of the corresponding actions will be run (in the order in which they are defined). This is a change from versions before 0.5, when only the first rule that matched was run. Finally, for additional rules and actions you can use in your manageHook, check out the contrib module "XMonad.Hooks.ManageHelpers". -} {- $logHook #The_log_hook_and_external_status_bars# When the stack of the windows managed by xmonad changes for any reason, xmonad will call 'XMonad.Core.logHook', which can be used to output some information about the internal state of xmonad, such as the layout that is presently in use, the workspace we are in, the focused window's title, and so on. Extracting information about the internal xmonad state can be somewhat difficult if you are not familiar with the source code. Therefore, it's usually easiest to use a module that has been designed specifically for logging some of the most interesting information about the internal state of xmonad: "XMonad.Hooks.DynamicLog". This module can be used with an external status bar to print the produced logs in a convenient way; the most commonly used status bars are dzen and xmobar. The module "XMonad.Hooks.StatusBar" offers another interface to interact with status bars, that might be more convenient to use. By default the 'XMonad.Core.logHook' doesn't produce anything. To enable it you need first to import "XMonad.Hooks.DynamicLog": > import XMonad.Hooks.DynamicLog Then you just need to update the 'XMonad.Core.logHook' field of the 'XMonad.Core.XConfig' record with one of the provided functions. For example: > main = xmonad def { logHook = dynamicLog } More interesting configurations are also possible; see the "XMonad.Hooks.DynamicLog" module for more possibilities. You may now enjoy your extended xmonad experience. Have fun! -}