hackage-security-0.6.2.6: Hackage security library
Safe HaskellSafe-Inferred
LanguageHaskell2010

Hackage.Security.Util.Path

Description

A more type-safe version of file paths

This module is intended to replace imports of System.FilePath, and additionally exports thin wrappers around common IO functions. To facilitate importing this module unqualified we also re-export some definitions from System.IO (importing both would likely lead to name clashes).

Note that his module does not import any other modules from Hackage.Security; everywhere else we use Path instead of FilePath directly.

Synopsis

Paths

newtype Path a Source #

Paths

A Path is simply a FilePath with a type-level tag indicating where this path is rooted (relative to the current directory, absolute path, relative to a web domain, whatever). Most operations on Path are just lifted versions of the operations on the underlying FilePath. The tag however allows us to give a lot of operations a more meaningful type. For instance, it does not make sense to append two absolute paths together; instead, we can only append an unrooted path to another path. It also means we avoid bugs where we use one kind of path where we expect another.

Constructors

Path FilePath 

Instances

Instances details
Monad m => FromObjectKey m (Path root) Source # 
Instance details

Defined in Hackage.Security.Util.JSON

Methods

fromObjectKey :: String -> m (Maybe (Path root)) Source #

Monad m => ToObjectKey m (Path root) Source # 
Instance details

Defined in Hackage.Security.Util.JSON

Methods

toObjectKey :: Path root -> m String Source #

Show (Path a) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Methods

showsPrec :: Int -> Path a -> ShowS #

show :: Path a -> String #

showList :: [Path a] -> ShowS #

Eq (Path a) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Methods

(==) :: Path a -> Path a -> Bool #

(/=) :: Path a -> Path a -> Bool #

Ord (Path a) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Methods

compare :: Path a -> Path a -> Ordering #

(<) :: Path a -> Path a -> Bool #

(<=) :: Path a -> Path a -> Bool #

(>) :: Path a -> Path a -> Bool #

(>=) :: Path a -> Path a -> Bool #

max :: Path a -> Path a -> Path a #

min :: Path a -> Path a -> Path a #

Pretty (Path CacheRoot) Source # 
Instance details

Defined in Hackage.Security.TUF.Paths

Pretty (Path IndexRoot) Source # 
Instance details

Defined in Hackage.Security.TUF.Paths

Pretty (Path RepoRoot) Source # 
Instance details

Defined in Hackage.Security.TUF.Paths

Pretty (Path Absolute) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Pretty (Path HomeDir) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Pretty (Path Relative) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Pretty (Path Tar) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Methods

pretty :: Path Tar -> String Source #

Pretty (Path Unrooted) Source # 
Instance details

Defined in Hackage.Security.Util.Path

castRoot :: Path root -> Path root' Source #

Reinterpret the root of a path

This literally just changes the type-level tag; use with caution!

FilePath-like operations on paths with arbitrary roots

(<.>) :: Path a -> String -> Path a Source #

Unrooted paths

data Unrooted Source #

Type-level tag for unrooted paths

Unrooted paths need a root before they can be interpreted.

Instances

Instances details
Pretty (Path Unrooted) Source # 
Instance details

Defined in Hackage.Security.Util.Path

rootPath :: Path Unrooted -> Path root Source #

Reinterpret an unrooted path

This is an alias for castRoot; see comments there.

unrootPath :: Path root -> Path Unrooted Source #

Forget a path's root

This is an alias for castRoot; see comments there.

toUnrootedFilePath :: Path Unrooted -> FilePath Source #

Convert a relative/unrooted Path to a FilePath (using POSIX style directory separators).

See also toAbsoluteFilePath

fromUnrootedFilePath :: FilePath -> Path Unrooted Source #

Convert from a relative/unrooted FilePath (using POSIX style directory separators).

fragment :: String -> Path Unrooted Source #

A path fragment (like a single directory or filename)

