Amazonka.MediaConvert.Types.M3u8Settings

Documentation

data M3u8Settings

These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.

See: newM3u8Settings smart constructor.

Constructors

M3u8Settings'

Fields

• audioDuration :: Maybe M3u8AudioDuration

  Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

• audioFramesPerPes :: Maybe Natural

  The number of audio frames to insert for each PES packet.

• audioPids :: Maybe [Natural]

  Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.

• dataPTSControl :: Maybe M3u8DataPtsControl

  If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value (AUTO) to allow all PTS values.

• maxPcrInterval :: Maybe Natural

  Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.

• nielsenId3 :: Maybe M3u8NielsenId3

  If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

• patInterval :: Maybe Natural

  The number of milliseconds between instances of this table in the output transport stream.

• pcrControl :: Maybe M3u8PcrControl

  When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

• pcrPid :: Maybe Natural

  Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.

• pmtInterval :: Maybe Natural

  The number of milliseconds between instances of this table in the output transport stream.

• pmtPid :: Maybe Natural

  Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.

• privateMetadataPid :: Maybe Natural

  Packet Identifier (PID) of the private metadata stream in the transport stream.

• programNumber :: Maybe Natural

  The value of the program number field in the Program Map Table.

• scte35Pid :: Maybe Natural

  Packet Identifier (PID) of the SCTE-35 stream in the transport stream.

• scte35Source :: Maybe M3u8Scte35Source

  For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).

• timedMetadata :: Maybe TimedMetadata

  Set ID3 metadata (timedMetadata) to Passthrough (PASSTHROUGH) to include ID3 metadata in this output. This includes ID3 metadata from the following features: ID3 timestamp period (timedMetadataId3Period), and Custom ID3 metadata inserter (timedMetadataInsertion). To exclude this ID3 metadata in this output: set ID3 metadata to None (NONE) or leave blank.

• timedMetadataPid :: Maybe Natural

  Packet Identifier (PID) of the ID3 metadata stream in the transport stream.

• transportStreamId :: Maybe Natural

  The value of the transport stream ID field in the Program Map Table.

• videoPid :: Maybe Natural

  Packet Identifier (PID) of the elementary video stream in the transport stream.

Instances

FromJSON M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Methods

parseJSON :: Value -> Parser M3u8Settings

parseJSONList :: Value -> Parser [M3u8Settings]

ToJSON M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Methods

toJSON :: M3u8Settings -> Value

toEncoding :: M3u8Settings -> Encoding

toJSONList :: [M3u8Settings] -> Value

toEncodingList :: [M3u8Settings] -> Encoding

Generic M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Associated Types

type Rep M3u8Settings :: Type -> Type

Methods

from :: M3u8Settings -> Rep M3u8Settings x

to :: Rep M3u8Settings x -> M3u8Settings

Read M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Methods

readsPrec :: Int -> ReadS M3u8Settings

readList :: ReadS [M3u8Settings]

readPrec :: ReadPrec M3u8Settings

readListPrec :: ReadPrec [M3u8Settings]

Show M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Methods

showsPrec :: Int -> M3u8Settings -> ShowS

show :: M3u8Settings -> String

showList :: [M3u8Settings] -> ShowS

NFData M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Methods

rnf :: M3u8Settings -> ()

Eq M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Methods

(==) :: M3u8Settings -> M3u8Settings -> Bool

(/=) :: M3u8Settings -> M3u8Settings -> Bool

Hashable M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

Methods

hashWithSalt :: Int -> M3u8Settings -> Int

hash :: M3u8Settings -> Int

type Rep M3u8Settings

Defined in Amazonka.MediaConvert.Types.M3u8Settings

type Rep M3u8Settings = D1 ('MetaData "M3u8Settings" "Amazonka.MediaConvert.Types.M3u8Settings" "amazonka-mediaconvert-2.0-ClG8xHhlx4y6bdaCrZchqH" 'False) (C1 ('MetaCons "M3u8Settings'" 'PrefixI 'True) ((((S1 ('MetaSel ('Just "audioDuration") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M3u8AudioDuration)) :*: S1 ('MetaSel ('Just "audioFramesPerPes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural))) :*: (S1 ('MetaSel ('Just "audioPids") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Natural])) :*: S1 ('MetaSel ('Just "dataPTSControl") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M3u8DataPtsControl)))) :*: ((S1 ('MetaSel ('Just "maxPcrInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "nielsenId3") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M3u8NielsenId3))) :*: (S1 ('MetaSel ('Just "patInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "pcrControl") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M3u8PcrControl)) :*: S1 ('MetaSel ('Just "pcrPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)))))) :*: (((S1 ('MetaSel ('Just "pmtInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "pmtPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural))) :*: (S1 ('MetaSel ('Just "privateMetadataPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "programNumber") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "scte35Pid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural))))) :*: ((S1 ('MetaSel ('Just "scte35Source") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M3u8Scte35Source)) :*: S1 ('MetaSel ('Just "timedMetadata") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe TimedMetadata))) :*: (S1 ('MetaSel ('Just "timedMetadataPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "transportStreamId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "videoPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural))))))))

newM3u8Settings :: M3u8Settings

Create a value of M3u8Settings with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:audioDuration:M3u8Settings', m3u8Settings_audioDuration - Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

$sel:audioFramesPerPes:M3u8Settings', m3u8Settings_audioFramesPerPes - The number of audio frames to insert for each PES packet.

$sel:audioPids:M3u8Settings', m3u8Settings_audioPids - Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.

