ansi-terminal-0.10.1: Simple ANSI terminal support, with Windows compatibility

Safe HaskellSafe
LanguageHaskell98

System.Console.ANSI

Contents

Description

Through this module, this library provides platform-independent support for control character sequences following the 'ANSI' standards (see further below) for terminal software that supports those sequences, running on a Unix-like operating system or Windows.

The sequences of control characters (also referred to as 'escape' sequences or codes) provide a rich range of functionality for terminal control, which includes:

  • Colored text output, with control over both foreground and background colors
  • Clearing parts of a line or the screen
  • Hiding or showing the cursor
  • Moving the cursor around
  • Reporting the position of the cursor
  • Scrolling the screen up or down
  • Changing the title of the terminal

A terminal that supports control character sequences acts on them when they are flushed from the output buffer (with a newline character "\n" or, for the standard output channel, hFlush stdout).

The functions moving the cursor to an absolute position are 0-based (the top-left corner is considered to be at row 0 column 0) (see setCursorPosition) and so is getCursorPosition0. The 'ANSI' standards themselves are 1-based (that is, the top-left corner is considered to be at row 1 column 1) and some functions reporting the position of the cursor are too (see reportCursorPosition).

The native terminal software on Windows is 'Command Prompt' or `PowerShell`. Before Windows 10 version 1511 (known as the 'November [2015] Update' or 'Threshold 2') that software did not support such control sequences. For that software, this library also provides support for such sequences by using emulation.

Terminal software other than the native software exists for Windows. One example is the 'mintty' terminal emulator for 'Cygwin', 'MSYS' or 'MSYS2', and dervied projects, and for 'WSL' (Windows Subsystem for Linux).

The 'ANSI' standards refer to (1) standard ECMA-48 `Control Functions for Coded Character Sets' (5th edition, 1991); (2) extensions in ITU-T Recommendation (previously CCITT Recommendation) T.416 (03/93) 'Information Technology – Open Document Architecture (ODA) and Interchange Format: Character Content Architectures` (also published as ISO/IEC International Standard 8613-6); and (3) further extensions used by 'XTerm', a terminal emulator for the X Window System. The escape codes are described in a Wikipedia article at http://en.wikipedia.org/wiki/ANSI_escape_code and those codes supported on current versions of Windows at https://docs.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences.

The whole of the 'ANSI' standards are not supported by this library but most (if not all) of the parts that are popular and well-supported by terminal software are supported. Every function exported by this module comes in three variants, namely:

  • A variant that has an IO () type and doesn't take a Handle (for example, clearScreen :: IO ()). This variant just outputs the `ANSI` command directly to the standard output channel (stdout) and any terminal corresponding to it. Commands issued like this should work as you expect on both Unix-like operating systems and Windows.
  • An 'h...' variant that has an IO () type but takes a Handle (for example, hClearScreen :: Handle -> IO ()). This variant outputs the `ANSI` command to the supplied handle and any terminal corresponding to it. Commands issued like this should also work as you expect on both Unix-like operating systems and Windows.
  • A '...Code' variant that has a String type (for example, clearScreenCode :: String). This variant outputs the sequence of control characters as a String, which can be added to any other bit of text before being output. The use of these codes is generally discouraged because they will not work on legacy versions of Windows where the terminal in use is not ANSI-enabled (see further above). On Windows, where emulation has been necessary, these variants will always output the empty string. That is done so that it is possible to use them portably; for example, coloring console output on the understanding that you will see colors only if you are running on a Unix-like operating system or a version of Windows where emulation has not been necessary. If the control characters are always required, see module System.Console.ANSI.Codes.

Example:

module Main where

import System.Console.ANSI

-- Set colors and write some text in those colors.
main :: IO ()
main = do
  setSGR [SetColor Foreground Vivid Red]
  setSGR [SetColor Background Vivid Blue]
  putStrLn "Red-On-Blue"
  setSGR [Reset]  -- Reset to default colour scheme
  putStrLn "Default colors."

Another example:

module Main where

import System.IO (hFlush, stdout)
import System.Console.ANSI

main :: IO ()
main = do
  setSGR [SetColor Foreground Dull Blue]
  putStr "Enter your name: "
  setSGR [SetColor Foreground Dull Yellow]
  hFlush stdout  -- flush the output buffer before getLine
  name <- getLine
  setSGR [SetColor Foreground Dull Blue]
  putStrLn $ "Hello, " ++ name ++ "!"
  setSGR [Reset]  -- reset to default colour scheme

For many more examples, see the project's extensive Example.hs file.

