bloodhound- ElasticSearch client library for Haskell

Copyright(C) 2014 Chris Allen
LicenseBSD-style (see the file LICENSE)
MaintainerChris Allen <
Safe HaskellNone




Client side functions for talking to Elasticsearch servers.


Bloodhound client functions

The examples in this module assume the following code has been run. The :{ and :} will only work in GHCi. You'll only need the data types and typeclass instances for the functions that make use of them.

withBH :: ManagerSettings -> Server -> BH IO a -> IO a Source #

Convenience function that sets up a manager and BHEnv and runs the given set of bloodhound operations. Connections will be pipelined automatically in accordance with the given manager settings in IO. If you've got your own monad transformer stack, you should use runBH directly.


createIndex :: MonadBH m => IndexSettings -> IndexName -> m Reply Source #

createIndex will create an index given a Server, IndexSettings, and an IndexName.

deleteIndex :: MonadBH m => IndexName -> m Reply Source #

deleteIndex will delete an index given a Server, and an IndexName.

updateIndexSettings :: MonadBH m => NonEmpty UpdatableIndexSetting -> IndexName -> m Reply Source #

updateIndexSettings will apply a non-empty list of setting updates to an index

optimizeIndex :: MonadBH m => IndexSelection -> IndexOptimizationSettings -> m Reply Source #

optimizeIndex will optimize a single index, list of indexes or all indexes. Note that this call will block until finishing but will continue even if the request times out. Concurrent requests to optimize an index while another is performing will block until the previous one finishes. For more information see Nothing worthwhile comes back in the reply body, so matching on the status should suffice.

optimizeIndex with a maxNumSegments of 1 and onlyExpungeDeletes to True is the main way to release disk space back to the OS being held by deleted documents.

Note that this API was deprecated in ElasticSearch 2.1 for the almost completely identical forcemerge API. Adding support to that API would be trivial but due to the significant breaking changes, this library cannot currently be used with >= 2.0, so that feature was omitted.

indexExists :: MonadBH m => IndexName -> m Bool Source #

indexExists enables you to check if an index exists. Returns Bool in IO

listIndices :: (MonadThrow m, MonadBH m) => m [IndexName] Source #

listIndices returns a list of all index names on a given Server

waitForYellowIndex :: MonadBH m => IndexName -> m Reply Source #

Block until the index becomes available for indexing documents. This is useful for integration tests in which indices are rapidly created and deleted.

Index Aliases

updateIndexAliases :: MonadBH m => NonEmpty IndexAliasAction -> m Reply Source #

updateIndexAliases updates the server's index alias table. Operations are atomic. Explained in further detail at

getIndexAliases :: (MonadBH m, MonadThrow m) => m (Either EsError IndexAliasesSummary) Source #

Get all aliases configured on the server.

Index Templates

templateExists :: MonadBH m => TemplateName -> m Bool Source #

templateExists checks to see if a template exists.

deleteTemplate :: MonadBH m => TemplateName -> m Reply Source #

deleteTemplate is an HTTP DELETE and deletes a template.


putMapping :: (MonadBH m, ToJSON a) => IndexName -> MappingName -> a -> m Reply Source #

putMapping is an HTTP PUT and has upsert semantics. Mappings are schemas for documents in indexes.

deleteMapping :: MonadBH m => IndexName -> MappingName -> m Reply Source #

deleteMapping is an HTTP DELETE and deletes a mapping for a given index. Mappings are schemas for documents in indexes.


indexDocument :: (ToJSON doc, MonadBH m) => IndexName -> MappingName -> IndexDocumentSettings -> doc -> DocId -> m Reply Source #

indexDocument is the primary way to save a single document in Elasticsearch. The document itself is simply something we can convert into a JSON Value. The DocId will function as the primary key for the document.

updateDocument :: (ToJSON patch, MonadBH m) => IndexName -> MappingName -> IndexDocumentSettings -> patch -> DocId -> m Reply Source #

updateDocument provides a way to perform an partial update of a an already indexed document.

getDocument :: MonadBH m => IndexName -> MappingName -> DocId -> m Reply Source #

getDocument is a straight-forward way to fetch a single document from Elasticsearch using a Server, IndexName, MappingName, and a DocId. The DocId is the primary key for your Elasticsearch document.

documentExists :: MonadBH m => IndexName -> MappingName -> Maybe DocumentParent -> DocId -> m Bool Source #

documentExists enables you to check if a document exists. Returns Bool in IO

deleteDocument :: MonadBH m => IndexName -> MappingName -> DocId -> m Reply Source #

deleteDocument is the primary way to delete a single document.


searchAll :: MonadBH m => Search -> m Reply Source #

searchAll, given a Search, will perform that search against all indexes on an Elasticsearch server. Try to avoid doing this if it can be helped.

searchByIndex :: MonadBH m => IndexName -> Search -> m Reply Source #

searchByIndex, given a Search and an IndexName, will perform that search against all mappings within an index on an Elasticsearch server.

searchByType :: MonadBH m => IndexName -> MappingName -> Search -> m Reply Source #

searchByType, given a Search, IndexName, and MappingName, will perform that search against a specific mapping within an index on an Elasticsearch server.

scanSearch :: (FromJSON a, MonadBH m, MonadThrow m) => IndexName -> MappingName -> Search -> m [Hit a] Source #

scanSearch uses the 'scan&scroll' API of elastic, for a given IndexName and MappingName. Note that this will consume the entire search result set and will be doing O(n) list appends so this may not be suitable for large result sets. In that case, getInitialScroll and advanceScroll are good low level tools. You should be able to hook them up trivially to conduit, pipes, or your favorite streaming IO abstraction of choice. Note that ordering on the search would destroy performance and thus is ignored.