$sel:dataPTSControl:M3u8Settings', m3u8Settings_dataPTSControl - If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value (AUTO) to allow all PTS values.

$sel:maxPcrInterval:M3u8Settings', m3u8Settings_maxPcrInterval - Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.

$sel:nielsenId3:M3u8Settings', m3u8Settings_nielsenId3 - If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

$sel:patInterval:M3u8Settings', m3u8Settings_patInterval - The number of milliseconds between instances of this table in the output transport stream.

$sel:pcrControl:M3u8Settings', m3u8Settings_pcrControl - When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

$sel:pcrPid:M3u8Settings', m3u8Settings_pcrPid - Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.

$sel:pmtInterval:M3u8Settings', m3u8Settings_pmtInterval - The number of milliseconds between instances of this table in the output transport stream.

$sel:pmtPid:M3u8Settings', m3u8Settings_pmtPid - Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.

$sel:privateMetadataPid:M3u8Settings', m3u8Settings_privateMetadataPid - Packet Identifier (PID) of the private metadata stream in the transport stream.

$sel:programNumber:M3u8Settings', m3u8Settings_programNumber - The value of the program number field in the Program Map Table.

$sel:scte35Pid:M3u8Settings', m3u8Settings_scte35Pid - Packet Identifier (PID) of the SCTE-35 stream in the transport stream.

$sel:scte35Source:M3u8Settings', m3u8Settings_scte35Source - For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).

$sel:timedMetadata:M3u8Settings', m3u8Settings_timedMetadata - Set ID3 metadata (timedMetadata) to Passthrough (PASSTHROUGH) to include ID3 metadata in this output. This includes ID3 metadata from the following features: ID3 timestamp period (timedMetadataId3Period), and Custom ID3 metadata inserter (timedMetadataInsertion). To exclude this ID3 metadata in this output: set ID3 metadata to None (NONE) or leave blank.

$sel:timedMetadataPid:M3u8Settings', m3u8Settings_timedMetadataPid - Packet Identifier (PID) of the ID3 metadata stream in the transport stream.

$sel:transportStreamId:M3u8Settings', m3u8Settings_transportStreamId - The value of the transport stream ID field in the Program Map Table.

$sel:videoPid:M3u8Settings', m3u8Settings_videoPid - Packet Identifier (PID) of the elementary video stream in the transport stream.

m3u8Settings_audioDuration :: Lens' M3u8Settings (Maybe M3u8AudioDuration)

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration (MATCH_VIDEO_DURATION). In all other cases, keep the default value, Default codec duration (DEFAULT_CODEC_DURATION). When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

m3u8Settings_audioFramesPerPes :: Lens' M3u8Settings (Maybe Natural)

The number of audio frames to insert for each PES packet.

m3u8Settings_audioPids :: Lens' M3u8Settings (Maybe [Natural])

Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.

m3u8Settings_dataPTSControl :: Lens' M3u8Settings (Maybe M3u8DataPtsControl)

If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value (AUTO) to allow all PTS values.

m3u8Settings_maxPcrInterval :: Lens' M3u8Settings (Maybe Natural)

Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.

m3u8Settings_nielsenId3 :: Lens' M3u8Settings (Maybe M3u8NielsenId3)

If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

m3u8Settings_patInterval :: Lens' M3u8Settings (Maybe Natural)

The number of milliseconds between instances of this table in the output transport stream.

m3u8Settings_pcrControl :: Lens' M3u8Settings (Maybe M3u8PcrControl)

When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

m3u8Settings_pcrPid :: Lens' M3u8Settings (Maybe Natural)

Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.

m3u8Settings_pmtInterval :: Lens' M3u8Settings (Maybe Natural)

The number of milliseconds between instances of this table in the output transport stream.

m3u8Settings_pmtPid :: Lens' M3u8Settings (Maybe Natural)

Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.

m3u8Settings_privateMetadataPid :: Lens' M3u8Settings (Maybe Natural)

Packet Identifier (PID) of the private metadata stream in the transport stream.

m3u8Settings_programNumber :: Lens' M3u8Settings (Maybe Natural)

The value of the program number field in the Program Map Table.

m3u8Settings_scte35Pid :: Lens' M3u8Settings (Maybe Natural)

Packet Identifier (PID) of the SCTE-35 stream in the transport stream.

m3u8Settings_scte35Source :: Lens' M3u8Settings (Maybe M3u8Scte35Source)

For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None (NONE) if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None (NONE) if you don't want manifest conditioning. Choose Passthrough (PASSTHROUGH) and choose Ad markers (adMarkers) if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML (sccXml).

m3u8Settings_timedMetadata :: Lens' M3u8Settings (Maybe TimedMetadata)

Set ID3 metadata (timedMetadata) to Passthrough (PASSTHROUGH) to include ID3 metadata in this output. This includes ID3 metadata from the following features: ID3 timestamp period (timedMetadataId3Period), and Custom ID3 metadata inserter (timedMetadataInsertion). To exclude this ID3 metadata in this output: set ID3 metadata to None (NONE) or leave blank.

m3u8Settings_timedMetadataPid :: Lens' M3u8Settings (Maybe Natural)

Packet Identifier (PID) of the ID3 metadata stream in the transport stream.

m3u8Settings_transportStreamId :: Lens' M3u8Settings (Maybe Natural)

The value of the transport stream ID field in the Program Map Table.

m3u8Settings_videoPid :: Lens' M3u8Settings (Maybe Natural)

Packet Identifier (PID) of the elementary video stream in the transport stream.