Copyright | (c) 2013-2023 Brendan Hay |
---|---|
License | Mozilla Public License, v. 2.0. |
Maintainer | Brendan Hay |
Stability | auto-generated |
Portability | non-portable (GHC extensions) |
Safe Haskell | Safe-Inferred |
Language | Haskell2010 |
Synopsis
- data Eac3Settings = Eac3Settings' {
- attenuationControl :: Maybe Eac3AttenuationControl
- bitrate :: Maybe Natural
- bitstreamMode :: Maybe Eac3BitstreamMode
- codingMode :: Maybe Eac3CodingMode
- dcFilter :: Maybe Eac3DcFilter
- dialnorm :: Maybe Natural
- dynamicRangeCompressionLine :: Maybe Eac3DynamicRangeCompressionLine
- dynamicRangeCompressionRf :: Maybe Eac3DynamicRangeCompressionRf
- lfeControl :: Maybe Eac3LfeControl
- lfeFilter :: Maybe Eac3LfeFilter
- loRoCenterMixLevel :: Maybe Double
- loRoSurroundMixLevel :: Maybe Double
- ltRtCenterMixLevel :: Maybe Double
- ltRtSurroundMixLevel :: Maybe Double
- metadataControl :: Maybe Eac3MetadataControl
- passthroughControl :: Maybe Eac3PassthroughControl
- phaseControl :: Maybe Eac3PhaseControl
- sampleRate :: Maybe Natural
- stereoDownmix :: Maybe Eac3StereoDownmix
- surroundExMode :: Maybe Eac3SurroundExMode
- surroundMode :: Maybe Eac3SurroundMode
- newEac3Settings :: Eac3Settings
- eac3Settings_attenuationControl :: Lens' Eac3Settings (Maybe Eac3AttenuationControl)
- eac3Settings_bitrate :: Lens' Eac3Settings (Maybe Natural)
- eac3Settings_bitstreamMode :: Lens' Eac3Settings (Maybe Eac3BitstreamMode)
- eac3Settings_codingMode :: Lens' Eac3Settings (Maybe Eac3CodingMode)
- eac3Settings_dcFilter :: Lens' Eac3Settings (Maybe Eac3DcFilter)
- eac3Settings_dialnorm :: Lens' Eac3Settings (Maybe Natural)
- eac3Settings_dynamicRangeCompressionLine :: Lens' Eac3Settings (Maybe Eac3DynamicRangeCompressionLine)
- eac3Settings_dynamicRangeCompressionRf :: Lens' Eac3Settings (Maybe Eac3DynamicRangeCompressionRf)
- eac3Settings_lfeControl :: Lens' Eac3Settings (Maybe Eac3LfeControl)
- eac3Settings_lfeFilter :: Lens' Eac3Settings (Maybe Eac3LfeFilter)
- eac3Settings_loRoCenterMixLevel :: Lens' Eac3Settings (Maybe Double)
- eac3Settings_loRoSurroundMixLevel :: Lens' Eac3Settings (Maybe Double)
- eac3Settings_ltRtCenterMixLevel :: Lens' Eac3Settings (Maybe Double)
- eac3Settings_ltRtSurroundMixLevel :: Lens' Eac3Settings (Maybe Double)
- eac3Settings_metadataControl :: Lens' Eac3Settings (Maybe Eac3MetadataControl)
- eac3Settings_passthroughControl :: Lens' Eac3Settings (Maybe Eac3PassthroughControl)
- eac3Settings_phaseControl :: Lens' Eac3Settings (Maybe Eac3PhaseControl)
- eac3Settings_sampleRate :: Lens' Eac3Settings (Maybe Natural)
- eac3Settings_stereoDownmix :: Lens' Eac3Settings (Maybe Eac3StereoDownmix)
- eac3Settings_surroundExMode :: Lens' Eac3Settings (Maybe Eac3SurroundExMode)
- eac3Settings_surroundMode :: Lens' Eac3Settings (Maybe Eac3SurroundMode)
Documentation
data Eac3Settings Source #
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
See: newEac3Settings
smart constructor.
Eac3Settings' | |
|
Instances
newEac3Settings :: Eac3Settings Source #
Create a value of Eac3Settings
with all optional fields omitted.
Use generic-lens or optics to modify other optional fields.
The following record fields are available, with the corresponding lenses provided for backwards compatibility:
$sel:attenuationControl:Eac3Settings'
, eac3Settings_attenuationControl
- If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround
channels. Only used for 3/2 coding mode.
