containers-0.6.3.1: Assorted concrete container types

Data.Set

Description

Finite Sets

The Set e type represents a set of elements of type e. Most operations require that e be an instance of the Ord class. A Set is strict in its elements.

For a walkthrough of the most commonly used functions see the sets introduction.

Note that the implementation is generally left-biased. Functions that take two sets as arguments and combine them, such as union and intersection, prefer the entries in the first argument to those in the second. Of course, this bias can only be observed when equality is an equivalence relation instead of structural equality.

These modules are intended to be imported qualified, to avoid name clashes with Prelude functions, e.g.

 import Data.Set (Set)
import qualified Data.Set as Set

Warning

The size of the set must not exceed maxBound::Int. Violation of this condition is not detected and if the size limit is exceeded, its behaviour is undefined.

Implementation

The implementation of Set is based on size balanced binary trees (or trees of bounded balance) as described by:

• Stephen Adams, "Efficient sets: a balancing act", Journal of Functional Programming 3(4):553-562, October 1993, http://www.swiss.ai.mit.edu/~adams/BB/.
• J. Nievergelt and E.M. Reingold, "Binary search trees of bounded balance", SIAM journal of computing 2(1), March 1973.

Bounds for union, intersection, and difference are as given by

Synopsis

Set type

data Set a Source #

A set of values a.

Instances

Construction

O(1). The empty set.

singleton :: a -> Set a Source #

O(1). Create a singleton set.

fromList :: Ord a => [a] -> Set a Source #

O(n*log n). Create a set from a list of elements.

If the elements are ordered, a linear-time implementation is used, with the performance equal to fromDistinctAscList.

fromAscList :: Eq a => [a] -> Set a Source #

O(n). Build a set from an ascending list in linear time. The precondition (input list is ascending) is not checked.

fromDescList :: Eq a => [a] -> Set a Source #

O(n). Build a set from a descending list in linear time. The precondition (input list is descending) is not checked.

Since: 0.5.8

fromDistinctAscList :: [a] -> Set a Source #

O(n). Build a set from an ascending list of distinct elements in linear time. The precondition (input list is strictly ascending) is not checked.

fromDistinctDescList :: [a] -> Set a Source #

O(n). Build a set from a descending list of distinct elements in linear time. The precondition (input list is strictly descending) is not checked.

powerSet :: Set a -> Set (Set a) Source #

Calculate the power set of a set: the set of all its subsets.

t member powerSet s == t isSubsetOf s


Example:

powerSet (fromList [1,2,3]) =
fromList $map fromList [[],[1],[1,2],[1,2,3],[1,3],[2],[2,3],[3]]  Since: 0.5.11 Insertion insert :: Ord a => a -> Set a -> Set a Source # O(log n). Insert an element in a set. If the set already contains an element equal to the given value, it is replaced with the new value. Deletion delete :: Ord a => a -> Set a -> Set a Source # O(log n). Delete an element from a set. Generalized insertion/deletion alterF :: (Ord a, Functor f) => (Bool -> f Bool) -> a -> Set a -> f (Set a) Source # O(log n) (alterF f x s) can delete or insert x in s depending on whether an equal element is found in s. In short: member x <$> alterF f x s = f (member x s)


Note that unlike insert, alterF will not replace an element equal to the given value.

Note: alterF is a variant of the at combinator from Control.Lens.At.

Since: 0.6.3.1

Query

member :: Ord a => a -> Set a -> Bool Source #

O(log n). Is the element in the set?

notMember :: Ord a => a -> Set a -> Bool Source #

O(log n). Is the element not in the set?

lookupLT :: Ord a => a -> Set a -> Maybe a Source #

O(log n). Find largest element smaller than the given one.

lookupLT 3 (fromList [3, 5]) == Nothing
lookupLT 5 (fromList [3, 5]) == Just 3

lookupGT :: Ord a => a -> Set a -> Maybe a Source #

O(log n). Find smallest element greater than the given one.

lookupGT 4 (fromList [3, 5]) == Just 5
lookupGT 5 (fromList [3, 5]) == Nothing

lookupLE :: Ord a => a -> Set a -> Maybe a Source #

O(log n). Find largest element smaller or equal to the given one.

lookupLE 2 (fromList [3, 5]) == Nothing
lookupLE 4 (fromList [3, 5]) == Just 3
lookupLE 5 (fromList [3, 5]) == Just 5

lookupGE :: Ord a => a -> Set a -> Maybe a Source #

O(log n). Find smallest element greater or equal to the given one.

