graphviz-2999.10.0.1: Graphviz bindings for Haskell.




This is the top-level module for the graphviz library. It provides functions to convert Graphs into the Dot language used by the Graphviz suite of programs (as well as a limited ability to perform the reverse operation).

Information about Graphviz and the Dot language can be found at:


Conversion from graphs to Dot format.

Specifying parameters.

data GraphvizParams nl el cl l Source

Defines the parameters used to convert a Graph into a DotRepr.

A value of type GraphvizParams nl el cl l indicates that the Graph has node labels of type nl, edge labels of type el, corresponding clusters of type cl and after clustering the nodes have a label of type l (which may or may not be the same as nl).

The clustering in clusterBy can be to arbitrary depth.




isDirected :: Bool

True if the Graph is directed; False otherwise.

globalAttributes :: [GlobalAttributes]

The top-level global Attributes for the entire Graph.

clusterBy :: LNode nl -> LNodeCluster cl l

A function to specify which cluster a particular LNode is in.

clusterID :: cl -> Maybe GraphID

The GraphID for a cluster.

fmtCluster :: cl -> [GlobalAttributes]

Specify which global attributes are applied in the given cluster.

fmtNode :: LNode l -> Attributes

The specific Attributes for that LNode.

fmtEdge :: LEdge el -> Attributes

The specific Attributes for that LEdge.

defaultParams :: GraphvizParams nl el cl nlSource

A default GraphvizParams value which assumes the graph is directed, contains no clusters and has no Attributes set.

If you wish to have the labels of the nodes after applying clusterBy to have a different from before clustering, then you will have to specify your own GraphvizParams value from scratch.

nonClusteredParams :: GraphvizParams nl el () nlSource

A variant of defaultParams that enforces that the clustering type is '()'; this avoids problems when using defaultParams internally within a function without any constraint on what the clustering type is.

blankParams :: GraphvizParams nl el cl lSource

A GraphvizParams value where every field is set to undefined. This is useful when you have a function that will set some of the values for you (e.g. setDirectedness) but you don't want to bother thinking of default values to set in the meantime.

setDirectedness :: (Ord el, Graph gr) => (GraphvizParams nl el cl l -> gr nl el -> a) -> GraphvizParams nl el cl l -> gr nl el -> aSource

Determine if the provided Graph is directed or not and set the value of isDirected appropriately.

Converting graphs.

graphToDot :: (Ord cl, Graph gr) => GraphvizParams nl el cl l -> gr nl el -> DotGraph NodeSource

Convert a graph to Dot format, using the specified parameters to cluster the graph, etc.

Conversion with support for clusters.

type LNodeCluster c a = NodeCluster c (LNode a)Source

A type alias for NodeCluster that specifies that the node value is an LNode.

data NodeCluster c a Source

Define into which cluster a particular node belongs. Clusters can be nested to arbitrary depth.


N a

Indicates the actual Node in the Graph.

C c (NodeCluster c a)

Indicates that the NodeCluster is in the Cluster c.


(Show c, Show a) => Show (NodeCluster c a) 

Pseudo-inverse conversion.

dotToGraph :: (DotRepr dg Node, Graph gr) => dg Node -> gr Attributes AttributesSource

A pseudo-inverse to graphToDot; "pseudo" in the sense that the original node and edge labels aren't able to be reconstructed.

Graph augmentation.

The following functions provide support for passing a Graph through the appropriate GraphvizCommand to augment the Graph by adding positional information, etc.

Please note that there are some restrictions on this: to enable support for multiple edges between two nodes, the Comment Attribute is used to provide a unique identifier for each edge. As such, you should not set this Attribute for any LEdge.

Note that the reason that most of these functions do not have unsafePerformIO applied to them is because if you set a global Attribute of:

    Start (StartStyle RandomStyle)

then it will not necessarily be referentially transparent (ideally, no matter what the seed is, it will still eventually be drawn to the same optimum, but this can't be guaranteed). As such, if you are sure that you're not using such an Attribute, then you should be able to use unsafePerformIO directly in your own code.

type AttributeNode nl = (Attributes, nl)Source

Augment the current node label type with the Attributes applied to that node.

type AttributeEdge el = (Attributes, el)Source

Augment the current edge label type with the Attributes applied to that edge.

Customisable augmentation.

graphToGraph :: (Ord cl, Graph gr) => GraphvizParams nl el cl l -> gr nl el -> IO (gr (AttributeNode nl) (AttributeEdge el))Source

Run the appropriate Graphviz command on the graph to get positional information and then combine that information back into the original graph.

Quick augmentation.

dotizeGraph :: (Ord cl, Graph gr) => GraphvizParams nl el cl l -> gr nl el -> gr (AttributeNode nl) (AttributeEdge el)Source

This is a "quick-and-dirty" graph augmentation function that sets no Attributes and thus should be referentially transparent and is wrapped in unsafePerformIO.

Note that the provided GraphvizParams is only used for isDirected, clusterBy and clusterID.

Manual augmentation.

This section allows you to manually augment graphs by providing fine-grained control over the augmentation process (the standard augmentation functions compose these together). Possible reasons for manual augmentation are:

Note that whilst these functions provide you with more control, you must be careful how you use them: if you use the wrong DotRepr for a Graph, then the behaviour of augmentGraph (and all functions that use it) is undefined. The main point is to make sure that the defined DotNode and DotEdge values aren't removed (or their ID values - or the Comment Attribute for the DotEdges - altered) to ensure that it is possible to match up the nodes and edges in the Graph with those in the DotRepr.

data EdgeID el Source

Used to augment an edge label with a unique identifier.


Eq el => Eq (EdgeID el) 
Ord el => Ord (EdgeID el) 
Show el => Show (EdgeID el) 

addEdgeIDs :: Graph gr => gr nl el -> gr nl (EdgeID el)Source

Add unique edge identifiers to each label. This is useful for when multiple edges between two nodes need to be distinguished.

setEdgeComment :: (LEdge el -> Attributes) -> LEdge (EdgeID el) -> AttributesSource

Add the Comment to the list of attributes containing the value of the unique edge identifier.

dotAttributes :: (Graph gr, DotRepr dg Node) => Bool -> gr nl (EdgeID el) -> dg Node -> IO (gr (AttributeNode nl) (AttributeEdge el))Source

Pass the DotRepr through the relevant command and then augment the Graph that it came from.

augmentGraph :: (Graph gr, DotRepr dg Node) => gr nl (EdgeID el) -> dg Node -> gr (AttributeNode nl) (AttributeEdge el)Source

Use the Attributes in the provided DotGraph to augment the node and edge labels in the provided Graph. The unique identifiers on the edges are also stripped off.

Please note that the behaviour for this function is undefined if the DotGraph does not come from the original Graph (either by using a conversion function or by passing the result of a conversion function through a GraphvizCommand via the DotOutput or similar).

Utility functions

prettyPrint :: DotRepr dg n => dg n -> IO StringSource

Pretty-print the DotGraph by passing it through the Canon output type (which produces "canonical" output). This is required because the printDotGraph function (and all printing functions in Data.GraphViz.Types.Printing) no longer uses indentation (this is to ensure the Dot code is printed correctly due to the limitations of the Pretty Printer used).

This will call error if an error occurs when calling the relevant GraphvizCommand: likely causes are that Graphviz suite isn't installed, or it has an Image or HtmlImg Attribute that references an image that can't be found from the working directory.

prettyPrint' :: DotRepr dg n => dg n -> StringSource

The unsafePerformIOd version of prettyPrint. Graphviz should always produce the same pretty-printed output, so this should be safe. However, it is not recommended to use it in production code, just for testing purposes.

canonicalise :: (DotRepr dg n, DotRepr DotGraph n) => dg n -> IO (DotGraph n)Source

Convert the DotRepr into its canonical form. This should work as it appears that the prettyPrinted form is always in the format of a DotGraph, but the Graphviz code hasn't been examined to verify this.

preview :: (Ord el, Graph gr) => gr nl el -> IO ()Source

Quickly visualise a graph using the Xlib GraphvizCanvas.

Re-exporting other modules.