Network.AWS.S3.CreateMultipartUpload

Initiates a multipart upload and returns an upload ID.

Note: After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.

Creating a Request

createMultipartUpload

Arguments

:: BucketName

cmuBucket

-> ObjectKey

cmuKey

-> CreateMultipartUpload

Creates a value of CreateMultipartUpload with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cmuExpires
• cmuGrantReadACP
• cmuSSECustomerAlgorithm
• cmuSSECustomerKey
• cmuRequestPayer
• cmuGrantWriteACP
• cmuWebsiteRedirectLocation
• cmuGrantRead
• cmuStorageClass
• cmuSSECustomerKeyMD5
• cmuSSEKMSKeyId
• cmuGrantFullControl
• cmuContentEncoding
• cmuMetadata
• cmuCacheControl
• cmuContentLanguage
• cmuACL
• cmuContentDisposition
• cmuServerSideEncryption
• cmuContentType
• cmuBucket
• cmuKey

data CreateMultipartUpload

See: createMultipartUpload smart constructor.

Instances

Eq CreateMultipartUpload

Methods

(==) :: CreateMultipartUpload -> CreateMultipartUpload -> Bool

(/=) :: CreateMultipartUpload -> CreateMultipartUpload -> Bool

Data CreateMultipartUpload

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CreateMultipartUpload -> c CreateMultipartUpload

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CreateMultipartUpload

toConstr :: CreateMultipartUpload -> Constr

dataTypeOf :: CreateMultipartUpload -> DataType

dataCast1 :: Typeable (* -> *) t => (forall d. Data d => c (t d)) -> Maybe (c CreateMultipartUpload)

dataCast2 :: Typeable (* -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CreateMultipartUpload)

gmapT :: (forall b. Data b => b -> b) -> CreateMultipartUpload -> CreateMultipartUpload

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CreateMultipartUpload -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CreateMultipartUpload -> r

gmapQ :: (forall d. Data d => d -> u) -> CreateMultipartUpload -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CreateMultipartUpload -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CreateMultipartUpload -> m CreateMultipartUpload

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateMultipartUpload -> m CreateMultipartUpload

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateMultipartUpload -> m CreateMultipartUpload

Read CreateMultipartUpload

Methods

readsPrec :: Int -> ReadS CreateMultipartUpload

readList :: ReadS [CreateMultipartUpload]

readPrec :: ReadPrec CreateMultipartUpload

readListPrec :: ReadPrec [CreateMultipartUpload]

Show CreateMultipartUpload

Methods

showsPrec :: Int -> CreateMultipartUpload -> ShowS

show :: CreateMultipartUpload -> String

showList :: [CreateMultipartUpload] -> ShowS

Generic CreateMultipartUpload

Associated Types

type Rep CreateMultipartUpload :: * -> *

Methods

from :: CreateMultipartUpload -> Rep CreateMultipartUpload x

to :: Rep CreateMultipartUpload x -> CreateMultipartUpload

Hashable CreateMultipartUpload

Methods

hashWithSalt :: Int -> CreateMultipartUpload -> Int

hash :: CreateMultipartUpload -> Int

NFData CreateMultipartUpload

Methods

rnf :: CreateMultipartUpload -> ()

AWSRequest CreateMultipartUpload

Associated Types

type Rs CreateMultipartUpload :: *

Methods

request :: CreateMultipartUpload -> Request CreateMultipartUpload

response :: MonadResource m => Logger -> Service -> Proxy * CreateMultipartUpload -> ClientResponse -> m (Response CreateMultipartUpload)

ToQuery CreateMultipartUpload

Methods

toQuery :: CreateMultipartUpload -> QueryString

ToPath CreateMultipartUpload

Methods

toPath :: CreateMultipartUpload -> ByteString

ToHeaders CreateMultipartUpload

Methods

toHeaders :: CreateMultipartUpload -> [Header]

type Rep CreateMultipartUpload

type Rep CreateMultipartUpload = D1 (MetaData "CreateMultipartUpload" "Network.AWS.S3.CreateMultipartUpload" "amazonka-s3-1.4.1-4f5bQ94cKNG3uuto8KYP6" False) (C1 (MetaCons "CreateMultipartUpload'" PrefixI True) ((:*:) ((:*:) ((:*:) ((:*:) (S1 (MetaSel (Just Symbol "_cmuExpires") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe RFC822))) (S1 (MetaSel (Just Symbol "_cmuGrantReadACP") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuSSECustomerAlgorithm") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuSSECustomerKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe (Sensitive Text)))) (S1 (MetaSel (Just Symbol "_cmuRequestPayer") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe RequestPayer)))))) ((:*:) ((:*:) (S1 (MetaSel (Just Symbol "_cmuGrantWriteACP") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuWebsiteRedirectLocation") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) (S1 (MetaSel (Just Symbol "_cmuGrantRead") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuStorageClass") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe StorageClass))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuSSECustomerKeyMD5") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) (S1 (MetaSel (Just Symbol "_cmuSSEKMSKeyId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe (Sensitive Text)))))))) ((:*:) ((:*:) ((:*:) (S1 (MetaSel (Just Symbol "_cmuGrantFullControl") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) (S1 (MetaSel (Just Symbol "_cmuContentEncoding") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuMetadata") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Map Text Text))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuCacheControl") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) (S1 (MetaSel (Just Symbol "_cmuContentLanguage") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))))) ((:*:) ((:*:) (S1 (MetaSel (Just Symbol "_cmuACL") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe ObjectCannedACL))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuContentDisposition") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) (S1 (MetaSel (Just Symbol "_cmuServerSideEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe ServerSideEncryption))))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuContentType") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) ((:*:) (S1 (MetaSel (Just Symbol "_cmuBucket") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 BucketName)) (S1 (MetaSel (Just Symbol "_cmuKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 ObjectKey))))))))

type Rs CreateMultipartUpload

type Rs CreateMultipartUpload = CreateMultipartUploadResponse

Request Lenses

cmuExpires :: Lens' CreateMultipartUpload (Maybe UTCTime)

The date and time at which the object is no longer cacheable.

cmuGrantReadACP :: Lens' CreateMultipartUpload (Maybe Text)

Allows grantee to read the object ACL.

cmuSSECustomerAlgorithm :: Lens' CreateMultipartUpload (Maybe Text)

Specifies the algorithm to use to when encrypting the object (e.g., AES256).

cmuSSECustomerKey :: Lens' CreateMultipartUpload (Maybe Text)

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm header.

cmuRequestPayer :: Lens' CreateMultipartUpload (Maybe RequestPayer)

Undocumented member.

cmuGrantWriteACP :: Lens' CreateMultipartUpload (Maybe Text)

Allows grantee to write the ACL for the applicable object.

cmuWebsiteRedirectLocation :: Lens' CreateMultipartUpload (Maybe Text)

If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.

cmuGrantRead :: Lens' CreateMultipartUpload (Maybe Text)

Allows grantee to read the object data and its metadata.

cmuStorageClass :: Lens' CreateMultipartUpload (Maybe StorageClass)

The type of storage to use for the object. Defaults to 'STANDARD'.

cmuSSECustomerKeyMD5 :: Lens' CreateMultipartUpload (Maybe Text)

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure the encryption key was transmitted without error.

cmuSSEKMSKeyId :: Lens' CreateMultipartUpload (Maybe Text)

Specifies the AWS KMS key ID to use for object encryption. All GET and PUT requests for an object protected by AWS KMS will fail if not made via SSL or using SigV4. Documentation on configuring any of the officially supported AWS SDKs and CLI can be found at http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version

cmuGrantFullControl :: Lens' CreateMultipartUpload (Maybe Text)

Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.

cmuContentEncoding :: Lens' CreateMultipartUpload (Maybe Text)

Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.

cmuMetadata :: Lens' CreateMultipartUpload (HashMap Text Text)

A map of metadata to store with the object in S3.

cmuCacheControl :: Lens' CreateMultipartUpload (Maybe Text)

Specifies caching behavior along the request/reply chain.

cmuContentLanguage :: Lens' CreateMultipartUpload (Maybe Text)

The language the content is in.

cmuACL :: Lens' CreateMultipartUpload (Maybe ObjectCannedACL)

The canned ACL to apply to the object.

cmuContentDisposition :: Lens' CreateMultipartUpload (Maybe Text)

Specifies presentational information for the object.

cmuServerSideEncryption :: Lens' CreateMultipartUpload (Maybe ServerSideEncryption)

The Server-side encryption algorithm used when storing this object in S3 (e.g., AES256, aws:kms).

cmuContentType :: Lens' CreateMultipartUpload (Maybe Text)

A standard MIME type describing the format of the object data.

cmuBucket :: Lens' CreateMultipartUpload BucketName

Undocumented member.

cmuKey :: Lens' CreateMultipartUpload ObjectKey

Undocumented member.

Destructuring the Response

createMultipartUploadResponse

Arguments

:: Int

cmursResponseStatus

-> CreateMultipartUploadResponse

Creates a value of CreateMultipartUploadResponse with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• cmursRequestCharged
• cmursBucket
• cmursSSECustomerAlgorithm
• cmursAbortDate
• cmursAbortRuleId
• cmursKey
• cmursSSECustomerKeyMD5
• cmursSSEKMSKeyId
• cmursUploadId
• cmursServerSideEncryption
• cmursResponseStatus

data CreateMultipartUploadResponse

See: createMultipartUploadResponse smart constructor.

Instances

Eq CreateMultipartUploadResponse

Methods

(==) :: CreateMultipartUploadResponse -> CreateMultipartUploadResponse -> Bool

(/=) :: CreateMultipartUploadResponse -> CreateMultipartUploadResponse -> Bool

Data CreateMultipartUploadResponse

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> CreateMultipartUploadResponse -> c CreateMultipartUploadResponse

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c CreateMultipartUploadResponse

toConstr :: CreateMultipartUploadResponse -> Constr

dataTypeOf :: CreateMultipartUploadResponse -> DataType

dataCast1 :: Typeable (* -> *) t => (forall d. Data d => c (t d)) -> Maybe (c CreateMultipartUploadResponse)

dataCast2 :: Typeable (* -> * -> *) t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c CreateMultipartUploadResponse)

gmapT :: (forall b. Data b => b -> b) -> CreateMultipartUploadResponse -> CreateMultipartUploadResponse

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> CreateMultipartUploadResponse -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> CreateMultipartUploadResponse -> r

gmapQ :: (forall d. Data d => d -> u) -> CreateMultipartUploadResponse -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> CreateMultipartUploadResponse -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> CreateMultipartUploadResponse -> m CreateMultipartUploadResponse

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateMultipartUploadResponse -> m CreateMultipartUploadResponse

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> CreateMultipartUploadResponse -> m CreateMultipartUploadResponse

Read CreateMultipartUploadResponse

Methods

readsPrec :: Int -> ReadS CreateMultipartUploadResponse

readList :: ReadS [CreateMultipartUploadResponse]

readPrec :: ReadPrec CreateMultipartUploadResponse

readListPrec :: ReadPrec [CreateMultipartUploadResponse]

Show CreateMultipartUploadResponse

Methods

showsPrec :: Int -> CreateMultipartUploadResponse -> ShowS

show :: CreateMultipartUploadResponse -> String

showList :: [CreateMultipartUploadResponse] -> ShowS

Generic CreateMultipartUploadResponse

Associated Types

type Rep CreateMultipartUploadResponse :: * -> *

Methods

from :: CreateMultipartUploadResponse -> Rep CreateMultipartUploadResponse x

to :: Rep CreateMultipartUploadResponse x -> CreateMultipartUploadResponse

NFData CreateMultipartUploadResponse

Methods

rnf :: CreateMultipartUploadResponse -> ()

type Rep CreateMultipartUploadResponse

type Rep CreateMultipartUploadResponse = D1 (MetaData "CreateMultipartUploadResponse" "Network.AWS.S3.CreateMultipartUpload" "amazonka-s3-1.4.1-4f5bQ94cKNG3uuto8KYP6" False) (C1 (MetaCons "CreateMultipartUploadResponse'" PrefixI True) ((:*:) ((:*:) ((:*:) (S1 (MetaSel (Just Symbol "_cmursRequestCharged") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe RequestCharged))) (S1 (MetaSel (Just Symbol "_cmursBucket") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe BucketName)))) ((:*:) (S1 (MetaSel (Just Symbol "_cmursSSECustomerAlgorithm") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) ((:*:) (S1 (MetaSel (Just Symbol "_cmursAbortDate") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe RFC822))) (S1 (MetaSel (Just Symbol "_cmursAbortRuleId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)))))) ((:*:) ((:*:) (S1 (MetaSel (Just Symbol "_cmursKey") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe ObjectKey))) ((:*:) (S1 (MetaSel (Just Symbol "_cmursSSECustomerKeyMD5") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) (S1 (MetaSel (Just Symbol "_cmursSSEKMSKeyId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe (Sensitive Text)))))) ((:*:) (S1 (MetaSel (Just Symbol "_cmursUploadId") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) ((:*:) (S1 (MetaSel (Just Symbol "_cmursServerSideEncryption") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe ServerSideEncryption))) (S1 (MetaSel (Just Symbol "_cmursResponseStatus") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Int)))))))

Response Lenses

cmursRequestCharged :: Lens' CreateMultipartUploadResponse (Maybe RequestCharged)

Undocumented member.

cmursBucket :: Lens' CreateMultipartUploadResponse (Maybe BucketName)

Name of the bucket to which the multipart upload was initiated.

cmursSSECustomerAlgorithm :: Lens' CreateMultipartUploadResponse (Maybe Text)

If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.

cmursAbortDate :: Lens' CreateMultipartUploadResponse (Maybe UTCTime)

Date when multipart upload will become eligible for abort operation by lifecycle.

cmursAbortRuleId :: Lens' CreateMultipartUploadResponse (Maybe Text)

Id of the lifecycle rule that makes a multipart upload eligible for abort operation.

cmursKey :: Lens' CreateMultipartUploadResponse (Maybe ObjectKey)

Object key for which the multipart upload was initiated.

cmursSSECustomerKeyMD5 :: Lens' CreateMultipartUploadResponse (Maybe Text)

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round trip message integrity verification of the customer-provided encryption key.

cmursSSEKMSKeyId :: Lens' CreateMultipartUploadResponse (Maybe Text)

If present, specifies the ID of the AWS Key Management Service (KMS) master encryption key that was used for the object.

cmursUploadId :: Lens' CreateMultipartUploadResponse (Maybe Text)

ID for the initiated multipart upload.

cmursServerSideEncryption :: Lens' CreateMultipartUploadResponse (Maybe ServerSideEncryption)

The Server-side encryption algorithm used when storing this object in S3 (e.g., AES256, aws:kms).

cmursResponseStatus :: Lens' CreateMultipartUploadResponse Int

The response status code.