lookupGE 3 (fromList [3, 5]) == Just 3
lookupGE 4 (fromList [3, 5]) == Just 5
lookupGE 6 (fromList [3, 5]) == Nothing

null :: Set a -> Bool Source #

O(1). Is this the empty set?

size :: Set a -> Int Source #

O(1). The number of elements in the set.

isSubsetOf :: Ord a => Set a -> Set a -> Bool Source #

O(m*log(n/m + 1)), m <= n. (s1 isSubsetOf s2) indicates whether s1 is a subset of s2.

s1 isSubsetOf s2 = all (member s2) s1
s1 isSubsetOf s2 = null (s1 difference s2)
s1 isSubsetOf s2 = s1 union s2 == s2
s1 isSubsetOf s2 = s1 intersection s2 == s1


isProperSubsetOf :: Ord a => Set a -> Set a -> Bool Source #

O(m*log(n/m + 1)), m <= n. (s1 isProperSubsetOf s2) indicates whether s1 is a proper subset of s2.

s1 isProperSubsetOf s2 = s1 isSubsetOf s2 && s1 /= s2


disjoint :: Ord a => Set a -> Set a -> Bool Source #

O(m*log(n/m + 1)), m <= n. Check whether two sets are disjoint (i.e., their intersection is empty).

disjoint (fromList [2,4,6])   (fromList [1,3])     == True
disjoint (fromList [2,4,6,8]) (fromList [2,3,5,7]) == False
disjoint (fromList [1,2])     (fromList [1,2,3,4]) == False
disjoint (fromList [])        (fromList [])        == True
xs disjoint ys = null (xs intersection ys)


Since: 0.5.11

Combine

union :: Ord a => Set a -> Set a -> Set a Source #

O(m*log(n/m + 1)), m <= n. The union of two sets, preferring the first set when equal elements are encountered.

unions :: (Foldable f, Ord a) => f (Set a) -> Set a Source #

The union of the sets in a Foldable structure : (unions == foldl union empty).

difference :: Ord a => Set a -> Set a -> Set a Source #

O(m*log(n/m + 1)), m <= n. Difference of two sets.

(\\) :: Ord a => Set a -> Set a -> Set a infixl 9 Source #

O(m*log(n/m+1)), m <= n. See difference.

intersection :: Ord a => Set a -> Set a -> Set a Source #

O(m*log(n/m + 1)), m <= n. The intersection of two sets. Elements of the result come from the first set, so for example

import qualified Data.Set as S
data AB = A | B deriving Show
instance Ord AB where compare _ _ = EQ
instance Eq AB where _ == _ = True
main = print (S.singleton A S.intersection S.singleton B,
S.singleton B S.intersection S.singleton A)

prints (fromList [A],fromList [B]).

cartesianProduct :: Set a -> Set b -> Set (a, b) Source #

O(m*n) (conjectured). Calculate the Cartesian product of two sets.