$sel:bitrate:Eac3Settings'
, eac3Settings_bitrate
- Specify the average bitrate in bits per second. The bitrate that you
specify must be a multiple of 8000 within the allowed minimum and
maximum values. Leave blank to use the default bitrate for the coding
mode you select according ETSI TS 102 366. Valid bitrates for coding
mode 1/0: Default: 96000. Minimum: 32000. Maximum: 3024000. Valid
bitrates for coding mode 2/0: Default: 192000. Minimum: 96000. Maximum:
3024000. Valid bitrates for coding mode 3/2: Default: 384000. Minimum:
192000. Maximum: 3024000.
$sel:bitstreamMode:Eac3Settings'
, eac3Settings_bitstreamMode
- Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
For more information about the EAC3 bitstream mode, see ATSC A/52-2012
(Annex E).
$sel:codingMode:Eac3Settings'
, eac3Settings_codingMode
- Dolby Digital Plus coding mode. Determines number of channels.
$sel:dcFilter:Eac3Settings'
, eac3Settings_dcFilter
- Activates a DC highpass filter for all input channels.
$sel:dialnorm:Eac3Settings'
, eac3Settings_dialnorm
- Sets the dialnorm for the output. If blank and input audio is Dolby
Digital Plus, dialnorm will be passed through.
$sel:dynamicRangeCompressionLine:Eac3Settings'
, eac3Settings_dynamicRangeCompressionLine
- Choose the Dolby Digital dynamic range control (DRC) profile that
MediaConvert uses when encoding the metadata in the Dolby Digital stream
for the line operating mode. Related setting: When you use this setting,
MediaConvert ignores any value you provide for Dynamic range compression
profile (DynamicRangeCompressionProfile). For information about the
Dolby Digital DRC operating modes and profiles, see the Dynamic Range
Control chapter of the Dolby Metadata Guide at
https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
$sel:dynamicRangeCompressionRf:Eac3Settings'
, eac3Settings_dynamicRangeCompressionRf
- Choose the Dolby Digital dynamic range control (DRC) profile that
MediaConvert uses when encoding the metadata in the Dolby Digital stream
for the RF operating mode. Related setting: When you use this setting,
MediaConvert ignores any value you provide for Dynamic range compression
profile (DynamicRangeCompressionProfile). For information about the
Dolby Digital DRC operating modes and profiles, see the Dynamic Range
Control chapter of the Dolby Metadata Guide at
https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
$sel:lfeControl:Eac3Settings'
, eac3Settings_lfeControl
- When encoding 3/2 audio, controls whether the LFE channel is enabled
$sel:lfeFilter:Eac3Settings'
, eac3Settings_lfeFilter
- Applies a 120Hz lowpass filter to the LFE channel prior to encoding.
Only valid with 3_2_LFE coding mode.
$sel:loRoCenterMixLevel:Eac3Settings'
, eac3Settings_loRoCenterMixLevel
- Specify a value for the following Dolby Digital Plus setting: Left
only/Right only center mix (Lo/Ro center). MediaConvert uses this
value for downmixing. How the service uses this value depends on the
value that you choose for Stereo downmix (Eac3StereoDownmix). Valid
values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60
mutes the channel. This setting applies only if you keep the default
value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding
mode (Eac3CodingMode). If you choose a different value for Coding mode,
the service ignores Left only/Right only center (loRoCenterMixLevel).
$sel:loRoSurroundMixLevel:Eac3Settings'
, eac3Settings_loRoSurroundMixLevel
- Specify a value for the following Dolby Digital Plus setting: Left
only/Right only (Lo/Ro surround). MediaConvert uses this value for
downmixing. How the service uses this value depends on the value that
you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5,
-3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting
applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs
(CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you
choose a different value for Coding mode, the service ignores Left
only/Right only surround (loRoSurroundMixLevel).
$sel:ltRtCenterMixLevel:Eac3Settings'
, eac3Settings_ltRtCenterMixLevel
- Specify a value for the following Dolby Digital Plus setting: Left
total/Right total center mix (Lt/Rt center). MediaConvert uses this
value for downmixing. How the service uses this value depends on the
value that you choose for Stereo downmix (Eac3StereoDownmix). Valid
values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60
mutes the channel. This setting applies only if you keep the default
value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding
mode (Eac3CodingMode). If you choose a different value for Coding mode,
the service ignores Left total/Right total center (ltRtCenterMixLevel).
$sel:ltRtSurroundMixLevel:Eac3Settings'
, eac3Settings_ltRtSurroundMixLevel
- Specify a value for the following Dolby Digital Plus setting: Left
total/Right total surround mix (Lt/Rt surround). MediaConvert uses
this value for downmixing. How the service uses this value depends on
the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid
values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the
channel. This setting applies only if you keep the default value of 3/2
- L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode
(Eac3CodingMode). If you choose a different value for Coding mode, the
service ignores Left total/Right total surround (ltRtSurroundMixLevel).
$sel:metadataControl:Eac3Settings'
, eac3Settings_metadataControl
- When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD,
DD+, or DolbyE decoder that supplied this audio data. If audio was not
supplied from one of these streams, then the static metadata settings
will be used.