getInitialScroll :: MonadBH m => IndexName -> MappingName -> Search -> m (Maybe ScrollId) Source #

For a given scearch, request a scroll for efficient streaming of search results. Note that the search is put into SearchTypeScan mode and thus results will not be sorted. Combine this with advanceScroll to efficiently stream through the full result set

advanceScroll Source #


:: (FromJSON a, MonadBH m, MonadThrow m) 
=> ScrollId 
-> NominalDiffTime

How long should the snapshot of data be kept around? This timeout is updated every time advanceScroll is used, so don't feel the need to set it to the entire duration of your search processing. Note that durations < 1s will be rounded up. Also note that NominalDiffTime is an instance of Num so literals like 60 will be interpreted as seconds. 60s is a reasonable default.

-> m (Either EsError (SearchResult a)) 

Use the given scroll to fetch the next page of documents. If there are no further pages, 'SearchResult.searchHits.hits' will be '[]'.

refreshIndex :: MonadBH m => IndexName -> m Reply Source #

refreshIndex will force a refresh on an index. You must do this if you want to read what you wrote.

mkSearch :: Maybe Query -> Maybe Filter -> Search Source #

mkSearch is a helper function for defaulting additional fields of a Search to Nothing in case you only care about your Query and Filter. Use record update syntax if you want to add things like aggregations or highlights while still using this helper function.

mkAggregateSearch :: Maybe Query -> Aggregations -> Search Source #

mkAggregateSearch is a helper function that defaults everything in a Search except for the Query and the Aggregation.

mkHighlightSearch :: Maybe Query -> Highlights -> Search Source #

mkHighlightSearch is a helper function that defaults everything in a Search except for the Query and the Aggregation.

bulk :: MonadBH m => Vector BulkOperation -> m Reply Source #

bulk uses Elasticsearch's bulk API to perform bulk operations. The BulkOperation data type encodes the index/update/delete/create operations. You pass a Vector of BulkOperations and a Server to bulk in order to send those operations up to your Elasticsearch server to be performed. I changed from [BulkOperation] to a Vector due to memory overhead.

pageSearch Source #


:: From

The result offset

-> Size

The number of results to return

-> Search

The current seach

-> Search

The paged search

pageSearch is a helper function that takes a search and assigns the from and size fields for the search. The from parameter defines the offset from the first result you want to fetch. The size parameter allows you to configure the maximum amount of hits to be returned.

mkShardCount :: Int -> Maybe ShardCount Source #

mkShardCount is a straight-forward smart constructor for ShardCount which rejects Int values below 1 and above 1000.

mkReplicaCount :: Int -> Maybe ReplicaCount Source #

mkReplicaCount is a straight-forward smart constructor for ReplicaCount which rejects Int values below 0 and above 1000.


Snapshot Repos

getSnapshotRepos :: (MonadBH m, MonadThrow m) => SnapshotRepoSelection -> m (Either EsError [GenericSnapshotRepo]) Source #

getSnapshotRepos gets the definitions of a subset of the defined snapshot repos.

updateSnapshotRepo Source #


:: (MonadBH m, SnapshotRepo repo) 
=> SnapshotRepoUpdateSettings

Use defaultSnapshotRepoUpdateSettings if unsure

-> repo 
-> m Reply 

Create or update a snapshot repo

verifySnapshotRepo :: (MonadBH m, MonadThrow m) => SnapshotRepoName -> m (Either EsError SnapshotVerification) Source #

Verify if a snapshot repo is working. NOTE: this API did not make it into ElasticSearch until 1.4. If you use an older version, you will get an error here.


getSnapshots :: (MonadBH m, MonadThrow m) => SnapshotRepoName -> SnapshotSelection -> m (Either EsError [SnapshotInfo]) Source #

Get info about known snapshots given a pattern and repo name.

deleteSnapshot :: MonadBH m => SnapshotRepoName -> SnapshotName -> m Reply Source #

Delete a snapshot. Cancels if it is running.

Restoring Snapshots

restoreSnapshot Source #


:: MonadBH m 
=> SnapshotRepoName 
-> SnapshotName 
-> SnapshotRestoreSettings

Start with defaultSnapshotRestoreSettings and customize from there for reasonable defaults.

-> m Reply 


Request Utilities

encodeBulkOperations :: Vector BulkOperation -> ByteString Source #

encodeBulkOperations is a convenience function for dumping a vector of BulkOperation into an ByteString

encodeBulkOperation :: BulkOperation -> ByteString Source #

encodeBulkOperation is a convenience function for dumping a single BulkOperation into an ByteString


basicAuthHook :: Monad m => EsUsername -> EsPassword -> Request -> m Request Source #

This is a hook that can be set via the bhRequestHook function that will authenticate all requests using an HTTP Basic Authentication header. Note that it is *strongly* recommended that this option only be used over an SSL connection.

> (mkBHEnv myServer myManager) { bhRequestHook = basicAuthHook (EsUsername "myuser") (EsPassword "mypass") }

Reply-handling tools

isVersionConflict :: Reply -> Bool Source #

Was there an optimistic concurrency control conflict when indexing a document?

parseEsResponse :: (MonadThrow m, FromJSON a) => Reply -> m (Either EsError a) Source #

Tries to parse a response body as the expected type a and failing that tries to parse it as an EsError. All well-formed, JSON responses from elasticsearch should fall into these two categories. If they don't, a EsProtocolException will be thrown. If you encounter this, please report the full body it reports along with your ElasticSearch verison.