cartesianProduct xs ys = fromList $liftA2 (,) (toList xs) (toList ys)  Example: cartesianProduct (fromList [1,2]) (fromList ['a','b']) = fromList [(1,'a'), (1,'b'), (2,'a'), (2,'b')]  Since: 0.5.11 disjointUnion :: Set a -> Set b -> Set (Either a b) Source # Calculate the disjoint union of two sets.  disjointUnion xs ys = map Left xs union map Right ys Example: disjointUnion (fromList [1,2]) (fromList ["hi", "bye"]) = fromList [Left 1, Left 2, Right "hi", Right "bye"]  Since: 0.5.11 Filter filter :: (a -> Bool) -> Set a -> Set a Source # O(n). Filter all elements that satisfy the predicate. takeWhileAntitone :: (a -> Bool) -> Set a -> Set a Source # O(log n). Take while a predicate on the elements holds. The user is responsible for ensuring that for all elements j and k in the set, j < k ==> p j >= p k. See note at spanAntitone. takeWhileAntitone p = fromDistinctAscList . takeWhile p . toList takeWhileAntitone p = filter p  Since: 0.5.8 dropWhileAntitone :: (a -> Bool) -> Set a -> Set a Source # O(log n). Drop while a predicate on the elements holds. The user is responsible for ensuring that for all elements j and k in the set, j < k ==> p j >= p k. See note at spanAntitone. dropWhileAntitone p = fromDistinctAscList . dropWhile p . toList dropWhileAntitone p = filter (not . p)  Since: 0.5.8 spanAntitone :: (a -> Bool) -> Set a -> (Set a, Set a) Source # O(log n). Divide a set at the point where a predicate on the elements stops holding. The user is responsible for ensuring that for all elements j and k in the set, j < k ==> p j >= p k. spanAntitone p xs = (takeWhileAntitone p xs, dropWhileAntitone p xs) spanAntitone p xs = partition p xs  Note: if p is not actually antitone, then spanAntitone will split the set at some unspecified point where the predicate switches from holding to not holding (where the predicate is seen to hold before the first element and to fail after the last element). Since: 0.5.8 partition :: (a -> Bool) -> Set a -> (Set a, Set a) Source # O(n). Partition the set into two sets, one with all elements that satisfy the predicate and one with all elements that don't satisfy the predicate. See also split. split :: Ord a => a -> Set a -> (Set a, Set a) Source # O(log n). The expression (split x set) is a pair (set1,set2) where set1 comprises the elements of set less than x and set2 comprises the elements of set greater than x. splitMember :: Ord a => a -> Set a -> (Set a, Bool, Set a) Source # O(log n). Performs a split but also returns whether the pivot element was found in the original set. splitRoot :: Set a -> [Set a] Source # O(1). Decompose a set into pieces based on the structure of the underlying tree. This function is useful for consuming a set in parallel. No guarantee is made as to the sizes of the pieces; an internal, but deterministic process determines this. However, it is guaranteed that the pieces returned will be in ascending order (all elements in the first subset less than all elements in the second, and so on). Examples: splitRoot (fromList [1..6]) == [fromList [1,2,3],fromList [4],fromList [5,6]] splitRoot empty == [] Note that the current implementation does not return more than three subsets, but you should not depend on this behaviour because it can change in the future without notice. Since: 0.5.4 Indexed lookupIndex :: Ord a => a -> Set a -> Maybe Int Source # O(log n). Lookup the index of an element, which is its zero-based index in the sorted sequence of elements. The index is a number from 0 up to, but not including, the size of the set. isJust (lookupIndex 2 (fromList [5,3])) == False fromJust (lookupIndex 3 (fromList [5,3])) == 0 fromJust (lookupIndex 5 (fromList [5,3])) == 1 isJust (lookupIndex 6 (fromList [5,3])) == False Since: 0.5.4 findIndex :: Ord a => a -> Set a -> Int Source # O(log n). Return the index of an element, which is its zero-based index in the sorted sequence of elements. The index is a number from 0 up to, but not including, the size of the set. Calls error when the element is not a member of the set. findIndex 2 (fromList [5,3]) Error: element is not in the set findIndex 3 (fromList [5,3]) == 0 findIndex 5 (fromList [5,3]) == 1 findIndex 6 (fromList [5,3]) Error: element is not in the set Since: 0.5.4 elemAt :: Int -> Set a -> a Source # O(log n). Retrieve an element by its index, i.e. by its zero-based index in the sorted sequence of elements. If the index is out of range (less than zero, greater or equal to size of the set), error is called. elemAt 0 (fromList [5,3]) == 3 elemAt 1 (fromList [5,3]) == 5 elemAt 2 (fromList [5,3]) Error: index out of range Since: 0.5.4 deleteAt :: Int -> Set a -> Set a Source # O(log n). Delete the element at index, i.e. by its zero-based index in the sorted sequence of elements. If the index is out of range (less than zero, greater or equal to size of the set), error is called. deleteAt 0 (fromList [5,3]) == singleton 