$sel:passthroughControl:Eac3Settings'
, eac3Settings_passthroughControl
- When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it
is present on the input. this detection is dynamic over the life of the
transcode. Inputs that alternate between DD+ and non-DD+ content will
have a consistent DD+ output as the system alternates between
passthrough and encoding.
$sel:phaseControl:Eac3Settings'
, eac3Settings_phaseControl
- Controls the amount of phase-shift applied to the surround channels.
Only used for 3/2 coding mode.
$sel:sampleRate:Eac3Settings'
, eac3Settings_sampleRate
- This value is always 48000. It represents the sample rate in Hz.
$sel:stereoDownmix:Eac3Settings'
, eac3Settings_stereoDownmix
- Choose how the service does stereo downmixing. This setting only applies
if you keep the default value of 3/2 - L, R, C, Ls, Rs
(CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you
choose a different value for Coding mode, the service ignores Stereo
downmix (Eac3StereoDownmix).
$sel:surroundExMode:Eac3Settings'
, eac3Settings_surroundExMode
- When encoding 3/2 audio, sets whether an extra center back surround
channel is matrix encoded into the left and right surround channels.
$sel:surroundMode:Eac3Settings'
, eac3Settings_surroundMode
- When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded
into the two channels.
eac3Settings_attenuationControl :: Lens' Eac3Settings (Maybe Eac3AttenuationControl) Source #
If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.
eac3Settings_bitrate :: Lens' Eac3Settings (Maybe Natural) Source #
Specify the average bitrate in bits per second. The bitrate that you specify must be a multiple of 8000 within the allowed minimum and maximum values. Leave blank to use the default bitrate for the coding mode you select according ETSI TS 102 366. Valid bitrates for coding mode 1/0: Default: 96000. Minimum: 32000. Maximum: 3024000. Valid bitrates for coding mode 2/0: Default: 192000. Minimum: 96000. Maximum: 3024000. Valid bitrates for coding mode 3/2: Default: 384000. Minimum: 192000. Maximum: 3024000.
eac3Settings_bitstreamMode :: Lens' Eac3Settings (Maybe Eac3BitstreamMode) Source #
Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
eac3Settings_codingMode :: Lens' Eac3Settings (Maybe Eac3CodingMode) Source #
Dolby Digital Plus coding mode. Determines number of channels.
eac3Settings_dcFilter :: Lens' Eac3Settings (Maybe Eac3DcFilter) Source #
Activates a DC highpass filter for all input channels.
eac3Settings_dialnorm :: Lens' Eac3Settings (Maybe Natural) Source #
Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.
eac3Settings_dynamicRangeCompressionLine :: Lens' Eac3Settings (Maybe Eac3DynamicRangeCompressionLine) Source #
Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
eac3Settings_dynamicRangeCompressionRf :: Lens' Eac3Settings (Maybe Eac3DynamicRangeCompressionRf) Source #
Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile (DynamicRangeCompressionProfile). For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
eac3Settings_lfeControl :: Lens' Eac3Settings (Maybe Eac3LfeControl) Source #
When encoding 3/2 audio, controls whether the LFE channel is enabled
eac3Settings_lfeFilter :: Lens' Eac3Settings (Maybe Eac3LfeFilter) Source #
Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.
eac3Settings_loRoCenterMixLevel :: Lens' Eac3Settings (Maybe Double) Source #
Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only center (loRoCenterMixLevel).
eac3Settings_loRoSurroundMixLevel :: Lens' Eac3Settings (Maybe Double) Source #
Specify a value for the following Dolby Digital Plus setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left only/Right only surround (loRoSurroundMixLevel).
eac3Settings_ltRtCenterMixLevel :: Lens' Eac3Settings (Maybe Double) Source #
Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total center (ltRtCenterMixLevel).
eac3Settings_ltRtSurroundMixLevel :: Lens' Eac3Settings (Maybe Double) Source #
Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Left total/Right total surround (ltRtSurroundMixLevel).
eac3Settings_metadataControl :: Lens' Eac3Settings (Maybe Eac3MetadataControl) Source #
When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.
eac3Settings_passthroughControl :: Lens' Eac3Settings (Maybe Eac3PassthroughControl) Source #
When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.
eac3Settings_phaseControl :: Lens' Eac3Settings (Maybe Eac3PhaseControl) Source #
Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.
eac3Settings_sampleRate :: Lens' Eac3Settings (Maybe Natural) Source #
This value is always 48000. It represents the sample rate in Hz.
eac3Settings_stereoDownmix :: Lens' Eac3Settings (Maybe Eac3StereoDownmix) Source #
Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you choose a different value for Coding mode, the service ignores Stereo downmix (Eac3StereoDownmix).
eac3Settings_surroundExMode :: Lens' Eac3Settings (Maybe Eac3SurroundExMode) Source #
When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.
eac3Settings_surroundMode :: Lens' Eac3Settings (Maybe Eac3SurroundMode) Source #
When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.