Synopsis

Basic data types

Cursor movement by character

cursorUp Source #

Arguments

:: Int

Number of lines or characters to move

-> IO () 

cursorDown Source #

Arguments

:: Int

Number of lines or characters to move

-> IO () 

cursorForward Source #

Arguments

:: Int

Number of lines or characters to move

-> IO () 

cursorBackward Source #

Arguments

:: Int

Number of lines or characters to move

-> IO () 

hCursorUp Source #

Arguments

:: Handle 
-> Int

Number of lines or characters to move

-> IO () 

hCursorDown Source #

Arguments

:: Handle 
-> Int

Number of lines or characters to move

-> IO () 

hCursorForward Source #

Arguments

:: Handle 
-> Int

Number of lines or characters to move

-> IO () 

hCursorBackward Source #

Arguments

:: Handle 
-> Int

Number of lines or characters to move

-> IO () 

cursorUpCode Source #

Arguments

:: Int

Number of lines or characters to move

-> String 

cursorDownCode Source #

Arguments

:: Int

Number of lines or characters to move

-> String 

cursorForwardCode Source #

Arguments

:: Int

Number of lines or characters to move

-> String 

cursorBackwardCode Source #

Arguments

:: Int

Number of lines or characters to move

-> String 

Cursor movement by line

The difference between movements "by character" and "by line" is that *Line functions additionally move the cursor to the start of the line, while functions like cursorUp and cursorDown keep the column the same.

Also keep in mind that *Line functions are not as portable. See https://github.com/feuerbach/ansi-terminal/issues/10 for the details.

cursorUpLine Source #

Arguments

:: Int

Number of lines to move

-> IO () 

cursorDownLine Source #

Arguments

:: Int

Number of lines to move

-> IO () 

hCursorUpLine Source #

Arguments

:: Handle 
-> Int

Number of lines to move

-> IO () 

hCursorDownLine Source #

Arguments

:: Handle 
-> Int

Number of lines to move

-> IO () 

cursorUpLineCode Source #

Arguments

:: Int

Number of lines to move

-> String 

cursorDownLineCode Source #

Arguments

:: Int

Number of lines to move

-> String 

Directly changing cursor position

setCursorColumn Source #

Arguments

:: Int

0-based column to move to

-> IO () 

Move the cursor to the specified column. The column numbering is 0-based (that is, the left-most column is numbered 0).

hSetCursorColumn Source #

Arguments

:: Handle 
-> Int

0-based column to move to

-> IO () 

setCursorColumnCode Source #

Arguments

:: Int

0-based column to move to

-> String 

Code to move the cursor to the specified column. The column numbering is 0-based (that is, the left-most column is numbered 0).

setCursorPosition Source #

Arguments

:: Int

0-based row to move to

-> Int

0-based column to move to

-> IO () 

Move the cursor to the specified position (row and column). The position is 0-based (that is, the top-left corner is at row 0 column 0).

hSetCursorPosition Source #

Arguments

:: Handle 
-> Int

0-based row to move to

-> Int

0-based column to move to

-> IO () 

setCursorPositionCode Source #

Arguments

:: Int

0-based row to move to

-> Int

0-based column to move to

-> String 

Code to move the cursor to the specified position (row and column). The position is 0-based (that is, the top-left corner is at row 0 column 0).

Saving, restoring and reporting cursor position

saveCursor :: IO () Source #

Save the cursor position in memory. The only way to access the saved value is with the restoreCursor command.

Since: 0.7.1

saveCursorCode :: String Source #

Since: 0.7.1

restoreCursor :: IO () Source #

Restore the cursor position from memory. There will be no value saved in memory until the first use of the saveCursor command.

Since: 0.7.1

reportCursorPosition :: IO () Source #

Looking for a way to get the cursors position? See getCursorPosition0.

Emit the cursor position into the console input stream, immediately after being recognised on the output stream, as: ESC [ <cursor row> ; <cursor column> R

Note that the information that is emitted is 1-based (the top-left corner is at row 1 column 1) but setCursorColumn and setCursorPosition are 0-based.

In isolation of getReportedCursorPosition or getCursorPosition0, this function may be of limited use on Windows operating systems because of difficulties in obtaining the data emitted into the console input stream. The function hGetBufNonBlocking in module System.IO does not work on Windows. This has been attributed to the lack of non-blocking primatives in the operating system (see the GHC bug report #806 at https://ghc.haskell.org/trac/ghc/ticket/806).

Since: 0.7.1

reportCursorPositionCode :: String Source #

Code to emit the cursor position into the console input stream, immediately after being recognised on the output stream, as: ESC [ <cursor row> ; <cursor column> R

Note that the information that is emitted is 1-based (the top-left corner is at row 1 column 1) but setCursorPositionCode is 0-based.

In isolation of getReportedCursorPosition or getCursorPosition0, this function may be of limited use on Windows operating systems because of difficulties in obtaining the data emitted into the console input stream. The function hGetBufNonBlocking in module System.IO does not work on Windows. This has been attributed to the lack of non-blocking primatives in the operating system (see the GHC bug report #806 at https://ghc.haskell.org/trac/ghc/ticket/806).

Since: 0.7.1

Clearing parts of the screen

Note that these functions only clear parts of the screen. They do not move the cursor.

Scrolling the screen

scrollPageUp Source #

Arguments

:: Int

Number of lines to scroll by

-> IO () 

Scroll the displayed information up or down the terminal: not widely supported

scrollPageDown Source #

Arguments

:: Int

Number of lines to scroll by

-> IO () 

Scroll the displayed information up or down the terminal: not widely supported

hScrollPageUp Source #

Arguments

:: Handle 
-> Int

Number of lines to scroll by

-> IO () 

Scroll the displayed information up or down the terminal: not widely supported

hScrollPageDown Source #

Arguments

:: Handle 
-> Int

Number of lines to scroll by

-> IO () 

Scroll the displayed information up or down the terminal: not widely supported

scrollPageUpCode Source #

Arguments

:: Int

Number of lines to scroll by

-> String 

scrollPageDownCode Source #

Arguments

:: Int

Number of lines to scroll by

-> String 

Select Graphic Rendition mode: colors and other whizzy stuff

setSGR Source #

Arguments

:: [SGR]

Commands: these will typically be applied on top of the current console SGR mode. An empty list of commands is equivalent to the list [Reset]. Commands are applied left to right.

-> IO () 

Set the Select Graphic Rendition mode

hSetSGR Source #

Arguments

:: Handle 
-> [SGR]

Commands: these will typically be applied on top of the current console SGR mode. An empty list of commands is equivalent to the list [Reset]. Commands are applied left to right.

-> IO () 

Set the Select Graphic Rendition mode

setSGRCode Source #

Arguments

:: [SGR]

Commands: these will typically be applied on top of the current console SGR mode. An empty list of commands is equivalent to the list [Reset]. Commands are applied left to right.

-> String 

Cursor visibilty changes

Changing the title

setTitle Source #

Arguments

:: String

New title

-> IO () 

Set the terminal window title

hSetTitle Source #

Arguments

:: Handle 
-> String

New title

-> IO () 

Set the terminal window title

setTitleCode Source #

Arguments

:: String

New Icon Name and Window Title

-> String 

XTerm control sequence to set the Icon Name and Window Title.

Checking if handle supports ANSI (not portable: GHC only)

hSupportsANSI :: Handle -> IO Bool Source #

Use heuristics to determine whether the functions defined in this package will work with a given handle. This function assumes that the handle is writable (that is, it manages output - see hIsWritable).

For Unix-like operating systems, the current implementation checks that: (1) the handle is a terminal; and (2) a TERM environment variable is not set to dumb (which is what the GNU Emacs text editor sets for its integrated terminal).

For Windows, the current implementation performs the same checks as for Unix-like operating systems and, as an alternative, checks whether the handle is connected to a 'mintty' terminal. (That is because the function hIsTerminalDevice is used to check if the handle is a terminal. However, where a non-native Windows terminal (such as 'mintty') is implemented using redirection, that function will not identify a handle to the terminal as a terminal.) On Windows 10, if the handle is identified as connected to a native terminal, this function does not enable the processing of 'ANSI' control characters in output (see hSupportsANSIWithoutEmulation).

Since: 0.6.2

hSupportsANSIColor :: Handle -> IO Bool Source #

Some terminals (e.g. Emacs) are not fully ANSI compliant but can support ANSI colors. This can be used in such cases, if colors are all that is needed.

Since: 0.9

hSupportsANSIWithoutEmulation :: Handle -> IO (Maybe Bool) Source #

Use heuristics to determine whether a given handle will support 'ANSI' control characters in output. (On Windows versions before Windows 10, that means 'support without emulation'.)

If the handle is not writable (that is, it cannot manage output - see hIsWritable), then return (Just False) is returned.

On Unix-like operating systems, with one exception, the function is consistent with hSupportsANSI. The exception is if the handle is not writable.