5 deleteAt 1 (fromList [5,3]) == singleton 3 deleteAt 2 (fromList [5,3]) Error: index out of range deleteAt (-1) (fromList [5,3]) Error: index out of range Since: 0.5.4 take :: Int -> Set a -> Set a Source # Take a given number of elements in order, beginning with the smallest ones. take n = fromDistinctAscList . take n . toAscList  Since: 0.5.8 drop :: Int -> Set a -> Set a Source # Drop a given number of elements in order, beginning with the smallest ones. drop n = fromDistinctAscList . drop n . toAscList  Since: 0.5.8 splitAt :: Int -> Set a -> (Set a, Set a) Source # O(log n). Split a set at a particular index. splitAt !n !xs = (take n xs, drop n xs)  Map map :: Ord b => (a -> b) -> Set a -> Set b Source # O(n*log n). map f s is the set obtained by applying f to each element of s. It's worth noting that the size of the result may be smaller if, for some (x,y), x /= y && f x == f y mapMonotonic :: (a -> b) -> Set a -> Set b Source # O(n). The mapMonotonic f s == map f s, but works only when f is strictly increasing. The precondition is not checked. Semi-formally, we have: and [x < y ==> f x < f y | x <- ls, y <- ls] ==> mapMonotonic f s == map f s where ls = toList s Folds foldr :: (a -> b -> b) -> b -> Set a -> b Source # O(n). Fold the elements in the set using the given right-associative binary operator, such that foldr f z == foldr f z . toAscList. For example, toAscList set = foldr (:) [] set foldl :: (a -> b -> a) -> a -> Set b -> a Source # O(n). Fold the elements in the set using the given left-associative binary operator, such that foldl f z == foldl f z . toAscList. For example, toDescList set = foldl (flip (:)) [] set Strict folds foldr' :: (a -> b -> b) -> b -> Set a -> b Source # O(n). A strict version of foldr. Each application of the operator is evaluated before using the result in the next application. This function is strict in the starting value. foldl' :: (a -> b -> a) -> a -> Set b -> a Source # O(n). A strict version of foldl. Each application of the operator is evaluated before using the result in the next application. This function is strict in the starting value. Legacy folds fold :: (a -> b -> b) -> b -> Set a -> b Source # O(n). Fold the elements in the set using the given right-associative binary operator. This function is an equivalent of foldr and is present for compatibility only. Please note that fold will be deprecated in the future and removed. Min/Max lookupMin :: Set a -> Maybe a Source # O(log n). The minimal element of a set. Since: 0.5.9 lookupMax :: Set a -> Maybe a Source # O(log n). The maximal element of a set. Since: 0.5.9 findMin :: Set a -> a Source # O(log n). The minimal element of a set. findMax :: Set a -> a Source # O(log n). The maximal element of a set. deleteMin :: Set a -> Set a Source # O(log n). Delete the minimal element. Returns an empty set if the set is empty. deleteMax :: Set a -> Set a Source # O(log n). Delete the maximal element. Returns an empty set if the set is empty. deleteFindMin :: Set a -> (a, Set a) Source # O(log n). Delete and find the minimal element. deleteFindMin set = (findMin set, deleteMin set) deleteFindMax :: Set a -> (a, Set a) Source # O(log n). Delete and find the maximal element. deleteFindMax set = (findMax set, deleteMax set) maxView :: Set a -> Maybe (a, Set a) Source # O(log n). Retrieves the maximal key of the set, and the set stripped of that element, or Nothing if passed an empty set. minView :: Set a -> Maybe (a, Set a) Source # O(log n). Retrieves the minimal key of the set, and the set stripped of that element, or Nothing if passed an empty set. Conversion List elems :: Set a -> [a] Source # O(n). An alias of toAscList. The elements of a set in ascending order. Subject to list fusion. toList :: Set a -> [a] Source # O(n). Convert the set to a list of elements. Subject to list fusion. toAscList :: Set a -> [a] Source # O(n). Convert the set to an ascending list of elements. Subject to list fusion. toDescList :: Set a -> [a] Source # O(n). Convert the set to a descending list of elements. Subject to list fusion. Debugging showTree :: Show a => Set a -> String Source # O(n). Show the tree that implements the set. The tree is shown in a compressed, hanging format. showTreeWith :: Show a => Bool -> Bool -> Set a -> String Source # O(n). The expression (showTreeWith hang wide map) shows the tree that implements the set. If hang is True, a hanging tree is shown otherwise a rotated tree is shown. If wide is True, an extra wide version is shown. Set> putStrLn$ showTreeWith True False $fromDistinctAscList [1..5] 4 +--2 | +--1 | +--3 +--5 Set> putStrLn$ showTreeWith True True $fromDistinctAscList [1..5] 4 | +--2 | | | +--1 | | | +--3 | +--5 Set> putStrLn$ showTreeWith False True \$ fromDistinctAscList [1..5]
+--5
|
4
|
|  +--3
|  |
+--2
|
+--1

valid :: Ord a => Set a -> Bool Source #

O(n). Test if the internal set structure is valid.