File-system paths

data Relative Source #

Instances

Instances details
FsRoot Relative Source # 
Instance details

Defined in Hackage.Security.Util.Path

Pretty (Path Relative) Source # 
Instance details

Defined in Hackage.Security.Util.Path

data Absolute Source #

Instances

Instances details
FsRoot Absolute Source # 
Instance details

Defined in Hackage.Security.Util.Path

Pretty (Path Absolute) Source # 
Instance details

Defined in Hackage.Security.Util.Path

data HomeDir Source #

Instances

Instances details
FsRoot HomeDir Source # 
Instance details

Defined in Hackage.Security.Util.Path

Pretty (Path HomeDir) Source # 
Instance details

Defined in Hackage.Security.Util.Path

class FsRoot root where Source #

A file system root can be interpreted as an (absolute) FilePath

Methods

toAbsoluteFilePath :: Path root -> IO FilePath Source #

Convert a Path to an absolute FilePath (using native style directory separators).

data FsPath Source #

Abstract over a file system root

see fromFilePath

Constructors

forall root.FsRoot root => FsPath (Path root) 

Conversions

Wrappers around System.IO

withFile :: FsRoot root => Path root -> IOMode -> (Handle -> IO r) -> IO r Source #

Wrapper around withFile

openTempFile' :: FsRoot root => Path root -> String -> IO (Path Absolute, Handle) Source #

Wrapper around openBinaryTempFileWithDefaultPermissions

NOTE: The caller is responsible for cleaning up the temporary file.

Wrappers around Data.ByteString

Wrappers around System.Directory

copyFile :: (FsRoot root, FsRoot root') => Path root -> Path root' -> IO () Source #

createDirectory :: FsRoot root => Path root -> IO () Source #

removeDirectory :: FsRoot root => Path root -> IO () Source #

doesFileExist :: FsRoot root => Path root -> IO Bool Source #

removeFile :: FsRoot root => Path root -> IO () Source #

getDirectoryContents :: FsRoot root => Path root -> IO [Path Unrooted] Source #

Return the immediate children of a directory

Filters out "." and "..".

getRecursiveContents :: FsRoot root => Path root -> IO [Path Unrooted] Source #

Recursive traverse a directory structure

Returns a set of paths relative to the directory specified. The list is lazily constructed, so that directories are only read when required. (This is also essential to ensure that this function does not build the entire result in memory before returning, potentially running out of heap.)

renameFile Source #

Arguments

:: (FsRoot root, FsRoot root') 
=> Path root

Old

-> Path root'

New

-> IO () 

Wrappers around Codec.Archive.Tar

data Tar Source #

Instances

Instances details
Pretty (Path Tar) Source # 
Instance details

Defined in Hackage.Security.Util.Path

Methods

pretty :: Path Tar -> String Source #

tarAppend Source #

Arguments

:: (FsRoot root, FsRoot root') 
=> Path root

Path of the .tar file

-> Path root'

Base directory

-> [Path Tar]

Files to add, relative to the base dir

-> IO () 

Wrappers around Network.URI

data Web Source #

Re-exports

data IOMode #

Instances

Instances details
Enum IOMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.IOMode

Ix IOMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.IOMode

Read IOMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.IOMode

Show IOMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.IOMode

Eq IOMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.IOMode

Methods

(==) :: IOMode -> IOMode -> Bool #

(/=) :: IOMode -> IOMode -> Bool #

Ord IOMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.IOMode

data BufferMode #

Three kinds of buffering are supported: line-buffering, block-buffering or no-buffering. These modes have the following effects. For output, items are written out, or flushed, from the internal buffer according to the buffer mode:

  • line-buffering: the entire output buffer is flushed whenever a newline is output, the buffer overflows, a hFlush is issued, or the handle is closed.
  • block-buffering: the entire buffer is written out whenever it overflows, a hFlush is issued, or the handle is closed.
  • no-buffering: output is written immediately, and never stored in the buffer.

An implementation is free to flush the buffer more frequently, but not less frequently, than specified above. The output buffer is emptied as soon as it has been written out.

Similarly, input occurs according to the buffer mode for the handle:

  • line-buffering: when the buffer for the handle is not empty, the next item is obtained from the buffer; otherwise, when the buffer is empty, characters up to and including the next newline character are read into the buffer. No characters are available until the newline character is available or the buffer is full.
  • block-buffering: when the buffer for the handle becomes empty, the next block of data is read into the buffer.
  • no-buffering: the next input item is read and returned. The hLookAhead operation implies that even a no-buffered handle may require a one-character buffer.

The default buffering mode when a handle is opened is implementation-dependent and may depend on the file system object which is attached to that handle. For most implementations, physical files will normally be block-buffered and terminals will normally be line-buffered.