On Windows, what is returned will depend on what the handle is connected to and the version of the operating system. If the handle is identified as connected to a 'mintty' terminal, return (Just True) is returned. If it is identifed as connected to a native terminal, then, on Windows 10, the processing of 'ANSI' control characters will be enabled and return (Just True) returned; and, on versions of Windows before Windows 10, return (Just False) is returned. Otherwise, if a TERM environment variable is set to dumb, return (Just False) is returned. In all other cases of a writable handle, return Nothing is returned; this indicates that the heuristics cannot assist - the handle may be connected to a file or to another type of terminal.

Since: 0.8.1

Getting the cursor position

getCursorPosition0 :: IO (Maybe (Int, Int)) Source #

Attempts to get the reported cursor position, combining the functions reportCursorPosition, getReportedCursorPosition and cursorPosition. Any position (row, column) is translated to be 0-based (that is, the top-left corner is at (0, 0)), consistent with setCursorColumn and setCursorPosition. (Note that the information emitted into the console input stream by reportCursorPosition is 1-based.) Returns Nothing if any data emitted by reportCursorPosition, obtained by getReportedCursorPosition, cannot be parsed by cursorPosition. Uses stdout. If stdout will be redirected, see hGetCursorPosition for a more general function.

On Windows operating systems, the function is not supported on consoles, such as mintty, that are not based on the Win32 console of the Windows API. (Command Prompt and PowerShell are based on the Win32 console.)

Since: 0.8.2

hGetCursorPosition :: Handle -> IO (Maybe (Int, Int)) Source #

Attempts to get the reported cursor position, combining the functions hReportCursorPosition (with the specified handle), getReportedCursorPosition and cursorPosition. Any position (row, column) is translated to be 0-based (that is, the top-left corner is at (0, 0)), consistent with hSetCursorColumn and hSetCursorPosition. (Note that the information emitted into the console input stream by hReportCursorPosition is 1-based.) Returns Nothing if any data emitted by hReportCursorPosition, obtained by getReportedCursorPosition, cannot be parsed by cursorPosition.

On Windows operating systems, the function is not supported on consoles, such as mintty, that are not based on the Win32 console of the Windows API. (Command Prompt and PowerShell are based on the Win32 console.)

Since: 0.10.1

getReportedCursorPosition :: IO String Source #

Attempts to get the reported cursor position data from the console input stream. The function is intended to be called immediately after reportCursorPosition (or related functions) have caused characters to be emitted into the stream.

For example, on a Unix-like operating system:

hSetBuffering stdin NoBuffering -- set no buffering (the contents of the
                                -- buffer will be discarded, so this needs
                                -- to be done before the cursor positon is
                                -- emitted)
reportCursorPosition
hFlush stdout -- ensure the report cursor position code is sent to the
              -- operating system
input <- getReportedCursorPosition

On Windows operating systems, the function is not supported on consoles, such as mintty, that are not based on the Win32 console of the Windows API. (Command Prompt and PowerShell are based on the Win32 console.)

Since: 0.7.1

cursorPosition :: ReadP (Int, Int) Source #

Parses the characters emitted by reportCursorPosition into the console input stream. Returns the cursor row and column as a tuple.

For example, if the characters emitted by reportCursorPosition are in String input then the parser could be applied like this:

let result = readP_to_S cursorPosition input
case result of
    [] -> putStrLn $ "Error: could not parse " ++ show input
    [((row, column), _)] -> putStrLn $ "The cursor was at row " ++ show row
        ++ " and column" ++ show column ++ "."
    (_:_) -> putStrLn $ "Error: parse not unique"

Since: 0.7.1

Getting the terminal size

getTerminalSize :: IO (Maybe (Int, Int)) Source #

Attempts to get the current terminal size (height in rows, width in columns), by using getCursorPosition0 to query the console input stream after attempting to set the cursor position beyond the bottom right corner of the terminal. Uses stdout. If stdout will be redirected, see hGetTerminalSize for a more general function.

On Windows operating systems, the function is not supported on consoles, such as mintty, that are not based on the Win32 console of the Windows API. (Command Prompt and PowerShell are based on the Win32 console.)

Since: 0.9

hGetTerminalSize :: Handle -> IO (Maybe (Int, Int)) Source #

Attempts to get the current terminal size (height in rows, width in columns), by writing control character sequences to the specified handle (which will typically be stdout or stderr) and using hGetCursorPosition to query the console input stream after attempting to set the cursor position beyond the bottom right corner of the terminal.

On Windows operating systems, the function is not supported on consoles, such as mintty, that are not based on the Win32 console of the Windows API. (Command Prompt and PowerShell are based on the Win32 console.)

Since: 0.10.1