Constructors

NoBuffering

buffering is disabled if possible.

LineBuffering

line-buffering should be enabled if possible.

BlockBuffering (Maybe Int)

block-buffering should be enabled if possible. The size of the buffer is n items if the argument is Just n and is otherwise implementation-dependent.

Instances

Instances details
Read BufferMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Handle.Types

Show BufferMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Handle.Types

Eq BufferMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Handle.Types

Ord BufferMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Handle.Types

data Handle #

Haskell defines operations to read and write characters from and to files, represented by values of type Handle. Each value of this type is a handle: a record used by the Haskell run-time system to manage I/O with file system objects. A handle has at least the following properties:

  • whether it manages input or output or both;
  • whether it is open, closed or semi-closed;
  • whether the object is seekable;
  • whether buffering is disabled, or enabled on a line or block basis;
  • a buffer (whose length may be zero).

Most handles will also have a current I/O position indicating where the next input or output operation will occur. A handle is readable if it manages only input or both input and output; likewise, it is writable if it manages only output or both input and output. A handle is open when first allocated. Once it is closed it can no longer be used for either input or output, though an implementation cannot re-use its storage while references remain to it. Handles are in the Show and Eq classes. The string produced by showing a handle is system dependent; it should include enough information to identify the handle for debugging. A handle is equal according to == only to itself; no attempt is made to compare the internal state of different handles for equality.

Instances

Instances details
Show Handle

Since: base-4.1.0.0

Instance details

Defined in GHC.IO.Handle.Types

Eq Handle

Since: base-4.1.0.0

Instance details

Defined in GHC.IO.Handle.Types

Methods

(==) :: Handle -> Handle -> Bool #

(/=) :: Handle -> Handle -> Bool #

data SeekMode #

A mode that determines the effect of hSeek hdl mode i.

Constructors

AbsoluteSeek

the position of hdl is set to i.

RelativeSeek

the position of hdl is set to offset i from the current position.

SeekFromEnd

the position of hdl is set to offset i from the end of the file.

Instances

Instances details
Enum SeekMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Device

Ix SeekMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Device

Read SeekMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Device

Show SeekMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Device

Eq SeekMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Device

Ord SeekMode

Since: base-4.2.0.0

Instance details

Defined in GHC.IO.Device

hSetBuffering :: Handle -> BufferMode -> IO () #

Computation hSetBuffering hdl mode sets the mode of buffering for handle hdl on subsequent reads and writes.

If the buffer mode is changed from BlockBuffering or LineBuffering to NoBuffering, then

  • if hdl is writable, the buffer is flushed as for hFlush;
  • if hdl is not writable, the contents of the buffer is discarded.

This operation may fail with:

  • isPermissionError if the handle has already been used for reading or writing and the implementation does not allow the buffering mode to be changed.

hClose :: Handle -> IO () #

Computation hClose hdl makes handle hdl closed. Before the computation finishes, if hdl is writable its buffer is flushed as for hFlush. Performing hClose on a handle that has already been closed has no effect; doing so is not an error. All other operations on a closed handle will fail. If hClose fails for any reason, any further operations (apart from hClose) on the handle will still fail as if hdl had been successfully closed.

hClose is an interruptible operation in the sense described in Control.Exception. If hClose is interrupted by an asynchronous exception in the process of flushing its buffers, then the I/O device (e.g., file) will be closed anyway.

hFileSize :: Handle -> IO Integer #

For a handle hdl which attached to a physical file, hFileSize hdl returns the size of that file in 8-bit bytes.

hSeek :: Handle -> SeekMode -> Integer -> IO () #

Computation hSeek hdl mode i sets the position of handle hdl depending on mode. The offset i is given in terms of 8-bit bytes.

If hdl is block- or line-buffered, then seeking to a position which is not in the current buffer will first cause any items in the output buffer to be written to the device, and then cause the input buffer to be discarded. Some handles may not be seekable (see hIsSeekable), or only support a subset of the possible positioning operations (for instance, it may only be possible to seek to the end of a tape, or to a positive offset from the beginning or current position). It is not possible to set a negative I/O position, or for a physical file, an I/O position beyond the current end-of-file.

This operation may fail with: